Team Associated RC10B74.1 Anti-Roll Bar Set (1.4–1.7mm) – 92290📏 Dial In Your Roll Game! Fine-tune your handling like a pro with this optional anti-roll bar set for your RC10B74.1 or B74.1D. Whether you're dialing in for high-bite tracks or looking for more stability in the corners, this set gives you the range you need to dominate. 💪 Key Benefits:✅ Includes 1.4, 1.5, 1.6, and 1.7mm sway bars✅ Smoother cornering and better chassis balance✅ Essential tuning option for competitive 4WD racers✅ Designed to fit the RC10B74.1 and B74.1D platforms 🔧 Includes:• (1) 1.4mm Sway Bar• (1) 1.5mm Sway Bar• (1) 1.6mm Sway Bar• (1) 1.7mm Sway Bar 📦 Part Number: 92290🏁 Brand: Team Associated  

Read more less

Team Associated Rear Suspension Arms, Hard: RC10B74   ASC92131

Read more less

Team Associated RC10B7 Caster Block Link Mounts (+0mm) (2) [92467] 🛠️ Dial in your RC10B7 with Factory-Grade Precision!Swap in the Team Associated RC10B7 Carbon Fiber Caster Block Link Mounts for ultra-precise handling and durability where it counts. Made from tough carbon fiber and engineered to spec, these +0mm mounts are a must-have replacement or upgrade for racers chasing podium consistency. 🔧 Key Features:✅ +0mm geometry for a stock setup and consistent steering💪 Made from lightweight, high-strength carbon fiber🚗 Direct fit for the RC10B7—no guesswork, no fuss🔄 Perfect as spares or performance replacements 📦 Includes:(2) Carbon Fiber Caster Block Link Mounts (+0mm) 🔩 Part Number: 92467🏁 Fits: Team Associated RC10B7 1/10 Buggy

Read more less

Team Associated RC10B7 Gear Differential Set – Reliable Power Transfer for the Track! ⚙️ Keep your buggy’s drivetrain running smooth and efficient with the Team Associated RC10B7 Gear Differential Set!Designed as a direct replacement for the RC10B7 and RC10B7D, this factory gear diff delivers durability, consistent performance, and easy maintenance — essential for serious racers. ✨ Key Features: ⚙️ Complete Factory Replacement Gear Differential – Designed specifically for peak performance with the RC10B7 and B7D 🛠️ Durable Construction – Built to withstand the demands of 1/10 off-road racing 🏁 Smooth and Reliable Power Delivery – Maintains consistent handling and traction under race conditions 🔧 Easy to Service – Designed for fast rebuilding and tuning between heats 📦 Includes: ✔ (1) Complete RC10B7 Gear Differential Set 📦 Compatibility: ✅ Team Associated RC10B7 ✅ Team Associated RC10B7D 📌 Note: 🔹 Differential fluid is not included and must be purchased separately.🔹 Check your manual for recommended fluid weight based on track conditions. 🏁 Maintain your competitive edge with a fresh RC10B7 Gear Differential Set! 🔥 Upgrade today and ensure maximum performance and reliability from your Team Associated buggy! 🔥

Read more less

Overview:Boost suspension precision and durability with the Team Associated RC10B7 Aluminum Arm Mount "C Block". CNC-machined from high-quality aluminum, this upgrade improves rigidity in the rear suspension, keeping hinge pins aligned under extreme racing loads. With its blue anodized finish and Factory Team quality, it’s a reliable upgrade over the stock composite mount for racers who demand consistency and strength. Features: Precision CNC-machined aluminum construction Stronger and more rigid than stock composite mounts Maintains accurate hinge pin alignment for consistent suspension geometry Blue anodized finish with Factory Team looks Genuine Team Associated Factory Team upgrade Compatibility: Team Associated RC10B7 1/10 2WD Buggy May also fit other B7-based platforms (verify with manual) Includes: (1) Aluminum Arm Mount "C Block" Part Number: 92432 ⚡ Pro Tip: Pair the Aluminum "C Block" with the Aluminum "D Block" (92433) for a fully reinforced rear suspension setup that maintains geometry through the toughest conditions.

Read more less

Team Associated RC10B7 Rear Anti-Roll Sway Bars (5) [92458] 🌀 Keep It Tight in the Turns!Fine-tune your cornering performance with the Team Associated RC10B7 Rear Anti-Roll Sway Bar Set. Whether you’re dialing in for grip or freeing up the rear, this 5-pack gives you options to match any track condition. Made specifically for the RC10B7 and B7D platforms, these bars are a must-have in any serious racer’s pit box. 🔧 Key Features:✅ Includes five different sway bar thicknesses🚗 Designed for the RC10B7 and B7D buggies🔄 Helps balance your setup for optimal rear-end control🏁 Swap in and tune for different track surfaces 📦 Includes:(5) Rear Anti-Roll Sway Bars 🔩 Part Number: 92458🛠️ Compatible With: Team Associated RC10 B7 Team Associated RC10 B7D

Read more less

Upgrade your suspension precision with the Factory Team 13mm Shock Pistons from Team Associated. The #91932 piston set features two 1.6mm holes with a 2.5mm thickness, providing a stiffer pack than larger hole configurations—ideal for high-speed, high-traction conditions. 📦 Includes: (2) FT 13mm Shock Pistons – 2x1.6mm holes 2.5mm thick profile ⚙️ Key Features: Designed for 13mm shock bodies Precision-molded for consistency and smooth operation Offers increased damping over 2x1.7 and 2x1.8 setups Used by top racers for fine-tuning on rough or fast tracks Fits platforms like RC10B6.4, RC10B74.2, and more 📌 Tuning Note: Smaller holes = more pack. Great for front shocks when you want the car to stay flatter in transitions or landings.

Read more less

Upgrade your rear-end setup with precision and strength! This wide gull-wing carbon fiber rear shock tower is designed to optimize shock positioning for increased stability and rear traction, especially in high-bite track conditions. A direct replacement part for B6.3 and B6.3D platforms, it’s lightweight, ultra-durable, and race-proven. ✅ Key Features: High-quality carbon fiber construction for superior strength and reduced flex Wide gull-wing geometry enhances suspension performance and tuning range Lightweight upgrade with professional-level reliability Direct replacement with factory fit and finish 📦 Includes: (1) Carbon Fiber Wide Gull-Wing Rear Shock Tower 🔧 Compatibility: Team Associated RC10B6.3 Team Associated RC10B6.3D Pair it with the front gull-wing tower (#91880) for maximum performance and chassis balance.

Read more less

Upgrade your RC10B74 buggy with the Factory Team Carbon Rear Suspension Arms from Team Associated. These arms are crafted from lightweight and ultra-rigid carbon composite material, giving racers the precision, consistency, and responsiveness needed to compete at the highest levels. 📌 Key Features: Factory Team carbon construction for reduced weight and added stiffness Increased responsiveness and reduced flex under load Designed for competitive high-traction racing conditions Direct replacement for stock rear suspension arms 📦 Includes: (2) Carbon rear suspension arms (Left and Right) ✅ Compatibility: RC10B74 RC10B74.1 RC10B74.2 Engineered for racers who demand performance and reliability on the track.

Read more less

Team Associated RC10B74.2 Front Gullwing Suspension Arms. This is a replacement intended for the RC10B74.2 and B74.2D series of vehicles. Package includes one left front gullwing suspension arm, one right front gullwing suspension arm and two arm spacers. COMPATIBILITY: Team Associated RC10 B74.2Team Associated RC10 B74.2D

Read more less

Upgrade or replace your worn-out steering components with this genuine Team Associated RC10B74 Steering Bellcranks set. Designed specifically for the B74 platform, these bellcranks are precision-engineered to deliver smooth, accurate steering response on any track. 🔩 Key Features: Genuine Team Associated Factory Team parts Maintains optimal steering geometry Molded composite construction for lightweight durability Perfect fit for high-performance competition builds 📦 Includes: (1) Left Steering Bellcrank (1) Right Steering Bellcrank ✅ Compatibility: Team Associated RC10B74 May also fit other RC10B74-series variants Keep your steering system race-ready with fresh bellcranks designed to meet Factory Team standards.

Read more less

Fine-tune your rear suspension geometry with the RC10B74 Rear Hub Insert Set from Team Associated. These precision-molded inserts allow you to customize hub adjustments for optimized handling on a variety of track surfaces. 🔧 Key Features: Factory Team precision for pro-level tuning Multiple offset options for customized camber and toe settings High-quality molded composite for durability Direct fit for RC10B74 rear hubs Ideal for racers seeking performance edge 📦 Includes: (1) Set of Rear Hub Inserts (multiple offsets) ✅ Compatibility: Team Associated RC10B74 May fit other models in the B74 lineup (check manual for fitment) Whether you're tuning for more cornering grip or better straight-line stability, this insert set gives you the flexibility you need to dial in your setup.

Read more less

Team Associated 20mm Aluminum Clamping Servo Horn – 25T (Futaba/Savox/ProTek) – Part 1368Smooth Response. Secure Fit. Built to Perform. The Team Associated 20mm Aluminum Clamping Servo Horn (1368) is crafted from 7075 T6 aluminum for strength and precision. Designed for 25T spline servos (Futaba, Savox, ProTek, and others), this horn features a secure clamping design and a 20mm length that delivers smoother, more controlled steering input—ideal for 1/10 scale touring cars and competition setups. ✅ 7075 T6 aluminum construction – lightweight and incredibly strong✅ 20mm length – delivers smoother, more progressive steering feel✅ Clamping design – prevents spline slop and servo damage✅ Laser-etched spline size – easy, accurate identification✅ Compatible with Futaba, Savox, ProTek (25T spline)✅ Includes large M2.5 screw for secure clamp fit 📦 Includes: (1) 20mm Aluminum Clamping Servo Horn (25T) (1) M2.5 Clamp Screw Part #: 1368 💡 Pro Tip: Always torque the clamp screw securely to lock in performance and reduce servo spline wear.

Read more less

Upgrade your 13mm shocks with these Factory Team precision pistons from Team Associated. The #91934 2x1.8mm shock pistons are designed with a 2.5mm thickness for added tuning flexibility and smoother damping response—perfect for racers fine-tuning their suspension on high-traction surfaces.📦 Includes: (2) FT 13mm Shock Pistons – 2x1.8mm hole layout 2.5mm thick ⚙️ Key Features: CNC-machined precision for consistent performance 13mm piston design fits Team Associated’s latest shocks Ideal for carpet, astro, or high-grip clay tracks Designed for RC10B6.4, RC10B74.2, and other AE vehicles using 13mm shocks 📌 Tuning Tip: Smaller holes (1.8mm) and thicker pistons increase pack and slow down shock speed, which is great for improved control on high-traction tracks or smoother landings. Let me know if you'd like a matching version for other piston sizes or to bundle with 13mm shock sets!

Read more less

Team Associated RC10B6.4 / B7 Steering Hat Bushing Set – ASC91974Upgrade or replace worn bushings with this genuine Team Associated Steering Hat Bushing Set. Originally designed for the RC10B6.4 and B6.4D, this set is also compatible with the RC10B7 series. Perfect for keeping your steering smooth and precise, this pack includes four bushings – just what you need to tighten up your front end feel. ✅ Fits: RC10B6.4 RC10B6.4D RC10B7 RC10B7D 📦 Includes: (4) Steering Hat Bushings OEM Part #: ASC91974

Read more less

Keep your suspension dialed in with these M3x48mm steel turnbuckles from Team Associated. Designed for strength and precision, they’re a direct replacement for worn or bent camber or steering links on a variety of Team Associated vehicles. 🔥 Key Features: High-strength steel construction for durability M3 thread with a 48mm (1.89") length Ideal for use in suspension and steering linkages Precision-machined threads for secure fit and adjustability Standard AE turnbuckle design for easy setup ✅ Compatibility: RC10B6 / B6.1 / B6.2 / B6.3 series (various locations) SC6.1 / T6.1 / T6.2 May also fit other models requiring M3x48mm turnbuckles — check your manual for fitment 📦 Includes: (2) M3 x 48mm Turnbuckles (1.89") ⚠️ Note:For proper installation, use a 3mm turnbuckle wrench and thread into ballcups evenly to maintain symmetry and alignment.

Read more less

Team Associated RC10B74.2 FT Chassis Protective Sheet. This is an optional chassis protective sheet intended to fit the Team Associated RC10B74.2 buggy. Using high quality adhesive backed vinyl, Team Associated has created a durable protective surface that not only is functional but looks great! Printed on the sheet is an accurate depiction of the B74.2 drivetrain layout, providing an "X-Ray" style look to the bottom of your vehicle. Package includes one main chassis protection sheet and three tail pieces giving you two extras.   COMPATIBILITY: Team Associated RC10 B74.2Team Associated RC10 B74.2D

Read more less

Upgrade your RC10B6.3 front-end handling with these Factory Team Steering BlockArms. Featuring a +1mm height and made from lightweight carbon fiber, these HT (High Traction) arms are designed to optimize steering feel and response in high-grip conditions. A must-have for racers looking to fine-tune their setup for maximum performance. 🔥 Key Features: Genuine Team Associated Factory Team upgrade +1mm height for increased front roll center High traction (HT) geometry improves cornering in grippy conditions Constructed from precision-cut carbon fiber Lightweight and durable for competition use ✅ Compatibility: RC10B6.3 RC10B6.3D May fit other RC10B6-series vehicles with similar front-end geometry 📦 Includes: (1) Left Steering Block Arm (1) Right Steering Block Arm ⚠️ Note:Factory Team parts are intended for experienced builders and racers. Always check fitment before installation.

Read more less

Team Associated Factory Team Carbon Front Gearboxes – RC10B74.2 Tunable Front-End Performance for Changing Track Conditions Unlock precise handling with the Factory Team Carbon Front Gearboxes for the RC10B74.2 and RC10B74.2D. This lightweight carbon-reinforced gearbox set offers both standard and +2mm ride height options, giving racers ultimate flexibility in front-end tuning for varying surfaces and setups. 🔩 Features: 🧱 Lightweight carbon composite material 📏 Includes both standard and +2mm height gearboxes 🔧 Covers included for both gearbox housings 🌀 Comes with sway bar bracket for fine handling adjustments 📦 Includes: (1) Standard Height Front Gearbox w/ Cover (1) +2mm Front Gearbox w/ Cover (1) Sway Bar Bracket ✅ Compatibility: Team Associated RC10B74.2 Team Associated RC10B74.2D 🎯 Optimize your front-end geometry for maximum track performance.

Read more less

Team Associated RC10B74 74mm CVA Bones (2) – Part 92193Smooth Power Transfer. Factory Replacement. The Team Associated RC10B74 74mm CVA Bones (92193) are direct replacement parts designed specifically for the RC10B74 platform. These precision-machined CVA bones are built to handle the rigors of racing, offering consistent drivetrain performance and durability. ✅ Designed for the Team Associated RC10B74✅ Precision-machined for smooth drivetrain engagement✅ Durable construction for long-lasting performance✅ OEM replacement – fits just like the original✅ Ideal for spares or fresh builds 📦 Includes: (2) 74mm CVA Bones Part #: 92193 💡 Pro Tip: Regular inspection and replacement of CVA components can help prevent drivetrain wear and unexpected failures on race day.  

Read more less

Team Associated RC10B74.2 0 and 2mm Front Gearboxes. This is a replacement intended for the RC10B74.2 and B74.2D series of vehicles. Package includes one 0mm height front differential gearbox with cover and one 2mm height front differential gearbox with cover. COMPATIBILITY: Team Associated RC10 B74.2Team Associated RC10 B74.2D

Read more less

Team Associated RC10B74 Factory Team LTC Metal Differential Rebuild Set. This is an optional part intended for the B74 series of buggies. Includes: (2) Differential side gears (4) Differential Spider gears (2) Outdrive shims (4) Spider gear shims COMPATIBILITY: Team Associated RC10 B74 OriginalTeam Associated RC10 B74.1Team Associated RC10 B74.1DTeam Associated RC10 B74.2Team Associated RC10 B74.2D

Read more less

Ensure your suspension performs smoothly and consistently with this genuine RC10B74 Shock Bushing Set from Team Associated. These 10mm shock bushings are designed to provide a precise fit for your RC10B74 shocks, reducing slop and maintaining proper alignment under racing conditions. 🔧 Key Features: Genuine Team Associated factory parts Precision molded 10mm shock bushings Reduces wear and slop in shock mounting Designed for a secure fit and smooth suspension movement 📦 Includes: (4) 10mm Shock Bushings ✅ Compatibility: RC10B74 May also be compatible with other RC10B74 series vehicles Keep your suspension dialed and race-ready—replace worn bushings with this official upgrade from Team Associated.

Read more less

  Restore smooth drivetrain performance with the CVA Rebuild Kit from Team Associated. Designed to refresh your constant velocity driveshafts, this kit includes all the necessary components to bring worn CVAs back to peak condition—ensuring efficient power transfer and extended part life. 🔥 Key Features: Complete rebuild set for CVA driveshaft assemblies Helps restore smooth, efficient drivetrain operation Includes cross pins, barrels, and set screws Precision components built to factory specifications Ideal for regular maintenance or post-race refresh ✅ Compatibility: Compatible with a variety of Team Associated CVA-style driveshafts Commonly used in RC10B6, B6.1, B6.2, B6.3, and other AE 1/10 vehicles Check your vehicle’s manual for exact fitment 📦 Includes: (2) Cross Pins (2) Barrels (2) Set Screws ⚠️ Tip:Use thread lock on set screws and inspect parts regularly for wear to prevent drivetrain failure.

Read more less

  Team Associated 3x24mm V2 Chrome Screw Mount Front Shock Shafts (2pcs) Smooth Front-End Performance for Your B74. Upgrade your RC10 B74 with this set of Team Associated 3x24mm V2 Front Shock Shafts. These chrome-finished, screw-mount style shafts offer enhanced durability, smoother shock action, and a secure fit for high-performance 4WD racing. Designed as a direct replacement or tuning option for your front shocks. 🔩 Features: 🧲 Chrome Coated – For smoother shock travel and reduced stiction 🔧 Screw-Mount Piston Design – Secure piston installation (no E-clips required) 💪 Built for long-lasting performance in competitive conditions 📦 Includes: (2) 3x24mm V2 Chrome Screw Mount Shock Shafts ✅ Compatibility: Team Associated RC10 B74 (Original) Fine-tune your B74 suspension and gain the edge with precision Team Associated hardware.

Read more less

Avid B7 Hardened Rear Inner Hinge Pins (3.5x50mm) – 2pcs [AV10135] Product Overview: The Avid 3.5x50mm Hardened Rear Inner Hinge Pins for the Team Associated B7 are designed to fix a known issue with the stock kit pins. The stock 49.5mm length can lead to the pins pulling through the C arm mounts during hard impacts or wear. Avid’s precision-engineered 50mm pins provide that extra bit of length needed to offer better support and reduce the risk of failure — a must-have upgrade for racers pushing their B7 to the limit. Features: (2) 3.5x50mm hardened steel hinge pins for B7 rear inner location Increased length over stock (49.5mm) helps prevent pin pull-out from C arm mounts Designed as a direct replacement for the rear hinge pins in ASC92496 (no need to buy the whole set!) Developed in collaboration with Avid UK distributor (XFactory) For users with original-style C arm mounts: flip the arms and remove a 1mm shim for added retention strength (UK tuning tip!) Includes: (2) 3.5x50mm Hardened Rear Inner Hinge Pins Part Number: AV10135

Read more less

Team Associated FT 3x27.5mm V2 Chrome Shock Shafts – ASC91620 Smooth, Durable, Factory-Grade Suspension Parts Upgrade or replace your V2 shocks with the Factory Team 3x27.5mm Chrome Shock Shafts, engineered for exceptional performance and longevity. Designed specifically for #91577 buggy rear and #91578 truck front shock bodies, these shafts provide a precise fit with a low-friction chrome finish. ⚙️ Features: ✅ Chrome-coated for reduced stiction and increased durability ✅ Designed for secure screw-mounted piston setup ✅ Factory Team precision for consistent shock action ✅ Ideal for competitive racing environments 📦 Includes: (2) 3x27.5mm V2 Chrome Shock Shafts ✅ Compatibility: #91577 – Buggy Rear Shock Bodies #91578 – Truck Front Shock Bodies Not compatible with E-clip piston systems 🏁 Factory Team quality that keeps your ride smooth and race-ready!

Read more less

Team Associated RC10B74.2 FT 2-Gear Differential Cross Pin Set – ASC92322 Upgrade Your Diff for Maximum Durability. Designed for racers using the two-gear differential configuration, the Factory Team 2-Gear Cross Pin Set includes two solid steel pins built to handle high loads and increase longevity. A must-have for optimizing the performance and reliability of your RC10B74 series buggy. 🔧 Features: ✅ Designed for 2-gear diff setups ✅ Solid steel construction for enhanced strength ✅ Factory Team precision for top-tier durability ✅ Ideal for racers seeking reduced rotating mass 📦 Includes: (2) Solid Steel Cross Pins ✅ Compatibility: RC10B74 RC10B74.1 / B74.1D RC10B74.2 / B74.2D 🏁 Trusted by top drivers—reinforce your differential with this Factory Team upgrade!

Read more less

These replacement front suspension arms are designed specifically for the Team Associated RC10B7 1/10 scale buggy. Built for strength and precision, they help maintain proper geometry and smooth suspension movement for peak performance on the track. ✅ Includes:• (2) Front Suspension Arms📦 Part Number: 92410🔧 Compatibility: RC10B7

Read more less

Team Associated RC10B7 Rear Suspension Arms. These replacement suspension arms are intended for the Team Associated RC10B7 1/10 buggy. Package includes two suspension arms. COMPATIBILITY: Team Associated RC10 B7 OriginalTeam Associated RC10 B7D

Read more less

Team Associated RC10T6.4 Carbon Front Shock Tower (Gullwing Arm) [71157] 💥 Precision. Strength. Performance. Upgrade your RC10T6.4 with the Carbon Front Shock Tower, specifically designed for use with gullwing arms (ASC71138). Made from high-quality carbon fiber, this shock tower delivers the perfect blend of lightweight performance and ultra-durable strength—keeping your rig responsive and track-ready. 🔥 Features:✅ Precision-cut carbon fiber for maximum durability✅ Lightweight design improves handling and suspension response✅ Compatible with gullwing arms (ASC71138)✅ Direct replacement for easy install 📦 Part Number: 71157🏁 Brand: Team Associated

Read more less

The Team Associated Factory Team B6 19mm Octalock LCF Slipper Pad is compatible with the Octalock spur gears. This design was debuted with the RC10B74.1 buggy, and are a great way to upgrade the transmission in your B4/B5/B6 series buggy or truck.  

Read more less

Team Associated B6.1/B6.1D Rear Ballstud Mount (91775) Upgrade your suspension adjustability with the Team Associated B6.1/B6.1D Rear Ballstud Mount. This precision-machined part provides a secure mounting point for your rear camber links, allowing for fine-tuned handling and performance. Features: Precision-machined for accurate fit and alignment Provides stable mounting for rear camber link adjustments Durable construction for long-lasting performance Direct replacement for the stock rear ballstud mount Compatibility: Team Associated B6.1 Team Associated B6.1D Includes: (1) Rear Ballstud Mount Perfect for restoring or upgrading your buggy’s rear suspension geometry and tuning options.

Read more less

Team Associated 13mm Front Shock Spring. These optional springs are intended for the Team Associated B6.4D and the B6.4. Package includes two springs. Effects of Shock Spring Changes  Shock Spring  Characteristic  Softer Increased Chassis Roll Increased Traction Better in Bumpy Conditions More Likely to Bottom Out  Stiffer Decreased Chassis Roll Decreased Traction Increased Responsiveness COMPATIBILITY: Team Associated RC10 B74.2Team Associated RC10 B74.2DTeam Associated RC10B6.4Team Associated RC10B6.4D

Read more less

Team Associated 13mm Rear Shock Spring. These optional springs are intended for the Team Associated B6.4D and the B6.4. Package includes two springs. Effects of Shock Spring Changes  Shock Spring  Characteristic  Softer Increased Chassis Roll Increased Traction Better in Bumpy Conditions More Likely to Bottom Out  Stiffer Decreased Chassis Roll Decreased Traction Increased Responsiveness COMPATIBILITY: Team Associated RC10 B74.2Team Associated RC10 B74.2DTeam Associated RC10B6.4Team Associated RC10B6.4D

Read more less

  Keep your wing secure and your rear-end planted with the Team Associated RC10B74 Rear Wing Mount. Designed specifically for the RC10B74 series, this durable wing mount ensures consistent downforce and stability under high-speed cornering and heavy landings. 🔧 Key Features: Durable composite construction Factory Team design and fit Securely mounts the rear wing for improved aerodynamics Lightweight yet strong for competitive racing Direct replacement for stock part 📦 Includes: (1) Rear Wing Mount Assembly ✅ Compatibility: Team Associated RC10B74 May fit other RC10B74-series vehicles (confirm in your manual) Enhance your rear grip and keep your wing locked down with this reliable Factory Team upgrade.

Read more less