Keep your Maxx drivetrain strong with the Traxxas Differential Output Yoke Assembly. This pre-assembled unit includes the external-spline half shaft and fits either the front or rear differential. ✅ Pre-Assembled – Ready to install with external-spline half shaft included✅ Front or Rear Fitment – Versatile design works on either end of your Maxx✅ Genuine Traxxas Part – OEM quality and durability✅ Note: Does not fit Maxx models with narrow suspension Compatibility: Traxxas Maxx (wide suspension version only) Includes: (1) Pre-assembled Differential Output Yoke with half shaft Built tough for extreme action, the Traxxas 8949X Output Yoke Assembly keeps your Maxx running smooth and reliable.

Read more less

Boost your Traxxas vehicle’s performance with the Stinger 540 20-Turn Electric Motor. A mild modified motor, the Stinger delivers a solid balance of speed, torque, and runtime, making it a great upgrade or replacement option for your 1/10 Traxxas models. ✅ 20-Turn Single Design – Wound for balanced speed and torque✅ Durable & Reliable – Built to handle everyday bashing and racing✅ Great All-Around Choice – Strong acceleration with good top speed✅ Perfect Replacement – Direct fit for Traxxas models using 540-size brushed motors How It Works: 20 Turns (Single Wind): Wire is wound 20 times around the armature for balanced power output. Speed vs. Torque: Fewer turns = higher speed, more turns = more torque. The Stinger’s 20T design provides a middle ground. Setup Matters: Proper gearing and quality batteries are essential to unlock maximum performance. Specifications: Motor Size: 540 Turns: 20T (Single) Application: 1/10 Traxxas vehicles (direct replacement for brushed setups) The Traxxas Stinger 540 (20T) is a tried-and-true motor that gives you dependable performance whether you’re bashing, racing, or just running for fun.    

Read more less

Upgrade the drivetrain of your XRAY XB4 2024/2025 with the Exalt Hybrid-XSN Ceramic Bearing Kit. Featuring a precision-engineered hybrid design, these bearings pair Silicon Nitride ceramic balls with stainless steel inner/outer rings for smoother operation, higher speed, and greater impact resistance than traditional full steel or full ceramic bearings. Pre-lubricated with Exalt Oil Slick Hi-Speed PTFE Bearing Oil, this kit provides out-of-the-box performance that’s built for the demands of racing. 🔥 Key Features: Designed for the XRAY XB4 2024 & 2025 1/10 4WD Buggy Hybrid design: Silicon Nitride ceramic balls + stainless steel rings Faster and smoother than all-steel bearings More impact-resistant than full ceramic bearings Lightly lubricated with Exalt Oil Slick Hi-Speed PTFE Bearing Oil (EXA9314) Serviceable: clean with citrus cleaner or acetone, re-lube as needed Built for maximum performance in both spec and modified racing ✅ Compatibility: XRAY XB4 2024 XRAY XB4 2025 📦 Includes: (16) Hybrid-XSN Ceramic Bearings (complete kit for XB4 2024/2025) ⚠️ Tip:Check your bearings before each race day and re-oil as needed to ensure peak drivetrain efficiency and extended bearing life.  

Read more less

Upgrade your Mini-Z or micro-scale racer with the PN Racing V4 Anima High Speed Digital Servo. Built with titanium gears, a coreless motor, and an aluminum case, this servo is engineered for lightning-fast response and rock-solid durability in competitive racing. ✅ High Speed Response – 0.0645 sec/60° @ 4.8V 0.0495 sec/60° @ 6.0V ✅ Strong Torque Output – 1.21 kg-cm (25 oz-in) @ 4.8V 2.39 kg-cm (30 oz-in) @ 6.0V ✅ Premium Construction – Titanium gears, coreless motor, and aluminum case for strength and reliability✅ Lightweight & Compact – Only 11g, sized perfectly for 1/28 scale builds✅ Includes POM Servo Horn Set for easy installation Specifications: Voltage: 4.8–6.0V Speed: 0.0645–0.0495 sec/60° Torque: 1.21–2.39 kg-cm Size: 20 × 21 × 11.3mm (0.78 × 0.82 × 0.44 in) Spline: 25T Weight: 11g Wire: JST1.5, 80mm / 28AWG Servo Horn Screw: M2.5 (length varies by build) Compatibility: PN Racing PNR3.0 chassis Drift Art DA2.5 / DA3.0 chassis Built for speed, precision, and durability, the Anima V4 Titanium Gear Servo gives you the edge in every race.

Read more less

Optimize rear-end stability and durability with the RC10B6.2 Rear Hubs from Team Associated. Designed for high-performance racing, these molded composite hubs provide the perfect balance of strength, adjustability, and weight for 1/10 scale 2WD competition buggies. 🔥 Key Features: Molded composite construction for durability and weight savings Provides secure and precise fitment for rear axles and bearings Designed for high-performance rear suspension geometry Includes mounting locations for vertical ball stud height adjustments ✅ Compatibility: RC10B6.2 RC10B6.2D RC10B6.3 / B6.3D (backwards compatible) Also fits other B6-series vehicles with compatible rear hub geometry 📦 Includes: (1) Left Rear Hub (1) Right Rear Hub ⚠️ Note:Use with Team Associated’s tuning inserts and vertical ball stud hardware for full adjustability.

Read more less

Upgrade your RC10B6.3’s drivetrain with the Heavy Duty (HD) Slipper Spring and Adapters from Team Associated. Engineered for improved durability and consistent slipper performance, this set is ideal for racers pushing their vehicles to the limit on high-traction surfaces. 🔥 Key Features: Heavy duty slipper spring for increased pressure and durability Includes updated slipper adapters for optimized fit and function Designed for smoother and more consistent slipper operation Direct replacement for the stock B6.3 slipper components ✅ Compatibility: RC10B6.3 RC10B6.3D May also fit other RC10B6-series models with similar slipper configurations 📦 Includes: (1) HD Slipper Spring (2) Slipper Adapters ⚠️ Note:Ensure proper slipper assembly for optimal performance. Refer to your vehicle’s manual for installation instructions.

Read more less

Upgrade your RC10B74's steering performance with the 9-degree Caster Blocks from Team Associated. Designed for precision and durability, these caster blocks deliver improved cornering stability and increased on-power steering response. 🛠️ Key Features: 9° caster angle for improved handling characteristics Factory Team quality with tight manufacturing tolerances Durable composite construction Direct fit for RC10B74 front suspension 📦 Includes: (1) Pair of 9° Caster Blocks (left & right) ✅ Compatibility: Team Associated RC10B74 and variants (check manual for specific fitment) Ideal for racers looking to fine-tune front-end geometry to suit different track conditions. A must-have tuning option for competitive setups.

Read more less

Fine-tune your RC10B74.2’s rear suspension geometry with this Rear Gearbox Adjustable Height Insert Set. Whether you're dialing in anti-squat or adjusting rear drive angles, these inserts give you the flexibility to get the most out of your setup. 📌 Key Features: Precision-molded plastic insert set Allows for rear gearbox height adjustment Fine-tune rear suspension geometry and anti-squat Designed specifically for RC10B74.2 and RC10B74.2D platforms 📦 Includes: Multiple insert pairs for adjustable configurations Designed to work with standard rear gearbox components ✅ Compatibility: RC10B74.2 RC10B74.2D Ideal for racers looking to squeeze out extra performance on varying track conditions — essential for serious 1/10 4WD competition setups.

Read more less

Keep your drivetrain dialed in with the Factory Team Decoupled Slipper Thrust Bearing Rebuild Set for the RC10B74.2. Designed specifically for the decoupled slipper assembly, this kit includes everything needed to service the thrust bearing for smooth operation and consistent performance on the track. 📌 Key Features: Genuine Team Associated Factory Team part Restores slipper clutch smoothness and reliability Precision components for minimal friction Essential for regular maintenance of decoupled slipper setups 📦 Includes: Complete thrust bearing rebuild components (washers, balls, etc.) Enough to fully service one decoupled slipper thrust bearing assembly ✅ Compatibility: RC10B74.2 with Factory Team Decoupled Slipper System

Read more less

Team Associated RC10B74.2 FT Center Dogbone Blades (Part #92374) Keep your drivetrain running smooth and efficient with the Factory Team Center Dogbone Blades for the RC10B74.2. These precision-machined blades are engineered to reduce friction, minimize wear, and provide consistent performance under extreme racing conditions. A must-have for serious 1/10 4WD racers looking to maintain their competitive edge. 📌 Key Features: Genuine Factory Team upgrade Designed specifically for center dogbones Reduces friction and drivetrain wear Improves longevity and performance Lightweight and durable material 📦 Includes: (4) Center Dogbone Blades ✅ Compatibility: Team Associated RC10B74.2 RC10B74.2D May also fit other B74 variants with center dogbone setup

Read more less

The Team Associated Factory Team Steering Block Arms +2 are a precision upgrade for your RC10B74 series vehicle. With a 2mm longer length than stock, these arms enhance steering geometry for improved handling and tuning options—especially beneficial on high-bite surfaces where extra steering stability is critical. 📌 Key Features: +2mm longer for refined steering geometry Factory Team upgrade for precision fit and durability CNC-machined for consistent performance Ideal for tuning your RC10B74.2 to specific track conditions 📦 Includes: (1) Left Steering Block Arm (+2) (1) Right Steering Block Arm (+2) ✅ Compatibility: RC10B74 RC10B74.1 RC10B74.2

Read more less

Overview:Maintain precise steering response with the Team Associated RC10B84 Steering Links & Pivot Ball Sockets. Designed as genuine factory replacements, these parts restore proper geometry and eliminate unwanted slop when your originals show signs of wear. Perfect for racers who demand consistent handling and durability from their B84. Features: Complete set of steering links and pivot ball sockets Molded to factory specs for perfect fitment Durable construction withstands the demands of racing Direct replacement for worn or damaged parts Genuine Team Associated replacement part Compatibility: Team Associated RC10B84 1/10 4WD Buggy Includes: (2) Steering Links (4) Pivot Ball Sockets Part Number: 92523 ⚡ Pro Tip: Combine these with the RC10B84 turnbuckle set (92558) for a fully refreshed and precise steering assembly.

Read more less

Overview:The Arrma 550 14T Brushed Motor is a powerful and reliable replacement motor designed for Arrma 1/10 scale brushed vehicles. Built with durability in mind, this motor delivers consistent torque and smooth acceleration, making it ideal for both beginners and backyard bashers. Its rugged construction ensures long-lasting performance, even under demanding conditions. Features: 550-size 14-turn brushed motor Provides reliable torque and smooth throttle response Durable design built for bashing and off-road fun Black can finish with Arrma logo for a clean look Genuine Arrma replacement part Compatibility: Direct replacement for select Arrma 1/10 4x4 brushed models, including: Granite 4x4 MEGA Senton 4x4 MEGA Big Rock 4x4 MEGA Typhon 4x4 MEGA May also be compatible with other vehicles using a 550-size brushed motor (check manual) Includes: (1) Arrma 550 14T Brushed Motor (Black) Part Number: ARA390307 ⚡ Pro Tip: Pair this motor with a fresh pinion gear and properly geared ESC setup to maximize runtime and keep temps under control.

Read more less

Overview:Upgrade your drivetrain with the Traxxas X-Maxx Constant Velocity (CV) Steel Driveshaft. Built for the 8S-spec heavy-duty drivetrain, this CV driveshaft delivers maximum strength, smoother power delivery, and reduced wear under extreme torque loads. It’s the perfect solution for high-power setups and hard bashing where reliability is critical. For owners of the older 6S X-Maxx, this driveshaft can also be used as an upgrade with additional required parts. Features: Heavy-duty steel CV driveshaft for extreme durability Designed for 8S-spec X-Maxx drivetrain Provides smoother, more efficient power transfer Reduces driveline flex and wear Genuine Traxxas factory upgrade Compatibility: X-Maxx 8S – Direct replacement X-Maxx 6S – Upgrade (requires additional parts: 7751X, 7754X, 7768 or 7768R) Includes: (1) Constant Velocity Steel Driveshaft Part Number: 7750X ⚡ Pro Tip: When upgrading a 6S X-Maxx to the 8S-spec drivetrain, grab all the required parts in one go (7751X, 7754X, and 7768 or 7768R) to ensure a smooth installation and bulletproof performance.

Read more less

Overview:The Traxxas Transmission Yokes are genuine replacement parts designed to keep your drivetrain reliable and efficient. Built from durable composite material, these yokes provide a precise fit with the driveshafts, ensuring smooth power transfer and long-lasting performance under high loads. Features: Set of 2 transmission yokes Molded from strong composite material Provides smooth, reliable drivetrain operation Direct factory replacement for worn or damaged yokes Genuine Traxxas part for guaranteed fit and performance Compatibility: Traxxas E-Revo VXL 2.0 Traxxas Revo 3.3 Traxxas Summit Other models using the same yoke system (check manual for fitment) Includes: (2) Transmission Yokes Part Number: 8658

Read more less

Overview:Keep your drivetrain running smooth with the Traxxas E-Revo VXL 2.0 Center Half Shafts. These heavy-duty composite shafts transfer power from the transmission to the differentials with strength and efficiency. Designed as genuine factory replacements, they’re built to handle the extreme power and performance of the E-Revo VXL 2.0. Features: Set of 2 center half shafts Made from durable composite material for strength and flexibility Transfers power efficiently while resisting twisting under load Genuine Traxxas replacement part for reliable performance Compatibility: Traxxas E-Revo VXL 2.0 (center driveshafts) Includes: (2) Center Half Shafts Part Number: 8655

Read more less

  Overview:The Traxxas XX-Long Hardened Steel Shock Shafts deliver maximum strength and durability for extreme RC action. Constructed from premium hardened steel, these shafts resist bending and wear far better than stock, ensuring consistent performance and smooth suspension movement—even under the harshest bashing or racing conditions. Features: Set of 2 XX-Long shock shafts Made from hardened steel for extreme strength Precision-ground for smooth shock action and long life Tougher and more durable than chrome-plated shafts Genuine Traxxas factory replacement part Compatibility: Traxxas Ultra Shocks and Big Bore Shocks requiring XX-Long shafts Commonly used in larger Traxxas vehicles, including: Stampede Rustler Bandit Slash (models using XX-Long shocks) Check your model’s manual for exact fitment Includes: (2) XX-Long Hardened Steel Shock Shafts Part Number: 2656T

Read more less

Overview:The Traxxas Titan 550 Marine Motor is built for high-torque, water-ready performance. Featuring 24 turns of pure copper windings, this 550-size brushed motor delivers massive torque and reliable power for RC boats. Rated for up to 14 volts, it’s designed for long runs on the water without overheating. Equipped with an integrated cooling fan, the Titan marine motor pulls cool air through the motor case to keep temperatures low and performance consistent. This motor includes capacitors for noise suppression but requires soldering, as it does not come with wires or connectors pre-installed. Features: 550-size, 24-turn brushed motor Rated for operation up to 14V Integrated cooling fan keeps temps down during long runs Provides massive torque and smooth, efficient power delivery Includes capacitors (no wires or connectors – soldering required) Genuine Traxxas replacement part Compatibility: Fits select Traxxas marine models (check manual for exact fitment) Common in Villain EX, Blast, and other Traxxas boats Includes: (1) Titan 550 Marine Motor Part Number: 1585

Read more less

Upgrade your shocks with the XRAY Aluminum Shock Cap Nuts. Machined from premium Swiss 7075 T6 aluminum, these cap nuts include a precision vent hole that allows trapped air to escape during assembly for smoother and more consistent shock performance. Features: CNC-machined from high-quality Swiss 7075 T6 aluminum Integrated vent hole for bubble-free shock bleeding Designed for Big Bore shocks Hard-anodized finish for long-lasting durability Lightweight design without sacrificing strength Includes: (2) Aluminum Shock Cap Nuts with Vent Hole Compatibility: XRAY XB2 (2WD Buggy) XRAY XT2 (2WD Stadium Truck) XRAY XB4 (4WD Buggy) Other XRAY models equipped with Big Bore shocks (check manual)

Read more less

Secure your batteries with confidence using the XRAY Composite LiPo Battery Holder – Long. Precision-molded from premium XRAY composite, these holders are lightweight yet durable, ensuring a snug fit and reliable hold during even the most aggressive racing. The long version is designed for extended-size LiPo packs, offering proper alignment and security in your chassis layout. Features: Includes 2 front & 2 rear holders Long design for extended-size LiPo battery packs Molded from high-quality XRAY composite material Keeps batteries secure under high loads and impacts Lightweight and easy to install Compatibility: XRAY XB2 – 1/10 2WD Buggy (all versions, long battery layout) XRAY XT2 – 1/10 2WD Stadium Truck (all versions, long battery layout) XRAY XB4 – 1/10 4WD Buggy (check manual for pack fitment) Part Number: 326176-L      

Read more less

Fine-tune your XB2’s rear-end handling with the XRAY Short Rear Anti-Roll Bar series. Designed for precision adjustment, these sway bars control body roll and improve cornering stability, giving you the flexibility to adapt your buggy to any track condition. A softer bar provides more rear grip and smoother steering response, while a stiffer bar sharpens steering and reduces rear traction. Choose the perfect thickness to match your setup! Available Sizes: 1.0mm (323490) – Softest 1.1mm (323491) 1.2mm (323492) 1.3mm (323493) 1.4mm (323494) 1.6mm (323496) – Hardest Effects of Rear Roll Bar Changes: Softer Bar: Increases chassis roll Increases rear grip in corners Decreases on-power steering Car responds more slowly to direction changes Stiffer Bar: Decreases chassis roll Decreases rear grip in corners Increases on-power steering Car responds quicker to direction changes Features: High-quality spring steel construction Short design for precise handling response Essential tuning part for competitive setups Compatibility: XRAY XB2 (All Versions) Includes: (1) Short Rear Anti-Roll Bar (size selected)    

Read more less

Upgrade your XB2 with the XRAY Carbon Rear Shock Tower (4-Dots) for precision handling and durability. Made from high-quality carbon fiber, this shock tower provides the perfect balance of strength and lightweight performance. The 4-dot design gives you multiple shock mounting options, making it easy to fine-tune your suspension for any track condition. Features: Premium carbon fiber construction – lightweight yet rigid 4-dot design for expanded shock mounting adjustability Improves rear suspension tuning and consistency Factory XRAY precision fit and finish Direct replacement for stock rear shock tower Compatibility: XRAY XB2 (all versions requiring 4-dot rear tower) Includes: (1) Carbon Rear Shock Tower – 4-Dots

Read more less

Fine-tune your steering geometry with XRAY’s precision-machined Graphite Steering Block Extension Plates. Available in 1-dot, 2-dot, and 3-dot options, these lightweight graphite plates let you adjust steering response and handling characteristics to match your track and driving style. Features: Made from high-quality graphite for strength and precision Adjusts steering geometry for optimal handling Lightweight, durable construction Direct fit for XB2 & XT2 platforms Includes 2 extension plates per set Dot Options (choose your setup): 1-Dot (322294): Minimal extension – smooth, stable steering 2-Dot (322295): Balanced setting – great all-around response 3-Dot (322296): Maximum extension – aggressive steering feel Compatibility: XRAY XB2 (all versions) XRAY XT2 (all versions) Includes: (2) Graphite Steering Block Extension Plates (select 1-dot, 2-dot, or 3-dot version)

Read more less

Upgrade your steering setup with XRAY’s Graphite Composite C-Hubs for the XB2. Available in Right (322210-G) or Left (322220-G), these hubs are molded from high-strength graphite composite material for improved stiffness, precision, and durability over standard composite parts. Features: Strong graphite composite construction Improves steering precision & consistency Direct replacement for stock XB2 C-hubs Available in Right or Left version Compatibility: XRAY XB2 (all versions) Other XRAY platforms using XB2 C-hubs Includes (choose option): (1) Right C-Hub – 322210-G (1) Left C-Hub – 322220-G

Read more less

Unleash extreme 4S LiPo power with the Traxxas Velineon VXL-4S Brushless Electronic Speed Control. Built to deliver blistering speed and precision throttle response, this waterproof ESC is the ultimate upgrade for your high-performance Traxxas vehicles. With advanced thermal management and robust reliability, it’s engineered for intense bashing, racing, and everything in between. Features: Designed for 4S LiPo battery power Waterproof construction for all-weather driving Advanced current handling and thermal protection Easy setup and programming with Traxxas EZ-Set® Delivers smooth throttle response and maximum efficiency Includes:(1) Traxxas Velineon VXL-4S Brushless ESC Compatibility: Fits select Traxxas 1/10 scale and 1/8 scale models (check manual for fitment).  

Read more less

Keep your Traxxas vehicles running strong with this genuine set of button-head machine screws. At 3x14mm, these precision-engineered screws are perfect replacements for stock hardware and ensure a secure fit on your build. Whether you’re repairing, upgrading, or customizing, Traxxas hardware delivers the durability and reliability you need. Features: Genuine Traxxas replacement part Button-head machine screws, 3x14mm Pack of 6 screws included High-quality steel construction for long-lasting use Includes:(6) 3x14mm Button-Head Machine Screws Compatibility:Used across a wide range of Traxxas vehicles. Check your model’s manual to confirm exact fit.    

Read more less

The XRAY Differential Gasket Set is a must-have replacement pack for maintaining smooth, leak-free differential performance. Made from precision-cut, high-quality material, these gaskets create a perfect seal to keep diff oil where it belongs and extend the life of your drivetrain. Features: Precision fit to ensure consistent diff sealing High-quality material resists wear and compression Maintains smooth, reliable differential action Essential for regular maintenance and rebuilds Includes:(4) Differential Gaskets Compatibility: Fits XRAY differentials across multiple platforms (commonly used in XB2, XB4, XT4, and related models)

Read more less

Upgrade your XRAY XB4 with the 2025 Carbon Fiber Rear Shock Tower designed for the HS (High Strength) bulkhead. Featuring a 3-dot configuration, this tower is precision CNC-machined from premium carbon fiber to deliver the perfect balance of strength and low weight. Optimized geometry improves suspension performance, durability, and consistency, giving you an edge on today’s demanding tracks. Features: Genuine XRAY factory part for the XB4 2025 CNC-machined from premium carbon fiber 3-dot shock position design for precise tuning Lightweight yet highly durable construction Direct replacement for the stock shock tower Designed for use with HS bulkhead Includes:(1) Carbon Fiber Rear Shock Tower (HS Bulkhead) – 3 Dots Compatibility: XRAY XB4 2025 (with HS Bulkhead) May fit earlier XB4 models when converted with HS bulkhead system    

Read more less

The XRAY Open Eccentric Bushing Set is a precision tuning option that allows racers to adjust suspension geometry with ease. The open design makes it simple to swap and rotate bushings without disassembling major components, saving valuable time during trackside adjustments. About the BushingsCrafted from premium composite material, these bushings provide reliable strength and long-lasting performance. By rotating the eccentric inserts, you can fine-tune roll centers and suspension angles for optimized handling on any surface. Features: Open design for quick installation and adjustments Strong composite construction for durability under racing stress Allows fine suspension and roll center tuning Lightweight and consistent fit Includes:(2) Open Eccentric Bushings Compatibility: XRAY XB4 XRAY XT4 XRAY XB2(fits models using eccentric bushings for suspension/diff height adjustments – confirm fit with your manual)

Read more less

The XRAY Graphite Composite Steering Block is a high-strength upgrade designed to improve steering precision and durability on your XB4 buggy. Constructed from graphite-reinforced composite, it reduces flex while keeping weight low — giving you sharper, more predictable control in every corner. About the Steering BlockWith an optimized geometry for smoother Ackermann response and consistent steering feel, this steering block is ideal for today’s high-grip racing conditions. Its tough composite material ensures reliability through hard impacts and long race days. Features: Graphite-reinforced composite construction for maximum rigidity Optimized geometry for precise steering response Lightweight and durable race-proven design Direct replacement for the stock steering block Includes:(1) Graphite Composite Steering Block Compatibility: XRAY XB4 1/10 4WD Buggy (2022+ models, check manual for fit)

Read more less

The XRAY XB2 Differential Gasket Set includes four precision-cut gaskets designed for use in the XB2 gear differential. These gaskets provide a tight, consistent seal to prevent oil leakage and ensure smooth, reliable diff performance. Perfect for rebuilds or routine maintenance, they help extend the life of your differential while maintaining peak performance. Features: Precision-cut gaskets for perfect sealing Prevents oil leaks and maintains smooth diff action Durable material for long-lasting reliability Essential for rebuilds and maintenance Designed for XRAY XB2 vehicles Includes:(4) Differential Gaskets    

Read more less

The XRAY XB2 Composite Idler Gear is the direct replacement 25-tooth idler gear for the XB2 1/10 scale buggy. Precision molded for durability and smooth drivetrain operation, this gear keeps your XB2 running strong with consistent performance. Features: Genuine XRAY replacement part Composite construction for strength and low wear Smooth, efficient power transfer 25-tooth idler gear Compatibility: XRAY XB2 1/10 Buggy Includes: (1) 25T Composite Idler Gear  

Read more less

🏁 Factory Team Efficiency UpgradeSwap in the Factory Team molded ring & pinion to reduce rotating mass and keep your B84’s diff running smooth and quiet. Precision-molded tooth profiles deliver consistent mesh and improved drivetrain efficiency. ⚙️ Features: ✅ Molded construction for lighter rotational mass and quieter operation ✅ Factory Team quality for precise tooth geometry and smooth mesh ✅ Direct fit for the RC10B84 differential ✅ Ideal spare or performance swap for efficiency-focused setups 📦 Includes: (1) Molded Ring Gear (1) Molded Pinion Gear 💡 Pro Tip: Great for stock-class efficiency. If you run high-power/mod setups, keep an eye on wear and diff shim settings to maintain a perfect mesh.  

Read more less

🔧 Restore Rear-End Structure – The RC10B84 Rear Shock Tower is a direct replacement part designed to bring your buggy back to factory specifications. It ensures consistent suspension geometry and handling after wear, damage, or heavy use. ⚙️ Features:✅ Direct replacement for the stock RC10B84 rear shock tower✅ Maintains suspension geometry and stable handling✅ Durable composite construction for long-lasting performance✅ Designed for easy fit and reliability 📦 Includes: (1) RC10B84 Rear Shock Tower 🔧 Compatibility: Team Associated RC10B84 💡 Pro Tip: Consider keeping an extra shock tower on hand — they’re a common part to break in hard landings, and a quick swap can save your race day.  

Read more less

🔧 Precision Steering Control – Keep your B84’s front end dialed with the Factory Team Front Hubs. Designed for durability and tuning flexibility, these hubs ensure consistent steering response and smooth suspension geometry under race conditions. ⚙️ Features:✅ Precision-molded for a perfect fit on the B84 platform✅ Multiple camber link mounting holes for fine-tuned steering feel✅ Durable construction for long-lasting performance✅ Factory Team quality parts for competitive-level racing 📦 Includes: (1) Left Front Hub (1) Right Front Hub 🔧 Compatibility: Team Associated RC10B84 💡 Pro Tip: Use the inner camber link holes for more aggressive steering on tight tracks, and the outer holes for smoother, more stable cornering.

Read more less

⚡ Keep the Power Flowing – Replace or upgrade your drivetrain with the Factory Team 102mm Center CVA Bone for the RC10B84. Precision-machined for smooth rotation and durability, this part ensures consistent power transfer through your buggy’s center driveline. ⚙️ Features:✅ 102mm length – designed specifically for the RC10B84✅ Precision-machined for smooth, efficient drivetrain performance✅ Strong, durable construction for long-lasting use✅ Factory Team quality for competitive racing 📦 Includes: (1) 102mm Center CVA Bone 🔧 Compatibility: Team Associated RC10B84 💡 Pro Tip: Always check for wear at the pins and outdrives—swapping CVA bones before they fail helps protect more expensive drivetrain parts.    

Read more less