Team Associated RC10B74.2 FT 2-Gear Differential Cross Pin Set – ASC92322 Upgrade Your Diff for Maximum Durability. Designed for racers using the two-gear differential configuration, the Factory Team 2-Gear Cross Pin Set includes two solid steel pins built to handle high loads and increase longevity. A must-have for optimizing the performance and reliability of your RC10B74 series buggy. 🔧 Features: ✅ Designed for 2-gear diff setups ✅ Solid steel construction for enhanced strength ✅ Factory Team precision for top-tier durability ✅ Ideal for racers seeking reduced rotating mass 📦 Includes: (2) Solid Steel Cross Pins ✅ Compatibility: RC10B74 RC10B74.1 / B74.1D RC10B74.2 / B74.2D 🏁 Trusted by top drivers—reinforce your differential with this Factory Team upgrade!

Read more less

Team Associated RC10B7 HD Gear Differential Outdrives (2) – Built Tough for Maximum Power Transfer! ⚙️ Maintain your RC10B7 or RC10B7D’s drivetrain strength with the Team Associated Factory Team HD Gear Differential Outdrives!These heavy-duty outdrives are designed to handle the intense loads of competitive racing, ensuring your buggy stays durable and consistent under extreme conditions. ✨ Key Features: ⚙️ Heavy-Duty Construction – Engineered to handle the rigors of intense 1/10 scale racing 🔧 Direct Replacement Design – Perfect fit for the Team Associated RC10B7 and B7D gear differentials 🏁 Improved Durability – Strengthens the drivetrain for better long-term performance 🛡️ Trusted Factory Team Quality – Race-proven reliability from Team Associated 📦 Includes: ✔ (2) Heavy-Duty Gear Differential Outdrives 📦 Compatibility: ✅ Team Associated RC10B7 ✅ Team Associated RC10B7D 📌 Note: 🔹 Direct fit for stock RC10B7 and B7D differentials.🔹 Ideal for racers looking to enhance drivetrain longevity and consistency under high loads. 🏁 Drive harder and push your limits with the Factory Team HD Gear Differential Outdrives! 🔥 Upgrade today for maximum durability on race day with Team Associated! 🔥  

Read more less

Team Associated RC10B7 Factory Team Carbon Side Rails. Constructed from AE legendary carbon composite material, these optional side rails are intended for the Team Associated RC10B7 1/10 buggy to stiffen the chassis and eliminate flex as a tuning option for high bite surfaces. Package includes two side rails. COMPATIBILITY: Team Associated RC10 B7 OriginalTeam Associated RC10 B7D

Read more less

Keep your differential running smooth and leak-free with the Team Associated 91782 Gear Differential Seals. Designed as a direct replacement for the B6.1 and B6.1D platforms, these seals restore proper diff performance, maintain consistent fluid viscosity, and help extend the life of your internal diff components. Perfect for routine maintenance or a full differential rebuild. Features Genuine Team Associated replacement seals Ensures proper diff sealing and fluid retention Helps maintain smooth, consistent differential action Ideal for rebuilds, maintenance, or performance refresh Compatible With B6.1 B6.1D And other Team Associated models using the same gear differential design

Read more less

Team Associated RC10B74.2 Battery Mount Set. This is a replacement intended for the RC10B74.2 and B74.2D series of vehicles. Package includes battery mount parts tree, two rubber battery straps and mounting hardware. COMPATIBILITY: Team Associated RC10 B74.2Team Associated RC10 B74.2D

Read more less

Team Associated 13mm Front Shock Spring. These optional springs are intended for the Team Associated B6.4D and the B6.4. Package includes two springs. Effects of Shock Spring Changes  Shock Spring  Characteristic  Softer Increased Chassis Roll Increased Traction Better in Bumpy Conditions More Likely to Bottom Out  Stiffer Decreased Chassis Roll Decreased Traction Increased Responsiveness COMPATIBILITY: Team Associated RC10 B74.2Team Associated RC10 B74.2DTeam Associated RC10B6.4Team Associated RC10B6.4D

Read more less

Team Associated RC10B74 74mm CVA Bones (2) – Part 92193Smooth Power Transfer. Factory Replacement. The Team Associated RC10B74 74mm CVA Bones (92193) are direct replacement parts designed specifically for the RC10B74 platform. These precision-machined CVA bones are built to handle the rigors of racing, offering consistent drivetrain performance and durability. ✅ Designed for the Team Associated RC10B74✅ Precision-machined for smooth drivetrain engagement✅ Durable construction for long-lasting performance✅ OEM replacement – fits just like the original✅ Ideal for spares or fresh builds 📦 Includes: (2) 74mm CVA Bones Part #: 92193 💡 Pro Tip: Regular inspection and replacement of CVA components can help prevent drivetrain wear and unexpected failures on race day.  

Read more less

Team Associated RC10B74.2 0 and 2mm Front Gearboxes. This is a replacement intended for the RC10B74.2 and B74.2D series of vehicles. Package includes one 0mm height front differential gearbox with cover and one 2mm height front differential gearbox with cover. COMPATIBILITY: Team Associated RC10 B74.2Team Associated RC10 B74.2D

Read more less

  Team Associated 3x24mm V2 Chrome Screw Mount Front Shock Shafts (2pcs) Smooth Front-End Performance for Your B74. Upgrade your RC10 B74 with this set of Team Associated 3x24mm V2 Front Shock Shafts. These chrome-finished, screw-mount style shafts offer enhanced durability, smoother shock action, and a secure fit for high-performance 4WD racing. Designed as a direct replacement or tuning option for your front shocks. 🔩 Features: 🧲 Chrome Coated – For smoother shock travel and reduced stiction 🔧 Screw-Mount Piston Design – Secure piston installation (no E-clips required) 💪 Built for long-lasting performance in competitive conditions 📦 Includes: (2) 3x24mm V2 Chrome Screw Mount Shock Shafts ✅ Compatibility: Team Associated RC10 B74 (Original) Fine-tune your B74 suspension and gain the edge with precision Team Associated hardware.

Read more less

Team Associated 12mm Blue Aluminum Shock Bushings (4) – Part 91816Precision Fit. Race-Proven Durability. The Team Associated 12mm Blue Aluminum Shock Bushings (91816) are high-quality replacements designed for enhanced suspension performance and long-lasting durability. Perfect for demanding race setups, these bushings are crafted from lightweight anodized aluminum to maintain alignment and reduce play in the shock mounting. ✅ Fits 12mm shock mount applications on select Team Associated vehicles✅ CNC-machined from high-grade aluminum for strength and precision✅ Anodized blue for a sleek, professional finish✅ Reduces slop and enhances suspension consistency✅ Upgraded alternative to plastic bushings 📦 Includes: (4) 12mm Blue Aluminum Shock Bushings Part #: 91816 💡 Pro Tip: Use with matching shock components for maximum suspension precision and race-level performance.

Read more less

Key Features 7075 T6 aluminum Clamping style with large m2.5 screw Length 18.5mm for smoother steering response and less stress on the servo Laser etched spline size Overview Designed for the steering servo in the RC8B3, RC8B3e, RC8T3, and RC8T3e. These new machined aluminum servo horns are stronger than the stock plastic ones that come with most servos and due to the slightly shorter length, they provide a smoother steering feel while decreasing the load on the servo.   ASC1361

Read more less

🔧 Quick-Access Body and Battery RetentionThe Team Associated B6 Thumbscrews are genuine replacement parts designed for the RC10 B6 and B6D buggies. These thumbscrews provide a secure and tool-free solution for fastening body mounts or battery straps — making maintenance and adjustments faster than ever. ⚙️ About the Thumbscrews Constructed from durable composite material with precision-molded threads, these thumbscrews ensure a tight and reliable hold while allowing easy removal by hand. Whether you’re making quick pit adjustments or swapping batteries between heats, these are a must-have for convenience and performance. 🌟 Features Direct replacement for RC10 B6 and B6D thumbscrews Tool-free installation and removal Durable composite construction for long life Provides secure hold for battery straps or body mounts Designed for quick pit adjustments Includes: (2) Team Associated B6 Thumbscrews Compatibility: Team Associated RC10 B6 Team Associated RC10 B6D & more 🧰 Simple, strong, and efficient — these thumbscrews keep your buggy race-ready with no tools required.  

Read more less

Overview:Protect your chassis and keep your buggy looking factory fresh with the Team Associated RC10B84 Factory Team Chassis Protective Sheet. Made from heavy-duty adhesive-backed material, this sheet prevents scratches, scrapes, and wear on the bottom of your chassis while maintaining a professional look. Pre-cut for a perfect fit, it installs easily and can be removed cleanly when it’s time for a replacement. Features: Genuine Factory Team accessory for the RC10B84 Heavy-duty material protects chassis from scratches and wear Pre-cut for an exact fit on the B84 chassis Strong adhesive backing stays put during racing Easy to apply and remove without residue Helps maintain resale value and professional appearance Compatibility: Team Associated RC10B84 1/10 4WD Buggy Includes: (1) Pre-cut Factory Team Chassis Protective Sheet Part Number: 92556  

Read more less

Team Associated RC10B6.4 -1mm Scrub Caster & Steering Blocks (Carbon) [91985] 🛠️ Precision Meets Performance 💨 Upgrade your front end with this Carbon -1mm Scrub Caster & Steering Block Set for the RC10B6.4 and B6.4D. Built for racers who want rigidity, adjustability, and the ultimate in high-traction control. Carbon construction = serious stiffness. 🔥 ✅ Rigid carbon for a more responsive suspension✅ Includes multiple caster insert options for fine-tuning✅ -1mm scrub radius for quicker steering feel✅ Built for B6.4 / B6.4D platforms Includes:(2) Carbon Caster Blocks(4) Carbon Steering Blocks(2) +/- 0° Caster Inserts(2) +/- 2.5° Caster Inserts(2) +/- 5° Caster Inserts(2) Shims 📦 Part Number: 91985🚗 Brand: Team Associated

Read more less

Team Associated 7.8x1.0mm Aluminum Bulkhead Ball Stud Washers – Blue (10) – Part 31385Wider Support. Precision Shimming. Race-Ready Tuning. The Team Associated 7.8x1.0mm Blue Aluminum Ball Stud Washers (31385) are ideal for bulkhead and arm mount shimming in both on-road and off-road 1/10 scale vehicles. With a larger outer diameter, these washers provide more surface area, perfect for critical suspension points where strength and consistency matter. ✅ Pack of 10 precision washers✅ 7.8mm outer diameter / 1.0mm thickness✅ Anodized blue aluminum – lightweight and durable✅ Ideal for bulkhead, arm mount, and ball stud adjustments✅ Common in off-road and on-road setups alike✅ Perfect fit for 1/10 scale race platforms 📦 Includes: (10) 7.8x1.0mm Blue Aluminum Ball Stud Washers Part #: 31385 💡 Pro Tip: Use these in areas where added washer surface area can prevent flex or part deformation over time.

Read more less

Team Associated RC10B7 Factory Team Aluminum Pivot Ball Set – Lightweight Precision for Peak Performance! ⚙️ Enhance your buggy’s handling and responsiveness with the Team Associated Factory Team Aluminum Pivot Ball Set for the RC10B7 and RC10B7D!Made from high-strength 7075 aluminum, these pivot balls are engineered to reduce unsprung weight while maintaining maximum durability, giving you a noticeable edge on the track. ✨ Key Features: ⚙️ 7075 Aluminum Construction – Combines strength with lightweight performance for competitive racing 🛡️ Hard-Anodized Finish – Improves wear resistance and ensures long-lasting durability 🪶 3.2-Gram Weight Reduction – Lighter than stock steel pivot balls for quicker acceleration and sharper handling 🔧 Precision Machining – Ensures a smooth, consistent fit and performance 🏁 Optimized for Track Conditions – Reduces unsprung weight to boost agility and responsiveness 📦 Includes: ✔ (1) Factory Team Aluminum Pivot Ball Set 📦 Compatibility: ✅ Team Associated RC10B7 ✅ Team Associated RC10B7D 📌 Note: 🔹 Direct replacement for stock pivot balls.🔹 Highly recommended for racers looking to fine-tune weight distribution and improve overall vehicle dynamics. 🏁 Race lighter, stronger, and faster with the Factory Team Aluminum Pivot Ball Set! 🔥 Experience superior handling and durability with Team Associated Factory Team quality! 🔥  

Read more less

Team Associated RC10B7/B7D Factory Team Steering Bellcrank & Rack Set (Carbon) – Strength, Precision, and Performance! 🛞 Upgrade your steering system with the Team Associated Factory Team Carbon Bellcrank & Rack Set for the RC10B7 and RC10B7D!Molded from performance-proven carbon composite, this optional set provides enhanced durability and improved steering precision, while maintaining just the right amount of flex for maximum handling performance on the track. ✨ Key Features: 🛞 Carbon Composite Construction – Stronger than stock parts while retaining necessary flex for superior handling 🔧 Complete Steering System Upgrade – Includes the steering rack and both bellcrank arms/horns 🏁 Increased Durability – Withstands the rigors of intense racing without sacrificing steering response 🛡️ Factory Team Performance – Designed by Team Associated for top-level competition 📦 Includes: ✔ (1) Carbon Composite Steering Rack ✔ (2) Carbon Composite Bellcrank Arms/Horns 📦 Compatibility: ✅ Team Associated RC10B7 ✅ Team Associated RC10B7D 📌 Note: 🔹 Direct fit for RC10B7 and B7D chassis.🔹 Recommended for racers seeking improved strength and optimized steering feel. 🏁 Unlock sharper, more durable steering performance with the Factory Team Carbon Bellcrank & Rack Set! 🔥 Install it today and feel the Factory Team advantage with your Team Associated RC10B7 or RC10B7D! 🔥

Read more less

Team Associated RC10T6.4 Carbon Front Shock Tower (Gullwing Arm) [71157] 💥 Precision. Strength. Performance. Upgrade your RC10T6.4 with the Carbon Front Shock Tower, specifically designed for use with gullwing arms (ASC71138). Made from high-quality carbon fiber, this shock tower delivers the perfect blend of lightweight performance and ultra-durable strength—keeping your rig responsive and track-ready. 🔥 Features:✅ Precision-cut carbon fiber for maximum durability✅ Lightweight design improves handling and suspension response✅ Compatible with gullwing arms (ASC71138)✅ Direct replacement for easy install 📦 Part Number: 71157🏁 Brand: Team Associated

Read more less

Complete your sway bar setup or replace worn components with this genuine RC10B74 Anti-Roll Bar Hardware Set from Team Associated. Designed specifically for the B74 series, this hardware kit ensures your anti-roll bars function smoothly and securely. 🔧 Key Features: OEM replacement hardware for RC10B74 anti-roll bar system Includes mounting pieces and fastening components Precision fit for secure and reliable installation Ideal for fresh builds or routine maintenance 📦 Includes: Anti-roll bar mounting hardware (exact contents may vary) ✅ Compatibility: RC10B74 May fit other B74 platform variants with anti-roll bar setups Maintain consistent suspension balance and performance—use the right hardware for the job with this official Team Associated upgrade.

Read more less

The Team Associated Factory Team B6 19mm Octalock LCF Slipper Pad is compatible with the Octalock spur gears. This design was debuted with the RC10B74.1 buggy, and are a great way to upgrade the transmission in your B4/B5/B6 series buggy or truck.  

Read more less

Upgrade your gear differential with this Factory Team aluminum diff cover for the RC10B6.1. Designed for maximum durability and precision, this machined aluminum cover adds strength to the gear diff case and helps reduce flex under load—ideal for high-power setups and serious racers. 🔥 Key Features: Precision CNC-machined aluminum construction Factory Team performance part for racing applications Provides added rigidity and improved seal pressure Hard-anodized finish for long-lasting durability Direct replacement for the stock plastic gear diff cover ✅ Compatibility: RC10B6.1 RC10B6.1D RC10B6.2 / B6.3 series (compatible gear diff cases) May also fit other Team Associated models using the same gear diff design 📦 Includes: (1) Aluminum Gear Diff Cover ⚠️ Tip:For best results, use with Team Associated Factory Team gear diff components and premium diff fluid.

Read more less

Team Associated 13mm Rear Shock Spring. These optional springs are intended for the Team Associated B6.4D and the B6.4. Package includes two springs. Effects of Shock Spring Changes  Shock Spring  Characteristic  Softer Increased Chassis Roll Increased Traction Better in Bumpy Conditions More Likely to Bottom Out  Stiffer Decreased Chassis Roll Decreased Traction Increased Responsiveness COMPATIBILITY: Team Associated RC10 B74.2Team Associated RC10 B74.2DTeam Associated RC10B6.4Team Associated RC10B6.4D

Read more less

Team Associated 13mm Rear Shock Spring. These optional springs are intended for the Team Associated B6.4D and the B6.4. Package includes two springs. Effects of Shock Spring Changes  Shock Spring  Characteristic  Softer Increased Chassis Roll Increased Traction Better in Bumpy Conditions More Likely to Bottom Out  Stiffer Decreased Chassis Roll Decreased Traction Increased Responsiveness COMPATIBILITY: Team Associated RC10 B74.2Team Associated RC10 B74.2DTeam Associated RC10B6.4Team Associated RC10B6.4D

Read more less

Keep your electronics secure and your buggy running cool with the Team Associated RC10B74.1 LP Battery Posts & Fan Mount Set. Designed as a direct replacement for the RC10B74.1 and B74.1D platforms, this set includes low-profile battery posts and a dedicated fan mount to ensure a clean, lightweight, and reliable installation. Perfect for racers looking to refresh worn components or complete a new build. ⭐ Features Direct replacement for RC10B74.1 and RC10B74.1D Low-profile battery posts for secure pack mounting Integrated fan mount for cooling your ESC or motor Genuine Team Associated factory parts for perfect fit and reliability 📦 Includes (1) LP Battery Post Set (1) Fan Mount  

Read more less

  Keep your wing secure and your rear-end planted with the Team Associated RC10B74 Rear Wing Mount. Designed specifically for the RC10B74 series, this durable wing mount ensures consistent downforce and stability under high-speed cornering and heavy landings. 🔧 Key Features: Durable composite construction Factory Team design and fit Securely mounts the rear wing for improved aerodynamics Lightweight yet strong for competitive racing Direct replacement for stock part 📦 Includes: (1) Rear Wing Mount Assembly ✅ Compatibility: Team Associated RC10B74 May fit other RC10B74-series vehicles (confirm in your manual) Enhance your rear grip and keep your wing locked down with this reliable Factory Team upgrade.

Read more less

The Team Associated RC10B74.1 Factory Team "Carbon" Gearbox is an optional upgrade for the Team Associated RC10B74.1 series models. These carbon fiber composite option parts are impregnated with rigid and light carbon fibers inside the injection molded material to create a lighter, more durable part with optimized rigidity to create the ultimate high performance composite part. Package includes the upper and lower gearbox pieces that can be used in the front or rear position.Features: Lightweight: Approximately 12% weight savings over “hard” material. Extreme Rigidity: More predictable handling in high traction applications and increased vehicle stability in fast corners. Improved Durability: Significantly improved strength over “hard” option parts. COMPATIBILITY: Team Associated RC10 B74.1Team Associated RC10 B74.1D

Read more less

Team Associated Rear Hubs Set – RC10B74.1 OEM Replacement for Precision Rear-End Handling The ASC92267 Rear Hubs are a direct replacement for the Team Associated RC10B74.1 and B74.1D 1/10 scale 4WD electric buggies. Built to factory specs, these hubs restore precise suspension geometry and consistent rear-end performance. ⚙️ Features: 🏁 Genuine Team Associated replacement part 🛠️ Maintains proper rear toe and camber link geometry 💪 Durable molded construction for reliable wear resistance 📦 Includes: (1) Left Rear Hub (1) Right Rear Hub ✅ Compatibility: Team Associated RC10B74.1 Team Associated RC10B74.1D Stay dialed and race-ready—replace worn or damaged hubs with confidence.  

Read more less

Get pro-level precision and durability with the Team Associated Factory Team Metric Hex/Nut Driver Tool Set. Designed for serious RC enthusiasts, this premium 5-piece set delivers a perfect balance of lightweight comfort, accuracy, and long-lasting performance. Each tool features a color-coded aluminum handle for quick identification, while the precision-machined steel tips ensure a perfect fit on every screw and nut — reducing wear and rounding. Whether you’re working on your Team Associated buggy, touring car, or crawler, this kit provides all the essential sizes you need to handle standard metric hardware with confidence and style. ⚙️ Features: Precision-machined steel tips for perfect hardware engagement Lightweight aluminum handles with color-coded end caps for quick size ID Sure-grip knurled design for comfort and control during long wrenching sessions Replacement tips available for long-term usability Perfect for use on all Team Associated vehicles and other 1/10–1/8 scale RCs 📏 Includes: (1) 1.5mm Hex Driver (1) 2.0mm Hex Driver (1) 2.5mm Hex Driver (1) 5.5mm Nut Driver (1) 7.0mm Nut Driver 🧰 Specifications: Part Number: 1519 Handle Material: Aluminum Tip Material: Hardened Steel Grip Type: Knurled Sure-Grip 💡 Pro Tip:Pair this set with the Factory Team Tool Bag or JConcepts Pit Storage Box to keep your workspace organized and your tools protected between race days.

Read more less

Sharpen Your Steering. Increase Stability. Go Faster. Dial in front-end precision with the Team Associated RC10T7/RC10SC7 Front Anti-Roll Sway Bar Set — a must-have tuning upgrade for racers looking to reduce chassis roll, increase steering consistency, and fine-tune handling for any surface. Whether you're running high-grip carpet, loose dirt, or rough outdoor terrain, this sway bar set helps keep the front of your truck planted and predictable where it matters most. About the Sway Bar Set Versatile Tuning for Any Track The Front Anti-Roll Sway Bar Set gives you multiple bar thickness options so you can tailor front-end stability to match your track conditions and driving style. ✔ Thicker bar = more stability, smoother steering✔ Thinner bar = more steering rotation This lets you quickly tune steering response, reduce traction rolling, and achieve a balanced, confidence-inspiring setup. Features Three sway bar sizes for fine-tuned handling Reduces chassis roll for improved front-end consistency Boosts steering stability on tight, loose, or bumpy tracks A must-have in any race-day tuning kit Direct fit for RC10SC7 and RC10T7 platforms Includes (1) Front Anti-Roll Sway Bar Set (multiple bar thicknesses)

Read more less

Fine-Tune Your Handling. Maximize Your Grip. Unlock next-level stability with the Team Associated RC10T7/RC10SC7 Rear Anti-Roll Sway Bar Set — the go-to tuning upgrade for racers who demand consistency, balance, and improved cornering on any surface. Whether you're on tight indoor carpet, loose dirt, or bumpy outdoor tracks, this sway bar set helps control chassis roll to keep your truck flatter, more predictable, and faster through every section. About the Sway Bar Set Precision Tuning Made Easy Designed specifically for the RC10T7 and RC10SC7 platforms, this rear sway bar set gives you multiple bar thicknesses to fine-tune how much the rear end stays planted.More resistance = more stability.Less resistance = more rotation.Choose the perfect feel for your track and driving style. A must-have item for racers looking to get the most out of the Team Associated 1/10 4x4 trucks. Features Three sway bar sizes for precise tuning Reduces chassis roll for improved consistency Increases cornering balance and steering predictability Works on tight, loose, and bumpy tracks Perfect for any racer’s tuning bag Direct fit for RC10SC7 and RC10T7 platforms Includes (1) Rear Sway Bar Set (multiple bar thicknesses)

Read more less

Overview:Upgrade your TC8’s precision and performance with the 1UP Racing Aluminum DirectHex Hub Axles — the ultimate solution for racers who demand accuracy, strength, and zero slop in every corner. About the Aluminum DirectHex Hub AxlesExpertly CNC-machined from high-grade 7075 aluminum, these DirectHex axles feature a true hex interface that completely eliminates the play and inconsistency of clamping-style hubs. The lightweight design reduces rotating mass, while the durable black anodized finish and laser-etched markings give a clean, professional look. Each set includes premium 6x10x3 Cv2 Pro bearings and o-rings for smooth operation and reliable fitment. Features: True hex interface — zero slop, no clamping distortion Precision-machined from 7075-T6 aluminum for strength and low weight Black anodized finish with laser-etched 1UP logo and hex size Includes premium 6x10x3 Cv2 Pro bearings Available in 4 mm, 5 mm, and 6 mm offsets for fine-tuned handling Four o-rings included for secure, consistent installation Race-proven design for the Team Associated TC8 platform Includes: (2) Team Associated TC8 Aluminum DirectHex Hub Axles (5 mm Offset)

Read more less

Fine-tune your gearing with the Team Associated 48 Pitch, 69 Tooth Spur Gear. This optional upgrade offers smooth, efficient power transfer and allows racers to dial in the perfect gear ratio for their setup. 🔥 Key Features: Precision-molded 48 pitch, 69 tooth spur gear Provides smooth, efficient drivetrain performance Optional tuning part for gearing adjustments Genuine Team Associated quality for durability and accuracy ✅ Compatibility: Team Associated Apex Team Associated TC5 Team Associated TC6.1 Team Associated TC6.2 Team Associated TC7 (Original) Team Associated TC7.1 Team Associated TC7.2 📦 Includes: (1) 48P Spur Gear (69T) ⚠️ Tip:Pair with the right pinion gear to optimize top speed vs. acceleration for your track conditions.  

Read more less

Power your race machine with the Reedy Zappers HV SG6 Ultra Low Profile 2S LiPo Battery. Built for the demands of competitive RC, this pack delivers lightning-fast discharge, superior voltage retention, and rock-solid durability to keep you at peak performance lap after lap. ✅ Ultra Low Profile Design – Lowers center of gravity for sharper handling✅ 135C High Discharge Rating – Delivers extreme power output for racing applications✅ Flat Discharge Curve – Maintains consistent voltage through the entire run✅ State-of-the-Art Chemistry – Reduced internal resistance and improved cycle life✅ Meets Racing Standards – Built to ROAR, EFRA, BRCA, and IFMAR specifications Includes: (1) Zappers HV SG6 2S Ultra Low Profile 135C LiPo Battery (7.6V/6000mAh) 5mm Bullet Connectors Specifications: Nominal Voltage: 7.6V (2S HV LiPo) Capacity: 6000mAh Maximum Charge Rate: 2C (12A) Discharge Rate: 135C Peak Cell Configuration: 2S2P Watt Hours: 45.6Wh Connector: 5mm Bullet (battery), 2mm Bullet (balance) Dimensions (LxWxH): 139 x 47 x 19.5mm (5.47 x 1.85 x 0.77in) Weight: 247g (8.71oz) ROAR Approved: Yes ⚡ Take your racing to the next level with reliable power, ultra-low profile design, and championship-ready performance.

Read more less

Dial in your suspension with Team Associated’s Factory Team 13mm shock pistons. The #91933 set features 2x1.7mm holes with a 2.5mm thick profile, providing a great tuning option for refining pack and rebound on modern high-performance off-road tracks. 📦 Includes: (2) FT 13mm Shock Pistons – 2x1.7mm hole layout 2.5mm thick ⚙️ Key Features: CNC-machined for ultra-precise damping consistency Designed for 13mm shock bodies used on AE’s latest platforms Ideal for high-traction surfaces needing tighter shock control Compatible with RC10B6.4, RC10B74.2, and similar vehicles 📌 Tuning Tip: Use 2x1.7mm pistons to increase damping over 2x1.8mm, providing more pack and control in bumpy or high-speed corners.

Read more less

Overview:Secure your rear wing with confidence using the Team Associated RC10B84 Wing Mount Set. Designed for strength and precision, this set provides the perfect fit to keep your wing stable under high loads and during hard landings. A must-have replacement or upgrade to ensure consistent aerodynamics and handling for your B84 buggy. Features: Complete rear wing mount set for the RC10B84 Strong molded construction for durability Maintains wing stability and aero balance under race conditions Genuine Team Associated factory part for perfect fit Compatibility: Team Associated RC10B84 1/10 4WD Buggy Includes: (1) Wing Mount Set (all required mounting components) Part Number: 92506 ⚡ Pro Tip: Pair this with the Factory Team adjustable wing (92366) to fine-tune downforce and stability for different track conditions.

Read more less

Team Associated RC10B84 Body – Clear (92554) 🏁 Race-Optimized Replacement – Designed specifically for the RC10B84 platform, this low-profile clear body delivers improved aerodynamics and the clean, aggressive Factory Team look. Perfect for racers who want both performance and a fresh canvas for custom paint schemes. ⚙️ Features:✅ Low-profile design for enhanced aerodynamics✅ Molded from durable, lightweight polycarbonate✅ Clear shell – ready for your custom paint job✅ Factory Team fit and finish for competitive racing 📦 Includes: (1) Clear RC10B84 Body (unpainted) 🔧 Compatibility: Team Associated RC10B84 💡 Pro Tip: Pair this body with lightweight wing options to further dial in downforce and stability for your track conditions.    

Read more less