Upgrade your RC10B6.3 front-end handling with these Factory Team Steering BlockArms. Featuring a +1mm height and made from lightweight carbon fiber, these HT (High Traction) arms are designed to optimize steering feel and response in high-grip conditions. A must-have for racers looking to fine-tune their setup for maximum performance. 🔥 Key Features: Genuine Team Associated Factory Team upgrade +1mm height for increased front roll center High traction (HT) geometry improves cornering in grippy conditions Constructed from precision-cut carbon fiber Lightweight and durable for competition use ✅ Compatibility: RC10B6.3 RC10B6.3D May fit other RC10B6-series vehicles with similar front-end geometry 📦 Includes: (1) Left Steering Block Arm (1) Right Steering Block Arm ⚠️ Note:Factory Team parts are intended for experienced builders and racers. Always check fitment before installation.

Read more less

Team Associated 13mm Front Shock Spring. These optional springs are intended for the Team Associated B6.4D and the B6.4. Package includes two springs. Effects of Shock Spring Changes  Shock Spring  Characteristic  Softer Increased Chassis Roll Increased Traction Better in Bumpy Conditions More Likely to Bottom Out  Stiffer Decreased Chassis Roll Decreased Traction Increased Responsiveness COMPATIBILITY: Team Associated RC10 B74.2Team Associated RC10 B74.2DTeam Associated RC10B6.4Team Associated RC10B6.4D

Read more less

Team Associated RC10B74.2 Front Gullwing Suspension Arms. This is a replacement intended for the RC10B74.2 and B74.2D series of vehicles. Package includes one left front gullwing suspension arm, one right front gullwing suspension arm and two arm spacers. COMPATIBILITY: Team Associated RC10 B74.2Team Associated RC10 B74.2D

Read more less

  Restore smooth drivetrain performance with the CVA Rebuild Kit from Team Associated. Designed to refresh your constant velocity driveshafts, this kit includes all the necessary components to bring worn CVAs back to peak condition—ensuring efficient power transfer and extended part life. 🔥 Key Features: Complete rebuild set for CVA driveshaft assemblies Helps restore smooth, efficient drivetrain operation Includes cross pins, barrels, and set screws Precision components built to factory specifications Ideal for regular maintenance or post-race refresh ✅ Compatibility: Compatible with a variety of Team Associated CVA-style driveshafts Commonly used in RC10B6, B6.1, B6.2, B6.3, and other AE 1/10 vehicles Check your vehicle’s manual for exact fitment 📦 Includes: (2) Cross Pins (2) Barrels (2) Set Screws ⚠️ Tip:Use thread lock on set screws and inspect parts regularly for wear to prevent drivetrain failure.

Read more less

The Team Associated 2.2" Front Buggy Wheels (White) are optional replacement wheels designed for 1/10 scale buggies using a 12mm hex setup. Built from durable nylon material, these wheels provide a strong yet lightweight solution for competitive racing. Designed for use with the Associated B4 and B4.1 when equipped with a 12mm hex conversion, these wheels offer reliable fitment and consistent performance on a variety of track surfaces. Features Genuine Team Associated optional wheels 2.2" front buggy wheel design 12mm hex fitment Durable white nylon construction Lightweight and race-ready Includes (2) 2.2" Front Buggy Wheels (White) Compatibility Team Associated B4 (with 12mm hex conversion) Team Associated B4.1 (with 12mm hex conversion) A dependable front wheel option built for strength, consistency, and competitive performance. 🏁  

Read more less

Team Associated Rear Suspension Arms: RC10B74   ASC92130

Read more less

  Keep your electronics running cool and consistent with the Reedy Blackbox 510R 30×30×10mm Fan. Designed for high-performance RC applications, this compact, high-airflow fan helps reduce heat buildup under demanding race conditions. Features & Benefits: Compact 30×30×10mm size fits most ESC and motor mounts High-efficiency cooling to maintain peak performance Durable construction for reliable race-day use Includes mounting screws for easy installation What’s Included: Reedy Blackbox 510R fan Mounting hardware A simple, effective upgrade to protect your electronics and keep lap times consistent.  

Read more less

Stronger. Stiffer. Smarter. Push your setup to the next level with the Factory Team Carbon V2 Caster & Steering Blocks Set, designed for the RC10T7 and RC10SC7 platforms. Crafted from Team Associated’s legendary carbon composite material, this high-performance upgrade delivers exceptional rigidity, reduced flex, and race-winning precision for serious competitors. Factory Team Engineering Developed by Team Associated’s Factory Team division, these Carbon V2 Caster & Steering Blocks are built for racers who demand consistent steering feel and maximum durability under pressure. The improved carbon design minimizes deflection for more accurate cornering response and improved high-speed stability, giving you total control lap after lap. Features: Constructed from AE carbon composite material for maximum strength and precision Increased rigidity reduces unwanted flex under load Enhanced durability for high-stress racing environments Improved handling consistency and cornering feedback Factory Team quality ensures perfect fit and race-ready reliability Includes: (1) Front Factory Team Carbon V2 Caster & Steering Blocks Set Compatibility: Team Associated RC10 SC7 Team Associated RC10 T7 Team Associated Factory Team — Engineered to Win.

Read more less

Team Associated RC10B6.4 -1mm Scrub Caster & Steering Blocks (Carbon) [91985] 🛠️ Precision Meets Performance 💨 Upgrade your front end with this Carbon -1mm Scrub Caster & Steering Block Set for the RC10B6.4 and B6.4D. Built for racers who want rigidity, adjustability, and the ultimate in high-traction control. Carbon construction = serious stiffness. 🔥 ✅ Rigid carbon for a more responsive suspension✅ Includes multiple caster insert options for fine-tuning✅ -1mm scrub radius for quicker steering feel✅ Built for B6.4 / B6.4D platforms Includes:(2) Carbon Caster Blocks(4) Carbon Steering Blocks(2) +/- 0° Caster Inserts(2) +/- 2.5° Caster Inserts(2) +/- 5° Caster Inserts(2) Shims 📦 Part Number: 91985🚗 Brand: Team Associated

Read more less

Team Associated RC10B7 FT Ballstud Mount, Black Aluminum – ASC92478 Factory-Precision Suspension Mount for the RC10B7 The Factory Team Standard Height Ballstud Mount is a durable, performance-focused upgrade for your RC10B7 platform. Crafted from CNC-machined aluminum and finished in stealth black, it delivers consistent rear camber link geometry with improved strength and tuning potential. ⚙️ Features: ✅ Standard Height – Maintains factory camber link geometry ✅ CNC-Machined Aluminum – Lightweight and built to last ✅ Black Anodized Finish – Sleek and stealthy Factory Team look ✅ Reliable Upgrade – Improves rear-end durability and tuning flexibility 📦 Includes: (1) Black Aluminum Ballstud Mount (Standard Height) Mounting hardware ✅ Compatibility: Team Associated RC10B7 Team Associated RC10B7 🏁 A must-have for racers seeking durable, factory-style performance with a sleek, blacked-out look.

Read more less

Team Associated RC10B7 FT Ballstud Mount +2mm, Blue Aluminum – ASC92477 Precision Suspension Tuning for the RC10B7 The Factory Team +2mm Ballstud Mount is a premium upgrade for serious racers. Machined from lightweight aluminum and anodized in signature blue, this mount allows for fine-tuning of rear camber link geometry, improving handling and cornering stability on the track. ⚙️ Features: ✅ +2mm Height – Raises rear camber link mount for improved roll center adjustment ✅ CNC-Machined Aluminum – Durable and lightweight ✅ Blue Anodized Finish – Factory Team look and corrosion resistance ✅ Increased Setup Options – Perfect for dialing in rear-end grip and handling on high-traction surfaces 📦 Includes: (1) +2mm Blue Aluminum Ballstud Mount Mounting hardware ✅ Compatibility: Team Associated RC10B7 Team Associated RC10B7D 🏁 Ideal for racers looking to fine-tune rear suspension geometry for high-performance setups.

Read more less

Team Associated RC10B7 FT Rear Hub Set, HRC, Blue or Black – 92473 / 92474Upgrade your RC10B7 with Factory Team aluminum HRC rear hubs – engineered for strength, precision, and tunability on high-grip tracks. These anodized blue or black hubs feature a high roll center (HRC) design to enhance handling, increased axle height adjustability, and a secondary bearing bore for use with FT universals. Built tough for serious racers who want consistency lap after lap. ✔️ CNC Aluminum for max durability✔️ HRC Design boosts handling on high-traction surfaces✔️ Supports higher axle heights and lower ride heights✔️ Compatible with Factory Team Universals✔️ Anodized in Blue (92473) or Black (92474)✔️ Includes left & right hubs plus mounting hardware✔️ Fits: RC10B7 & RC10B7D Race harder. Corner faster. Stay planted. 🏁  

Read more less

Team Associated FT 3x27.5mm V2 Chrome Shock Shafts – ASC91620 Smooth, Durable, Factory-Grade Suspension Parts Upgrade or replace your V2 shocks with the Factory Team 3x27.5mm Chrome Shock Shafts, engineered for exceptional performance and longevity. Designed specifically for #91577 buggy rear and #91578 truck front shock bodies, these shafts provide a precise fit with a low-friction chrome finish. ⚙️ Features: ✅ Chrome-coated for reduced stiction and increased durability ✅ Designed for secure screw-mounted piston setup ✅ Factory Team precision for consistent shock action ✅ Ideal for competitive racing environments 📦 Includes: (2) 3x27.5mm V2 Chrome Shock Shafts ✅ Compatibility: #91577 – Buggy Rear Shock Bodies #91578 – Truck Front Shock Bodies Not compatible with E-clip piston systems 🏁 Factory Team quality that keeps your ride smooth and race-ready!

Read more less

Overview:Boost suspension precision and durability with the Team Associated RC10B7 Aluminum Arm Mount "C Block". CNC-machined from high-quality aluminum, this upgrade improves rigidity in the rear suspension, keeping hinge pins aligned under extreme racing loads. With its blue anodized finish and Factory Team quality, it’s a reliable upgrade over the stock composite mount for racers who demand consistency and strength. Features: Precision CNC-machined aluminum construction Stronger and more rigid than stock composite mounts Maintains accurate hinge pin alignment for consistent suspension geometry Blue anodized finish with Factory Team looks Genuine Team Associated Factory Team upgrade Compatibility: Team Associated RC10B7 1/10 2WD Buggy May also fit other B7-based platforms (verify with manual) Includes: (1) Aluminum Arm Mount "C Block" Part Number: 92432 ⚡ Pro Tip: Pair the Aluminum "C Block" with the Aluminum "D Block" (92433) for a fully reinforced rear suspension setup that maintains geometry through the toughest conditions.

Read more less

Team Associated RC10B7 Factory Team Carbon Side Rails. Constructed from AE legendary carbon composite material, these optional side rails are intended for the Team Associated RC10B7 1/10 buggy to stiffen the chassis and eliminate flex as a tuning option for high bite surfaces. Package includes two side rails. COMPATIBILITY: Team Associated RC10 B7 OriginalTeam Associated RC10 B7D

Read more less

Team Associated RC10B7 Factory Team Aluminum Front Bulkhead (0°) Stronger. Straighter. Smarter. Upgrade your RC10B7’s durability and precision with the Factory Team Aluminum Front Bulkhead. Machined from high-quality aluminum with a zero-degree angle for optimal front-end geometry, this bulkhead is designed to withstand the rigors of competitive 1/10-scale racing. 🔧 Features: ✅ Factory Team Precision: CNC-machined aluminum for a tight, accurate fit ✅ Zero-Degree Angle: Delivers neutral front kick-up geometry ✅ Reinforced Design: Built to handle hard landings and aggressive racing ✅ Includes Set Screws: Complete package for quick installation 📦 Includes: (1) Aluminum Front Bulkhead (0°) (4) Set Screws 🔩 Compatibility: Team Associated RC10 B7 Team Associated RC10 B7D 💪 Built for racers who demand strength and precision at the front end.🛞 Factory Team quality — because your buggy deserves the best.

Read more less

Team Associated Factory Team Carbon Front Gearboxes – RC10B74.2 Tunable Front-End Performance for Changing Track Conditions Unlock precise handling with the Factory Team Carbon Front Gearboxes for the RC10B74.2 and RC10B74.2D. This lightweight carbon-reinforced gearbox set offers both standard and +2mm ride height options, giving racers ultimate flexibility in front-end tuning for varying surfaces and setups. 🔩 Features: 🧱 Lightweight carbon composite material 📏 Includes both standard and +2mm height gearboxes 🔧 Covers included for both gearbox housings 🌀 Comes with sway bar bracket for fine handling adjustments 📦 Includes: (1) Standard Height Front Gearbox w/ Cover (1) +2mm Front Gearbox w/ Cover (1) Sway Bar Bracket ✅ Compatibility: Team Associated RC10B74.2 Team Associated RC10B74.2D 🎯 Optimize your front-end geometry for maximum track performance.

Read more less

Upgrade your RC10B74 buggy with the Factory Team Carbon Rear Suspension Arms from Team Associated. These arms are crafted from lightweight and ultra-rigid carbon composite material, giving racers the precision, consistency, and responsiveness needed to compete at the highest levels. 📌 Key Features: Factory Team carbon construction for reduced weight and added stiffness Increased responsiveness and reduced flex under load Designed for competitive high-traction racing conditions Direct replacement for stock rear suspension arms 📦 Includes: (2) Carbon rear suspension arms (Left and Right) ✅ Compatibility: RC10B74 RC10B74.1 RC10B74.2 Engineered for racers who demand performance and reliability on the track.

Read more less

This is a replacement Team Associated RC10B74 Hinge Pin Set. 

Read more less

Team Associated RC10B74 Factory Team LTC Metal Differential Rebuild Set. This is an optional part intended for the B74 series of buggies. Includes: (2) Differential side gears (4) Differential Spider gears (2) Outdrive shims (4) Spider gear shims COMPATIBILITY: Team Associated RC10 B74 OriginalTeam Associated RC10 B74.1Team Associated RC10 B74.1DTeam Associated RC10 B74.2Team Associated RC10 B74.2D

Read more less

Upgrade or replace your worn-out steering components with this genuine Team Associated RC10B74 Steering Bellcranks set. Designed specifically for the B74 platform, these bellcranks are precision-engineered to deliver smooth, accurate steering response on any track. 🔩 Key Features: Genuine Team Associated Factory Team parts Maintains optimal steering geometry Molded composite construction for lightweight durability Perfect fit for high-performance competition builds 📦 Includes: (1) Left Steering Bellcrank (1) Right Steering Bellcrank ✅ Compatibility: Team Associated RC10B74 May also fit other RC10B74-series variants Keep your steering system race-ready with fresh bellcranks designed to meet Factory Team standards.

Read more less

Team Associated RC10B74.1 Anti-Roll Bar Set (1.4–1.7mm) – 92290📏 Dial In Your Roll Game! Fine-tune your handling like a pro with this optional anti-roll bar set for your RC10B74.1 or B74.1D. Whether you're dialing in for high-bite tracks or looking for more stability in the corners, this set gives you the range you need to dominate. 💪 Key Benefits:✅ Includes 1.4, 1.5, 1.6, and 1.7mm sway bars✅ Smoother cornering and better chassis balance✅ Essential tuning option for competitive 4WD racers✅ Designed to fit the RC10B74.1 and B74.1D platforms 🔧 Includes:• (1) 1.4mm Sway Bar• (1) 1.5mm Sway Bar• (1) 1.6mm Sway Bar• (1) 1.7mm Sway Bar 📦 Part Number: 92290🏁 Brand: Team Associated  

Read more less

Team Associated Rear CVA Axle – 66mm (RC10B74) Restore or upgrade your B74 drivetrain. The ASC92207 66mm Rear CVA Axle is a precision-engineered replacement part designed specifically for the Team Associated RC10B74. Whether you're maintaining performance or rebuilding after wear, this axle ensures smooth power delivery and durability for competitive 1/10 4WD off-road racing. ⚙️ Features: 🛞 66mm length optimized for rear CVA driveshaft assemblies 🧰 Direct replacement for factory parts 💪 Hardened for strength and longevity under racing conditions 📦 Includes: (1) 66mm Rear CVA Axle ✅ Compatibility: Team Associated RC10 B74 Keep your B74 running smooth and race-ready with genuine Team Associated drivetrain components.

Read more less

The Team Associated RC10T7 and RC10SC7 Rear Suspension Arms are genuine replacement components designed to restore proper suspension performance and durability. Manufactured to factory specifications, these rear arms ensure correct geometry, strength, and consistent handling for your T7 or SC7 platform. Perfect for routine maintenance, race-day repairs, or keeping a spare set in your pit box. Features Genuine Team Associated replacement parts Factory-fit rear suspension arms Maintains proper suspension geometry Durable construction for racing conditions Includes (2) RC10T7 / RC10SC7 Rear Suspension Arms Compatibility Team Associated RC10 SC7 Team Associated RC10 T7 A dependable replacement set to keep your suspension tight, consistent, and race-ready. 🏁  

Read more less

The Team Associated Factory Team Carbon Front Suspension Arms for the RC10T7 and RC10SC7 are a high-performance upgrade designed to increase rigidity and improve suspension consistency under demanding racing conditions. Built using AE’s legendary carbon composite material, these arms reduce flex found in standard suspension components, resulting in more precise handling and predictable performance on the track. Engineered as part of the Factory Team lineup, these arms deliver race-proven strength and durability while maintaining perfect fit and compatibility with the RC10T7 and RC10SC7 platforms. Features Factory Team carbon composite construction Increased rigidity for improved suspension response Reduces flex compared to stock arms Enhances durability and strength Improves handling consistency during high-stress driving Direct-fit Factory Team upgrade Includes (2) Factory Team Carbon Front Suspension Arms Compatibility Team Associated RC10T7 Team Associated RC10SC7 A race-ready suspension upgrade designed for drivers looking for improved precision, durability, and consistency on the track. 🏁

Read more less

Fine-Tune Your Handling. Maximize Your Grip. Unlock next-level stability with the Team Associated RC10T7/RC10SC7 Rear Anti-Roll Sway Bar Set — the go-to tuning upgrade for racers who demand consistency, balance, and improved cornering on any surface. Whether you're on tight indoor carpet, loose dirt, or bumpy outdoor tracks, this sway bar set helps control chassis roll to keep your truck flatter, more predictable, and faster through every section. About the Sway Bar Set Precision Tuning Made Easy Designed specifically for the RC10T7 and RC10SC7 platforms, this rear sway bar set gives you multiple bar thicknesses to fine-tune how much the rear end stays planted.More resistance = more stability.Less resistance = more rotation.Choose the perfect feel for your track and driving style. A must-have item for racers looking to get the most out of the Team Associated 1/10 4x4 trucks. Features Three sway bar sizes for precise tuning Reduces chassis roll for improved consistency Increases cornering balance and steering predictability Works on tight, loose, and bumpy tracks Perfect for any racer’s tuning bag Direct fit for RC10SC7 and RC10T7 platforms Includes (1) Rear Sway Bar Set (multiple bar thicknesses)

Read more less

🔧 Strong, Precise, Race-ReadyThe Team Associated RC10B84 Front Suspension Arms are precision-molded replacement components built to handle the rigors of competitive racing. Designed specifically for the B84 platform, these arms deliver the perfect balance of strength, flexibility, and lightweight performance to maintain consistent handling and durability under extreme conditions. ⚙️ Features: ✅ Direct fit replacement for RC10B84 ✅ Molded composite construction for durability and controlled flex ✅ Maintains proper suspension geometry for predictable handling ✅ Perfect for racers needing fresh arms or spares 📦 Includes: (1) Pair of Front Suspension Arms  

Read more less

🏆 Stronger, Straighter, FasterThe “A” Arm Mount for the RC10B84 is a precision CNC-machined aluminum upgrade that replaces the stock plastic piece. Built to handle the toughest racing conditions, this mount locks in suspension geometry for consistent camber and toe, helping your buggy track straighter and corner sharper. ⚙️ Features: ✅ CNC-machined aluminum for superior durability ✅ Precision hinge-pin alignment ensures consistent suspension setup ✅ Anodized finish resists wear and adds a pro look ✅ Direct replacement for the stock “A” mount 📦 Includes: (1) RC10B84 “A” Arm Mount 💡 Pro Tip: Combine the A, B, and C aluminum arm mounts for a fully upgraded rear suspension package — maximizing both strength and precision.  

Read more less

Team Associated RC10B7 Factory Team Steel Servo Weight Plate (16g) – Heavyweight Tuning Precision! ⚙️ Need more front-end grip or balance on high-bite surfaces? Add serious weight where it counts with the Team Associated Factory Team Steel Servo Weight Plate. Designed specifically for the RC10B7 and RC10B7D, this optional upgrade adds 16 grams of concentrated weight under the servo to fine-tune your buggy's weight bias and handling response 🔧 Key Features: ✅ Heavy-duty steel construction – strong and reliable✅ Adds 16g of tuning weight right at the servo✅ Ideal for balancing steering response and front traction✅ Precision fit for the RC10B7 and RC10B7D✅ Factory Team quality and finish 📦 Includes: (1) 16g Steel Servo Weight Plate ✅ Compatibility: Team Associated RC10B7 Team Associated RC10B7D 🎯 Fine-tune like the pros and get your setup dialed in — one gram at a time.Upgrade to the Factory Team Steel Servo Weight Plate and take control of your setup! 🏁    

Read more less

The Team Associated 92417 Rear Wing & Body Mounts Set is a direct replacement designed for the RC10B7 1/10-scale buggy platform. This set restores proper rear wing positioning and body mounting alignment, making it ideal for repairs, rebuilds, or keeping race-day spares on hand. Manufactured to factory specifications for precise fit and durability. 🔧 Features Genuine Team Associated replacement parts Direct-fit rear wing and body mounts Maintains proper wing height and body positioning Ideal for maintenance, rebuilds, or race prep 📦 Includes (1) Rear Wing Mount (2) Rear Body Mounts ✅ Compatibility Team Associated RC10 B7 (Original) Team Associated RC10 B7D

Read more less

Team Associated B6.1/B6.1D Rear Ballstud Mount (91775) Upgrade your suspension adjustability with the Team Associated B6.1/B6.1D Rear Ballstud Mount. This precision-machined part provides a secure mounting point for your rear camber links, allowing for fine-tuned handling and performance. Features: Precision-machined for accurate fit and alignment Provides stable mounting for rear camber link adjustments Durable construction for long-lasting performance Direct replacement for the stock rear ballstud mount Compatibility: Team Associated B6.1 Team Associated B6.1D Includes: (1) Rear Ballstud Mount Perfect for restoring or upgrading your buggy’s rear suspension geometry and tuning options.

Read more less

Team Associated 13mm Front Shock Spring. These optional springs are intended for the Team Associated B6.4D and the B6.4. Package includes two springs. Effects of Shock Spring Changes  Shock Spring  Characteristic  Softer Increased Chassis Roll Increased Traction Better in Bumpy Conditions More Likely to Bottom Out  Stiffer Decreased Chassis Roll Decreased Traction Increased Responsiveness COMPATIBILITY: Team Associated RC10 B74.2Team Associated RC10 B74.2DTeam Associated RC10B6.4Team Associated RC10B6.4D

Read more less

Team Associated 13mm Rear Shock Spring. These optional springs are intended for the Team Associated B6.4D and the B6.4. Package includes two springs. Effects of Shock Spring Changes  Shock Spring  Characteristic  Softer Increased Chassis Roll Increased Traction Better in Bumpy Conditions More Likely to Bottom Out  Stiffer Decreased Chassis Roll Decreased Traction Increased Responsiveness COMPATIBILITY: Team Associated RC10 B74.2Team Associated RC10 B74.2DTeam Associated RC10B6.4Team Associated RC10B6.4D

Read more less

Team Associated RC10B74.2 0 and 2mm Front Gearboxes. This is a replacement intended for the RC10B74.2 and B74.2D series of vehicles. Package includes one 0mm height front differential gearbox with cover and one 2mm height front differential gearbox with cover. COMPATIBILITY: Team Associated RC10 B74.2Team Associated RC10 B74.2D

Read more less

  Keep your battery secure and your buggy race-ready with the Team Associated B6 Battery Strap. Designed as a direct replacement part, this strap ensures a snug fit and reliable hold for your battery pack during the most demanding runs. ✅ Direct Replacement – Fits RC10 B6 and B6D buggies✅ Secure Fit – Keeps your battery firmly in place✅ Complete Package – Includes strap, nuts, and hardware Includes: (1) Battery Strap (2) Battery Strap Nuts (Hardware Set) Compatibility: Team Associated RC10 B6 Team Associated RC10 B6D

Read more less

  Keep your wing secure and your rear-end planted with the Team Associated RC10B74 Rear Wing Mount. Designed specifically for the RC10B74 series, this durable wing mount ensures consistent downforce and stability under high-speed cornering and heavy landings. 🔧 Key Features: Durable composite construction Factory Team design and fit Securely mounts the rear wing for improved aerodynamics Lightweight yet strong for competitive racing Direct replacement for stock part 📦 Includes: (1) Rear Wing Mount Assembly ✅ Compatibility: Team Associated RC10B74 May fit other RC10B74-series vehicles (confirm in your manual) Enhance your rear grip and keep your wing locked down with this reliable Factory Team upgrade.

Read more less