Team Associated 12mm Big Bore V2 Machined Shock Spacers – Part 91494Precision Fit. Smooth Travel. Race-Ready Performance. The Team Associated 12mm Big Bore V2 Machined Shock Spacers (91494) are direct replacements for the RC10 B6 and B6D buggies. These machined components ensure precise shock shaft alignment and optimal sealing, helping your suspension perform consistently under race conditions. ✅ Fits RC10 B6, B6D, and other 12mm Big Bore V2 shocks✅ Machined for accuracy and long-lasting durability✅ Includes shock shaft guides and seal cartridge spacers✅ Supports four full shocks✅ Essential for maintaining smooth and consistent shock performance 📦 Includes: Complete Set of Shock Shaft Guides Seal Cartridge Spacers (for 4 shocks) Part #: 91494 💡 Pro Tip: Replacing shock spacers and guides during a rebuild helps eliminate leaks and restores full suspension responsiveness.

Read more less

Team Associated RC10B7 Gear Differential Set – Reliable Power Transfer for the Track! ⚙️ Keep your buggy’s drivetrain running smooth and efficient with the Team Associated RC10B7 Gear Differential Set!Designed as a direct replacement for the RC10B7 and RC10B7D, this factory gear diff delivers durability, consistent performance, and easy maintenance — essential for serious racers. ✨ Key Features: ⚙️ Complete Factory Replacement Gear Differential – Designed specifically for peak performance with the RC10B7 and B7D 🛠️ Durable Construction – Built to withstand the demands of 1/10 off-road racing 🏁 Smooth and Reliable Power Delivery – Maintains consistent handling and traction under race conditions 🔧 Easy to Service – Designed for fast rebuilding and tuning between heats 📦 Includes: ✔ (1) Complete RC10B7 Gear Differential Set 📦 Compatibility: ✅ Team Associated RC10B7 ✅ Team Associated RC10B7D 📌 Note: 🔹 Differential fluid is not included and must be purchased separately.🔹 Check your manual for recommended fluid weight based on track conditions. 🏁 Maintain your competitive edge with a fresh RC10B7 Gear Differential Set! 🔥 Upgrade today and ensure maximum performance and reliability from your Team Associated buggy! 🔥

Read more less

Keep your drivetrain smooth and consistent with the ARRMA Grom Oil-Filled Differential. This pre-assembled unit is designed for Grom platforms and comes filled with 3000cSt diff oil, providing balanced traction and predictable handling right out of the package. Built with a 0.8 Mod 30T gear, this differential delivers reliable power transfer while helping maintain control during acceleration and cornering. The oil-filled design allows for smoother operation and improved durability compared to dry diffs, making it a great replacement for worn or damaged units. 🔧 Features:• Pre-assembled oil-filled differential for easy installation• 3000cSt fluid provides balanced traction and control• 0.8 Mod 30T gear for reliable drivetrain performance• Smooth and consistent power delivery• Ideal replacement for worn or damaged differentials 📦 Includes:• (1) Assembled Oil-Filled Differential ⚙️ Specifications:• Gear Pitch: 0.8 Mod• Tooth Count: 30T• Fluid: 3000cSt ✅ Compatibility:• ARRMA Gorgon Grom• ARRMA Quake Grom Keep your Grom running smooth and consistent with the ARRMA oil-filled differential, delivering dependable performance and easy installation.  

Read more less

Overview:Keep your shocks and O-rings performing their best with Team Associated Factory Team Green Slime. This silicone-based grease conditions and protects shock O-rings, preventing swelling and tearing while reducing friction. The result is smoother shock action, longer O-ring life, and more consistent suspension performance. Features: Specially formulated silicone grease for shock O-rings and seals Prevents O-ring swelling, tearing, and leaking Reduces friction for smoother, more consistent shock performance Extends the life of seals and improves durability Easy-to-apply formula in a convenient container Trusted Factory Team product for racers and hobbyists alike Compatibility: Works with all RC shock absorbers using silicone O-rings Suitable for Team Associated vehicles and other brands Includes: (1) Container of Factory Team Green Slime Part Number: 1105 ⚡ Pro Tip: Apply a small amount of Green Slime to O-rings and seals whenever rebuilding your shocks—it’ll save you from leaks and keep your suspension feeling silky smooth longer.

Read more less

Traxxas Suspension Screw Pin Set, Steel (VXL) – Part #3640🔩 Secure the Suspension. Drive with Confidence. Keep your suspension tight and true with this steel screw pin set from Traxxas. Designed for VXL vehicles, these pins are used at the pivot points of suspension arms, providing reliable articulation and strength where it matters most. ✅ Precision-machined steel for durability✅ Factory fit for Traxxas VXL platforms✅ Essential for suspension rebuilds and maintenance 📦 Includes: (1) Suspension Screw Pin Set 💡 Pro Tip: Upgrading to steel screw pins is a simple way to increase long-term durability and reduce play in your suspension system.

Read more less

  Replace a worn or failed motor with the Dynamite SCX24 Motor w/ Pinion, designed as a direct replacement for the Axial 1/24 Deadbolt Mini Crawler. This motor comes pre-installed with the pinion gear for quick, hassle-free installation. Features: Direct replacement motor for Axial SCX24 Deadbolt Pinion gear pre-installed Reliable performance for crawling and trail use Easy drop-in installation Includes: (1) Motor with pinion installed (2) Mounting screws Compatibility: Axial SCX24 Deadbolt Part Number: DYNS1217 Perfect for restoring stock performance or keeping a spare motor on hand for your SCX24 crawler.

Read more less

  Keep your lap timing setup clean and reliable with the EASYLAP Transponder Connect Cable, designed specifically for Kyosho Mini-Z Sport RWD chassis. This plug-and-play lead connects your EASYLAP transponder directly to the car’s board for stable timing performance without modification. ⚙️ Features: Designed for Kyosho Mini-Z Sport RWD models Direct plug-in connection — no soldering required Provides reliable power and data link to EASYLAP transponder Lightweight and compact for clean installation Ensures accurate lap counting and timing during races 📏 Specifications: Part Number: ET009-S Compatibility: Kyosho Mini-Z Sport RWD Cable Type: Transponder connection lead Use: Connects EASYLAP transponder to Mini-Z Sport receiver board 📦 Includes: (1) EASYLAP Transponder Connect Cable for Mini-Z Sport RWD 💡 Pro Tip:Pair with your EASYLAP timing transponder for seamless race lap detection on Mini-Z Sport RWD cars — a must-have for serious racers running club timing systems.

Read more less

Overview:Add precision, style, and functionality to your wiring setup with the 1UP Racing 5mm Heatsink Bullet Plug Grips. These premium bullet connectors feature anodized aluminum grips that make plugging and unplugging battery leads effortless while improving cooling and providing a secure, professional finish. About the Heatsink Bullet Plug GripsThe 1UP Racing Heatsink Bullet Plug Grips are designed to elevate both performance and convenience. The aluminum grips act as miniature heatsinks, dissipating heat during high-current use while offering a secure, non-slip surface for easy handling. Perfect for racers and builders who want a clean, functional wiring setup that looks as good as it performs. Features: Machined aluminum heatsink grips help dissipate heat and add visual appeal 5mm bullet connectors provide solid, low-resistance electrical contact Easy to plug and unplug — even in tight battery trays Anodized in black and red for instant polarity identification Includes 3mm set screws for reliable wire retention Perfect upgrade for race builds and high-performance applications Includes: (2) 5mm bullet connectors (2) Heatsink plug grips (Black/Red) (2) 3mm set screws

Read more less

Keep your Mini-Z running strong with PN Racing’s High Power 750mAh Ni-MH AAA batteries. Built for racing, these cells deliver high voltage output over time, giving you the consistent performance needed for competitive runs. ✅ High Voltage Output – Maintains strong power throughout the run✅ Optimized Charging – Recommend charge rate: 0.7–1.0A for the best balance of power and runtime✅ Race Ready – Trusted by Mini-Z racers worldwide✅ Convenient Pack – Includes 4 matched AAA rechargeable batteries Specifications: Capacity: 750mAh Size: AAA Quantity: 4pcs Reliable, rechargeable, and race-proven — the PN Racing HP750 Ni-MH batteries are the perfect power solution for your Mini-Z.  

Read more less

  The ProTek RC Aluminum Clamping Servo Horn is a precision upgrade for Team Associated B6-series vehicles, delivering increased rigidity, accuracy, and durability over the stock plastic horn. Machined from a solid block of aluminum alloy and finished in black anodizing, this servo horn is built to handle the demands of modern high-performance racing. Designed as a direct replacement for the Team Associated ASC91728 servo horn, this updated version features a 2mm taller ball stud standoff, improving steering geometry and consistency. Weighing just 2 grams, it maintains ultra-low rotating mass while adding the security of a clamping design, helping prevent slippage even if the retaining screw loosens during a run. Ideal for competitive racers looking for precise steering response and long-term reliability, this ProTek servo horn offers the perfect balance of strength, weight, and performance. Features CNC-machined aluminum construction Clamping design for secure fitment 2mm taller ball stud standoff vs previous ProTek version Direct replacement for Team Associated ASC91728 Ultra-lightweight design (only 2g) Black anodized finish Specifications Spline: 25T (Futaba / Savox / ProTek compatible) Material: Aluminum Weight: 2 grams Compatibility Team Associated B6 Series Off-Road Vehicles B6 B6.1 / B6.2 / B6.3 / B6.4 B6D variants Notes Due to manufacturer tolerances, fitment may be tight with some servo brands. Test-fit before final installation.  

Read more less

Traxxas 12mm Hex Stub Axle Pin & Collar Set Part #: 1654 | Replacement Wheel Hub Set The Traxxas 1654 Stub Axle Pin & Collar Set is a direct replacement for worn or lost hex hubs and axle pins on a wide range of Traxxas vehicles. This kit includes two 12mm hex wheel hubs and four axle pins, ensuring a secure fit for your wheels and reliable power transfer to the ground. 📦 Includes: (2) 12mm Hex Wheel Hubs (4) Stub Axle Pins ✅ Compatibility: Fits most Traxxas 1/10 scale vehicles with 12mm hexes Commonly used in Slash, Rustler, Stampede, and others Always refer to your model’s manual to confirm compatibility.

Read more less

Oil, shock (70 wt, 900 cSt, 60cc) (silicone)

Read more less

Oil, shock (80 wt, 1,000 cSt, 60cc) (silicone)

Read more less

Oil, shock (20 wt, 200 cSt, 60cc) (silicone)

Read more less

Lightweight. Grippy. Colorful. Affordable. Upgrade your wheels without draining your wallet! BOOF RC M4 Flange Lock Nuts deliver rock-solid wheel security with a lightweight, race-ready design — perfect for high-grip tracks, brutal bashing sessions, and everything in between. Precision machined from high-quality aluminum and finished in bold anodized colors, these nuts keep your wheels locked down tight while adding a clean, custom look to your ride. Engineered for strong bite and consistent performance, so you stay focused on driving — not chasing wheels across the track. Key Features: ✅ Lightweight Aluminum Construction – Reduce rotating mass, increase performance.✅ Serrated Flange Design – Bites into the wheel for improved grip and security.✅ Low-Profile, Race-Ready Shape – Clean look that stays clear of obstacles.✅ 7mm Hex & M4 Thread – Fits most 1/10 scale vehicles (buggy, truck, touring, drift, etc.).✅ Vibrant Anodized Colors – Customize your setup with bold, high-contrast hardware.✅ Engineered for Everyday Abuse – Strong bite without stripping or backing off. Available Colors: 🟥 Red⬛ Black🩶 Titanium🟦 Royal Blue🩵 Light Blue 🟩 Green🟪 Purple⭐ Gold🤍 Silver (Availability may vary) Includes: (4) BOOF RC Aluminum M4 Flange Lock Nuts Perfect For: 1/10 Off-Road Racing Drift builds Street bashers Scale and comp crawlers Touring cars Track cars Whether you're racing, drifting, or crawling — these nuts keep your wheels firmly planted and looking sharp. BOOF RC: Premium Parts. Not Premium Prices. We don’t pretend our hardware is magic — just solid, race-worthy gear at a price that makes sense.Spend less on nuts, more on tires and track time. 🏁 🔥 Lock it down. Stand out. Go race. Grab a set of BOOF M4 Lock Nuts today and give your ride some BOOF-grade hardware swagger!

Read more less

Team Associated 13mm Rear Shock Spring. These replacement springs are intended for the Team Associated B6.4, however, they will also work with the Team Associated B6.4D as a tuning option. Package includes two springs. Effects of Shock Spring Changes  Shock Spring  Characteristic  Softer Increased Chassis Roll Increased Traction Better in Bumpy Conditions More Likely to Bottom Out  Stiffer Decreased Chassis Roll Decreased Traction Increased Responsiveness COMPATIBILITY: Team Associated RC10B6.4Team Associated RC10B6.4D

Read more less

Team Associated 13mm Front Shock Spring. These optional springs are intended for the Team Associated B6.4D and the B6.4. Package includes two springs. Effects of Shock Spring Changes  Shock Spring  Characteristic  Softer Increased Chassis Roll Increased Traction Better in Bumpy Conditions More Likely to Bottom Out  Stiffer Decreased Chassis Roll Decreased Traction Increased Responsiveness COMPATIBILITY: Team Associated RC10 B74.2Team Associated RC10 B74.2DTeam Associated RC10B6.4Team Associated RC10B6.4D

Read more less

Boof RC Body Clip Set – 180 Pieces Secure Every Shell. Built for All Scales. Tired of losing body clips? The Boof RC Body Clip Set is your all-in-one solution—180 pieces of high-quality R-clips to keep your RC bodies secure and race-ready. Whether you're bashing a 1/8 scale monster or tuning a 1/12 on-road rocket, this set has you covered. ✅ Includes 180 total clips in multiple sizes✅ Perfect for 1/8, 1/10, and 1/12 scale RC cars✅ Assorted sizes and finishes for universal compatibility✅ Strong tension design keeps your shell locked in✅ Great for racers, bashers, and builders alike 📦 Includes:Assorted R-clips in multiple lengths and thicknesses—ideal for every RC garage. 🧠 Pro Tip: Keep a few extras in your pit bag—these are always the first to disappear when you're having too much fun.  

Read more less

  Traxxas 83T Spur Gear – 48 Pitch – Part 4683Dial In the Perfect Gear Ratio. Built for Smooth Torque Control. The Traxxas 83-Tooth Spur Gear (Part 4683) is a high-precision replacement gear designed for models equipped with a Torque-Control slipper clutch. With fine 48-pitch teeth, it's perfect for smooth throttle response and gear ratio tuning in 1/10 scale vehicles. ✅ Tooth Count: 83T – ideal for high-acceleration gearing setups✅ Pitch: 48P – fine-tooth mesh for smooth and quiet operation✅ Designed for Torque-Control slipper clutch systems✅ Durable molded construction – reliable under brushless power✅ Fits a wide range of Traxxas 1/10 scale models 📦 Includes: (1) 83-Tooth 48P Spur Gear Part #: 4683 💡 Pro Tip: Pair with different 48P pinion sizes to fine-tune your speed vs. torque for your track or terrain.  

Read more less

Dominate high-grip tracks with confidence using the HotRace Mini-Pin Slim LP 2WD Front Tires. Designed specifically for modern carpet and astro racing, these tires provide razor-sharp steering response and excellent stability through high-speed corners. The slim, ultra-low-profile carcass keeps the tire planted while reducing roll and improving steering precision. A tapered mini-pin tread pattern delivers smooth yet aggressive front-end grip, allowing the buggy to rotate naturally while maintaining control through technical sections. The non-directional tread layout also makes mounting and setup quick and simple. Available in Soft and Soft/Medium compounds, these tires allow racers to fine-tune front-end traction for changing track grip levels. 🔧 Features:• Slim low-profile carcass designed for high-grip carpet racing• Mini-pin tread pattern delivers smooth and responsive steering• Non-directional design for easy mounting and setup• Stable front-end grip with excellent steering precision• Excellent performance on carpet and astro surfaces• Available in multiple compounds for tuning performance 📦 Includes:• (2) HotRace Mini-Pin Slim LP 2WD Front Carpet Tires ⚙️ Specifications:• Application: 1/10 2WD Buggy• Position: Front• Wheel Size: 2.2"• Surface: Carpet / Astro When precise steering and consistent front-end grip matter most, the HotRace Mini-Pin Slim LP front tires deliver the control and confidence needed for competitive carpet racing. 003-0311 003-0312  

Read more less

  Team Associated 13mm Shock Caps. Package includes four replacement shock caps and hardware

Read more less

Traxxas Suspension Arms (Left & Right) – 3655Replacement Arms for Bigfoot®, 2WD Rustler®, and 2WD Stampede® Keep your suspension performing at its best with these genuine Traxxas replacement suspension arms. Designed as direct replacements for the Bigfoot®, Rustler® 2WD, and Stampede® 2WD, this set includes both the left and right arms for a quick and reliable fix. Features:• Direct replacement suspension arms• Fits Bigfoot®, Rustler® 2WD, and Stampede® 2WD• Durable molded construction built for off-road abuse• Includes both left and right arms Includes:• (1) Left Suspension Arm• (1) Right Suspension ArmPart Number: 3655 Get back on the track or trail with OEM strength and fit—built Traxxas tough.

Read more less

Team Associated RC10T6.2 Factory Team Carbon Front "Gullwing" Arms [71139] 💪 Stronger. Lighter. Faster. Take your RC10T6.2 to the next level with Factory Team Carbon Front "Gullwing" Arms. Engineered with lightweight carbon fiber composites, these arms deliver extreme rigidity and improved handling on high-traction tracks—giving you the edge when it counts. 🔥 Features:✅ Approx. 12% weight savings over “hard” material✅ Ultra-rigid for more predictable handling in high-traction conditions✅ Significantly stronger than standard options✅ Designed for gullwing-style front suspension setups 📦 Part Number: 71139🏁 Brand: Team Associated

Read more less

Traxxas 30° Caster Blocks (2) – PART 3632 Keep your suspension strong and steering responsive with this set of 30° caster blocks from Traxxas. Whether you're replacing worn parts or dialing in your setup, these precision-molded blocks are built tough to handle the rigors of high-speed off-road action. Features: Genuine Traxxas replacement part Designed for consistent steering geometry and durability 30° caster angle for balanced handling on a variety of surfaces Includes left and right side caster blocks Upgrade with confidence—perfect for restoring performance and getting back on track fast.

Read more less

Super powerful double-sided adhesive tape

Read more less

Team Associated 6mm Heavy Duty Ballstud Set (8) – Part 91047Stronger Threads. Smoother Movement. Built for Racing. The Team Associated 6mm Heavy Duty Ballstud Set (91047) is a direct replacement for worn or damaged ballstuds on vehicles like the SC10 4x4, B5, and B5M. Designed for high-strength performance under stress, these ballstuds offer secure fitment and smooth suspension articulation. ✅ Set of 8 heavy-duty 6mm ballstuds✅ OEM fit for SC10 4x4, B5, B5M, and other compatible platforms✅ Heavy-duty steel construction – improved durability in high-load areas✅ Precision fit for smooth ball cup movement✅ Ideal for camber links, steering systems, and shock mounts 📦 Includes: (8) 6mm Heavy Duty Ballstuds Part #: 91047 💡 Pro Tip: Pair with fresh ball cups for smooth, slop-free suspension movement and tighter handling.

Read more less

Precision grip. Tunable feel. Pro-level quality.The PN Racing V2 Strong Tire Tape is the go-to choice for Mini-Z racers who demand consistent tire adhesion and fine-tuned steering response. Made in the USA with a higher-grade adhesive than R246 tape, this V2 version ensures a secure, long-lasting bond between your tires and rims—lap after lap. Tunable traction, your way.Strategically sized slightly narrower than the front wheels (6mm), this tape lets you fine-tune your handling balance. Mount it near the outer edge of the rim for sharper steering response, or closer to the inner edge for smoother, more controlled feel. Whether you’re dialing in for technical tracks or high-speed layouts, PN Racing gives you the flexibility to adapt your setup on the fly. ⚙️ Features V2 high-strength double-sided adhesive for Mini-Z racers Higher-grade compound vs. R246 for superior hold Narrow 6mm width allows steering feel adjustment 15-foot roll – perfect for multiple sets Ideal for front tire mounting and precise tuning Made in the USA 📏 Specifications Spec Detail Width 6mm Length 15 feet Adhesive Type Double-sided (V2 strong) Application Mini-Z Racer Front Wheels Country of Origin USA

Read more less

Keep your suspension performing at its best with the Team Associated 13mm Shock Rebuild Kit. Designed specifically for the B6.4 and B6.4D, this kit includes the essential O-rings and plastic bushings needed to refresh four shocks, restoring smooth, consistent performance on the track. Whether you're doing preventative maintenance or reacting to wear, this factory replacement kit ensures a proper fit and reliable sealing for optimal shock operation. 🛠️ Features Genuine Team Associated replacement parts Restores smooth and consistent shock performance Designed for 13mm shocks Fits Team Associated B6.4 / B6.4D platforms Enough components to service four shocks 📦 Includes O-rings (for four shocks) Plastic bushings (for four shocks) 🔧 Compatibility Team Associated B6.4 Team Associated B6.4D

Read more less

Refined Flex. Enhanced Stability. Race-Proven Performance. The PN Racing G10 Black Fiberglass T-Plate #5 is a high-quality chassis upgrade for the Mini-Z MR03 MM platform, designed to fine-tune your car’s rear suspension stiffness for greater control and precision. Crafted from G10 black fiberglass, this T-plate provides a balance of flexibility and rigidity, making it ideal for racers seeking stability during acceleration and cornering on high-grip tracks. Performance Feel The #5 plate delivers a firmer response than softer options, giving the rear end a more planted feel without compromising smooth weight transfer. Slightly stiffer than standard white fiberglass, it enhances steering precision and consistency through technical sections. Features: Constructed from premium G10 black fiberglass Slightly stiffer than standard white fiberglass versions Provides firm, stable rear suspension feel Ideal for high-grip RCP and indoor carpet tracks Easy direct fit for Mini-Z MR03 MM chassis Flex Rating (Soft → Hard): SOFT → #2 → #3 → #4 → #5 (HARD) Includes: (1) G10 Black Fiberglass T-Plate #5 PN Racing — Precision Engineering for Serious Mini-Z Racers.  

Read more less

Overview:Keep your 1/10 buggy clean, protected, and easy to carry with the ProTek RC 1/10 Buggy Carrier Bag — a practical, travel-friendly storage solution designed by racers, for racers. About the Buggy Carrier Bag Clean. Convenient. Compact.Whether you’re heading to the track or packing for a flight, the ProTek RC 1/10 Buggy Carrying Bag makes transport effortless. Designed to hold one complete 1/10 buggy with the body and tires attached, this durable bag keeps dirt and grime contained while protecting your car during travel. It’s compact enough to stack on top of your hauler bag, store neatly in your vehicle, or roll up when not in use. Durable Three-Ply ConstructionBuilt from a premium three-ply material, the bag combines an easy-to-clean outer and inner layer with a thin foam-padded core for extra protection. Two heavy-duty zippers secure the lid while leaving space for your buggy’s rear wing to remain exposed for easy handling. Grab the integrated side handle, the wing, or attach your own shoulder strap (not included) for versatile carrying options. Features: Fits 1/10 buggies with body and tires installed Keeps dirt, dust, and debris contained Foam-padded for added protection during transport Carry-on sized — ideal for flights and compact storage Rolls up for easy packing when not in use Durable three-ply construction for long life Convenient side handle and optional shoulder strap compatibility Specifications: Fits: 1/10 buggy w/body and tires Dimensions (W x L x H): 11.02 x 16.14 x 4.35 in (28 x 41 x 11 cm) Wing Compatibility: Yes (exposed) Shoulder Strap: Compatible (not included)

Read more less

Add front-end strength and forward weight bias with this 10g Factory Team aluminum bulkhead for the RC10B6 series. Machined from high-quality aluminum and anodized for durability, it’s the perfect upgrade for racers seeking improved handling on high-traction tracks. 🔥 Key Features: CNC-machined aluminum construction for added strength Weighs 10 grams to shift weight forward for better cornering Factory Team part for pro-level durability and performance Hard-anodized finish resists wear and corrosion Direct fit replacement for the stock plastic bulkhead ✅ Compatibility: RC10B6 / B6.1 / B6.2 / B6.3 RC10B6D / B6.1D / B6.2D / B6.3D May also fit SC6 and T6 series vehicles with shared front-end geometry 📦 Includes: (1) 10g Aluminum Front Bulkhead ⚠️ Tip:Consider pairing with additional brass or aluminum weight tuning components for a fully balanced setup.

Read more less

Team Associated B6.1/B6.1D Gear Differential Outdrives [91785] 🔩 Smooth power transfer starts here! These Team Associated Gear Differential Outdrives are the perfect replacement for your B6.1 or B6.1D buggy. Precision-machined and durable, they’re ready to handle race-day abuse while keeping your diff performing like new. ✅ Direct fit for B6.1 and B6.1D gear differentials✅ Includes outdrives and pins for a complete refresh✅ Built tough for consistent, long-lasting performance Includes:(2) Gear Diff Outdrives(2) Outdrive Pins 📦 Part Number: 91785🏁 Brand: Team Associated

Read more less

Traxxas Front Hex Wheel Hub (2) – Part #3654🔧 Keep Your Front End Dialed In. The Traxxas 3654 Front Hex Wheel Hubs are direct replacements for your worn or damaged originals. Designed for a precise factory fit, these hubs ensure your front wheels stay securely mounted and spinning true. Includes the necessary axle pins for a quick, hassle-free install. ✅ Includes two front hex hubs and two axle pins✅ Factory fit for Traxxas 2WD models✅ Keeps wheels aligned and properly secured✅ Easy to install – get back on track in minutes 📦 Includes: (2) Front Hex Wheel Hubs (2) Axle Pins 💡 Pro Tip: Always inspect your hubs and pins for wear—keeping them fresh ensures consistent handling and durability on race day.  

Read more less

Boof RC Aluminum TURNBUCKLE WRENCH SET (4 PCS) 3.0/3.2/3.5/3.7/4.0/5.0/5.5/6.0 AVAILABLE IN BLACK, RED, BLUE OR GREEN

Read more less

Pacer Technology Zip-Kicker Aerosol CA Accelerator – 5oz Instantly Speed Up CA Glue Curing The Pacer Zip-Kicker is a must-have for hobbyists and builders using cyanoacrylate (CA) glues. This accelerator dramatically reduces curing time, allowing you to continue working without delay. Ideal for bonding tough materials and quick repairs! 🧪 Features: ✅ Fast-Acting Formula – Instantly cures most CA adhesives ✅ Aerosol Spray Can – Easy, even application ✅ Cleaner Bonds – Helps reduce blooming and fogging ✅ Works on Tough Surfaces – Great for metal, plastic, rubber, and more 📦 Specifications: Application Type: Aerosol Can Size: 5 Ounce Viscosity: Medium Adhesive Type: Accelerator 🛠 Perfect for use in RC, modeling, crafts, and DIY projects. Just apply CA glue, spray Zip-Kicker, and let the bond set in seconds!  

Read more less

Give your 1/10 off-road buggy maximum rotation, rear tire clearance, and pro-level stability with the JConcepts 7" High Clearance Pre-Cut Wing. Designed for carpet, turf, and dirt setups, this wing arrives pre-trimmed and ready to mount—no scissors, no hassle. Engineered with optimized rake, height, and side-dam shaping, the 0504 wing helps your buggy stay planted on power while freeing up rotation in tight corners. Its universal fit works with most 1/10 2WD and 4WD buggies, making it a must-have tuning item for modern high-grip and high-speed tracks. ⭐ Features Pre-cut design — mount it right out of the package 7" wide High Clearance profile for improved rotation and tire room Short-chord design for quicker steering response Flat-base layout for maximum rear tire expansion clearance Chopped rear corners reduce breakage and increase durability Dual stability fangs for added rigidity and consistent aero feel High rear angle provides excellent high-speed stability ROAR National Champion–proven design Works on most modern 1/10 buggies (2WD & 4WD)

Read more less