The XRAY Aluminum Lower Suspension Holder is a precision-machined suspension tuning component designed for XRAY's Horizontal Split (HS) bulkhead system. Part 362323 installs in the front-rear (FR) position of the front suspension assembly. XRAY's factory manuals confirm the part number and FR location. About the Aluminum Lower Suspension Holder Precision Front Suspension Tuning Designed around XRAY's eccentric bushing system, this aluminum suspension holder allows racers to fine-tune important front-end geometry. XRAY specifically notes that different eccentric bushing combinations allow adjustment of front kick-up, roll center, and front track width, making this more than just a replacement part—it's also a valuable setup component. Features: Genuine XRAY suspension component Front-Rear (FR) lower suspension holder Designed for Horizontal Split (HS) bulkheads Aluminum construction Works with XRAY eccentric suspension bushings Allows adjustment of front kick-up Allows roll-center tuning Allows front track-width adjustment Precision fit for compatible XRAY 4WD platforms Excellent replacement or race-day setup option Includes: (1) XRAY Aluminum Lower Suspension Holder – Front-Rear Specifications: Part Number: 362323Material: AluminumPosition: Front Suspension – Rear Holder (FR)Bulkhead Type: Horizontal Split (HS)Type: Lower Suspension Holder Compatibility: ✅ XRAY XB4✅ XRAY XT4 The part is documented in the XB4 platform and is also specifically listed in the XT4 2024 front suspension assembly. 💡 Pro Tip: 362323 is the FR holder. If you're looking at the front suspension assembly, don't confuse it with 362313, which XRAY identifies as the matching Front-Front (FF) aluminum lower suspension holder.

Read more less

🏁 Large-Volume Design. Tough Composite. Genuine XRAY Performance. The XRAY Large Volume Composite Gear Differential Case is a genuine replacement differential housing designed for XRAY's large-volume gear differential system. XRAY manufactures the case from tough composite material and uses a rubber-sealed design to help maintain consistent differential operation. Designed for use in the front or rear differential, this is the standard composite version of the case, with 364912-G available separately as the optional graphite-composite version. ⚡ Features: 🏁 Genuine XRAY replacement part⚙️ Large-volume gear differential case💪 Tough composite construction🛡️ Rubber-sealed differential design🔧 Suitable for front or rear differential use🎯 Precision factory fitment🏎️ Designed for XRAY's large-volume differential system🛠️ Direct replacement for a worn or damaged differential case 📦 Includes: (1) XRAY Large Volume Composite Gear Differential Case 📏 Specifications: Part Number: 364912Material: CompositeType: Gear Differential CaseDifferential Type: Large VolumePosition: Front or Rear 🔧 Compatibility: Verified XRAY documentation shows 364912 used on multiple generations of the: ✅ XRAY XB4 XRAY's factory documentation confirms its use in the XB4 front and rear differential assemblies, including the XB4 2021, 2022, 2024, and 2025 platforms. 💡 Pro Tip: Don't confuse 364912 with 364912-G. The standard 364912 is the tough composite version, while 364912-G is XRAY's optional graphite-composite version.  

Read more less

🏁 Genuine XRAY Replacement. Precision Steering Hardware. The XRAY +5mm Servo Saver Pivot Shafts are genuine replacement steering components designed to support the servo saver and steering assembly on compatible XRAY 1/10 4WD off-road platforms. XRAY's official parts listing identifies 362552 specifically as “Servo Saver Pivot Shaft +5mm (2).” ⚡ Features: 🏁 Genuine XRAY replacement parts📏 +5mm pivot shaft configuration⚙️ Designed for the servo saver and steering assembly🎯 Maintains proper steering-system positioning and geometry🔧 Direct replacement for the factory pivot shafts🏎️ Designed for competition-level XRAY off-road platforms🛠️ Great replacement or race-day spare 📦 Includes: (2) XRAY Servo Saver Pivot Shafts +5mm 📏 Specifications: Part Number: 362552Type: Servo Saver Pivot ShaftConfiguration: +5mmQuantity: 2Position: Steering / Servo Saver Assembly 🔧 Compatibility: Verified XRAY documentation shows 362552 used across multiple generations of: ✅ XRAY XB4✅ XRAY XT4 For example, XRAY's XB4 2024, XB4 2025, XB4 2026, and XT4 2025 manuals all identify 362552 in the steering assembly. 💡 Pro Tip: These pivot shafts work directly with the servo saver assembly, so if you're rebuilding a steering system, inspect the servo saver, bearings, steering bushings, and steering plate for play at the same time.

Read more less

 🏁 Graphite Composite. Precision Steering. Genuine XRAY Performance. The XRAY Graphite Composite Steering Block is designed for use with XRAY's carbon steering block extension plate system. The graphite composite construction provides a stiff, lightweight steering component designed for precise front-end response and competition-level durability. XRAY's official parts listing identifies 362251-G specifically as “Composite Steering Block for Carbon Extension Plate – Graphite.” ⚡ Features: 🏁 Genuine XRAY replacement/tuning part💪 Graphite composite construction🎯 Designed for precise steering response🪶 Lightweight composite design🔧 Designed specifically for use with XRAY carbon extension plates⚙️ Compatible with XRAY's front CVD drivetrain configuration🏎️ Competition-oriented steering component🛠️ Great replacement or race-day spare 📦 Includes: (1) XRAY Graphite Composite Steering Block 📏 Specifications: Part Number: 362251-GMaterial: Graphite CompositeType: Steering BlockPosition: FrontQuantity: 1Application: Carbon Extension Plate Steering System 🔧 Compatibility: ✅ XRAY XB4 platforms using the applicable carbon extension plate steering system The XB4 2026 factory manual specifically lists 362251-G as the included graphite steering block, alongside 362251-M Medium and 362261 Aluminum as setup options. 💡 Pro Tip: Don't confuse 362251-G with 362250-G. XRAY lists them as two different parts: 362251-G is specifically designed for the carbon extension plate, while 362250-G is the standard graphite composite steering block.

Read more less

🏁 High-Grip Stability. Linear Response. Factory-Matched Performance. The XRAY 42mm 5-Dot Front Spring Set is designed specifically for XRAY big-bore shocks, providing a constant linear spring rate throughout compression for predictable and consistent suspension performance. XRAY identifies the 5-dot rating directly on the springs for quick setup identification. Each XRAY spring is individually measured, selected, and matched into pairs to ensure equal length and consistent performance between the left and right sides of your race car. ⚡ Features: 🏁 Genuine XRAY optional tuning springs⚙️ 5-Dot front spring rate📏 42mm length🎯 Linear spring design provides a constant rate throughout compression🔧 Specifically designed for XRAY big-bore shocks⚖️ Individually measured and matched into pairs🚀 Provides additional suspension setup options🔥 XRAY notes the 5-dot spring can improve front stability and overall handling on very high-grip tracks 📦 Includes: (2) XRAY 42mm 5-Dot Front Springs 📏 Specifications: Part Number: 368195Position: FrontLength: 42mmSpring Type: LinearIdentification: 5 DotsQuantity: 2 🔧 Compatibility: Used across multiple XRAY 1/10 off-road platforms, including various: ✅ XRAY XB2✅ XRAY XB4✅ XRAY XT2 Fitment spans numerous generations, so racers should confirm the 42mm front spring configuration used on their specific model before ordering. 💡 Pro Tip: The 5-Dot is a setup spring, not simply a replacement spring. XRAY specifically notes that this spring can provide better front stability and overall handling in very high-grip conditions, making it a useful tuning option for carpet and other high-traction surfaces.

Read more less

 🏁 Lightweight. Precise. Genuine XRAY Replacement. The XRAY Composite Servo Saver is a genuine factory replacement component designed for XRAY's steering system. The molded composite pieces form the servo saver assembly, helping protect the steering servo from impacts while maintaining smooth and responsive steering operation. XRAY's official parts listings identify 362510 specifically as the Composite Servo Saver. ⚡ Features: 🏁 Genuine XRAY replacement part⚙️ Molded composite construction🛡️ Servo saver design helps protect steering components from impacts🎯 Maintains smooth steering operation🪶 Lightweight factory-style construction🔧 Direct replacement for the original servo saver components🛠️ Great replacement or race-day spare 📦 Includes: (1) XRAY Composite Servo Saver Set 📏 Specifications: Part Number: 362510Material: CompositeType: Servo SaverPosition: Steering Assembly 🔧 Compatibility: XRAY's documentation confirms 362510 is used on multiple XRAY 1/10 off-road platforms, including the XB4 and XT4 families. It remains listed in the XT4 parts documentation as the standard composite servo saver. 💡 Pro Tip: XRAY also offers 362510-G, the optional graphite composite version. The graphite version uses a specially formulated material intended to increase strength, improve friction characteristics, and reduce weight.

Read more less

🔧🏁 Medium-Compound Rear Suspension Arm for XRAY XB2 & XB4 The XRAY Left Rear Lower Suspension Arm is a genuine replacement suspension component designed for compatible XRAY XB2 and XB4 1/10 competition buggies. Molded from XRAY's Medium composite compound, this arm provides the standard balance of durability, flex, and suspension response for both carpet and dirt racing applications. Precision molded for direct factory fitment, it's an ideal replacement for a worn or damaged suspension arm or a useful spare to keep ready in your pit box. 🏁 About the Medium Suspension Arm ⚙️ Medium Composite Compound XRAY offers these suspension arms in multiple compounds, including Medium, Hard, and Graphite. This Medium version provides the standard compound option for a balanced combination of flex and durability. 🔧 Factory Fitment Designed for compatible XB2 and XB4 platforms, the arm installs directly while maintaining XRAY's intended rear suspension geometry and mounting locations. 🔧 Features Genuine XRAY replacement suspension component Left rear lower suspension arm Medium composite compound Balanced flex and durability Precision molded construction Direct factory fitment Maintains proper suspension geometry Suitable for carpet and dirt racing Compatible with select XB2 and XB4 platforms Great replacement or race-day spare 📦 Includes (1) XRAY Left Rear Lower Suspension Arm – Medium 📊 Product Details Specification Details Brand XRAY Part Number 363122-M Product Type Rear Lower Suspension Arm Position Left Rear Compound Medium Application XRAY XB2 / XB4 🚙 Compatibility XRAY XB2 2021 Carpet XRAY XB2 2021 Dirt XRAY XB2 2023 Carpet XRAY XB2 2023 Dirt XRAY XB2 2024 Carpet XRAY XB2 2024 Dirt XRAY XB4 2020 XRAY XB4 2021 Carpet XRAY XB4 2021 Dirt XRAY XB4 2023 Carpet XRAY XB4 2023 Dirt XRAY XB4 2024 Carpet XRAY XB4 2024 Dirt

Read more less

🔧🏁 Hard-Compound Long Rear Suspension Arm for XRAY XB2 & XB4 The XRAY Composite Long Rear Lower Left Suspension Arm is a genuine replacement and tuning component designed for compatible XRAY XB2 and XB4 competition buggies. Constructed from XRAY's durable Hard composite material, this long rear arm provides a strong, responsive suspension setup while maintaining the precision required for competitive racing. The arm allows variable rear shock positioning and accommodates XRAY multi-adjustable uprights, giving racers additional flexibility when tuning rear suspension geometry for different track conditions. 🏁 About the Hard Long Rear Arm ⚙️ Hard Composite Construction XRAY offers these suspension arms in Medium, Hard, and Graphite compounds for different track and setup demands. This Hard version provides increased rigidity compared with the standard Medium compound while retaining some additional flex compared with the Graphite option. 🔧 Adjustable Shock Positioning Multiple shock positioning options allow racers to fine-tune rear suspension characteristics, while compatibility with XRAY's multi-adjustable uprights provides additional setup flexibility. 💪 Race-Ready Durability XRAY's high-tech composite material is designed to withstand demanding racing conditions while maintaining accurate suspension geometry and reliable performance. 🔧 Features Genuine XRAY replacement and tuning component Long rear lower left suspension arm Hard composite construction Durable and responsive suspension tuning option Variable rear shock positioning Accommodates multi-adjustable uprights Precision molded for accurate fitment Suitable for Carpet and Dirt racing Compatible with select XB2 and XB4 platforms Ideal for replacement or suspension setup tuning 📦 Includes (1) XRAY Composite Long Rear Lower Left Suspension Arm – Hard 📊 Product Details Specification Details Brand XRAY Part Number 363123-H Product Type Rear Lower Suspension Arm Position Left Rear Configuration Long Compound Hard Application XRAY XB2 / XB4 🚙 Compatibility XRAY XB2 2021 Carpet XRAY XB2 2021 Dirt XRAY XB2 2023 Carpet XRAY XB2 2023 Dirt XRAY XB2 2024 Carpet XRAY XB2 2024 Dirt XRAY XB4 2020 XRAY XB4 2021 Carpet XRAY XB4 2021 Dirt XRAY XB4 2023 Carpet XRAY XB4 2023 Dirt XRAY XB4 2024 Carpet XRAY XB4 2024 Dirt

Read more less

🔧🏁 Rigid Graphite Long Rear Suspension Arm for XRAY XB2 & XB4 The XRAY Composite Long Rear Lower Right Suspension Arm is a genuine replacement and tuning component designed for compatible XRAY XB2 and XB4 competition buggies. Constructed from XRAY's rigid Graphite composite material, this long rear arm combines durability with a stiff, responsive feel for precise suspension performance. The arm supports variable rear shock positioning and works with XRAY's multi-adjustable uprights, giving racers additional flexibility when dialing in their suspension setup for different track conditions. 🏁 About the Graphite Long Rear Arm ⚙️ Rigid Graphite Compound XRAY offers these suspension arms in Medium, Hard, and Graphite compounds to accommodate different setups and track conditions. The Graphite version provides the most rigid option, delivering a responsive suspension feel for racers looking for increased stiffness. 🔧 Adjustable Suspension Setup The arm is designed to allow variable rear shock positioning and accommodate XRAY multi-adjustable uprights, providing additional tuning possibilities within the rear suspension. 💪 Durable Composite Construction XRAY's high-tech composite construction is engineered to withstand the demands of competitive racing while maintaining precise suspension geometry and consistent performance. 🔧 Features Genuine XRAY replacement and tuning component Long rear lower right suspension arm Rigid Graphite composite construction Stiff, responsive suspension tuning option Variable rear shock positioning Compatible with multi-adjustable uprights Durable high-tech composite material Precision molded for accurate fitment Suitable for Carpet and Dirt applications Designed for compatible XB2 and XB4 platforms 📦 Includes (1) XRAY Composite Long Rear Lower Right Suspension Arm – Graphite 📊 Product Details Specification Details Brand XRAY Part Number 363113-G Product Type Rear Lower Suspension Arm Position Right Rear Configuration Long Compound Graphite Application XRAY XB2 / XB4 🚙 Compatibility XRAY XB2 2021 Carpet XRAY XB2 2021 Dirt XRAY XB2 2023 Carpet XRAY XB2 2023 Dirt XRAY XB2 2024 Carpet XRAY XB2 2024 Dirt XRAY XB4 2020 XRAY XB4 2021 Carpet XRAY XB4 2021 Dirt XRAY XB4 2023 Carpet XRAY XB4 2023 Dirt XRAY XB4 2024 Carpet XRAY XB4 2024 Dirt    

Read more less

🔧🏁 Graphite Suspension Arm Upgrade for XB4 The XRAY Graphite Rear Lower Suspension Arm is an optional upgrade designed for compatible XRAY XB4 1/10 4WD competition buggies. This right-side rear arm features XRAY's graphite composite construction for a more rigid suspension setup and precise response on the track. Originally designed for the XB4 2016, this arm is also compatible with the 2017 and 2018 XB4 platforms. 🏁 About the Graphite Rear Arm ⚙️ Graphite Composite Construction The graphite material provides increased rigidity compared with softer suspension arm compounds, giving racers an additional tuning option for their XB4 setup. 🔧 Direct-Fit XRAY Upgrade Designed specifically for the XB4 suspension system, the arm provides factory fitment and maintains the intended suspension geometry. 🔧 Features Genuine XRAY optional suspension arm Right rear lower suspension arm Graphite composite construction Rigid suspension tuning option Precision molded for proper fitment Maintains factory suspension geometry Direct-fit upgrade for compatible XB4 models Ideal for racing, replacement, or setup tuning 📦 Includes (1) XRAY Graphite Right Rear Lower Suspension Arm 📊 Product Details Specification Details Brand XRAY Part Number 363111-G Product Type Rear Lower Suspension Arm Position Right Rear Material/Compound Graphite Application XRAY XB4 1/10 4WD Buggy 🚙 Compatibility XRAY XB4 2016 XRAY XB4 2017 XRAY XB4 2018  

Read more less

🔧🏁 Choose Your Suspension Arm Compound The XRAY Right Rear Lower Suspension Arm is a genuine replacement and tuning component for a wide range of XRAY XB2 and XB4 1/10 competition buggy platforms. Available in your choice of Hard or Medium compound, this arm allows racers to replace a worn component or select the material option that best suits their setup. Precision molded for proper fit and suspension geometry, it's an essential replacement part to keep on hand at the track. 🔧 Choose Your Compound Medium – Standard medium-compound suspension arm Hard – More rigid hard-compound suspension arm 🏁 Features Genuine XRAY replacement/tuning suspension arm Right rear lower suspension arm Choose Hard or Medium compound Precision molded construction Direct fit for compatible XRAY platforms Maintains proper factory suspension geometry Compatible with a wide range of XB2 and XB4 generations Great replacement or race-day spare 📦 Includes (1) XRAY Right Rear Lower Suspension Arm in selected compound 🚙 Compatibility XRAY XB2 Original XRAY XB2 Dirt XRAY XB2 2017 Carpet XRAY XB2 2017 Dirt XRAY XB2 2018 Carpet XRAY XB2 2019 Dirt XRAY XB2 2020 Carpet XRAY XB2 2020 Dirt XRAY XB2 2021 Carpet XRAY XB2 2021 Dirt XRAY XB2 2023 Carpet XRAY XB2 2023 Dirt XRAY XB2 2024 Carpet XRAY XB2 2024 Dirt XRAY XB4 2019 XRAY XB4 2020 XRAY XB4 2021 Carpet XRAY XB4 2021 Dirt XRAY XB4 2023 Carpet XRAY XB4 2023 Dirt XRAY XB4 2024 Carpet XRAY XB4 2024 Dirt Available Options: Medium or Hard  

Read more less

🔧🏁 Replacement Big Bore Shock Components for the XB4 2025 The XRAY Composite Big Bore Shock Caps, Spring Retainers & Ball Joints Set is a genuine replacement shock parts package designed for the XRAY XB4 2025 Carpet and Dirt platforms. This convenient set includes shock caps, spring retainers, and ball joints for servicing or rebuilding your XB4's big bore shocks. It's also a handy set to keep in the pit box for race-day repairs. 🔧 About the Big Bore Shock Parts Set ⚙️ Genuine XRAY Replacement Components Designed specifically for XRAY big bore shock assemblies, these composite components provide factory fitment for compatible XB4 2025 models. 🏁 Ideal for Shock Maintenance Whether you're rebuilding your shocks during regular maintenance or replacing worn or damaged components, this set provides the primary external components together in one package. 🔧 Features Genuine XRAY replacement shock parts Designed for XB4 2025 big bore shocks Composite construction Includes shock caps Includes spring retainers Includes ball joints Factory replacement fit Ideal for shock rebuilds and maintenance Great spare parts set for the race-day pit box 📦 Includes (2) Composite Big Bore Shock Caps (2) Spring Retainers (2) Ball Joints 📊 Product Details Specification Details Brand XRAY Part Number 368014 Product Type Big Bore Shock Parts Set Material Composite Quantity 2 Sets Application Shock Maintenance / Replacement 🚙 Compatibility XRAY XB4 2025 Carpet XRAY XB4 2025 Dirt  

Read more less

🔧🏁 Lightweight Titanium Upgrade for XRAY Shock Mounting The XRAY Titanium Shock Standoff Set is a precision-machined upgrade designed for a wide range of XRAY racing platforms. Constructed from high-grade titanium, these standoffs provide an excellent combination of strength, low weight, and durability for secure, reliable shock mounting. Ideal for racers looking to upgrade factory components with lightweight premium hardware, each standoff is CNC machined for precise fitment and dependable performance. 🏁 About the Titanium Shock Standoffs ⚙️ High-Grade Titanium Construction Titanium provides excellent strength while keeping weight to a minimum, making these standoffs well suited for competitive racing applications where both durability and weight matter. 🎯 Precision CNC Machined Each standoff is CNC machined for accurate fitment, helping provide a secure mounting point for the shocks and consistent suspension assembly. 💪 Durable & Corrosion Resistant In addition to being lightweight and strong, titanium offers excellent corrosion resistance for long-lasting performance through regular racing and maintenance. 🔧 Features Genuine XRAY optional upgrade High-grade titanium construction CNC machined for precision Lightweight design Strong and durable shock mounting Corrosion resistant Precision fit for compatible XRAY platforms Premium upgrade for competitive racing Package includes two standoffs 📦 Includes (2) XRAY Titanium Shock Standoffs 📊 Product Details Specification Details Brand XRAY Part Number 368045-T Product Type Shock Standoff Material Titanium Construction CNC Machined Quantity 2 🚙 Compatibility XRAY XB2 2023 Carpet XRAY XB2 2023 Dirt XRAY XB2 2024 Carpet XRAY XB2 2024 Dirt XRAY XB2 2025 Carpet XRAY XB2 2025 Dirt XRAY XB4 2023 Carpet XRAY XB4 2023 Dirt XRAY XB4 2024 Carpet XRAY XB4 2024 Dirt XRAY XB4 2025 Carpet XRAY XB4 2025 Dirt XRAY XT2 2023 Carpet XRAY XT2 2023 Dirt XRAY XT2 2024 Carpet XRAY XT2 2024 Dirt XRAY XT4    

Read more less

🔋🏁 Ultra-Low CG Power Built for Competitive Racing The R1WURKS 4600mAh 120C 7.6V 2S ULCG Shorty LiPo Battery is a race-focused pack designed to deliver an excellent combination of punch, runtime, low weight, and an ultra-low center of gravity. Using R1WURKS Silicon Graphene cell technology, this shorty pack offers reduced internal resistance, cooler operating temperatures, and strong voltage throughout the run. At just 18.4mm tall and 157g, the ultra-low-profile design helps racers lower chassis weight and center of gravity while maintaining the power needed for both stock and modified racing. 🏁 About the R1WURKS ULCG Shorty ⚡ Silicon Graphene Cell Technology R1WURKS Silicon Graphene cells are designed to provide lower internal resistance and improved efficiency, helping the battery operate cooler while delivering excellent voltage, punch, and runtime. The technology also provides increased cycle life and improved voltage characteristics for demanding race applications. 📉 Ultra-Low Center of Gravity With a height of only 18.4mm, the ULCG design places battery mass lower in the chassis. This can help reduce the vehicle's overall center of gravity and gives racers additional flexibility when tuning chassis weight and balance. 🚀 120C Performance The 4600mAh pack carries a 120C peak rating, providing the strong power delivery and acceleration required for competitive stock and modified classes. 🔌 5mm Bullet Connections The battery uses 5mm bullet connectors for the main power connection along with a 2mm balance plug. 🔧 Features 4600mAh capacity 7.6V 2S LiPo configuration Silicon Graphene cell technology Ultra-low center of gravity design 120C peak discharge rating Excellent punch and sustained voltage Strong runtime for competitive racing Reduced internal resistance Lower operating temperatures Increased cycle life Lightweight 157g design Only 18.4mm tall 5mm bullet connectors 2mm balance connection Suitable for stock and modified racing Supports charge rates up to 3C 1C charging recommended for maximum battery life ROAR Approved 📦 Includes (1) R1WURKS 4600mAh 120C 7.6V 2S ULCG Shorty Silicon Graphene LiPo Battery 📊 Specifications Specification Details Brand R1WURKS SKU 030040 Battery Type Silicon Graphene LiPo Configuration 2S Nominal Voltage 7.6V Capacity 4600mAh Peak Discharge 120C Watt Hours 35Wh Max Charge Rate 3C Recommended Charge Rate 1C Main Connector 5mm Bullet Balance Connector 2mm Length 92.8mm Width 47mm Height 18.4mm Weight 157g ROAR Approved Yes  

Read more less

⚡🏁 High-Output 12V Power for Your RC Pit Setup The R1WURKS 12V Power Supply delivers a powerful, dependable source of DC power for your RC charging station and pit area. With an output of 12 volts, 750 watts, and 75 amps, it's built to provide plenty of power for demanding charging setups. Finished with a carbon-print vinyl wrap, the R1WURKS power supply combines serious output with a clean, race-ready appearance. ⚡ About the R1WURKS Power Supply 🔋 750W / 75A Output With up to 750 watts and 75 amps of 12V DC output, this power supply provides the capacity needed to run compatible RC battery chargers and other 12V pit equipment. 🔌 Multiple Configurations Available R1WURKS offers several power supply configurations to suit different charging setups, including standard and low-profile options with multiple output slots. 🏁 Pit-Ready Finish A carbon-print vinyl wrap gives the power supply a finished appearance that looks right at home on a race bench or charging station. 🔧 Features 12V DC power supply Up to 750W output Up to 75A output Designed for RC charging and pit applications Carbon-print vinyl wrapped exterior Multiple configurations available Compact solution for powering compatible DC chargers 🔌 Available Configurations 2-Slot 2-Slot Low Profile – 67A w/USB 3-Slot w/USB 📊 Specifications Specification Details Brand R1WURKS Item Number 080001 Product Type DC Power Supply Output Voltage 12V Maximum Output 750W Maximum Current 75A Finish Carbon-Print Vinyl Wrap Application RC Chargers / Pit Equipment Note: Output specifications may vary by configuration. The 2-slot low-profile version is rated at 67A, while the supplied general specifications list the standard power supply at 75A.

Read more less

🧹✨ Get Into the Tight Spots & Keep Your RC Clean The BOOF RC Detailing Brush is a simple, effective tool for cleaning dirt, dust, and debris from your RC cars, trucks, boats, and equipment. Available in five different sizes from 21cm to 25cm, you can choose the size that works best for your cleaning needs. Long, soft bristles make it easy to reach into wheels, suspension components, chassis areas, vents, and other narrow spaces where dirt loves to collect. 🧼 About the Detailing Brush 🔍 Five Sizes to Choose From Available in five different sizes, allowing you to select the brush that best fits your application. Smaller brushes are great for tight spaces and detailed components, while larger sizes make quick work of bigger areas. 🪶 Long, Scratch-Safe Bristles The brush features approximately 2-inch-long bristles and contains no exposed metal parts, helping reduce the risk of scratching or marring delicate surfaces while cleaning. 💦 Wet or Dry Cleaning Use the brush dry to sweep away loose dust and debris or wet for more thorough cleaning. It's a handy addition to your RC pit bag, workbench, or cleaning station. 🔧 Features Choose from 5 different sizes Available in lengths from 21cm to 25cm Long bristles reach into narrow and tight spaces No exposed metal parts Helps reduce the risk of scratching delicate surfaces Suitable for wet or dry use Great for wheels, tires, chassis, suspension, vents, and more Useful for RC cars, trucks, boats, motorcycles, bicycles, and automotive detailing Great addition to your pit bag or workbench 📦 Includes (1) BOOF RC Detailing Brush in Selected Size 📊 Specifications Specification Details Brand BOOF RC Product Type Detailing Brush Available Sizes 21cm, 22cm, 23cm, 24cm or 25cm Bristle Length Approx. 2in Use Wet or Dry Quantity 1 Brush – Choose Size Application RC Cleaning & General Detailing  

Read more less

🔧⚙️ Precision Suspension Tuning Starts Here The ProTek RC Aluminum Ball Stud Washer Set is a must-have upgrade for racers looking to fine-tune their suspension geometry. Made from durable black anodized aluminum, these precision-machined washers won't compress or deform like plastic spacers, providing consistent ball stud height for accurate suspension setup. With three different thicknesses included, you'll have the flexibility to make precise roll center, steering, and wheelbase adjustments. 🔧 About the Aluminum Ball Stud Washer Set ⚙️ Precision Suspension Adjustments These washers allow you to accurately adjust ball stud height, making it easier to fine-tune suspension geometry for improved handling and performance. Common uses include: Roll center adjustments Steering geometry tuning Wheelbase adjustments Link height spacing 💪 Durable Aluminum Construction Unlike plastic spacers, these black anodized aluminum washers resist flattening and deformation, helping maintain consistent suspension settings even under heavy loads. 🏁 Multiple Thicknesses Included Three washer thicknesses provide a variety of tuning options, allowing quick setup changes for different track conditions. 🔧 Features ✔ Precision-machined aluminum construction✔ Black anodized finish✔ Won't flatten or deform like plastic spacers✔ Fits both 4-40 and M3 ball studs✔ Ideal for suspension geometry adjustments✔ Three washer thicknesses included✔ Great for racers and performance tuning 📦 Includes (4) 3 x 5.5 x 0.5mm Aluminum Washers (4) 3 x 5.5 x 1.0mm Aluminum Washers (4) 3 x 5.5 x 2.0mm Aluminum Washers Total: 12 Washers 📊 Specifications Specification Details Material Aluminum Finish Black Anodized Inside Diameter 3mm Outside Diameter 5.5mm Thicknesses Included 0.5mm, 1.0mm, 2.0mm Quantity 12 Washers 🚗 Compatibility Compatible with: RC vehicles using 4-40 ball studs RC vehicles using M3 ball studs Ideal for most on-road and off-road vehicles that utilize adjustable ball stud suspension geometry. ⚠️ Notes Precision tuning washers designed for suspension geometry adjustments. Compatible with both 4-40 and M3 ball studs. Black anodized finish provides excellent durability and corrosion resistance. • • Also available in Blue Anodized (ProTek RC PTK-8371).

Read more less

🏁🔥 Precision Steering & Maximum Front-End Grip for Carpet Racing! The Pro-Motion Viper 2.2" 2WD Front LP Carpet Tires are engineered specifically for competitive carpet and turf racing. Featuring a low-profile carcass, tapered mini pin tread pattern, and race-ready pre-mounted convenience, these front tires deliver smooth steering response, exceptional consistency, and predictable handling for modern 1/10 2WD buggy setups. Available pre-mounted on yellow or white wheels with a 12mm hex. 🏁 About the Viper Front LP Tires 🛞 Low-Profile Carpet Racing Design The LP carcass minimizes sidewall flex for: Improved steering precision More stable cornering Consistent front-end feel ⚙️ Advanced Front Tire Tread Pattern Features tapered mini pins, dual outside wedges, and a directional tread layout to provide balanced grip without an overly aggressive steering feel. 🔥 Race-Ready Pre-Mounted Setup Factory pre-mounted tires save prep time and get your buggy ready for the track immediately. 🔧 Key Features ✔ Low-profile carcass for improved stability✔ Reduces sidewall deflection for consistent handling✔ Tapered mini pin tread design✔ Directional tread pattern for tuning flexibility✔ Dual mini outside wedges enhance steering response✔ Factory pre-mounted for convenience✔ Designed for carpet and turf racing✔ C5 Super Soft compound for maximum traction 🎨 Wheel Color Options Yellow Wheels (3070-C5-Y) White Wheels (3070-C5-W) 📦 Includes (2) Pro-Motion Viper 2.2" 2WD Front LP Pre-Mounted Buggy Tires 📊 Specifications Scale: 1/10 Application: 2WD Buggy Position: Front Wheel Hex: 12mm Inner Tire / Outer Wheel Diameter: 2.2in (55.88mm) 💡 Perfect For ✔ Competitive carpet racing✔ Turf racing setups✔ Indoor 2WD buggy racing✔ Racers seeking smooth front steering response ⚠️ Notes Front tires only Pre-mounted tire/wheel assemblies Designed for carpet and turf surfaces

Read more less

🏁🔥 Versatile Grip & Stability for Modern Carpet Racing! The Pro-Motion Viper LP Rear Carpet Tire is designed specifically for today’s high-traction carpet and turf racing conditions. Featuring a low-profile carcass, tapered mini pin tread design, and directional layout, the Viper delivers the perfect balance of grip, stability, and controlled slip for competitive 1/10 buggy racing. Available pre-mounted on your choice of yellow or white wheels. 🏁 About the Viper LP Carpet Tire 🛞 Low-Profile Carpet Racing Design The LP carcass reduces sidewall flex and deflection to improve: Corner stability Steering consistency Predictable handling ⚙️ Advanced Tread Pattern Features tapered mini pins, dual outside wedges, and a directional radius design to maximize performance across carpet and turf tracks. 🔥 Race-Ready Pre-Mounted Convenience Factory pre-mounted tires help save prep time and get you race-ready faster. 🔧 Key Features ✔ Carpet-specific LP tire design✔ Factory pre-mounted convenience✔ Tapered mini pin tread pattern✔ Directional tread for tuning versatility✔ Excellent balance of grip and controlled slip✔ Designed for carpet and turf racing✔ Includes black open cell inserts✔ Available on yellow or white wheels 🎨 Wheel Color Options Yellow Wheels (3090-C5-Y) White Wheels (3090-C5-W) 📦 Includes (2) Pro-Motion Viper LP Rear Carpet Tires (2) Black Open Cell Foam Inserts 🚗 Application 1/10 Scale Buggy Racing Carpet Tracks Turf Tracks 💡 Perfect For ✔ Competitive carpet racing✔ Turf racing setups✔ Indoor buggy racing✔ Racers wanting fast race-day tire prep  

Read more less

🏁🔥 Maximum Grip for High-Traction Carpet Racing! The Pro-Motion Viper 2.2" Rear LP Carpet Tire is designed specifically for modern high-grip carpet and turf racing conditions. Featuring a low-profile carcass and aggressive directional tread design, the Viper delivers exceptional stability, predictable handling, and consistent traction for competitive 1/10 buggy racing. The C5 Super Soft compound is ideal for maximizing grip on demanding high-traction surfaces. 🏁 About the Viper LP Carpet Tire 🛞 Low-Profile Racing Design The low-profile carcass reduces sidewall flex and deflection for: Improved corner stability Faster steering response More consistent handling ⚙️ Advanced Carpet Tread Pattern Features tapered mini pins, directional tread layout, and dual outside wedges to provide balanced traction and tuning flexibility across carpet and turf tracks. 🔥 C5 Super Soft Compound Built for maximum grip and confidence on high-traction racing surfaces. 🔧 Key Features ✔ Low-profile carcass optimized for carpet racing✔ Tapered mini pin tread pattern✔ Directional tread design for tuning versatility✔ Excellent stability and corner consistency✔ Designed for carpet and turf racing✔ Includes black closed cell inserts✔ C5 Super Soft compound for maximum traction 📦 Includes (2) Pro-Motion Viper 2.2" Rear LP Buggy Tires (2) Black Closed Cell Foams 🚗 Application 1/10 Scale 2WD & 4WD Buggy Racing Carpet Tracks Turf Tracks 💡 Perfect For ✔ Competitive carpet racing✔ High-traction indoor tracks✔ Turf racing setups✔ Racers seeking maximum rear grip ⚠️ Notes Wheels not included Tire gluing required Designed for carpet and turf surfaces

Read more less

🏁 Aggressive Styling. Maximum Rear Grip. Championship Proven. The JConcepts Punisher 2 (P2) body is built for racers who want bold looks and serious performance. With added rear stability and aerodynamic tuning, the P2 is a top choice for high-grip and carpet racing conditions. 🏁 About the P2 Body 💨 Rear Grip & Stability The taller cab, rear winglets, and fin stabilizer increase rear-end stability, helping your buggy stay planted through high-speed sections and sweeping corners. 🎯 Precision Tracking A tall rear fin acts like a vane, improving straight-line tracking and maintaining control during aggressive driving. 🏆 Race-Proven Performance The P2 body has delivered wins at the highest level, including IFMAR World Championship success and multiple ROAR National Championships. 🔧 Key Features ✔ JConcepts Punisher 2 (P2) design✔ Raised nose and taller cab profile✔ Rear winglets for added stability✔ Tall rear fin stabilizer for tracking✔ Chamfered side-pods for clean airflow✔ Includes carpet-specific rear wing✔ Clear polycarbonate construction 📦 Includes (1) Clear P2 Buggy Body (1) Clear Carpet Wing 🚗 Compatibility Team Losi Racing 22X-4 ⚠️ Note: Body comes clear and unpainted Painted examples shown are for reference only 🏁 More rear grip. Better tracking. Built to dominate high-grip tracks.  

Read more less

Caster Blocks Overview:This is a replacement set of aluminum caster blocks designed for the Team Losi Racing 22X-4 2.0 platform. These components help maintain proper front suspension geometry and durability. 🔧 Key Features ✔ Aluminum construction for added strength✔ Maintains front suspension geometry✔ Durable and rigid design✔ Direct fit replacement 📦 Includes (1) Left Aluminum Caster Block (1) Right Aluminum Caster Block 🚗 Compatibility Team Losi Racing 22X-4 2.0 AC Team Losi Racing 22X-4 2.0 DC Ideal for replacing worn or damaged components, these caster blocks help keep your front suspension performing consistently and reliably.    

Read more less

Slipper Plate Overview:This is a replacement decoupled slipper plate set designed for the Team Losi Racing 22X-4 2.0 platform. It is intended for use with the decoupled slipper system to maintain smooth and consistent drivetrain performance. 🔧 Key Features ✔ Replacement slipper plate and pad set✔ Designed for decoupled slipper setup✔ Helps maintain smooth power transfer✔ Direct fit design 📦 Includes (1) Small Decoupled Slipper Plate (1) Small Decoupled Slipper Pad (1) Pin 🚗 Compatibility Team Losi Racing 22X-4 2.0 AC Team Losi Racing 22X-4 2.0 DC Requires TLR-1298 Decoupled Slipper Assembly (sold separately) Ideal for maintenance or rebuilds, this set helps keep your slipper system operating smoothly and consistently.    

Read more less

Shock Tower Guards Overview:This is a replacement rear shock tower guards set designed for the Team Losi Racing 22X-4 2.0 platform. It helps protect the rear shock tower from wear and impacts during use. 🔧 Key Features ✔ Replacement rear shock tower guards✔ Helps protect shock tower from damage✔ Maintains durability and longevity✔ Direct fit design 📦 Includes (1) Rear Shock Tower Guards Set 🚗 Compatibility Team Losi Racing 22X-4 2.0 AC Team Losi Racing 22X-4 2.0 DC Ideal for replacing worn components, this set helps keep your rear shock tower protected and performing as intended.  

Read more less

Pivot Block Overview:The Team Losi Racing 22X-4 2.0 Aluminum “AC-C” Pivot Block is a replacement and upgrade part designed to improve durability and tuning flexibility. Built from lightweight aluminum, it offers a more rigid and refined rear suspension setup. 🏁 About the Aluminum Pivot Block 🎯 Tunable Rear Geometry This pivot block is designed to work with square pills, allowing a wide range of toe and anti-squat adjustments to fine-tune handling for different track conditions. 💪 Durable & Lightweight Machined from aluminum and anodized for protection, it provides increased strength while maintaining a clean, lightweight design. ⚙️ Smart Clearance Design Engineered to allow reduced rear toe settings without interfering with the gearbox, helping improve rotation and efficiency—especially on high-grip tracks. 🔧 Key Features ✔ Lightweight aluminum construction✔ Anodized finish for durability and corrosion resistance✔ Supports square pills for tuning adjustments✔ Allows toe and anti-squat customization✔ Designed for improved clearance and efficiency✔ Direct fit replacement / upgrade 📦 Includes (1) Aluminum “AC-C” Pivot Block 🚗 Compatibility Team Losi Racing 22X-4 2.0 AC Team Losi Racing 22X-4 2.0 DC A great upgrade for racers looking to increase durability while unlocking more precise rear-end tuning options.            

Read more less

Turnbuckle Set Overview:This is a replacement HD steel turnbuckle and rod end set designed for the Team Losi Racing 22X-4 2.0 platform. It provides the components needed to maintain proper suspension and steering adjustments. 🔧 Key Features ✔ HD steel turnbuckles for durability✔ Includes rod ends for complete setup✔ Maintains precise adjustment and alignment✔ Direct fit replacement 📦 Includes (7) HD Steel Turnbuckles (14) Rod Ends 🚗 Compatibility Team Losi Racing 22X-4 2.0 AC Team Losi Racing 22X-4 2.0 DC Ideal for maintenance or rebuilds, this set helps keep your suspension and steering adjustments accurate and consistent.          

Read more less

Sway Bar Mount Overview:This is a replacement sway bar mount set designed for the Team Losi Racing 22X-4 2.0 platform. It secures the sway bar system in place and helps maintain proper suspension function. 🔧 Key Features ✔ Replacement sway bar mount set✔ Maintains proper sway bar positioning✔ Supports consistent suspension performance✔ Direct fit design 📦 Includes (1) Sway Bar Mount Set 🚗 Compatibility Team Losi Racing 22X-4 2.0 AC Team Losi Racing 22X-4 2.0 DC Ideal for replacing worn or damaged components, this set helps keep your sway bar system secure and performing as intended.        

Read more less

Sway Bar Bushing Overview:This is a replacement sway bar bushing set designed for the Team Losi Racing 22X-4 2.0 platform. It helps maintain proper sway bar function and consistent handling. 🔧 Key Features ✔ Replacement sway bar bushings✔ Maintains smooth sway bar operation✔ Supports consistent handling✔ Direct fit design 📦 Includes (1) Sway Bar Bushing Set 🚗 Compatibility Team Losi Racing 22X-4 2.0 AC Team Losi Racing 22X-4 2.0 DC Ideal for replacing worn components, this set helps keep your sway bar system working smoothly and reliably.        

Read more less

Differential Inserts Overview:This is a replacement differential height inserts set designed for the Team Losi Racing 22X-4 2.0 platform. It allows proper positioning of the differential to maintain drivetrain alignment and performance. 🔧 Key Features ✔ Replacement differential height inserts✔ Helps maintain proper drivetrain alignment✔ Supports consistent performance✔ Direct fit design 📦 Includes (1) Differential Height Inserts Set 🚗 Compatibility Team Losi Racing 22X-4 2.0 AC Team Losi Racing 22X-4 2.0 DC Ideal for maintenance or rebuilds, this set helps ensure your differential is positioned correctly for smooth and reliable operation.      

Read more less

Shock Standoff Overview:The Team Losi Racing 22X-4 2.0 Steel Snap-Fit Shock Standoffs Set is a replacement and upgrade designed to provide durable, consistent shock mounting. Built from high-strength steel, these standoffs help maintain precise suspension performance under demanding conditions. 🏁 About the Steel Shock Standoffs 💪 Strength & Reliability Constructed from durable steel, these standoffs offer excellent rigidity to keep shocks properly aligned during hard landings and aggressive driving. 🔧 Snap-Fit Compatibility Designed to work with TLR Snap-Fit Shock Caps (TLR-1283 – sold separately), providing a secure and dependable connection. 🛡️ Durable Finish A black oxide coating helps resist rust and wear, making them ideal for long-term use in racing environments. 🔧 Key Features ✔ High-strength steel construction✔ Compatible with TLR Snap-Fit Shock Caps (TLR-1283)✔ Black oxide coating for corrosion resistance✔ Rigid design maintains shock alignment✔ Durable for long-lasting performance 📦 Includes (1) Steel Snap-Fit Shock Standoffs Set 🚗 Compatibility Team Losi Racing 22X-4 2.0 AC Team Losi Racing 22X-4 2.0 DC A durable upgrade that helps keep your shocks mounted securely and performing consistently under race conditions.    

Read more less

Spring & Collar Overview:This is a replacement decoupled slipper spring and collar set designed for the Team Losi Racing 22X-4 2.0 platform. It is intended for use with the decoupled slipper system to maintain proper drivetrain function. 🔧 Key Features ✔ Replacement slipper spring and collar set✔ Designed for decoupled slipper setup✔ Maintains consistent drivetrain performance✔ Direct fit design 📦 Includes (1) Decoupled Slipper Spring & Collar Set 🚗 Compatibility Team Losi Racing 22X-4 2.0 AC Team Losi Racing 22X-4 2.0 DC Requires TLR-1298 Decoupled Slipper Assembly (sold separately) Ideal for replacing worn components, this set helps keep your slipper system operating smoothly and consistently.  

Read more less

Spindle Arms Overview:This is a replacement set of carbon fiber spindle arms designed for the Team Losi Racing 22X-4 2.0 AC platform. They maintain proper front suspension geometry while offering a lightweight, rigid design. 🔧 Key Features ✔ Carbon fiber construction✔ Lightweight and rigid design✔ Maintains suspension geometry✔ Direct fit replacement 📦 Includes (2) Carbon Fiber Spindle Arms 🚗 Compatibility Team Losi Racing 22X-4 2.0 AC Ideal for replacing worn or damaged components, these spindle arms help keep your front suspension performing consistently.  

Read more less

Shock Caps Overview:The Team Losi Racing 22X-4 2.0 Snap-Fit Shock Caps are an optional upgrade designed to improve shock consistency and simplify maintenance. With a refined internal design and easy-to-use bleeder system, they help deliver more predictable suspension performance. 🏁 About the Snap-Fit Shock Caps 🎯 Smoother Performance The dome-style internal shape helps shocks compress and rebound more consistently, improving landing control—especially on jump-heavy tracks. 🛠️ Easier Shock Builds A bleeder-style design reduces trapped air, making shock building quicker and more repeatable from run to run. 🔧 Secure & Serviceable The snap-fit connection provides a secure hold while still allowing quick servicing when needed. 🔧 Key Features ✔ Dome-style internal design for improved landing control✔ Bleeder-style cap for easier shock builds✔ Snap-fit design for secure attachment✔ Helps improve suspension consistency✔ Works with optional TLR-1271 shock standoffs (sold separately) 📦 Includes (2) Snap-Fit Shock Caps 🚗 Compatibility Team Losi Racing 22X-4 2.0 AC Team Losi Racing 22X-4 2.0 DC A simple upgrade that improves shock performance and consistency, these caps help fine-tune your suspension for better control on the track.        

Read more less

Outdrive Overview:This is a replacement rear decoupled slipper outdrive designed for the Team Losi Racing 22X-4 2.0 platform. It is intended for use with the decoupled slipper system to maintain proper drivetrain function. 🔧 Key Features ✔ Replacement rear slipper outdrive✔ Designed for decoupled slipper setup✔ Maintains drivetrain performance✔ Direct fit design 📦 Includes (1) Rear Decoupled Slipper Outdrive 🚗 Compatibility Team Losi Racing 22X-4 2.0 AC Team Losi Racing 22X-4 2.0 DC Requires TLR-1298 Decoupled Slipper Assembly (sold separately) Ideal for replacing worn components, this outdrive helps keep your slipper system working smoothly and consistently.      

Read more less

Shock Tower Overview:This is a replacement carbon fiber rear shock tower designed for the Team Losi Racing 22X-4 2.0 platform. It maintains proper rear suspension mounting and helps ensure consistent performance. 🔧 Key Features ✔ Carbon fiber construction✔ Maintains rear suspension geometry✔ Lightweight and rigid design✔ Direct fit replacement 📦 Includes (1) Carbon Fiber Rear Shock Tower (Standard) 🚗 Compatibility Team Losi Racing 22X-4 2.0 AC Team Losi Racing 22X-4 2.0 DC Ideal for replacing worn or damaged components, this shock tower helps keep your rear suspension working consistently and reliably.    

Read more less

Suspension Arms Overview:The Team Losi Racing 22X-4 2.0 Front “Gullwing” Suspension Arms (Stiff) are an optional upgrade designed to deliver a more rigid front-end feel and improved consistency. Built for competitive racing, these arms enhance suspension geometry while maintaining durability. 🏁 About the Gullwing Suspension Arms 📐 Improved Geometry The gullwing design lowers the arm profile to increase clearance and improve how the buggy settles after jumps. This helps deliver more predictable landings and smoother suspension movement across rough track sections. 💪 Stiff Compound Performance The stiff version provides a firmer feel with less flex, improving precision and consistency—especially on higher-grip tracks where stability is key. 🔧 Key Features ✔ High-strength composite construction✔ Gullwing profile for reduced weight✔ Increased clearance for improved suspension movement✔ Stiff compound for improved precision and stability✔ Enhances front-end geometry and handling✔ Designed for competitive 4WD buggy racing 📦 Includes (1) Left Front “Gullwing” Suspension Arm (Stiff) (1) Right Front “Gullwing” Suspension Arm (Stiff) 🚗 Compatibility Team Losi Racing 22X-4 2.0 AC Team Losi Racing 22X-4 2.0 DC A performance-focused upgrade for racers looking for a more stable, precise front-end feel on high-traction tracks.    

Read more less