Traxxas Differential Spool (Front/Rear) – Part #5381X🔒 Lock It In. Maximize Your Traction. Convert your differential into a full-traction setup with the Traxxas Differential Spool. Designed as an optional upgrade for the Revo and E-Maxx Monster Trucks, this spool replaces the front or rear diff to lock both wheels together for equal power distribution. Ideal for rock crawling, drag racing, and pulling where traction is everything. ✅ Eliminates differential action for maximum left/right power transfer✅ Perfect for low-traction environments: crawling, drags, or pulling✅ Can be installed in the front, rear, or both for total 4WD lock✅ Heavy-duty composite construction✅ Designed for use with ring gear TRA5379X ⚠️ Note: Spools increase drivetrain stress. Use only in off-road or low-traction conditions to avoid excessive wear on driveline components. 📦 Includes: (1) Differential Spool

Read more less

🛠️ Seal it right. Keep it tight. The Traxxas Differential/Transmission Gasket Set is a genuine replacement kit designed to maintain a proper seal between your transmission and differential components. Perfect for restoring drivetrain efficiency and preventing fluid leaks during rebuilds or repairs. ✅ Genuine Traxxas replacement part✅ Helps prevent leaks and maintain gear mesh✅ Durable material for long-lasting performance✅ Ideal for differential or transmission rebuilds 📦 Includes:• Differential/Transmission Gasket Set  

Read more less

Traxxas Drag Slash Rear Shock Tower – Part 9418Straight Launches. Strong Support. The Traxxas Rear Shock Tower (9418) is a direct replacement part for the Drag Slash, providing solid support for your rear shocks during hard launches and fast passes. Keep your suspension geometry dialed in with this OEM replacement. ✅ Designed specifically for the Traxxas Drag Slash✅ Strong molded composite construction✅ Maintains proper shock alignment and rear-end support✅ Direct bolt-on replacement – no modifications needed✅ Perfect for repairs or fresh rebuilds 📦 Includes: (1) Rear Shock Tower Part #: 9418 💡 Pro Tip: Combine with fresh shocks and wheelie bar adjustments for maximum consistency on launch.

Read more less

Traxxas E-Clips / C-Rings / Body Clips (12) Part #: 1633 | Revo-Compatible Keep your truck secure and ready for action with this Traxxas E-Clips, C-Rings, and Body Clips Pack. Designed for the Traxxas Revo and similar monster trucks, this assortment includes critical small hardware used throughout the chassis and suspension. Perfect for routine maintenance, rebuilds, or emergency trackside fixes, this kit keeps you prepared when it counts. 📦 Includes: (4) E-Clips (4) C-Rings (4) Body Clips 🔧 Compatibility: ✅ Traxxas Revo ✅ Also compatible with many other Traxxas vehicles using similar clip hardware Always check your vehicle’s manual to confirm fitment.

Read more less

Powerful. Fun. Durable. Mini Monster. Don’t let the size fool you—the 1/16 Traxxas E-Revo is a proven powerhouse in a compact package. This ready-to-run mini basher brings the full-sized E-Revo’s legendary performance to a more convenient, go-anywhere scale, without sacrificing speed, handling, or rugged durability. Equipped with the Titan 12T 550 motor and XL-2.5 waterproof ESC, this mini monster is ready for 20+ MPH action right out of the box. Its rocker-actuated suspension, GTR oil-filled shocks, and full-time 4WD deliver track-worthy handling over skateparks, dirt, or backyard terrain. Features:• Fully assembled and ready-to-run• Waterproof brushed XL-2.5 ESC and Titan 12T motor• Rocker-arm suspension with GTR oil-filled shocks• Full-time shaft-driven 4WD drivetrain• Torque-Control™ slipper clutch & sealed diffs• Up to 20+ MPH with included 6-cell NiMH battery• Dual battery compartments with quick-release doors• Includes 2-amp USB-C fast charger• Available in Red, Blue, or Red/Blue Specifications:• Scale: 1/16• Length: 12.9" (328mm)• Width: 9.4" (239mm)• Height: 4.6" (117mm)• Wheelbase: 7.9" (202mm)• Weight: 44oz (1.24kg)• Power Source: Electric• Input Voltage: 7.2V NiMH (included) / 7.4V 2S LiPo (optional)• Drive System: Shaft-driven 4WD• Gear Ratio: 5.04:1 (Final Drive: 9.72:1)• Gear Pitch: 48P Includes:• (1) 1/16 Traxxas E-Revo 4WD Monster Truck• (1) Titan 12T 550 Brushed Motor• (1) XL-2.5 Waterproof ESC• (1) 2.4GHz TQ Radio System• (1) 6-cell 7.2V NiMH Battery (w/ Traxxas iD)• (1) 2-Amp USB-C Fast Charger• (1) User Manual Needed to Complete:• (4) AA Batteries for Transmitter• Optional: Traxxas Power Adapter & USB-C Charging Cable (TRA2912 & TRA2916 – sold separately for max charging speed) Mini size. Maximum action. The 1/16 E-Revo is your go-anywhere, bash-everything RC beast.

Read more less

Overview:Keep your drivetrain running smooth with the Traxxas E-Revo VXL 2.0 Center Half Shafts. These heavy-duty composite shafts transfer power from the transmission to the differentials with strength and efficiency. Designed as genuine factory replacements, they’re built to handle the extreme power and performance of the E-Revo VXL 2.0. Features: Set of 2 center half shafts Made from durable composite material for strength and flexibility Transfers power efficiently while resisting twisting under load Genuine Traxxas replacement part for reliable performance Compatibility: Traxxas E-Revo VXL 2.0 (center driveshafts) Includes: (2) Center Half Shafts Part Number: 8655

Read more less

🔧 Built to handle the toughest hits! The Traxxas 9042 Extreme Heavy-Duty Suspension Pin Set is a must-have for owners running the 9080-series Extreme Heavy Duty Upgrade Kit. Designed for maximum durability, these screw pins keep your upgraded suspension arms firmly in place during extreme bashing sessions. Key Features: Heavy-duty steel construction for maximum strength Includes multiple lengths for complete front and rear coverage Designed specifically for the 9080-series Extreme Heavy Duty Upgrade Kit Will not fit standard suspension components 📦 Includes: (4) 3x52mm Screw Pins (2) 3x32mm Screw Pins (2) 3x40mm Screw Pins Compatibility: For use only with the Traxxas 9080-series Extreme Heavy Duty Upgrade Kit

Read more less

🔋 Traxxas EZ-Peak 2S Single Completer Pack (Charger + 5800mAh LiPo) Looking to power up your Traxxas vehicle the easy way? The EZ-Peak Completer Pack includes the trusted Traxxas EZ-Peak Plus iD Charger and a powerful 5800mAh 2S 25C LiPo battery — perfect for most 2S-compatible Traxxas RTR models. 💡 No complicated setup. Just plug in and go! ⚡ What's Inside: (1) Traxxas EZ-Peak Plus Charger (TRA2970) (1) 5800mAh 2S 25C LiPo Battery w/iD (TRA2843X) 🔌 Charger Features: iD Auto Battery Recognition for safe, easy charging Charges 2S–3S LiPo or 5–8 cell NiMH batteries Up to 4A fast charging (40W Max) Built-in balance ports — no balance boards needed Storage Mode to extend battery life Compact and reliable with AC power input 📐 Charger Specs: Input: 100–240V AC Output: 1.0–4.0A (40W Max) Dimensions: 146 x 123 x 53mm Weight: 365g 🔋 Battery Specs (TRA2843X): Type: 2S LiPo Capacity: 5800mAh Continuous Discharge: 25C (145A) Max Burst Rate: 50C (290A) Voltage: 7.4V Dimensions: 137 x 25 x 43mm Weight: 308g iD-equipped for use with Traxxas iD chargers ✅ Perfect For:Anyone who needs a complete 2S battery and charging solution for their Traxxas vehicle — especially for models like the Slash, Rustler, Bandit, Stampede, and more.

Read more less

Overview:Charge two batteries at once with the Traxxas EZ-Peak Dual 8-Amp Charger. Delivering up to 100 watts (8 amps) of charging power per side, this smart charger is designed to keep you running longer with less downtime. With Traxxas iD technology, charging is simple—just plug in any Traxxas iD battery and the charger automatically detects type, cell count, and capacity, then configures settings for a safe, optimized charge. Perfect for NiMH and LiPo packs, the EZ-Peak Dual includes advanced safety features, balance charging for LiPos, and intuitive LED indicators to keep you fully informed while charging. Features: Dual charging ports – charge two batteries at once 100W, 8A output per channel for fast charging Traxxas iD Auto-Battery Identification simplifies setup Compatible with NiMH and LiPo Traxxas iD batteries Advanced balance charging for LiPo packs LED status indicators for easy monitoring Built-in safety features for worry-free charging Compatibility: Charges all Traxxas iD-equipped batteries (NiMH and LiPo) Compatible with 5-8 cell NiMH and 2S–4S LiPo iD packs Works with popular Traxxas models including Slash, Rustler, Stampede, E-Revo, X-Maxx, and more Includes: (1) EZ-Peak Dual 8-Amp Charger Part Number: 2972

Read more less

Traxxas EZ-Peak Dual Completer Pack w/ Two 2S 7600mAh LiPo Batteries – TRA2991🔥 The ultimate power bundle for your Traxxas rig! Whether you’re bashing or racing, the EZ-Peak Dual Completer Pack gives you everything you need to charge fast and drive longer. This kit includes the Traxxas EZ-Peak Dual 100W Multi-Chemistry Charger and two 7600mAh 2S 25C Power Cell LiPo batteries with iD connectors — ready to deliver serious run time and simplicity in one package. ⚡ EZ-Peak Dual Charger Features: 💯 100W output for up to 8A charge rate 🔌 Charges two batteries at once (LiPo & NiMH, 2S–3S) 🔍 iD® Auto Battery Identification – just plug in and press start 🔧 Advanced Mode for non-iD batteries ✅ No balance leads needed for iD LiPos 🌍 AC Powered – Plug into any 100–240V outlet 📏 Size: 176 x 138 x 57mm⚖️ Weight: 575g 🔋 Power Cell 7600mAh 2S LiPo Batteries (x2): Voltage: 7.4V Capacity: 7600mAh Discharge: 25C Continuous / 50C Burst Connector: Traxxas iD Charge Rate: Up to 2C (15.2A max) Dimensions: 155 x 27 x 43mm Weight: 13.8oz (390g) each 📦 Includes: (1) Traxxas EZ-Peak Dual Charger (TRA2972) (2) 7600mAh 2S 25C LiPo Batteries (TRA2869X) 💡 Perfect for Traxxas vehicles that run one or two 2S LiPo batteries✅ Ideal for: Slash VXL, Rustler VXL, Bandit VXL, E-Revo 2.0, and more!

Read more less

Unlock faster, smarter charging for your TRX-4M with the Traxxas EZ-Peak® iD® Charger Port Adapter! Designed to work seamlessly with Traxxas EZ-Peak iD Chargers, this adapter lets you charge your TRX-4M 7.4V 2S LiPo battery with all the enhanced features—faster charge times, automatic detection, and storage charging modes. 🔋 Compatible With: TRX-4M⚡ Works With: Traxxas EZ-Peak iD Chargers✅ Enables high-speed charging✅ Allows access to iD Charger features like storage mode✅ Genuine Traxxas part for a perfect fit Upgrade your charging game and get back on the trail faster!  

Read more less

Traxxas EZ-Peak Live 4S Completer Pack (2x 6700mAh 4S LiPo Batteries + iD Dual Charger)Power Meets Intelligence – Complete Charging Solution for 4S Setups Completer Pack Overview:Unleash the full power of your high-performance Traxxas vehicles with the EZ-Peak Live 4S Completer Pack. Featuring two 6700mAh 14.8V 4-cell Power Cell LiPo batteries and the EZ-Peak Live Dual Charger, this combo is built to deliver 30+ volts of blistering brushless power and the smart charging simplicity Traxxas is known for. Whether you're powering an X-Maxx, XRT, or UDR, this is the ultimate plug-and-play performance upgrade. Why You’ll Love It: Traxxas iD® Technology: No guessing. Just plug in and charge with total confidence. Bluetooth Smart Enabled: Monitor charge status, performance, and more via the EZ-Peak Live App. Dual-Port Charging: Charge two LiPos at once—up to 4S per channel—with 200 watts of total output power. Fast Charging: MAXX Charge mode optimizes speed to get you back on the track faster. Built-In Safety: LiPo storage mode, audible alerts, and smart diagnostics for total battery protection. Charger Specs (TRA2973): Input Voltage: 100–240V AC Max Output: 200W (26A total) Battery Support: Dual 2S–4S LiPo / Dual 5–8 Cell NiMH Connectivity: Bluetooth (EZ-Peak Live App) USB Output: Built-in 2A port Dimensions: 204 x 174 x 68mm Battery Specs (TRA2890X): Type: LiPo Configuration: 4S (14.8V) Capacity: 6700mAh Discharge Rate: 25C Wiring: 12AWG Maxx Cable w/ Traxxas iD® Connector Dimensions: 185 x 50 x 44mm Weight: ~675g each In the Box:✔ (1) Traxxas EZ-Peak Live Dual iD® Battery Charger (TRA2973)✔ (2) Traxxas 4S 6700mAh 25C LiPo Batteries (TRA2890X) IMPORTANT:⚠️ For safety, only charge these batteries with a Traxxas iD-equipped charger.⚠️ Never leave LiPo batteries unattended during charging.

Read more less

Traxxas EZ-Peak® Plus Charger – 4A NiMH/LiPo w/ iD® Auto Battery Detection Fast, Safe, Smart Charging for Traxxas Batteries The Traxxas EZ-Peak® Plus 4-Amp Charger is the perfect solution for hobbyists looking for simplicity, speed, and safety. Featuring iD® Auto Battery Identification, this charger automatically configures the optimal charge settings for any Traxxas iD-equipped battery—just plug it in and press start! ⚙️ Features: ⚡ Charges 5–8 Cell NiMH or 2S–3S LiPo Traxxas iD® Batteries 🔍 iD® Auto Battery Detection – No settings to adjust or balance plugs to connect 🔒 Built-in Safety Features – Protects against overcharging and short circuits 🔥 4-Amp Fast Charging – Get back on the track quicker 🧠 Advanced High-Resolution Peak Detection – Ensures full, safe charging every time ✅ Simple One-Button Operation 🔌 Compatible Battery Types: NiMH: 5–8 cells (6.0V–9.6V) LiPo: 2S–3S (7.4V–11.1V)Traxxas iD®-equipped batteries only 📦 Includes: (1) Traxxas EZ-Peak® Plus 4A NiMH/LiPo Charger (2970) (1) Power cord Spend less time charging and more time driving—perfect for beginners and pros alike!

Read more less

  Traxxas Front & Rear Body Mount Set w/Hardware Part #: 1914R Restore or customize your Traxxas ride with this Front & Rear Body Mount Set. Designed for durability and adjustability, this set is ideal for Slash, Rustler, Stampede VXL, and Ford Raptor model trucks. Whether you're replacing broken mounts or adjusting body height, this complete set has you covered. 📦 Includes: (2) 52mm Body Posts (2) 38mm Body Posts (2) 25mm Body Posts (2) 6.5mm Body Posts (2) Body Post Extensions Replacement Hardware ✅ Features: Genuine Traxxas replacement parts Adjustable height with included extensions Strong composite construction Compatible with: Slash (standard and Ford Raptor models) Rustler & Rustler VXL Stampede VXL 🛠️ Keep your body shell mounted securely and race-ready with this complete mounting kit!

Read more less

🛡️ Protect your chassis from the rough stuff. The Traxxas Skidplate Set includes both front and rear skidplates to shield your chassis from scrapes, impacts, and debris. Made from durable molded composite material, these skidplates are a direct replacement for your stock parts and keep your truck ready for action. ✅ Genuine Traxxas replacement parts✅ Durable composite construction✅ Includes both front and rear skidplates✅ Vehicle Compatibility: • Traxxas Slash 📦 Includes:• (1) Front Skidplate (Black)• (1) Rear Skidplate (Black)

Read more less

Traxxas Front Axles (2) – Part #3637🛠️ Built Tough. Ready to Roll. Keep your front end dialed in with this set of two genuine Traxxas front axles. Whether you're replacing worn-out components or stocking up your pit box, these axles are designed to deliver the durability and performance you expect from Traxxas. ✅ Direct replacement for multiple Traxxas vehicles✅ Strong and reliable factory fit✅ Ideal for restoring smooth front-end function 📦 Includes: (2) Front Axles 💡 Pro Tip: Always inspect axles for wear or bends after hard impacts—fresh parts mean better handling!

Read more less

Traxxas Front Differential Ring & Pinion Gear Set (47T/12T) – Part #10778🔧 Smooth Power. Front-End Strength. Keep your front drivetrain running strong with this genuine Traxxas 47-tooth ring and 12-tooth pinion gear set. Designed specifically for the front differential, these gears ensure reliable power transfer and smooth performance—whether you're bashing, crawling, or racing. ✅ 47T ring gear / 12T pinion gear✅ For front planetary differentials✅ Precision-cut for smooth mesh and durability✅ OEM replacement for easy maintenance 📦 Includes: (1) 47-Tooth Differential Ring Gear (1) 12-Tooth Differential Pinion Gear  

Read more less

Traxxas Front Extreme Heavy Duty Driveshaft – Rustler 4X4 – Part 6851ABeefed-Up Strength. Bolt-On Simplicity. The Traxxas 6851A Extreme Heavy Duty Front Driveshaft Assembly is built to handle high-power brushless setups and intense off-road abuse. Pre-assembled and ready to drop in, this driveshaft fits either the left or right front side of your Rustler 4X4. ✅ Fits front left or right side – fully interchangeable✅ Extreme Heavy Duty design – upgraded strength over stock✅ Fully assembled for fast installation✅ Ideal for high-torque applications and heavy bashing✅ Includes screw pin for secure mounting 📦 Includes: (1) Assembled Front Driveshaft (Left or Right) (1) Screw Pin Part #: 6851A Fits: Rustler 4X4 Rustler 4X4 VXL Also compatible with Slash 4X4, Stampede 4X4, and others using the Extreme HD upgrade system 💡 Pro Tip: Upgrade all four corners with Extreme HD shafts for a bulletproof driveline that’s ready for anything.

Read more less

Traxxas Front Hex Wheel Hub (2) – Part #3654🔧 Keep Your Front End Dialed In. The Traxxas 3654 Front Hex Wheel Hubs are direct replacements for your worn or damaged originals. Designed for a precise factory fit, these hubs ensure your front wheels stay securely mounted and spinning true. Includes the necessary axle pins for a quick, hassle-free install. ✅ Includes two front hex hubs and two axle pins✅ Factory fit for Traxxas 2WD models✅ Keeps wheels aligned and properly secured✅ Easy to install – get back on track in minutes 📦 Includes: (2) Front Hex Wheel Hubs (2) Axle Pins 💡 Pro Tip: Always inspect your hubs and pins for wear—keeping them fresh ensures consistent handling and durability on race day.  

Read more less

Traxxas Front Shock Tower – Part 6839Reinforce Your Front End. Built to Take Hits. The Traxxas Front Shock Tower (6839) is a direct replacement part for the Slash 4X4 and related models. It mounts securely to the front bulkhead and provides stable upper mounting points for the front shocks, ensuring precise suspension performance and durability. ✅ OEM replacement part – designed specifically for Slash 4X4✅ Strong composite construction – lightweight yet impact-resistant✅ Pre-molded mounting holes – easy bolt-on install✅ Restores proper shock alignment and support✅ Compatible with stock hardware and body mounts 📦 Includes: (1) Front Shock Tower Part #: 6839 Fits: Traxxas Slash 4X4 Slash 4X4 VXL Slash 4X4 Ultimate Stampede 4X4 Rally VXL Telluride 💡 Pro Tip: Replace both front and rear towers together to ensure balanced suspension geometry and consistent handling.    

Read more less

  This is a replacement front shock tower from Traxxas. Designed for durability and precision fit, it mounts directly to the front bulkhead and provides secure upper mounting points for the front shocks. 🔧 Features: Direct replacement for stock front shock tower Provides upper shock mounting location Precision-molded from tough composite material Easy to install – bolts directly to front bulkhead 📦 Includes: (1) Front Shock Tower ✅ Compatibility: Traxxas Slash Traxxas Rustler Traxxas Bandit Traxxas Stampede

Read more less

Upgrade your X-Maxx or XRT with premium durability and style! These gray-anodized 6061-T6 aluminum suspension pin retainers offer enhanced strength and a sleek factory look. Designed to replace the stock plastic retainers, they hold the hinge pins securely at the inner upper arm position for reliable, long-lasting performance. 🔥 Includes: (4) Gray-Anodized Aluminum Suspension Pin Retainers 🏁 Features: CNC-machined from high-quality 6061-T6 aluminum Anodized gray finish for a clean, custom look Direct fit for Traxxas X-Maxx and XRT Stronger and more wear-resistant than stock plastic retainers Step up your durability game while giving your rig a custom touch with these Traxxas aluminum retainers!

Read more less

  Secure your power with confidence using the Traxxas 3727A Gray Battery Hold-Down Plate. This set includes everything you need to keep your battery firmly in place, even during the toughest runs. Built to OEM standards, it’s a direct replacement for a variety of Traxxas 2WD vehicles. ✅ Features: Durable gray composite hold-down plate Includes metal posts (2) and retaining clips (2) Keeps your battery secure during high-performance use Genuine Traxxas fit and finish 📦 Includes: (1) Gray Battery Hold-Down Plate (2) Metal Posts (2) Retaining Clips Perfect for restoring or upgrading your Traxxas ride — don’t let a loose battery ruin your bash session!  

Read more less

Fine-tune your Maxx® suspension with these GT-Maxx shock springs rated at 2.054 for a firmer feel and improved support under load. Ideal for heavier setups or aggressive terrain, these springs deliver the responsiveness and control your truck needs. ⚙️ Features: Spring Rate: 2.054 (firmer feel) Designed for GT-Maxx shocks Great for heavier setups or harder landings (2) high-performance springs per package 📦 Includes: (2) GT-Maxx Shock Springs (2.054 Rate) Customize your ride and dial in the perfect feel with Traxxas performance springs!  

Read more less

  Overview:Upgrade your suspension performance with the Traxxas GTR Assembled Shocks. Known for their silky-smooth action and race-inspired design, these shocks come fully assembled and pre-filled with shock oil, making installation fast and easy. Built from high-quality materials, they deliver consistent damping and long-lasting durability. Note: springs are not included, allowing you to select the perfect spring rate for your setup. Features: (2) Pre-assembled GTR shocks with oil Springs not included (sold separately for tuning flexibility) Aluminum bodies with PTFE-coated bores for ultra-smooth action Precision machined components for consistent performance Genuine Traxxas factory upgrade/replacement Compatibility: Traxxas Revo 3.3 Traxxas E-Revo Traxxas Summit Traxxas Slayer Pro 4x4 Other Traxxas models equipped with GTR shocks (check your manual) Includes: (2) GTR Assembled Shocks (oil-filled, no springs) Part Number: 5460

Read more less

  💪 Toughen up your drivetrain. Upgrade your Slash 4x4 with the Traxxas 6888X Hardened Steel Front Drive Hub. Built to handle extreme torque and harsh off-road conditions, this hardened steel hub delivers long-lasting durability and consistent performance where it matters most. ✅ Hardened steel construction for maximum strength✅ Precision fit for reliable operation✅ Ideal upgrade for high-power brushless setups✅ Includes screw pin for secure installation 📦 Includes:• (1) Hardened Steel Front Drive Hub• (1) Screw Pin Compatibility: Traxxas Slash 4x4

Read more less

Upgrade your drivetrain with the durability and precision of the Traxxas Hardened Steel Mod 1.0 Pinion Gear. Designed for high-power setups, this 20-tooth gear features a 5mm bore and Mod 1 tooth pitch, making it perfect for brushless applications and heavy-duty RC builds. 🔩 Includes: (1) Hardened Steel 20T Pinion Gear (Mod 1.0, 5mm bore) (1) Set Screw ✅ Features: Made from tough hardened steel for long-lasting performance Mod 1.0 pitch for compatibility with high-torque drivetrains Fits motors with 5mm output shafts Ideal for 1/8 scale vehicles and high-power brushless setups Whether you're bashing or racing, this pinion gear delivers strength and reliability when it counts.

Read more less

Upgrade your 2WD Traxxas rig with the strength to handle serious abuse. The Traxxas HD Extreme Caster Blocks are built tough for extreme off-road action, making them the perfect replacement or upgrade for Rustler®, Bigfoot®, Slash®, and Stampede® 2WD models. Whether you're bashing hard or building with the 2WD Extreme Heavy Duty Upgrade Kits (TRA9180/9181-series), these blocks deliver a secure, high-performance fit. Features:• Heavy-duty design for maximum durability• Compatible with Traxxas 2WD platforms: Rustler®, Bigfoot®, Slash®, Stampede®• Works with standard and aluminum Traxxas components• Designed for use with Extreme HD Upgrade Kits (TRA9180 & TRA9181-series)• Easy, secure installation with included hardware• Available in multiple colors for custom builds Includes:• (1) Left HD Extreme Caster Block• (1) Right HD Extreme Caster Block• (2) 3x26mm Hinge Pins• (2) 3x15mm ScrewsPart Number: 9136 When the trail gets tough, these caster blocks hold strong—Traxxas-tough, track-tested.

Read more less

Strengthen your rear end with the Traxxas HD Extreme Rear Stub Axle Carriers. Built for durability, these heavy-duty carriers are a direct fit for popular Traxxas 2WD platforms including the Rustler®, Bandit®, Slash®, Bigfoot® No. 1, Drag Slash®, and Stampede®. Whether you're bashing off-road or tearing up the track, these carriers deliver long-lasting performance and rugged support for your rear axle assembly. Perfect as replacements for worn parts or upgrades from stock components, they’re also a direct match for the Traxxas 2WD Extreme Heavy Duty Upgrade Kits (TRA9180–9182-series). Features:• Heavy-duty rear stub axle carriers for extra durability• Fits Rustler®, Bandit®, Slash®, Stampede®, Bigfoot® No. 1, Drag Slash®, and Slash Modified• Compatible with aluminum and standard Traxxas components• Works as a direct replacement for TRA9180, TRA9181, and TRA9182 kits• Available in multiple colors for custom styling Includes:• (1) Left Rear Stub Axle Carrier• (1) Right Rear Stub Axle Carrier• (2) 3x31mm Hinge Pins• (2) 3x18mm ScrewsPart Number: 9150 Hit harder, drive longer—these HD carriers are built to handle serious action.

Read more less

Toughen up your front end with the Traxxas HD Extreme Steering Blocks. Designed for maximum durability in demanding off-road conditions, these heavy-duty steering blocks are a perfect upgrade or replacement for a wide range of Traxxas 2WD platforms, including Rustler®, Bandit®, Slash®, Stampede®, Bigfoot® No. 1, and Drag Slash®. Compatible with both standard setups and the 2WD Extreme Heavy Duty Upgrade Kits (TRA9180, TRA9181, and TRA9182-series), these blocks are built to take a beating while maintaining precise steering performance. Features:• Heavy-duty design for increased strength and durability• Fits Traxxas 2WD models: Rustler®, Bandit®, Slash®, Stampede®, Bigfoot® No. 1, Drag Slash®• Works with stock and aluminum Traxxas components• Compatible with Extreme Heavy Duty Upgrade Kits (TRA9180–9182)• Available in multiple colors for custom builds Includes:• (1) Left HD Extreme Steering Block• (1) Right HD Extreme Steering Block• (2) 3x26mm Hinge Pins• (2) 3x15mm Screws• (2) Hex NutsPart Number: 9137 Strength where it matters—these HD steering blocks are built for serious off-road performance.

Read more less

  Traxxas Heavy Duty Front Driveshaft AssemblyPart #: 6851X Upgrade or replace with confidence using this Heavy Duty Front Driveshaft Assembly from Traxxas. Designed for the Stampede 4x4, this driveshaft is a direct-fit replacement that comes fully assembled and ready to install. Built for durability and performance, it’s compatible with both the left and right sides of the chassis. Features: Heavy-duty construction for increased durability Pre-assembled for quick, hassle-free installation Fits left or right front of the Stampede 4x4 Genuine Traxxas part for factory reliability Vehicle Compatibility: Traxxas Stampede 4x4 Includes: (1) Heavy Duty Front Driveshaft Assembly  

Read more less

  Traxxas Heavy Duty Rear Driveshaft AssemblyPart #: 6852X Tougher. Stronger. Built to Bash.The Traxxas 6852X Heavy Duty Rear Driveshaft Assembly is the perfect upgrade or replacement for your Stampede 4X4. Engineered for high-torque brushless power systems, this driveshaft is built to handle extreme terrain and aggressive driving. With factory-assembled convenience, this heavy-duty shaft delivers maximum durability and performance right out of the package—no extra tools or parts required. Features: Designed for high-strength and long-lasting performance Compatible with Traxxas Stampede 4X4 (rear, left or right) Pre-assembled and ready to install Handles powerful brushless setups with ease Includes: (1) Fully Assembled Rear Heavy Duty Driveshaft Beef up your drivetrain and get back to doing what your Stampede 4X4 was made for—conquering everything in its path.

Read more less

Traxxas Heavy Duty Steel CV Rear Driveshafts (2) Part #: 1951R Upgrade your drivetrain with these Heavy Duty Steel Constant Velocity (CV) Rear Driveshafts from Traxxas. Built for extreme performance, these shafts provide superior strength and durability, perfect for high-torque setups and aggressive off-road action. ✅ Features: Heavy-duty steel construction for max durability Nickel-plated finish for corrosion resistance and a premium look Black silicone boots offer protection and custom styling Sealed and lubricated outer U-joints for extended life Captured U-joint pins to prevent loss under heavy use 📦 Includes: (2) Steel CV Rear Driveshafts Pre-installed rubber boots and hardware 🔧 Boost your drivetrain’s strength and reliability with Traxxas steel CV shafts — built for serious bashers and racers alike!

Read more less

Traxxas Suspension Arms (Left & Right) – 3655Replacement Arms for Bigfoot®, 2WD Rustler®, and 2WD Stampede® Keep your suspension performing at its best with these genuine Traxxas replacement suspension arms. Designed as direct replacements for the Bigfoot®, Rustler® 2WD, and Stampede® 2WD, this set includes both the left and right arms for a quick and reliable fix. Features:• Direct replacement suspension arms• Fits Bigfoot®, Rustler® 2WD, and Stampede® 2WD• Durable molded construction built for off-road abuse• Includes both left and right arms Includes:• (1) Left Suspension Arm• (1) Right Suspension ArmPart Number: 3655 Get back on the track or trail with OEM strength and fit—built Traxxas tough.

Read more less

  Traxxas Jato/Slayer Heavy Duty Rod Ends (8) – Part #5525R💪 Built Stronger. Ready for More. Upgrade your rig with the Traxxas 5525R Heavy Duty Rod Ends. Designed specifically for the Jato and Slayer, these rod ends offer increased durability for high-impact conditions and can also be used as a stronger alternative to standard TRA5525 ends in a variety of Traxxas vehicles. ✅ Heavy-duty construction for added strength✅ Compatible with Jato, Slayer, and other models using TRA5525 ends✅ Direct fit with no modifications required✅ Ideal upgrade for high-stress suspension or steering components❌ Note: Pillow balls not included 📦 Includes: (8) Heavy Duty Rod Ends COMPATIBILITY: Traxxas Jato Traxxas Rustler Traxxas Slash Traxxas Stampede

Read more less

Traxxas Jato® 4X4 1/8 Brushless RTR 4WD Electric Racing Buggy (Black) w/ TQ™ 2.4GHz Radio 🏁Legendary Speed. Built Traxxas Tough. The Jato® 4X4 BL-2s is a race-bred 1/8 scale buggy engineered for speed, control, and durability. With a low-CG chassis, track-tuned suspension, and Extreme Heavy Duty drivetrain, the Jato blasts through terrain with precise handling and brutal brushless power. Powered by the BL-2s™ brushless system, it delivers up to 60% more speed than brushed models, while a clipless body system makes battery swaps quick and simple. 💥 Features: ⚡ BL-2s™ Brushless Power System – High-efficiency 3300kV motor + waterproof ESC 🧊 ESC with 3 Drive Modes – Sport, Race, and Training Mode™ for all skill levels 💪 Extreme Heavy Duty Upgrades – Maxx-Duty® driveshafts, reinforced shock towers & drivetrain 🔧 Modular Low-CG Chassis – Designed for sharp cornering and easy maintenance 🛞 Sledgehammer® Tires – High-grip tread on 3" black dished wheels 🧲 Clipless Body Mounting – Fast, tool-free access with high-downforce wing for stability 🛠️ GTR Oil-Filled Shocks – Plush, consistent suspension on any surface 🎮 TQ™ 2.4GHz Radio System – Proven long-range precision 📦 Includes: (1) Traxxas Jato® 4X4 1/8 Brushless RTR Buggy (Black) (1) BL-2s™ 3300kV Sensorless Brushless Motor (1) BL-2s™ Electronic Speed Control (ESC) (1) TQ™ 2.4GHz 2-Channel Transmitter Miscellaneous Maintenance Tools Product Manual 🔋 Needed to Complete: (1) 2S LiPo Battery w/ Traxxas iD® Connector (1) Compatible Charger (TRA2920 recommended) (4) AA Batteries for Transmitter 📐 Specs: Scale: 1/8 Drive: 4WD Length: 20.4 in (517 mm) Width: 12.0 in (305 mm) Height: 7.0 in (179 mm) Wheelbase: 12.6 in (320 mm) Weight: 83.2 oz (2358.6 g) Motor: 3300kV Brushless (Sensorless) ESC: BL-2s™ Waterproof Servo: High-Torque Wheels: 3.0 in (Front & Rear) Tires: Sledgehammer® (Front & Rear) Hex Size: 17mm Battery Tray: Compatible with 2S LiPo (7.4V) Hit the throttle and hang on — the Jato 4X4 is ready to launch.Precision handling. Extreme power. Pure Traxxas performance. 💨

Read more less