Boof RC XT60 Male to XT90 Female Power Adapter – 12AWG / 5cm Need to adapt an XT60 battery connection to an XT90 system? The Boof RC XT60 Male to XT90 Female Power Adapter provides a compact and reliable solution for connecting different power connector types without modifying your batteries or ESC. Built with heavy-duty 12AWG wire, this adapter is designed to handle high current loads while maintaining excellent conductivity and durability. The short 5cm length keeps your setup clean and compact while minimizing unnecessary wire clutter. 🔧 Features:• XT60 Male to XT90 Female power adapter• 12AWG heavy-duty wire for high current capability• Compact 5cm length for a clean installation• Durable connectors for reliable power transfer• Perfect for adapting battery and ESC connector types 🏁 Perfect For:• High-performance RC cars and trucks• Converting XT60 batteries to XT90 systems• Clean adapter setups in tight chassis layouts• Custom RC electronics builds The Boof RC XT60 to XT90 adapter makes it easy to connect mixed power systems while maintaining dependable performance and a tidy wiring setup.

Read more less

Need a clean, reliable way to extend your servo wiring? The Boof RC Male to Female Servo Extension Wires make it easy to add extra reach between your receiver and servo without compromising signal quality. Perfect for RC racers, crawlers, airplanes, boats, and custom builds where clean wiring and proper routing matter. Built with quality connectors and flexible wire, these extensions are designed for dependable performance whether you're setting up a tight race chassis or a larger-scale build that needs extra length. 🔧 Features:• Male to Female servo extension configuration• Clean and secure signal transfer• Flexible wire for easy routing inside tight chassis• Ideal for receivers, servos, ESC signal leads, and accessories• Compatible with most standard RC servo connectors 📏 Available Lengths:• 100mm• 150mm• 200mm• 300mm 🏁 Perfect For:• Clean servo wiring setups• Custom electronics layouts• Extending receiver-to-servo connections• Cars, trucks, crawlers, boats, and aircraft Whether you're tidying up your electronics or building a new rig from scratch, Boof RC servo extensions give you the extra length you need with reliable performance.      

Read more less

Improve stability and cornering performance on your Traxxas Slash 2WD with the Hot Racing Front & Rear Wide Sway Bar Set (HRATE311SLC). Designed to reduce chassis roll and improve handling balance, this sway bar kit helps keep your Slash 2WD planted and predictable through corners. The wide sway bar design increases suspension stability during high-speed turns and aggressive driving, making it a great upgrade for racers and bashers looking to sharpen the handling of their Traxxas Slash. Features• Front and rear sway bar system for improved handling• Wide sway bar design helps reduce chassis roll• Improves cornering stability and control• Durable construction for long-lasting performance• Ideal upgrade for Traxxas Slash 2WD Compatibility• Traxxas Slash 2WD Includes• (1) Front Sway Bar Assembly• (1) Rear Sway Bar Assembly• Installation hardware and components  

Read more less

Dominate the track with the Hobbywing XeRun XR8 Pro G3 ESC & 3652SD Motor Combo. Designed for serious racing performance, this advanced electronics bundle delivers incredible power, precision tuning, and durability for 1/10 Short Course trucks and select 1/8 race applications. With cutting-edge smart technologies, customizable tuning options, and industry-leading reliability, the XR8 Pro G3 system gives racers the performance and control needed to stay ahead of the competition. ⚡ Advanced Smart Technology The XR8 Pro G3 introduces Smart Freewheeling technology, improving drive efficiency while reducing ESC temperatures by up to 59°F compared to previous generations. With Boost and Turbo Timing up to 48°, racers can unlock up to 50% more performance when paired with Hobbywing G3 motors. A unique dual brake system with disc brake simulation provides extremely smooth, linear braking—similar to real vehicle braking systems—for superior control during corner entry. 🎛 Fully Adjustable Performance The ESC includes 32 adjustable parameters, allowing racers to fine-tune everything from throttle response to timing. Three built-in racing profiles make setup fast and easy: Zero Timing / Blinky Mode Off-Road Racing Mode On-Road Racing Mode Programming can be done using: LCD Program Box Pro OTA Programmer HW LINK mobile app Firmware updates and data logging are also supported. 🛡 Durability & Protection Built for demanding racing environments, the XR8 Pro G3 includes multiple protection systems: Reverse polarity protection Capacitor thermal protection IP5X dust resistance Intelligent frameless cooling fan Ultra-soft 11AWG silicone wiring These features ensure reliable performance even under intense racing conditions. 🏁 Features Smart Freewheeling technology for improved efficiency Up to 48° Boost and Turbo timing adjustment Dual brake system with disc brake control 32 adjustable parameters for advanced tuning Three preconfigured racing profiles Reverse polarity protection Capacitor thermal overload protection IP5X dustproof rating Intelligent frameless cooling fan Firmware updates and data logging via HW LINK 📦 Includes (1) XR8 Pro G3 Sensored Brushless ESC (1) 3652SD Sensored Brushless Motor (4500kV) Product Manual 📊 ESC Specifications Input Voltage: 2-4S LiPo Continuous Current: 200A Peak Current: 1080A BEC Voltage: 6V – 7.4V BEC Current: 6A Continuous Dimensions: 54.8 × 36.8 × 38.8mm Weight: 102.8g 📊 Motor Specifications Motor Type: Sensored Brushless kV Rating: 4500kV Poles: 4 Input Voltage: 2S LiPo Diameter: 36.6mm Length: 53mm Weight: 189g Built for racers who demand maximum power, precise tuning, and race-proven durability, the XR8 Pro G3 combo is a serious upgrade for competitive SCT racing.  

Read more less

Upgrade your pit setup with the 1UP Racing Pro Pit Tray Set with Shock Stands Combo—a sleek, all-in-one workspace solution built for racers who demand organization, efficiency, and professional presentation. This complete pit system features precision-machined aluminum construction with a dual satin and gloss black finish for a high-end look. The tray is designed with the perfect depth, smooth filleted corners, and dedicated cutouts for differential outdrives, keeping parts secure and easy to access. Hidden magnets hold body clips in place and securely attach the included on-road and off-road shock stands. Both shock stands feature forged carbon trays and magnetically collapse into the included protective storage box with foam inserts, making transport clean and safe. Features Precision-machined aluminum pit tray Dual satin & gloss black finish Ideal tray depth with smooth filleted corners Hidden magnets for body clip storage Differential outdrive cutouts Includes on-road and off-road shock stands Shock stands magnetically attach to tray Forged carbon shock stand trays Protective storage box with foam insert included Includes (1) Pro Pit Tray (1) Off-Road Shock Stand (1) On-Road Shock Stand (1) Storage Box with Foam Insert A premium pit solution designed to keep your workspace organized, efficient, and race-ready—every time you wrench. 🏁  

Read more less

Product Overview:The Team Associated RC10B7 Factory Team Carbon Rear Hub Set (92519) is a lightweight performance upgrade designed to improve rear-end handling and response on high-grip tracks. Featuring a -4mm offset, these carbon rear hubs help fine-tune rear geometry while reducing unsprung weight for sharper, more consistent performance. Key Features: Factory Team carbon fiber rear hubs -4mm offset for improved rear geometry and handling balance Lightweight construction for reduced unsprung mass Designed for competitive 1/10 off-road racing Precision fit and finish for reliable performance Required for Installation: Team Associated #92207 RC10B74 Rear CVA Axle (66mm) (required, sold separately) Compatibility: Team Associated RC10B7 Team Associated RC10B74 Includes: (1) Pair of Factory Team Carbon Rear Hubs

Read more less

The Kyosho MR-04 RWD Mini-Z ReadySet with the iconic 1991 Mazda 787B LM body delivers refined handling, smooth power delivery, and classic Le Mans styling in a true Ready-to-Run package. Fully assembled and factory equipped, this Mini-Z is ready to race with just the addition of batteries. Built on Kyosho’s latest MR-04 chassis, this platform improves on the legendary MR-03 with a lower center of gravity, updated steering geometry, and refined suspension design for increased grip, stability, and consistency. Perfect for beginners and seasoned Mini-Z racers alike. Key Features Fully assembled MR-04 RWD chassis with included transmitter Lower center of gravity for improved cornering and stability Updated front suspension for better tire contact and steering accuracy Integrated kingpin front knuckles reduce scrub for sharper steering response Improved ball bearings for smoother, more efficient operation Rear suspension with coil spring damper (oil shock upgrade optional) Geared differential for smooth, predictable cornering Compatible with optional gyro unit for enhanced control (sold separately) Pre-painted, highly detailed 1991 Mazda 787B LM body Includes Factory assembled MR-04 chassis Pre-painted 1991 Mazda 787B LM body (White/Blue) Perfex KT-531P 2.4GHz transmitter Front tread adjustment parts set Pinion gears: 6T, 7T, 8T, 9T Pinion gear tool Wheel wrench Instruction manual Needed to Complete (4) AAA batteries for transmitter (4) AAA batteries for chassis Specifications Scale: Mini-Z Drive: RWD Power Source: Electric Length: 7.09 in (180mm) Wheelbase: 102mm (3L) Width: 3.07 in (78mm) Height: 1.57 in (40mm) Weight: 6.43 oz (182.2g) Motor: Brushed ESC: Brushed Assembly Level: Ready-to-Run Tech Note: The KT-531P transmitter uses FHSS 2.4GHz and is not compatible with ASF, MHS, or FHS systems. A perfect blend of modern Mini-Z performance and legendary motorsports heritage—ready to run, race, and upgrade as your skills grow.

Read more less

The Kyosho MR-04 RWD Mini-Z ReadySet with the Audi R8 LMS Phoenix Racing NBR 2010 #98 body delivers precise handling and refined performance in a true Ready-to-Run package. Fully assembled and factory tuned, this Mini-Z is ready to hit the track by simply adding batteries. Built on the all-new MR-04 chassis, this platform improves upon the legendary MR-03 with a lower center of gravity, updated steering geometry, and a refined suspension layout for smoother, more predictable handling. Whether you’re new to Mini-Z racing or dialing in a competitive setup, the MR-04 provides an excellent balance of performance and upgrade potential. Key Features Fully assembled MR-04 RWD chassis with included transmitter Lower center of gravity for improved cornering and stability Updated front suspension for increased tire contact and steering accuracy Integrated kingpin front knuckles reduce scrub for sharper steering response Improved ball bearings for smoother, more efficient operation Rear suspension with coil spring damper (oil shock upgrade optional) Geared differential for smooth, consistent cornering Compatible with optional gyro unit for enhanced control (sold separately) Pre-painted, highly detailed Audi R8 LMS Phoenix Racing NBR 2010 #98 body Includes Factory assembled MR-04 chassis Pre-painted Audi R8 LMS Phoenix Racing NBR 2010 #98 body Perfex KT-531P 2.4GHz transmitter Front tread adjustment parts set Pinion gears: 6T, 7T, 8T, 9T Pinion gear tool Wheel wrench Instruction manual Needed to Complete (4) AAA batteries for transmitter (4) AAA batteries for chassis Specifications Scale: Mini-Z Drive: RWD Power Source: Electric Length: 6.54 in (166mm) Wheelbase: 98mm (LL) Width: 3.07 in (78mm) Height: 1.73 in (44mm) Weight: 6.01 oz (170.4g) Motor: Brushed ESC: Brushed Assembly Level: Ready-to-Run Tech Note: The KT-531P transmitter uses FHSS 2.4GHz and is not compatible with ASF, MHS, or FHS systems. A perfect entry into Mini-Z racing with performance potential that grows right along with your skills.

Read more less

Dial in your steering feel with the Team Associated Factory Team Adjustable KPI Steering Blocks for the RC10B7 and RC10B7D. Designed to work with the Factory Team Adjustable KPI Set (ASC92479), these steering blocks allow racers to fine-tune Kingpin Inclination (KPI) to match track conditions and driving style. This set includes both 3mm and 4mm trailing steering blocks, giving you multiple KPI adjustment options to optimize steering response, corner entry, and mid-corner stability. A must-have tuning option for competitive racers looking to extract maximum performance from their B7 platform. Features: Factory Team adjustable KPI steering block set Multiple KPI options for precise steering tuning Improves steering feel, response, and consistency Designed for use with Factory Team Adjustable KPI Set (ASC92479) Ideal for competitive off-road racing setups Includes: (1) Left 3mm trailing steering block (1) Right 3mm trailing steering block (1) Left 4mm trailing steering block (1) Right 4mm trailing steering block Compatibility: Team Associated RC10B7 Team Associated RC10B7D

Read more less

Upgrade your Axial SCX24 with the performance it deserves. The Pro-Line Aluminum Big Bore Scaler Shocks are a premium replacement for the stock plastic friction dampers, delivering smoother articulation, better control, and true oil-filled damping—all in a beautifully machined aluminum package. Designed specifically for micro crawlers, these shocks offer incredible tunability thanks to a threaded body design and leak-resistant double O-ring seals. Whether you're running a lightweight comp build or a scale rig with heavy accessories, these shocks dramatically improve suspension performance. Key Features Fully assembled and ready to install Perfect fit for Axial SCX24 and other 1/24 crawlers using 1.4mm hardware True threaded, oil-filled shock design for real damping CNC-machined aluminum caps, bodies, and lower caps Polished steel shock shafts for smooth travel Double O-ring seal prevents leaks and keeps damping consistent Includes optional stiff springs for heavier bodies or tuning preference Length: 1.32" (34mm) Specifications Scale: 1/24 Length: 1.32" (34mm) Material: CNC-machined aluminum Includes (4) Pro-Line Aluminum Big Bore Scaler Shocks Optional tuning springs

Read more less

Give your RC10B84 the world-class aero advantage it deserves with the JConcepts S15 Buggy Body. Debuted at the IFMAR World Championships, the S15 blends proven design cues from the Punisher, Finnisher, and Silencer series into a modern, high-downforce shell built for competition on carpet, turf, or dirt. Available in Standard or Lightweight versions to match your driving style and track conditions. Why Racers Choose the S15 The S15 is engineered for sharp cornering, stable straight-line tracking, and smooth airflow management. With its balanced single-cockpit layout, chamfered side pods, aggressive roof fin, and sculpted rear spoiler, this body offers increased stability without compromising steering response. It also provides generous room for decals and logos—perfect for sponsored or team drivers. Key Features IFMAR World Championship-winning S15 body design Optimized deflection angles & refined side pod winglets Centerline roof fin for improved tracking and durability Rear spoiler shape adds consistent rear downforce Tight, efficient chassis fit for max aero performance Trimmable rear section helps vent heat from electronics Available in Standard or Lightweight material options Includes (1) JConcepts RC10B84 S15 Clear Buggy Body (2) JConcepts Turf/Carpet/Dirt Wings (1) Decal Sheet (1) Window Mask Set Notes Body ships clear and unpainted Painted example shown for reference only

Read more less

Dial in your setup with absolute confidence! The 1UP Racing Pro Pit Scale delivers ultra-fine accuracy, making it the perfect tool for weighing parts, tires, diffs, hardware, and more. Whether you're chasing consistency, balancing components, or fine-tuning for race day, this compact powerhouse gives you the precision trusted by top-level racers. Engineered with a 0.01g resolution, 500g capacity, and a crisp blue backlit LCD, the Pro Pit Scale is built for serious tuning in any pit environment. A stainless steel weighing platform, laser-etched branding, and a protective cover complete the professional-grade feel. Key Features: ✔️ 0.01g Precision – High-resolution measurement for pro-level tuning✔️ 500g Capacity – Perfect for tires, diffs, hardware, and small components✔️ Stainless Steel Platform – Durable, stable, and easy to clean✔️ Blue Backlit LCD – Clear visibility in any lighting✔️ Laser-Etched 1UP Logos – Clean, premium aesthetic✔️ 9 Weighing Modes – Versatile for all hobby and workshop uses✔️ Full-Capacity Tare Range – Zero out trays or containers instantly✔️ Protective Cover & Parts Tray Included – Ready for pit bench or travel Includes: (1) 1UP Racing Pro Pit Scale (2) AA Batteries (1) Protective Cover / Parts Tray Specifications: Capacity: 500g (17.637oz) Resolution: 0.01g (0.00035oz) Overall Size: 5 × 4.17 × 0.74 in (127 × 106 × 19mm) Platform Size: 3.93 × 3.93 in (100 × 100mm)

Read more less

The Reedy Sonic 540-FT 13.5T Competition Brushless Motor delivers professional-level performance at an affordable price. Designed for spec racing, clubs, and racing series where equalized performance is key, this ROAR-approved motor combines precision engineering with durability and ease of maintenance. Featuring a lightweight CNC-machined can, high-strength balanced rotor, and dual ball bearings for smooth operation, the 540-FT offers exceptional value without compromising performance. Its fixed 45-degree timing ensures consistent power delivery and reliability for all racers. ⚙️ Features: CNC-machined lightweight aluminum can for superior cooling and precision High-strength balanced rotor for smooth, efficient operation Dual precision ball bearings for long-lasting performance Fixed 45° timing for consistency and spec-class fairness Easy-to-solder tabs for clean wiring and quick installation Fully rebuildable design for extended motor life ROAR approved for sanctioned competition use 📏 Specifications: Turns: 13.5T Timing: Fixed (45°) Input Voltage: 1–2S LiPo Diameter: 35.8 mm Length: 51.8 mm Shaft Diameter: 3.15 mm Weight: 175 g 📦 Includes: (1) Reedy Sonic 540-FT 13.5T Fixed Timing Brushless Motor 💡 Pro Tip:Pair the Sonic 540-FT with a Reedy Blackbox 600Z ESC and Reedy LiPo 2S Shorty Pack for a smooth, balanced, and race-ready setup right out of the box.  

Read more less

Bring world-class aerodynamics to your XRAY XB2 2025 buggy with the JConcepts “P2” Body, evolved from the legendary Punisher shell and refined through years of championship-winning performance. Trusted by top pros like Spencer Rivkin and Dakotah Phend, this body is designed for racers who demand speed, balance, and precision on every surface. ⚙️ Features: Forward cab design with recessed windshield and vertical rails for maximum front-end stability Signature center fin improves tracking through jumps and high-speed corners Double winglets ahead of rear tires enhance downforce and side-bite Chamfered side-pods deliver a sharp, modern look and smooth airflow Precision fit around the XRAY spur-gear guard — no trimming guesswork Includes two 6.5-inch wings ideal for carpet, turf, or dirt setups Comes with window masks, protective film, and full decal sheet 📏 Specifications: Part Number: 0691 Vehicle Compatibility: XRAY XB2 2025 1/10 2WD Buggy Material: Clear polycarbonate (unpainted) Body Thickness Options: Standard / Lightweight Wings Included: (2) 6.5-inch carpet / turf / dirt style 📦 Includes: (1) XRAY XB2 2025 “P2” Clear Body (2) JConcepts Wings (1) Decal Sheet (1) Window Mask Set 💡 Pro Tip:For the ultimate setup, pair the P2 body with JConcepts Aero Front Wings to create a balanced, high-downforce aero package proven at the IFMAR World Championships.

Read more less

Upgrade your aero package with the JConcepts Aero Front Wing — purpose-built for the Team Associated RC10B84 4WD buggy. Developed alongside top pro drivers, this radical, edgy wing design enhances steering response, downforce, and stability, giving you the extra front-end grip needed to push harder in corners and over jumps. The lower front-mounted design delivers balanced handling and complements JConcepts’ Punisher, Finnisher, Silencer, and S15 bodies, completing your high-performance setup. 🏆 Proven Performance:Used to TQ and win the 2025 IFMAR 1/10 Off-Road World Championships in Castle Hills, Australia — proof of world-class design and engineering. ⚙️ Features: Original JConcepts Aero design for the RC10B84 platform Radical, edgy styling improves steering and high-speed stability Lightweight yet durable for racing abuse Includes cut lines and dimple marks for precise trimming and easy mounting Perfect complement to JConcepts 1/10 off-road buggy bodies Mounts directly to the front gearbox of the Team Associated B84 📏 Specifications: Part Number: 0534 Vehicle Compatibility: Team Associated RC10B84 4WD Buggy Material: Lightweight polycarbonate Quantity: 2 wings per package 📦 Includes: (2) JConcepts Aero Front Wings Mounting and trimming guide 💡 Pro Tip:Pair this front wing with a JConcepts S15 or Finnisher body for a fully optimized aerodynamic setup that delivers quicker corner entry and improved jump control — proven on the world stage.  

Read more less

Officially Licensed NASCAR Style. Track-Proven Performance. Upgrade your Losi NASCAR GROM with the Ross Chastain #1 Busch Light 2025 Body, delivering the authentic look and attitude of Chastain’s real-world race car. This pre-painted, officially licensed body features high-quality graphics, durable construction, and pre-installed details for a race-ready fit right out of the box. Premium Ready-to-Run Detail Each body comes pre-painted with official Busch Light 2025 graphics, decal sheet pre-applied, and paint protection film installed to keep your GROM looking fresh after every run. Precision pre-drilled body mounts make installation effortless — just drop it on and go racing. Features: Officially licensed Ross Chastain #1 Busch Light 2025 body Pre-painted and pre-decaled for instant realism Paint protection film pre-installed to prevent scratches Durable molded body for long-lasting performance Pre-drilled mounting holes for direct fit on all NASCAR GROM vehicles Includes rear spoiler for added scale realism Includes: (1) Officially Licensed 2025 #1 Busch Light NASCAR GROM Body (1) Rear Spoiler Paint Protection Stickers (pre-installed) Compatibility: Losi NASCAR GROM Losi — Official NASCAR Performance in Mini Scale.

Read more less

Officially Licensed NASCAR Style for Your GROM. Bring championship looks to your Losi NASCAR GROM with the Christopher Bell #20 DeWalt 2025 Body Set. This officially licensed body features authentic graphics, precision detailing, and durable construction — built to capture the look of Bell’s powerful #20 DeWalt Toyota on the track. Perfect for racers and collectors, this body delivers premium realism and performance-ready design. Features: Officially licensed NASCAR Christopher Bell #20 DeWalt 2025 design High-quality molded body for durability and scale appearance Detailed printed graphics replicate the real DeWalt Toyota scheme Direct fit for Losi NASCAR GROM chassis Perfect upgrade for replacement, customization, or display Includes: (1) Christopher Bell #20 DeWalt 2025 NASCAR GROM Body Compatibility: Losi NASCAR GROM Losi — Where Real Racing Meets RC Power.

Read more less

Overview:Upgrade your touring car with the ultimate combination of lightweight performance and precision engineering. The 1UP Racing Pro Duty Titanium Lower Shock Screws are built for racers who demand strength, accuracy, and efficiency on every lap. CNC-machined from aerospace-grade titanium, these screws eliminate unnecessary unsprung weight while providing unmatched reliability and alignment accuracy for your shocks. About the Pro Duty Titanium Lower Shock Screws Titanium Strength AdvantagePrecision-machined from 6AL4V Grade 5 titanium, each screw delivers exceptional strength and corrosion resistance at a fraction of the weight of steel. The LH (left-hand) threads ensure the screws stay locked in place, even through long mains and rough track conditions. A thin integrated flange keeps the shock eye perfectly centered, while a deep 1.5 mm hex ensures consistent torque and tool engagement over countless installs. Designed specifically for plastic or composite suspension arms, these Pro Duty screws are race-proven and trusted by top-level drivers for their consistent feel and superior longevity. Features Ultra-lightweight — just 0.93 g per set of four Aerospace-grade 6AL4V (Grade 5) titanium construction CNC-machined for perfect precision Left-hand threads prevent loosening under load Built-in flange keeps shocks centered Deep 1.5 mm hex resists rounding Stronger, lighter, and more durable than steel hardware Compatible with most 1/10-scale touring cars Includes (4) Pro Duty Titanium 1/10 On-Road Lower Shock Screws Team Associated RC10 B6.4D Includes: (1) Complete Titanium Upper Screw Set (for RC10 B6.4/B6.4D)  

Read more less

Overview:The Traxxas TRX-4 Nissan Pathfinder combines legendary TRX-4 capability with the rugged style of Nissan’s off-road icon. Featuring a fully licensed Pathfinder body with a clipless mounting system, remote-locking differentials, and a high/low 2-speed transmission, this rig delivers an unmatched blend of realism, performance, and durability right out of the box. About the TRX-4 Nissan Pathfinder Officially Licensed Nissan® Pathfinder® BodyThe detailed clipless body captures the spirit of Nissan’s classic off-roader. Every contour and accessory — from the grille and bumpers to mirrors, push bar, and roof spoiler — reflects Traxxas’ focus on scale realism. Full inner fender liners and floor pans add authenticity and protect electronics from dirt and debris. Trail-Ready PerformancePowered by the Titan® 21T reverse-rotation brushed motor and XL-5™ HV waterproof ESC, the Pathfinder provides smooth control, impressive torque, and selectable drive modes — including Trail Mode and Crawl Mode for technical terrain. The portal axles increase ground clearance and eliminate torque twist, while oil-filled GTS aluminum shocks keep the ride plush and controlled. Rugged Steel BackboneA 1.5 mm-thick steel ladder frame provides extreme rigidity, adjustable wheelbase positions, and integrated wire routing clips. Heavy-duty 4-link suspension, remote-locking steel gear differentials, and a 2-speed transmission deliver the power and precision needed for serious crawling. Smart Radio SystemThe included TQi™ 2.4 GHz 4-channel radio features cruise control and can be paired with the optional Traxxas Link Wireless Module (6511) for full telemetry and tuning via the Traxxas Link app. Features Officially licensed Nissan Pathfinder clipless body Titan® 21T reverse-rotation motor XL-5™ HV waterproof ESC with 5 drive profiles High/Low 2-speed transmission with remote shifting Remote-locking front and rear differentials Portal axles for extra clearance and torque twist elimination Full-time shaft-driven 4WD drivetrain Oil-filled aluminum GTS shocks Rigid 1.5 mm steel ladder frame TQi™ 4-channel 2.4GHz radio with cruise control Ready-To-Drive® out of the box Includes (1) TRX-4 Nissan Pathfinder RTR 1/10 Scale Crawler (1) Titan® 21T Motor (1) XL-5™ HV ESC (1) TQi™ 4-channel 2.4 GHz Radio System (1) Nissan Pathfinder Clipless Body High-quality maintenance tools Needed To Complete (1) Battery Pack: 7-cell NiMH or 2S–3S LiPo (sold separately) (1) Compatible Charger (Traxxas EZ-Peak® recommended) (4) AA Batteries for Transmitter Specifications Scale: 1/10 Drive: 4WD, shaft-driven Length: 22.72 in (577 mm) Width: 9.78 in (249 mm) Height: 9.49 in (241 mm) Wheelbase: 12.28 in (312 mm) Weight: 6.78 lb (3.08 kg) Ground Clearance: 3.14 in (80 mm) Transmission: 2-speed, remote shifting Differentials: Remote locking, steel gears ESC: XL-5 HV (brushed) Motor: Titan 21T reverse rotation Servo: 2075X metal gear digital Radio: TQi 2.4GHz 4-channel with 6533 receiver

Read more less

Overview:Take your Team Associated TC8’s performance and style to the next level with the 1UP Racing CF1 Carbon Fiber Front Bumper Brace and Body Mount Plate — precision-engineered for strength, rigidity, and race-winning consistency. About the CF1 Bumper Brace & Body Mount PlateDesigned and manufactured in the USA, this premium carbon fiber upgrade provides a durable, lightweight solution that enhances the handling characteristics of your TC8. The dual-level layout mirrors the rear plate for balanced rigidity, while additional body mount locations improve shell fitment and aerodynamics. CNC-machined from top-grade carbon fiber, this plate offers a tight, perfect fit and a confidence-inspiring driving feel — ideal for high-traction track conditions. Features: Made in the USA 🇺🇸 Super lightweight carbon fiber construction One-piece design minimizes chassis flex Dual-level layout matches the rear plate for balance Adds extra body mount locations for improved fitment CNC-machined for precision and easy installation Increases cornering speed and handling stability Designed for high-traction race tracks Includes: (1) CF1 Carbon Fiber Front Bumper Brace & Body Mount Plate

Read more less

Take your TC8 to the next level with the Factory Team Carbon Fiber Battery Mount Set. This precision upgrade offers a lightweight, rigid solution that enhances battery security, reduces chassis flex, and makes on-the-fly adjustments easier than ever. Perfect for serious racers looking for consistent performance and superior handling. ✅ Ultra-Light Carbon Fiber – Strong, durable, and race-ready✅ CNC Machined – Precision fit with pro-level finish✅ Battery Flexibility – Supports both standard and LCG shorty packs✅ Performance Boost – Reduces flex for sharper response✅ Quick Adjustments – Easily fine-tune battery position front-to-rear Includes: (1) Factory Team Carbon Fiber Battery Mount Set Compatibility: Team Associated RC10TC8  

Read more less

🏁 Factory replacement chassis for your Granite Grom! The Arrma Composite Chassis (SWB) is a genuine replacement part designed to restore the structural integrity of your Granite Grom monster truck. Built from durable composite material, this chassis is engineered to handle the roughest bash sessions while maintaining the factory short wheelbase (SWB) design for precise handling. Includes: (1) Composite Chassis (SWB) Compatibility: Arrma Granite Grom Key Features: Direct OEM replacement – no modifications needed Strong composite construction for durability Maintains stock wheelbase and geometry Lightweight yet tough for performance and longevity Perfect for replacing a worn or damaged chassis so you can get your Grom back on the track and bashing like new.

Read more less

1RC Racing Asphalt Modified 2.0 1/18 Brushless RTR 2WD Oval Racer (Black or Clear)📦 Includes Radio, Battery & Charger🏁 Small Scale. Big Action. Get ready to dominate the oval with the 1RC Racing Asphalt Modified 2.0—a 1/18-scale, brushless-powered beast built for serious fun and competition! Whether you’re new to the sport or an oval veteran, this RTR (Ready-To-Run) racer delivers scale realism, performance, and durability—all in a compact package. 🛠️ Key Features: 🔧 Realistic Tubular Chassis Design — Mirrors full-size asphalt modifieds ⚡ Brushless 8700kV Motor — Speed and torque in a small package 📡 2.4GHz Radio System — Responsive, interference-free control 🚗 Independent Front Suspension — Sharp, agile steering 🛞 Solid Rear Axle & Adjustable Coil-Over Shocks — Tame any oval 🔋 Includes 5-Cell NiMH Battery & Wall Charger 🧰 Ready-to-Run: Transmitter, AA batteries, tuning tools & spares included 🔍 Tech Specs: Scale: 1/18 Drive: 2WD Rear Motor: 8700Kv Brushless Battery: 230mAh 5-Cell NiMH (Included) Length: 9.76 in (248mm) Width: 4.96 in (126mm) Height: 2.56 in (65mm) Wheelbase: 5.9 in (150mm) Weight: 10 oz (283g) 📦 What’s In The Box: (1) 1RC Asphalt Modified 2.0 RTR Racer (1) 2.4GHz Transmitter (1) 5-Cell NiMH Battery (JST Plug) (1) Wall Charger (2) Spare Rear Tires (Soft Compound) (4) AA Transmitter Batteries (1) Set of Tuning Tools (1) Manual 🎨 Needed to Complete: Polycarbonate Paint (if selecting Clear Body version) 🏆 Oval Ready. Pit Proven.From your driveway to your local club race, the 1RC Asphalt Modified 2.0 brings big thrills in a tight little package.

Read more less

🔥 Unleash Maximum Power with Smarter Control!This powerful ESC and motor combo brings advanced sensored brushless performance to your 1/10 4WD truck or monster truck. With IP67 waterproofing, smart start-stop tech, and unmatched control feel, the MAX10 G2 + 3665SD G3 4000kV combo delivers the torque and throttle response to dominate any terrain. ⚙️ ESC Features: 140A continuous / 880A burst current Smart start-stop tech – quieter and more efficient Up to 32° Turbo Timing for max speed Waterproof & dustproof (IP67) Smart Freewheeling = Cooler temps, higher efficiency Real-time data logging & mobile app support (with optional OTA module) High-efficiency BEC: 6V/7.4V @ 5A ⚙️ Motor Specs: Kv Rating: 4000Kv 4-pole sensored brushless motor Size: 3665SD (37mm x 65.8mm) Shaft: 5mm x 16.5mm No-load Current: 8.2A Weight: 304.5g LiPo: 2–3S compatible 📦 Includes: (1) EZRun MAX10 G2 140A ESC (XT60 plug) (1) EZRun 3665SD G3 4000kV Brushless Motor (1) Sensor Cable ✅ Ideal For:1/10 4WD Short Course • Monster Trucks • Heavy Bashers 💪 More power, cooler temps, smarter features. Ready to upgrade? This Hobbywing combo is the gold standard in next-gen brushless performance.

Read more less

Lock in serious traction with the Hot Racing Aluminum Differential Locker Spool for the Arrma Grom lineup. Designed to replace the front or rear diff, this CNC-machined aluminum spool forces both wheels on an axle to rotate together—perfect for crawling, bashing, or low-traction terrain where grip is everything. 🔧 Features: ✅ CNC-machined solid aluminum construction for strength and durability✅ Anodized red finish for corrosion resistance and a sleek look✅ Locks the differential for equal wheel speed and max traction✅ Ideal upgrade for low-traction, off-road environments 📦 Includes: • (1) Aluminum Differential Locker Spool Set 🚗 Compatibility: • Arrma Granite Grom• Arrma Mojave Grom• Arrma Typhon Grom 💡 Note: Recommended for use on loose surfaces. On high-traction terrain, driveline stress may increase.

Read more less

1RC Racing Pre-Mounted 1/18 Super Modified Hoosier Tires (Black) (Soft) – 1RC5567Upgrade your 1/18 Super Modified with these pre-mounted Hoosier tires! Built for scale realism and traction, these tires feature detailed tread, sidewall logos, and sleek black oval-style wheels for that aggressive oval track look. ✔️ Soft compound for maximum grip✔️ Scale tread + Hoosier sidewall detail✔️ Mounted on black oval-style wheels✔️ Designed specifically for 1RC Super Modified 4.0⚠️ *Front wheels do not include bearings (#1RC8503) Includes:• (2) Rear Tires (Soft Compound)• (2) Front Tires (Soft Compound) 🔥 Oval performance that looks as good as it hooks!    

Read more less

1RC Racing 1/18 Asphalt Sprint Car Tires (Black) (Soft) (4) – Front & Rear – 1RC5582 Get your Sprint Car 4.0 race-ready with this set of soft compound 1/18 Asphalt Sprint Car Tires. Designed for use with the Asphalt Sprint Car Conversion Kit, these tires offer optimal grip and scale realism for high-performance oval racing. Features: Soft compound for enhanced traction on asphalt Includes front and rear tires for a complete replacement Compatible with Sprint Car 4.0 running the Asphalt Conversion Kit Sleek black wheels for a clean, classic look Includes: (2) Front Asphalt Sprint Car Tires (2) Rear Asphalt Sprint Car Tires    

Read more less

Boof RC 8AWG Silicone Wire – Black (1 Meter / 3.3 Feet) ⚡ Power Without Compromise. Boof RC 8AWG Black Silicone Wire delivers the strength and flexibility needed for powerful RC setups. Use it when you need maximum flow with a clean, pro-grade look. Ideal for high-current paths and custom wiring solutions. ✅ High-current 8AWG for demanding builds✅ Flexible black silicone insulation for tight installs✅ High-conductivity copper core✅ Solder-friendly and heat-resistant✅ 1 meter (approx. 3.3 feet) 📦 Includes:(1) Meter of Black 8AWG Boof RC Silicone Wire      

Read more less

Boof RC 14AWG Silicone Wire – Red (1 Meter / 3.3 Feet) 🔥 Flexible. Durable. Track-Ready. Boof RC’s 14AWG Red Silicone Wire is perfect for mid-range RC wiring jobs like ESCs, motors, and charge leads. It offers ultra-flexibility, vibrant red color for polarity visibility, and dependable current capacity — all wrapped in a heat-resistant silicone jacket. ✅ 14AWG gauge for RC builds and upgrades✅ Ultra-flexible and easy to route✅ High-strand copper for low resistance✅ Durable red silicone insulation✅ Heat-resistant & easy to solder✅ 1 meter (approx. 3.3 feet) 📦 Includes:(1) Meter of Red 14AWG Boof RC Silicone Wire  

Read more less

Boof RC 10AWG Silicone Wire – Red (1 Meter / 3.3 Feet) 🔥 Power Where It Counts. Boof RC’s 10AWG Red Silicone Wire is built to move serious current while staying cool and flexible. Perfect for custom builds, battery leads, and high-amp RC applications. This vivid red wire helps with clean, color-coded installs that look as sharp as they perform. ✅ 10AWG gauge – high current capacity✅ Ultra-flexible silicone insulation✅ Bright red for clear polarity marking✅ Low-resistance stranded copper core✅ Heat-resistant and easy to solder✅ 1 meter (approx. 3.3 feet) 📦 Includes:(1) Meter of Red 10AWG Boof RC Silicone Wire

Read more less

Team Associated RC10B7 FT Adjustable KPI Set – ASC92479 Fine-Tune Your Front End for Any Track Condition The Factory Team Adjustable KPI (KingPin Inclination) Set gives you race-proven steering geometry flexibility for your RC10B7. Originally featured on prototype models, this advanced tuning option is now available to all racers looking to optimize handling for different surfaces—from low-grip dirt to high-traction clay or carpet. ⚙️ Features: ✅ Precision adjustable KPI set for RC10B7 ✅ Nine distinct KPI settings for optimal tuning range ✅ Includes 3mm and 4mm trailing steering blocks ✅ Enhance corner entry, steering feel, and overall stability ✅ Factory Team engineered for high-level performance 📦 Includes: (2) Adjustable KPI Steering Blocks (1) 3mm Trailing Block Set (1) 4mm Trailing Block Set (Kit Default) Supplement with setup steps and KPI values ✅ Compatibility: RC10B7 🏁 Elevate your steering control and tailor your B7 to any surface with this ultimate front-end tuning kit!

Read more less

  Traxxas X-Maxx Aluminum Stub Axle (Blue) – For Use with TRA7750X HD Driveshaft Upgrade your X-Maxx with this blue-anodized aluminum stub axle, designed specifically for use with the 8S-spec heavy-duty driveshaft (TRA7750X). Built from high-quality aluminum for enhanced durability and performance, this is a direct replacement part for your 8S X-Maxx and adds a custom look with signature Traxxas blue styling. ✅ Features: 🔩 High-strength aluminum construction 🔵 Anodized blue finish for a premium, custom appearance 🛠️ Designed only for use with TRA7750X HD driveshafts 🧰 Direct OEM replacement for 8S X-Maxx models 📦 Includes: (1) Aluminum Stub Axle (Blue) 🔧 Compatibility: ✅ Traxxas X-Maxx (8S) – Model #77086-4 ⚠️ Must be used with TRA7750X Heavy Duty Driveshafts 💪 Built for strength. Styled for performance. Trusted by Traxxas.

Read more less

⚡ Hot Racing Arrma Granite Grom Aluminum Rear Upper Arm Set (Black) ⚡ 💪 Precision-Engineered Strength for Ultimate Performance! 💪 Upgrade your Arrma Granite Grom with the Hot Racing Aluminum Rear Upper Arm Set! These CNC-machined aluminum arms provide next-level durability and rigidity, improving handling, control, and stability for intense off-road action. Whether you're taking on rocky terrain, high-speed runs, or massive jumps, these arms are built to handle it all. 🏆💨 The sleek black anodized finish adds a professional, high-performance look while also providing corrosion resistance, ensuring long-lasting durability no matter where you bash! 🌧️☀️ ✅ Key Features: ✨ CNC-Machined Aluminum Construction – Stronger & more durable than stock plastic arms🛠️ Enhanced Rigidity & Stability – Improved control for high-speed and off-road performance⚡ Anodized Black Finish – Sleek & professional look with added corrosion resistance🔩 Precision-Engineered Fit – Direct replacement for stock components🔧 Includes Steel Pivot Balls & O-Rings – Ensures smooth articulation and easy installation 📦 Includes: ✔️ (1) Left Rear Upper Arm✔️ (1) Right Rear Upper Arm✔️ (2) Steel Pivot Balls✔️ (4) O-Rings 🔗 Compatibility: 🔸 Arrma Granite Grom

Read more less

1RC Racing 1/18 Asphalt Truck Body Set (Clear) 🚗 Convert Your Asphalt Late Model into a High-Performance Asphalt Truck! Transform your 1/18 Asphalt Late Model into an asphalt truck with this official 1RC Racing Asphalt Truck Body Set. Designed as a direct fit for the Asphalt Late Model with the truck conversion, this clear unpainted body lets you create a custom look with your own paint and decals. 🏆 Precision-molded for a seamless fit, this body maintains the aerodynamic performance of the original Late Model while giving your RC truck a new and aggressive racing style. 📦 What’s in the Box? (1) 1/18 Asphalt Truck Body (1) Driver and Helmet 📌 Note: The body arrives clear and unpainted. Painted body shown in photos is for illustrative purposes only. ✅ Compatibility: ✔️ 1RC Racing 1/18 Asphalt Late Model (with Asphalt Truck Conversion) 🔥 Upgrade your Asphalt Late Model into a truck with the 1RC Racing Asphalt Truck Body Set—built for performance, style, and a perfect fit! 🏁🎨  

Read more less

Traxxas XRT Rear Lower BulkheadOEM Replacement for Your XRT Beast Bulkhead Overview:Keep your XRT running strong with the Traxxas Rear Lower Bulkhead—a genuine replacement part designed for a perfect fit and lasting durability. Whether you're repairing after a hard hit or doing preventative maintenance, this is the exact part you need to get back on the throttle. Features: Factory replacement part for easy installation Durable composite construction Designed specifically for the Traxxas XRT platform Includes: (1) Rear Lower Bulkhead Compatibility:  • Traxxas XRT

Read more less

Team Associated RC10B7 Factory Team Steel Universal Driveshaft Set (69mm) – Smoother Power Delivery, Race-Ready Durability! 🚗 Boost your RC10B7 or RC10B7D’s drivetrain performance with the Team Associated Factory Team Steel Universal Driveshaft Set!These 69mm steel universals are specifically designed to reduce mechanical bind, ensuring smoother power transfer, better handling, and improved durability on the toughest tracks. ✨ Key Features: 🔩 Heavy-Duty Steel Construction – Built for maximum strength and long-lasting durability 🔧 Reduces Mechanical Bind – Ensures smoother drivetrain performance and improved cornering 🏁 Optimized for Racing – Helps deliver consistent handling in high-traction and rough conditions 🛡️ Official Factory Team Upgrade – Trusted quality from Team Associated’s championship pedigree 📦 Includes: ✔ (2) 69mm Steel Universal Driveshafts 📦 Compatibility: ✅ Team Associated RC10B7 ✅ Team Associated RC10B7D 📌 Note: 🔹 Direct replacement for stock parts.🔹 Recommended for racers seeking smoother, more efficient drivetrain performance. 🏁 Upgrade your RC10B7 or B7D with the Factory Team Universal Driveshaft Set and drive smoother, faster, and with more confidence! 🔥 Precision-engineered for serious racers by Team Associated! 🔥

Read more less