Team Associated 3.5mm Ballcups – Precision Fit for B74.2 Series! 🔩 Keep your suspension smooth and responsive with the Team Associated 3.5mm Ballcups, designed specifically for RC10 B74.2 and B74.2D vehicles equipped with 3.5mm turnbuckles. These are genuine Team Associated replacement parts engineered for durability and consistent fitment under high-stress racing conditions. ⚙️ Key Features: ✅ Direct replacement for worn or damaged ballcups✅ Includes 12 straight and 2 offset ballcups for full coverage✅ Designed for 3.5mm turnbuckles✅ Durable molded construction for long-lasting performance✅ Easy install with precision fitment for your Team Associated buggy 📦 Includes: (12) Straight 3.5mm Ballcups (2) Offset 3.5mm Ballcups (1) Ballcup Parts Tree ✅ Compatibility: Team Associated RC10 B74.2 Team Associated RC10 B74.2D 🔧 Maintain peak steering and suspension performance with these factory-spec Team Associated 3.5mm Ballcups! 🏁💪

Read more less

Team Associated B6 Hinge Pin Set [91670]🔩 Keep It Tight, Keep It Right!Replace worn or bent hinge pins with the Team Associated B6 Hinge Pin Set, designed specifically for the RC10 B6 and B6D buggies. This complete set ensures your suspension arms stay securely in place, delivering the smooth and precise movement needed for peak performance on the track. 🔧 Features:✅ Includes front & rear, inner & outer hinge pins✅ Direct replacement for factory parts✅ Built to Team Associated’s precision standards✅ Perfect for maintenance or full rebuilds 📦 Includes:(1) Complete Hinge Pin Set 🔥 Part Number: 91670

Read more less

Team Associated FT Aluminum Clamping Servo Horn – 25T / 15.5mm – Part 1370Compact. Strong. Precision Steering. The Team Associated Factory Team 15.5mm Clamping Servo Horn (1370) is a lightweight, high-strength upgrade for 25T spline servos from Futaba, Savox, ProTek, and others. Designed for tighter builds or where quicker steering response is needed, this 15.5mm horn provides durable performance with reduced leverage for smoother control and less servo wear. ✅ Machined 7075 T6 aluminum – rigid and race-ready✅ Short 15.5mm length – for reduced load and quicker response✅ Clamping-style mount – added security and reduced play✅ Laser-etched spline marking – easy identification✅ Fits 25T spline servos – Futaba, Savox, ProTek, Reedy, and more 📦 Includes: (1) 15.5mm Aluminum Clamping Servo Horn (25T) (1) M2.5 Clamp Screw Part #: 1370 💡 Pro Tip: Great choice for 1/10 scale buggies, touring cars, or any build where space is limited and servo precision matters.

Read more less

Team Associated RC10B6.4 -1mm Scrub Caster & Steering Blocks – ASC91901🛞 Precision Steering Just Got an Upgrade Fine-tune your front-end handling with the Team Associated -1mm Scrub Caster & Steering Block set for the RC10B6.4 and B6.4D! Whether you're chasing max steering feel or dialing in a tighter line through corners, this kit delivers the flexibility you need. The included caster inserts let you tweak your setup in seconds, giving you full control over how your buggy handles on any track. ✅ Designed specifically for B6.4 and B6.4D✅ Adjustable camber with multiple caster insert options✅ Lightweight and durable AE factory-grade components✅ Great for high-traction tuning or steering sensitivity adjustments 📦 Includes:• (2) Caster Blocks• (4) Steering Blocks• (2) +/- 0° Caster Inserts• (2) +/- 2.5° Caster Inserts• (2) +/- 5° Caster Inserts• (2) Shims 🔢 Part Number: ASC91901🏁 Brand: Team Associated

Read more less

Upgrade or replace your buggy’s diff with the Team Associated B6.1/B6.1D Gear Differential Kit — engineered for smooth, consistent power delivery and long-lasting performance. Features: Complete kit with all parts needed to build one high-quality gear differential Designed for precision fit and smooth operation in B6.1 and B6.1D models Durable materials built to withstand competitive racing demands Includes: All gears, seals, outdrives, and hardware for one complete gear diff Perfect for racers looking for reliable performance and tunability on any surface. Team Associated RC10B6.3Team Associated RC10B6.3DTeam Associated RC10B6D

Read more less

Team Associated Factory Team 15.5mm Aluminum 25 Tooth Servo Horn. This is an optional servo horn designed for the RC10 B6 and B6D 1/10 buggies. 25T fits Futaba, ProTek, Savox and most other 25T servos. COMPATIBILITY: Team Associated RC10 B6 Team Associated RC10 B6.1 Team Associated RC10 B6.1 Factory Lite Team Associated RC10 B6.1D Team Associated RC10 B6.2 Team Associated RC10 B6.2D Team Associated RC10 B6D Team Associated RC10 SC6.1

Read more less

Team Associated RC10B6.4 13mm Shock Rod End Set [91997] 🔧 Small Part. Big Performance. 💥 Keep your suspension dialed with the 13mm Shock Rod End Set for the RC10B6.4. Whether you're replacing worn parts or fine-tuning your ride, these rod ends are built to factory spec and ready to race. ✅ Designed for 13mm shocks✅ Precision fit for smooth performance✅ Durable molded construction✅ Perfect for rebuilds or spares Includes:(1) 13mm Shock Rod End Set 📦 Part Number: 91997🔧 Brand: Team Associated🏁 Fits: RC10B6.4 & B6.4D platforms

Read more less

  Keep your suspension tight and responsive with the Team Associated B6 Ballcups. These molded plastic ballcups are designed for smooth operation and long-lasting performance, making them a must-have maintenance item or upgrade for your buggy. Features: Durable molded composite construction Provides a secure and smooth fit on ball studs Helps maintain precise suspension and steering geometry Replacement or spare set for your pit bag Includes:(12) Ballcups Compatibility: RC10B6 RC10B6D RC10B6.1 / B6.1D RC10B6.2 / B6.2D RC10B6.3 / B6.3D RC10B6.4 / B6.4D  

Read more less

Elevate your buggy’s precision with rugged carbon fiber strength. The gullwing design enhances rigidity and adjusts preload handling, giving you sharper steering, better consistency, and upgraded durability—especially suited for high-grip surfaces. ✅ Key Features: Lightweight carbon fiber construction for maximum stiffness and minimal flex Gullwing shape for enhanced shock mounting geometry and tuning versatility Bolt-in upgrade for sharper turn-in and better bump handling Reduces chassis flex under braking and steering loads 📦 What's Included: (1) Carbon Fiber Gullwing Front Shock Tower 🔧 Compatibility: Designed to fit all the following Team Associated 1/10 4WD buggy chassis: RC10B6 Original RC10B6.3 / B6.3D RC10B6.4 / B6.4D RC10B6D Upgrade your front-end with pro-level shock positioning and reliable strength—perfect for high-level club racers and serious competitors.  

Read more less

Team Associated Factory Team Low Friction X-Rings (8) [91493]🧪 Smoother Shocks. Better Performance.Upgrade your suspension with Team Associated Factory Team Low Friction X-Rings! Designed to reduce stiction and improve sealing, these high-performance shock seals help deliver ultra-smooth shock action and increased durability. 🔧 Features:✅ Low friction design for enhanced suspension response✅ Superior sealing to keep oil in and grit out✅ Perfect for racers demanding consistency and control✅ Genuine Team Associated Factory Team parts 📦 Includes:(8) Low Friction X-Rings 🔥 Part Number: 91493

Read more less

Team Associated B6.1/B6.1D Caster & Steering Block Set (91776)Keep your front end tight and precise with this replacement caster and steering block set from Team Associated. Originally designed for the B6.1 and B6.1D buggies, this set also works great for compatible short course and stadium trucks like the SC6.1 and T6.1. ✅ Direct Replacement – For B6.1/B6.1D buggies✅ Multi-Platform Compatibility – Also fits SC6.1 and T6.1✅ Durable Construction – Built for precision and performance✅ OEM Fit – Ensures smooth steering and proper caster geometry 📦 Includes:– (1) Left Caster Block– (1) Right Caster Block– (1) Left Steering Block– (1) Right Steering Block Perfect for rebuilds, spares, or freshening up your front-end setup before the next race.

Read more less

Team Associated 13mm Rear Shock Spring. These optional springs are intended for the Team Associated B6.4D and the B6.4. Package includes two springs. Effects of Shock Spring Changes  Shock Spring  Characteristic  Softer Increased Chassis Roll Increased Traction Better in Bumpy Conditions More Likely to Bottom Out  Stiffer Decreased Chassis Roll Decreased Traction Increased Responsiveness COMPATIBILITY: Team Associated RC10B6.4Team Associated RC10B6.4D

Read more less

Team Associated SC6.1 Body Mount Set – Part 71123Secure Fit. Factory Fresh. The Team Associated SC6.1 Body Mount Set (71123) is a complete replacement front and rear body mount kit for your SC6.1 short course truck. Whether you're rebuilding after a crash or refreshing your body mounting system, this kit provides everything needed for a secure and adjustable fit. ✅ Fits Team Associated SC6.1 short course trucks✅ Includes front and rear body mount braces✅ Adjustable body posts for custom body height✅ All necessary hardware included✅ OEM replacement for easy installation 📦 Includes: (1) Front Body Mount Brace (1) Rear Body Mount Brace (Body Posts + Mounting Hardware) Part #: 71123 💡 Pro Tip: For added body security, pair with reinforced body washers or foam pads to reduce post wear.  

Read more less

Team Associated RC10T6.2 Factory Team Carbon Front "Gullwing" Arms [71139] 💪 Stronger. Lighter. Faster. Take your RC10T6.2 to the next level with Factory Team Carbon Front "Gullwing" Arms. Engineered with lightweight carbon fiber composites, these arms deliver extreme rigidity and improved handling on high-traction tracks—giving you the edge when it counts. 🔥 Features:✅ Approx. 12% weight savings over “hard” material✅ Ultra-rigid for more predictable handling in high-traction conditions✅ Significantly stronger than standard options✅ Designed for gullwing-style front suspension setups 📦 Part Number: 71139🏁 Brand: Team Associated

Read more less

  Team Associated 5.5x2.0mm Aluminum Ball Stud Washers – Blue (10) – Part 31383Stack Smart. Tune Precisely. Perform Better. The Team Associated 5.5x2.0mm Blue Aluminum Ball Stud Washers (31383) are essential for precise suspension tuning on your 1/10 scale vehicles. With a clean anodized finish and a small outside diameter, these washers are commonly used in on-road applications but work perfectly for off-road as well. ✅ Pack of 10 lightweight aluminum washers✅ 5.5mm outer diameter / 2.0mm thickness✅ Blue anodized finish – clean, race-inspired appearance✅ Perfect for adjusting ball stud height, roll center, and link angles✅ Ideal for both on-road and off-road 1/10 scale platforms 📦 Includes: (10) 5.5x2.0mm Blue Aluminum Ball Stud Washers Part #: 31383 💡 Pro Tip: Mix with other thicknesses to fine-tune geometry without over-adjusting a single point.  

Read more less

Overview:Keep your shocks and O-rings performing their best with Team Associated Factory Team Green Slime. This silicone-based grease conditions and protects shock O-rings, preventing swelling and tearing while reducing friction. The result is smoother shock action, longer O-ring life, and more consistent suspension performance. Features: Specially formulated silicone grease for shock O-rings and seals Prevents O-ring swelling, tearing, and leaking Reduces friction for smoother, more consistent shock performance Extends the life of seals and improves durability Easy-to-apply formula in a convenient container Trusted Factory Team product for racers and hobbyists alike Compatibility: Works with all RC shock absorbers using silicone O-rings Suitable for Team Associated vehicles and other brands Includes: (1) Container of Factory Team Green Slime Part Number: 1105 ⚡ Pro Tip: Apply a small amount of Green Slime to O-rings and seals whenever rebuilding your shocks—it’ll save you from leaks and keep your suspension feeling silky smooth longer.

Read more less

Add front-end strength and forward weight bias with this 10g Factory Team aluminum bulkhead for the RC10B6 series. Machined from high-quality aluminum and anodized for durability, it’s the perfect upgrade for racers seeking improved handling on high-traction tracks. 🔥 Key Features: CNC-machined aluminum construction for added strength Weighs 10 grams to shift weight forward for better cornering Factory Team part for pro-level durability and performance Hard-anodized finish resists wear and corrosion Direct fit replacement for the stock plastic bulkhead ✅ Compatibility: RC10B6 / B6.1 / B6.2 / B6.3 RC10B6D / B6.1D / B6.2D / B6.3D May also fit SC6 and T6 series vehicles with shared front-end geometry 📦 Includes: (1) 10g Aluminum Front Bulkhead ⚠️ Tip:Consider pairing with additional brass or aluminum weight tuning components for a fully balanced setup.

Read more less

Team Associated 12mm Big Bore V2 Machined Shock Spacers – Part 91494Precision Fit. Smooth Travel. Race-Ready Performance. The Team Associated 12mm Big Bore V2 Machined Shock Spacers (91494) are direct replacements for the RC10 B6 and B6D buggies. These machined components ensure precise shock shaft alignment and optimal sealing, helping your suspension perform consistently under race conditions. ✅ Fits RC10 B6, B6D, and other 12mm Big Bore V2 shocks✅ Machined for accuracy and long-lasting durability✅ Includes shock shaft guides and seal cartridge spacers✅ Supports four full shocks✅ Essential for maintaining smooth and consistent shock performance 📦 Includes: Complete Set of Shock Shaft Guides Seal Cartridge Spacers (for 4 shocks) Part #: 91494 💡 Pro Tip: Replacing shock spacers and guides during a rebuild helps eliminate leaks and restores full suspension responsiveness.

Read more less

  JConcepts brings aggressive style and high performance to the stadium truck class with the Finnisher body. Designed as a drop-on fit for the Team Associated T6.1, T6.4, and Yokomo YZ2-T, this body features a cab-forward layout, raked windshield, and signature performance lines. The updated hood scoop provides added clearance for unique geometry setups while smoothing front downforce. Built-in air escape channels allow racers to tune for optimal performance in outdoor conditions. Whether your shocks are mounted in front or behind the tower, this body has you covered. Includes a high-performance Gurney spoiler (#0147) to boost rear grip and improve overall balance. ✅ Features: JConcepts original Finnisher design Drop-on fit for T6.1, T6.4, and YZ2-T Cab-forward, low-profile styling Includes Gurney spoiler (#0147) Built-in air escape passages Clear polycarbonate with overspray film Includes window masks & decal sheet 📦 Body comes clear and requires painting.

Read more less

Team Associated RC10B6 Pre-Cut 7" Wide Buggy Wing – ASC91998 Increased Downforce & Stability for 1/10 Buggies Upgrade your RC10B6 with this pre-cut 7" wide buggy wing and experience enhanced high-speed cornering and rear stability. Designed to deliver more downforce than the standard 6.5" wing, this wider version excels on low grip tracks and sweeping turns. ⚙️ Features: ✅ 7" Width – More surface area for increased rear downforce ✅ Pre-Cut Design – Ready to mount, no trimming needed ✅ Improved Stability – Optimized for high-speed turns and loose surfaces ✅ Durable Lexan Material – Lightweight and race-proven 📦 Includes: (1) Clear Pre-Cut 7" Wing ✅ Compatibility: Team Associated RC10B6 May fit other 1/10 buggies requiring a 7" wing (modification may be needed) 🛠 A great tuning aid for racers looking to boost corner speed and traction on loose or high-speed layouts.

Read more less

Team Associated 13mm Front Shock Spring. These optional springs are intended for the Team Associated B6.4D and the B6.4. Package includes two springs. Effects of Shock Spring Changes  Shock Spring  Characteristic  Softer Increased Chassis Roll Increased Traction Better in Bumpy Conditions More Likely to Bottom Out  Stiffer Decreased Chassis Roll Decreased Traction Increased Responsiveness COMPATIBILITY: Team Associated RC10 B74.2Team Associated RC10 B74.2DTeam Associated RC10B6.4Team Associated RC10B6.4D

Read more less

Team Associated 6mm Heavy Duty Ballstud Set (8) – Part 91047Stronger Threads. Smoother Movement. Built for Racing. The Team Associated 6mm Heavy Duty Ballstud Set (91047) is a direct replacement for worn or damaged ballstuds on vehicles like the SC10 4x4, B5, and B5M. Designed for high-strength performance under stress, these ballstuds offer secure fitment and smooth suspension articulation. ✅ Set of 8 heavy-duty 6mm ballstuds✅ OEM fit for SC10 4x4, B5, B5M, and other compatible platforms✅ Heavy-duty steel construction – improved durability in high-load areas✅ Precision fit for smooth ball cup movement✅ Ideal for camber links, steering systems, and shock mounts 📦 Includes: (8) 6mm Heavy Duty Ballstuds Part #: 91047 💡 Pro Tip: Pair with fresh ball cups for smooth, slop-free suspension movement and tighter handling.

Read more less

Team Associated B6 Bumper Set (91685)Keep your RC10 B6 or B6D protected with this genuine Team Associated replacement bumper set. Whether you're replacing worn parts or upgrading your buggy's durability, this set has you covered with both front and rear bumpers included. Includes: (1) Front Bumper (1) Rear Bumper Compatibility: Team Associated RC10 B6 Team Associated RC10 B6D

Read more less

Team Associated Factory Team Carbon Front Gullwing Arms – RC10B74.2 Increased Response for High-Traction Tracks Upgrade your RC10B74.2 or B74.2D with these Factory Team Carbon Front Gullwing Suspension Arms, designed for racers who demand sharper handling on high-grip or smooth surfaces. The carbon material increases stiffness, delivering enhanced steering response and cornering precision. 🔩 Features: 🏁 Carbon construction for added rigidity 🎯 Designed for smoother surfaces and high-traction conditions 🔧 Direct replacement for stock gullwing arms 🧩 Includes suspension arm spacers for proper fit 📦 Includes: (1) Left Front Carbon Gullwing Arm (1) Right Front Carbon Gullwing Arm (2) Suspension Arm Spacers ✅ Compatibility: Team Associated RC10B74.2 Team Associated RC10B74.2D 🏆 Dial in your front-end for faster response and refined control where it matters most.

Read more less

Team Associated B6.1/B6.1D Gear Differential Outdrives [91785] 🔩 Smooth power transfer starts here! These Team Associated Gear Differential Outdrives are the perfect replacement for your B6.1 or B6.1D buggy. Precision-machined and durable, they’re ready to handle race-day abuse while keeping your diff performing like new. ✅ Direct fit for B6.1 and B6.1D gear differentials✅ Includes outdrives and pins for a complete refresh✅ Built tough for consistent, long-lasting performance Includes:(2) Gear Diff Outdrives(2) Outdrive Pins 📦 Part Number: 91785🏁 Brand: Team Associated

Read more less

🏁 Lightweight Strength for Elite PerformanceUpgrade your RC10B74.2 or B74.2D with this Carbon Front Shock Tower, built specifically for Gullwing arms. Crafted from high-quality carbon fiber, this tower offers the perfect blend of lightweight performance and rigid durability to keep your suspension responsive and race-ready. 🔧 Key Features: Designed for RC10B74.2 and B74.2D platforms Compatible with Gullwing front suspension arms Constructed from rigid, lightweight carbon fiber Improves handling precision and durability 📦 Includes: (1) Carbon Front Shock Tower (Gullwing Arm) 🔥 A must-have for racers who want consistent performance on demanding tracks!

Read more less

Team Associated 13mm Rear Shock Spring. These replacement springs are intended for the Team Associated B6.4, however, they will also work with the Team Associated B6.4D as a tuning option. Package includes two springs. Effects of Shock Spring Changes  Shock Spring  Characteristic  Softer Increased Chassis Roll Increased Traction Better in Bumpy Conditions More Likely to Bottom Out  Stiffer Decreased Chassis Roll Decreased Traction Increased Responsiveness COMPATIBILITY: Team Associated RC10B6.4Team Associated RC10B6.4D

Read more less

Reedy B6/B7 Flat Sensor Wire (175mm) – ASC96995Clean up your wiring and keep your electronics sharp with this Reedy Flat Sensor Wire, specially designed for a factory-perfect fit in Team Associated B6 and B7 series buggies. At 175mm, this length is ideal for tight, mid-motor setups where space matters. The flat profile tucks in nicely for a pro-level look and hassle-free routing. ✅ Designed for: RC10B6 / RC10B6.4 RC10B7 / RC10B7D Works with most brushless ESC/motor combos 📏 Length: 175mm🧰 Flat design for sleek wire management🔌 ROAR-compliant sensor connections OEM Part #: ASC96995  

Read more less

Upgrade your shocks with Team Associated's high-quality black aluminum 13mm shock caps. Designed for strength, consistency, and race-ready reliability, these caps provide enhanced durability over the stock plastic units while offering a sleek, factory look. ✅ Key Features Precision-machined aluminum construction for increased durability Anodized black for a factory team finish Lightweight design helps reduce unsprung mass Direct fit for Team Associated vehicles using 13mm shocks 🔧 Compatibility Fits the following Team Associated vehicles equipped with 13mm shocks: RC10B6.4 / RC10B6.4D RC10B6.3 / RC10B6.3D RC10B74.2 / RC10B74.2D RC10T6.4 RC10SC6.4(And any other models that use the 13mm V2 shock platform) 📦 Includes • • (2) Aluminum 13mm Shock Caps(Note: Shock bladders and O-rings sold separately)

Read more less

Factory Team Silicone Shock Fluid – 2oz (10wt–80wt)Dial in your suspension like a pro with Factory Team Silicone Shock Fluid! 🛠️ Made from 100% pure silicone, this oil maintains consistent performance in any temperature — no thinning in the heat, no thickening in the cold. Whether you're tuning for smooth landings or sharp handling, there's a perfect weight from 10wt to 80wt to match your setup. ✅ Great for: Oil-filled shocks on 1/10 & 1/8 scale vehicles Consistent performance across all temps Precision tuning from ultra-light to ultra-thick damping 🧪 Choose your weight using the dropdown menu.📦 2oz bottle – available in 10wt, 15wt, 20wt... up to 80wt Note: Team Associated shock oil runs slightly thinner than comparable Team Losi oils with the same labeled weight.  

Read more less

This is a Team Associated Rear Hub Link Mount set of two, intended for use with the Team Associated RC10 B74 Team 1/10 4WD Off-Road Electric Buggy to replace the kit supplied link mounts. COMPATIBILITY: Team Associated RC10 B74 OriginalTeam Associated RC10 B74.1Team Associated RC10 B74.1DTeam Associated RC10B6.2Team Associated RC10B6.2D  

Read more less

Maintain smooth, efficient power transfer with the Team Associated RC10B6.2 69mm CVA Bones. Built from high-quality materials, these precision-machined components are designed to withstand the rigors of competitive racing while ensuring consistent drivetrain performance. Features: 69mm length for proper fitment and geometry Precision-machined for smooth, efficient power delivery Durable construction for long-lasting performance Direct replacement for worn or damaged CVA bones Includes: (2) 69mm CVA Bones Compatibility: Team Associated RC10B6.2 Perfect for keeping your buggy’s drivetrain strong, smooth, and race-ready.

Read more less

Upgrade your hardware with these Team Associated M4 Low Profile Serrated Steel Wheel Nuts. Designed for a secure grip, the built-in serrations bite into the wheel surface to prevent loosening during high-impact runs or long race days. ✅ Features:• Low-profile design for improved clearance• Serrated face for extra locking power• Strong steel construction for durability• Standard M4 thread size 📦 Includes:• (10) M4 Serrated Steel Wheel Nuts🔧 Part Number: 91150💡 Ideal for 1/10 scale RC vehicles requiring M4 hardware.

Read more less

Direct-fit replacement for a range of B6-series buggies — essential for clean body and wing attachment. Upgrade or replace your worn mount with this OEM composite Wing/Body Mount for the RC10 B6 chassis line. The kit includes everything needed to properly secure both wing and body to your buggy. Includes: (1) Left Wing Brace (1) Right Wing Brace (1) Shim Plate (2) Wing Mount Buttons Key Features: Precision-molded composite for durability and reliable attachment Factory-style fit for consistent mounting and race-ready stiffness Optionally compatible with Team Associated Factory Team Aluminum Wing Mount (ASC91903) for racer upgrades Compatibility – What Fits Buggy Series Specific Models B6 Series RC10 B6, B6 Club Racer, B6D B6.1 Series B6.1, B6.1 Factory Lite, B6.1D, B6.1DL B6.2 Series B6.2, B6.2D B6.3 Series B6.3, B6.3D B6.4 Series B6.4, B6.4D Extended Chassis RC10 B64, B64 Club Racer, B64D T6 Variants RC10 T6.1, T6.2 SC6 Models SC6.1 Why It’s a Must-Have: Prevents body and wing movement during hard cornering or crashes Convenient replacement when original part wears or cracks Compatible across multiple mod cycles of the B6 platform — simplifies spare inventory!

Read more less

Team Associated RC10B7 Factory Team Carbon Rear Suspension Arms (2) – Lightweight Tuning for High-Bite Tracks! 💨 Take your RC10B7 handling to the next level with Factory Team Carbon Rear Suspension Arms. Built from AE’s proven lightweight carbon composite, these arms reduce unsprung weight and eliminate flex — giving you the precision and durability needed for high-grip conditions and competitive edge. 🔧 Key Features: ✅ Factory Team carbon composite material – ultra-light and super strong✅ Tuned stiffness for reduced flex and consistent rear traction✅ Ideal for high-bite tracks and competitive setups✅ Includes rear arm spacers for quick tuning adjustments✅ Race-proven performance, direct fit upgrade 📦 Includes: (2) Carbon Rear Suspension Arms (Arm Spacers) ✅ Compatibility: Team Associated RC10B7 Team Associated RC10B7D 🏁 Race harder, turn sharper, and accelerate faster with precision carbon upgrades.Factory Team quality you can feel. 🔧🔥

Read more less

  Dial in your drivetrain with Team Associated’s 48 Pitch Brushless Spur Gears. Designed for smooth power transfer and durability under brushless systems, these precision-molded gears give you the tuning options you need for different track conditions. Features: High-strength composite construction 48 pitch, optimized for brushless motors Available in multiple tooth counts for gearing flexibility Perfect balance of durability and efficiency Available Sizes (each sold separately): 69T (Part #9648) 72T (Part #9649) 75T (Part #9650) Compatibility: RC10B6 / B6D RC10B6.1 / B6.1D RC10B6.2 / B6.2D RC10B6.3 / B6.3D RC10B6.4 / B6.4D And other Team Associated 1/10 buggies using 48P gears

Read more less