Team Associated RC10B7 Factory Team Steel Universal Driveshaft Set (69mm) – Smoother Power Delivery, Race-Ready Durability! 🚗 Boost your RC10B7 or RC10B7D’s drivetrain performance with the Team Associated Factory Team Steel Universal Driveshaft Set!These 69mm steel universals are specifically designed to reduce mechanical bind, ensuring smoother power transfer, better handling, and improved durability on the toughest tracks. ✨ Key Features: 🔩 Heavy-Duty Steel Construction – Built for maximum strength and long-lasting durability 🔧 Reduces Mechanical Bind – Ensures smoother drivetrain performance and improved cornering 🏁 Optimized for Racing – Helps deliver consistent handling in high-traction and rough conditions 🛡️ Official Factory Team Upgrade – Trusted quality from Team Associated’s championship pedigree 📦 Includes: ✔ (2) 69mm Steel Universal Driveshafts 📦 Compatibility: ✅ Team Associated RC10B7 ✅ Team Associated RC10B7D 📌 Note: 🔹 Direct replacement for stock parts.🔹 Recommended for racers seeking smoother, more efficient drivetrain performance. 🏁 Upgrade your RC10B7 or B7D with the Factory Team Universal Driveshaft Set and drive smoother, faster, and with more confidence! 🔥 Precision-engineered for serious racers by Team Associated! 🔥

Read more less

JConcepts F2 Lightweight Body for XRAY XB4 2024 – Includes Two 6.5" Wings💨 Championship-Proven Aero, Now in Lightweight Form Take your XRAY XB4 2024 to the next level with the JConcepts F2 Lightweight Body — designed for racers chasing every ounce of performance. Based on the IFMAR World Championship-winning design, the F2 body blends a forward cab bias, louvered roof, and signature Finnisher “V” styling for ultimate responsiveness and downforce. Now molded in a lightweight polycarbonate, this variant reduces overall mass for quicker transitions, faster acceleration, and a more planted feel on high-grip surfaces. Perfectly contoured to the XRAY XB4 2024 chassis, the F2’s tight layout offers plenty of clearance for your battery, servo, and motor configuration, while delivering a clean fit around the front bulkhead and top deck. ✨ Key Features: Lightweight polycarbonate construction for reduced mass Direct fit for XRAY XB4 2024 Forward cab bias with aggressive windshield angle Louvered roof, double-step side-pods, and rear kick-up for stable aero Accommodates modern 4WD electronics layouts Includes (2) 6.5" Carpet | Turf | Dirt Wings Window masks and JConcepts decal sheet included 📦 Includes: (1) Clear Lightweight F2 Body for XRAY XB4 2024 (2) 6.5" Wings (1) Window Mask Sheet (1) JConcepts Decal Sheet ⚠️ Note: Product ships clear and uncut. Painted body shown for illustration only. Compatibility:  • XRAY XB4 2024

Read more less

  🏁🔥 Classic NASCAR Style Meets Vintage Racing Performance! Bring authentic vintage racing style to your 1/12 scale VTA build with Pro-Line's officially licensed Goodyear Blue Streak Front Tires! Featuring realistic tread patterns, detailed Goodyear sidewall lettering, and classic racing proportions, these tires deliver the perfect finishing touch for your retro muscle car build. Pre-mounted on grey 8mm hex wheels, they're ready for quick, hassle-free installation! 🏁 About the Goodyear Blue Streak VTA Tires 🏎️ Authentic Vintage Racing Appearance Officially licensed by Goodyear, these Blue Streak tires capture the unmistakable look of classic American racing. The period-correct tread design, realistic proportions, and detailed sidewall lettering make them an excellent choice for vintage Camaro and Mustang builds. ⚙️ Designed for 1/12 VTA Racing Engineered specifically for 1/12 scale Vintage Trans-Am applications, these front tires provide the appropriate proportions and stance for realistic vintage race car builds. 🔧 Pre-Mounted & Ready to Install Forget the hassle of mounting and gluing tires! These Goodyear Blue Streak tires arrive pre-mounted on grey wheels with 8mm hex fittings for convenient installation. 🇺🇸 Made in the USA Proudly made in the USA, these officially licensed Pro-Line tires combine authentic scale detail with quality construction. ✨ Features ✔ Officially licensed Goodyear Blue Streak tires ✔ Authentic vintage NASCAR-inspired appearance ✔ Realistic street-style tread pattern ✔ Detailed Goodyear sidewall lettering ✔ Designed for 1/12 scale VTA racing ✔ Front tire configuration ✔ Pre-mounted on grey wheels ✔ 8mm wheel hex ✔ Proper vintage racing tire proportions ✔ Ideal for classic Camaro and Mustang VTA builds ✔ Made in the USA ✔ Two pre-mounted tires included 📦 Includes (2) Pro-Line Goodyear Blue Streak VTA Front Tires Pre-Mounted on Grey Wheels 🔧 Compatibility 1/12 Scale VTA Racing Applications Compatible vehicles using 8mm wheel hexes and appropriate front tire dimensions Ideal for vintage-style Camaro and Mustang builds 📊 Specifications Brand: Pro-Line Tire: Goodyear Blue Streak VTA Position: Front Scale: 1/12 Overall Diameter: 2.23" (57mm) Tire Width: 1.06" (27mm) Wheel Color: Grey Hex Size: 8mm Mounting: Pre-Mounted Quantity: 2 📝 Notes Includes two front tires pre-mounted on grey wheels. Designed for 1/12 VTA applications. Verify wheel hex size and tire clearance before ordering. Rear tires are sold separately.

Read more less

🏁🔥 Small Truck. Big Attitude. 50+ MPH Street-Bashing Madness! The ARRMA Infraction Grom 3S BLX packs serious brushless power into a compact 1/12 scale street bash truck! With 50+ MPH capability, a tough 4WD drivetrain, belted dBoots Hoons tires, and Spektrum Dynamic Stability Control, this little powerhouse is built for high-speed runs, pavement drifting, and all-out street-bashing fun. Even better, it comes Ready-to-Run with a Spektrum Smart 3S LiPo battery and USB-C charger included! Available in Yellow/Black or Red/Black. 🏁 About the Infraction Grom 3S BLX ⚡ 3S Brushless Power – 50+ MPH! A Spektrum Firma 4350kV brushless motor and SLT 2-in-1 40A brushless ESC/receiver deliver impressive acceleration and serious top-end speed. A motor heatsink and cooling fan help manage temperatures during high-performance driving. 🚀 PowerGuard – Two Ways to Unleash the Fun The PowerGuard system lets you choose how much performance you want: ✔ Adrenaline Mode: 30+ MPH for more manageable driving ✔ Chaos Mode: Insert the included PowerKey to unlock 50+ MPH performance! Start with controlled speed, then unleash the full potential when you're ready. 🎮 Spektrum Dynamic Stability Control (DSC) The included Spektrum SLT2 2.4GHz transmitter features adjustable Dynamic Stability Control to help manage slides, drifting, and high-speed handling. Choose from four settings: ✔ Off – Full manual steering control ✔ Low – Light steering assistance ✔ Medium – Increased stability assistance ✔ High – Maximum steering correction Adjust the assistance to suit your driving style, experience, and surface conditions. ⚙️ Tough 4WD Drivetrain The enclosed metal 4WD drivetrain features a sealed center differential with a metal spur gear, easy-access front and rear differentials, and aluminum wheel hexes. It's designed to handle the demands of powerful 3S brushless street driving. 🏎️ Built for Pavement Performance The low-slung composite chassis, independent double-wishbone suspension, and oil-filled shocks help keep the Infraction Grom planted during cornering and aggressive driving. Belted dBoots Hoons white compound tires provide pavement grip and stability for speed runs, drifting, and street-bashing action. 🔧 Clipless Body & SmartFit Battery System The quick-release clipless body makes accessing the chassis fast and easy. The SmartFit click-out battery system provides a secure, strap-free battery installation with an integrated connection, making battery changes a breeze. ✨ Features ✔ 50+ MPH capability in Chaos Mode ✔ 30+ MPH in Adrenaline Mode ✔ Spektrum Firma 4350kV brushless motor ✔ Spektrum SLT 2-in-1 40A brushless ESC/receiver ✔ PowerGuard speed-management system with PowerKey ✔ Four-mode Spektrum Dynamic Stability Control ✔ Spektrum SLT2 2.4GHz radio system ✔ Enclosed metal 4WD drivetrain ✔ Sealed center differential with metal spur gear ✔ Easy-access front and rear differentials ✔ Aluminum wheel hexes ✔ dBoots Hoons white compound belted tires ✔ Oil-filled shocks and independent suspension ✔ Low-slung composite chassis ✔ Quick-release clipless body ✔ SmartFit click-out battery system ✔ Motor heatsink and cooling fan ✔ Spektrum Smart 3S LiPo battery and charger included ✔ Available in Yellow/Black or Red/Black 📦 Includes (1) ARRMA Infraction Grom 3S BLX 1/12 4WD RTR Truck (1) Spektrum Firma 4350kV Brushless Motor (Installed) (1) Spektrum SLT 2-in-1 40A Brushless ESC/Receiver (Installed) (1) Spektrum SX114 Steering Servo (Installed) (1) Spektrum SLT2 2.4GHz Transmitter with DSC (1) Spektrum Smart 11.1V 1300mAh 3S 30C Hardcase LiPo Battery with IC2 Connector (1) Spektrum S22 Mini USB-C 3S Battery Charger (1) PowerKey (4) AA Transmitter Batteries (1) Product Manual 🔌 Needed to Complete (1) Compatible USB-C Power Adapter 📊 Specifications Scale: 1/12 Drive: 4WD Motor: Spektrum Firma 4350kV Brushless ESC: Spektrum SLT 2-in-1 40A Brushless Radio: Spektrum SLT2 2.4GHz with DSC Steering Servo: Spektrum SX114 Battery: 11.1V 1300mAh 3S 30C Smart LiPo Battery Connector: IC2 Top Speed: 30+ MPH Adrenaline / 50+ MPH Chaos Length: 15.04" (382mm) Width: 6.85" (174mm) Height: 4.65" (118mm) Wheelbase: 8.74" (222mm) Weight: 41.6 oz (1179g) Wheel Hex: 12mm Tires: dBoots Hoons Belted Assembly Level: Ready-to-Run 🎨 Available Colors Yellow/Black Red/Black 📝 Notes Select your preferred color when ordering. Battery, USB-C charger, and transmitter batteries are included. A compatible USB-C power adapter is required. 50+ MPH performance requires Chaos Mode with the included PowerKey. Actual speed and handling vary with conditions and setup. LiPo Safety: Always use a LiPo-compatible charger, follow manufacturer charging instructions, and never leave a charging battery unattended.  

Read more less

Big speed. Small scale. 50+ MPH of pure ARRMA street-bashing excitement! The ARRMA INFRACTION GROM 3S BLX 4X4 delivers serious brushless performance in a compact 1/12 scale package. Powered by a Spektrum 4350Kv brushless motor and 3S-compatible electronics, this all-road machine is built for high-speed runs, drifting, and parking lot action. With a tough 4X4 drivetrain, belted dBoots Hoons tires, Spektrum Dynamic Stability Control, and ARRMA's innovative PowerGuard technology, the INFRACTION GROM delivers big-truck excitement in a smaller, easier-to-transport package. ⚡ Features: 50+ MPH capable with appropriate battery and conditions Powerful Spektrum Firma 4350Kv brushless motor 3S LiPo compatible power system Spektrum SLT 2-in-1 40A brushless ESC and receiver Spektrum Dynamic Stability Control (DSC) for improved control during drifting and high-speed driving PowerGuard technology with included PowerKey to unlock full Chaos Mode Durable 4X4 drivetrain Sealed center differential Metal spur gear and durable drivetrain components Belted dBoots Hoons tires for high-speed street performance Oil-filled shocks and independent suspension Clipless, quick-release body mounting Durable composite chassis Spektrum SLT2 2.4GHz radio system Spektrum SX114 steering servo Factory assembled and ready for electronics setup Eye-catching Blue/Red factory-finished body 📦 Includes: (1) ARRMA INFRACTION GROM 3S BLX 4X4 RTR (1) Spektrum SLT2 2.4GHz Transmitter with DSC (1) Spektrum Firma 4350Kv Brushless Motor (Installed) (1) Spektrum SLT 2-in-1 40A Brushless ESC/Receiver (Installed) (1) Spektrum SX114 Steering Servo (Installed) (1) PowerKey (4) AA Transmitter Batteries Factory documentation and supplied accessories 📏 Specifications: Specification Details Manufacturer ARRMA Part Number ARA2315T1 Model INFRACTION GROM 3S BLX Scale 1/12 Color Blue/Red Drivetrain 4WD Motor Spektrum Firma 2838 4350Kv Brushless ESC Spektrum 40A 2-in-1 Radio Spektrum SLT2 2.4GHz with DSC Battery Compatibility 2S–3S LiPo Battery Connector IC2 Top Speed 50+ MPH Length 382mm (15.04") Width 174mm (6.85") Height 118mm (4.65") Wheelbase 222mm (8.74") Wheel Hex 12mm Tires Belted dBoots Hoons Shocks Oil-Filled Completion Level RTR – Battery & Charger Required 🔋 Needed to Complete: (1) Compatible 2S or 3S LiPo Battery (1) Compatible LiPo Battery Charger Battery and charger are NOT included with ARA2315T1. 🏁 PowerGuard & Chaos Mode The INFRACTION GROM 3S features ARRMA's PowerGuard technology, allowing drivers to manage the vehicle's performance. Insert the included PowerKey to unlock full Chaos Mode and unleash the truck's maximum performance potential. Combined with Spektrum DSC, this system makes the INFRACTION GROM exciting for experienced drivers while offering more manageable control for those developing their skills. 💡 Pro Tip: Start with a compatible 2S LiPo battery to get familiar with the INFRACTION GROM's handling. When you're ready for maximum performance, step up to a compatible 3S battery and use the included PowerKey to experience the full 50+ MPH capability.  

Read more less

🚙 Classic Jeep Style. Modern Trail Performance. The Axial SCX10 III Jeep CJ-7 V2 brings together iconic scale looks and proven crawling performance. Built on the rugged SCX10 III platform, this ready-to-run crawler delivers durability, smooth articulation, and advanced features like DIG control—all wrapped in a highly detailed, licensed CJ-7 body. 🏁 About the SCX10 III Jeep CJ-7 V2 🧱 Authentic Scale Detail This fully licensed Jeep CJ-7 body captures the look of the original with impressive detail, including molded accessories, a complete interior, and Laredo-inspired styling. Licensed Gen-Right bumpers, Raceline beadlock wheels, and Mickey Thompson tires complete the scale realism. 🎮 Upgraded Electronics & Control Axial updated the V2 with a steel-gear steering servo, separate ESC and receiver for easier upgrades, and a Spektrum SLT3 transmitter. The built-in DIG function allows you to lock the rear axle for tighter turns and improved control on technical terrain. 🏔️ Trail-Proven Performance The SCX10 III platform features a steel C-channel chassis, AR45 straight axles, and a multi-link suspension for excellent articulation and durability. Aluminum oil-filled shocks smooth out rough terrain, while the brushed power system delivers reliable torque for crawling. 🔧 Key Features ✔ Licensed Jeep CJ-7 body with detailed interior✔ Gen-Right bumpers and body armor✔ Raceline Daytona beadlock wheels✔ Mickey Thompson Baja Boss tires✔ SCX10 III steel C-channel chassis✔ AR45 straight axles✔ DIG function for advanced control✔ Multi-link solid axle suspension✔ Aluminum oil-filled coil-over shocks✔ Spektrum SLT3 2.4GHz radio system 📦 Includes (1) SCX10 III Jeep CJ-7 V2 RTR Rock Crawler (1) Slickrock 35T Brushed Motor (1) Spektrum S683 Metal Gear Steering Servo (1) Spektrum SX108 DIG Servo (1) Spektrum 40A Brushed ESC (IC3) (1) Spektrum SR515 5-Channel Receiver (1) Spektrum SLT3 Transmitter (4) AA Batteries Product Manual 🔋 Needed To Complete 2–3S LiPo Battery (EC3 or IC3 Connector) Compatible Battery Charger 📊 Specifications Scale: 1:10 Drive: 4WD Power: 2S–3S LiPo Length: 18.9in (480mm) Wheelbase: 12.28in (312mm) Width: 9.25in (235mm) Height: 9.76in (248mm) Weight: 110.4oz (3129.79g) Electronics: Motor: Brushed ESC: Brushed Connector: IC3 Servo: Spektrum S683 Metal Gear Wheels & Tires: Wheels: 1.9" Hex: 12mm Tires: Mickey Thompson Baja Boss 🎨 Available Colors Red Copper 🚙 Scale looks. Real capability. Built to crawl.

Read more less

🏁🔥 The Legendary No. 24 Is Back on the TrackThe Losi 1/12 NASCAR Jeff Gordon No. 24 DuPont Chevrolet Monte Carlo brings one of NASCAR’s most recognizable race cars to hobby-grade RC. Featuring an officially licensed Gen 4 Monte Carlo body with the iconic No. 24 DuPont livery, this fully assembled RTR combines AWD traction, 2S power, and 20+ MPH performance with everything needed to start racing included in the box.🏁 About the Jeff Gordon No. 24 Monte Carlo🏆 Iconic No. 24 DuPont StylingThe officially licensed Chevrolet Monte Carlo recreates Jeff Gordon’s legendary No. 24 DuPont race car, complete with authentic NASCAR styling and licensed Goodyear Eagle tires.⚙️ 2S AWD PerformanceA MEGA 380 28T brushed motor paired with a Spektrum 25A ESC powers the full-time AWD drivetrain to speeds of 20+ MPH, giving the car plenty of performance for driveway racing, parking-lot battles, and side-by-side competition.🏎️ Built to RaceIndependent suspension and oil-filled coil-over shocks help keep the chassis composed through corners, while the enclosed drivetrain and metal ring-and-pinion gears provide durability for real RC racing.🎮 Spektrum Radio SystemThe included Spektrum SLT2 2.4GHz transmitter provides easy, reliable control, while the waterproof Spektrum SX110 metal-geared steering servo handles steering duties.🔋 Battery & Smart Charger IncludedA Spektrum Smart 7.4V 1400mAh 2S 30C hardcase LiPo battery and S10 Smart G2 Mini USB-C charger are included, along with four AA transmitter batteries.✨ Features✔ Officially licensed Jeff Gordon No. 24 DuPont Chevrolet Monte Carlo✔ Officially licensed Gen 4 Monte Carlo body✔ 1/12 scale hobby-grade RC race car✔ Fully assembled Ready-to-Run✔ 20+ MPH capability✔ 2S LiPo powered✔ Full-time AWD drivetrain✔ MEGA 380 28T brushed motor✔ Spektrum waterproof SLT 2-in-1 25A ESC/receiver✔ Spektrum SX110 waterproof metal-geared steering servo✔ Spektrum SLT2 2.4GHz transmitter✔ Independent suspension✔ Oil-filled coil-over shocks✔ Enclosed drivetrain✔ Metal ring-and-pinion gears✔ Clipless body retention system✔ Licensed Goodyear Eagle tires✔ Battery and charger included📦 Includes (1) Losi 1/12 NASCAR Jeff Gordon No. 24 DuPont Chevrolet Monte Carlo (1) Spektrum Smart 7.4V 1400mAh 2S 30C Hardcase LiPo Battery (1) Spektrum S10 Smart G2 Mini 2S USB-C Charger (1) Spektrum SLT2 2.4GHz Transmitter (1) Spektrum Waterproof SLT 2-in-1 25A ESC/Receiver (1) MEGA 380 28T Brushed Motor (1) Spektrum SX110 Waterproof Metal-Geared Servo (4) AA Transmitter Batteries (1) Instruction Manual🔌 Needed to Complete USB or USB-C power adapter with QC 2.0/3.0 and 18W+ output📝 Notes Fully assembled RTR with the battery, charger, and transmitter batteries included. A compatible QC 2.0/3.0 18W+ USB power adapter is required to power the included charger. Always follow proper LiPo charging, handling, and storage procedures.

Read more less

🏁🏆 Bring the Legendary No. 48 Back to the TrackThe Losi 1/12 NASCAR Jimmie Johnson No. 48 Lowe’s Chevrolet Monte Carlo brings an iconic NASCAR throwback to hobby-grade RC racing. Fully assembled and ready to run, this officially licensed Monte Carlo combines detailed scale styling with AWD traction, 2S power, and speeds of 20+ MPH. Everything from the battery and charger to the transmitter batteries is included, making it ready for racing right out of the box.🏁 About the No. 48 Lowe’s Monte Carlo🏆 Official Jimmie Johnson No. 48 LiveryThe officially licensed Chevrolet Monte Carlo body recreates Jimmie Johnson’s unmistakable No. 48 Lowe’s NASCAR machine, complete with authentic scale details and a clean clipless body mounting system.⚙️ 2S AWD PerformanceA MEGA 380 28-turn brushed motor and Spektrum 25A ESC power the full-time AWD drivetrain to speeds of 20+ MPH. The enclosed drivetrain uses metal ring and pinion gears for durability during side-by-side racing.🏎️ Built for Real RC RacingIndependent suspension with oil-filled coil-over shocks helps keep the chassis composed through corners, while the composite chassis, front splitter, rear diffuser, and nerf bars help protect critical components during close racing.🎮 Spektrum Radio SystemThe included Spektrum SLT2 2.4GHz transmitter provides straightforward control and features Rookie Mode throttle limiting, allowing maximum throttle to be reduced to 50% or 75% for newer drivers.🔋 Battery & Smart Charger IncludedThe included Spektrum Smart 7.4V 1400mAh 2S 30C hardcase LiPo battery and S10 Smart G2 Mini USB-C charger provide the power system needed to get racing. Four AA batteries for the transmitter are included as well.✨ Features✔ Officially licensed Jimmie Johnson No. 48 Lowe’s Chevrolet Monte Carlo✔ 1/12 scale hobby-grade RC race car✔ Fully assembled Ready-to-Run✔ 20+ MPH capability✔ 2S LiPo power✔ All-wheel drive✔ MEGA 380 28T brushed motor✔ Spektrum waterproof SLT 2-in-1 25A ESC/receiver✔ Spektrum SX110 waterproof metal-geared steering servo✔ Spektrum SLT2 2.4GHz transmitter✔ Rookie Mode throttle limiting✔ Enclosed drivetrain with metal ring and pinion gears✔ Independent suspension✔ Oil-filled coil-over shocks✔ Clipless body retention system✔ Licensed Goodyear racing slicks✔ Battery and charger included📦 Includes (1) Losi 1/12 NASCAR Jimmie Johnson No. 48 Lowe’s Chevrolet Monte Carlo (1) Spektrum Smart 7.4V 1400mAh 2S 30C Hardcase LiPo Battery (1) Spektrum S10 Smart G2 Mini 2S USB-C Charger (1) Spektrum SLT2 2.4GHz Transmitter (4) AA Transmitter Batteries (1) Instruction Manual🔌 Needed to Complete USB or USB-C power adapter with QC 2.0/3.0 and 18W+ output📝 Notes Fully assembled and ready to run with battery, charger, and transmitter batteries included. A compatible 18W+ USB/USB-C QC 2.0/3.0 power adapter is required to power the included charger. Always follow proper LiPo charging, handling, and storage procedures.

Read more less

The Spektrum Metal Servo Top Case is a genuine replacement case component designed for compatible Spektrum S6240, S6240RX, and S6270 servos. It is intended to replace a damaged or worn upper servo housing while maintaining proper factory fitment. About the Metal Servo Top Case Genuine Spektrum Replacement Part Designed specifically for compatible Spektrum servos, this replacement metal top case allows you to service the servo without replacing the entire unit. Features ✔ Genuine Spektrum replacement part✔ Metal construction✔ Replacement upper servo case✔ Direct replacement for compatible Spektrum servos✔ Ideal for repairing a damaged or worn servo housing Includes (1) Spektrum Metal Servo Top Case Specifications Specification Details Brand Spektrum Part Number SPM9063 Product Type Servo Top Case Material Metal Position Upper / Top Case Compatibility Compatible with: Spektrum S6240 Servo Spektrum S6240RX Servo Spektrum S6270 Servo Notes Genuine Spektrum replacement part. This listing is for the metal top case only. Servo, gears, electronics, and other case components are not included.  

Read more less

The Losi Promoto-MX Dunlop MX53 Front Pre-Mounted Tire is an officially licensed replacement or optional front tire designed specifically for the Losi Promoto-MX 1/4 Brushless Dirt Bike. Featuring aggressive off-road tread and a scale-realistic 36-spoke wheel, it provides a quick and easy way to replace your front tire while maintaining the authentic motocross appearance of the Promoto-MX. About the Dunlop MX53 Front Tire Officially Licensed Dunlop Design Officially licensed by Dunlop to Losi, the MX53 recreates the look of a full-size motocross tire while providing aggressive tread designed for maximum traction in loose off-road conditions. Pre-Mounted & Ready to Install The tire comes factory mounted on a black scale-realistic 36-spoke wheel, eliminating the need for separate tire mounting and gluing. Features ✔ Designed specifically for the Losi Promoto-MX✔ Front tire and wheel assembly✔ Officially licensed Dunlop MX53 design✔ Aggressive off-road tread pattern✔ Designed for traction in loose conditions✔ Pre-mounted for quick installation✔ Scale-realistic 36-spoke wheel✔ Black wheel Includes (1) Losi Promoto-MX Dunlop MX53 Front Pre-Mounted Tire – Black Specifications Specification Details Brand Losi Part Number LOS46004 Tire Dunlop MX53 Position Front Wheel Color Black Wheel Style 36-Spoke Assembly Pre-Mounted Application 1/4 Scale Dirt Bike Compatibility Compatible with: Losi Promoto-MX Notes Officially licensed Dunlop product. Tire comes pre-mounted to the wheel for quick installation. This listing includes one front tire and wheel assembly. Vehicle is sold separately.  

Read more less

The Traxxas Stampede 4X4 VX3 combines powerful brushless performance, full-time 4WD traction, and factory-installed heavy-duty upgrades in a rugged 1/10 scale monster truck. Powered by the Velineon VX3 ESC and V3200 3200Kv brushless motor, the Stampede delivers hard-hitting acceleration and speeds of 50+ mph on 3S LiPo power. A reinforced chassis, Extreme Heavy-Duty suspension and driveline components, long-travel suspension, clipless body mounting, and Traxxas' self-righting system make the Stampede 4X4 VX3 ready for aggressive off-road bashing. Available Colors: Red, Orange, Green, or Black About the Stampede 4X4 VX3 VX3 Brushless Power The water-resistant Velineon VX3 ESC and V3200 3200Kv brushless motor provide efficient power delivery with support for both 2S and 3S LiPo batteries. The VX3 ESC features EZ-Set one-button programming, three selectable drive profiles, an aluminum heat sink with cooling fan, and Traxxas Link telemetry compatibility. TQi Sport Radio & TSM The included TQi Sport 2.4GHz radio system provides responsive control along with 30-model memory and fail-safe protection. Traxxas Stability Management (TSM) helps maintain control during hard acceleration, braking, and cornering on loose or slippery surfaces without limiting throttle response. Extreme Heavy-Duty Components The factory-installed Extreme Heavy-Duty Upgrade Kit reinforces key suspension and driveline components with upgraded caster blocks, steering blocks, axle carriers, Maxx-Duty driveshafts, oversized 6mm axles, and steel wheel hexes. Composite GTR oil-filled shocks feature threaded collars, large oil capacity, X-ring seals, and 3.5mm shafts for consistent damping across rough terrain. Full-Time 4WD A full-time shaft-driven 4WD system works with the torque-biasing center drive and oil-filled steel gear differentials to deliver dependable power to all four wheels. Aggressive Talon MXT tires mounted on 2.8" monster truck wheels provide strong forward bite and traction across dirt, grass, mud, and other loose surfaces. Self-Righting Technology If the Stampede lands upside down, Traxxas' patented self-righting system can rock the truck back onto its wheels with transmitter activation, helping keep your bash session moving. Features ✔ 1/10 scale RTR brushless monster truck✔ Full-time shaft-driven 4WD✔ 50+ mph capability on 3S LiPo power✔ Velineon VX3 water-resistant brushless ESC✔ Velineon V3200 3200Kv brushless motor✔ 2S and 3S LiPo compatible✔ TQi Sport 2.4GHz radio system✔ Traxxas Stability Management (TSM)✔ Patented self-righting technology✔ Factory-installed Extreme Heavy-Duty upgrades✔ Maxx-Duty driveshafts✔ Oversized 6mm axles✔ Steel wheel hexes✔ Torque-biasing center drive✔ Oil-filled steel gear differentials✔ Composite GTR oil-filled shocks✔ Long-travel suspension✔ Clipless body mounting system✔ Reinforced wheelie bar✔ High-approach bumpers✔ Talon MXT off-road tires✔ Water-resistant electronics✔ Choose Red, Orange, Green, or Black Includes (1) Traxxas Stampede 4X4 VX3 1/10 RTR Brushless Monster Truck (1) Pre-Installed Velineon VX3 Brushless ESC with Traxxas iD Connector (1) Pre-Installed Velineon V3200 3200Kv Brushless Motor (1) TQi Sport 2.4GHz 2-Channel Transmitter (1) Product Manual Needed to Complete (1) 2S or 3S LiPo Battery (7.4–11.1V) with Traxxas iD Connector (1) Compatible LiPo Battery Charger (4) AA Batteries for Transmitter Specifications Specification Details Brand Traxxas Part Number 67454-4 Model Stampede 4X4 VX3 Scale 1/10 Assembly Level Ready-to-Run Drive 4WD Power Source 2S–3S LiPo Motor Velineon V3200 Brushless Motor Kv 3200Kv ESC Velineon VX3 Brushless Battery Connector Traxxas iD Radio TQi Sport 2.4GHz Servo 2057 Water-Resistant Metal Gear Stability Control Traxxas Stability Management (TSM) Length 17.87" (454mm) Wheelbase 11.61" (295mm) Width 13.11" (333mm) Height 8.35" (212mm) Weight 95.68 oz (2712.48g) Wheel Size 2.8" Wheel Hex 12mm Tires Talon MXT Available Colors Red, Orange, Green, Black Notes Choose your preferred color before adding to cart: Red, Orange, Green, or Black. Battery and charger are sold separately. Requires four AA batteries for the transmitter. Maximum speed depends on battery, setup, surface conditions, and other factors. Water-resistant electronics are designed for wet conditions but should be properly maintained after exposure to water, mud, or debris.  

Read more less

The Hobbywing XR10 Pro G3X Stock Spec ESC and V10 G5 21.5T Torque Motor Combo delivers a complete competition power system designed specifically for 1/10 scale stock class racing. Combining the highly tunable XR10 Pro G3X Stock Spec ESC with Hobbywing's V10 G5 sensored brushless motor, this combo provides precise throttle control, efficient power delivery, advanced thermal management, and extensive setup adjustability. This version includes the 21.5T TORQUE motor, providing racers with a competition-focused option for classes requiring a 21.5-turn motor. About the XR10 Pro G3X & V10 G5 Combo Precision Stock Spec ESC The XR10 Pro G3X Stock Spec ESC is engineered for competitive stock racing with refined throttle and braking control. Multiple selectable profiles can be customized, renamed, and saved for different track conditions and racing classes. Adjustable PWM and brake frequencies allow racers to fine-tune throttle feel and braking force, while Hobbywing's Softening function provides additional control over power delivery and drivability. V10 G5 21.5T Torque Motor The included V10 G5 21.5T sensored brushless motor is built to competition standards with an emphasis on power, efficiency, and consistent performance. This TORQUE version provides strong, controllable power delivery while retaining the extensive tuning capabilities of the V10 G5 platform. Advanced Motor Cooling An exposed winding design and patented rotor cooling system help dissipate heat during demanding racing conditions. Lightweight construction and an optimized center of gravity help reduce unnecessary weight while contributing to improved vehicle balance and handling. Race-Level Tunability Adjustable Hall timing and sensing distance allow racers to fine-tune motor response to suit different track layouts and driving styles. The motor's modular construction allows easier servicing, while the ESC provides external programming and accessory ports along with built-in data logging for additional setup and performance analysis. Features ✔ Complete competition ESC and motor combo✔ Designed for 1/10 scale stock racing✔ XR10 Pro G3X Stock Spec ESC✔ V10 G5 21.5T TORQUE brushless motor✔ Sensored brushless operation✔ 160A continuous ESC current✔ 1200A burst ESC current✔ 2S LiPo ESC operation✔ Adjustable 5-7.4V BEC✔ Multiple customizable ESC profiles✔ Adjustable PWM frequency✔ Adjustable brake frequency✔ Hobbywing Softening function✔ Built-in data logging✔ Comprehensive ESC protection systems✔ Adjustable motor Hall timing✔ Adjustable sensing distance✔ Exposed winding motor design✔ Patented rotor cooling system✔ Lightweight motor construction✔ Optimized center of gravity✔ Modular motor design for easier maintenance✔ ESC cooling fan included✔ Programmable ESC Includes (1) Hobbywing XR10 Pro G3X Stock Spec Sensored Brushless ESC (1) Hobbywing V10 G5 21.5T Torque Sensored Brushless Motor (1) Sensor Cable (1) Set of Wiring Leads (1) ESC Cooling Fan (1) Instruction Manual Needed to Complete (1) Compatible 2S LiPo Battery Battery and motor connectors as required Compatible vehicle and radio electronics Soldering and installation equipment as required Specifications Specification Details ESC Model XR10 Pro G3X Stock Spec Suggested Application 1/10 Motor Type Sensored Brushless Input Voltage 2S LiPo (7.4V) Continuous Current 160A Burst Current 1200A BEC Voltage 5-7.4V BEC Continuous Current 5A Dimensions 35.0 x 33.6 x 30.3mm (1.38 x 1.32 x 1.19") Weight 101.5g (3.58oz) Motor Connector Bare Wire Battery Connector Bare Wire Programmable Yes Motor Model V10 G5 Version Torque Turns 21.5T Suggested Application 1/10 Motor Type Sensored Brushless Motor Voltage 1S-3S Adjustable Timing Yes Connector Solder Tab Dimensions 35.8 x 51.9mm (1.41 x 2.04") Shaft Diameter 3.175mm (1/8") Weight 138g (4.87oz) Notes This combo includes the 21.5T TORQUE version of the Hobbywing V10 G5 motor. The XR10 Pro G3X Stock Spec ESC is designed for 2S LiPo operation. The V10 G5 motor itself is rated for 1S-3S operation; when paired with the included ESC, follow the ESC's 2S input requirements. Battery and motor connections are supplied as bare wire/solder tabs and may require soldering during installation. Verify applicable motor, ESC, timing, and boost rules for your specific racing class or organization.    

Read more less

The Hobbywing XR10 Pro G3X Stock Spec ESC and V10 G5 17.5T Torque Motor Combo delivers a complete competition power system engineered for 1/10 scale stock class racing. Pairing the highly tunable XR10 Pro G3X Stock Spec ESC with Hobbywing's V10 G5 sensored brushless motor, this combo provides precise throttle control, efficient power delivery, advanced cooling, and extensive tuning capability. This version includes the 17.5T TORQUE motor, giving stock-class racers a competition-focused setup with strong, controllable power delivery. About the XR10 Pro G3X & V10 G5 Combo Precision Stock Spec ESC The XR10 Pro G3X Stock Spec ESC is designed specifically for competitive stock racing, providing refined throttle and braking control with consistent power output. Multiple customizable profiles allow racers to tailor performance for different track conditions and classes. Adjustable PWM and brake frequencies provide additional control over throttle feel and braking response, while Hobbywing's Softening function helps improve drivability and efficiency. V10 G5 17.5T Torque Motor The included V10 G5 17.5T sensored brushless motor is built to competition standards with an emphasis on increased output, efficiency, and thermal performance. This TORQUE version provides a power-delivery option suited to racers looking for strong response while maintaining the adjustability and efficiency of the V10 G5 platform. Advanced Motor Cooling An exposed winding design and patented rotor cooling system help manage heat during demanding race conditions for more consistent performance throughout a run. The lightweight motor construction and optimized center of gravity also help improve overall vehicle balance and handling. Race-Level Tunability Adjustable Hall timing and sensing distance allow racers to fine-tune motor response to suit their driving style and track layout. The motor's modular construction simplifies maintenance, while the ESC offers external programming and accessory ports, customizable profiles, and built-in data logging for additional setup flexibility. Features ✔ Complete competition ESC and motor combo✔ Designed for 1/10 scale stock racing✔ XR10 Pro G3X Stock Spec ESC✔ V10 G5 17.5T TORQUE brushless motor✔ Sensored brushless operation✔ 160A continuous ESC current✔ 1200A burst ESC current✔ 2S LiPo ESC operation✔ Adjustable 5-7.4V BEC✔ Multiple customizable ESC profiles✔ Adjustable PWM frequency✔ Adjustable brake frequency✔ Hobbywing Softening function✔ Built-in data logging✔ Comprehensive ESC protection systems✔ Adjustable motor Hall timing✔ Adjustable sensing distance✔ Advanced motor cooling system✔ Exposed winding design✔ Patented rotor cooling system✔ Lightweight motor construction✔ Optimized center of gravity✔ Modular motor design for easier maintenance✔ ESC cooling fan included✔ Programmable ESC Includes (1) Hobbywing XR10 Pro G3X Stock Spec Sensored Brushless ESC (1) Hobbywing V10 G5 17.5T Torque Sensored Brushless Motor (1) Sensor Cable (1) Set of Wiring Leads (1) ESC Cooling Fan (1) Instruction Manual Needed to Complete (1) Compatible 2S LiPo Battery Battery and motor connectors as required Compatible vehicle and radio electronics Soldering and installation equipment as required Specifications Specification Details ESC Model XR10 Pro G3X Stock Spec Suggested Application 1/10 Motor Type Sensored Brushless Input Voltage 2S LiPo (7.4V) Continuous Current 160A Burst Current 1200A BEC Voltage 5-7.4V BEC Continuous Current 5A Dimensions 35.0 x 33.6 x 30.3mm (1.38 x 1.32 x 1.19") Weight 101.5g (3.58oz) Motor Connector Bare Wire Battery Connector Bare Wire Programmable Yes Motor Model V10 G5 Version Torque Turns 17.5T Suggested Application 1/10 Motor Type Sensored Brushless Motor Voltage 1S-3S Adjustable Timing Yes Connector Solder Tabs Dimensions 35.8 x 51.9mm (1.41 x 2.04") Shaft Diameter 3.175mm (1/8") Weight 138g (4.87oz) Notes This combo includes the 17.5T TORQUE version of the Hobbywing V10 G5 motor. The XR10 Pro G3X Stock Spec ESC is designed for 2S LiPo operation. The V10 G5 motor itself is rated for 1S-3S operation; when paired with this ESC, follow the ESC's 2S input requirements. Battery and motor connections are supplied as bare wire/solder tabs and may require soldering during installation. Verify applicable motor, ESC, timing, and boost rules for your specific racing class or organization.  

Read more less

The JConcepts P2 Buggy Body brings the proven P2 aerodynamic design to the Team Associated RC10B84 1/10 4WD buggy. Developed through years of competition experience, the P2 combines a forward-cab layout, recessed windshield, signature center fin, and carefully shaped side pods to deliver a clean, race-focused profile. The body is supplied clear and unpainted and includes two 6.5" wings, window masks, and a decal sheet for completing your race body. About the P2 Buggy Body Aerodynamic Performance The P2 features a forward-positioned cab and recessed windshield with vertical rails that transition into the cockpit and deep rear body section. A signature center fin extends from the cab toward the rear shocks, while double winglets positioned ahead of the rear tires add to the body's distinctive aerodynamic profile. Purpose-Built RC10B84 Fitment Deeply chamfered side pods provide a sharp, streamlined appearance, while the body is shaped to fit closely around the Team Associated spur gear guard. Two 6.5" wings are included for carpet, turf, and dirt racing applications. Ready for Your Custom Paint The clear polycarbonate body includes protective overspray film, window masks, trim lines, and a decal sheet to simplify finishing and customization. Features ✔ Designed for the Team Associated RC10B84✔ Competition-inspired P2 aerodynamic design✔ Forward cab configuration✔ Recessed windshield with vertical rails✔ Signature center fin✔ Double winglets ahead of the rear tires✔ Deeply chamfered side pods✔ Snug fit around the spur gear guard✔ Includes two 6.5" wings✔ Suitable for carpet, turf, and dirt applications✔ Clear protective overspray film✔ Window masks and decal sheet included✔ Clear and ready for custom paint Includes (1) JConcepts RC10B84 P2 1/10 Buggy Body – Clear (2) 6.5" Wings (1) Decal Sheet (1) Window Masking Sheet Specifications Specification Details Brand JConcepts Part Number JCO0716 Body P2 Scale 1/10 Vehicle Type 4WD Buggy Material Polycarbonate Finish Clear / Unpainted Wing Length 6.5" Application Carpet, Turf & Dirt Compatibility Compatible with: Team Associated RC10B84 Notes Body is supplied clear and unpainted. Painted body shown in manufacturer photos is for illustration only. Vehicle, wheels, tires, electronics, and other accessories are sold separately. Polycarbonate-compatible paint is required for finishing.

Read more less

The Traxxas Slash 4x4 VX3 delivers the speed, durability, and handling that have made the Slash platform a favorite among short course enthusiasts. Powered by the Velineon VX3 brushless system, it reaches 35+ mph on 2S and 50+ mph on 3S without requiring gearing changes. A low-CG chassis, full-time 4WD, heavy-duty driveline, composite GTR shocks, and Traxxas Stability Management provide the control and durability needed for high-speed off-road action. Choose from Green, Orange, Black, or Red. About the Slash 4x4 VX3 2S & 3S Brushless Performance The Velineon VX3 water-resistant ESC and Velineon V3200 3200Kv brushless motor deliver strong acceleration and efficient power with support for both 2S and 3S LiPo batteries. Run 2S for 35+ mph performance or step up to 3S for 50+ mph, with no gearing changes required. Low-CG Chassis & Heavy-Duty Suspension The reinforced low-CG chassis positions the battery and electronics lower in the truck for improved cornering, stability, and high-speed handling. Composite GTR shocks feature large oil capacity, threaded collars, powder-coated springs, and X-ring seals for smooth, consistent damping. Heavy-duty suspension arms, caster blocks, steering blocks, and axle carriers add durability for demanding off-road driving. Heavy-Duty 4WD Drivetrain A full-time shaft-driven 4WD system transfers brushless power through a torque-biasing center drive, Maxx-Duty driveshafts, oversized 6mm axles, steel wheel hexes, and oil-filled steel-gear differentials. The result is dependable traction and a drivetrain built to handle the performance of the VX3 brushless system. TQi Sport Radio & TSM The included TQi Sport 2.4GHz radio system provides precise control along with Traxxas Stability Management (TSM), helping maintain stability and acceleration on loose or low-traction surfaces. A water-resistant 2057 metal-gear steering servo provides durable steering performance for aggressive driving. Clipless Short Course Body The aerodynamic short course body is designed to increase downforce and high-speed stability while Traxxas' clipless mounting system eliminates traditional body clips. Quick body removal makes battery changes and maintenance fast and convenient. Features ✔ 1/10 scale brushless short course truck✔ Full-time shaft-driven 4WD✔ 35+ mph capability on 2S LiPo✔ 50+ mph capability on 3S LiPo✔ No gearing changes required between 2S and 3S✔ Velineon VX3 water-resistant brushless ESC✔ Velineon V3200 3200Kv brushless motor✔ Aluminum ESC heat sink with cooling fan✔ Traxxas EZ-Set one-button programming✔ Three selectable ESC drive profiles✔ Traxxas Link telemetry compatibility✔ TQi Sport 2.4GHz radio system✔ Traxxas Stability Management (TSM)✔ Water-resistant 2057 metal-gear steering servo✔ Reinforced low-CG chassis✔ Heavy-duty suspension components✔ Composite GTR oil-filled shocks✔ Torque-biasing center drive✔ Maxx-Duty driveshafts✔ Oversized 6mm axles✔ Steel wheel hexes✔ Oil-filled steel-gear differentials✔ Scale Kumho tires with foam inserts✔ Aerodynamic clipless short course body✔ Clipless battery compartment✔ Fully assembled Ready-to-Run Includes (1) Traxxas Slash 4x4 VX3 1/10 RTR 4WD Brushless Short Course Truck (1) Pre-Installed Velineon VX3 Brushless ESC with Traxxas iD Connector (1) Pre-Installed Velineon V3200 3200Kv Brushless Motor (1) TQi Sport 2.4GHz 2-Channel Transmitter (1) Product Manual Available Colors Choose from: Green Orange Black Red Needed to Complete (1) 2S or 3S LiPo Battery (7.4-11.1V) with Traxxas iD Connector (1) Compatible LiPo Battery Charger (4) AA Batteries for Transmitter Specifications Specification Details Brand Traxxas Part Number 68454-4 Model Slash 4x4 VX3 Scale 1/10 Vehicle Type Short Course Truck Drive 4WD Power Source 2S-3S LiPo Speed 35+ mph 2S / 50+ mph 3S Length 568mm (22.36") Wheelbase 324mm (12.76") Width 296mm (11.65") Height 193mm (7.6") Weight 2639.91g (93.12oz) Motor Velineon V3200 3200Kv Brushless ESC Velineon VX3 Brushless Battery Connector Traxxas iD Servo 2057 Water-Resistant Metal Gear Radio System TQi Sport 2.4GHz Stability Control Traxxas Stability Management (TSM) Front Wheels 2.0/3.0" Rear Wheels 2.0/3.0" Wheel Hex 12mm Front Tires Kumho Rear Tires Kumho Assembly Level Ready-to-Run Notes Choose your preferred color before adding to cart. Available in Green, Orange, Black, or Red. Battery, charger, and transmitter AA batteries are not included. Compatible with 2S and 3S LiPo power. Speed capability varies depending on battery, conditions, and setup. Ready-to-Run models include the vehicle electronics and transmitter required for operation.  

Read more less

The Traxxas Rustler VX3 combines classic 2WD stadium truck handling with serious brushless power and Extreme Heavy Duty durability. Capable of 40+ mph on 2S or 60+ mph on 3S with no gearing changes required, the Rustler VX3 is built for high-speed bashing with a low-CG chassis, reinforced drivetrain, waterproof electronics, and Traxxas Stability Management. Choose from Red, Orange, Yellow, Black, or 40th Anniversary editions. About the Rustler VX3 Extreme Heavy Duty Durability The Rustler VX3 features reinforced Extreme Heavy Duty components throughout the suspension and drivetrain. Heavy-duty suspension arms, caster blocks, steering blocks, axle carriers, and driveshafts provide increased strength for aggressive driving. The durable Magnum 272 metal-gear transmission and reinforced low-CG chassis complete a drivetrain designed to handle the increased performance of brushless power. 2S & 3S Brushless Performance The VX3 electronic speed control and Velineon V3200 brushless motor deliver strong acceleration and high-speed performance with support for both 2S and 3S LiPo power. The Rustler VX3 is capable of 40+ mph on 2S and 60+ mph on 3S, with no gearing changes required when switching between the two. Clipless Body Convenience Traxxas' clipless body mounting system eliminates traditional body clips and posts for a clean appearance and quick access to the chassis. The body locks securely into place while driving and releases quickly for battery changes and maintenance. Stable, Responsive Handling The wide, low-profile chassis helps keep the Rustler planted at speed, while its oil-filled shocks and adjustable suspension provide controlled damping across rough terrain. The included TQi Sport 2.4GHz radio system with Traxxas Stability Management (TSM) helps provide additional control and stability on loose or low-traction surfaces. Features ✔ 1/10 scale 2WD brushless stadium truck✔ 40+ mph capability on 2S LiPo✔ 60+ mph capability on 3S LiPo✔ No gearing change required between 2S and 3S✔ Traxxas VX3 electronic speed control✔ Velineon V3200 brushless motor✔ Waterproof electronics✔ Extreme Heavy Duty suspension and drivetrain components✔ Magnum 272 metal-gear transmission✔ Heavy-duty driveshafts✔ Wide, low-profile chassis design✔ Durable fiber-composite monocoque chassis✔ Clipless body mounting system✔ Oil-filled shocks with X-ring technology✔ Threaded shock adjustment✔ TQi Sport 2.4GHz 2-channel radio system✔ Traxxas Stability Management (TSM)✔ 2.8" RXT 6-spoke wheels✔ 12mm wheel hexes✔ Traxxas iD battery connector✔ Fully assembled Ready-to-Run Includes (1) Traxxas Rustler VX3 1/10 RTR 2WD Brushless Stadium Truck (1) Traxxas TQi Sport 2.4GHz Transmitter Available Colors Choose from: Red Orange Yellow Black 40th Anniversary Needed to Complete (1) Traxxas 2S or 3S LiPo Battery (1) Traxxas EZ-Peak Charger (4) AA Batteries for Transmitter Specifications Specification Details Brand Traxxas Part Number 37454 Series Model Rustler VX3 Scale 1/10 Vehicle Type Stadium Truck Drive 2WD Power Source 2S-3S (7.4-11.1V) LiPo Speed 40+ mph 2S / 60+ mph 3S Length 470mm (18.5") Wheelbase 289mm (11.4") Width 311mm (12.2") Height 214mm (8.4") Weight 1961.7g (69.2oz) Motor Velineon V3200 Brushless ESC VX3 Brushless Battery Connector Traxxas iD Servo Standard Radio System TQi Sport 2.4GHz 2-Channel Stability Control Traxxas Stability Management (TSM) Front Wheels 2.8" RXT 6-Spoke Rear Wheels 2.8" RXT 6-Spoke Wheel Hex 12mm Front Tires Street Rear Tires Sledgehammer ST Assembly Level Ready-to-Run Notes Choose your preferred color before adding to cart. Available in Red, Orange, Yellow, Black, and 40th Anniversary editions. Battery, charger, and transmitter AA batteries are not included. Compatible with Traxxas 2S and 3S LiPo batteries. Speed capability varies depending on battery, driving conditions, and setup. Ready-to-Run models include the vehicle electronics and transmitter required for operation.    

Read more less

🏜️🔥 60+ MPH Large-Scale Desert Truck Performance The ARRMA Mojave 6S BLX V3 is a 1/7 scale 4WD brushless desert truck built for high-speed runs, hard bashing, and serious off-road action. Powered by a Spektrum Firma 6S brushless system and supported by a rugged aluminum-reinforced chassis, the Mojave combines explosive performance with the stability needed to put all that power to the ground. The refreshed V3 adds updated electronics, aggressive desert styling, and a convenient clipless body system, making battery changes and maintenance quicker while preserving the Mojave's realistic scale appearance. Available in Blue or Tan 🏁 About the Mojave 6S BLX V3 ⚡ 6S Brushless Power – 60+ MPH A Spektrum Firma 4074 2050Kv brushless motor and Firma 150A Smart V2 waterproof ESC provide the Mojave with serious acceleration and 60+ MPH capability under appropriate conditions. The ESC supports 4S through 6S LiPo power, letting drivers tailor the truck's performance to their experience and driving environment. 🏜️ Long-Wheelbase Desert Truck Handling The large 1/7 scale platform and 420mm wheelbase provide a planted, stable feel at speed. Independent suspension and oil-filled adjustable shocks help soak up rough terrain, jumps, and hard landings while maintaining control across dirt, sand, gravel, grass, and other surfaces. 💪 Built for Serious Bashing The Mojave is reinforced with aluminum front and rear shock towers, a center chassis brace, durable wheel hubs, nerf bars, and heavy-duty front and rear protection. Underbody protection helps keep dirt and debris away from critical components during aggressive off-road driving. 🎨 Detailed Clipless Desert Truck Body The V3 body combines matte and gloss finishes with a detailed cockpit and scale-inspired graphics for an aggressive full-size desert racer look. A hidden clipless mounting system eliminates traditional body clips while allowing fast access to the chassis. 📡 Spektrum Electronics The factory-installed electronics package includes a Spektrum S665 waterproof digital steering servo, SR315 receiver, and SLT3 2.4GHz 3-channel transmitter for a complete RTR control system. 🔧 Features Massive 1/7 scale desert truck platform 60+ MPH capable with appropriate battery and gearing Powerful 6S brushless power system Spektrum Firma 4074 2050Kv brushless motor Spektrum Firma 150A Smart V2 waterproof ESC 4S-6S LiPo compatible Full-time 4WD drivetrain Long-wheelbase chassis for high-speed stability Aluminum front and rear shock towers Center chassis brace Oil-filled adjustable shocks Rugged front and rear protection Clipless body mounting system Detailed desert truck body and cockpit dBoots Fortress multi-terrain tires 17mm wheel hexes Spektrum S665 waterproof digital steering servo Spektrum SR315 receiver Spektrum SLT3 2.4GHz transmitter Fully assembled and Ready-to-Run 📦 Includes (1) ARRMA Mojave 6S BLX V3 1/7 4WD Brushless RTR Desert Truck (1) Spektrum Firma 150A Smart V2 Waterproof ESC (1) Spektrum Firma 4074 2050Kv Brushless Motor (1) Spektrum S665 Waterproof Digital Steering Servo (1) Spektrum SR315 3-Channel Dual Protocol Receiver (1) Spektrum SLT3 2.4GHz 3-Channel Transmitter (1) Pinion Gear (4) AA Transmitter Batteries (1) Instruction Manual 🔋 Needed to Complete Choose one compatible battery configuration: (1) 4S Hardcase LiPo Battery with IC5 connector OR (1) 6S Hardcase LiPo Battery with IC5 connector OR (2) 2S Hardcase LiPo Batteries with IC5 connectors OR (2) 3S Hardcase LiPo Batteries with IC5 connectors Compatible LiPo battery charger LiPo-safe charging/storage bag 📊 Specifications Specification Details Brand ARRMA Model Mojave 6S BLX V3 Scale 1/7 Vehicle Type Desert Truck Drive 4WD Power 4S-6S LiPo Motor Spektrum Firma 4074 2050Kv Brushless ESC Spektrum Firma 150A Smart V2 Servo Spektrum S665 Waterproof Digital Receiver Spektrum SR315 Radio Spektrum SLT3 2.4GHz Connector IC5 Length 28.14in (715mm) Width 13.98in (355mm) Height 10.63in (270mm) Wheelbase 16.54in (420mm) Weight 14.31lbs (6.49kg) Wheel Hex 17mm Tires dBoots Fortress Assembly Level RTR* Colors Blue or Tan *RTR models come assembled with electronics and transmitter. A compatible LiPo battery and charger are required and sold separately.    

Read more less

🚤⚡ Compact Brushless Power for Small-Scale RC Boats The Spektrum Firma 30A Brushless Marine ESC is a compact electronic speed control designed for 2S and 3S LiPo-powered RC marine applications. Built to provide reliable control of compatible brushless motors, this 30-amp ESC is an ideal replacement for compatible Pro Boat models or for other appropriately matched small-scale marine setups. Its compact size makes it especially well suited for boats where internal space and weight are at a premium. 🚤 About the Firma 30A Marine ESC ⚡ 2S-3S Brushless Power Designed to operate on 2S or 3S LiPo power, the Firma 30A ESC provides smooth electronic control for compatible brushless marine motors. 🔧 Compact Marine Design The small footprint makes installation easier in compact RC boat hulls while providing the power handling required for compatible small-scale performance boats. 🏁 Genuine Spektrum Replacement A great option for replacing the factory ESC in compatible models such as the Pro Boat Recoil 2 18", helping restore the boat's original electronic setup and performance. 🔧 Features Spektrum Firma brushless marine ESC 30A current rating Designed for RC boat applications Compatible with 2S and 3S LiPo power Compact design for small-scale marine applications Designed for use with compatible brushless motors Great replacement for damaged or worn factory electronics Genuine Spektrum component 📦 Includes (1) Spektrum Firma 30A Brushless Marine ESC 📊 Specifications Specification Details Brand Spektrum RC Part Number SPMXME1030 Product Line Firma Product Type Brushless Marine ESC Current Rating 30A Battery Compatibility 2S-3S LiPo Motor Type Brushless Application RC Marine 🚤 Compatibility Pro Boat Recoil 2 18"  

Read more less

✈️📡 Advanced 10-Channel Control, Stabilization & Full-Range Telemetry The Spektrum AR10360T+ 10-Channel DSMX Aircraft Telemetry Receiver combines advanced stabilization, telemetry, and Smart technology in a compact package designed for a wide range of airplanes and sailplanes. Featuring built-in AS3X+ and SAFE technologies, the AR10360T+ provides pilots with enhanced stability and control while maintaining the responsive feel of their aircraft. With 10 channels, full-range DSMX operation, integrated telemetry, and Smart system compatibility, this receiver is a powerful option for everything from sport aircraft to larger, more complex models. ✈️ About the AR10360T+ 🎯 AS3X+ Stabilization Built-in AS3X+ technology helps counter the effects of turbulence, wind, and other outside forces to provide a smoother and more precise flight experience. 🛡️ SAFE Technology Integrated SAFE technology provides additional flight-envelope assistance when properly configured, making it possible to add an extra level of confidence and control to compatible aircraft setups. 📡 Full-Range Telemetry The AR10360T+ provides full-range telemetry capability and features an integrated barometer for altitude and variometer data. The included flight pack voltage sensor adds convenient battery voltage monitoring. ⚙️ Smart System Integration Support for Spektrum Smart technology and Smart Transmitter Model File Download helps streamline compatible aircraft setup. A Micro USB connection provides access for firmware updates and model setup sharing. 🔧 Features 10-channel aircraft receiver Full-range Spektrum DSMX 2.4GHz operation Built-in AS3X+ stabilization Integrated SAFE technology Full-range telemetry capability Integrated barometer for altitude and vario data Spektrum Smart system compatibility Smart Transmitter Model File Download support Advanced failsafe capabilities Micro USB connection for firmware updates Compact and lightweight design Suitable for airplanes and sailplanes Push-button binding 📦 Includes (1) Spektrum AR10360T+ 10-Channel DSMX Telemetry Receiver (1) Spektrum Flight Pack Voltage Sensor (1) Product Manual 📊 Specifications Specification Details Brand Spektrum RC Part Number SPM-1034 Model AR10360T+ Application Airplane / Sailplane Channels 10 Modulation DSMX Frequency Band 2.4GHz Technology AS3X+ / SAFE Telemetry Full Range Bind Method Button Input Voltage 3.5–9V Resolution 2048 Length 2.16in (55mm) Width 1.18in (30mm) Height 0.59in (15mm) Weight 0.63oz (18g)  

Read more less

🔧🏁 Premium Titanium Hex Drivers for RC Building & Maintenance The BOOF RC Titanium Hex Driver Set is a premium four-piece tool set designed for RC building, maintenance, and trackside repairs. Featuring titanium hex driver shafts with a gold finish and lightweight hollow honeycomb aluminum handles, these drivers combine durability, precision, and a comfortable feel for everyday use at the bench or track. With 1.5mm, 2.0mm, 2.5mm, and 3.0mm sizes included, the set covers many of the most commonly used metric hex fasteners found on RC cars, trucks, buggies, crawlers, and other hobby-grade vehicles. 🔧 About the Titanium Hex Driver Set 💪 Titanium Driver Shafts Each driver features a titanium shaft for a strong, lightweight tool with a premium gold finish. Precision hex tips provide a secure fit when installing and removing compatible metric hex hardware. 🏁 Hollow Honeycomb Aluminum Handles The machined aluminum handles feature a hollow honeycomb design that reduces unnecessary weight while creating a comfortable, balanced tool. Knurled grip sections provide added traction and control for precise adjustments and extended wrenching sessions. 🎯 Color-Coded for Quick Identification Each driver features a color-coded collar, making it easy to quickly identify the size you need without sorting through your tools. 🔧 Features Premium four-piece metric hex driver set Titanium hex driver shafts Gold finish Lightweight machined aluminum handles Hollow honeycomb handle design Knurled grip surfaces for added control Color-coded collars for quick size identification Precision hex tips Includes four commonly used RC metric sizes Great for building, maintenance, setup, and repairs Ideal for the workbench or trackside pit bag Suitable for RC cars, trucks, buggies, crawlers, and more 📦 Includes (1) 1.5mm Titanium Hex Driver (1) 2.0mm Titanium Hex Driver (1) 2.5mm Titanium Hex Driver (1) 3.0mm Titanium Hex Driver 📊 Specifications Specification Details Brand BOOF RC Product Type Titanium Hex Driver Set Driver Sizes 1.5mm / 2.0mm / 2.5mm / 3.0mm Shaft Material Titanium Shaft Finish Gold Handle Material Aluminum Handle Design Hollow Honeycomb Knurled Grip Style Knurled Quantity 4 Drivers Application RC Building, Maintenance & Repair         

Read more less

🔌⚡ Versatile 4mm Connectors for RC Charging & Electronics The BOOF RC 4mm Banana Plugs are a handy addition to any RC workbench, pit bag, or charging setup. Designed for applications using standard 4mm banana-style connections, these plugs are ideal for building custom charge leads, replacing worn connectors, and other compatible RC wiring projects. The set includes one red and one black plug for easy identification of positive and negative connections. 🔧 Features Standard 4mm banana-style plugs Great for custom RC charging leads and wiring Red and black color coding for easy polarity identification Useful for battery chargers and compatible RC electronics Ideal for repairs and custom cable builds Easy addition to any RC workbench or pit box 📦 Includes (1) Red 4mm Banana Plug (1) Black 4mm Banana Plug 📊 Specifications Specification Details Brand BOOF RC Product Type Banana Plugs Connector Size 4mm Colors Red & Black Quantity 2 Application RC Charging & Electronics  

Read more less

🚤💨 60+ MPH Self-Righting Deep-V with Massive 8S Brushless Power The Pro Boat Sonicwake 36" V3 Self-Righting RTR Brushless Boat combines serious 8S power with the convenience and confidence of an advanced self-righting Deep-V hull. Capable of speeds exceeding 60 MPH, the Sonicwake V3 is powered by a Spektrum 1350Kv brushless motor and 160A marine ESC, with water cooling to keep temperatures under control during hard runs. The V3 also brings practical upgrades including the SSL battery tray system, dual water pickups, adjustable trim tabs, a breakaway rudder, and replaceable bow. Whether you're ripping across open water or running in choppier conditions, the Sonicwake 36" V3 delivers big-boat speed with a durable, user-friendly design. 🚤 About the Sonicwake 36" V3 ⚡ 60+ MPH 8S Brushless Power A massive Spektrum 74x40mm 4-pole 1350Kv brushless motor pairs with a Spektrum 160A marine ESC to deliver hard acceleration and speeds exceeding 60 MPH. Designed to run on two 4S LiPo batteries for 8S power, the system is water-cooled to help maintain consistent performance during high-speed operation. 🔄 Self-Righting Deep-V Hull The Sonicwake V3's self-righting hull is designed to return the boat upright after a rollover, helping eliminate the dreaded upside-down boat stranded in the middle of the lake. Its Deep-V hull design also provides stability and predictable handling through varying water conditions. 🔧 Improved Hardware & Easy Maintenance The SSL (Strap, Slide, Lock) battery tray system makes installing and removing batteries fast and secure. Adjustable trim tabs allow handling to be fine-tuned, while a longer breakaway rudder provides responsive steering with added protection against impacts. Dual water pickups, a replaceable bow, and magnetic grease catch further simplify maintenance and improve durability. 🔧 Features 60+ MPH performance capability Powerful 8S brushless power system Spektrum 1350Kv 4-pole brushless motor Spektrum 160A marine brushless ESC Self-righting Deep-V hull design Water-cooled motor and ESC Dual water pickup cooling system SSL Strap, Slide, Lock battery tray system Longer breakaway rudder design Adjustable trim tabs Replaceable bow cone Magnetic grease catch Waterproof steering electronics Waterproof receiver box Spektrum SLT3 3-channel 2.4GHz radio system Durable injection-molded ABS hull Ready-To-Run assembly 📦 Includes (1) Pro Boat Sonicwake 36" V3 Self-Righting Deep-V Brushless Boat – Black (1) Spektrum SLT3 3-Channel SLT Transmitter (1) Spektrum SR315 Receiver (1) Spektrum 160A Brushless Marine ESC (1) Spektrum 74x40mm 4-Pole 1350Kv Brushless Motor (1) SSL Battery Tray System (1) Boat Stand 🔋 Needed to Complete (2) 4S 100C LiPo Batteries with IC5® or EC5™ Connectors (1) Compatible Dual LiPo Battery Charger 📊 Specifications Specification Details Part Number PRB-2171 Hull Type Deep-V Power Source 8S LiPo (29.6V) Motor Spektrum 74x40mm 4-Pole 1350Kv Brushless ESC Spektrum 160A Brushless Marine Top Speed 60+ MPH Length 36in (914mm) Width 11in (279mm) Height 4in (101.6mm) Weight 7.9lb (3.58kg) Hull Material Injection-Molded ABS Radio Spektrum SLT3 3-Channel Receiver Spektrum SR315 Self-Righting Yes Completion Level Ready-To-Run (RTR) ⚠️ Notes Batteries and charger are not included. Requires two 4S 100C LiPo batteries with IC5 or EC5 connectors for 8S operation. Capable of speeds exceeding 60 MPH; use in a large, open body of water with adequate room for safe operation. Ready-To-Run includes the installed electronics and transmitter but requires the items listed under Needed to Complete.  

Read more less

  🏁🔥 Purpose-Built Brushless Dirt Oval Racing Performance The Traxxas Slash® Modified 1/10 RTR 2WD Dirt Oval Racer brings serious short-track action to the proven Slash platform. Designed specifically for dirt oval racing, the Slash Modified combines a powerful BL-2s™ brushless system, Extreme Heavy Duty components, the race-proven Magnum 272R™ transmission, and a low-CG chassis for fast, predictable performance around the oval. Finished with a detailed clipless Modified body and officially licensed Hoosier® Angle Block tires, this Ready-To-Race® machine delivers the durability, handling, and aggressive styling needed for competitive racing and all-day track action. 🏎️ About the Slash Modified ⚡ BL-2s Brushless Power The Traxxas BL-2s brushless system pairs a 3300Kv brushless motor with the BL-2s ESC for responsive acceleration, smooth throttle control, and dependable 2S performance. The motor's integrated cooling fan and low-maintenance brushless design help maintain consistent performance through long race sessions. 💪 Extreme Heavy Duty Components Factory-installed Extreme Heavy Duty suspension and drivetrain components give the Slash Modified the strength needed to withstand wheel-to-wheel racing, hard impacts, and demanding dirt oval conditions. Reinforced suspension arms and heavy-duty drivetrain components help keep the car on the track and out of the pits. ⚙️ Magnum 272R Transmission The Pro Series Magnum 272R™ transmission is built for demanding brushless performance with all-metal gears, a sealed silicone-filled differential, and an aluminum motor plate. Its low-CG configuration improves weight distribution and helps provide predictable traction and handling through fast oval corners. 🏁 Dirt Oval Race Setup The low-center-of-gravity chassis works with aluminum GTR shocks and officially licensed Hoosier Angle Block tires to provide responsive handling and dependable grip. A reinforced clipless Modified body completes the race-ready package while allowing quick chassis access without traditional body clips. 🔧 Features BL-2s 3300Kv brushless power system Purpose-built 2WD dirt oval racing platform Pro Series Magnum 272R transmission All-metal transmission gears Sealed silicone-filled differential Aluminum motor plate Extreme Heavy Duty suspension and drivetrain components Low-CG chassis for improved handling Aluminum GTR oil-filled shocks with threaded collars Clipless Modified race body with internal reinforcement Officially licensed Hoosier Angle Block tires Graphite gray steelie-style wheels Digital 2075 steering servo TQ™ 2.4GHz radio system Ready-To-Race® assembly 📦 Includes (1) Traxxas Slash Modified 1/10 RTR 2WD Dirt Oval Racer (1) BL-2s 3300Kv Brushless Motor (1) BL-2s Electronic Speed Control (1) Digital 2075 Steering Servo (1) TQ 2.4GHz Radio System (1) Instruction Manual 🔋 Needed to Complete (1) 2S LiPo Battery with Traxxas iD® Connector (1) Compatible LiPo Battery Charger (4) AA Batteries for Transmitter 📊 Specifications Specification Details Part Number 104354-74 Scale 1/10 Vehicle Type Dirt Oval Modified Drive 2WD Power Source 2S LiPo Length 25.8in (656mm) Wheelbase 13.1in (333mm) Width 12.3in (313mm) Height 8.52in (216mm) Weight Without Battery 5.62lb (2.55kg) Motor BL-2s 3300Kv Brushless ESC BL-2s Brushless Connector Traxxas iD Servo Digital 2075 Wheel Hex 12mm Front Tires Licensed Hoosier Angle Block Rear Tires Licensed Hoosier Angle Block Assembly Level Ready-To-Run (RTR) ⚠️ Notes Battery and charger are not included. Requires a 2S LiPo battery with Traxxas iD connector. Purpose-built for dirt oval racing with a dedicated Modified body, suspension setup, and Hoosier tire package. Ready-To-Run models include the installed electronics and transmitter but may require the additional items listed under Needed to Complete.  

Read more less

  🔌⚡ Easily Connect EC5 & T-Style Connectors—No Soldering Required The Samix EC5 Male to T-Style Female Adapter offers a quick and reliable way to connect components with different connector types. Featuring an EC5 male connector on one end and a T-style (Deans®-style) female connector on the other, this plug-and-play adapter eliminates the need for soldering or cutting wires. Wrapped in durable heat-shrink tubing, it provides a secure connection and dependable performance for RC vehicles, batteries, chargers, and ESCs. 🔌 About the EC5 to T-Style Adapter ⚡ Simple Plug-and-Play Solution Connect compatible batteries, ESCs, chargers, and other electronics with different connector styles in seconds—no permanent modifications required. 🛡️ Durable Construction High-quality connectors and protective heat-shrink tubing help provide long-lasting durability while protecting the wiring from everyday wear. 🚗 Great for Mixed Connector Setups Perfect for RC enthusiasts who use equipment with both EC5 and T-style connectors, allowing you to maximize compatibility without replacing existing connectors. 🔧 Features ✔ EC5 male to T-style female adapter✔ No soldering or wire cutting required✔ Plug-and-play installation✔ Durable heat-shrink protection✔ Secure and reliable electrical connection✔ Compatible with a variety of RC batteries and electronics✔ Compact, lightweight design 📦 Includes (1) Samix EC5 Male to T-Style Female Adapter 📊 Specifications Specification Details Connector 1 EC5 Male Connector 2 T-Style (Deans®-Style) Female Construction Heat-shrink protected wiring Installation Plug-and-Play 🚗 Compatibility Compatible with: EC5-equipped batteries, ESCs, and chargers T-style (Deans®-style) connector-equipped batteries, ESCs, and chargers Always verify connector orientation and your equipment's voltage and current requirements before use. ⚠️ Notes Designed to adapt EC5 male connections to T-style (Deans®-style) female connections. Does not change battery voltage or electrical characteristics. Always confirm connector compatibility before connecting electronic components.

Read more less

 🏁 Factory Precision. Reliable Suspension Geometry. Race-Ready Performance. Keep your Team Associated DR10M performing at its best with the genuine Team Associated Arm Mount "D". Designed to maintain accurate rear suspension geometry, this factory replacement arm mount ensures consistent handling, durability, and a perfect fit every time. Whether you're replacing a damaged component or freshening up your race car, using genuine Team Associated parts helps keep your DR10M handling exactly as the engineers intended. ⚡ Features: 🏁 Genuine Team Associated replacement part⚙️ Maintains precise rear suspension geometry💪 Durable molded composite construction for long-lasting performance🎯 Factory fit for easy installation🔧 Ideal for routine maintenance, repairs, or race-day spares🚀 Helps restore consistent handling and suspension alignment 📦 Includes: (1) Team Associated Arm Mount "D" 📏 Specifications: Part Number: ASC72079 Type: Rear Arm Mount "D" Material: Composite 🔧 Compatibility: ✅ Team Associated DR10M 💡 Pro Tip: Suspension arm mounts play a critical role in your car's handling by controlling suspension geometry. If an arm mount becomes bent or damaged after a hard impact, replacing it with a genuine Team Associated part helps restore proper alignment and predictable handling on the track. 🏁🔧🚗    

Read more less

 ⚙️ Stronger Links. Smoother Suspension. Race-Ready Durability. Keep your suspension and steering performing at their best with the Team Associated HD 8mm Ballstuds (Short). Engineered for the latest Team Associated platforms, these heavy-duty replacement ball studs provide smooth linkage movement, increased durability, and reliable performance under the toughest racing conditions. Whether you're replacing worn hardware or building a fresh kit, these genuine Team Associated parts help maintain precise suspension geometry and consistent handling. ⚡ Features: 💪 Heavy-duty steel construction for increased durability🎯 Precision-machined for smooth suspension and steering movement🏁 Genuine Team Associated replacement part🔧 Short 8mm design for proper factory fitment⚙️ Helps maintain accurate suspension geometry and steering performance🛠️ Ideal for routine maintenance or race-day repairs 📦 Includes: (4) Team Associated HD 8mm Ballstuds (Short) 📏 Specifications: Part Number: ASC32040 Type: HD Ballstud (Short) Length: 8mm Material: Hardened Steel 🔧 Compatibility: ✅ Team Associated RC10 B7.1✅ Team Associated RC10 B7.1D✅ Team Associated TC8 💡 Pro Tip: Ball studs experience constant movement and wear during racing. Replacing worn ball studs when installing new rod ends or rebuilding your suspension helps eliminate slop, improves steering precision, and keeps your vehicle handling consistently throughout every race. 🏁🔧

Read more less

🏁🔩 Essential Replacement Hardware for Your 1RC Racer The 1RC Racing Self-Tapping Screw Set is a genuine replacement hardware package designed for the 1RC 1/18 chassis line. Whether you're replacing missing hardware, rebuilding your car, or repairing stripped mounting points, these screws provide a dependable fastening solution to keep your vehicle race-ready. Manufactured to factory specifications, these coarse-thread socket head screws deliver excellent holding power in plastic components while maintaining the fit and reliability expected from genuine 1RC parts. 🏁 About the Self-Tapping Screw Set 🔧 Genuine 1RC Replacement Built to original 1RC specifications, these screws provide the proper fit and function for compatible 1RC vehicles. 💪 Excellent Holding Power The coarse self-tapping thread design creates a strong grip in plastic components, helping resist loosening caused by vibration and repeated use. 🛠️ Perfect for Repairs & Rebuilds Ideal for: Replacing lost hardware Repairing stripped screw holes Routine maintenance Vehicle rebuilds Stocking pit box essentials 🔧 Features ✔ Genuine 1RC Racing replacement part✔ Self-tapping socket head cap screw design✔ Coarse threads provide strong grip in plastic components✔ Ideal for replacing worn or stripped hardware✔ Direct replacement fit✔ Great for maintenance and race-day repairs✔ Convenient 20-piece package 📦 Includes (20) Self-Tapping Socket Head Cap Screws 📊 Specifications Specification Details Screw Size M1.6 x 10mm Thread Type Self-Tapping / Coarse Thread Head Style Socket Head Cap Quantity 20 🚗 Compatibility 1RC Racing Asphalt Late Model 1RC Racing Asphalt Modified 1RC Racing EDM 3.0 1RC Racing Late Model 2.0 1RC Racing Midget 4.0 1RC Racing Modified 1RC Racing Sprint Car 4.0 1RC Racing Super Modified ⚠️ Notes Genuine 1RC Racing replacement hardware. Designed for use on compatible 1RC chassis platforms. Coarse-thread design may be used to restore holding strength in previously stripped plastic mounting holes. Verify compatibility before installation. 💡 Pro Tip: Keep an extra pack of self-tapping screws in your pit box—small hardware is easy to lose, and these larger coarse-thread screws can be a lifesaver when a plastic mounting hole starts to wear out. 🏁🔩🔥    

Read more less

🏁🔧 The Right Tool for the Job The 1RC Racing Solid Kingpin Removal Tool is a specialty tool designed to simplify maintenance on compatible 1RC front axle assemblies. Instead of risking damage with improvised methods, this tool allows racers to safely and efficiently remove solid kingpins during repairs, upgrades, or routine maintenance. Whether you're servicing your front suspension at home or making trackside repairs, this dedicated tool helps make the job faster and easier. 🏁 About the Solid Kingpin Removal Tool 🔧 Designed Specifically for 1RC Applications This tool was developed to remove the 1RC3012 Solid Front King Pins used in compatible 1RC front axle assemblies, helping eliminate frustration and reduce the chance of damaging components during disassembly. ⚡ Simplifies Maintenance Perfect for: Front-end rebuilds Suspension maintenance Kingpin replacement Race-day repairs Routine servicing 💪 Durable Two-Piece Design The tool consists of a removal block and pin knob designed to work together for controlled kingpin extraction. 🔧 Features ✔ Genuine 1RC Racing specialty tool✔ Designed specifically for removing solid front kingpins✔ Simplifies front suspension maintenance✔ Helps reduce the risk of component damage✔ Easy-to-use two-piece design✔ Ideal for trackside repairs and workshop use✔ Essential addition to any 1RC pit box 📦 Includes (1) Solid Kingpin Removal Tool Block (1) Solid Kingpin Removal Tool Pin Knob 🚗 Compatibility Designed for use with 1RC3012 Solid Front King Pins, including compatible front axle assemblies found on select 1RC platforms. This tool is used to service the 1RC3006 Front Axle Assembly. 💡 Perfect For ✔ 1RC racers✔ Front suspension rebuilds✔ Routine maintenance✔ Pit box tool collections✔ Fast kingpin removal at the track ⚠️ Notes Genuine 1RC Racing specialty tool. Intended for use with compatible 1RC solid kingpin front axle assemblies. Designed to remove 1RC3012 Solid Front King Pins. Verify compatibility before use. 💡 Pro Tip: Dedicated specialty tools save time and prevent unnecessary damage. If you regularly service your 1RC front end, the 1RC8820 is one of those tools you'll be glad you have in your pit box. 🏁🔧🔥    

Read more less

🏁🔩 Essential Replacement Hardware for Your 1RC Racer The 1RC Racing Hardware Set is a genuine replacement hardware kit designed to help keep your 1RC vehicle assembled, maintained, and race-ready. Whether you're replacing lost hardware, completing a rebuild, or preparing your pit box with essential spares, this kit provides the factory hardware needed to service your 1RC chassis. Manufactured to original 1RC specifications, this hardware set delivers the fit and reliability racers depend on. 🏁 About the Hardware Set 🔧 Genuine 1RC Replacement Built to factory specifications, this hardware set provides the correct replacement hardware for compatible 1RC platforms. 🛠️ Perfect for Maintenance & Repairs Ideal for: Replacing missing hardware Routine maintenance Vehicle rebuilds Race-day repairs Stocking essential pit box spares 💪 Keep Your Car Race-Ready Having replacement hardware readily available helps minimize downtime and keeps you prepared for unexpected repairs at the track. 🔧 Features ✔ Genuine 1RC Racing replacement part✔ Factory-spec hardware assortment✔ Direct replacement fit✔ Ideal for maintenance and rebuilds✔ Great addition to any pit box✔ Helps restore original assembly and reliability 📦 Includes (1) 1RC Racing 1/18 Hardware Set 🚗 Compatibility 1RC Racing 1/18 Midget 1RC Racing 1/18 Sprint 1RC Racing 1/18 EDM 1RC Racing 1/18 Late Model 💡 Perfect For ✔ Replacing lost or worn hardware✔ Complete vehicle rebuilds✔ Routine maintenance✔ Race-day repairs✔ Keeping spare hardware in your pit box ⚠️ Notes Genuine 1RC Racing replacement component. Designed specifically for compatible 1RC Racing 1/18 platforms. Hardware contents may vary based on the manufacturer's packaging. Verify compatibility before installation. 💡 Pro Tip: A complete hardware kit is one of the most valuable spare parts you can keep on hand. Small screws and fasteners are easy to lose during maintenance, and having replacements ready can save a race night. 🏁🔩🔥      

Read more less

🏁🔩 Secure Your Wheels with Confidence The 1RC Racing Wheel Nut Set is a genuine replacement hardware package designed to keep your wheels securely fastened during every lap. Featuring durable nylon lock nuts, this convenient 10-piece set is ideal for routine maintenance, race-day repairs, or stocking your pit box with essential spares. Built to factory specifications, these wheel nuts provide the dependable fit and holding power needed to keep your 1RC racer performing at its best. 🏁 About the Wheel Nut Set 🔒 Nylon Locking Design The integrated nylon insert helps resist loosening caused by vibration and repeated racing action, providing added confidence during competition. 🔧 Genuine 1RC Replacement Manufactured to original 1RC specifications, these replacement wheel nuts deliver the fit and reliability expected from factory components. 🛠️ Pit Box Essential Wheel nuts are among the most commonly misplaced hardware items. Keeping extras on hand ensures you're always prepared for quick repairs and maintenance. 🔧 Features ✔ Genuine 1RC Racing replacement part✔ Durable nylon lock nut design✔ Helps resist loosening from vibration✔ Direct replacement for factory hardware✔ Ideal for maintenance and race-day repairs✔ Convenient 10-piece package 📦 Includes (10) Nylon Lock Nuts 📊 Specifications Specification Details Thread Size 2 x 0.4 x 4mm Type Nylon Lock Nut Quantity 10 🚗 Compatibility 1RC Racing Asphalt Late Model 1RC Racing Asphalt Modified 1RC Racing EDM 3.0 1RC Racing Late Model 2.0 1RC Racing Midget 4.0 1RC Racing Modified 1RC Racing Sprint Car 4.0 1RC Racing Super Modified 💡 Perfect For ✔ Replacing lost wheel nuts✔ Routine maintenance✔ Race-day repairs✔ Pit box spare hardware✔ Keeping your 1RC race-ready ⚠️ Notes Genuine 1RC Racing replacement component. Designed for compatible 1RC Racing chassis platforms. Verify compatibility before installation. Replace wheel nuts that show signs of wear or reduced locking ability. 💡 Pro Tip: A small container of spare wheel nuts in your pit box can save an entire race night—these tiny parts have a habit of disappearing when you need them most! 🏁🔩🔥    

Read more less

🏁🔧 Keep Your Suspension Operating Smoothly The 1RC Racing Shock O-Ring Set is a genuine replacement parts package designed to help maintain the smooth operation and reliability of your 1RC suspension system. Whether you're rebuilding shocks during routine maintenance or replacing worn seals, these O-rings help restore proper shock function and keep your car performing consistently. Designed to factory specifications, these replacement O-rings provide the fit and reliability needed to keep your 1RC racer track-ready. 🏁 About the Shock O-Ring Set ⚙️ Essential Shock Maintenance Shock O-rings play an important role in the operation of your suspension system, helping maintain smooth shock movement and consistent performance. 🔧 Genuine 1RC Replacement Manufactured to original 1RC specifications, these replacement O-rings provide dependable fit and function for compatible shock assemblies. 🛠️ Perfect for Rebuilds Ideal for: Routine shock maintenance Suspension rebuilds Replacing worn O-rings Keeping spare parts in your pit box 🔧 Features ✔ Genuine 1RC Racing replacement part✔ Direct replacement shock O-rings✔ Helps maintain smooth shock operation✔ Ideal for routine shock maintenance and rebuilds✔ Precision fit for compatible 1RC shock assemblies✔ Convenient 10-piece set 📦 Includes (10) 1RC Racing Shock O-Rings 🚗 Compatibility 1RC Racing Asphalt Late Model 1RC Racing Asphalt Modified 1RC Racing EDM 3.0 1RC Racing Late Model 2.0 1RC Racing Midget 4.0 1RC Racing Modified 1RC Racing Sprint Car 4.0 1RC Racing Super Modified 💡 Perfect For ✔ Shock rebuilds✔ Preventative maintenance✔ Replacing worn suspension seals✔ Pit box spare parts✔ Keeping your suspension performing consistently ⚠️ Notes Genuine 1RC Racing replacement component. Designed for use with compatible 1RC shock assemblies. Verify compatibility before installation. Regular inspection and replacement of shock seals can help maintain optimal suspension performance. 💡 Pro Tip: O-rings are inexpensive parts that can make a big difference in suspension consistency. Keeping a few spare sets on hand makes shock maintenance quick and easy between race weekends. 🏁🔧🔥

Read more less

🏁💙 Upgrade Your Suspension with Precision Tuning & Aluminum Durability The 1RC Racing Threaded Aluminum Shock Body Set is an optional performance upgrade designed for a wide range of 1RC 1/18 platforms. Replacing the stock plastic shock bodies, these blue anodized aluminum bodies provide improved durability, smoother shock operation, and easy ride height adjustments thanks to their threaded design and adjustable spring collars. Perfect for racers looking to fine-tune their setup while adding a premium appearance to their 1RC chassis. 🏁 About the Threaded Aluminum Shock Body Set ⚙️ Easier Suspension Tuning The threaded shock body design allows for quick and precise spring preload adjustments using the included threaded collars, making setup changes simple and repeatable. 💪 Improved Durability Constructed from aluminum, these upgraded shock bodies offer increased strength and longevity compared to the stock plastic components. ✨ Premium Appearance Finished in an eye-catching blue anodized coating, these shock bodies add a custom look that stands out on any 1RC build. 🔧 Features ✔ Optional aluminum shock body upgrade✔ Blue anodized finish✔ Threaded shock bodies for precise tuning✔ Adjustable spring collars for easy preload adjustments✔ Improved durability over stock plastic bodies✔ Promotes smoother shock operation✔ Direct stock fitment✔ Adds premium appearance and detail 📦 Includes (1) 1RC Racing 1/18 Threaded Aluminum Shock Body Set (4 Shock Bodies) 🚗 Compatibility 1RC Racing Asphalt Late Model 1RC Racing Asphalt Modified 1RC Racing EDM 3.0 1RC Racing Late Model 2.0 1RC Racing Midget 4.0 1RC Racing Modified 1RC Racing Sprint Car 4.0 1RC Racing Super Modified 💡 Perfect For ✔ Suspension tuning enthusiasts✔ Racers seeking easier adjustments✔ Upgrading from plastic shock bodies✔ Custom 1RC builds✔ Adding durability and style ⚠️ Notes These are not complete oil-filled shocks. This kit replaces the stock plastic shock bodies only. Stock shock caps must be reused. The included drill bit must be used to drill the stock shock caps to provide proper shock ventilation. Designed as an optional upgrade for compatible 1RC platforms. Verify compatibility before installation. 💡 Pro Tip: The threaded collars make trackside adjustments quick and hassle-free, allowing you to fine-tune spring preload without the frustration of traditional clip-style spacers. 🏁💙🔧

Read more less

🏁🔧 Restore Consistent Front Suspension Performance The 1RC Racing Front Spring Set is a genuine replacement spring set designed specifically for the 1RC 1/18 Late Model platform. Whether you're replacing worn springs, rebuilding your front suspension, or refreshing your setup between race weekends, this factory replacement set helps maintain the handling characteristics and suspension performance your Late Model was designed to deliver. Built to original 1RC specifications, these springs provide the fit and reliability needed to keep your car race-ready. 🏁 About the Front Spring Set ⚙️ Factory Suspension Performance Front springs play a critical role in maintaining proper ride characteristics, helping your Late Model absorb track imperfections and deliver predictable handling. 🔧 Genuine 1RC Replacement Manufactured to original specifications, this spring set restores the factory fit and suspension function of your 1RC Late Model. 💪 Built for Racing Designed to withstand the demands of competitive oval racing while providing consistent suspension operation throughout every heat and feature. 🔧 Features ✔ Genuine 1RC Racing replacement part✔ Direct replacement front spring set✔ Restores factory suspension performance✔ Helps maintain consistent front-end handling✔ Durable spring construction✔ Precision fit for easy installation✔ Ideal for maintenance and race-day repairs 📦 Includes (1) 1RC Racing 1/18 Late Model Front Spring Set 🚗 Compatibility 1RC Racing 1/18 Late Model 1RC Racing 1/24 Asphalt Late Model 💡 Perfect For ✔ Replacing worn front springs✔ Front suspension maintenance✔ Late Model rebuilds✔ Race-day repairs✔ Keeping essential spare parts in your pit box ⚠️ Notes Genuine 1RC Racing replacement component. Designed specifically for the 1RC Racing 1/18 Late Model platform. Verify compatibility before installation. 💡 Pro Tip: Suspension springs gradually lose consistency over time. Replacing tired springs can help restore predictable handling and keep your Late Model performing the same way, race after race. 🏁🔧🔥

Read more less

🏁⚙️ Fine-Tune Your Sprint Car's Track Width The 1RC Racing Sprint Offset Wheel Hex Set allows Sprint Car 4.0 drivers to quickly adjust wheel offset and overall track width for improved setup flexibility. Featuring both +1mm and +2mm offset hexes, this genuine 1RC replacement set gives racers the ability to make subtle handling changes while maintaining factory fit and reliability. Whether you're experimenting with setup changes or replacing worn components, these offset hexes provide an easy way to customize your Sprint Car's stance and performance. 🏁 About the Sprint Offset Wheel Hex Set ⚙️ Adjustable Offset Options This set includes two different offset sizes, allowing you to fine-tune your vehicle setup: +1mm Offset Hexes +2mm Offset Hexes Small offset adjustments can influence vehicle stability, cornering characteristics, and overall handling feel. 🔧 Genuine 1RC Replacement Manufactured to original 1RC specifications for precise fitment and dependable performance. 💪 Built for Racing Designed to withstand the demands of competitive oval racing while providing consistent wheel mounting performance. 🔧 Features ✔ Genuine 1RC Racing replacement part✔ Includes two offset options for setup tuning✔ +1mm and +2mm wheel hex configurations✔ Helps fine-tune vehicle track width✔ Precision fit for Sprint Car 4.0 applications✔ Durable construction for reliable performance✔ Easy installation and setup changes 📦 Includes (2) +2mm Offset Wheel Hexes (2) +1mm Offset Wheel Hexes 🚗 Compatibility 1RC Racing Sprint Car 4.0 💡 Perfect For ✔ Sprint Car setup tuning✔ Adjusting track width✔ Replacing worn wheel hexes✔ Race-day experimentation✔ Keeping spare setup parts in your pit box ⚠️ Notes Genuine 1RC Racing replacement component. Designed specifically for the 1RC Racing Sprint Car 4.0. Includes both +1mm and +2mm offset options to accommodate different setup preferences. Verify compatibility before installation. 💡 Pro Tip: Even small changes in wheel offset can affect how your Sprint Car rotates through the corners. Experiment with the included +1mm and +2mm hexes to find the setup that best suits your track conditions and driving style. 🏁⚙️🔥            

Read more less

🏁🔧 Keep Your Front-End Steering Dialed In The 1RC Racing Adjustable Front Tie Rod is a genuine replacement steering component designed specifically for the 1RC 1/18 Midget, Sprint, and EDM platforms. Engineered to maintain proper steering geometry and front-end alignment, this adjustable tie rod helps deliver the precise handling and responsiveness needed for competitive racing. Whether you're replacing a bent component after a racing incident or performing routine maintenance, this factory replacement restores the fit and performance your 1RC racer was designed to provide. 🏁 About the Adjustable Front Tie Rod ⚙️ Adjustable Design The adjustable configuration allows for proper steering setup while maintaining accurate front-end alignment and predictable handling characteristics. 🔧 Genuine 1RC Replacement Manufactured to original 1RC specifications, this tie rod provides dependable fit, function, and easy installation. 💪 Built for Racing Designed to handle the demands of competitive oval racing while delivering reliable steering performance throughout every heat and feature event. 🔧 Features ✔ Genuine 1RC Racing replacement part✔ Adjustable front tie rod design✔ Helps maintain proper steering geometry✔ Restores factory steering performance✔ Direct replacement installation✔ Durable construction for dependable operation✔ Ideal for maintenance and race-day repairs 📦 Includes (1) 1RC Racing 1/18 Adjustable Front Tie Rod 🚗 Compatibility 1RC Racing 1/18 Midget 1RC Racing 1/18 Sprint 1RC Racing 1/18 EDM 💡 Perfect For ✔ Replacing bent or damaged steering components✔ Front-end maintenance✔ Steering system rebuilds✔ Race-day repairs✔ Keeping essential spare parts in your pit box ⚠️ Notes Genuine 1RC Racing replacement component. Designed specifically for the 1RC Racing 1/18 Midget, Sprint, and EDM platforms. Verify compatibility before installation. 💡 Pro Tip: Even slight bends in front steering links can impact alignment and handling. Keeping spare adjustable tie rods in your pit box helps ensure you're always ready for the next heat race. 🏁🔧🔥          

Read more less

🏁⚙️ Restore Reliable Steering Performance The 1RC Racing Plastic Servo Arm is a genuine replacement servo horn designed specifically for the 1RC 1/18 Midget and Sprint platforms. Whether you're replacing a worn servo arm after a hard race or performing routine maintenance, this factory replacement restores the original steering performance and fit your 1RC racer was built to deliver. Constructed from durable molded plastic, this servo arm is engineered to provide dependable operation while maintaining the proper steering geometry of your vehicle. 🏁 About the Plastic Servo Arm 🔧 Genuine 1RC Replacement Manufactured to original 1RC specifications, this servo arm provides the precise fit and functionality expected from factory replacement components. ⚙️ Maintains Steering Performance The servo arm transfers steering input from the servo to the steering linkage, helping maintain smooth, predictable steering response. 💪 Durable Construction Built from durable molded plastic, this replacement component is designed to withstand the demands of competitive racing while remaining lightweight and reliable. 🔧 Features ✔ Genuine 1RC Racing replacement part✔ Direct replacement servo arm design✔ Durable molded plastic construction✔ Maintains factory steering geometry✔ Lightweight and dependable✔ Easy installation✔ Ideal for maintenance and race-day repairs 📦 Includes (1) 1RC Racing 1/18 Plastic Servo Arm 📊 Specifications Specification Details Spline 21T Material Molded Plastic Application Servo Arm Scale 1/18 🚗 Compatibility 1RC Racing 1/18 Midget 1RC Racing 1/18 Sprint 💡 Perfect For ✔ Replacing worn or damaged servo arms✔ Steering system maintenance✔ Race-day repairs✔ Restoring factory steering performance✔ Keeping spare parts in your pit box ⚠️ Notes Genuine 1RC Racing replacement component. Designed specifically for the 1RC Racing 1/18 Midget and Sprint platforms. Intended for use with compatible 21T spline servos. Verify spline compatibility before installation. 💡 Pro Tip: Plastic servo arms can act as an inexpensive "fuse" in the steering system, often absorbing impact forces before they can damage more expensive steering components or the servo itself. 🏁⚙️🔥        

Read more less