Dial in elite front-end steering and precision with the JConcepts Pin Swag LP Wide 2.2" Front Carpet Tires — engineered for today’s high-grip carpet racing where responsiveness, consistency, and low-rolling resistance matter most. Designed for 2WD front buggies, the Pin Swag blends the proven outer lug profile of the Swagger with a dense cluster of micro pins for unreal grip and smooth, predictable steering. The wide, low-profile carcass offers a larger contact patch and flatter feel, helping your buggy stay aggressive without getting twitchy. Hybrid Pin + Swag Traction The design combines: Outer Swag lugs for crisp steering bite Tightly packed round pins for smooth forward grip and minimized wear A split center section that flexes naturally for carpet surface compliance Together, they deliver a fast, confident front-end feel that works across layouts — technical, high speed, or tight and grippy. Engineered for Carpet Performance Built on the same low-profile concept that made the Fuzz Bites so successful, the Pin Swag rolls through corners with ease. A vertical rib paired with a staggered inside section adds stability on corner entry, while the directional layout provides consistent steering through the full rotation. The scalloped tire beads remove unnecessary weight, reducing rotational mass and helping your buggy accelerate and rotate quicker through the infield. Features JConcepts original hybrid Pin + Swag lug design Low-profile, wide-body carcass for increased front contact patch Crisp-tipped round pins for maximum bite Durable, dense pin layout to minimize wear Smooth Swag transition near the sidewall for predictable cornering Ultra-light scalloped beads for reduced rotating mass Compatible with all standard 2.2” 2WD front buggy wheels Includes (2) Pin Swag LP Wide 2.2" 2WD Front Buggy Tires (Pink Compound) (2) Low-profile scalloped foam inserts  

Read more less

Precision Fit. Compact Power. Built for Mini-Z. The PN Racing Pro-4 Socket Driver (4.5mm) is purpose-built for Mini-Z racers who demand accuracy, comfort, and reliability. Designed specifically for Mini-Z 2mm lock nuts, this professional-grade nut driver offers a secure fit and smooth torque transfer, helping you make precise adjustments quickly and confidently. Trackside Ready Performance Featuring a lightweight aluminum handle and precision-machined socket, the Pro-4 driver provides excellent grip and control for high-torque applications. The adjustable shaft length (100mm–155mm) gives you flexibility for both close-quarter and deep-reach maintenance, while the compact 18mm handle diameter ensures comfortable handling during long race prep sessions. Features: Designed for Mini-Z 2mm lock nuts 4.5mm precision socket for secure fit and smooth operation Adjustable length: 100mm to 155mm Ergonomic 18mm handle for comfort and control High-quality aluminum construction for durability and precision Includes: (1) PN Racing 4.5mm Pro-4 Socket Driver PN Racing — The Tools Behind Every Fast Lap.

Read more less

Compatible with iCharger, iSDT, and SkyRC Chargers Overview:The TQ Wire XT60 2S Charge Cable delivers the perfect balance of premium materials, versatile connectivity, and durability. Designed for serious RC racers and hobbyists, this lead makes charging your 2S LiPo batteries easier, cleaner, and more reliable—whether you’re in the pit or at the track. About the XT60 2S Charge Cable Built for Performance and DurabilityFeaturing dual-size stepped bullets (4mm & 5mm), this cable ensures compatibility with a wide range of LiPo batteries. The 2-foot cable uses 12-gauge high-strand silicone wire wrapped in protective black nylon mesh, giving you maximum current flow and long-lasting flexibility. The XT60 connector provides a secure, low-resistance connection to your charger, compatible with popular models such as the Junsi X6 iCharger, iSDT, and SkyRC B6, as well as other chargers that use an XT60 output. Premium Design FeaturesTQ Wire went the extra mile with a molded strain relief housing around the bullet connectors and balance port, ensuring a stronger connection and minimizing wire fatigue. Integrated “grippers” make it easy to remove the bullets from your battery safely and efficiently—no more struggling with tight fits or risking wire damage. Features: XT60 connector for charger connection (iCharger/iSDT compatible) 4mm & 5mm stepped bullets fit most 2S LiPo packs Durable molded strain relief for long life and safety Integrated “grippers” for easy battery removal Heavy-duty 12-gauge silicone wire for efficient power transfer Wrapped in black nylon mesh for protection and clean looks 2-foot length provides ample reach without clutter Specifications: Specification Details Length 2 feet (610mm) Wire Gauge 12 AWG Charger Connector XT60 Battery Connectors 4mm & 5mm Stepped Bullets Balance Port XH Compatibility Junsi X6 iCharger, SkyRC B6, iSDT, and any XT60-output charger Includes: (1) TQ Wire 2S XT60 Charge Cable with 4mm/5mm Bullets Note:TQ Wire also offers a version with low-profile 90° tubes instead of the XT60 connector for alternative setups.

Read more less

Keep your Traxxas vehicle running smooth with this pack of 6x12x4mm ball bearings. Designed as a direct replacement, these bearings reduce friction, improve efficiency, and help extend the life of your drivetrain. ✅ Direct Replacement – OEM Traxxas quality and fit✅ Smooth Performance – Reduces friction for improved speed and efficiency✅ Durable Design – Built to handle the demands of RC bashing and racing Includes: (2) Traxxas 6x12x4mm Ball Bearings Part Number: 5117 Simple, effective, and essential — the Traxxas 5117 Ball Bearings are a must-have for keeping your RC vehicle running at peak performance.

Read more less

Overview:Secure your battery with confidence using the Team Associated RC10B7 Factory Team Battery Mount Set. Designed as a precision upgrade over the standard mounts, this Factory Team kit delivers improved strength, reduced flex, and a cleaner look for your B7 buggy. With its lightweight design and race-proven durability, it’s the perfect addition for serious racers who demand reliability and performance. Features: Factory Team precision-machined components for strength and fit Securely holds battery in place under high loads and hard landings Lightweight design reduces unnecessary weight Provides a cleaner, more professional chassis layout Genuine Team Associated Factory Team upgrade Compatibility: Team Associated RC10B7 1/10 2WD Buggy Includes: (1) Factory Team Battery Mount Set (with mounting hardware) Part Number: 92482 ⚡ Pro Tip: Pair this with the B7 Factory Team Carbon Side Rails (92483) for the ultimate lightweight and rigid chassis setup.  

Read more less

  Overview:The Traxxas 7mm Wheel Hub Hex Set is a genuine replacement part for the TRX-4M 1/18 scale crawler. Precision-molded for durability, these hubs provide a secure and accurate wheel fit, ensuring smooth power transfer from the axles to the wheels. Perfect for replacing worn or damaged hubs, they help maintain your TRX-4M’s performance on any trail. Features: Includes 4 wheel hub hexes 7mm size for a secure wheel fit Durable construction for long-lasting performance Direct factory replacement for quick and easy installation Genuine Traxxas part for guaranteed quality and fit Compatibility: Traxxas TRX-4M 1/18 Scale Crawler (all versions: Bronco, Defender, etc.) Includes: (4) 7mm Wheel Hub Hexes Part Number: 9750X

Read more less

  Keep your BHC-1 handling at its best with the LC Racing Front Suspension Arms. Designed for a perfect fit and maximum durability, these arms are built to handle the demands of competitive racing and high-performance driving. Features: Precision-molded for the LC Racing BHC-1 Strong, durable material for long-lasting performance Maintains proper suspension geometry for consistent handling Direct replacement for factory-installed arms Includes: (2) Front Suspension Arms Ideal for replacing worn or damaged arms to keep your BHC-1 race-ready.

Read more less

Upgrade or replace your BHC-1’s steering precision with the LC Racing Top Plate & Ball Stud Mount. Designed specifically for the BHC-1 platform, this high-quality component ensures solid, consistent performance and a perfect factory fit. Features: Precision-engineered for the LC Racing BHC-1 Durable construction for long-lasting reliability Provides a secure mounting point for steering ball studs Maintains chassis stiffness and steering accuracy Includes: (1) Top Plate (1) Ball Stud Mount Perfect for racers looking to keep their BHC-1 handling sharp and track-ready.

Read more less

Team Exalt X-Rated 2S 135C HVX LiHV LCG Shorty Battery (7.6V/5100mAh) High Voltage. Race Ready. ROAR Approved. Give your setup the edge it deserves with the Team Exalt X-Rated HVX LiHV Battery. Built for competition, this 7.6V 2S LCG pack combines advanced chemistry, low resistance, and Silicone Graphene tech for powerful, consistent output and longer cycle life. The hardcase shorty design makes it perfect for tight 1/10 chassis builds where balance and performance are critical. ⚙️ Features: ✅ 135C Continuous Discharge Rate for maximum punch ⚡ LiHV (7.6V) design for high-voltage performance 🧠 Silicone Graphene Technology for lower IR and longer life 🔌 5mm High-Amp Bullet Connectors included 🏁 ROAR Approved since Dec. 2024 – race legal and track ready 🧊 LCG Hardcase to fit snug in shorty-compatible chassis 📐 Specifications: Voltage: 7.6V (LiHV 2S2P) Capacity: 5100mAh Continuous Discharge: 135C Dimensions: 96 x 46 x 22.5mm (LxWxH) Weight: 210g (7.40oz) Connector Type: 5mm bullets Balance Plug: 2mm bullets Watt Hours: 38.8Wh Charge Rate: 1C Max Configuration: LCG Hardcase Shorty ROAR Approved ✅ 💥 Optimized for elite 1/10 scale racing in both off-road and on-road platforms.Stay cool, stay powerful — Exalt X-Rated gets you to the finish line faster.  

Read more less

  Easily connect batteries and electronics with different plug types using the Gens Ace XT60 Male to Deans (T) Female Adapter Cable. Perfect for racers and bashers who want quick compatibility without rewiring. Features: XT60 Male to Deans (T) Female adapter for versatile connectivity High-quality construction for safe, efficient power transfer Compact design for easy use in tight spaces No soldering required — plug-and-play convenience A handy tool for your RC pit box to keep you running, no matter what connectors you’re working with.

Read more less

Upgrade or refresh your RC10B7’s steering and suspension with this genuine Team Associated rod end set. Designed specifically for the Team Associated RC10B7 1/10 buggy, these rod ends deliver the precision fit, smooth articulation, and durability you need to keep your buggy performing at its best. 📦 Includes: (16) Rod Ends 🔧 Compatibility: Team Associated RC10B7 1/10 Buggy 💡 Perfect for replacing worn or damaged rod ends to restore crisp steering response and suspension performance.

Read more less

Dial in your drivetrain with the Team Associated RC10B74 Center Differential Spur Gear Set! This set includes both a 72-tooth and a 78-tooth spur gear, giving you versatile gearing options to match your track conditions and driving style. 🔧 Key Features: Includes (1) 72T and (1) 78T spur gear Precision-molded for smooth and efficient power delivery Allows for quick gearing adjustments for acceleration or top speed Genuine Team Associated parts ensure perfect fit and durability ✅ Compatibility: Team Associated RC10B74 May also fit other B74-based platforms with center differential setups Tweak your setup for the perfect balance of speed and control—whether you're hitting the straights or tightening your corners!

Read more less

Tired of swapping wrenches? The BOOF RC 4-in-1 Hex Driver is the ultimate compact tool for RC maintenance, giving you four popular sizes in one ergonomic handle. Includes:• (1) Aluminum Handle• (1) 1.5mm Hex Driver• (1) 2.0mm Hex Driver• (1) 2.5mm Hex Driver• (1) 3.0mm Hex Driver Features:✔ CNC machined hard alloy steel tips✔ Comfortable non-slip grip✔ Compact & travel-friendly✔ Designed for RC cars, drones, models & more Perfect for trail tool bags or pit boxes—BOOF RC keeps it simple and strong.  

Read more less

🔩 Upgrade your pit setup with this premium 3-piece BOOF RC hex wrench set. Crafted from high-strength aluminum alloy, each driver features dual-head hex sleeves for quick, efficient maintenance of your RC car parts. Includes Sizes:• 4.0mm / 4.5mm• 5.0mm / 5.5mm• 7.0mm / 8.0mm Highlights:✔ Lightweight aluminum alloy construction✔ CNC-machined for precision fit✔ Comfortable knurled grip for control✔ Perfect for wheels, nuts, and hardware on most 1/10 and 1/8 scale RC vehicles 🔧 Durable. Accurate. Ready for race day.BOOF RC – Tools that keep you dialed in      

Read more less

ProTek RC 2 Cell LiPo Battery: 7.6V High-Voltage Performance The ProTek R/C ULCG (Ultra Low Center of Gravity) 2S 130C Graphene + HV 4400mAh Shorty LiPo Battery is a great battery option for anyone looking for a lightweight, shorty style battery. The HV 4400mAh is the lightest (154 grams) and thinnest (18.3mm) Shorty race battery ProTek has produced to date, all while delivering race winning and industry leading capacity and peformance. When compared to standard LiPo and LiHV, Silicon Graphene cells deliver improved efficiency, lower operating temperatures, lower internal resistance, better run time, increased cycle life and increased voltage. This pack is ideal pack for 2WD and 4WD modified racing, or stock class racers that want optimum voltage for the entire run. The improved efficiency of this pack will allow for lower operating temperatures and lower internal resistance. This gives users a more consistent battery pack. ProTek Graphene + 130C Packs deliver the power needed by serious racers and enthusiasts alike. Lab testing has shown that ProTek R/C Silicon Graphene packs have double the cycle life when charged at 1C rates, and can be charged at higher amp rates, with less risk of damage to the pack. More importantly, the discharge curve is flatter, meaning the cells maintain higher voltage throughout the discharge cycle with no significant drop off. Additionally, when compared to conventional LiPo batteries Silicon Graphene batteries are lighter, providing a higher capacity per gram ratio. With 7.6V nominal voltage, 130C discharge ratings, incredibly high charge rates and ten different models to choose from, ProTek R/C 130C Graphene + packs are perfect for racers and bashers that demand the absolute best. Features: Lighter and thinner than previous hardcase 2S LiPo packs Provides great runtime, with incredible voltage and punch Silicone Graphene can handle more abuse and deliver more current than a standard LiPo battery Improved efficiency, lower operating temperatures, and lower internal resistance! 10C max charge rates - 1C charge rate recommended for longest life Perfect for stock class racers looking to shave grams IMPORTANT LITHIUM POLYMER SAFETY INFORMATION DO NOT leave a battery in your model when charging DO NOT leave lithium batteries unattended when charging ALWAYS balance charge lithium battery ALWAYS use a LiPo Safe charging bag/box YOU MUST use a Li-Poly specific charger to charge lithium batteries (NiMH or NiCD only chargers WILL NOT WORK!) YOU MUST not over discharge lithium battery packs READ & UNDERSTAND the instructions carefully before operating this battery NOTE: When using high energy Li-Polymer Batteries, please do not over-discharge or over-charge batteries as this will result in overheated batteries. Discharging capacity can't exceed 80% of the max capacity of the pack after full charging to ensure a good cycle performance. It is recommended to fully charge a brand new battery before using and only discharge the battery 50% for the first 5 cycles. Always monitor race time and/or set a low voltage warning on ESC (End voltage cannot be lower than 3.2v per cell). Do not use a battery that has too low a voltage. Do not expose batteries to sunshine or store/charge batteries at temperatures above 35°C or in a closed car. The high-temperature environment could cause damage to the pack or make it burst. If the battery becomes hot while fast charging, high current discharging, or racing, do not charge it until it has cooled completely. Wait about 20 mins, then inspect prior to recharging. Includes: (1) ProTek R/C Battery (2) 5mm to 4mm Bullet Reducers (2) 5mm Bullet Connectors (1) 2mm Balance Bullet Connector Specifications

Read more less

Upgrade your rear end with strength and style. The Losi Aluminum Rear Pivot Block Set brings precision-machined durability to your Mini-T 2.0 or Mini-B. Whether you're racing or bashing, these high-quality parts hold alignment better and stand up to abuse with sleek black anodizing and silver chamfered edges. 🔧 Features:✅ CNC machined aluminum construction for long-lasting performance✅ Black anodized finish with silver chamfers for a premium look✅ Includes both rear inner and outer pivot blocks✅ Improves durability and suspension consistency 📦 Includes:• (1) Rear Inner Pivot Block• (1) Rear Outer Pivot Block• Hardware 🚗 Compatibility:• Losi Mini-T 2.0• Losi Mini-B

Read more less

Boost durability and style with the Losi Mini-T 2.0 Aluminum Front Pivot. Precision CNC-machined from aluminum and finished in sleek black with silver chamfered edges, this upgrade adds strength right where it counts. Perfect for high-impact racing or just giving your Mini some custom flair. 🔧 Features:✅ CNC machined for precision fit✅ Anodized black with silver chamfered edges✅ Stronger than stock plastic part✅ Adds a premium, custom look 📦 Includes:• (1) Aluminum Front Pivot• (2) Set Screws 🚗 Compatibility:• Losi Mini-T 2.0• Losi Mini-B

Read more less

Keep your steering tight and responsive with the Losi Mini-T 2.0 Bellcrank Set. Designed as a direct replacement for worn or damaged components, this kit brings back factory steering precision so you can stay on target lap after lap. 🔧 Features:✅ Genuine Losi replacement for factory steering✅ Durable construction for long-lasting performance✅ Includes hardware for a complete install✅ Restores smooth, consistent steering feel 📦 Includes:• (1) Bellcrank Set• (Hardware) 🚗 Compatibility:• Losi Mini-T 2.0• Losi Mini-B

Read more less

Step up your racing game with these Stiffezel Front Suspension Arms for the TLR 22X! Engineered for high-performance racers, these arms provide increased stiffness and durability to enhance cornering, reduce flex, and maximize your control on high-bite tracks. 🔥 Features: Precision-engineered for the TLR 22X platform Stiffezel material delivers superior rigidity over stock arms Sharper steering response and enhanced high-speed handling Reduced flex = more precise suspension feel Perfect for traction-rich surfaces 📦 Includes:(2) Stiffezel Front Suspension Arms ✅ Compatibility:• TLR 22X• TLR 22X-4• TLR 22X-4 Elite• Losi 22S Sprint  

Read more less

This is a replacement Stiffezel Rear Arm Set for the Team Losi Racing 22 5.0 DC Elite 1/10 2WD Electric Buggy. Designed for VHA (Variable Hinge Angle) setups, these rear arms are optimized for dirt and clay tracks, offering enhanced rigidity and consistent performance. ✅ Fits:• TLR 22 5.0 DC Elite (2WD Buggy) ✅ Includes:• (1) Pair of VHA Stiffezel Rear Suspension Arms Perfect for racers looking to maintain top-tier handling and durability on loose surfaces.

Read more less

Upgrade your 22 5.0 series with precision gearing using the TLR 48 Pitch SHDS Spur Gear. Designed for use with the optional TLR Complete SHD Slipper System (TLR232085), these spur gears offer smooth, consistent performance and are available in a variety of tooth counts from 69T to 81T. ✅ Compatible with:• Losi 22 5.0 (with SHD Slipper System) ✅ Features:• High-strength composite construction• Available in multiple tooth counts (69T–81T)• Designed for 48 pitch setups• Perfect for fine-tuning your gear ratio 📦 Includes:(1) SHDS Spur Gear (choose tooth count)

Read more less

Fine-tune your buggy’s balance and handling with the Team Associated Steel Servo Chassis Weight, designed specifically for the RC10B6 and B6D platforms. Weighing in at 24 grams, this precision steel weight mounts securely under the servo to help lower the center of gravity and improve front-end stability — perfect for high-grip surfaces or drivers looking for a more planted feel. Constructed from high-quality steel, this tuning upgrade helps smooth steering response and adds consistency through corners without compromising agility. Installation is quick and easy using the included mounting screws. ⚙️ Features: Adds 24 grams of weight to optimize front-to-rear balance Lowers center of gravity for improved handling and steering feel Precision fit for Team Associated B6 and B6D buggies Ideal for high-traction tracks and fine-tuning race setups Made from durable steel for long-lasting performance Includes mounting hardware for easy installation 📏 Specifications: Part Number: 91747 Material: Steel Weight: 24g Vehicle Compatibility: Team Associated RC10B6 / B6D 📦 Includes: (1) 24g Steel Servo Chassis Weight (2) Mounting Screws 💡 Pro Tip:Combine this servo weight with a rear ballast plate or brass front bulkhead for the ultimate balance adjustment — helping you dial in your buggy to match any track condition.

Read more less

Team Associated CVA/Wheel Hex Pin (4) [91436]🔩 Lock It Down with Precision!The Team Associated CVA/Wheel Hex Pin Set is your go-to solution for keeping your drivetrain tight and reliable. These precision steel pins are perfect replacements for connecting rear CVA axles and bones, or securing wheel hexes to both front and rear axles. 🛠 Features:✅ Durable steel construction✅ Perfect fit for CVA assemblies and wheel hexes✅ Essential for smooth, consistent performance 📦 Includes:(4) CVA/Wheel Hex Pins 🔥 Part Number: 91436🏁 Compatible with multiple Team Associated platforms

Read more less

Upgrade your drivetrain with the Team Associated Factory Team 11mm Octalock LCF Slipper Pad. Originally launched with the RC10B74.1 buggy, this pad is designed to work with Octalock spur gears and offers smoother, more consistent slipper performance. It also serves as an optional upgrade for the original RC10 B74 series. ✅ Factory Team Performance – Designed for competitive precision and durability✅ Octalock Compatible – Works with Team Associated Octalock spur gears✅ Optional Upgrade – Updates older B74 models to the latest slipper assembly✅ Race Proven – Trusted by Team Associated drivers worldwide Compatibility: Team Associated RC10 B74 (original) Team Associated RC10 B74.1 Team Associated RC10 B74.1D A must-have for serious racers, the 11mm Octalock LCF Slipper Pad keeps your buggy smooth, efficient, and race-ready.

Read more less

Team Associated RC10B74.1 Anti-Roll Bar Set (1.8–2.0mm) – 92291🎯 Rear-End Mastery, Dialed to Perfection Step up your tuning game with this optional 1.8–2.0mm rear anti-roll bar set for your RC10B74.1 or B74.1D. Designed for racers who crave consistency and performance, this set lets you tweak rear-end roll stiffness to match track conditions with precision. 💡 Adjustment Effects:🔄 Softer = More rear roll, more rear grip, less front grip, less on-power steering🚀 Stiffer = Less rear roll, less rear grip, more on-power steering, quicker response in chicanes 💪 Key Features:✅ Includes 1.8mm, 1.9mm, and 2.0mm sway bars✅ Increases tuning flexibility for race-day perfection✅ Precision fit for RC10B74.1 and B74.1D buggies 🔧 Includes:• (1) 1.8mm Sway Bar• (1) 1.9mm Sway Bar• (1) 2.0mm Sway Bar 📦 Part Number: 92291🏁 Brand: Team Associated

Read more less

Team Associated RC10B74.1/RC10B74.1D Factory Team LTC Plastic Differential Rebuild Set. This is an optional differential rebuild set intended for the RC10B74.1 and RC10B74.1D. This differential rebuild uses the updated LTC (Low Torque Capacity) gearset allowing for improved driveability and traction. The high tooth count on the gears makes for smoother differential action that won't lock on power. NOTE: Recommended starting diff oils for dirt and clay are 15k (ASC5447) front, 200k (ASC5461) center, 10k (ASC5455) rear. Recommended starting diff oils for carpet and Astro turf are 20k (ASC5456) front, 15k (ASC5447) rear. COMPATIBILITY: Team Associated RC10 B74.1Team Associated RC10 B74.1DTeam Associated RC10 B74.2Team Associated RC10 B74.2D

Read more less

Team Associated RC10B74.2 FT Chassis Protective Sheet. This is an optional chassis protective sheet intended to fit the Team Associated RC10B74.2 buggy. Using high quality adhesive backed vinyl, Team Associated has created a durable protective surface that not only is functional but looks great! Printed on the sheet is an accurate depiction of the B74.2 drivetrain layout, providing an "X-Ray" style look to the bottom of your vehicle. Package includes one main chassis protection sheet and three tail pieces giving you two extras.   COMPATIBILITY: Team Associated RC10 B74.2Team Associated RC10 B74.2D

Read more less

Team Associated RC10B7 Factory Team Carbon Gearbox – 92406Upgrade your RC10B7 or B7D with the Factory Team Carbon Laydown Gearbox. Built with carbon-infused material, this optional gearbox delivers enhanced rigidity and long-lasting durability. Ideal for racers chasing ultimate chassis stiffness and consistent power transfer. Note: Increased rigidity may reduce rear traction depending on track conditions. ✔️ Carbon-infused for superior stiffness and durability✔️ Designed for RC10B7 and RC10B7D 2WD buggies✔️ Laydown configuration for optimized weight distribution✔️ Genuine Factory Team performance part✔️ Includes: (1) Carbon laydown gearbox housing Built to handle high power with Factory Team precision. 🏁  

Read more less

Team Associated RC10B7 Idler Gears (3) [92421] 🌀 Smooth Power, Every LapKeep the drivetrain of your B7 running smooth and strong with these genuine Team Associated RC10B7 Idler Gears. Designed for durability and precision, this 3-gear set ensures optimal power transfer and consistent performance during hard racing or long practice days. 🛠️ Includes:✅ (3) Idler Gears 🔩 Part Number: 92421🚗 Compatible With: Team Associated RC10 B7 Team Associated RC10 B7D

Read more less

Team Associated RC10B7 Shock Tower Covers & Upper Wing Mount [92487] 💥 Upgrade your B7 with Precision Fit & Factory Style!Keep your buggy looking factory fresh and race-ready with the Team Associated RC10B7 Shock Tower Covers & Upper Wing Mount. Designed specifically for the RC10B7 platform, this set adds clean protection for your shock towers while locking down your rear wing with a durable, lightweight upper mount setup. 🏁 Why You’ll Love It:✅ Direct fit for the B7 platform—no mods needed🛡️ Protects your shock towers from dirt, debris, and damage🚀 Lightweight upper wing mount keeps your wing locked and stable🔩 Includes all the hardware you need—bolt it on and go! 📦 Includes:(2) Front Shock Tower Covers(1) Rear Shock Tower Cover(1) Upper Wing Mount SetMounting Hardware 🛠️ Part Number: 92487🏎️ Vehicle Compatibility: Team Associated RC10B7  

Read more less

MIP Gen 2 Metric Nut Driver (7mm) [MIP9804] 🔧 Classic Look, New-Level Performance.The MIP Gen 2 Metric Nut Driver (7mm) is built for serious RC work—whether you're building, wrenching, or tuning. This precision tool makes quick work of scale hardware, with rock-solid accuracy and grip in even the tightest spots. 🔥 Gen 2 Upgrades:✅ Laser-Etched Markings – Crisp and easy to read🎨 Color-Coded Ring – Spot your size fast🛡️ Black Oxide Coated Shaft – Fights rust, scratches, and wear ⚙️ Tool Features: Hardened steel shaft for tough, long-term use Deep socket design fits long screws and recessed nuts Thin wall for tight space access Ergonomic polycarbonate handle — comfy in all temps Hand-assembled and 100% made in the USA The go-to 7mm nut driver for pros and weekend warriors alike 📦 Includes:(1) Gen 2 Metric Nut Driver (7mm) 🧰 Part Number: MIP9804🛠️ Brand: MIP🇺🇸 Made in the USA

Read more less

Boof RC 12AWG Silicone Wire – Black (1 Meter / 3.3 Feet) 🖤 Sleek Looks. Reliable Power. Boof RC’s 12AWG Black Silicone Wire offers premium flexibility and durability for clean and reliable wiring. Whether you’re upgrading electronics or building custom charge leads, this wire is a solid go-to choice for RC hobbyists. ✅ 12AWG gauge – reliable current handling✅ Ultra-flexible silicone insulation✅ Low-resistance stranded copper conductor✅ Clean black color for a pro finish✅ Heat-resistant and easy to solder✅ 1 meter (approx. 3.3 feet) 📦 Includes:(1) Meter of Black 12AWG Boof RC Silicone Wire  

Read more less

Boof RC T-Plug Male to EC3 Female Adapter🔌 Quick Conversion. Clean Power. Need to connect a battery with a T-style plug to a device or charger that uses EC3? This compact Boof RC adapter gets the job done without soldering or hassle. Designed with precision and convenience in mind, it’s a must-have for every pit box. ✅ T-Plug (Deans-style) Male to EC3 Female✅ 14AWG silicone wire for dependable current delivery✅ 5cm short lead keeps setup tidy✅ Plug-and-play—no tools needed✅ Great for batteries, chargers, or ESC conversions 📦 Includes:(1) T-Plug Male to EC3 Female Adapter 💡 Boof Tip: Simplify your wiring setup without compromising performance.  

Read more less

Boof RC Adapter – T-Style Plug (Female) to EC3 (Male) with Short Wire Need to connect EC3 batteries to a T-plug setup? This Boof RC adapter features a clean, flexible short-wire design that gets the job done—no soldering needed. ✅ T-Style Female (Deans-type) to EC3 Male✅ Short wire provides flexibility without the bulk✅ Gold-plated connectors for reliable performance✅ Great for charging or running mismatched plug types 🔌 Connector A: T-Style (Female)🔌 Connector B: EC3 (Male)📏 Wire Length: Short (approx. 2–3 inches) 💡 Boof Tip: A handy solution for adapting gear on the fly—keep one in your box and never miss a heat.

Read more less

  Charge with confidence using the Boof RC XT60 to TRX-style charging lead — a reliable connection for your RC power needs. Whether you're juicing up packs on your bench or in the pits, this cable bridges modern XT60 chargers with the classic-style battery plug found on many RTR vehicles. ✅ XT60 female plugs directly into most smart chargers✅ Compatible with legacy "clip-style" battery connectors✅ 12 AWG silicone wire for safe, efficient current flow✅ Heat-shrunk terminals for clean, durable connections✅ Great for backyard bashers and race rigs alike 📏 Length: ~300mm⚡ Wire Gauge: 12 AWG🔌 Connector A: XT60 Female🔌 Connector B: TRX-style Male 💡 Boof Tip: Always double-check polarity and connector fit before plugging in. This lead is built for performance — just like your rig.  

Read more less