Team Associated 5.5x0.5mm Aluminum Ball Stud Washers – Blue (10) – Part 31381Precise Tuning. Clean Looks. Universal Fit. The Team Associated 5.5x0.5mm Aluminum Ball Stud Washers (31381) are a must-have for fine-tuning suspension geometry and roll center adjustments. With a small outside diameter and anodized blue finish, these lightweight washers are ideal for 1/10 scale vehicles, especially touring and on-road setups. ✅ Pack of 10 precision-machined washers✅ 5.5mm outer diameter / 0.5mm thickness✅ Made from lightweight aluminum – won't add unwanted weight✅ Blue anodized finish – clean, pro-level look✅ Perfect for ball stud spacing and suspension tuning✅ Fits all 1/10 scale vehicles – off-road or on-road 📦 Includes: (10) 5.5x0.5mm Blue Aluminum Ball Stud Washers Part #: 31381 💡 Pro Tip: Use multiple washers to stack for exact suspension height or link angle adjustments.

Read more less

Team Associated RC10B7 Factory Team Steel Servo Weight Plate (16g) – Heavyweight Tuning Precision! ⚙️ Need more front-end grip or balance on high-bite surfaces? Add serious weight where it counts with the Team Associated Factory Team Steel Servo Weight Plate. Designed specifically for the RC10B7 and RC10B7D, this optional upgrade adds 16 grams of concentrated weight under the servo to fine-tune your buggy's weight bias and handling response 🔧 Key Features: ✅ Heavy-duty steel construction – strong and reliable✅ Adds 16g of tuning weight right at the servo✅ Ideal for balancing steering response and front traction✅ Precision fit for the RC10B7 and RC10B7D✅ Factory Team quality and finish 📦 Includes: (1) 16g Steel Servo Weight Plate ✅ Compatibility: Team Associated RC10B7 Team Associated RC10B7D 🎯 Fine-tune like the pros and get your setup dialed in — one gram at a time.Upgrade to the Factory Team Steel Servo Weight Plate and take control of your setup! 🏁    

Read more less

Team Associated RC10B74.2 Battery Mount Set. This is a replacement intended for the RC10B74.2 and B74.2D series of vehicles. Package includes battery mount parts tree, two rubber battery straps and mounting hardware. COMPATIBILITY: Team Associated RC10 B74.2Team Associated RC10 B74.2D

Read more less

Team Associated B6.1/B6.1D Rear Ballstud Mount (91775) Upgrade your suspension adjustability with the Team Associated B6.1/B6.1D Rear Ballstud Mount. This precision-machined part provides a secure mounting point for your rear camber links, allowing for fine-tuned handling and performance. Features: Precision-machined for accurate fit and alignment Provides stable mounting for rear camber link adjustments Durable construction for long-lasting performance Direct replacement for the stock rear ballstud mount Compatibility: Team Associated B6.1 Team Associated B6.1D Includes: (1) Rear Ballstud Mount Perfect for restoring or upgrading your buggy’s rear suspension geometry and tuning options.

Read more less

Team Associated 13mm Front Shock Spring. These optional springs are intended for the Team Associated B6.4D and the B6.4. Package includes two springs. Effects of Shock Spring Changes  Shock Spring  Characteristic  Softer Increased Chassis Roll Increased Traction Better in Bumpy Conditions More Likely to Bottom Out  Stiffer Decreased Chassis Roll Decreased Traction Increased Responsiveness COMPATIBILITY: Team Associated RC10 B74.2Team Associated RC10 B74.2DTeam Associated RC10B6.4Team Associated RC10B6.4D

Read more less

Team Associated 13mm Rear Shock Spring. These optional springs are intended for the Team Associated B6.4D and the B6.4. Package includes two springs. Effects of Shock Spring Changes  Shock Spring  Characteristic  Softer Increased Chassis Roll Increased Traction Better in Bumpy Conditions More Likely to Bottom Out  Stiffer Decreased Chassis Roll Decreased Traction Increased Responsiveness COMPATIBILITY: Team Associated RC10 B74.2Team Associated RC10 B74.2DTeam Associated RC10B6.4Team Associated RC10B6.4D

Read more less

Team Associated RC10B74.2 0 and 2mm Front Gearboxes. This is a replacement intended for the RC10B74.2 and B74.2D series of vehicles. Package includes one 0mm height front differential gearbox with cover and one 2mm height front differential gearbox with cover. COMPATIBILITY: Team Associated RC10 B74.2Team Associated RC10 B74.2D

Read more less

  Keep your battery secure and your buggy race-ready with the Team Associated B6 Battery Strap. Designed as a direct replacement part, this strap ensures a snug fit and reliable hold for your battery pack during the most demanding runs. ✅ Direct Replacement – Fits RC10 B6 and B6D buggies✅ Secure Fit – Keeps your battery firmly in place✅ Complete Package – Includes strap, nuts, and hardware Includes: (1) Battery Strap (2) Battery Strap Nuts (Hardware Set) Compatibility: Team Associated RC10 B6 Team Associated RC10 B6D

Read more less

  Keep your wing secure and your rear-end planted with the Team Associated RC10B74 Rear Wing Mount. Designed specifically for the RC10B74 series, this durable wing mount ensures consistent downforce and stability under high-speed cornering and heavy landings. 🔧 Key Features: Durable composite construction Factory Team design and fit Securely mounts the rear wing for improved aerodynamics Lightweight yet strong for competitive racing Direct replacement for stock part 📦 Includes: (1) Rear Wing Mount Assembly ✅ Compatibility: Team Associated RC10B74 May fit other RC10B74-series vehicles (confirm in your manual) Enhance your rear grip and keep your wing locked down with this reliable Factory Team upgrade.

Read more less

This is a Reedy Flat Sensor Wire. The flat sensor wires that are included with the Reedy Sonic motor are now available separately in a variety of lengths to suit 1/10 and 1/8 applications! The flat design looks great and provides an extremely clean look. Choose from between 70mm and 270mm lengths.

Read more less

The Team Associated Factory Team 8.5mm Aluminum Clamping Wheel Hexes are an optional upgrade designed to provide a secure, slip-resistant wheel mounting solution. Featuring a clamping design, these hexes help prevent wheel wobble and maintain consistent wheel alignment under high-load racing conditions. Machined from durable aluminum, they offer lightweight strength while improving reliability over standard hex designs. Ideal for racers looking for a more secure and precise wheel fit. Features Factory Team optional upgrade 8.5mm clamping wheel hex design CNC-machined aluminum construction Helps reduce wheel slop and movement Improves wheel mounting security Lightweight and durable Includes (2) 8.5mm Aluminum Clamping Wheel Hexes (2) Axle Pins (2) Hex Screws A race-ready wheel mounting upgrade built for strength, precision, and consistent performance. 🏁  

Read more less

The 1up Racing Pro Duty Titanium Turnbuckle Set is engineered specifically for the RC10B7.1, delivering maximum strength with massive weight savings. These turnbuckles weigh ~45% less than steel while maintaining exceptional durability for the most demanding racing conditions. Manufactured from precision-ground centerless 6AL4V Titanium bar stock using Swiss-style CNC screw machines with live tooling and thread rolling, these turnbuckles set a new standard in quality and performance. Each piece features the 1up arrow laser-engraved on all four sides of the center lug for unmistakable authenticity. Key Benefits Roughly 45% lighter than steel turnbuckles Increased strength and durability Improves overall vehicle efficiency and response Designed specifically for the B7.1 platform Features Precision 6AL4V Titanium construction Swiss-style CNC machining with rolled threads Laser-engraved 1up arrow on all four sides Pro-level performance and finish Backed by the 1up Racing Pro Duty Guarantee Includes (6) Pro Duty Titanium Turnbuckles Raw Titanium finish (standard) Finish Options (Optional) Raw Titanium  Blue (+$10) Bronze (+$10) Gold (+$10) Pink (+$10) Installation Notes Use 1up Racing 3.2mm Pro Double-Ended Turnbuckle Wrench Apply a small amount of 1up Racing Gold AW Grease to threads before installation for smooth adjustment Fitment Team Associated RC10B7.1 A premium upgrade for racers who want lighter weight, maximum strength, and precision you can feel on the track. 🏁    

Read more less

Precision Fit. Proven Strength. Upgrade your suspension geometry with the Team Associated Factory Team Aluminum 3-Gear Gearbox Arm Mount “C” Block. Designed for the RC10B7, B7D, T7, and SC7 platforms, this CNC-machined aluminum mount provides superior strength, precise alignment, and long-lasting durability under the toughest racing conditions. Factory-Grade Performance Engineered to maintain suspension integrity and reduce flex, this aluminum “C” block ensures consistent handling through high-speed corners and rough landings. Whether you’re chasing podiums or fine-tuning setup precision, this component delivers the reliability and performance serious racers expect from Team Associated. Features: CNC-machined aluminum construction for maximum rigidity and precision fit Designed for 3-gear gearbox setups Improves consistency and handling through rough terrain Factory Team engineering for professional-grade reliability Direct replacement for stock “C” block Includes: (1) Aluminum 3-Gear Gearbox Arm Mount “C” Block Compatibility: Team Associated RC10 B7 Team Associated RC10 B7D Team Associated RC10 T7 Team Associated RC10 SC7 Team Associated Factory Team — Engineered to Win.

Read more less

Lightweight. Rigid. Race-Ready. Step up your B8.4’s performance with the Factory Team 81 mm Carbon Rear Suspension Arms — precision-engineered to deliver tighter control, improved cornering stability, and consistent handling from start to finish. Designed for racers chasing maximum response and rear-end confidence, these arms bring pro-level refinement straight to your buggy. Race-Ready Design Constructed from lightweight carbon composite, these arms reduce flex and lower overall weight without sacrificing strength. The result is a more connected feel on high-traction tracks, smoother transitions through technical sections, and sharper feedback under load. Features: Lightweight performance upgrade for Team Associated RC10 B8.4 / B8.4D Increased rigidity for enhanced rear-end feel Durable carbon composite construction Factory Team engineered precision for competitive racing Includes: (1) Factory Team Carbon Rear 81 mm Suspension Arm (4) Shims Team Associated Factory Team — Engineered to Win.    

Read more less

🔧 Quick-Access Body and Battery RetentionThe Team Associated B6 Thumbscrews are genuine replacement parts designed for the RC10 B6 and B6D buggies. These thumbscrews provide a secure and tool-free solution for fastening body mounts or battery straps — making maintenance and adjustments faster than ever. ⚙️ About the Thumbscrews Constructed from durable composite material with precision-molded threads, these thumbscrews ensure a tight and reliable hold while allowing easy removal by hand. Whether you’re making quick pit adjustments or swapping batteries between heats, these are a must-have for convenience and performance. 🌟 Features Direct replacement for RC10 B6 and B6D thumbscrews Tool-free installation and removal Durable composite construction for long life Provides secure hold for battery straps or body mounts Designed for quick pit adjustments Includes: (2) Team Associated B6 Thumbscrews Compatibility: Team Associated RC10 B6 Team Associated RC10 B6D & more 🧰 Simple, strong, and efficient — these thumbscrews keep your buggy race-ready with no tools required.  

Read more less

Dial in your suspension with Team Associated’s Factory Team 13mm shock pistons. The #91933 set features 2x1.7mm holes with a 2.5mm thick profile, providing a great tuning option for refining pack and rebound on modern high-performance off-road tracks. 📦 Includes: (2) FT 13mm Shock Pistons – 2x1.7mm hole layout 2.5mm thick ⚙️ Key Features: CNC-machined for ultra-precise damping consistency Designed for 13mm shock bodies used on AE’s latest platforms Ideal for high-traction surfaces needing tighter shock control Compatible with RC10B6.4, RC10B74.2, and similar vehicles 📌 Tuning Tip: Use 2x1.7mm pistons to increase damping over 2x1.8mm, providing more pack and control in bumpy or high-speed corners.

Read more less

Enhance steering precision and durability with the Team Associated Factory Team Aluminum Clamping Servo Horn. Designed for 23-tooth servos, this 15.5mm horn offers a secure clamping design to prevent slipping and maintain consistent steering response. Features: CNC-machined aluminum for maximum strength and precision Clamping design for a secure, slip-free fit 15.5mm length for precise steering geometry Fits 23T spline servos Factory Team quality for competition-level performance Includes: (1) Aluminum Clamping Servo Horn – 23T, 15.5mm Perfect for racers who demand reliable, high-performance steering control.

Read more less

RPM Extra Wide Front Bumper (Black) – RPM80042 Front-End Armor for Your Associated RideThe RPM Extra Wide Front Bumper is built for drivers who don’t hold back. With a full 6 inches of durable protection, this upgrade guards your chassis during head-on impacts and hard landings — perfect for bashing, racing, or rough terrain adventures. ✅ Features: 📏 6-inch width for maximum front-end coverage 🧱 High-strength RPM nylon absorbs big hits without cracking 🏁 Reinforced ribs double as skid rails for gliding over obstacles 🛬 Extra protection from hard landings and crash damage ⚙️ Direct fit for popular Associated models with no hassle 📦 Includes: (1) RPM Extra Wide Front Bumper (Black) 📊 Specifications: Material: RPM nylon composite Width: 6 in Color: Black Compatibility: Fits vehicles using Associated bulkheads #91359, #91364, or #9562 Compatible Models: Team Associated Trophy Rat Pro2 RT10SW RB10 B5 T5 Whether you bash or race, the RPM Extra Wide Front Bumper adds serious protection where it counts. Don’t just survive impacts — dominate them. 💥

Read more less

Team Associated RC10B7 Top Shaft – Precision Replacement for Smooth Power Delivery! ⚙️ Keep your RC10B7 or RC10B7D drivetrain performing flawlessly with the Team Associated Top Shaft!This precision-machined replacement part is built to deliver smooth, reliable power transfer, helping maintain your buggy’s peak performance on race day. ✨ Key Features: ⚙️ Precision Machined Top Shaft – Ensures smooth and efficient drivetrain performance 🔧 Direct Replacement – Designed specifically for easy fitment in the RC10B7 and RC10B7D 🏁 Factory Team Reliability – Manufactured to meet Team Associated’s competition-grade standards 🛠️ Essential for Maintenance – Restore like-new drivetrain function after wear or damage 📦 Includes: ✔ (1) Top Shaft 📦 Compatibility: ✅ Team Associated RC10B7 ✅ Team Associated RC10B7D 📌 Note: 🔹 Use as a direct replacement for the stock top shaft.🔹 Recommended for racers looking to maintain drivetrain reliability and performance. 🏁 Maintain peak drivetrain efficiency with the Team Associated Top Shaft! 🔥 Smooth power, consistent performance — race ready with Factory Team precision!   

Read more less

Overview:Upgrade your suspension durability and precision with the Team Associated RC10B7 Aluminum Arm Mount "D Block". Machined from high-quality aluminum, this mount improves rigidity in the rear suspension assembly, keeping your hinge pins firmly aligned under heavy loads. It’s a race-proven upgrade that enhances consistency, handling, and longevity compared to the stock composite part. Features: CNC-machined aluminum construction for superior strength Maintains precise hinge pin alignment for consistent handling Blue anodized finish for durability and Factory Team looks Direct replacement upgrade for the stock “D Block” Genuine Team Associated Factory Team component Compatibility: Team Associated RC10B7 1/10 2WD Buggy May also fit other B7-based platforms (check manual for details) Includes: (1) Aluminum Arm Mount "D Block" Part Number: 92433 ⚡ Pro Tip: Combine the Aluminum Arm Mount "D Block" with the B7 Factory Team Arm Mount Inserts (92434) to unlock fine-tuned rear suspension geometry options.

Read more less

Upgrade your tuning options with the Team Associated RC10B7 Factory Team Caster Block Link Mounts. Made from AE’s legendary lightweight carbon fiber, these optional mounts increase the caster block link offset by +1mm, giving racers an additional adjustment point for fine-tuning handling characteristics to suit different track conditions. A simple but effective setup change for drivers looking to refine steering feel, roll characteristics, and front-end response. Features Factory Team carbon fiber construction Lightweight, strong, and race-proven Increases caster block link offset by +1mm Provides additional tuning flexibility Direct fit for the RC10B7 platform Includes (2) +1mm Caster Block Link Mounts

Read more less

Team Associated RC10T6.4 Carbon Front Shock Tower (Gullwing Arm) [71157] 💥 Precision. Strength. Performance. Upgrade your RC10T6.4 with the Carbon Front Shock Tower, specifically designed for use with gullwing arms (ASC71138). Made from high-quality carbon fiber, this shock tower delivers the perfect blend of lightweight performance and ultra-durable strength—keeping your rig responsive and track-ready. 🔥 Features:✅ Precision-cut carbon fiber for maximum durability✅ Lightweight design improves handling and suspension response✅ Compatible with gullwing arms (ASC71138)✅ Direct replacement for easy install 📦 Part Number: 71157🏁 Brand: Team Associated

Read more less

Complete your sway bar setup or replace worn components with this genuine RC10B74 Anti-Roll Bar Hardware Set from Team Associated. Designed specifically for the B74 series, this hardware kit ensures your anti-roll bars function smoothly and securely. 🔧 Key Features: OEM replacement hardware for RC10B74 anti-roll bar system Includes mounting pieces and fastening components Precision fit for secure and reliable installation Ideal for fresh builds or routine maintenance 📦 Includes: Anti-roll bar mounting hardware (exact contents may vary) ✅ Compatibility: RC10B74 May fit other B74 platform variants with anti-roll bar setups Maintain consistent suspension balance and performance—use the right hardware for the job with this official Team Associated upgrade.

Read more less

The Team Associated Factory Team B6 19mm Octalock LCF Slipper Pad is compatible with the Octalock spur gears. This design was debuted with the RC10B74.1 buggy, and are a great way to upgrade the transmission in your B4/B5/B6 series buggy or truck.  

Read more less

Upgrade your gear differential with this Factory Team aluminum diff cover for the RC10B6.1. Designed for maximum durability and precision, this machined aluminum cover adds strength to the gear diff case and helps reduce flex under load—ideal for high-power setups and serious racers. 🔥 Key Features: Precision CNC-machined aluminum construction Factory Team performance part for racing applications Provides added rigidity and improved seal pressure Hard-anodized finish for long-lasting durability Direct replacement for the stock plastic gear diff cover ✅ Compatibility: RC10B6.1 RC10B6.1D RC10B6.2 / B6.3 series (compatible gear diff cases) May also fit other Team Associated models using the same gear diff design 📦 Includes: (1) Aluminum Gear Diff Cover ⚠️ Tip:For best results, use with Team Associated Factory Team gear diff components and premium diff fluid.

Read more less

Team Associated 13mm Rear Shock Spring. These replacement springs springs are intended for the Team Associated B6.4D, however, they will also work with the Team Associated B6.4D as a tuning option. Package includes two springs. Effects of Shock Spring Changes  Shock Spring  Characteristic  Softer Increased Chassis Roll Increased Traction Better in Bumpy Conditions More Likely to Bottom Out  Stiffer Decreased Chassis Roll Decreased Traction Increased Responsiveness COMPATIBILITY: Team Associated RC10 B74.2Team Associated RC10 B74.2DTeam Associated RC10B6.4Team Associated RC10B6.4D

Read more less

Team Associated RC10B74 74mm CVA Bones (2) – Part 92193Smooth Power Transfer. Factory Replacement. The Team Associated RC10B74 74mm CVA Bones (92193) are direct replacement parts designed specifically for the RC10B74 platform. These precision-machined CVA bones are built to handle the rigors of racing, offering consistent drivetrain performance and durability. ✅ Designed for the Team Associated RC10B74✅ Precision-machined for smooth drivetrain engagement✅ Durable construction for long-lasting performance✅ OEM replacement – fits just like the original✅ Ideal for spares or fresh builds 📦 Includes: (2) 74mm CVA Bones Part #: 92193 💡 Pro Tip: Regular inspection and replacement of CVA components can help prevent drivetrain wear and unexpected failures on race day.  

Read more less

  Team Associated 3x24mm V2 Chrome Screw Mount Front Shock Shafts (2pcs) Smooth Front-End Performance for Your B74. Upgrade your RC10 B74 with this set of Team Associated 3x24mm V2 Front Shock Shafts. These chrome-finished, screw-mount style shafts offer enhanced durability, smoother shock action, and a secure fit for high-performance 4WD racing. Designed as a direct replacement or tuning option for your front shocks. 🔩 Features: 🧲 Chrome Coated – For smoother shock travel and reduced stiction 🔧 Screw-Mount Piston Design – Secure piston installation (no E-clips required) 💪 Built for long-lasting performance in competitive conditions 📦 Includes: (2) 3x24mm V2 Chrome Screw Mount Shock Shafts ✅ Compatibility: Team Associated RC10 B74 (Original) Fine-tune your B74 suspension and gain the edge with precision Team Associated hardware.

Read more less

Team Associated 12mm Blue Aluminum Shock Bushings (4) – Part 91816Precision Fit. Race-Proven Durability. The Team Associated 12mm Blue Aluminum Shock Bushings (91816) are high-quality replacements designed for enhanced suspension performance and long-lasting durability. Perfect for demanding race setups, these bushings are crafted from lightweight anodized aluminum to maintain alignment and reduce play in the shock mounting. ✅ Fits 12mm shock mount applications on select Team Associated vehicles✅ CNC-machined from high-grade aluminum for strength and precision✅ Anodized blue for a sleek, professional finish✅ Reduces slop and enhances suspension consistency✅ Upgraded alternative to plastic bushings 📦 Includes: (4) 12mm Blue Aluminum Shock Bushings Part #: 91816 💡 Pro Tip: Use with matching shock components for maximum suspension precision and race-level performance.

Read more less

Team Associated 10mm Blue Aluminum Shock Bushings (4) – Part 91815Lightweight. Durable. Precision-Tuned. The Team Associated 10mm Blue Aluminum Shock Bushings (91815) are precision-machined replacements designed to improve durability and reduce slop in your shock mounting setup. These aluminum bushings offer a secure, high-performance fit and are a direct upgrade over stock plastic bushings. ✅ Fits 10mm shock mounts on various Team Associated vehicles✅ Machined from lightweight, high-strength aluminum✅ Anodized blue for a clean factory look✅ Improves durability and shock alignment✅ Direct replacement for worn or damaged bushings 📦 Includes: (4) 10mm Blue Aluminum Shock Bushings Part #: 91815 💡 Pro Tip: Swap out plastic bushings with these for a tighter, more responsive suspension feel—especially under race conditions.  

Read more less

 Fine-tune the rear suspension geometry of your Team Associated RC10B7.1 with the Factory Team Aluminum Arm Mount “C” Block (-1°) (92585). Designed for the B7.1 buggy platform, this precision aluminum mount adjusts rear toe characteristics to help racers dial in stability and cornering response for different track conditions. Machined from high-quality aluminum and finished in Factory Team blue, this upgrade provides increased strength and consistent alignment compared to standard composite mounts. The -1° configuration allows racers to modify rear suspension geometry to improve balance, traction, and rotation through corners. This arm mount is a direct replacement for the RC10B7.1 kit and can also be used as an upgrade option for the B7.1D, offering racers additional setup flexibility with the 3-gear gearbox configuration. Features• -1° rear toe geometry adjustment for suspension tuning• Factory Team aluminum construction for strength and precision• Improves rear suspension alignment and durability• Designed for 3-gear gearbox configuration• Ideal tuning upgrade for the Team Associated B7.1 platform Includes• (1) RC10B7.1 Factory Team 3-Gear Gearbox Aluminum Arm Mount “C” Block (-1°)          

Read more less

Restore precise front suspension performance with the Team Associated RC10B7.1 Factory Team Front Shock Tower (-2mm) (92581). Designed for the B7.1 buggy platform, this tower maintains accurate shock mounting geometry and consistent front-end handling during racing and practice. The -2mm lowered design helps reduce the center of gravity, improving stability and responsiveness on high-traction surfaces such as carpet and groomed dirt tracks. Built with Factory Team precision, this component ensures dependable durability and consistent suspension performance for competitive racing. Engineered specifically for the Team Associated B7.1, it installs easily as a direct replacement to keep your buggy performing at its best. Features• -2mm lowered shock tower design for improved stability• Maintains accurate front suspension geometry• Supports consistent steering response and handling• Factory Team precision engineering for race performance• Direct replacement for the RC10B7.1 / B7.1 buggy platform Includes• (1) RC10B7.1 Factory Team Front Shock Tower (-2mm)      

Read more less

Upgrade the precision and feel of your front suspension with the Team Associated RC10B7.1 Factory Team Carbon Caster & Steering Blocks Set (92577). Designed as a premium upgrade for the B7.1 buggy platform, this set improves steering response and delivers the connected front-end feel competitive racers demand. Incorporating Factory Team carbon construction, these components reduce weight while maintaining excellent stiffness and durability. The result is sharper steering input, consistent suspension geometry, and confident cornering performance on high-grip race tracks. Engineered specifically for the Team Associated B7.1, this set integrates seamlessly with the chassis and suspension layout while providing multiple KPI steering block options to fine-tune front-end handling for different track conditions. Features• Factory Team carbon construction for lightweight strength• Improved steering precision and responsiveness• Maintains accurate suspension geometry• Multiple KPI steering block options for front-end tuning• Premium Factory Team upgrade for the B7.1 platform Includes• (2) Carbon Caster Blocks• (2) 4L/R Carbon Steering Blocks (KPI0)• (2) 4L/R Carbon Steering Blocks (KPI2)• (2) 3L/R Carbon Steering Blocks (KPI0)• (2) 3L/R Carbon Steering Blocks (KPI2) A race-ready upgrade for drivers looking to maximize steering precision and performance from their RC10B7.1 / B7.1 buggy.  

Read more less

The Team Associated RC10B7.1 Front Suspension Arms (92574) are precision replacement components designed to maintain accurate steering response and predictable handling on the track. These arms play a critical role in supporting consistent front-end geometry, helping drivers maintain control through technical sections and high-speed corners. Engineered specifically for the RC10B7.1 platform, these suspension arms integrate seamlessly with the chassis to deliver reliable performance under competitive racing conditions. Their purpose-built design ensures dependable durability and precise fitment, making them essential for keeping your buggy performing at its best. Features• Optimized steering geometry for improved front-end response• Race-tuned handling balance for consistent performance• Platform-specific design for RC10B7.1• Precision manufacturing for a perfect fit and reliable operation Includes• (1) Left RC10B7.1 Front Suspension Arm• (1) Right RC10B7.1 Front Suspension Arm  

Read more less

Precision. Strength. Performance.Keep your Team Associated short course or stadium truck performing at its best with these Rear Suspension Arms (71105). Designed for precise geometry and rugged durability, they deliver consistent handling and reliability on the track or in the dirt. Factory Fit. Race Proven.These genuine Team Associated replacement arms fit both left and right sides and are molded from high-strength composite for balanced flex and long-lasting performance. Ideal for racers and bashers alike looking to restore factory handling and suspension response. 💪 Features: Genuine Team Associated replacement parts High-strength composite material for durability and consistent flex Factory geometry for precise suspension movement Direct fit for multiple RC10 platforms Includes left and right arms 📦 Includes: (1) Left Rear Suspension Arm (1) Right Rear Suspension Arm ✅ Compatibility: Team Associated RC10 SC6.1 Team Associated RC10 SC6.2 Team Associated RC10 T6.1  

Read more less

💪 Heavy-Duty Drivetrain Upgrade – Built for strength and endurance, the Factory Team 71mm HD CVA Bones deliver reliable power transfer under the toughest racing conditions. Perfect for high-grip tracks where durability and smooth operation are critical. ⚙️ Features:✅ 71mm heavy-duty design for added strength✅ Precision-machined for smooth, efficient performance✅ Withstands the demands of competitive racing✅ Factory Team quality ensures long-lasting reliability 📦 Includes: (2) 71mm HD CVA Bones 🔧 Compatibility: Team Associated RC10B84 💡 Pro Tip: Pair HD CVA Bones with new outdrives during installation — mixing old and new parts can accelerate wear and reduce efficiency.  

Read more less