Team Exalt X-Rated 2S 135C HVX LiHV LCG Shorty Battery (7.6V/5100mAh) High Voltage. Race Ready. ROAR Approved. Give your setup the edge it deserves with the Team Exalt X-Rated HVX LiHV Battery. Built for competition, this 7.6V 2S LCG pack combines advanced chemistry, low resistance, and Silicone Graphene tech for powerful, consistent output and longer cycle life. The hardcase shorty design makes it perfect for tight 1/10 chassis builds where balance and performance are critical. ⚙️ Features: ✅ 135C Continuous Discharge Rate for maximum punch ⚡ LiHV (7.6V) design for high-voltage performance 🧠 Silicone Graphene Technology for lower IR and longer life 🔌 5mm High-Amp Bullet Connectors included 🏁 ROAR Approved since Dec. 2024 – race legal and track ready 🧊 LCG Hardcase to fit snug in shorty-compatible chassis 📐 Specifications: Voltage: 7.6V (LiHV 2S2P) Capacity: 5100mAh Continuous Discharge: 135C Dimensions: 96 x 46 x 22.5mm (LxWxH) Weight: 210g (7.40oz) Connector Type: 5mm bullets Balance Plug: 2mm bullets Watt Hours: 38.8Wh Charge Rate: 1C Max Configuration: LCG Hardcase Shorty ROAR Approved ✅ 💥 Optimized for elite 1/10 scale racing in both off-road and on-road platforms.Stay cool, stay powerful — Exalt X-Rated gets you to the finish line faster.  

Read more less

LC Racing L5051 Aluminum BHC Servo Horn 23T +3mm (For BHC-1)

Read more less

  Upgrade your drivetrain with the LC Racing CVD Drive Shaft Set, designed for smoother power delivery, improved efficiency, and increased durability. Perfect for racers and bashers who demand precision and reliability from their RC. Features: Constant Velocity Drive (CVD) design for smooth, efficient power transfer Reduces drivetrain chatter and binding for improved handling High-strength steel construction for long-lasting durability Direct replacement for stock drive shafts on compatible LC Racing models Includes: Complete CVD Drive Shaft Set An ideal upgrade for maintaining consistent performance and handling, run after run.

Read more less

🔧 Keep your Maxx steering strong and precise. These replacement Traxxas Maxx Steering Blocks are a direct factory fit for the Maxx 1/10 Monster Truck. Built to OEM specs, they restore smooth steering performance and ensure proper front-end alignment—perfect for repairs or routine maintenance. ✅ Genuine Traxxas replacement parts✅ Direct fit for quick installation✅ Restores factory steering performance✅ Vehicle Compatibility: • Traxxas Maxx 📦 Includes:• (1) Left Steering Block• (1) Right Steering Block

Read more less

⚙️ Strength where it matters most. Upgrade your rear drivetrain with the Hot Racing Rear Steel CVD Axle Set, built for Losi NASCAR and Arrma Grom series vehicles (Granite Grom, Mojave Grom, Typhon Grom). Crafted from CNC-machined steel and paired with aluminum clamp-style hex hubs, these axles deliver superior strength, smooth operation, and better durability than factory dog bones and plastic shafts. ✅ Direct replacement for stock CVD dog bones✅ Heavy-duty CNC steel construction✅ Pre-assembled for quick installation✅ Aluminum wheel hex hubs for improved reliability✅ Compatible with ARA330840 rear arms & ARA330841 knuckles✅ Vehicle Compatibility: • Arrma Granite Grom • Arrma Mojave Grom • Arrma Typhon Grom • Losi NASCAR 📦 Includes:• (1) Rear Steel CVD Axle Set (pre-assembled)• Aluminum wheel hex hubs 💡 Pro Tip: Apply a light coat of grease to CV joints for smoother performance and extended life. 📦 Includes: • (1) Front Steel CVD Axle Set (pre-assembled)• Aluminum wheel hex hubs 💡 Pro Tip: Apply a light layer of grease to CV joints for maximum performance and longevity.  

Read more less

  Upgrade your drivetrain with the Traxxas 5556 Aluminum Slipper Pressure Plate & Hub Set. Designed as a direct replacement, this high-quality aluminum set provides enhanced strength, precision, and heat dissipation over stock components — keeping your slipper clutch operating smoothly under pressure. ✅ Features: Precision-machined aluminum construction Helps reduce heat buildup and wear in the slipper clutch Ideal for high-performance applications Genuine Traxxas replacement part for optimal fit and function 📦 Includes: (1) Aluminum Slipper Pressure Plate (1) Aluminum Slipper Hub Whether you're rebuilding or upgrading, this slipper plate and hub combo is built to handle serious power!

Read more less

Unlock faster, smarter charging for your TRX-4M with the Traxxas EZ-Peak® iD® Charger Port Adapter! Designed to work seamlessly with Traxxas EZ-Peak iD Chargers, this adapter lets you charge your TRX-4M 7.4V 2S LiPo battery with all the enhanced features—faster charge times, automatic detection, and storage charging modes. 🔋 Compatible With: TRX-4M⚡ Works With: Traxxas EZ-Peak iD Chargers✅ Enables high-speed charging✅ Allows access to iD Charger features like storage mode✅ Genuine Traxxas part for a perfect fit Upgrade your charging game and get back on the trail faster!  

Read more less

🛠️ The ultimate cutting companion for precision hobby work, model building, crafts, and more! This deluxe knife set includes everything you need for clean, accurate cuts on a wide range of materials. Housed in a premium wooden case with a secure latch, it's the perfect addition to your toolbox or workstation. Includes:• (3) Ergonomic Handles – Precision, Trimming & Cutting• (15) SK5 Carbon Steel Blades – Straight, Chisel, Fine Point, Scoring & More• (1) Wooden Organizer Case with Blade Storage Compartment• Packaged in a stylish paper gift box Perfect for:• RC Builds & Scratch Projects• Paper, Plastic, Wood, Foam, Leather & More• Artists, Designers, Hobbyists & Modelers 🔪 Ultra-sharp SK5 steel for long-lasting performance🔒 Safe & neat storage in custom wood case💡 Comfortable grip reduces fatigue for fine, steady cuts Take your hobby work to the next level with BOOF precision. 👊

Read more less

The ultimate tool for hobbyists, techs, and DIY pros! Compact, powerful, and USB rechargeable, the BOOF RC Power2 makes quick work of all your precision screwdriving tasks. 🔧 Dual-position handle – switch between straight or pistol grip for tight spaces🔧 Forward/Reverse control for quick tightening or removal🔧 Cordless design with built-in LED light for visibility in dark spots🔧 USB rechargeable – plug into your laptop, power bank, or car charger🔧 Includes 5 long bits, USB cable & 269g lightweight driver Perfect for:• RC builds & repairs• Home assembly & upgrades• On-the-go fixes 📦 Includes:(1) Electric Screwdriver(5) Long Bits(1) USB Charging Cord Ready when you are. Built BOOF tough. 💪

Read more less

Restore precision steering to your Maxx with this genuine Traxxas replacement bellcrank set. Designed specifically for the Maxx 1/10 4WD Brushless Monster Truck, this set includes all the essential components needed for a complete steering assembly refresh. 🛠️ Features: Direct OEM replacement for the Maxx Maintains crisp, responsive steering performance Built from high-strength materials for durability under heavy loads 📦 Includes: (2) Steering Bellcranks (1) Bellcrank Support (1) Servo Saver (1) Servo Saver Spring (1) Draglink (2) 3x20mm Shoulder Screws Keep your Maxx sharp and responsive—perfect for high-speed runs and rugged off-road terrain.

Read more less

Keep your suspension solid and secure with this pack of Traxxas Suspension Pin Retainers for the X-Maxx and XRT. Designed to hold the hinge pins in place at the inner upper arm position, these retainers are a must-have for routine maintenance or repairs. 🔧 Includes: (4) Suspension Pin Retainers 🛠️ Features: Direct replacement parts for Traxxas X-Maxx and XRT Ensures secure hinge pin fitment Made from durable molded composite Simple install – ideal for repairs or spares Don’t let loose pins take you out of the action—keep your X-Maxx or XRT dialed in with these factory-spec retainers!

Read more less

  🔩 Secure Your Suspension SetupThis Shock Standoff Bushing Set is a direct replacement for the Losi Mini-T 2.0 and also fits the Mini-B. Whether you're doing routine maintenance or replacing worn parts, this set ensures your shocks stay mounted securely and operate smoothly. 🛠️ Key Features: Direct fit for Mini-T 2.0 and Mini-B Includes both shock standoffs and shock cap bushings Keeps suspension firm and aligned Durable construction for long-lasting use 📦 Includes: (2) Shock Standoffs (2) Shock Cap Bushings ✅ Compatibility: Losi Mini-T 2.0 Losi Mini-B Perfect for restoring performance and keeping your suspension dialed in!

Read more less

Take your Mini-T 2.0 or Mini-B to the next level with this precision-machined aluminum rear hub upgrade. Built for performance and longevity, these CNC-cut hubs offer increased strength, improved durability, and a custom anodized finish that makes your ride look as good as it performs. 🔧 Features:✅ CNC machined aluminum construction for max durability✅ Anodized black with silver chamfered edges for a custom look✅ Direct fit with upgraded strength over stock plastic✅ Includes ball studs for hassle-free installation 📦 Includes:• (1) Left Aluminum Rear Hub• (1) Right Aluminum Rear Hub• (2) Ball Studs 🚗 Compatibility:• Losi Mini-T 2.0• Losi Mini-B

Read more less

Upgrade your Mini-T 2.0 with Losi’s 0° Aluminum Caster Blocks, built for precision, strength, and style. CNC-machined and anodized black with sleek silver chamfered edges, these caster blocks are a perfect replacement for worn-out plastic parts and ideal for racers seeking tighter tolerances and improved durability. 🔧 Features:✅ 0° caster angle for sharp, predictable steering✅ CNC machined from durable aluminum✅ Anodized black finish with silver highlights✅ Direct fit with no modifications needed 📦 Includes:• (1) Left Aluminum Caster Block – 0°• (1) Right Aluminum Caster Block – 0° 🚗 Compatibility: • Losi Mini-T 2.0 Losi Mini-B  

Read more less

Upgrade your suspension game with these Team Associated 3x23mm V2 Ti-Nitride Front Shock Shafts. Built for precision and durability, these screw-mount shafts are a perfect fit for racers looking to keep their ride smooth and responsive. 🔧 Features:✅ Titanium Nitride coating for reduced friction and wear✅ Screw-mount design for secure, reliable installation✅ Precision machined for consistent performance 📦 Includes:(2) 3x23mm Front Shock ShaftsMounting Hardware 🚗 Compatibility:• Team Associated B64D• Team Associated B6 Series• Team Associated B74 / B74.2• Team Associated B7 / B7D• Team Associated SR10• Team Associated RB10

Read more less

This is a Reedy Flat Sensor Wire. The flat sensor wires that are included with the Reedy Sonic motor are now available separately in a variety of lengths to suit 1/10 and 1/8 applications! The flat design looks great and provides an extremely clean look. Choose from between 70mm and 270mm lengths.

Read more less

Team Associated RC10B6.4 / B7 Steering Hat Bushing Set – ASC91974Upgrade or replace worn bushings with this genuine Team Associated Steering Hat Bushing Set. Originally designed for the RC10B6.4 and B6.4D, this set is also compatible with the RC10B7 series. Perfect for keeping your steering smooth and precise, this pack includes four bushings – just what you need to tighten up your front end feel. ✅ Fits: RC10B6.4 RC10B6.4D RC10B7 RC10B7D 📦 Includes: (4) Steering Hat Bushings OEM Part #: ASC91974

Read more less

Team Associated 13mm Front Shock Spring (Blue/4.80lbs) (54mm) [71162] 🚀 Soak up the bumps. Stick the landing. These 13mm Front Shock Springs are built for serious performance on your T6.2 or SC6.2 when upgraded to 13mm shocks. With a 4.80 lb/in rate and 54mm length, they strike the perfect balance—soft enough for buttery-smooth cornering, firm enough to eat up big landings. Upgrade your front-end feel and dial in that confidence. 🔥 Features:✅ Blue rate: 4.80 lbs/in✅ Length: 54mm✅ Perfect for 13mm shocks✅ Great low-speed feel + high-speed support✅ Includes 2 springs 📦 Part Number: 71162🏁 Brand: Team Associated

Read more less

Team Associated 13mm Rear Shock Spring (Grey/2.55lbs) (72mm) [71165] 🛞 Smoother landings. Better cornering. Upgrade your suspension game with these 13mm Rear Shock Springs from Team Associated. Designed for the T6.2 and SC6.2 when equipped with 13mm shocks, these springs deliver a plush low-speed response while still offering the support you need for big jump landings. It’s the best of both worlds—smooth over the bumps, firm on the hits. 🔥 Features:✅ Grey rate: 2.55 lbs/in✅ Length: 72mm✅ Optimized for 13mm shocks✅ Delivers soft feel with firm pack✅ Includes 2 springs 📦 Part Number: 71165🏁 Brand: Team Associated

Read more less

Team Associated RC10B74 Factory Team LTC Metal Differential Rebuild Set. This is an optional part intended for the B74 series of buggies. Includes: (2) Differential side gears (4) Differential Spider gears (2) Outdrive shims (4) Spider gear shims COMPATIBILITY: Team Associated RC10 B74 OriginalTeam Associated RC10 B74.1Team Associated RC10 B74.1DTeam Associated RC10 B74.2Team Associated RC10 B74.2D

Read more less

Team Associated RC10B74.2 0 and 2mm Front Gearboxes. This is a replacement intended for the RC10B74.2 and B74.2D series of vehicles. Package includes one 0mm height front differential gearbox with cover and one 2mm height front differential gearbox with cover. COMPATIBILITY: Team Associated RC10 B74.2Team Associated RC10 B74.2D

Read more less

Team Associated RC10B7 Spur Gear Cover, Bumpers & Bulkhead Shims Set [92427] 🔧 Protect, Reinforce, ReplaceKeep your RC10B7 in peak form with this official replacement set! Whether you’re freshening things up or replacing worn components, this kit has you covered—literally. Includes everything you need to protect your spur gear, brace your bulkheads, and shield your ride from front-to-rear. 🛠️ Set Includes:✅ Front Bumper✅ Rear Bumper✅ Spur Gear Cover✅ Bulkhead Shims 🔩 Part Number: 92427🚗 Compatible With: Team Associated RC10B7 Team Associated RC10B7D

Read more less

Team Associated RC10B7/B7D Factory Team Aluminum One-Piece Servo Mount (Blue) [92456] 💙 Lock It Down. Steer with Precision.Take your B7 or B7D to the next level with the Factory Team One-Piece Servo Mount! Crafted from ultra-light, tough-as-nails aluminum and finished in anodized blue with crisp chamfers and a laser-etched FT logo, this upgrade is all about flex-free performance and next-level style. Say goodbye to servo slop and hello to razor-sharp steering! 🔧 Upgrade Highlights:✅ One-piece flex-free design = increased steering precision🎯 Factory Team anodized finish with machined highlights💪 CNC aluminum construction—lightweight + durable✨ Laser-etched FT logo for pro-level bling 📦 Includes:(1) Blue Factory Team One-Piece Servo Mount 🔩 Part Number: 92456🚗 Compatible With: Team Associated RC10B7 Team Associated RC10B7D

Read more less

MIP Gen 2 Hex Driver (.050") – MIP9200 The legendary MIP tool gets a next-gen upgrade! The MIP Gen 2 Hex Driver (.050") brings all the precision and comfort you expect—with improved durability, upgraded design, and pro-level performance for serious RC builders and racers. Key Features: .050" precision-cut tip with thin-wall design for tight clearances Black Oxide coating protects against corrosion and wear Laser-etched size markings for quick identification Color-coded ring for easy size reference Angled tool head offers improved ergonomics Comfortable polycarbonate handle performs in all weather Hand-assembled and made 100% in the USA Includes: (1) MIP Gen 2 Hex Driver (.050") Built to last. Engineered to perform. Trusted by pros. The Gen 2 series keeps the legend alive—with even more to love.

Read more less

MIP BLACK HANDLE Hex Driver (0.05”) – MIP9000B Back by popular demand – the Limited-Edition MIP Black Handle Hex Driver (0.05”) is here! Precision-made and proudly built in the USA, this tool is a must-have for racers and builders who demand accuracy, comfort, and craftsmanship. Features: Precision hex tip cut with a diamond wheel for ultimate accuracy CNC-ground shank from U.S. grade tool steel drill blanks Ultra-tight manufacturing tolerances held within 20 microns Resilient black polycarbonate handle stays comfortable in hot or cold conditions Each tool is carefully hand-assembled 100% manufactured and packaged in the USA Perfect for detailed builds and fine tuning, this limited-edition driver blends performance and style in one premium package.

Read more less

Treal Hobby Type K 1.0" 12-Hole Beadlock Classic Vintage Wagon Wheels (Black, Bronze, Grey, Silver) (4) – 28.9g Each Give your micro crawler that scale vintage flair with Treal Hobby's Type K 1.0" Classic Wagon Wheels. These beadlock rims are CNC machined from aluminum and feature interchangeable brass center rings for added weight and realism. Each set adds a total of 115.6g of unsprung weight down low—improving traction, crawling stability, and overall performance. Offered in four sleek finishes—Black, Bronze, Grey, and Silver—these wheels let you customize your rig’s style while maintaining premium durability and functionality. Features: Classic 12-hole vintage design Beadlock for easy mounting—no glue needed CNC-machined aluminum construction Brass center ring for added weight and balance Removable hex hub for offset tuning and customization Available in Black, Bronze, Grey, and Silver Adds 115.6g total weight (28.9g per wheel) Specifications: Application: 1/24 & 1/18 Micro Crawlers Outer Diameter: 1.22in (31mm) Wheel Diameter: 1.0in (25.4mm) Width: 0.5in (12.7mm) Hex Hub: 7mm (0.275in) Weight (each): 28.9g assembled Includes: (4) Type K 1.0" Beadlock Wheels in your choice of finish Brass center rings Removable hex hubs Upgrade your mini crawler’s looks and performance with the scale detail and rock-solid grip of Treal Hobby's Type K wheels.

Read more less

Traxxas Rod Ends w/ Hollow Balls (12) – Part #5525🔧 Ready-to-Install Reliability The Traxxas 5525 Rod Ends are a direct replacement part designed to deliver precision and durability. Perfect for suspension and steering links, these rod ends come pre-installed with hollow pivot balls for a hassle-free installation and solid performance. ✅ Includes factory-installed pivot balls✅ Perfect fit for Jato, Slayer, and many other Traxxas vehicles✅ Durable nylon construction✅ Great for steering and camber link replacements 📦 Includes: (12) Rod Ends (12) Hollow Pivot Balls (pre-installed)

Read more less

Traxxas Front Axles (2) – Part #3637🛠️ Built Tough. Ready to Roll. Keep your front end dialed in with this set of two genuine Traxxas front axles. Whether you're replacing worn-out components or stocking up your pit box, these axles are designed to deliver the durability and performance you expect from Traxxas. ✅ Direct replacement for multiple Traxxas vehicles✅ Strong and reliable factory fit✅ Ideal for restoring smooth front-end function 📦 Includes: (2) Front Axles 💡 Pro Tip: Always inspect axles for wear or bends after hard impacts—fresh parts mean better handling!

Read more less

Boof RC Adapter – TRX-Style Male to XT60 Female (14AWG, 5cm) Need to connect your TRX-style battery to an XT60 charger or ESC? This compact Boof RC adapter makes the conversion effortless. Built with 14AWG silicone wire and a short 5cm length for a clean, efficient setup. ✅ TRX-style (male) to XT60 (female)✅ Compact 5cm length—perfect for tight spaces✅ Durable 14AWG flexible silicone wire✅ Great for chargers, ESCs, and adapter setups✅ Plug and play—no tools needed 📏 Wire Gauge: 14AWG📐 Length: 5cm🔌 Connector Type: TRX-Style Male to XT60 Female 💡 Boof Tip: Keep one in your pit box to bridge your TRX packs with XT60-based gear—no rewiring required!

Read more less

Boof RC Adapter – T-Style Plug (Female) to EC3 (Male) with Short Wire Need to connect EC3 batteries to a T-plug setup? This Boof RC adapter features a clean, flexible short-wire design that gets the job done—no soldering needed. ✅ T-Style Female (Deans-type) to EC3 Male✅ Short wire provides flexibility without the bulk✅ Gold-plated connectors for reliable performance✅ Great for charging or running mismatched plug types 🔌 Connector A: T-Style (Female)🔌 Connector B: EC3 (Male)📏 Wire Length: Short (approx. 2–3 inches) 💡 Boof Tip: A handy solution for adapting gear on the fly—keep one in your box and never miss a heat.

Read more less

Pro-Motion 2.2" Rear Buggy Wheels (4)Available in White (3050-W) or Yellow (3060-Y) Engineered for Speed. Built to Dominate. Give your buggy the winning edge with Pro-Motion’s 2.2" Rear Wheels, designed for today's high-traction tracks. These wheels feature a reinforced inner rib structure for added durability without the weight penalty. The lightweight design and precision molding ensure a true, balanced rotation—exactly what you need for consistent traction and razor-sharp control. ✅ Fits most 1/10 scale buggies with 2.2" rear wheels✅ Lightweight inner rib design for enhanced strength✅ High-durability construction for racing abuse✅ Built-in vent holes reduce tire distortion✅ Available in sleek White or Fluorescent Yellow 📦 Includes:(4) 2.2" Rear Buggy Wheels 💡 Pro Tip: Match with Pro-Motion front wheels for a full performance setup that looks as good as it drives.

Read more less

Team Associated RC10B74 74mm CVA Bones (2) – Part 92193Smooth Power Transfer. Factory Replacement. The Team Associated RC10B74 74mm CVA Bones (92193) are direct replacement parts designed specifically for the RC10B74 platform. These precision-machined CVA bones are built to handle the rigors of racing, offering consistent drivetrain performance and durability. ✅ Designed for the Team Associated RC10B74✅ Precision-machined for smooth drivetrain engagement✅ Durable construction for long-lasting performance✅ OEM replacement – fits just like the original✅ Ideal for spares or fresh builds 📦 Includes: (2) 74mm CVA Bones Part #: 92193 💡 Pro Tip: Regular inspection and replacement of CVA components can help prevent drivetrain wear and unexpected failures on race day.  

Read more less

Traxxas 54T Spur Gear – 0.8 Mod / 32-Pitch – Part 3956RSmooth Power Transfer. Built for Brushless. The Traxxas 54-Tooth Spur Gear (3956R) is a direct replacement part for high-performance 1/10 scale models using a 0.8 Mod / 32-pitch gear setup. Ideal for brushless power systems, this gear delivers strong, consistent power transfer while holding up to heavy torque. ✅ Tooth Count: 54T – perfect for torque-balanced gearing setups✅ Pitch: 32P / 0.8 Mod – tough and compatible with brushless motors✅ Durable molded construction – long-lasting under load✅ OEM direct fit for Traxxas models using 32P spur gears✅ Compatible with slipper clutch systems 📦 Includes: (1) 54-Tooth Spur Gear (32P / 0.8 Mod) Part #: 3956R 💡 Pro Tip: Pair with the correct pinion gear to dial in your ideal torque vs. speed ratio for your terrain and driving style.  

Read more less

Traxxas Black Antenna Tube & Cap Part #: 1726A | Keep Your Signal Clean and Secure Maintain optimal signal clarity and a clean look with the Traxxas 1726A Black Antenna Tube & Cap Set. Designed for durability and fitment, this set includes everything you need to route and protect your receiver antenna wire properly. 📦 Includes: (1) Black Antenna Tube (1) Vinyl Antenna Cap (1) Wire Retainer ✅ Features: Durable black antenna tube for a sleek, low-profile look Vinyl cap protects the antenna tip from wear and damage Wire retainer ensures secure installation Compatible with most Traxxas models 🧰 Essential for any Traxxas build or repair to protect your radio system's performance.

Read more less

  ARRMA Front & Rear Composite Upper Gearbox Covers / Shock Tower Set Durable Composite Replacement PartsUpgrade or replace your worn-out components with this ARRMA Front and Rear Upper Gearbox Cover and Shock Tower Set. Made from tough composite material, these parts offer reliable durability and precision fitment—keeping your ARRMA vehicle running strong on the track or trail. 🔧 Features: ✅ Tough composite material for long-lasting durability ✅ Precision-manufactured for consistent fit and easy servicing ✅ Integrated gearbox cover, shock tower, body post mount, upper inner suspension mount, and steering brace ✅ High-specification shock towers built for rough terrain 📦 Includes: (1) Front Gearbox Upper Cover (1) Rear Gearbox Upper Cover

Read more less

Flysky FS-R4P 4-Channel 2.4GHz ANT Receiver Compact. Capable. Reliable.The Flysky FS-R4P is a lightweight, 4-channel receiver designed for use with Flysky transmitters utilizing the ANT protocol. With plug-and-play simplicity and reliable long-range performance, it’s an excellent choice for RC cars, boats, and other surface applications. ✅ Features: 🔁 4-channel PWM output for straightforward servo or ESC control 📶 ANT protocol for fast, stable 2.4GHz signal 🛰️ 100–300 meter ground range for long-distance control 🧲 Integrated single antenna keeps the setup compact and clutter-free ⚡ Wide input voltage range of 3.5–8.4V 🪶 Lightweight and compact at just 6 grams 🔌 Easy plug-and-play setup — ideal for beginners and pros alike 📦 Includes: (1) Flysky FS-R4P 4-Channel Receiver (1) Instruction Manual 📊 Specifications: Channels: 4 Frequency: 2.4GHz Protocol: ANT Range: 328–984ft (100–300m) Input Voltage: 3.5–8.4V Dimensions: 22.6 x 20.6 x 25.5mm (0.89 x 0.81 x 1.0in) Weight: 6g (0.21oz) For RC drivers looking for a simple yet powerful receiver, the FS-R4P is a reliable solution that won’t weigh you down. 🏁  

Read more less