MIP Gen 2 1/10 Turnbuckle Wrench (3.70mm) (Lunsford/ProTek/JConcepts) [MIP9820] 🔧 The Legend Returns—Tougher, Smarter, Sleeker.The MIP Gen 2 1/10 Turnbuckle Wrench (3.70mm) is here to make your life easier—whether you’re dialing in toe or wrenching on your pit table before the next heat. Designed for Lunsford, ProTek, JConcepts, and similar 3.7mm turnbuckles, this tool locks in control with pro-grade precision and MIP’s legendary craftsmanship. 🔥 Gen 2 Upgrades:✅ Laser-Etched Size Markings – Instantly spot what you need🎨 Color-Coded Ring – Grab the right tool, every time🛡️ Black Oxide Finish – Rust-resistant, wear-proof, race-ready ⚙️ Wrench Features: Perfectly angled for ergonomic tuning Thin wall design reaches tight spots with ease Hardened steel shaft for long-lasting reliability Deep socket fits nuts on extended screws Polycarbonate handle is comfy, durable, and built for battle Hand-assembled and proudly made in the USA 📦 Includes:(1) Gen 2 1/10 Turnbuckle Wrench (3.70mm) 🧰 Part Number: MIP9820🛠️ Brand: MIP🇺🇸 Made in the USA

Read more less

MIP Nut Driver Speed Tip™ Bundle Set (Metric) [MIP9615] 🚀 Precision at Speed. Power Tool Ready.The MIP Nut Driver Speed Tip™ Bundle is built for fast-paced RC maintenance. Whether you're wrenching in the pits or building at home, these power tool-compatible tips bring pro-level efficiency with legendary MIP durability. Designed for cordless drills and drivers, they help you blast through nut removal without stripping or skipping. 🔥 Gen 2 Upgrades:✅ Laser-Etched Size Markings – Bold, crisp, and permanent🎨 Color-Coded Rings – Instantly spot the right size🛡️ Black Oxide Coating – Fights off rust and wear for long-lasting performance ⚙️ Speed Tip™ Features: Power Tool Compatibility – Fits into drills for quick removal Hardened Steel Shafts – Engineered to last through heavy-duty use Thin Wall Design – Gets into tight spaces without rounding Works with MIP Speed Tip™ Handle (MIP9220) for manual use Each tip is hand-assembled in the USA 📦 Includes:(1) 4.0mm Gen 2 Speed Tip™ Nut Driver(1) 5.0mm Gen 2 Speed Tip™ Nut Driver(1) 5.5mm Gen 2 Speed Tip™ Nut Driver(1) 7.0mm Gen 2 Speed Tip™ Nut Driver(1) 8.0mm Gen 2 Speed Tip™ Nut Driver 🧰 Part Number: MIP9615🛠️ Brand: MIP🇺🇸 Made in the USA  

Read more less

MIP Gen 2 Hex Driver (0.9mm) [MIP9212] 🔧 Mini Tip. Major Performance.When you need pinpoint precision for the tiniest screws in your RC arsenal, the MIP Gen 2 0.9mm Hex Driver is the go-to weapon. Built with the same bulletproof quality MIP is known for, now upgraded for even more durability, comfort, and style.🔥 Gen 2 Upgrades You’ll Love:✅ Laser-Etched Size Markings – No fading, no guessing, just grab and go🎯 Color-Coded Ring – Quickly ID the right tool in a cluttered box🛡️ Black Oxide Finish – Resists rust, scratches, and daily wear💡 Angled Head – Better ergonomics = better control in tight spaces💎 Why MIP Rules the Tool Game: Diamond Ground Tips – Perfect fit, zero cam-out Thin-Wall Shaft – Gets into those tricky, recessed screws Legendary Amber Handle – Comfortable grip, hot or cold 100% USA Made & Hand Assembled – Built to outlast your toolbox📦 Includes:(1) MIP Gen 2 Hex Driver – 0.9mm🧰 Part Number: MIP9212🛠️ Brand: MIP🇺🇸 Made in the USA  

Read more less

Boof RC Charging Lead – XT60 Female to EC3 Male A compact powerhouse for your charging setup, the Boof RC XT60 to EC3 lead is built for racers who need reliable performance and clean connections. Whether you're charging 2S or 3S LiPos, this lead handles the job with ease. ✅ XT60 Female plugs directly into your charger✅ EC3 Male fits many mid-size LiPo batteries✅ Flexible 12 AWG silicone wire for high-current loads✅ Precision-soldered and heat-shrunk for durability✅ Ideal for compact packs used in 1/10 scale vehicles 📏 Length: ~300mm⚡ Wire Gauge: 12 AWG🔌 Connector A: XT60 Female🔌 Connector B: EC3 Male 💡 Boof Tip: EC3 is the go-to connector for mid-range setups—this lead makes charging easy, safe, and fast.

Read more less

4 piece se 4.0  5.5 7.0 8.0     

Read more less

Pro-Motion 2.2" Rear Buggy Wheels (4)Available in White (3050-W) or Yellow (3060-Y) Engineered for Speed. Built to Dominate. Give your buggy the winning edge with Pro-Motion’s 2.2" Rear Wheels, designed for today's high-traction tracks. These wheels feature a reinforced inner rib structure for added durability without the weight penalty. The lightweight design and precision molding ensure a true, balanced rotation—exactly what you need for consistent traction and razor-sharp control. ✅ Fits most 1/10 scale buggies with 2.2" rear wheels✅ Lightweight inner rib design for enhanced strength✅ High-durability construction for racing abuse✅ Built-in vent holes reduce tire distortion✅ Available in sleek White or Fluorescent Yellow 📦 Includes:(4) 2.2" Rear Buggy Wheels 💡 Pro Tip: Match with Pro-Motion front wheels for a full performance setup that looks as good as it drives.

Read more less

Team Associated RC10B74 74mm CVA Bones (2) – Part 92193Smooth Power Transfer. Factory Replacement. The Team Associated RC10B74 74mm CVA Bones (92193) are direct replacement parts designed specifically for the RC10B74 platform. These precision-machined CVA bones are built to handle the rigors of racing, offering consistent drivetrain performance and durability. ✅ Designed for the Team Associated RC10B74✅ Precision-machined for smooth drivetrain engagement✅ Durable construction for long-lasting performance✅ OEM replacement – fits just like the original✅ Ideal for spares or fresh builds 📦 Includes: (2) 74mm CVA Bones Part #: 92193 💡 Pro Tip: Regular inspection and replacement of CVA components can help prevent drivetrain wear and unexpected failures on race day.  

Read more less

Team Associated 12mm Blue Aluminum Shock Bushings (4) – Part 91816Precision Fit. Race-Proven Durability. The Team Associated 12mm Blue Aluminum Shock Bushings (91816) are high-quality replacements designed for enhanced suspension performance and long-lasting durability. Perfect for demanding race setups, these bushings are crafted from lightweight anodized aluminum to maintain alignment and reduce play in the shock mounting. ✅ Fits 12mm shock mount applications on select Team Associated vehicles✅ CNC-machined from high-grade aluminum for strength and precision✅ Anodized blue for a sleek, professional finish✅ Reduces slop and enhances suspension consistency✅ Upgraded alternative to plastic bushings 📦 Includes: (4) 12mm Blue Aluminum Shock Bushings Part #: 91816 💡 Pro Tip: Use with matching shock components for maximum suspension precision and race-level performance.

Read more less

Team Associated 10mm Blue Aluminum Shock Bushings (4) – Part 91815Lightweight. Durable. Precision-Tuned. The Team Associated 10mm Blue Aluminum Shock Bushings (91815) are precision-machined replacements designed to improve durability and reduce slop in your shock mounting setup. These aluminum bushings offer a secure, high-performance fit and are a direct upgrade over stock plastic bushings. ✅ Fits 10mm shock mounts on various Team Associated vehicles✅ Machined from lightweight, high-strength aluminum✅ Anodized blue for a clean factory look✅ Improves durability and shock alignment✅ Direct replacement for worn or damaged bushings 📦 Includes: (4) 10mm Blue Aluminum Shock Bushings Part #: 91815 💡 Pro Tip: Swap out plastic bushings with these for a tighter, more responsive suspension feel—especially under race conditions.  

Read more less

Key Features 7075 T6 aluminum Clamping style with large m2.5 screw Length 18.5mm for smoother steering response and less stress on the servo Laser etched spline size Overview Designed for the steering servo in the RC8B3, RC8B3e, RC8T3, and RC8T3e. These new machined aluminum servo horns are stronger than the stock plastic ones that come with most servos and due to the slightly shorter length, they provide a smoother steering feel while decreasing the load on the servo.   ASC1361

Read more less

Traxxas Hoss 54T Spur Gear – 0.8 Metric Pitch (32P Compatible) – Part 3956XHigh-Torque Gear for Big Power Builds. The Traxxas 3956X 54-Tooth Spur Gear is specifically designed for the Hoss 4X4 VXL 4WD Monster Truck, providing durable power transfer for aggressive driving and brushless torque. With 0.8 Mod metric pitch (compatible with 32-pitch), it’s the perfect match for high-load conditions. ✅ 54-tooth spur gear – factory spec for torque-heavy setups✅ 0.8 Mod (metric pitch) – compatible with 32-pitch pinions✅ Heavy-duty molded construction – strong and durable✅ Designed for Hoss 4X4 VXL – optimized for monster truck drivetrain✅ Requires Traxxas #6780 Center Differential for installation 📦 Includes: (1) 54T Spur Gear (0.8MP / 32P compatible) Part #: 3956X 💡 Note: This spur gear is not a direct bolt-on—you’ll need the TRA6780 center differential to install it properly on the Hoss 4X4 VXL.  

Read more less

Traxxas 54T Spur Gear – 0.8 Mod / 32-Pitch – Part 3956RSmooth Power Transfer. Built for Brushless. The Traxxas 54-Tooth Spur Gear (3956R) is a direct replacement part for high-performance 1/10 scale models using a 0.8 Mod / 32-pitch gear setup. Ideal for brushless power systems, this gear delivers strong, consistent power transfer while holding up to heavy torque. ✅ Tooth Count: 54T – perfect for torque-balanced gearing setups✅ Pitch: 32P / 0.8 Mod – tough and compatible with brushless motors✅ Durable molded construction – long-lasting under load✅ OEM direct fit for Traxxas models using 32P spur gears✅ Compatible with slipper clutch systems 📦 Includes: (1) 54-Tooth Spur Gear (32P / 0.8 Mod) Part #: 3956R 💡 Pro Tip: Pair with the correct pinion gear to dial in your ideal torque vs. speed ratio for your terrain and driving style.  

Read more less

  ARRMA Front & Rear Composite Upper Gearbox Covers / Shock Tower Set Durable Composite Replacement PartsUpgrade or replace your worn-out components with this ARRMA Front and Rear Upper Gearbox Cover and Shock Tower Set. Made from tough composite material, these parts offer reliable durability and precision fitment—keeping your ARRMA vehicle running strong on the track or trail. 🔧 Features: ✅ Tough composite material for long-lasting durability ✅ Precision-manufactured for consistent fit and easy servicing ✅ Integrated gearbox cover, shock tower, body post mount, upper inner suspension mount, and steering brace ✅ High-specification shock towers built for rough terrain 📦 Includes: (1) Front Gearbox Upper Cover (1) Rear Gearbox Upper Cover

Read more less

RPM Extra Wide Front Bumper (Black) – RPM80042 Front-End Armor for Your Associated RideThe RPM Extra Wide Front Bumper is built for drivers who don’t hold back. With a full 6 inches of durable protection, this upgrade guards your chassis during head-on impacts and hard landings — perfect for bashing, racing, or rough terrain adventures. ✅ Features: 📏 6-inch width for maximum front-end coverage 🧱 High-strength RPM nylon absorbs big hits without cracking 🏁 Reinforced ribs double as skid rails for gliding over obstacles 🛬 Extra protection from hard landings and crash damage ⚙️ Direct fit for popular Associated models with no hassle 📦 Includes: (1) RPM Extra Wide Front Bumper (Black) 📊 Specifications: Material: RPM nylon composite Width: 6 in Color: Black Compatibility: Fits vehicles using Associated bulkheads #91359, #91364, or #9562 Compatible Models: Team Associated Trophy Rat Pro2 RT10SW RB10 B5 T5 Whether you bash or race, the RPM Extra Wide Front Bumper adds serious protection where it counts. Don’t just survive impacts — dominate them. 💥

Read more less

  Team Associated 3x24mm V2 Chrome Screw Mount Front Shock Shafts (2pcs) Smooth Front-End Performance for Your B74. Upgrade your RC10 B74 with this set of Team Associated 3x24mm V2 Front Shock Shafts. These chrome-finished, screw-mount style shafts offer enhanced durability, smoother shock action, and a secure fit for high-performance 4WD racing. Designed as a direct replacement or tuning option for your front shocks. 🔩 Features: 🧲 Chrome Coated – For smoother shock travel and reduced stiction 🔧 Screw-Mount Piston Design – Secure piston installation (no E-clips required) 💪 Built for long-lasting performance in competitive conditions 📦 Includes: (2) 3x24mm V2 Chrome Screw Mount Shock Shafts ✅ Compatibility: Team Associated RC10 B74 (Original) Fine-tune your B74 suspension and gain the edge with precision Team Associated hardware.

Read more less

Spektrum RC 3S Smart G2 LiPo Battery (11.1V/850mAh, 30C, IC2) Smarter Power in a Compact Package. The Spektrum Smart G2 3S 850mAh LiPo Battery brings advanced Smart technology to micro and compact-scale RC platforms. With automatic storage discharge, no balance lead, and built-in performance monitoring, this battery is optimized for both safety and convenience. Just plug it in and let Smart technology do the rest! ⚙️ Features: ✅ Smart G2 Technology – stores charge settings, battery health, and cycle history 🔌 IC2 Connector – one plug for power and balancing; no extra leads required 🔄 Auto Storage Discharge after 72 hours of inactivity to 3.90V per cell 🔥 Thicker Internal Plates for better heat dissipation and cell protection ⚡ Up to 1.5A Auto-Discharge Rate – 3x faster than previous G1 Smart batteries 📐 Specifications: Voltage: 11.1V (3S) Capacity: 850mAh Discharge Rate: 30C (Burst) Connector: IC2 Wire Gauge: 12 AWG Battery Type: LiPo (3.7V per cell) Cells: 3 (3S) ⚠️ Note: Requires a Spektrum G2 Smart Charger or updated Smart charger for compatibility. 📦 Perfect for compact aircraft, mini crawlers, or other micro 3S setups.  

Read more less

JConcepts XRAY XB2 2024 "S15" Clear Buggy Body w/Two Wings High-Performance Shell for Elite-Level Racing Give your XRAY XB2 2024 the competitive edge with the JConcepts "S15" Buggy Body. Designed with precision for both the Carpet and Dirt versions of the XB2 2024, the S15 body blends aggressive styling with aerodynamic refinement for maximum performance. Mid-body winglets, a rear stabilizer kick-up, and the iconic “shark fin” cockpit spine enhance stability, steering response, and on-track handling. Whether you're running a tall shorty or the recommended saddle pack layout, the revised side-pods ensure proper clearance and a clean fit. Molded from clear polycarbonate, the S15 is ready for your paint scheme and includes everything you need to finish it off with professional results. ✨ Features: 💨 S15 Styling – Based on the popular Silencer body, tuned for XB2 2024 layout 🧭 Forward Cab Bias – Improves steering and directional stability 🛡️ Mid-Body Winglets – Add downforce and side bite for increased grip 🦈 Cockpit Shark Fin – Enhances high-speed tracking and body rigidity 🔧 Raised Rear Side-Pods – Accommodates multiple battery layouts 🪶 Available in Regular & Lightweight Versions (this version is standard) ✂️ Includes Window Mask & Decal Sheet 📦 Includes: ✔ (1) Clear S15 Body for XRAY XB2 2024✔ (2) Rear Wings✔ (1) Window Mask Sheet✔ (1) JConcepts Decal Sheet ✅ Compatibility: XRAY XB2 2024 Carpet Edition XRAY XB2 2024 Dirt Edition 🖌️ Note: Body comes clear and unpainted. Painted body shown for illustration purposes only.

Read more less

Team Associated RC10B7 Top Shaft – Precision Replacement for Smooth Power Delivery! ⚙️ Keep your RC10B7 or RC10B7D drivetrain performing flawlessly with the Team Associated Top Shaft!This precision-machined replacement part is built to deliver smooth, reliable power transfer, helping maintain your buggy’s peak performance on race day. ✨ Key Features: ⚙️ Precision Machined Top Shaft – Ensures smooth and efficient drivetrain performance 🔧 Direct Replacement – Designed specifically for easy fitment in the RC10B7 and RC10B7D 🏁 Factory Team Reliability – Manufactured to meet Team Associated’s competition-grade standards 🛠️ Essential for Maintenance – Restore like-new drivetrain function after wear or damage 📦 Includes: ✔ (1) Top Shaft 📦 Compatibility: ✅ Team Associated RC10B7 ✅ Team Associated RC10B7D 📌 Note: 🔹 Use as a direct replacement for the stock top shaft.🔹 Recommended for racers looking to maintain drivetrain reliability and performance. 🏁 Maintain peak drivetrain efficiency with the Team Associated Top Shaft! 🔥 Smooth power, consistent performance — race ready with Factory Team precision!   

Read more less

 ⚙️ Precision Gearing. Maximum Durability. Race-Proven Performance. Fine-tune your drivetrain with the Hot Racing Mod 0.5 Hardened Steel Pinion Gear. Precision-machined from hardened steel and finished with a durable blackened coating, these premium pinions are built to withstand the demands of high-performance brushless systems while delivering smooth, efficient power transfer. Available in popular gearing options from 23T through 30T, these gears allow racers and bashers to optimize acceleration, top speed, and motor efficiency for any track or driving style. ⚡ Features: ⚙️ Precision-machined Mod 0.5 gear profile💪 Hardened steel construction for maximum durability🖤 Blackened finish improves wear resistance and appearance🔧 Precision 1/8" (3.17mm) bore for accurate fitment🏁 Available in multiple tooth count options🚀 Ideal for high-performance brushless and brushed applications🧭 Fine-tune acceleration, speed, and motor temperatures🔥 Designed for long-lasting drivetrain reliability 📏 Specifications: Gear Pitch: Mod 0.5Bore Size: 1/8" (3.17mm)Available Tooth Counts: 23T, 24T, 26T, 27T, 29T, 30TMaterial: Hardened SteelFinish: Blackened Steel 📦 Includes: (1) Mod 0.5 Hardened Steel Pinion Gear(1) 3mm Set Screw 🔧 Compatibility: Compatible with vehicles using: Mod 0.5 gearing 3.17mm (1/8") motor shafts Commonly used in many 1/10 scale and mini brushless racing and bashing applications. 💡 Pro Tip: Larger pinion gears increase top speed but also increase motor load and operating temperatures. Smaller pinions improve acceleration and help keep electronics cooler. Always check motor and ESC temperatures after changing gearing to maximize performance and reliability. 🏁⚙️🔥

Read more less

⚙️ Smooth Performance. Complete Bearing Upgrade. Built for the Trail. Restore efficiency and improve drivetrain performance with the FastEddy TRX-4M Ford Bronco Bearing Kit. Designed specifically for the Traxxas TRX-4M Ford Bronco, this complete bearing kit includes high-quality rubber-sealed steel bearings to replace worn bushings and bearings throughout your crawler. Instead of hunting down individual bearing sizes, FastEddy provides a complete application-specific kit so you get exactly what you need to keep your TRX-4M running smooth, efficient, and ready for the next adventure. ⚡ Features: ⚙️ Complete bearing kit designed specifically for the TRX-4M Ford Bronco💪 High-quality rubber-sealed steel bearings🛞 Reduces drivetrain friction for smoother operation🔧 Helps improve efficiency and runtime🏁 Restores worn driveline and axle performance🧰 Convenient complete kit—no guessing bearing sizes🚀 Ideal for maintenance, rebuilds, and performance upgrades 📦 Includes: (8) 3x6x2.5mm Bearings(4) 3.5x7x2.5mm Bearings (Metal Shielded)(4) 4x8x3mm Bearings(4) 5x8x2.5mm Bearings(2) 8x12x3.5mm Bearings 🔧 Compatibility: Traxxas TRX-4M Ford Bronco ⚠️ Important Notes: 📏 Bearing requirements may vary depending on production date and installed aftermarket upgrades.🔍 Please verify bearing sizes on your vehicle before ordering.📸 Product photos showing loose bearings are for illustration purposes only and may not represent the exact contents of the kit. 💡 Pro Tip: One of the best upgrades for any crawler is replacing worn bushings and bearings. A fresh bearing kit helps reduce drivetrain drag, improve battery life, smooth out drivetrain operation, and keep your TRX-4M performing like new on the trail. 🪨🚙🔥

Read more less

🏁⚙️ Fine-Tune Handling & Cornering Performance! The Hot Racing Anti-Roll Sway Bar Set is a performance tuning upgrade designed for the Losi NASCAR and Arrma Typhon Grom platforms. Featuring multiple sway bar stiffness options, this kit allows racers to precisely adjust chassis balance, reduce body roll, and improve cornering consistency for a more planted and predictable driving experience. Whether you're dialing in a race setup or looking for more stability through the turns, this sway bar kit delivers valuable tuning flexibility. 🏁 About the Sway Bar Set ⚙️ Adjustable Suspension Tuning This kit includes three different sway bar diameters, allowing you to adjust front and rear roll stiffness to suit: Track conditions Driving style Tire selection Chassis setup 🏎️ Improved Cornering Stability Proper sway bar tuning helps: Reduce body roll Increase cornering consistency Improve chassis balance Enhance steering response 🔧 Complete Installation Package Includes front and rear mounts, sway bars, sway bar balls, and set screws for a complete tuning solution. 🔧 Features ✔ Adjustable roll stiffness tuning✔ Fine-tunes front and rear suspension response✔ Improves cornering stability✔ Reduces chassis body roll✔ Helps balance steering and rear traction✔ Three sway bar stiffness options included✔ Durable performance upgrade components✔ Designed for competitive tuning applications 📦 Includes (2) 2.0mm Sway Bars (Black) (2) 1.8mm Sway Bars (Chrome) (2) 1.6mm Sway Bars (Gold) (1) Front Sway Bar Mount (1) Rear Sway Bar Mount (4) Sway Bar Balls with Set Screws 🚗 Compatibility Losi NASCAR Arrma Typhon Grom 💡 Perfect For ✔ Oval racing setups✔ NASCAR Grom tuning✔ Typhon Grom handling upgrades✔ Reducing body roll✔ Fine-tuning suspension performance ⚠️ Notes Designed for Losi NASCAR and Arrma Typhon Grom platforms Additional Hot Racing mounts may be required for some Arrma Grom applications Verify compatibility before installation      

Read more less

⚙️🏁 Ultra-Lightweight Performance for Maximum Efficiency The eXcelerate ION Aluminum 64 Pitch Pinion Gear is engineered for racers looking to reduce rotating mass and maximize drivetrain efficiency. Precision CNC-machined from high-strength aluminum, these lightweight pinions help improve acceleration and throttle response while maintaining excellent durability for competitive racing applications. Available in a wide range of tooth counts from 23T to 70T to help fine-tune gearing for any track condition. 🏁 About the ION Pinion Gear ⚡ Lightweight Performance Design The ultra-light aluminum construction reduces rotating mass, helping: Improve acceleration Increase drivetrain efficiency Enhance throttle response 🔧 Precision Machined Accuracy Each pinion is CNC-machined to ensure: Precise gear mesh Smooth operation Consistent performance 🛡️ Durable Anodized Finish The anodized coating helps reduce wear while maintaining a professional race-ready appearance. 🔧 Features ✔ Ultra-lightweight design for quicker acceleration✔ Precision CNC-machined construction✔ High-strength aluminum material✔ Durable anodized finish✔ Laser-etched tooth count identification✔ Smooth and efficient power transfer✔ Available in multiple tooth counts 📊 Specifications Pitch: 64 Pitch Bore: 3.17mm (1/8") Tooth Count Options: 23T–70T Material: Machined Aluminum Finish: Anodized 📦 Includes (1) eXcelerate ION Aluminum 64P Pinion Gear 💡 Perfect For ✔ 1/10 Electric Touring Cars✔ 1/10 Off-Road Buggies✔ Carpet Racing✔ Oval Racing✔ Competitive Stock & Modified Classes ⚠️ Notes Select desired tooth count when ordering Designed for motors with a 3.17mm (1/8") shaft Verify gearing compatibility before installation

Read more less

🌈✨ Bright Pop. Smooth Flow. Perfect for Eye-Catching Detail. The DSPIAE Soft Tip Fluorescent Acrylic Paint Markers deliver bold, high-visibility color for models, RC bodies, and creative projects. With a flexible sponge tip and high-coverage formula, these markers make it easy to add vibrant highlights and standout accents. 🏁 About the Fluorescent Markers 🌈 High-Visibility Color Designed with bright fluorescent pigments, these markers add eye-catching detail that pops under normal and bright lighting. 🎯 Precision & Versatility The soft sponge tip allows for both fine detail work and broader coverage—perfect for panel accents, highlights, and custom designs. 🧼 Easy Application & Cleanup The water-based acrylic formula provides smooth coverage while allowing easy corrections using alcohol. 🔧 Key Features ✔ High-coverage fluorescent acrylic formula✔ Bright, high-visibility colors✔ Flexible soft sponge tip for multiple techniques✔ Fine tip for detail and panel lining✔ Side stroke for larger coverage✔ Easy correction with alcohol✔ Ergonomic triangular barrel for comfort✔ Color-coded ends for quick identification 📦 Includes (1) Soft Tip Water-Based Acrylic Paint Marker 🎨 Available Fluorescent Colors (Variants) Fluorescent Red Fluorescent Yellow Fluorescent Orange Fluorescent Pink Green 💡 Perfect For ✔ Gunpla (Gundam model kits)✔ Pokémon model kits✔ RC body accents and highlights✔ Scale modeling and crafts 🧰 Recommended Use Highlighting edges and details Custom color accents Panel line enhancement with bold color  

Read more less

  🏁 Proven Race Design. Low Profile. Track-Ready Performance. The JConcepts S2 body for the 22X-4 is a championship-proven shell designed to deliver balanced handling, improved airflow, and a low center of gravity for competitive 4WD buggy racing. 🏁 About the S2 Body 🏎️ Low-Profile Performance The low overall height lowers the center of mass, helping your buggy stay planted through corners and transitions. 🎯 Balanced Handling A progressive cab design adds front-end downforce, improving steering response and overall balance on track. 🌬️ Optimized Airflow The channeled roof and side-pod vents improve airflow while adding rigidity to the body structure. 🔧 Key Features ✔ JConcepts Silencer 2 (S2) styling✔ Low-profile design for improved handling✔ Progressive cab for enhanced steering✔ Channeled roof for airflow and rigidity✔ Side window design for classic race look✔ Includes S-Type rear wings✔ Includes window masks and decal sheet 📦 Includes (1) Clear S2 Buggy Body (2) S-Type Rear Wings Window Mask JConcepts Decal Sheet 🚗 Compatibility Team Losi Racing 22X-4 1.0 Team Losi Racing 22X-4 2.0 ⚠️ Note: Body comes clear and unpainted Painted examples shown are for reference only 🏁 Lower CG. Better balance. Built to win on any track.  

Read more less

Gear Set Overview:This is a replacement differential ring gear and pinion gear set designed for select Traxxas models. It helps maintain smooth power transfer and reliable drivetrain performance. 🔧 Key Features ✔ Replacement ring & pinion gear set✔ Maintains smooth power transfer✔ Supports drivetrain durability✔ Direct fit design 📦 Includes (1) Ring Gear (1) Pinion Gear 🚗 Compatibility Fits select Traxxas models using this gear set Ideal for replacing worn or damaged gears, this set helps keep your drivetrain running smoothly and consistently.    

Read more less

  Tape Set Overview:This is a replacement hook & loop tape set designed for securing bodies on Team Losi Racing platforms. It provides a simple and reliable way to mount and hold your body in place. 🔧 Key Features ✔ Hook & loop mounting system✔ Helps secure body panels✔ Easy to apply and replace✔ Direct replacement set 📦 Includes (8) Hook Side Tabs (10x20mm) (8) Loop Side Tabs (10x20mm)

Read more less

  🔩 A simple, go-to tool for cutting wire, zip ties, and small RC components. These BOOF RC diagonal pliers are a solid addition to any pit box or workbench. 🔧 Highlights: ✔ Clean, precise cutting✔ Comfortable grip handles✔ Great for general RC use✔ Easy, reliable everyday tool 🔧 Simple. Solid. Gets it done.BOOF RC – No nonsense. Just works.    

Read more less

Easily connect your power system with the Spektrum IC3 to JST Adapter, designed to link IC3 batteries to JST-equipped devices. This compact adapter provides a simple plug-and-play solution for running smaller electronics without modifying your wiring. Featuring a female IC3 connector to female JST connector, this adapter ensures a secure and reliable connection while keeping your setup clean and efficient. 🔧 Features:• Converts IC3 battery connection to JST device• Female IC3 to female JST configuration• Compact, easy-to-use plug-and-play design• Reliable connection for consistent power delivery• No soldering required 📦 Includes:• (1) IC3 to JST Adapter ⚙️ Specifications:• Connector Type: IC3 (Female) to JST (Female) ✅ Compatibility:• E-flite UMX Cirrus SR22• E-flite UMX Citation Longitude• E-flite UMX Conscendo• E-flite UMX P-51D• E-flite UMX P-51D Voodoo• E-flite UMX Pitts S-1S• E-flite UMX Timber X Keep your setup flexible and ready to run with the Spektrum IC3 to JST adapter, making it easy to power JST-equipped models from IC3 batteries.    

Read more less

Stay powered all day with the ProTek RC 1S High Capacity Transmitter Battery, designed specifically for the Sanwa M17. With a massive 5500mAh capacity, this LiPo battery delivers extended runtime, making it perfect for long race days, practice sessions, and events where reliability matters. Lightweight and compact, this pack fits perfectly in the M17 transmitter while providing consistent power output. The JR connector ensures easy installation, and the high capacity means fewer interruptions and more time on the track. 🔧 Features:• High capacity 5500mAh for extended runtime• Designed for Sanwa M17 transmitters• Lightweight LiPo construction• Provides consistent and reliable power output• Ideal for long race days and extended use 📦 Includes:• (1) ProTek RC 1S LiPo Transmitter Battery ⚙️ Specifications:• Voltage: 3.7V (1S)• Capacity: 5500mAh• Chemistry: LiPo• Connector: JR• Charge Rate: 1C• Dimensions: 79 x 46.5 x 12mm• Weight: 94g ⚠️ Battery Notes:• Use foam padding in the transmitter compartment to secure the battery• Always use a LiPo-compatible charger and balance charge• Do not overcharge or over-discharge• Never leave charging unattended Designed for serious racers, the ProTek RC 5500mAh transmitter battery keeps your Sanwa M17 running longer so you can stay focused on the race.  

Read more less

Boof RC B6 2S–6S Charge Board Make charging multiple batteries easier and more organized with the Boof RC B6 2S–6S Charge Board. Designed to work with popular B6-style balance chargers, this board allows you to conveniently connect and balance charge 2S through 6S LiPo batteries from a single charging station. Perfect for racers and hobbyists managing multiple packs, the board helps keep your charging setup clean while providing quick access to the most common balance ports. 🔧 Features:• Compatible with B6-style LiPo balance chargers• Supports 2S to 6S LiPo batteries• Organized balance ports for easy battery connections• Clean and efficient charging station setup• Durable board design for repeated use 🏁 Perfect For:• RC racers charging multiple packs• Organized pit table charging setups• LiPo battery balance charging• Cars, trucks, boats, and aircraft The Boof RC B6 2S–6S Charge Board helps simplify your charging routine so you can spend less time managing batteries and more time driving.

Read more less

2700mmx140mmx19mm integrated shock holders

Read more less

 Fine-tune the rear suspension geometry of your Team Associated RC10B7.1 with the Factory Team Aluminum Arm Mount “C” Block (-1°) (92585). Designed for the B7.1 buggy platform, this precision aluminum mount adjusts rear toe characteristics to help racers dial in stability and cornering response for different track conditions. Machined from high-quality aluminum and finished in Factory Team blue, this upgrade provides increased strength and consistent alignment compared to standard composite mounts. The -1° configuration allows racers to modify rear suspension geometry to improve balance, traction, and rotation through corners. This arm mount is a direct replacement for the RC10B7.1 kit and can also be used as an upgrade option for the B7.1D, offering racers additional setup flexibility with the 3-gear gearbox configuration. Features• -1° rear toe geometry adjustment for suspension tuning• Factory Team aluminum construction for strength and precision• Improves rear suspension alignment and durability• Designed for 3-gear gearbox configuration• Ideal tuning upgrade for the Team Associated B7.1 platform Includes• (1) RC10B7.1 Factory Team 3-Gear Gearbox Aluminum Arm Mount “C” Block (-1°)          

Read more less

Restore precise front suspension performance with the Team Associated RC10B7.1 Factory Team Front Shock Tower (-2mm) (92581). Designed for the B7.1 buggy platform, this tower maintains accurate shock mounting geometry and consistent front-end handling during racing and practice. The -2mm lowered design helps reduce the center of gravity, improving stability and responsiveness on high-traction surfaces such as carpet and groomed dirt tracks. Built with Factory Team precision, this component ensures dependable durability and consistent suspension performance for competitive racing. Engineered specifically for the Team Associated B7.1, it installs easily as a direct replacement to keep your buggy performing at its best. Features• -2mm lowered shock tower design for improved stability• Maintains accurate front suspension geometry• Supports consistent steering response and handling• Factory Team precision engineering for race performance• Direct replacement for the RC10B7.1 / B7.1 buggy platform Includes• (1) RC10B7.1 Factory Team Front Shock Tower (-2mm)      

Read more less

Upgrade the precision and feel of your front suspension with the Team Associated RC10B7.1 Factory Team Carbon Caster & Steering Blocks Set (92577). Designed as a premium upgrade for the B7.1 buggy platform, this set improves steering response and delivers the connected front-end feel competitive racers demand. Incorporating Factory Team carbon construction, these components reduce weight while maintaining excellent stiffness and durability. The result is sharper steering input, consistent suspension geometry, and confident cornering performance on high-grip race tracks. Engineered specifically for the Team Associated B7.1, this set integrates seamlessly with the chassis and suspension layout while providing multiple KPI steering block options to fine-tune front-end handling for different track conditions. Features• Factory Team carbon construction for lightweight strength• Improved steering precision and responsiveness• Maintains accurate suspension geometry• Multiple KPI steering block options for front-end tuning• Premium Factory Team upgrade for the B7.1 platform Includes• (2) Carbon Caster Blocks• (2) 4L/R Carbon Steering Blocks (KPI0)• (2) 4L/R Carbon Steering Blocks (KPI2)• (2) 3L/R Carbon Steering Blocks (KPI0)• (2) 3L/R Carbon Steering Blocks (KPI2) A race-ready upgrade for drivers looking to maximize steering precision and performance from their RC10B7.1 / B7.1 buggy.  

Read more less

The Team Associated RC10B7.1 Front Suspension Arms (92574) are precision replacement components designed to maintain accurate steering response and predictable handling on the track. These arms play a critical role in supporting consistent front-end geometry, helping drivers maintain control through technical sections and high-speed corners. Engineered specifically for the RC10B7.1 platform, these suspension arms integrate seamlessly with the chassis to deliver reliable performance under competitive racing conditions. Their purpose-built design ensures dependable durability and precise fitment, making them essential for keeping your buggy performing at its best. Features• Optimized steering geometry for improved front-end response• Race-tuned handling balance for consistent performance• Platform-specific design for RC10B7.1• Precision manufacturing for a perfect fit and reliable operation Includes• (1) Left RC10B7.1 Front Suspension Arm• (1) Right RC10B7.1 Front Suspension Arm  

Read more less

    Upgrade your small-scale build with the Spektrum RC 10Amp Brushed 2-in-1 ESC/SLT Receiver Combo (SPMXSE2425RX). Designed for convenience and performance, this compact unit combines a 10A brushed ESC and SLT receiver into one module, simplifying wiring and saving valuable space in tight chassis layouts like the Axial SCX24 and other 1/24 scale vehicles. With adjustable running modes, drag brake tuning, low-voltage protection, and a built-in fail-safe, this combo gives you dependable control and tunability for crawling or trail driving. It also supports 2S LiPo or NiMH batteries, making it a versatile choice for a wide range of micro builds. Features• 2-in-1 ESC and SLT receiver combo for simplified installation• Adjustable drag brake for improved crawling control• Low voltage warning for LiPo battery protection• Built-in fail safe for added safety and reliability• Adjustable running modes (Fwd/Rev/Brake or Fwd/Rev)• Compact design perfect for 1/24 scale vehicles Specifications• Continuous Current: 10A• Receiver Frequency: 2.4GHz (SLT2)• Battery Compatibility: 2S LiPo / NiMH• BEC Output: 1A / 5V (Switch Mode)• Battery Connector: PH 2.0• Motor Connectors: PH 2.0• Dimensions: 33 x 33 x 15mm• Compatible Motors: DYNS1217 Includes• (1) Spektrum 10A Brushed 2-in-1 ESC / SLT Receiver Combo• (1) Binding Plug• Product Manual A clean, compact electronics solution that makes your next micro crawler or small-scale build easier than ever.  

Read more less