Upgrade your micro servo for maximum durability! The Traxxas 2082R metal gear set is a direct replacement for the 2080R waterproof micro servo and can also be used to upgrade the 2080A servo—just swap out all the gears. 💪 Features: Hardened steel construction for superior strength and wear resistance Ideal for high-stress applications and extreme conditions Factory replacement for the Traxxas 2080R waterproof micro servo Upgrade option for 2080A servos (must replace all internal gears) 📦 Includes: (1) Complete Metal Gear Set (1) Packet of lithium grease for smooth operation Boost your steering performance and reliability—perfect for intense bashing or racing!

Read more less

💪 Beef Up Your Steering Power!The Traxxas 2270 is a high-torque, metal gear, waterproof digital servo designed to take your RC build to the next level. With a strong 236 oz-in of torque and rugged metal internals, it’s perfect for demanding applications like crawlers, monster trucks, and bashers. 🛠️ Specs That Deliver: Torque @ 6.0V: 236 oz-in Speed @ 6.0V: 0.175 sec/60° Gears: Full metal Case: Sealed, waterproof with O-rings Bearings: Full ball bearing support Size: 44.5 x 20 x 55mm (LxWxH) 🔄 Perfect Fit For:A powerful upgrade for many 1/10 Traxxas vehicles including Rustler, Slash, Stampede, TRX-4, TRX-6, and more. Reliable, powerful, and waterproof—this servo is ready for the tough stuff. 🛻⚡

Read more less

Dial in your gear ratio with this precision-cut 23-tooth 32-pitch pinion gear from Traxxas. Designed for motors with a 3mm shaft, this gear delivers smooth, efficient power transfer for high-performance setups. 🔧 Features: 23T pinion gear with 32-pitch tooth profile Precision-machined steel for strength and durability 3mm bore – fits standard 3mm motor shafts Includes set screw for secure mounting Perfect for:Upgrading or tuning your gear ratio for more top-end speed or specific track conditions. Includes: (1) 23T 32-pitch pinion gear (1) Set screw Whether you’re fine-tuning for speed or replacing a worn gear, this Traxxas pinion is built to perform.  

Read more less

Replacement 23-turn brushed motor for LaTrax® vehicles. Restore your LaTrax® vehicle’s performance with the Traxxas 7575R 370-Size Brushed Motor. This 23-turn motor is designed as a direct replacement and includes pre-installed bullet connectors for quick and easy installation. 🔧 Features: 23-turn brushed design 370-size motor Pre-wired with bullet connectors Delivers smooth and reliable power Genuine Traxxas® replacement part 💥 Compatibility: LaTrax® Teton® LaTrax® Rally LaTrax® Desert Prerunner Perfect for keeping your LaTrax® vehicle running strong with factory-spec performance!

Read more less

Traxxas 2300mAh 11.1V 3-Cell LiPo Battery w/ iD® Connector (Part #2824X) 🔋Reliable Power for High-Performance RC Systems This 3S 11.1V 2300mAh LiPo battery delivers solid performance and long-lasting power in a compact footprint. Perfect for vehicles that require a lightweight, high-output pack, this Traxxas battery is equipped with an iD® connector for seamless charging and foolproof setup with Traxxas iD-compatible chargers. ⚡ Features: 🔋 2300mAh Capacity – Balanced power-to-weight ratio for 3S vehicles 🔌 11.1V 3-Cell Configuration – Ideal for compact models needing high voltage 🔗 Traxxas iD® Connector – Ensures safe, automatic charger settings 🧊 Hard Case Design – Durable protection for everyday use 📏 Compact Dimensions – Great for tight battery compartments 📦 Specifications: Voltage: 11.1V Cell Count: 3S (3-cell LiPo) Capacity: 2300mAh Connector Type: Traxxas High-Current iD® Compatible with select Traxxas 1/10 and 1/16 scale vehicles.Always use a Traxxas iD®-compatible charger for optimal performance and safety. 🔌✅

Read more less

Traxxas 25-Tooth Pinion Gear (32-Pitch, 3mm Bore) – Part #10842⚙️ Dial In Your Speed. Smooth, Efficient Power Delivery. Upgrade or fine-tune your drivetrain with this Traxxas 25T pinion gear. Built for 3mm motor shafts and compatible with 32-pitch setups, it delivers solid acceleration and balanced top-end speed. Perfect for dialing in gearing to match your terrain or driving style. ✅ 25-tooth pinion✅ 32-pitch gear profile✅ Fits 3mm motor shafts✅ Hardened for long-lasting performance✅ Includes set screw for secure installation 📦 Includes: (1) 25T Pinion Gear (32P, 3mm bore) (1) Set Screw  

Read more less

⚡ Unleash the Full Potential of Your Traxxas Ride This Traxxas 2S 5000mAh LiPo battery with iD connector is built to deliver powerful punch and extended run time for your favorite Traxxas vehicles. Designed for maximum performance, this 25C battery gives you the acceleration, speed, and reliability you demand — all with the convenience of the Traxxas iD system for easy, foolproof charging. 🔋 Battery Specs: Type: LiPo Capacity: 5000mAh Voltage: 7.4V (2S) Discharge Rate: 25C Length: 137mm Width: 43mm Height: 24mm Weight: 9.9oz ✅ Features: Certified Traxxas iD-equipped for safe, easy charging Engineered for high performance and extended run time Fits Traxxas models perfectly — no modifications needed Delivers the power needed for peak speed and acceleration

Read more less

Get the performance and reliability you expect from Traxxas with the 5800mAh Power Cell 2S LiPo—a perfect balance of power, runtime, and safety for your Traxxas vehicle. 🔋 7.4V / 5800mAh / 25C Continuous Discharge🔌 Exclusive Traxxas iD Connector for simple, safe charging⚡ Max Burst Rate: 50C (290A)💪 Hard-wired 12AWG Maxx Cable for low resistance🏁 Designed for a perfect fit in Traxxas vehicles Dimensions: 137x25x43mmWeight: 308g ⚠️ Requires Traxxas iD charger only. Do not charge with any non-Traxxas charger. Boost your bash time with dependable power, rugged construction, and high-output delivery—Traxxas style.

Read more less

Unleash your model's full potential with the Traxxas Certified iD® LiPo Battery. Engineered to deliver maximum speed, runtime, and performance, this 2-cell 7.4V 1600mAh LiPo provides the power you need for high-energy RC action. Thanks to Traxxas’ exclusive iD® technology, charging is easier and safer than ever—just plug it in and let the charger do the work. Whether you’re racing or bashing, this battery keeps you in the game longer with consistent, reliable power. 🔋 Specs: Voltage: 7.4V (2S LiPo) Capacity: 1600mAh Connector: iD® High-current output for top-speed performance ✅ Features: Traxxas Certified quality and performance iD® technology ensures safe, hassle-free charging Provides excellent run time and punch for Traxxas models Designed for direct-fit, plug-and-play use Perfect for your TRX-4M, 1/18 LaTrax, and other compatible Traxxas vehicles.

Read more less

Power up your ride with serious runtime and punch! The Traxxas Power Cell 7600mAh 2S LiPo delivers high-capacity performance with rugged construction and easy plug-and-go charging through the Traxxas iD system. 🔋 7.4V / 7600mAh / 25C Continuous🔌 iD Connector for safe, simple charging🔥 Max Burst Rate: 50C (380A)⚡ Maxx Cable 12AWG wiring for low resistance🏁 Optimized fit for Traxxas models like Slash & Slash 4x4💡 Semi-rigid construction – no hard case needed Dimensions: 155x27x43mmWeight: 390g ⚠️ Note: Must be charged with a Traxxas iD charger only. The go-to battery for racers and bashers who want dependable power, long runtimes, and Traxxas factory fit and finish.  

Read more less

  Keep your TRX-4M running strong with this genuine Traxxas 2S LiPo battery! Compact, lightweight, and built for performance, it delivers consistent 7.4V power and 750mAh capacity with a 20C discharge rate—perfect for extended crawling adventures. ✅ Capacity: 750mAh✅ Voltage: 7.4V (2S)✅ Discharge Rate: 20C✅ Connector: Traxxas High-Current✅ Compatible With: TRX-4M Engineered by Traxxas for optimal runtime, reliability, and fit in your TRX-4M.

Read more less

Upgrade your transmission with this 30-tooth steel idler gear from Traxxas! Built for durability and performance, this gear is a perfect drop-in replacement for your VXL setup. ✅ Steel construction for maximum strength✅ Direct replacement for Traxxas transmission systems✅ Ideal for high-power VXL applications Part Number: 3696Compatibility: Traxxas vehicles equipped with VXL transmission systems  

Read more less

Traxxas 30° Caster Blocks (2) – PART 3632 Keep your suspension strong and steering responsive with this set of 30° caster blocks from Traxxas. Whether you're replacing worn parts or dialing in your setup, these precision-molded blocks are built tough to handle the rigors of high-speed off-road action. Features: Genuine Traxxas replacement part Designed for consistent steering geometry and durability 30° caster angle for balanced handling on a variety of surfaces Includes left and right side caster blocks Upgrade with confidence—perfect for restoring performance and getting back on track fast.

Read more less

Traxxas 32P Hardened Steel Pinion Gear (31T, 5mm Bore) – Part #5638⚙️ Stronger. Smoother. Built for Brushless. The Traxxas 31-Tooth Pinion Gear is built for performance and durability. Compatible with 32-pitch setups (0.8 metric pitch), this pinion is precision-cut from hardened steel and designed to fit motors with a 5mm shaft. Perfect for high-power RC builds demanding reliable gearing under pressure. ✅ 32-pitch / 0.8 mod compatibility✅ Hardened steel construction✅ 5mm bore for brushless motor shafts✅ Ideal for Slash 4X4, E-Revo, and other high-output platforms 📦 Includes: (1) 31T Hardened Steel Pinion Gear (1) Set screw  

Read more less

Traxxas 32P Hardened Steel Pinion Gear (34T, 5mm Bore) – Part #5639⚙️ Built to Handle Brutal Power. The Traxxas 34T Hardened Steel Pinion Gear is designed for serious torque and high-performance applications. Made from tough hardened steel, this 32-pitch gear is perfect for 1/8 and high-power 1/10 scale builds using motors with 5mm shafts. When you need dependable gearing that can take the heat—this is the upgrade. ✅ 32 pitch for high-power drivetrain setups✅ Hardened steel for extreme durability✅ 5mm bore fits most 1/8 brushless motors✅ Ideal for Slash 4X4, E-Revo, and more with 5mm shafts 📦 Includes: (1) 34T Hardened Steel Pinion Gear (1) Set screw

Read more less

Upgrade your drivetrain with Traxxas 32P Heavy Duty Pinion Gears, built tough from hardened steel for maximum durability and long-lasting performance. Available in a range of tooth counts from 12T to 22T, these 32-pitch pinions are perfect for high-power setups and intense off-road action. 🔩 Precision-machined hardened steel🔩 Perfect for brushless power systems🔩 Includes set screw for secure installation🔩 Available sizes: 12T through 22T🔩 Fits 3mm motor shafts Includes: (1) Steel Pinion Gear (Choose Tooth Count) (1) Set Screw Part Numbers: 3942X–3952X (select by tooth count) Built for strength. Made for speed. Trusted by Traxxas.

Read more less

Traxxas 34-Tooth Pinion Gear (1.0 Mod, 5mm Bore) – Part #6493⚙️ Max Out Top Speed. Built for Brutal Brushless Power. The Traxxas 34T Pinion Gear is precision machined for smooth performance and maximum efficiency. With a 1.0 metric pitch and 5mm bore, it’s made to fit high-powered brushless setups and withstand serious speed and torque. Perfect for high-speed runs and gear ratio tuning. ✅ 34-tooth gear for higher top-end speed✅ 1.0 Mod pitch for strength and durability✅ Fits 5mm motor shafts (ideal for brushless systems)✅ Machined steel for long-lasting wear resistance✅ Includes set screw 📦 Includes: (1) 34T Pinion Gear (1.0 Mod, 5mm bore) (1) Set Screw

Read more less

Traxxas 36mm Camber Link Turnbuckles (2) – Part 2443Fine-Tune Your Ride Height & Camber. This replacement camber link turnbuckle set includes two 36mm steel turnbuckles, designed specifically for the Traxxas Bandit. Easily adjust your rear camber angle to improve handling, cornering grip, and tire wear. ✅ Direct fit for Traxxas Bandit✅ Includes two 36mm steel turnbuckles✅ Precision threads for smooth adjustment✅ Strong steel construction – durable and race-tested✅ Adjustable with a turnbuckle wrench (sold separately) 📦 Includes: (2) 36mm Camber Link Turnbuckles Part #: 2443 💡 Pro Tip: Pair with upgraded rod ends or toe links for full tuning flexibility and improved suspension geometry.

Read more less

Traxxas 39mm Front Aluminum Camber Link – Part 3737 (Red or Blue)Tuned Precision. Aluminum Strength. Color to Match Your Build. The Traxxas 39mm front camber link turnbuckle is built from lightweight, anodized aluminum to provide extra strength and adjustability over stock plastic links. Whether you're upgrading for durability or adding style, this part delivers both. ✅ Available in Red or Blue anodized finish – match your rig’s style✅ Assembled with rod ends & hollow balls – ready to install✅ 39mm length – direct fit for Traxxas front suspension✅ Aluminum construction – stiffer, more durable than stock✅ Perfect for tuning front camber on high-performance setups✅ See Part 3741X for complete front/rear camber link set 📦 Includes: (1) 39mm Aluminum Camber Link Turnbuckle (Assembled) (2) Hollow Balls Part #: 3737 OR 3737A (choose Red or Blue) 💡 Pro Tip: Pair with aluminum rear camber links and toe links for a fully upgraded suspension geometry setup.  

Read more less

Keep your engine secure with this pack of four 3x10mm flat head hex screws from Traxxas. Designed specifically for engine mount applications, these screws offer a flush fit and solid hold. A must-have for maintenance or replacement in your Traxxas nitro models. ✅ Flat head for flush engine mount fit✅ 3x10mm hardened steel construction✅ Hex drive for easy installation✅ Genuine Traxxas part Includes: (4) 3x10mm Flat Head Engine Mount Hex Screws Part #: 4859 Perfect fit. Proven durability. Traxxas quality.    

Read more less

Traxxas 3x10mm Countersunk Machine Screws (6) – Part 3177Flush Fit. Clean Finish. Reliable Hold. The Traxxas 3x10mm countersunk machine screws are ideal when you need a flat, snag-free finish on your chassis or components. Perfect for securely mounting parts where a flush surface is critical. ✅ Includes 6 countersunk machine screws✅ Size: 3x10mm✅ Precision-threaded for secure fitment✅ Countersunk head – sits flush for clean installs✅ Great for chassis plates, skid plates, and more 📦 Includes: (6) 3x10mm Countersunk Machine Screws Part #: 3177 💡 Pro Tip: Use with countersunk washers or directly into flat surfaces where clearance matters.

Read more less

Traxxas 3x10mm Washer-Head Machine Screws (6) – Part 3193Secure Fit. Wider Hold. Versatile Length. The Traxxas 3x10mm washer-head machine screws are a go-to solution when you need a reliable fastener with added grip. The integrated washer-style head distributes pressure evenly — ideal for fastening into plastic or securing sensitive components. ✅ Includes 6 washer-head machine screws✅ Size: 3x10mm – versatile length for multiple RC applications✅ Integrated washer head – prevents pull-through and distributes load✅ Standard 3mm thread – fits most 1/10 scale Traxxas vehicles✅ Perfect for mounting electronics, suspension parts, and body panels 📦 Includes: (6) 3x10mm Washer-Head Machine Screws Part #: 3193 💡 Pro Tip: Ideal for use in plastic components where added surface area helps prevent damage.  

Read more less

Whether you're replacing worn-out hardware or stocking up your pit box, these genuine Traxxas 3x12mm button head machine screws are a must-have! Made with precision and durability in mind, they're perfect for securing various components on your Traxxas RC vehicles. ✅ Includes: 6 screws✅ Thread: Machine✅ Size: 3x12mm✅ Fits: Virtually any Traxxas vehicle – including Revo, Slash, Rustler, TRX-4, and more✅ Use for: Repairs, upgrades, or custom builds Built by Traxxas for Traxxas – engineered to fit right every time.    

Read more less

These 3x12mm countersunk machine screws from Traxxas are perfect for flush-mount applications where a clean, low-profile finish is needed. With Phillips drive heads for easy installation, they’re ideal for chassis and other flat-surface mounting tasks. Features:• 3x12mm steel machine screws• Countersunk heads for flush fit• Phillips drive for standard screwdriver compatibility• Great for chassis and hardware installations• Genuine Traxxas hardware for reliable performance Includes:• (6) 3x12mm Countersunk Machine Screws (Phillips Drive)Part Number: 3178 Tighten up your build with dependable, flush-fitting Traxxas screws.  

Read more less

  Keep your rig tight and secure with this set of 3x15mm button head machine screws from Traxxas. Built for durability and precision, these screws are perfect for maintenance, repairs, or custom builds. 🔩 Features: (6) High-quality 3x15mm button head machine screws Strong steel construction for long-lasting use Ideal for a wide range of Traxxas models, including the Revo Great for general RC repairs and upgrades Fits:Any vehicle that requires 3x15mm machine screws – universal compatibility across many Traxxas platforms. Reliable, tough, and ready to bolt down your next project.

Read more less

Traxxas 3x15mm Countersunk Machine Screws (6) – Part 3179Longer Reach. Flush Fit. Factory Reliable. The Traxxas 3x15mm countersunk machine screws are designed for secure fastening where a flush surface is needed — with a little more length for deeper mounting applications. ✅ Includes 6 precision-machined screws✅ Size: 3x15mm – great for thicker components or multiple layers✅ Countersunk head – installs flush for a smooth, clean finish✅ Standard 3mm thread – fits most Traxxas 1/10 scale builds✅ Perfect for chassis, skid plates, and hardware upgrades 📦 Includes: (6) 3x15mm Countersunk Machine Screws Part #: 3179 💡 Pro Tip: Ideal for use in areas where ground clearance matters or where screws pass through multiple materials.

Read more less

Traxxas 3x18mm Round-Head Machine Screws (6) – Part 2565Reliable Hardware. Precision Fit. The Traxxas 3x18mm round-head machine screws are perfect for replacing lost hardware or stocking your pit box. Built for a secure fit and clean finish, these screws are ideal for a wide range of RC assembly applications. ✅ Includes 6 round-head machine screws✅ Size: 3x18mm✅ Standard thread – compatible with most 1/10 Traxxas builds✅ Ideal for suspension, body, and chassis components✅ OEM quality for reliable performance 📦 Includes: (6) 3x18mm Round-Head Machine Screws Part #: 2565 💡 Pro Tip: Always keep a few spare hardware packs on hand for quick repairs and build adjustments.  

Read more less

Secure your components with confidence using Traxxas 3x20mm Countersunk Machine Screws. Featuring hex drive heads and a flush-fit countersunk design, these screws are perfect for applications where a smooth surface is essential. Features:• 3x20mm steel machine screws• Countersunk heads for flush mounting• Hex drive for reliable installation• Ideal for chassis, suspension, and flat-surface mounting• Genuine Traxxas hardware Includes:• (6) 3x20mm Countersunk Machine ScrewsPart Number: 2590 Perfect fit, strong hold—upgrade or replace with genuine Traxxas quality.      

Read more less

Traxxas 3x25mm Round-Head Machine Screws (6) – Part 2569Long Reach. Rock-Solid Hold. The Traxxas 3x25mm round-head machine screws are ideal for applications that require extra length without sacrificing strength or fit. Perfect for securing larger components or layering through thicker mounts. ✅ Includes 6 round-head machine screws✅ Size: 3x25mm – longer length for deeper mounting points✅ Durable steel construction – built to last under stress✅ Compatible with standard 3mm thread applications✅ Fits many Traxxas 1/10 scale models 📦 Includes: (6) 3x25mm Round-Head Machine Screws Part #: 2569 💡 Pro Tip: Match with washers or spacers to create rock-solid mounting solutions for electronics, bumpers, and more.    

Read more less

🔩 Strong, reliable fasteners for your Traxxas builds. This pack of Traxxas 3x30mm Button Head Machine Screws is perfect for repairs, upgrades, or custom builds. Made from durable steel and precision-threaded, they’re compatible with a wide range of Traxxas models, including the Revo. ✅ Durable steel construction✅ Precision M3 threading✅ Button head design for a smooth finish✅ Fits many Traxxas vehicles, including the Revo 📦 Includes:• (6) 3x30mm Button Head Machine Screws    

Read more less

Traxxas 3x8mm Button Head Machine Screws (6) – Part #2576🔩 Essential Hardware. Universal Fit. Keep your rig dialed with this 6-pack of Traxxas 3x8mm Button Head Screws. Designed for a clean, low-profile finish and built to handle tough conditions, these machine screws are perfect for a wide range of RC applications—including the Traxxas Revo and beyond. ✅ Button head design for a sleek and secure hold✅ Machine thread for metal or tapped plastic✅ Universal fit across many Traxxas vehicles✅ A great go-to screw for any pit box 📦 Includes: (6) 3x8mm Button Head Machine Screws 

Read more less

Traxxas 3x8mm Flat Head Screw (6) (VXL) – Part #3931🔩 Secure Fit. Clean Finish. The Traxxas 3x8mm Flat Head Screws are precision-machined for a flush, low-profile installation. Ideal for use in VXL and other Traxxas vehicles, these flat head screws ensure a snug, countersunk fit for components where a smooth finish is essential. ✅ Perfect for flush-mount applications✅ 3x8mm metric sizing✅ Flat head design for clean installation✅ Genuine Traxxas quality✅ Great for chassis, body panels, and more 📦 Includes: (6) 3x8mm Flat Head Screws 💡 Pro Tip: Always check your manual for proper screw placement and thread-lock recommendations for metal-on-metal applications.  

Read more less

Traxxas 3x8mm Washer-Head Machine Screws (6) – Part 3185Built-In Grip. Extra Hold. Compact Size. The Traxxas 3x8mm washer-head machine screws provide a wider contact surface for more secure fastening — without needing a separate washer. Ideal for mounting components where extra grip is needed in a tight space. ✅ Includes 6 washer-head machine screws✅ Size: 3x8mm – compact length for low-clearance installs✅ Washer-style head – spreads load, prevents pull-through✅ Standard 3mm thread – compatible with most Traxxas builds✅ Perfect for mounting electronics, linkages, and body parts 📦 Includes: (6) 3x8mm Washer-Head Machine Screws Part #: 3185 💡 Pro Tip: Great for plastic parts where larger heads reduce the risk of cracking or stripping.  

Read more less

Traxxas 400 High Torque Waterproof Brushless Servo – Red (High Voltage)Part #: 2255 Unleash Extreme Steering Power.The Traxxas 2255 High-Torque Brushless Servo delivers serious steering authority for high-demand 1/10 scale RC vehicles. With a whopping 400 oz-in of torque, lightning-fast response, and a waterproof design, this servo is built to take your vehicle’s performance to the next level—whether bashing, racing, or crawling. It features a full metal gear train, dual ball bearings, a high-efficiency brushless motor, and an anodized aluminum center case that sheds heat and adds strength. Whether you're piloting a Slash, Stampede, UDR, or upgrading your dual-servo E-Revo, the 2255 drops in for an immediate power boost. Built for the Toughest Terrain:Waterproof—not just water-resistant—this servo is ready for mud, snow, rain, or stream crossings without skipping a beat. TRX-4 Ready:For TRX-4 models, install with the Traxxas High-Voltage BEC Kit (#2262) and use the steel servo horn (#8247X) for optimal performance and protection. Highlights: 400 oz-in torque at 6.0V 0.15 sec/60° transit speed Waterproof sealed case Full metal gears and dual ball bearings Powerful brushless motor Aluminum center case dissipates heat Compatible with TSM™ and most 1/10 scale Traxxas vehicles Ideal single-servo upgrade for E-Revo Direct replacement for models using standard 2075 servos Specifications: Motor: Brushless Voltage Range: 6.0 – 7.4V DC Torque (6.0V): 400 oz-in Speed (6.0V): 0.15 sec/60° Weight: 64g Spline: 25T Gears: Metal Case: Plastic top/bottom, anodized aluminum center Controller: Digital Drop in the 2255 and take full control. Whether trail crawling or blasting around the track, this servo delivers the brute force and precision you need to lead the pack.

Read more less

Traxxas 47mm Front Camber Link Turnbuckles (2) – Part 2444Tighten Up Your Front-End Geometry. The Traxxas 47mm Front Camber Link Turnbuckle Set is a direct replacement for the front camber links on the Traxxas Bandit. These adjustable steel turnbuckles allow you to fine-tune your camber for better cornering, tire contact, and front-end responsiveness. ✅ Designed specifically for the Traxxas Bandit (front suspension)✅ Includes two 47mm steel turnbuckles✅ Smooth-threaded for precise alignment changes✅ Heavy-duty steel construction – reliable and durable✅ Adjustable with a turnbuckle wrench (sold separately) 📦 Includes: (2) 47mm Front Camber Link Turnbuckles Part #: 2444 💡 Pro Tip: Combine with the 36mm rear turnbuckles (Part 2443) for full camber control front and rear.

Read more less

Traxxas 48P Pinion Gear (28T) – Part #4728⚙️ Precision Gearing. Balanced Performance. Dial in your drivetrain with the Traxxas 28-tooth 48-pitch pinion gear. Perfect for fine-tuning your RC’s performance, this hardened steel gear delivers smooth acceleration and balanced top-end speed when paired with an 83T spur gear. Whether you're racing or bashing, proper gearing can mean the difference between finishing strong or falling short. ✅ 48-pitch, 28-tooth steel pinion✅ Ideal for increasing speed while maintaining efficiency✅ Compatible with standard 3mm motor shafts✅ Perfect match with 83T spur gear for optimized gearing✅ Set screw included for secure installation 📦 Includes: (1) 28T 48P Pinion Gear (1) Set Screw 💡 Pro Tip: Want more torque and acceleration? Go with a smaller pinion. Want more top speed? Gear up with a larger pinion—just like this one!  

Read more less