Compatible with iCharger, iSDT, and SkyRC Chargers Overview:The TQ Wire XT60 2S Charge Cable delivers the perfect balance of premium materials, versatile connectivity, and durability. Designed for serious RC racers and hobbyists, this lead makes charging your 2S LiPo batteries easier, cleaner, and more reliable—whether you’re in the pit or at the track. About the XT60 2S Charge Cable Built for Performance and DurabilityFeaturing dual-size stepped bullets (4mm & 5mm), this cable ensures compatibility with a wide range of LiPo batteries. The 2-foot cable uses 12-gauge high-strand silicone wire wrapped in protective black nylon mesh, giving you maximum current flow and long-lasting flexibility. The XT60 connector provides a secure, low-resistance connection to your charger, compatible with popular models such as the Junsi X6 iCharger, iSDT, and SkyRC B6, as well as other chargers that use an XT60 output. Premium Design FeaturesTQ Wire went the extra mile with a molded strain relief housing around the bullet connectors and balance port, ensuring a stronger connection and minimizing wire fatigue. Integrated “grippers” make it easy to remove the bullets from your battery safely and efficiently—no more struggling with tight fits or risking wire damage. Features: XT60 connector for charger connection (iCharger/iSDT compatible) 4mm & 5mm stepped bullets fit most 2S LiPo packs Durable molded strain relief for long life and safety Integrated “grippers” for easy battery removal Heavy-duty 12-gauge silicone wire for efficient power transfer Wrapped in black nylon mesh for protection and clean looks 2-foot length provides ample reach without clutter Specifications: Specification Details Length 2 feet (610mm) Wire Gauge 12 AWG Charger Connector XT60 Battery Connectors 4mm & 5mm Stepped Bullets Balance Port XH Compatibility Junsi X6 iCharger, SkyRC B6, iSDT, and any XT60-output charger Includes: (1) TQ Wire 2S XT60 Charge Cable with 4mm/5mm Bullets Note:TQ Wire also offers a version with low-profile 90° tubes instead of the XT60 connector for alternative setups.

Read more less

Overview:Secure your battery with confidence using the Team Associated RC10B7 Factory Team Battery Mount Set. Designed as a precision upgrade over the standard mounts, this Factory Team kit delivers improved strength, reduced flex, and a cleaner look for your B7 buggy. With its lightweight design and race-proven durability, it’s the perfect addition for serious racers who demand reliability and performance. Features: Factory Team precision-machined components for strength and fit Securely holds battery in place under high loads and hard landings Lightweight design reduces unnecessary weight Provides a cleaner, more professional chassis layout Genuine Team Associated Factory Team upgrade Compatibility: Team Associated RC10B7 1/10 2WD Buggy Includes: (1) Factory Team Battery Mount Set (with mounting hardware) Part Number: 92482 ⚡ Pro Tip: Pair this with the B7 Factory Team Carbon Side Rails (92483) for the ultimate lightweight and rigid chassis setup.  

Read more less

Upgrade or refresh your RC10B7’s steering and suspension with this genuine Team Associated rod end set. Designed specifically for the Team Associated RC10B7 1/10 buggy, these rod ends deliver the precision fit, smooth articulation, and durability you need to keep your buggy performing at its best. 📦 Includes: (16) Rod Ends 🔧 Compatibility: Team Associated RC10B7 1/10 Buggy 💡 Perfect for replacing worn or damaged rod ends to restore crisp steering response and suspension performance.

Read more less

ProTek RC 2 Cell LiPo Battery: 7.6V High-Voltage Performance The ProTek R/C ULCG (Ultra Low Center of Gravity) 2S 130C Graphene + HV 4400mAh Shorty LiPo Battery is a great battery option for anyone looking for a lightweight, shorty style battery. The HV 4400mAh is the lightest (154 grams) and thinnest (18.3mm) Shorty race battery ProTek has produced to date, all while delivering race winning and industry leading capacity and peformance. When compared to standard LiPo and LiHV, Silicon Graphene cells deliver improved efficiency, lower operating temperatures, lower internal resistance, better run time, increased cycle life and increased voltage. This pack is ideal pack for 2WD and 4WD modified racing, or stock class racers that want optimum voltage for the entire run. The improved efficiency of this pack will allow for lower operating temperatures and lower internal resistance. This gives users a more consistent battery pack. ProTek Graphene + 130C Packs deliver the power needed by serious racers and enthusiasts alike. Lab testing has shown that ProTek R/C Silicon Graphene packs have double the cycle life when charged at 1C rates, and can be charged at higher amp rates, with less risk of damage to the pack. More importantly, the discharge curve is flatter, meaning the cells maintain higher voltage throughout the discharge cycle with no significant drop off. Additionally, when compared to conventional LiPo batteries Silicon Graphene batteries are lighter, providing a higher capacity per gram ratio. With 7.6V nominal voltage, 130C discharge ratings, incredibly high charge rates and ten different models to choose from, ProTek R/C 130C Graphene + packs are perfect for racers and bashers that demand the absolute best. Features: Lighter and thinner than previous hardcase 2S LiPo packs Provides great runtime, with incredible voltage and punch Silicone Graphene can handle more abuse and deliver more current than a standard LiPo battery Improved efficiency, lower operating temperatures, and lower internal resistance! 10C max charge rates - 1C charge rate recommended for longest life Perfect for stock class racers looking to shave grams IMPORTANT LITHIUM POLYMER SAFETY INFORMATION DO NOT leave a battery in your model when charging DO NOT leave lithium batteries unattended when charging ALWAYS balance charge lithium battery ALWAYS use a LiPo Safe charging bag/box YOU MUST use a Li-Poly specific charger to charge lithium batteries (NiMH or NiCD only chargers WILL NOT WORK!) YOU MUST not over discharge lithium battery packs READ & UNDERSTAND the instructions carefully before operating this battery NOTE: When using high energy Li-Polymer Batteries, please do not over-discharge or over-charge batteries as this will result in overheated batteries. Discharging capacity can't exceed 80% of the max capacity of the pack after full charging to ensure a good cycle performance. It is recommended to fully charge a brand new battery before using and only discharge the battery 50% for the first 5 cycles. Always monitor race time and/or set a low voltage warning on ESC (End voltage cannot be lower than 3.2v per cell). Do not use a battery that has too low a voltage. Do not expose batteries to sunshine or store/charge batteries at temperatures above 35°C or in a closed car. The high-temperature environment could cause damage to the pack or make it burst. If the battery becomes hot while fast charging, high current discharging, or racing, do not charge it until it has cooled completely. Wait about 20 mins, then inspect prior to recharging. Includes: (1) ProTek R/C Battery (2) 5mm to 4mm Bullet Reducers (2) 5mm Bullet Connectors (1) 2mm Balance Bullet Connector Specifications

Read more less

Step up your racing game with these Stiffezel Front Suspension Arms for the TLR 22X! Engineered for high-performance racers, these arms provide increased stiffness and durability to enhance cornering, reduce flex, and maximize your control on high-bite tracks. 🔥 Features: Precision-engineered for the TLR 22X platform Stiffezel material delivers superior rigidity over stock arms Sharper steering response and enhanced high-speed handling Reduced flex = more precise suspension feel Perfect for traction-rich surfaces 📦 Includes:(2) Stiffezel Front Suspension Arms ✅ Compatibility:• TLR 22X• TLR 22X-4• TLR 22X-4 Elite• Losi 22S Sprint  

Read more less

This is a replacement Stiffezel Rear Arm Set for the Team Losi Racing 22 5.0 DC Elite 1/10 2WD Electric Buggy. Designed for VHA (Variable Hinge Angle) setups, these rear arms are optimized for dirt and clay tracks, offering enhanced rigidity and consistent performance. ✅ Fits:• TLR 22 5.0 DC Elite (2WD Buggy) ✅ Includes:• (1) Pair of VHA Stiffezel Rear Suspension Arms Perfect for racers looking to maintain top-tier handling and durability on loose surfaces.

Read more less

Upgrade your 22 5.0 series with precision gearing using the TLR 48 Pitch SHDS Spur Gear. Designed for use with the optional TLR Complete SHD Slipper System (TLR232085), these spur gears offer smooth, consistent performance and are available in a variety of tooth counts from 69T to 81T. ✅ Compatible with:• Losi 22 5.0 (with SHD Slipper System) ✅ Features:• High-strength composite construction• Available in multiple tooth counts (69T–81T)• Designed for 48 pitch setups• Perfect for fine-tuning your gear ratio 📦 Includes:(1) SHDS Spur Gear (choose tooth count)

Read more less

Team Associated CVA/Wheel Hex Pin (4) [91436]🔩 Lock It Down with Precision!The Team Associated CVA/Wheel Hex Pin Set is your go-to solution for keeping your drivetrain tight and reliable. These precision steel pins are perfect replacements for connecting rear CVA axles and bones, or securing wheel hexes to both front and rear axles. 🛠 Features:✅ Durable steel construction✅ Perfect fit for CVA assemblies and wheel hexes✅ Essential for smooth, consistent performance 📦 Includes:(4) CVA/Wheel Hex Pins 🔥 Part Number: 91436🏁 Compatible with multiple Team Associated platforms

Read more less

Upgrade your drivetrain with the Team Associated Factory Team 11mm Octalock LCF Slipper Pad. Originally launched with the RC10B74.1 buggy, this pad is designed to work with Octalock spur gears and offers smoother, more consistent slipper performance. It also serves as an optional upgrade for the original RC10 B74 series. ✅ Factory Team Performance – Designed for competitive precision and durability✅ Octalock Compatible – Works with Team Associated Octalock spur gears✅ Optional Upgrade – Updates older B74 models to the latest slipper assembly✅ Race Proven – Trusted by Team Associated drivers worldwide Compatibility: Team Associated RC10 B74 (original) Team Associated RC10 B74.1 Team Associated RC10 B74.1D A must-have for serious racers, the 11mm Octalock LCF Slipper Pad keeps your buggy smooth, efficient, and race-ready.

Read more less

Team Associated RC10B7 Factory Team Carbon Gearbox – 92406Upgrade your RC10B7 or B7D with the Factory Team Carbon Laydown Gearbox. Built with carbon-infused material, this optional gearbox delivers enhanced rigidity and long-lasting durability. Ideal for racers chasing ultimate chassis stiffness and consistent power transfer. Note: Increased rigidity may reduce rear traction depending on track conditions. ✔️ Carbon-infused for superior stiffness and durability✔️ Designed for RC10B7 and RC10B7D 2WD buggies✔️ Laydown configuration for optimized weight distribution✔️ Genuine Factory Team performance part✔️ Includes: (1) Carbon laydown gearbox housing Built to handle high power with Factory Team precision. 🏁  

Read more less

Team Associated RC10B7 Idler Gears (3) [92421] 🌀 Smooth Power, Every LapKeep the drivetrain of your B7 running smooth and strong with these genuine Team Associated RC10B7 Idler Gears. Designed for durability and precision, this 3-gear set ensures optimal power transfer and consistent performance during hard racing or long practice days. 🛠️ Includes:✅ (3) Idler Gears 🔩 Part Number: 92421🚗 Compatible With: Team Associated RC10 B7 Team Associated RC10 B7D

Read more less

Team Associated RC10B7 Shock Tower Covers & Upper Wing Mount [92487] 💥 Upgrade your B7 with Precision Fit & Factory Style!Keep your buggy looking factory fresh and race-ready with the Team Associated RC10B7 Shock Tower Covers & Upper Wing Mount. Designed specifically for the RC10B7 platform, this set adds clean protection for your shock towers while locking down your rear wing with a durable, lightweight upper mount setup. 🏁 Why You’ll Love It:✅ Direct fit for the B7 platform—no mods needed🛡️ Protects your shock towers from dirt, debris, and damage🚀 Lightweight upper wing mount keeps your wing locked and stable🔩 Includes all the hardware you need—bolt it on and go! 📦 Includes:(2) Front Shock Tower Covers(1) Rear Shock Tower Cover(1) Upper Wing Mount SetMounting Hardware 🛠️ Part Number: 92487🏎️ Vehicle Compatibility: Team Associated RC10B7  

Read more less

1up Racing Shock & Diff Oil Carrier Bag – Trackside Tuning, Organized 🎯 Keep your oils organized and protected with the 1up Racing Shock & Diff Oil Carrier Bag — the perfect solution for racers who bring the whole tuning bench to the track. Designed to fit 12 bottles of 1up Racing Pure Silicone Oils, this carrier keeps your setup clean, efficient, and ready for any condition. 💼 Featuring rigid, oil-resistant internal dividers and a durable zip-up enclosure, this bag is built to take spills, bumps, and race day chaos in stride. A woven carry handle and bold 1up Racing logo complete the look, making this the go-to organizer for serious racers. ✨ Key Features: 🧴 12 Dedicated Bottle Slots – Fits 41x41x105mm bottles like a glove🧽 Rigid Oil-Resistant Dividers – Won’t break down or absorb spills🧵 Zipper Enclosure – Securely seals your oils for transport🪢 Woven Carry Handle – Easy grab-and-go for race day🔥 Signature 1up Racing Look – Clean and professional trackside presence 📏 Dimensions: Individual Slots: 41mm x 41mm x 105mm\ Overall Bag Size: 22 x 17 x 12cm 🧰 Stay Dialed In – Wherever You Race From shock tuning to diff balancing, this carrier keeps your essential fluids safe, sorted, and spill-proof. No more mess. No more guesswork. 💡 Stay Race-Ready – Grab the 1up Oil Carrier Bag Today!

Read more less

When performance matters, the Team Exalt X-Rated 5700mAh 2S LiPo is your ultimate power source. Designed with cutting-edge Silicon Graphene technology, this pack delivers exceptional efficiency, low resistance, and long-lasting power — giving you the edge you need lap after lap. ⚡ X-Rated Series Performance Highlights: 135C Continuous / 270C Burst Discharge Rate Silicon Graphene Cell Technology for improved efficiency and cycle life Flat Discharge Curve maintains consistent voltage under load Low Internal Resistance for cooler operation and more punch 5mm High-Amp Bullet Connectors ensure high current throughput ROAR Approval Pending 📊 Battery Specifications: Capacity: 5700mAh Voltage: 7.4V (2S) Discharge Rate: 135C Burst Rate: 270C Weight: 227g ± Dimensions: 96 x 47 x 25.1mm (LxWxH) Connector Type: 5mm Bullets Whether you're pushing your electronics to the limit or chasing consistency in long mains, the EXA3202 X-Rated LiPo gives you the confidence to run harder and longer.

Read more less

Team Exalt X-Rated 2S 135C HVX LiHV LCG Shorty Battery (7.6V/5100mAh) High Voltage. Race Ready. ROAR Approved. Give your setup the edge it deserves with the Team Exalt X-Rated HVX LiHV Battery. Built for competition, this 7.6V 2S LCG pack combines advanced chemistry, low resistance, and Silicone Graphene tech for powerful, consistent output and longer cycle life. The hardcase shorty design makes it perfect for tight 1/10 chassis builds where balance and performance are critical. ⚙️ Features: ✅ 135C Continuous Discharge Rate for maximum punch ⚡ LiHV (7.6V) design for high-voltage performance 🧠 Silicone Graphene Technology for lower IR and longer life 🔌 5mm High-Amp Bullet Connectors included 🏁 ROAR Approved since Dec. 2024 – race legal and track ready 🧊 LCG Hardcase to fit snug in shorty-compatible chassis 📐 Specifications: Voltage: 7.6V (LiHV 2S2P) Capacity: 5100mAh Continuous Discharge: 135C Dimensions: 96 x 46 x 22.5mm (LxWxH) Weight: 210g (7.40oz) Connector Type: 5mm bullets Balance Plug: 2mm bullets Watt Hours: 38.8Wh Charge Rate: 1C Max Configuration: LCG Hardcase Shorty ROAR Approved ✅ 💥 Optimized for elite 1/10 scale racing in both off-road and on-road platforms.Stay cool, stay powerful — Exalt X-Rated gets you to the finish line faster.  

Read more less

JConcepts F2 RC10B7 Clear Body w/ Wings (Standard Weight)📦 Includes Two Carpet / Turf / Dirt Wings The legendary F2 body by JConcepts is now available for the Team Associated RC10B7 and B7D platforms! Featuring the iconic Finnisher “V” layout, louvered roof, and double-step side pods, the F2 delivers sharp performance with a proven championship pedigree. Whether you’re racing on carpet, turf, or dirt, this body provides the precision, downforce, and durability racers demand. 🔧 Features: 🔹 Designed for the Team Associated RC10B7 / B7D 🔹 Original JConcepts F2 styling with Finnisher “V” details 🔹 Forward-biased cab and powerful windshield angle for precise steering 🔹 Tight profile follows chassis perimeter for clean fit 🔹 Slim nose fits over top deck and under shock tower 🔹 Louvered roof and double-step side pods for enhanced airflow 🔹 Built-in clearance for spur gear guard 🔹 Broad rear mounting ledge for secure fit 🔹 Clear polycarbonate with protective film (standard weight) 🔹 Includes window masks & JConcepts decal sheet 🏁 Includes: (1) F2 Clear Body (Standard Thickness) (2) 6.5" Carpet / Turf / Dirt Wings (1) Window Mask Set (1) JConcepts Decal Sheet 🛠️ Body requires trimming and painting. Compatible with RC10B7 and RC10B7D chassis.

Read more less

Rear grip you can trust. The Avid Sweeper 2.2” Rear was designed for racers who want strong forward drive and dependable side bite without the rear feeling edgy or unpredictable. Built around an aggressive arched chevron pin layout, this tire keeps the back of the car planted whether you’re powering out of a corner or carrying speed through long sweepers. Push harder. Stay confident. Repeat every lap. 🏁 Compounds A3 Medium (Green) Ideal for high-bite office carpet Great for tracks that allow traction compound Excellent longevity for long practice days Balanced grip and wear A4 Soft (Red) Designed for lower-bite CRC, Beach, and EOS-style carpets Ideal where traction compound is not allowed Maximum forward and steering grip Slightly increased wear for peak performance 🛠 Design Details That Matter ✔ Arched Chevron Pin Layout Engineered for exceptional side bite and stability under load. The design keeps the rear planted through long sweepers and high-speed transitions. When you lean on it, it stays planted. ✔ Directional Design These tires are directional — the center tip of the chevron points toward the car. To eliminate mounting mistakes, directional arrows are integrated into the debossed Avid sidewall logo so you can confidently mount them correctly every time. ✔ Debossed Sidewall Logos No raised lettering to grab carpet fibers No glue cracking around logos Clean, consistent sidewalls ✔ Wide-Base Pin Structure Each pin features a larger base for improved support under load, creating predictable side bite and consistent rear grip when throttle control matters most. ✔ Soft Grey Foams Included Includes soft grey foams (recommended trim width: 35mm). Trimming improves: Stability on sideways landings Corner forgiveness Side bite consistency Overall rear confidence If you’re building a carpet setup that rewards aggression while staying stable, the Avid Sweeper Rear delivers planted rear grip you can rely on every lap.    

Read more less

  The Team Associated Factory Team 5x12x4mm Bearings are precision replacement bearings designed to restore smooth operation and reliable performance in critical drivetrain and rotating assemblies. Built to Factory Team standards, these bearings help reduce friction, improve efficiency, and maintain consistent performance on the track. Ideal for replacing worn bearings during maintenance or rebuilds to keep your vehicle operating at peak performance. Features Genuine Team Associated Factory Team bearings Precision construction for smooth rotation Helps reduce drag and improve efficiency Ideal for maintenance or performance rebuilds Factory-fit replacement Includes (4) 5x12x4mm Bearings Compatibility Team Associated RC10 B74 Other applications requiring 5x12x4mm bearings A dependable replacement choice for maintaining smooth, consistent performance in your RC vehicle. 🏁

Read more less

The R1WURKS Slipper Eliminator Gear is a precision-machined 48-pitch spur gear designed specifically for use with slipper eliminator hubs. Made from POM (Polyoxymethylene), this gear delivers low friction, excellent wear resistance, and consistent performance—ideal for stock racers running a locked-out drivetrain. Featuring a standard inner bore and bolt pattern, this gear fits most slipper eliminator hubs, including the R1WURKS B7 hub. Features & Specifications 48-Pitch spur gear Precision machined for accuracy and concentricity Made from POM (Polyoxymethylene) Low friction High durability Excellent wear resistance Standard inner bore and bolt pattern Designed for slipper eliminator setups Options 69 Tooth – 900055-69 72 Tooth – 900055-72 Includes (1) Precision machined slipper eliminator gear(Select desired tooth count) Fitment Team Associated RC10 B7 fitted with R1WURKS 900054-1 B7 Slipper Eliminator Hub or similar aftermarket hub Team Associated RC10 B7D fitted with R1WURKS 900054-1 B7 Slipper Eliminator Hub or similar aftermarket hub A lightweight, durable spur gear built for racers running slipper eliminators who want smooth power transfer and long service life. 🏁

Read more less

Keep your differential running smooth and leak-free with the Team Associated 91782 Gear Differential Seals. Designed as a direct replacement for the B6.1 and B6.1D platforms, these seals restore proper diff performance, maintain consistent fluid viscosity, and help extend the life of your internal diff components. Perfect for routine maintenance or a full differential rebuild. Features Genuine Team Associated replacement seals Ensures proper diff sealing and fluid retention Helps maintain smooth, consistent differential action Ideal for rebuilds, maintenance, or performance refresh Compatible With B6.1 B6.1D And other Team Associated models using the same gear differential design

Read more less

Dial in your car’s balance with precision—anywhere on the chassis.The ProTek RC Self Stick Chassis Weight Strips give racers a compact, customizable way to fine-tune weight bias, improve stability, and optimize handling on any track surface. About the Chassis Weights Each strip includes twelve 5g weights (24 total), backed with strong pre-applied adhesive.Their compact 20×9.4×4.4mm size makes them perfect for tight mounting locations—lay them flat, stack them, or tuck them into hard-to-reach spots to get your setup dialed exactly how you want. Great for: Balancing left/right weight Adding traction on slick tracks Fine-tuning front/rear bias Stabilizing high-powered builds Whether you're prepping for carpet, dirt, oval, or on-road, these weights give you total control over your setup. Features Compact 20×9.4×4.4mm design fits tight spaces Strong pre-applied sticky tape Perfect for fine-tuning chassis weight bias 120g total weight per package Stackable for precise tuning Includes (24) 5g Self-Stick Chassis Weights (12 per strip)

Read more less

  Power. Precision. Performance. Upgrade your ESC with the Hobbywing Module-X Non-Polarity Capacitor Module — engineered to deliver faster throttle response, smoother acceleration, and reduced electrical noise for ultimate racing consistency. Perfect for 1/10-scale Modified or Stock setups, this high-efficiency capacitor pack enhances performance without adding unnecessary weight or bulk. Race-Grade EfficiencyThe Module-X features low impedance and high ripple current endurance, allowing it to absorb voltage spikes and minimize interference caused by rapid ESC switching. The result: improved startup acceleration, lower heat generation, and longer ESC lifespan. Compact and lightweight, it mounts easily on your chassis for a clean, professional installation. ⚡ Features: Greatly improves startup acceleration and throttle response Reduces interference from ESC power switching Low impedance design for higher efficiency Minimal heat generation under load Small, lightweight, and easy to install Designed for 1/10-scale racing applications 📏 Specifications: Size: Standard (1/10-scale) 📦 Includes: (1) Hobbywing Module-X Modified/Stock Non-Polarity Capacitor Module  

Read more less

Upgrade your suspension setup with the Factory Team 13mm Shock Collar and Seal Retainer Set from Team Associated. This black anodized aluminum set is designed to increase durability and offer a clean, high-performance look. 📦 Includes: (2) Black aluminum shock collars (2) Black aluminum seal retainers ⚙️ Key Features: CNC-machined 6061-T6 aluminum construction Black anodized for a sleek, factory appearance Increased strength over stock plastic parts Designed for precision fit and long-term durability Factory Team tuning part ✅ Compatibility:Fits Team Associated 13mm shocks, commonly used on: RC10B6.4 / B6.4D RC10B74.2 / B74.2D RC10T6.4 RC10SC6.4 And other vehicles equipped with Team Associated 13mm shocks 🏁 Ideal For:Racers looking to improve the consistency, look, and longevity of their suspension setup. Great for both carpet and dirt track performance.

Read more less

Upgrade or replace with precision using the Team Associated RC10B6.4 Front Bulkhead Set, featuring both 0° and 2.5° kick-up options. This set is a direct replacement for the B6.4 front bulkhead and offers adjustability to fine-tune your front-end geometry depending on track conditions and driving style. 📦 Includes: (1) 0° Front Bulkhead (1) 2.5° Front Bulkhead 📌 Compatibility: Team Associated RC10B6.4 RC10B6.4D May also be compatible with other B6 series models with slight adjustments 🔧 Key Benefits: Multiple kick-up angles for tuning front-end response High-quality composite material for durability Factory Team precision fitment and finish Ideal for racers looking to customize handling feel on entry and through corners. Keep both angles on hand and swap as needed to match the track!

Read more less

Fine-tune your rear suspension geometry with the RC10B74 Rear Hub Insert Set from Team Associated. These precision-molded inserts allow you to customize hub adjustments for optimized handling on a variety of track surfaces. 🔧 Key Features: Factory Team precision for pro-level tuning Multiple offset options for customized camber and toe settings High-quality molded composite for durability Direct fit for RC10B74 rear hubs Ideal for racers seeking performance edge 📦 Includes: (1) Set of Rear Hub Inserts (multiple offsets) ✅ Compatibility: Team Associated RC10B74 May fit other models in the B74 lineup (check manual for fitment) Whether you're tuning for more cornering grip or better straight-line stability, this insert set gives you the flexibility you need to dial in your setup.

Read more less

Maximize efficiency and longevity with the Team Associated RC10B7 Factory Team Bearing Set. Featuring high-quality sealed bearings, this upgrade reduces friction, improves drivetrain smoothness, and delivers long-lasting, trouble-free performance for competitive racing. Features: Premium sealed bearings for protection against dirt and debris Low-friction design for smoother, more efficient operation Factory Team quality for professional-level performance and durability Direct fit for the RC10B7 buggy Includes: (1) Complete Factory Team Bearing Set for RC10B7 A must-have upgrade for racers who want maximum drivetrain efficiency and reliability.

Read more less

  Keep your transmission running smooth with this genuine TLR 22 4.0 laydown idler gear and shaft set. Designed specifically for the laydown transmission setup, this replacement set includes everything needed to restore drivetrain performance. ✅ Includes:• (2) Idler Gears• (1) Idler Shaft ✅ Compatible with: TLR 22 4.0 Laydown Transmission✅ OEM replacement for precise fit and function✅ Built tough for high-performance racing Essential for keeping your TLR 22 4.0 dialed in and track-ready.

Read more less

Team Associated Rear Suspension Arms, Hard: RC10B74   ASC92131

Read more less

Team Associated RC10B7 HD Gear Differential Outdrives (2) – Built Tough for Maximum Power Transfer! ⚙️ Maintain your RC10B7 or RC10B7D’s drivetrain strength with the Team Associated Factory Team HD Gear Differential Outdrives!These heavy-duty outdrives are designed to handle the intense loads of competitive racing, ensuring your buggy stays durable and consistent under extreme conditions. ✨ Key Features: ⚙️ Heavy-Duty Construction – Engineered to handle the rigors of intense 1/10 scale racing 🔧 Direct Replacement Design – Perfect fit for the Team Associated RC10B7 and B7D gear differentials 🏁 Improved Durability – Strengthens the drivetrain for better long-term performance 🛡️ Trusted Factory Team Quality – Race-proven reliability from Team Associated 📦 Includes: ✔ (2) Heavy-Duty Gear Differential Outdrives 📦 Compatibility: ✅ Team Associated RC10B7 ✅ Team Associated RC10B7D 📌 Note: 🔹 Direct fit for stock RC10B7 and B7D differentials.🔹 Ideal for racers looking to enhance drivetrain longevity and consistency under high loads. 🏁 Drive harder and push your limits with the Factory Team HD Gear Differential Outdrives! 🔥 Upgrade today for maximum durability on race day with Team Associated! 🔥  

Read more less

Gens Ace Redline 2.0 2S Shorty LiHV Battery (7.6V/6000mAh) – 140C Burst Race-Ready Power. Expanded Runtime. Shorty Format. Push your limits with the Gens Ace Redline 2.0 6000mAh LiHV Shorty — a premium high-discharge racing battery built for domination. Engineered with Silicon Graphene technology, this pack delivers stable voltage, a flatter discharge curve, and long-term cycle performance — all in a low-profile shorty size perfect for 1/10 scale competitive setups. ⚙️ Features: ⚡ 140C Continuous Discharge – massive power delivery for serious racers 🔋 7.6V LiHV / 6000mAh Capacity – extended runtime and high-voltage performance 🔌 5mm Bullet Connectors – high-amp, secure connectivity 🪶 Shorty LCG Design – optimized for low center of gravity setups 🔬 Factory-matched cells for superior balance and reliability 📐 Specifications: Voltage: 7.6V (2S LiHV) Capacity: 6000mAh Continuous Discharge: 140C Configuration: 2S2P Watt Hours: 45.6Wh Connector: 5mm Bullet Balance Plug: 2mm Bullet Dimensions: 96 x 47 x 25mm Weight: 220g (7.76oz) 🏁 For racers needing a perfect blend of raw power, extended runtime, and reliable heat management, the Gens Ace Redline 2.0 6000mAh Shorty delivers. Built for the podium.

Read more less

Keep your drivetrain spinning at peak efficiency with R1WURKS DOPE Double Ceramic High Speed Bearing Lube. Designed specifically for RC racing applications, this premium lubricant provides smooth, high-speed bearing performance while minimizing friction and resistance. With its low-viscosity formula, this oil delivers excellent lubrication while helping flush dirt and contaminants from bearings, keeping them clean and operating smoothly. ⚡ Built for High-Speed Racing This high-speed formulation provides the perfect balance of lubrication and efficiency. The low viscosity reduces drag inside the bearing, allowing for maximum RPM and minimal friction, giving racers the performance advantage they need on the track. 🔧 Cleans While It Lubricates Unlike heavier oils that can slow bearings down, this formula helps flush contaminants out of the bearing while maintaining proper lubrication. This keeps bearings running cleaner and extending their service life. 🏁 Consistent Long-Term Performance By providing just the right amount of lubrication, DOPE High Speed Bearing Lube protects bearings from wear while maintaining the free-spinning performance required for competitive racing. ⚙️ Features Double ceramic bearing lubricant Specially formulated for RC racing applications Low-viscosity formula for maximum speed Reduces friction and drivetrain resistance Helps flush dirt and contaminants from bearings Maintains smooth bearing operation Provides long-lasting protection against wear 📦 Includes (1) 10ml Bottle of R1WURKS DOPE Double Ceramic High Speed Bearing Lube An excellent maintenance product for racers looking to maximize bearing speed, reduce friction, and maintain peak drivetrain performance.  

Read more less

The Team Associated 2.2" Front Buggy Wheels (White) are optional replacement wheels designed for 1/10 scale buggies using a 12mm hex setup. Built from durable nylon material, these wheels provide a strong yet lightweight solution for competitive racing. Designed for use with the Associated B4 and B4.1 when equipped with a 12mm hex conversion, these wheels offer reliable fitment and consistent performance on a variety of track surfaces. Features Genuine Team Associated optional wheels 2.2" front buggy wheel design 12mm hex fitment Durable white nylon construction Lightweight and race-ready Includes (2) 2.2" Front Buggy Wheels (White) Compatibility Team Associated B4 (with 12mm hex conversion) Team Associated B4.1 (with 12mm hex conversion) A dependable front wheel option built for strength, consistency, and competitive performance. 🏁  

Read more less

Protect your chassis and keep it looking factory fresh with the Team Losi Racing 22X Pre-Cut Chassis Protective Sheet. Designed specifically for the 22X platform, this peel-and-stick protector helps guard against scratches, scuffs, and wear from racing and practice—especially on abrasive track surfaces. Features & Benefits: Precision cut for a perfect fit on the TLR 22X chassis Durable surface protection against scrapes and wear Helps preserve chassis appearance and long-term performance Clean, professional look with official TLR branding Easy application that stays securely in place Includes: (1) 22X Pre-Cut Chassis Protective Sheet (Black) A simple upgrade that keeps your 22X protected and looking sharp race after race.  

Read more less

  Keep your electronics running cool and consistent with the Reedy Blackbox 510R 30×30×10mm Fan. Designed for high-performance RC applications, this compact, high-airflow fan helps reduce heat buildup under demanding race conditions. Features & Benefits: Compact 30×30×10mm size fits most ESC and motor mounts High-efficiency cooling to maintain peak performance Durable construction for reliable race-day use Includes mounting screws for easy installation What’s Included: Reedy Blackbox 510R fan Mounting hardware A simple, effective upgrade to protect your electronics and keep lap times consistent.  

Read more less

  Restore smooth drivetrain performance with the CVA Rebuild Kit from Team Associated. Designed to refresh your constant velocity driveshafts, this kit includes all the necessary components to bring worn CVAs back to peak condition—ensuring efficient power transfer and extended part life. 🔥 Key Features: Complete rebuild set for CVA driveshaft assemblies Helps restore smooth, efficient drivetrain operation Includes cross pins, barrels, and set screws Precision components built to factory specifications Ideal for regular maintenance or post-race refresh ✅ Compatibility: Compatible with a variety of Team Associated CVA-style driveshafts Commonly used in RC10B6, B6.1, B6.2, B6.3, and other AE 1/10 vehicles Check your vehicle’s manual for exact fitment 📦 Includes: (2) Cross Pins (2) Barrels (2) Set Screws ⚠️ Tip:Use thread lock on set screws and inspect parts regularly for wear to prevent drivetrain failure.

Read more less

Keep your suspension dialed in with these M3x48mm steel turnbuckles from Team Associated. Designed for strength and precision, they’re a direct replacement for worn or bent camber or steering links on a variety of Team Associated vehicles. 🔥 Key Features: High-strength steel construction for durability M3 thread with a 48mm (1.89") length Ideal for use in suspension and steering linkages Precision-machined threads for secure fit and adjustability Standard AE turnbuckle design for easy setup ✅ Compatibility: RC10B6 / B6.1 / B6.2 / B6.3 series (various locations) SC6.1 / T6.1 / T6.2 May also fit other models requiring M3x48mm turnbuckles — check your manual for fitment 📦 Includes: (2) M3 x 48mm Turnbuckles (1.89") ⚠️ Note:For proper installation, use a 3mm turnbuckle wrench and thread into ballcups evenly to maintain symmetry and alignment.

Read more less