Team Associated 12mm Heavy Duty Ballstud Set (8) – Part 91050Maximum Strength. Extended Reach. Race Proven. The Team Associated 12mm Heavy Duty Ballstud Set (91050) is a direct replacement for SC10 4x4, B5, B5M, and other compatible platforms. With a longer 12mm thread length, these ballstuds are ideal for use in high-stress suspension and steering locations where extra bite and thread engagement are needed. ✅ Set of 8 heavy-duty 12mm ballstuds✅ OEM fit for SC10 4x4, B5, B5M, and more✅ Extra length (12mm) – for deeper mounting and improved strength✅ Precision-machined for smooth articulation and ball cup fit✅ Perfect for tuning camber links, steering arms, and shock setups 📦 Includes: (8) 12mm Heavy Duty Ballstuds Part #: 91050 💡 Pro Tip: Use longer ballstuds in plastic mounts or when adding spacers to maintain thread engagement and strength.

Read more less

Upgrade your Team Associated B74 platform with increased stability and improved corner speed using the +1.5mm offset front buggy wheels. Designed especially for high-grip carpet racing, these wheels widen the front track width for better handling, smoother steering response, and added confidence through fast corners. Key Features• +1.5mm wider offset per side (+3.0mm total track width) for maximum stability• Ideal for carpet racing and select dirt track conditions• Molded air vent holes for proper tire performance• +1.5 offset identification molded inside wheel• Durable race-proven construction• Fluorescent Yellow finish Specifications• Hex Size: 12mm• Wheel Size: 2.2" 4WD Front• Offset: +1.5mm• Color: Yellow Includes• (2) Team Associated 2.2" 4WD Front +1.5mm Buggy Wheels Perfect for racers looking to squeeze out extra corner speed and front-end stability on modern high-bite tracks.    

Read more less

The slim front wheels are designed for use with all popular carpet and AstroTurf surface tires. It features the same offset as the popular ASC9691 and ASC9690 2WD front wheels, only with an optimized profile. The wheels are textured on the gluing surface for secure tire mounting and have a smooth polished face for a factory team look. They are lightweight, yet stiff to reduce wheel deflection under hard cornering.  Features:  Slim profile for carpet and AstroTurf(TM) tires Lightweight and rigid Textured gluing surface for secure tire mounting 12mm hex Fits RC10B6 and B6D Available in White (ASC91757) Yellow (ASC91758)

Read more less

This is a pack of two Team Associated Hex Dish 1/10 Stadium Truck Wheels, and are intended for use with the Associated RC10T4.2 1/10 stadium truck. These wheels can also be used with the standard T4 and T4.1 when converted to 12mm hex drive. To convert your truck to use the hex drive front axles, the following parts need to be used: ASC7854 Front Axle ASC9880 Steering Block, Hex ASC4449 4-40 Aluminum Locknut ASC7856 Wheel Hex Adapters, OR ASC9892 12mm Aluminum Clamping Wheel Hex (qty 2 needed)  COMPATIBILITY: Team Associated RC10 T4Team Associated RC10 T4.1Team Associated RC10 T4.2Team Associated RC10 T4.3Team Associated RC10 T5MTeam Associated RC10 T6.1Tekno RC ET410Yokomo YZ-2 T

Read more less

Team Associated 13mm Front Shock Spring. These optional springs are intended for the Team Associated B6.4D and the B6.4. Package includes two springs. Effects of Shock Spring Changes  Shock Spring  Characteristic  Softer Increased Chassis Roll Increased Traction Better in Bumpy Conditions More Likely to Bottom Out  Stiffer Decreased Chassis Roll Decreased Traction Increased Responsiveness COMPATIBILITY: Team Associated RC10 B74.2Team Associated RC10 B74.2DTeam Associated RC10B6.4Team Associated RC10B6.4D

Read more less

Team Associated 13mm Front Shock Spring (Blue/4.80lbs) (54mm) [71162] 🚀 Soak up the bumps. Stick the landing. These 13mm Front Shock Springs are built for serious performance on your T6.2 or SC6.2 when upgraded to 13mm shocks. With a 4.80 lb/in rate and 54mm length, they strike the perfect balance—soft enough for buttery-smooth cornering, firm enough to eat up big landings. Upgrade your front-end feel and dial in that confidence. 🔥 Features:✅ Blue rate: 4.80 lbs/in✅ Length: 54mm✅ Perfect for 13mm shocks✅ Great low-speed feel + high-speed support✅ Includes 2 springs 📦 Part Number: 71162🏁 Brand: Team Associated

Read more less

Team Associated 13mm Front Shock Spring. These replacement springs are intended for the Team Associated B6.4D, however, it will also work with the Team Associated B6.4 as a tuning option. Package includes two springs. Effects of Shock Spring Changes  Shock Spring  Characteristic  Softer Increased Chassis Roll Increased Traction Better in Bumpy Conditions More Likely to Bottom Out  Stiffer Decreased Chassis Roll Decreased Traction Increased Responsiveness COMPATIBILITY: Team Associated RC10 B74.2Team Associated RC10 B74.2DTeam Associated RC10B6.4Team Associated RC10B6.4D

Read more less

Team Associated 13mm Front Shock Spring (Grey/4.60lbs) (54mm) [71161]🛞 Dial in that perfect front-end feel!Upgrade your T6.2 or SC6.2 with the 13mm Front Shock Springs in Grey (4.60 lbs/in). At 54mm long, these springs are engineered for plush low-speed bump absorption and strong high-speed support. That means more grip, better landings, and next-level consistency lap after lap.💥 Features:✅ Grey rate: 4.60 lbs/in✅ Length: 54mm✅ Designed for 13mm bore shocks✅ Ideal balance of soft feel and responsive support✅ Includes 2 springs📦 Part Number: 71161🏁 Brand: Team Associated

Read more less

Team Associated 13mm Front Shock Spring. These optional springs are intended for the Team Associated B6.4D and the B6.4. Package includes two springs. Effects of Shock Spring Changes  Shock Spring  Characteristic  Softer Increased Chassis Roll Increased Traction Better in Bumpy Conditions More Likely to Bottom Out  Stiffer Decreased Chassis Roll Decreased Traction Increased Responsiveness COMPATIBILITY: Team Associated RC10 B74.2Team Associated RC10 B74.2DTeam Associated RC10B6.4Team Associated RC10B6.4D

Read more less

Team Associated 13mm Front Shock Spring. These replacement springs are intended for the Team Associated B6.4, however, they will also work with the Team Associated B6.4D as a tuning option. Package includes two springs. Effects of Shock Spring Changes  Shock Spring  Characteristic  Softer Increased Chassis Roll Increased Traction Better in Bumpy Conditions More Likely to Bottom Out  Stiffer Decreased Chassis Roll Decreased Traction Increased Responsiveness COMPATIBILITY: Team Associated RC10 B74.2Team Associated RC10 B74.2DTeam Associated RC10B6.4Team Associated RC10B6.4D

Read more less

Team Associated 13mm Front Shock Spring. These replacement springs are intended for the Team Associated B6.4, however, they will also work with the Team Associated B6.4D as a tuning option. Package includes two springs. Effects of Shock Spring Changes  Shock Spring  Characteristic  Softer Increased Chassis Roll Increased Traction Better in Bumpy Conditions More Likely to Bottom Out  Stiffer Decreased Chassis Roll Decreased Traction Increased Responsiveness COMPATIBILITY: Team Associated RC10B6.4Team Associated RC10B6.4D

Read more less

Team Associated 13mm Front Shock Spring. These optional springs are intended for the Team Associated B6.4D and the B6.4. Package includes two springs. Effects of Shock Spring Changes  Shock Spring  Characteristic  Softer Increased Chassis Roll Increased Traction Better in Bumpy Conditions More Likely to Bottom Out  Stiffer Decreased Chassis Roll Decreased Traction Increased Responsiveness COMPATIBILITY: Team Associated RC10 B74.2Team Associated RC10 B74.2DTeam Associated RC10B6.4Team Associated RC10B6.4D

Read more less

Team Associated 13mm Front Shock Spring (White/4.40lbs) (54mm) [71160]🛠️ Tuned for precision. Built for performance.Upgrade your T6.2 or SC6.2 with these 13mm Front Shock Springs and feel the difference! Rated at 4.40 lbs/in and measuring 54mm, these white springs deliver buttery-smooth handling with serious jump support. Soft in the corners, firm on impact—just how you want it.💥 Features:✅ White rate: 4.40 lbs/in✅ Length: 54mm✅ Designed for 13mm shocks✅ Optimized for balance between grip and control✅ Includes 2 springs📦 Part Number: 71160🏁 Brand: Team Associated

Read more less

Team Associated 13mm Front Shock Spring. These optional springs are intended for the Team Associated B6.4D and the B6.4. Package includes two springs. Effects of Shock Spring Changes  Shock Spring  Characteristic  Softer Increased Chassis Roll Increased Traction Better in Bumpy Conditions More Likely to Bottom Out  Stiffer Decreased Chassis Roll Decreased Traction Increased Responsiveness COMPATIBILITY: Team Associated RC10 B74.2Team Associated RC10 B74.2DTeam Associated RC10B6.4Team Associated RC10B6.4D

Read more less

Team Associated 13mm Rear Shock Spring. These replacement springs are intended for the Team Associated B6.4, however, they will also work with the Team Associated B6.4D as a tuning option. Package includes two springs. Effects of Shock Spring Changes  Shock Spring  Characteristic  Softer Increased Chassis Roll Increased Traction Better in Bumpy Conditions More Likely to Bottom Out  Stiffer Decreased Chassis Roll Decreased Traction Increased Responsiveness COMPATIBILITY: Team Associated RC10B6.4Team Associated RC10B6.4D

Read more less

Team Associated 13mm Rear Shock Spring. These optional springs are intended for the Team Associated B6.4D and the B6.4. Package includes two springs. Effects of Shock Spring Changes  Shock Spring  Characteristic  Softer Increased Chassis Roll Increased Traction Better in Bumpy Conditions More Likely to Bottom Out  Stiffer Decreased Chassis Roll Decreased Traction Increased Responsiveness COMPATIBILITY: Team Associated RC10 B74.2Team Associated RC10 B74.2DTeam Associated RC10B6.4Team Associated RC10B6.4D

Read more less

Team Associated 13mm Rear Shock Spring (Green/2.20lbs) (72mm) [71163]🌿 Smooth rides, soft landings!Upgrade your T6.2 or SC6.2 with the 13mm Rear Shock Springs in Green (2.20 lbs/in). These 72mm springs are tuned for plush low-speed movement and firm high-speed impact absorption — ideal for maintaining grip while taming big jumps.💥 Features:✅ Green rate: 2.20 lbs/in✅ Length: 72mm✅ Engineered for 13mm shocks✅ Perfect balance of cushion and control✅ Includes 2 springs📦 Part Number: 71163🏁 Brand: Team Associated

Read more less

Team Associated 13mm Rear Shock Spring. These optional springs are intended for the Team Associated B6.4D and the B6.4. Package includes two springs. Effects of Shock Spring Changes  Shock Spring  Characteristic  Softer Increased Chassis Roll Increased Traction Better in Bumpy Conditions More Likely to Bottom Out  Stiffer Decreased Chassis Roll Decreased Traction Increased Responsiveness COMPATIBILITY: Team Associated RC10 B74.2Team Associated RC10 B74.2DTeam Associated RC10B6.4Team Associated RC10B6.4D

Read more less

Team Associated 13mm Rear Shock Spring (Grey/2.55lbs) (72mm) [71165] 🛞 Smoother landings. Better cornering. Upgrade your suspension game with these 13mm Rear Shock Springs from Team Associated. Designed for the T6.2 and SC6.2 when equipped with 13mm shocks, these springs deliver a plush low-speed response while still offering the support you need for big jump landings. It’s the best of both worlds—smooth over the bumps, firm on the hits. 🔥 Features:✅ Grey rate: 2.55 lbs/in✅ Length: 72mm✅ Optimized for 13mm shocks✅ Delivers soft feel with firm pack✅ Includes 2 springs 📦 Part Number: 71165🏁 Brand: Team Associated

Read more less

Team Associated 13mm Rear Shock Spring. These replacement springs springs are intended for the Team Associated B6.4D, however, they will also work with the Team Associated B6.4D as a tuning option. Package includes two springs. Effects of Shock Spring Changes  Shock Spring  Characteristic  Softer Increased Chassis Roll Increased Traction Better in Bumpy Conditions More Likely to Bottom Out  Stiffer Decreased Chassis Roll Decreased Traction Increased Responsiveness COMPATIBILITY: Team Associated RC10 B74.2Team Associated RC10 B74.2DTeam Associated RC10B6.4Team Associated RC10B6.4D

Read more less

Team Associated 13mm Rear Shock Spring (White/2.35lbs) (72mm) [71164]⚪ Land smoother. Drive sharper.These 13mm Rear Shock Springs in White (2.35 lbs/in) are made to fine-tune your T6.2 or SC6.2 suspension. Designed for 13mm shocks, they offer plush bump absorption with enough support for high-speed landings — exactly what you need for race-ready handling.💥 Features:✅ White rate: 2.35 lbs/in✅ Length: 72mm✅ Optimized for 13mm shock upgrades✅ Soft on bumps, strong on landings✅ Includes 2 springs📦 Part Number: 71164🏁 Brand: Team Associated

Read more less

Team Associated 13mm Rear Shock Spring. These optional springs are intended for the Team Associated B6.4D and the B6.4. Package includes two springs. Effects of Shock Spring Changes  Shock Spring  Characteristic  Softer Increased Chassis Roll Increased Traction Better in Bumpy Conditions More Likely to Bottom Out  Stiffer Decreased Chassis Roll Decreased Traction Increased Responsiveness COMPATIBILITY: Team Associated RC10B6.4Team Associated RC10B6.4D

Read more less

Keep your suspension performing at its best with the Team Associated 13mm Shock Rebuild Kit. Designed specifically for the B6.4 and B6.4D, this kit includes the essential O-rings and plastic bushings needed to refresh four shocks, restoring smooth, consistent performance on the track. Whether you're doing preventative maintenance or reacting to wear, this factory replacement kit ensures a proper fit and reliable sealing for optimal shock operation. 🛠️ Features Genuine Team Associated replacement parts Restores smooth and consistent shock performance Designed for 13mm shocks Fits Team Associated B6.4 / B6.4D platforms Enough components to service four shocks 📦 Includes O-rings (for four shocks) Plastic bushings (for four shocks) 🔧 Compatibility Team Associated B6.4 Team Associated B6.4D

Read more less

  Upgrade your slipper clutch with the Team Associated 19mm Octalock Slipper Pad. Featuring the Octalock design, this pad offers improved consistency, smoother power delivery, and longer-lasting performance compared to standard slipper pads. ✅ Octalock Design – Delivers smoother engagement and improved slipper consistency✅ Durable Material – Built to handle high power and repeated use✅ Direct OEM Replacement – Genuine Team Associated part for perfect fitment Includes: (1) 19mm Octalock Slipper Pad Compatibility: Team Associated vehicles equipped with 19mm Octalock spur gears and slipper assemblies (B6.2, B6.3, B6.4, T6.2, T6.4, SC6.2, SC6.4, and B74 series) Check your manual for exact fitment Part #: 92288

Read more less

Upgrade your rear setup with genuine Team Associated 2.2" Rear Hex Wheels, designed for 1/10 scale buggies running a 12mm hex configuration. Built for strength, precision, and consistent performance, these wheels are a proven choice for racers who demand reliability under hard cornering and high grip conditions. Engineered with AE’s smart reinforcement design, these wheels maintain stiffness while minimizing unnecessary weight — keeping your buggy responsive and true through every lap. Features 2.2" rear buggy wheels 12mm hex design Additional concentric ring rib increases stiffness Reduces wheel deflection under hard cornering Glue catch step along rim perimeter Larger bonding surface for stronger tire adhesion True-spinning, race-ready construction Color Options White – 9695 Yellow – 9696 Compatibility Team Associated B4.1 (with optional 12mm hexes) Team Losi Racing 22 Kyosho RB5 Any 1/10 buggy using 12mm hex rear wheels Built for racers who push hard and demand consistency — strong, stiff, and ready for the podium. 🏁  

Read more less

Team Associated 20mm Aluminum Clamping Servo Horn – 25T (Futaba/Savox/ProTek) – Part 1368Smooth Response. Secure Fit. Built to Perform. The Team Associated 20mm Aluminum Clamping Servo Horn (1368) is crafted from 7075 T6 aluminum for strength and precision. Designed for 25T spline servos (Futaba, Savox, ProTek, and others), this horn features a secure clamping design and a 20mm length that delivers smoother, more controlled steering input—ideal for 1/10 scale touring cars and competition setups. ✅ 7075 T6 aluminum construction – lightweight and incredibly strong✅ 20mm length – delivers smoother, more progressive steering feel✅ Clamping design – prevents spline slop and servo damage✅ Laser-etched spline size – easy, accurate identification✅ Compatible with Futaba, Savox, ProTek (25T spline)✅ Includes large M2.5 screw for secure clamp fit 📦 Includes: (1) 20mm Aluminum Clamping Servo Horn (25T) (1) M2.5 Clamp Screw Part #: 1368 💡 Pro Tip: Always torque the clamp screw securely to lock in performance and reduce servo spline wear.

Read more less

Team Associated 23mm Carbon Fiber Front Shock Tower – RC10B74.1 Lightweight. Strong. Race-Ready. The RC10B74.1 23mm Carbon Fiber Front Shock Tower is a precision-cut replacement part designed specifically for Team Associated B74.1 and B74.1D 1/10 scale 4WD buggies. Crafted from high-quality carbon fiber, it offers strength without the weight—essential for competitive performance. ⚙️ Features: 🪶 Lightweight carbon fiber construction 🛡️ Durable and race-proven material 📏 23mm shock mounting geometry for consistent front-end handling 📦 Includes: (1) 23mm Carbon Fiber Front Shock Tower ✅ Compatibility: Team Associated RC10B74.1 Team Associated RC10B74.1D Upgrade your buggy’s performance with official Team Associated components.

Read more less

🔧 Precision Hardware for a Clean, Flush FitKeep your RC28R in peak condition with the Team Associated 2mm Flat Head Hardware Set — a premium collection of replacement screws engineered for strength, precision, and seamless installation. ⚙️ About the Screw Set These flat head screws are designed to sit flush with the surface, offering a clean look and improved aerodynamics while maintaining a solid, vibration-resistant hold. Perfect for racers and hobbyists who demand both performance and polish from their builds. 🌟 Features Comprehensive 30-piece replacement set Flat head design for smooth, flush mounting Precision-machined threads ensure secure fastening Durable steel construction resists wear and stripping Ideal for repairs, rebuilds, or custom RC projects Includes: (30) 2mm Flat Head Hardware Screws Compatibility: Team Associated RC28R Team Associated RC28 Suitable for other 1/28-scale RC builds requiring 2mm flat head screws 🧰 Essential for every pit box — restore, rebuild, or refine your micro racer with genuine Team Associated hardware built for precision and reliability.  

Read more less

Refined torque. Tuned traction. Proven performance.The Team Associated RC10B7 3-Gear Gearbox Conversion Kit delivers a race-focused drivetrain upgrade that lets you fine-tune your buggy’s handling and power delivery. Designed for the RC10B7 and RC10B7D, and also compatible with T7 and SC7 platforms, this 3-gear layout alters torque transfer for a smoother, more balanced launch and enhanced rear-end stability. Perfect for racers chasing the edge on high-traction surfaces or looking to dial in rotation on tight tracks, the 3-gear conversion gives you the flexibility to tailor your drivetrain to your driving style. ⚙️ Features Performance-oriented 3-gear gearbox design Optimized torque response for improved traction and balance Includes notched differential height inserts for precise tuning Durable 54T idler gear with hardened idler shaft Factory-fit bearings and hardware for smooth installation CNC-machined aluminum arm mount (C) included Comprehensive kit with all mounting hardware and manual Designed for consistent durability and easy maintenance 📦 Includes (2) 3-Gear Gearbox Halves (4) Notched Differential Height Inserts (1) 54T Idler Gear (1) Idler Shaft (2) 10×15×4 mm Bearings (1) Aluminum Arm Mount (C) Full Hardware Set 3-Gear Conversion Manual ✅ Compatibility Team Associated RC10B7 / RC10B7D Team Associated T7 / SC7  

Read more less

Team Associated 3.5mm Ballcups – Precision Fit for B74.2 Series! 🔩 Keep your suspension smooth and responsive with the Team Associated 3.5mm Ballcups, designed specifically for RC10 B74.2 and B74.2D vehicles equipped with 3.5mm turnbuckles. These are genuine Team Associated replacement parts engineered for durability and consistent fitment under high-stress racing conditions. ⚙️ Key Features: ✅ Direct replacement for worn or damaged ballcups✅ Includes 12 straight and 2 offset ballcups for full coverage✅ Designed for 3.5mm turnbuckles✅ Durable molded construction for long-lasting performance✅ Easy install with precision fitment for your Team Associated buggy 📦 Includes: (12) Straight 3.5mm Ballcups (2) Offset 3.5mm Ballcups (1) Ballcup Parts Tree ✅ Compatibility: Team Associated RC10 B74.2 Team Associated RC10 B74.2D 🔧 Maintain peak steering and suspension performance with these factory-spec Team Associated 3.5mm Ballcups! 🏁💪

Read more less

Team Associated 3.5x35.5mm TiN Front Shock Shafts (2) Smooth Suspension. Long-Lasting Performance. Upgrade your front shocks with these 3.5x35.5mm Titanium Nitride (TiN) coated shock shafts from Team Associated. Built for durability and ultra-smooth operation, these shafts are a high-performance replacement for demanding RC conditions. 🔧 Features: ✅ Titanium Nitride Coating for reduced friction and longer lifespan ✅ Precision Ground Shafts ensure smooth shock operation ✅ 3.5mm Diameter, 35.5mm Length — front shock fitment ✅ Ideal for High-Stress Racing Conditions 📦 Includes: (2) 3.5x35.5mm TiN Front Shock Shafts 🏁 Maintain control and improve your handling with TiN strength and Factory Team precision.

Read more less

Team Associated 3.5x42mm Steel Turnbuckles. These are replacement steering and front camber link turnbuckles intended for the RC10B74.2 and B74.2D series of vehicles. Package includes two 3.5x42mm turnbuckles. COMPATIBILITY: Team Associated RC10 B74.2Team Associated RC10 B74.2D

Read more less

Team Associated 3.5x44.5mm TiN Rear Shock Shafts (2) Durability Meets Smooth Performance. These 3.5x44.5mm Titanium Nitride-coated rear shock shafts are precision replacements designed for the Team Associated RC8T4 and RC8T4e vehicles. Built to withstand the rigors of 1/8-scale racing, they deliver smooth shock movement and enhanced durability. 🔧 Features: ✅ Titanium Nitride (TiN) Coated for reduced friction and extended wear life ✅ High-Precision Fitment ensures optimal shock performance ✅ 3.5mm Diameter, 44.5mm Length — rear shock compatibility ✅ Built for RC8T4 & RC8T4e Team Associated vehicles 📦 Includes: (2) 3.5x44.5mm TiN Rear Shock Shafts 🏁 Reinforce your rear suspension with Factory Team reliability and proven performance!

Read more less

Team Associated 3.5x45mm Steel Turnbuckles. These are replacement rear camber link turnbuckles intended for the RC10B74.2 and B74.2D series of vehicles. Package includes two 3.5x45mm turnbuckles. COMPATIBILITY: Team Associated RC10 B74.2Team Associated RC10 B74.2D

Read more less

Stronger. Stiffer. Race-Ready. Upgrade your steering and camber links with the Team Associated 3.5x48 mm Steel Turnbuckles — a precision-built Factory Team option for racers who demand maximum strength and reliability. Perfect for high-stress race conditions, these heavy-duty steel links add confidence to every corner and landing. Performance Upgrade Designed to replace standard turnbuckles on the RC10B6, RC10T6, and RC10SC6 platforms, this 3.5 mm version provides added stiffness and durability when used with 3.5 mm ballcups (92308). The result is tighter handling, smoother steering response, and reduced flex over time — a must-have for competitive racers and bashers alike. Features: Heavy-duty 3.5 mm steel construction for extreme strength Increased stiffness for consistent steering geometry Works with 3.5 mm ballcups (#92308) Ideal upgrade for high-traction and high-impact racing Factory Team precision fit and finish Includes: (2) 3.5 × 48 mm Steel Turnbuckles Compatibility: Team Associated RC10 B6 series Team Associated RC10 T6 series Team Associated RC10 SC6 series Team Associated Factory Team — Engineered to Win.

Read more less

⚙️ Fine-Tune Your Suspension SetupThe Team Associated 3.8x2.0x0.25mm Ballstud Washer is a precision shim designed for racers who want ultimate control over their suspension geometry. Placed under ball studs, these ultra-thin washers allow for small but effective changes to camber-link height—helping you dial in cornering balance, traction, and steering response with pinpoint accuracy. ✅ Ultra-Thin Precision Shims – Perfect for fine-tuning camber-link angles and roll centers✅ Durable Steel Construction – Maintains shape and consistency under load✅ Micro-Adjustable Handling – Each washer equals a 0.25 mm height change for detailed setup tuning✅ Race-Proven Quality – Designed for precision and consistency across multiple chassis setups Includes: (10) 3.8x2.0x0.25 mm Ballstud Washers Compatibility: Team Associated RC28 Team Associated RC28R Suitable for other 1/28-scale and 1/10-scale platforms using 3.5 mm ball studs 🛠️ Perfect for racers looking to achieve professional-level suspension precision and performance.    

Read more less