The Team Associated RC10B74 Front Suspension Arm Set is a genuine OEM replacement designed to restore the handling and durability of your buggy. Precision-molded from high-quality composite, these arms are built to withstand the demands of competitive racing. ✅ Durable Composite Construction – Strong and lightweight for racing performance✅ Direct OEM Replacement – Genuine Team Associated parts for perfect fit✅ Precision Fitment – Maintains proper suspension geometry and handling Includes: (1) Front Suspension Arm Set (left & right) Compatibility: Team Associated RC10B74 series buggies (RC10B74, B74.1, B74.1D, B74.2, B74.2D) Check your manual for exact fitment Part #: 92128

Read more less

Reedy Flat Sensor Wire (150mm) – ASC96980Keep your electronics tidy and your setup dialed with this Reedy Flat Sensor Wire. Originally included with Reedy Sonic motors, these high-quality flat wires are now available separately to fit your custom build needs. The flat design not only looks sleek but also makes routing easier and cleaner in tight spaces. Ideal for both 1/10 and 1/8 scale applications. 📏 Length: 150mm💡 Available in sizes from 70mm to 270mm ✅ Perfect for: Cleaner wiring layout Reedy Sonic motors and other ROAR-approved ESC/motor combos OEM Part #: ASC96980

Read more less

Team Associated 3x23mm V2 Chrome Screw Mount Front Shock Shaft Smooth Performance. Race Proven. Upgrade your front suspension with the Team Associated 3x23mm V2 Chrome Screw Mount Front Shock Shafts. Designed for precision and durability, these chrome-coated shafts reduce friction and wear for smooth, consistent shock action. Perfect for racers running the B6 and B64D platforms, these shafts are a direct replacement and include the required mounting hardware for a hassle-free install. 🔩 Features: 🔧 V2 Chrome Finish – Reduces friction and enhances shock performance 🛠️ Screw Mount Design – Reliable and secure installation 🚗 Vehicle Compatibility – Fits Team Associated B6 and B64D models 📦 Complete Kit – Includes two shock shafts and mounting hardware 📦 Includes: (2) 3x23mm V2 Chrome Screw Mount Front Shock Shafts (1) Mounting Hardware Set Keep your suspension running smooth and race-ready—upgrade to Team Associated quality.

Read more less

Team Associated RC10B6.2 Rear Suspension Arm, 73mm (91885)Upgrade or replace your buggy's rear end with this 73mm rear suspension arm designed for the RC10B6.2. Engineered for optimal durability and race-ready performance, it's a direct replacement part that keeps your handling sharp and consistent. ✅ Official Replacement – For the RC10B6.2✅ 73mm Length – Ideal for specific tuning setups✅ Durable Composite Material – Built to handle high-impact racing✅ Precision Molded – Ensures consistent fit and suspension geometry 📦 Includes:– (1) Rear Suspension Arm, 73mm Perfect for spares or to replace a worn or damaged arm. Get your buggy dialed in and back on track!

Read more less

Restore precision steering to your B6.4 or B6.4D with this genuine Team Associated replacement set. The kit includes two steering bell cranks and a steering rack, designed to keep your front-end dialed in and race-ready. 🔧 Features: Direct replacement for the RC10B6.4 and B6.4D Includes (2) bell cranks and (1) steering rack Durable, race-proven design ✅ Compatibility: RC10B6.4 RC10B6.4D Ideal for racers who want tight, responsive steering and long-lasting performance.

Read more less

Team Associated Rear Body, Wing & Fan Mount Set w/ Bumper – RC10B74.2 Complete Rear-End Hardware Refresh for B74.2 & B74.2D Restore factory fit and performance with this genuine replacement mount set from Team Associated. Designed for the RC10B74.2 and B74.2D platforms, this kit includes everything needed to secure the rear body, wing, and cooling fan—plus the rear bumper for extra protection. 🔩 Features: 🔧 Factory-spec replacement for easy installation 💨 Fan mount helps improve ESC cooling 🪶 Includes wing spacer and washers for secure aero setup 🛡️ Rear bumper adds protection without extra weight 📦 Includes: (1) Rear Body Mount (2) Wing Mounts (1) Wing Spacer (2) Wing Washers (1) Fan Mount (1) Rear Bumper ✅ Compatibility: Team Associated RC10B74.2  Team Associated RC10B74.2D

Read more less

Team Associated Arm Mount Inserts – ASC92014🔧 Fine-Tune Your Geometry with Precision Inserts Dial in your suspension setup with these official Team Associated Arm Mount Inserts. Designed as direct replacements for the RC10 B6 and B6D platforms, this set gives you a range of tuning options to adjust toe and anti-squat settings—so you can hit your marks on any track. ✅ Factory fit for B6 & B6D vehicles✅ Adjust toe and squat for maximum cornering control✅ Durable and lightweight composite construction 📦 Includes:• (4) Inserts – 0, 0• (4) Inserts – 0, 0.35• (4) Inserts – 0, 0.7• (4) Inserts – 0.35, 0.35 🔢 Part Number: ASC92014🏁 Brand: Team Associated

Read more less

Team Associated 10mm Heavy Duty Ballstud Set (8) [91049]🔧 Tough Where It Counts!The Team Associated 10mm Heavy Duty Ballstud Set is built for strength and reliability. Perfect for high-performance applications, these ballstuds offer the durability you need to keep your suspension tight and responsive under stress. Ideal for SC10 4x4, B5, and B5M platforms. 🛠 Features:✅ Heavy-duty construction for demanding RC action✅ Designed for precision fit and consistent performance✅ 10mm length—perfect for a wide range of setups✅ Trusted Team Associated quality 📦 Includes:(8) 10mm Heavy Duty Ballstuds 🔥 Part Number: 91049🏁 Compatible With: SC10 4x4, B5, B5M

Read more less

Team Associated SC6.1 Front Bumper & Nerf Bars [71124] 🛡️ Toughen up your short course rig! This Team Associated SC6.1 Front Bumper & Nerf Bars set is the direct replacement for your SC6.1. Whether you're rebuilding after a bash or just want fresh hardware, this kit has what you need to keep your truck protected and track-ready. ✅ Durable factory replacement parts✅ Designed for precise fit on the SC6.1✅ Adds rugged front-end protection and side impact resistance Includes:(1) Front Bumper(1) Bumper Brace(2) Nerf Bars 📦 Part Number: 71124🏁 Brand: Team Associated

Read more less

Team Associated 13mm Front Shock Spring. These replacement springs are intended for the Team Associated B6.4, however, they will also work with the Team Associated B6.4D as a tuning option. Package includes two springs. Effects of Shock Spring Changes  Shock Spring  Characteristic  Softer Increased Chassis Roll Increased Traction Better in Bumpy Conditions More Likely to Bottom Out  Stiffer Decreased Chassis Roll Decreased Traction Increased Responsiveness COMPATIBILITY: Team Associated RC10B6.4Team Associated RC10B6.4D

Read more less

Team Associated 23mm Carbon Fiber Front Shock Tower – RC10B74.1 Lightweight. Strong. Race-Ready. The RC10B74.1 23mm Carbon Fiber Front Shock Tower is a precision-cut replacement part designed specifically for Team Associated B74.1 and B74.1D 1/10 scale 4WD buggies. Crafted from high-quality carbon fiber, it offers strength without the weight—essential for competitive performance. ⚙️ Features: 🪶 Lightweight carbon fiber construction 🛡️ Durable and race-proven material 📏 23mm shock mounting geometry for consistent front-end handling 📦 Includes: (1) 23mm Carbon Fiber Front Shock Tower ✅ Compatibility: Team Associated RC10B74.1 Team Associated RC10B74.1D Upgrade your buggy’s performance with official Team Associated components.

Read more less

Team Associated Factory Team RC10T6.2/SC6.2 3.5mm Titanium Turnbuckle Set. This is an optional titanium turnbuckle set intended for the Team Associated T6.2 and SC6.2 platforms. Constructed from high quality titanium these offer increased durability over stock components while shedding weight and replace all the stock turnbuckles. Package includes two titanium front camber links, two titanium rear camber links and two titanium steering links.NOTE: 3.5mm Ballcups are required for installation (ASC92308). COMPATIBILITY:   Team Associated RC10 SC6.2Team Associated RC10 T6.2 

Read more less

Dial in your rear suspension for maximum consistency and cornering performance with the Rear Anti-Roll Bar Set for the RC10T6.1. This tuning option reduces chassis roll and improves stability, especially on high-traction tracks or during aggressive cornering. 🔥 Key Features: Complete rear sway bar kit for tuning roll stiffness Includes multiple wire diameters for precise adjustment Reduces body roll and increases mid-corner control Factory-designed for a perfect fit on the RC10T6.1 Ideal for high-traction conditions and fine-tuning handling ✅ Compatibility: RC10T6.1 RC10T6.2 (compatible with minor setup adjustments) May also be compatible with other 1/10 AE trucks using similar rear suspension geometry 📦 Includes: (1) Mounting Hardware Set (3) Sway Bars (varied thicknesses) (2) Sway Bar Arms All required installation hardware ⚠️ Tip:Adjust sway bar stiffness based on track grip—thicker bars = less body roll, thinner bars = more rear grip.

Read more less

  Team Associated RC10 T6.1 Body Posts V2 (Part #71135)📦 Optional Upgrade – Durable. Versatile. Track-Ready. These Team Associated Body Posts V2 are a direct replacement for the RC10 T6.1 Stadium Truck, providing reliable body mounting and fitment. Whether you're replacing worn parts or upgrading your setup, these posts deliver factory precision and long-lasting durability. 🛠️ Originally designed for the T6.1, these body posts may also be compatible with newer Team Associated stadium trucks that share similar chassis designs. Always double-check fitment with your specific model. 🔧 Includes: (2) V2 Body Posts (2) Mounting Screws ✅ Features: Official Team Associated part #71135 Precision molded composite Direct fit for T6.1 – may fit T6.2 and SC6 series (confirm fitment) Strong and lightweight

Read more less

Team Associated RC10B6.2 Factory Team Carbon 75mm Rear Suspension Arms [91874] 💪 Lightweight. 💨 Rigid. 🏁 Race-Proven. Upgrade your RC10B6.2 with the Factory Team Carbon 75mm Rear Suspension Arms—built for racers who demand precision, strength, and speed. Crafted from ultra-rigid carbon material, these arms deliver sharper handling, improved durability, and better stability in high-traction conditions. ✅ 12% lighter than standard "hard" arms✅ Stronger and more durable than previous options✅ Improves high-speed stability and cornering control✅ Ideal for high-traction tracks✅ Direct Factory Team fit and finish Includes:(2) Carbon 75mm Rear Suspension ArmsPlastic Shims 📦 Part Number: 91874🔧 Brand: Team Associated🏎️ Compatible with: RC10B6.2

Read more less

Reedy B5 Flat Sensor Wire (125mm) – ASC96994Keep your electronics dialed and your wiring clean with the Reedy Flat Sensor Wire designed specifically for B5 series vehicles. At 125mm, it's a perfect fit for tight, compact setups where shorter wire runs are essential. The flat profile offers a streamlined look and hassle-free routing—ideal for racers looking to keep things tidy under the body. ✅ Designed for: RC10B5 / RC10B5M Fits most 1/10 ESC/motor setups 📏 Length: 125mm🧰 Flat wire for better cable management🔌 ROAR-legal sensor connection OEM Part #: ASC96994  

Read more less

Team Associated RC10B6.2 Rear Suspension Arm, 73mm   ASC91853

Read more less

🔧 Premium V2 Screw-Mount Front Shock ShaftsUpgrade your buggy's performance and durability with these Ti-Nitride coated 3x21mm shock shafts—built for smooth suspension action and long life! 💡 Key Features: Ti-Nitride coating reduces wear and improves shock performance Screw-mounted design keeps pistons secure NOT compatible with E-clip pistons 🔩 Includes:(2) Front Shock Shafts – 3x21mm ✅ Compatibility:Use with ASC91576 V2 shock bodies  

Read more less

Fine-tune the rear suspension of your RC10B6.3 with the Wide “C” Arm Mount from Team Associated. Made from high-quality aluminum for added strength and precision, this Factory Team upgrade delivers improved durability and consistent geometry for high-performance setups. 🔥 Key Features: Factory Team aluminum arm mount for increased rigidity Wide “C” mount geometry for specific rear pivot configurations CNC-machined for precise fit and performance Hard-anodized finish for wear resistance and professional look Perfect for racers needing a durable, race-ready upgrade ✅ Compatibility: RC10B6.3 RC10B6.3D Also fits other RC10B6-series vehicles using the wide C arm mount configuration 📦 Includes: (1) Aluminum Arm Mount C (Wide) ⚠️ Tip:Pair with the correct A/B/D mounts to achieve your desired anti-squat and toe-in settings.

Read more less

  Team Associated 3x27.5mm V2 Ti-Nitride Screw Mount Shock Shafts (2pcs) Durability Meets Precision. Upgrade your suspension with Team Associated’s V2 3x27.5mm Ti-Nitride Shock Shafts, engineered for ultra-smooth performance and long-lasting wear resistance. These shafts feature a screw-mount piston design—perfect for racers who demand consistency and reliability lap after lap. Compatible with specific buggy and truck shock bodies, these are a direct fit for serious performance upgrades. 🔩 Features: ✨ Ti-Nitride Coated – Hard coating increases wear resistance and reduces friction 🔧 Screw-Mount Design – Stronger and more secure piston mounting (no E-clips) 🚗 Vehicle Compatibility: Fits ASC91577 Buggy Rear Shock Bodies Fits ASC91578 Truck Front Shock Bodies ⚠️ Note: Not compatible with E-clip style pistons 📦 Includes: (2) 3x27.5mm V2 Ti-Nitride Screw Mount Shock Shafts Trust Team Associated components for reliable performance and race-ready precision.

Read more less

Fine-tune your RC10B6.4 with this comprehensive tuning and hardware set from Team Associated. The #91978 Factory Team accessory pack includes everything needed to install a front wing, fan mounts, and adjust your battery brace height—all in one convenient kit. 📦 Includes: (1) Front Wing Mount (2) Fan Mounts (1) Battery Brace Shim Necessary hardware ⚙️ Key Features: Direct fit for RC10B6.4 and RC10B6.4D models Optional tuning parts to optimize airflow, improve downforce, and enhance cooling Lightweight and durable composite materials Designed by Team Associated for maximum performance & reliability This kit is perfect for racers who want to dial in their setup for competitive advantage. Whether you're aiming for better aerodynamics or more efficient motor cooling—this set has you covered.

Read more less

  Precision and reliability come standard with the RC10B74 Steering Blocks from Team Associated. Designed for durability and consistent performance, these blocks are a direct fit for your RC10B74 front-end steering assembly. 🔧 Key Features: OEM replacement for stock steering blocks Molded composite construction for long-lasting strength Maintains factory geometry and performance Lightweight yet rugged design 📦 Includes: (2) Steering Blocks (left and right) ✅ Compatibility: Team Associated RC10B74 May fit other RC10B74 variants (consult manual for fitment) Restore your steering performance or keep a spare set in your pit bag—these steering blocks are an essential component for smooth, responsive control on the track.

Read more less

Team Associated RC10B7 Factory Team Carbon Gearbox – 92406Upgrade your RC10B7 or B7D with the Factory Team Carbon Laydown Gearbox. Built with carbon-infused material, this optional gearbox delivers enhanced rigidity and long-lasting durability. Ideal for racers chasing ultimate chassis stiffness and consistent power transfer. Note: Increased rigidity may reduce rear traction depending on track conditions. ✔️ Carbon-infused for superior stiffness and durability✔️ Designed for RC10B7 and RC10B7D 2WD buggies✔️ Laydown configuration for optimized weight distribution✔️ Genuine Factory Team performance part✔️ Includes: (1) Carbon laydown gearbox housing Built to handle high power with Factory Team precision. 🏁  

Read more less

Upgrade or replace with precision using the Team Associated RC10B6.4 Front Bulkhead Set, featuring both 0° and 2.5° kick-up options. This set is a direct replacement for the B6.4 front bulkhead and offers adjustability to fine-tune your front-end geometry depending on track conditions and driving style. 📦 Includes: (1) 0° Front Bulkhead (1) 2.5° Front Bulkhead 📌 Compatibility: Team Associated RC10B6.4 RC10B6.4D May also be compatible with other B6 series models with slight adjustments 🔧 Key Benefits: Multiple kick-up angles for tuning front-end response High-quality composite material for durability Factory Team precision fitment and finish Ideal for racers looking to customize handling feel on entry and through corners. Keep both angles on hand and swap as needed to match the track!

Read more less

Boost your buggy’s performance with this high-quality Factory Team Carbon Composite Laydown Gearbox and Chassis Braces set! Designed for racers looking to increase chassis rigidity and reduce unwanted flex, this upgrade delivers improved consistency, sharper handling, and enhanced tuning potential on high-grip surfaces. ✅ Key Features: Factory Team carbon composite construction for added durability and reduced flex Improves overall chassis response and driving precision Ideal for high-grip tracks where consistency is key Direct fit for RC10B6 platform—easy bolt-on performance upgrade 📦 Includes: (1) Laydown Gearbox (Carbon Composite) (2) Chassis Braces (Carbon Composite) 🔧 Compatibility: Team Associated RC10B6 Also compatible with RC10B6.1, B6.2, B6.3, and similar laydown setups Take your tuning to the next level with Factory Team precision—perfect for racers chasing every tenth!

Read more less

This is a pack of two replacement Team Associated RC10B74 Rear Hub Hinge Pins.  COMPATIBILITY: Team Associated RC10 B74 OriginalTeam Associated RC10 B74.1Team Associated RC10 B74.1DTeam Associated RC10B6.2Team Associated RC10B6.2D

Read more less

Upgrade your drivetrain with the Team Associated Factory Team 11mm Octalock LCF Slipper Pad. Originally launched with the RC10B74.1 buggy, this pad is designed to work with Octalock spur gears and offers smoother, more consistent slipper performance. It also serves as an optional upgrade for the original RC10 B74 series. ✅ Factory Team Performance – Designed for competitive precision and durability✅ Octalock Compatible – Works with Team Associated Octalock spur gears✅ Optional Upgrade – Updates older B74 models to the latest slipper assembly✅ Race Proven – Trusted by Team Associated drivers worldwide Compatibility: Team Associated RC10 B74 (original) Team Associated RC10 B74.1 Team Associated RC10 B74.1D A must-have for serious racers, the 11mm Octalock LCF Slipper Pad keeps your buggy smooth, efficient, and race-ready.

Read more less

Team Associated Rear Suspension Arms: RC10B74   ASC92130

Read more less

Team Associated RC10B7 Factory Team Carbon Top Plate & Ballstud Mount Set – Eliminate Flex, Maximize Control! 🏁 Upgrade your chassis stiffness and tuning precision with the Factory Team Carbon Top Plate & Ballstud Mount Set for the RC10B7 and RC10B7D. Constructed from Team Associated’s renowned carbon composite material, this lightweight set reduces unwanted flex on high-bite tracks while improving steering consistency and front-end response. ⚙️ Key Features: ✅ Premium carbon composite construction for lightweight durability✅ Reduces chassis flex for consistent handling on high-traction surfaces✅ Improves steering precision and chassis response✅ Perfect for racers looking to fine-tune front-end stiffness✅ Genuine Team Associated Factory Team option part 📦 Includes: (1) Carbon Top Plate (1) Carbon Ballstud Mount ✅ Compatibility: Team Associated RC10B7 Team Associated RC10B7D 🔥 Dial in your front-end tuning with this high-performance Factory Team upgrade from Team Associated! 🏆🔧

Read more less

Team Associated RC10B7 Front Anti-Roll Sway Bars (5) [92459] 🌀 Precision in the Front, Grip in the Back!Upgrade your front-end handling with the Team Associated RC10B7 Front Anti-Roll Sway Bar Set. Whether you're fighting traction roll or just fine-tuning your buggy for max consistency, this 5-pack of sway bars gives you the tuning range you need to dominate any surface. Built for the RC10B7 and B7D platforms—just swap, test, and race! 🔧 Key Features:✅ Five sway bar options for ultimate front-end tuning🔄 Designed specifically for RC10B7 and B7D🎯 Helps maintain front grip and stability through corners🏁 Race-proven setup flexibility 📦 Includes:(5) Front Anti-Roll Sway Bars 🔩 Part Number: 92459🛠️ Compatible With: Team Associated RC10 B7 Team Associated RC10 B7D

Read more less

Team Associated Factory Team Molded Ring & Pinion Gear Set – RC10B74.2 Lightweight. Durable. Race Proven. Upgrade your drivetrain with the ASC92318 Factory Team Molded Ring and Pinion Gear Set, specifically engineered for the RC10B74.2 and B74.2D platforms. Made from a high-strength composite, this optional gear set delivers a significant 13.5g weight reduction while maintaining durability—even in modified power setups. Perfect for racers running a center differential in 13.5T class and beyond, this setup helps shave weight without sacrificing performance. 🔩 Features: ⚙️ Molded high-strength composite construction 🏁 Optimized for 13.5T class with center diff — holds up to mod setups 💨 Up to 13.5g weight savings for improved efficiency 🔧 Easy drop-in fit for B74.2 series vehicles 🧴 Gasket included – Grease sold separately 📦 Includes: (1) Molded Ring Gear (1) Molded Pinion Gear (1) Gasket ✅ Compatibility: Team Associated RC10B74.2 Team Associated RC10B74.2D 💡 Tip: Use Associated Silicone Grease (ASC6636 – sold separately) for optimal gear protection and smooth operation.

Read more less

Fine-tune your chassis stiffness with the Team Associated RC10B6.4/B6.4D Factory Team Carbon Top Plate & Ball Stud Mount. This precision-crafted upgrade offers enhanced rigidity while allowing adjustable flex, giving racers more control over handling characteristics. Features: Carbon fiber construction for lightweight strength Adjustable top plate stiffness for fine-tuning handling Includes ball stud mount for secure, precise linkage connection Factory Team quality for professional-grade performance Compatibility: Team Associated RC10B6.4 Team Associated RC10B6.4D Includes: (1) Carbon Top Plate (1) Ball Stud Mount Perfect for competitive racers looking to dial in their chassis response and steering feel.

Read more less

This is a replacement Team Associated RC10B74 Hinge Pin Set. 

Read more less

Team Associated CVA/Wheel Hex Pin (4) [91436]🔩 Lock It Down with Precision!The Team Associated CVA/Wheel Hex Pin Set is your go-to solution for keeping your drivetrain tight and reliable. These precision steel pins are perfect replacements for connecting rear CVA axles and bones, or securing wheel hexes to both front and rear axles. 🛠 Features:✅ Durable steel construction✅ Perfect fit for CVA assemblies and wheel hexes✅ Essential for smooth, consistent performance 📦 Includes:(4) CVA/Wheel Hex Pins 🔥 Part Number: 91436🏁 Compatible with multiple Team Associated platforms

Read more less

Team Associated RC10B74.1/RC10B74.1D Factory Team LTC Plastic Differential Rebuild Set. This is an optional differential rebuild set intended for the RC10B74.1 and RC10B74.1D. This differential rebuild uses the updated LTC (Low Torque Capacity) gearset allowing for improved driveability and traction. The high tooth count on the gears makes for smoother differential action that won't lock on power. NOTE: Recommended starting diff oils for dirt and clay are 15k (ASC5447) front, 200k (ASC5461) center, 10k (ASC5455) rear. Recommended starting diff oils for carpet and Astro turf are 20k (ASC5456) front, 15k (ASC5447) rear. COMPATIBILITY: Team Associated RC10 B74.1Team Associated RC10 B74.1DTeam Associated RC10 B74.2Team Associated RC10 B74.2D

Read more less

Team Associated RC10B74.1 Anti-Roll Bar Set (1.8–2.0mm) – 92291🎯 Rear-End Mastery, Dialed to Perfection Step up your tuning game with this optional 1.8–2.0mm rear anti-roll bar set for your RC10B74.1 or B74.1D. Designed for racers who crave consistency and performance, this set lets you tweak rear-end roll stiffness to match track conditions with precision. 💡 Adjustment Effects:🔄 Softer = More rear roll, more rear grip, less front grip, less on-power steering🚀 Stiffer = Less rear roll, less rear grip, more on-power steering, quicker response in chicanes 💪 Key Features:✅ Includes 1.8mm, 1.9mm, and 2.0mm sway bars✅ Increases tuning flexibility for race-day perfection✅ Precision fit for RC10B74.1 and B74.1D buggies 🔧 Includes:• (1) 1.8mm Sway Bar• (1) 1.9mm Sway Bar• (1) 2.0mm Sway Bar 📦 Part Number: 92291🏁 Brand: Team Associated

Read more less