Traxxas 47mm Front Camber Link Turnbuckles (2) – Part 2444Tighten Up Your Front-End Geometry. The Traxxas 47mm Front Camber Link Turnbuckle Set is a direct replacement for the front camber links on the Traxxas Bandit. These adjustable steel turnbuckles allow you to fine-tune your camber for better cornering, tire contact, and front-end responsiveness. ✅ Designed specifically for the Traxxas Bandit (front suspension)✅ Includes two 47mm steel turnbuckles✅ Smooth-threaded for precise alignment changes✅ Heavy-duty steel construction – reliable and durable✅ Adjustable with a turnbuckle wrench (sold separately) 📦 Includes: (2) 47mm Front Camber Link Turnbuckles Part #: 2444 💡 Pro Tip: Combine with the 36mm rear turnbuckles (Part 2443) for full camber control front and rear.

Read more less

Traxxas 2065R Servo Case & Gaskets Part #: 2063R Keep your Traxxas 2065R servo sealed and secure with this replacement servo case and gasket set. Designed specifically for the 2065R metal-gear waterproof sub-micro servo, this kit restores the waterproof protection and structural integrity of your servo housing. ✅ Features: Direct replacement case and gaskets for the 2065R servo Maintains waterproof seal and internal protection High-precision fit for metal-gear, sub-micro servo design 📦 Includes: (1) Servo Case (1) Gasket Set For use with: Traxxas 2065R sub-micro metal-gear waterproof servo 🛠️ Perfect for maintenance or repair of your 2065R servo—keep it running strong and sealed tight!

Read more less

Traxxas Mini Maxx Assembled Slipper Clutch – Pre-Built & Track-ReadyControlled Power. Built-In Protection. Dial in reliable traction and drivetrain protection with the Traxxas Assembled Slipper Clutch for the Mini Maxx®. This factory-assembled clutch delivers smooth power transfer and guards against drivetrain shock under heavy throttle or hard landings. ✅ Fully pre-assembled – no guesswork, just drop it in✅ Protects drivetrain from shock loads – especially off jumps✅ Improves traction under acceleration✅ Perfect for high-power brushless setups✅ Direct fit for Mini Maxx® 📌 Important Compatibility Notes:Requires additional components to complete install: #10757 – Slipper Shaft #10762 – Spur Gear Assembly 📦 Includes: (1) Complete Assembled Slipper Clutch Fits Mini Maxx® platform 💡 Pro Tip: Pair with hardened driveshafts and upgraded bearings for a bulletproof drivetrain build.  

Read more less

Traxxas Mini Maxx Steel CV Driveshaft Set (4) – Part 10750XUpgrade Your Driveline. Dominate Every Hit. Get race-ready strength and consistent power delivery with the Traxxas Mini Maxx Steel CV Driveshaft Assemblies. Whether you're running front or rear, these heavy-duty constant-velocity shafts are designed to handle brutal torque, big air, and hard landings — without breaking a sweat. ✅ Full set of (4) steel CV driveshafts – for front or rear✅ Pre-assembled for quick install✅ Includes (4) hardened steel drive cups – built to last✅ Also includes (4) screw pins – everything you need✅ Perfect upgrade from stock plastic shafts 📦 Includes: (4) Steel CV Driveshafts (assembled) (4) Steel Drive Cups (4) Screw Pins Part #: 10750X 💡 Pro Tip: Run CVs front and rear for smoother power transfer, tighter steering, and less drivetrain slop.  

Read more less

Traxxas Mini Maxx Rear Shock Tower (Part 10744) – Stronger. Straighter. Smarter. Give your Mini Maxx the support it needs with the Traxxas Rear Shock Tower (10744). Designed to withstand heavy landings and brutal bashing, this direct-replacement part restores the backbone of your rear suspension setup. ✅ Exact fit for Traxxas Mini Maxx✅ OEM durability – molded to handle impacts and flex✅ Pre-drilled for perfect shock alignment✅ Bolt-on design – installs with factory hardware✅ Restores factory geometry & stability 📦 What’s Included: (1) Rear Shock Tower Part #: 10744 💡 Pro Tip: Replace front and rear towers together for balanced suspension performance and long-term reliability.  

Read more less

Traxxas 10743 Aluminum Bellcrank Assembly – Precision Steering. Aluminum Tough.Choose Your Color: Gray, Red, Orange, Blue, or Green Dial in your steering with the Traxxas Aluminum Bellcrank Assembly. CNC-machined from 6061-T6 aluminum and anodized in bold color options, this upgrade gives your steering system pro-level precision, strength, and smooth response under pressure. ✅ CNC 6061-T6 aluminum construction – ultra-rigid, zero-flex feel✅ Anodized in five high-impact colors – Gray, Red, Orange, Blue, Green✅ Includes drag link + full stainless & bearing hardware✅ Pre-threadlocked fasteners – ready to install✅ Dual ball bearing support – buttery-smooth motion 📦 Complete Kit Includes: Aluminum steering bellcranks & drag link (dark titanium finish) (2) 3x13mm SS screws (with threadlock) (2) 3x12mm button-head cap screws (with threadlock) (1) 3x15mm button-head cap screw (with threadlock) (2) 5x8x2.5mm ball bearings (2) 5x10x4mm ball bearings 💡 Pro Tip: Pair with aluminum servo horns and tie rods for a fully upgraded front-end feel.  

Read more less

Traxxas Inner Hardened Steel Upper Suspension Pins (4) – Part 10741XReinforce Your Rig from the Inside Out. These 3x45mm hardened steel inner upper suspension pins are a must-have upgrade for drivers who demand durability under pressure. Designed to hold your suspension geometry tight through punishing landings, hard hits, and high-speed cornering. ✅ Includes 4 hardened steel pins – 3x45mm each✅ Upgrades inner upper suspension link locations✅ Precision-machined for direct fit✅ Won’t bend or flex like stock pins✅ Perfect for high-stress off-road setups 📦 What’s Included: (4) 3x45mm Inner Upper Suspension Pins Part #: 10741X 🔧 Stronger hardware = tighter handling = less downtime.Pair with Traxxas outer pins for a full suspension pin upgrade.  

Read more less

Traxxas Hardened Steel Outer Suspension Pins (8-Pack) – Stay Straight. Stay Strong. Precision Toughness Where It Counts.Upgrade your suspension game with Traxxas Outer Suspension Pins, crafted from hardened steel to handle brutal impacts, hard landings, and aggressive driving — without bending. ✅ Includes 8 pins total – (4) 3x34mm + (4) 3x37mm✅ Hardened steel construction – built to resist bending and wear✅ Exact fit for outer suspension points – easy, direct replacement✅ Ideal for high-impact racing & bashing✅ OEM-grade performance & reliability These pins are perfect for replacing bent stock pins or just beefing up your rig before things get wild. 📦 Includes: (4) 3x34mm hardened steel suspension pins (4) 3x37mm hardened steel suspension pins 💥 Stronger pins = straighter suspension = smoother control.Essential upgrade for high-performance RC setups.

Read more less

Traxxas Front Shock Tower – Engineered to Toughen Your Ride Stiffen Up Your Front End.This Traxxas Front Shock Tower delivers rugged support and precision protection for your RC rig. Designed to withstand intense landings and off-road abuse, it keeps your front shocks aligned and ready for action. ✅ Exact OEM fit – attaches seamlessly to Traxxas chassis✅ Durable material – high-strength plastic resists flex and shock✅ Optimized geometry – supports stable handling and consistent suspension travel✅ Bolt-on installation – simple replacement with stock hardware✅ Ideal for bashers & racers – durable under pressure Why it matters: Prevents shock misalignment for smoother handling Reinforces chassis structure after crashes or upgrades Maintains proper suspension geometry during rough runs 🔧 Installation note: Use existing front shock hardware and mounting holes—no need for modifications.

Read more less

Traxxas X-Maxx/XRT Aluminum Differential Housing Carrier (Requires TRA7783X) Upgrade your drivetrain durability with the Traxxas X-Maxx/XRT Aluminum Differential Housing Carrier. Precision-machined from aluminum, this housing offers increased strength and improved heat dissipation for high-performance 8S setups. It's designed specifically for models equipped with the Torque-Biasing Center Drive and reinforced front/rear differentials. 🔧 NOTE: Requires TRA7783X Spider Gear Shaft & Spacer Set for proper installation. ✅ Features: 🏗️ CNC-machined aluminum for enhanced durability and precision ⚙️ Ideal for high-stress, high-speed 8S bashing and racing 🧊 Improved heat dissipation over stock composite housings 🔩 Designed for use with front/rear diffs and Torque-Biasing Center Drive systems 📦 Includes: (1) Aluminum Differential Housing Carrier 🚗 Compatibility: ✅ Traxxas X-Maxx 8S (#77086-4) ✅ Traxxas XRT 8S 🏁 Stronger. Cooler. Race-Ready. Upgrade your differential housing to aluminum today.

Read more less

Traxxas T-Lock Cable (3XL - 298mm) Keep your rig's locking differentials performing at their best with this genuine Traxxas replacement T-Lock Cable. ✅ Genuine Traxxas Replacement Part✅ Designed for T-Lock Remote Locking Differentials✅ Extra-Long 298mm Cable – 3XL Length✅ Ensures Smooth, Reliable Differential Locking Specifications:• Part Number: TRA8839• Type: T-Lock Cable• Length: 3XL (298mm)• Manufacturer: Traxxas Compatibility:Ideal for models equipped with Traxxas T-Lock remote locking differentials.

Read more less

Traxxas 32P Hardened Steel Pinion Gear (34T, 5mm Bore) – Part #5639⚙️ Built to Handle Brutal Power. The Traxxas 34T Hardened Steel Pinion Gear is designed for serious torque and high-performance applications. Made from tough hardened steel, this 32-pitch gear is perfect for 1/8 and high-power 1/10 scale builds using motors with 5mm shafts. When you need dependable gearing that can take the heat—this is the upgrade. ✅ 32 pitch for high-power drivetrain setups✅ Hardened steel for extreme durability✅ 5mm bore fits most 1/8 brushless motors✅ Ideal for Slash 4X4, E-Revo, and more with 5mm shafts 📦 Includes: (1) 34T Hardened Steel Pinion Gear (1) Set screw

Read more less

📡 Reliable control. Simple operation. The Traxxas TQ 2.4GHz 2-Channel Transmitter is a genuine replacement radio included with most Traxxas RTR models. Featuring dependable 2.4GHz technology, it provides precise control without the interference of older AM or FM systems. Its ergonomic design ensures comfort for all-day driving, while the 2-channel layout makes it simple to operate for beginners and experienced RC drivers alike. ✅ Genuine Traxxas replacement transmitter✅ 2.4GHz technology for interference-free control✅ Ergonomic grip and easy-to-reach controls✅ Factory-paired with compatible Traxxas receivers 📦 Includes:• (1) Traxxas TQ 2.4GHz 2-Channel Transmitter (Transmitter Only)  

Read more less

Restore your body mounting system with this genuine Traxxas replacement set. The TRX-4 Front & Rear Body Mount and Post Set includes everything needed to securely attach your body shell—perfect for repairs, custom builds, or switching body styles. Features:• Direct replacement body mount and post set• Fits Traxxas TRX-4 models• Includes both front and rear mounts Includes:• (1) Front Body Mount & Posts• (1) Rear Body Mount & PostsPart Number: 8215 Keep your body shell secure and trail-ready with OEM-quality fit  

Read more less

⚙️ Durability meets precision. Upgrade your Traxxas Slash 4x4 with the Aluminum Motor Mount Set for maximum strength, heat dissipation, and long-term reliability. CNC-machined from premium aluminum, the 6860R mount resists flex and maintains perfect gear mesh under the toughest driving conditions. ✅ CNC-machined aluminum for strength & precision✅ Enhanced heat dissipation for motor performance✅ Rigid design prevents gear mesh issues✅ Includes all necessary installation hardware✅ Direct drop-in fit for Traxxas Slash 4x4 📦 Includes:• Aluminum Motor Mount (Red Anodized)• Mounting Hardware

Read more less

🔧 Strong. Reliable. Ready for action. The Traxxas 6860A Motor Mount is a factory replacement part built to keep your drivetrain solid and secure. Made from durable materials and designed for precision fitment, it ensures your motor stays aligned under intense off-road action. ✅ Direct factory replacement for easy install✅ Maintains perfect gear mesh and alignment✅ Durable construction for long-lasting performance✅ Includes all necessary installation hardware✅ Compatible with multiple 4x4 Traxxas models 📦 Includes:• Motor Mount• Mounting Hardware Compatibility: Traxxas Slash 4x4 Traxxas Hoss Traxxas Telluride 4x4 Traxxas Stampede 4x4

Read more less

⚡ Stock replacement motor for dependable performance. The Traxxas 7075 Titan 380 Brushed Motor (18-Turn) is a direct replacement for select Traxxas models, delivering smooth, consistent power in a compact design. Featuring an internal cooling fan for longer runtimes and improved durability, this motor is built to keep your RC running strong during high-action fun. ✅ Genuine Traxxas replacement part✅ 18-turn design for balanced speed & torque✅ Pre-installed bullet connectors for easy install✅ Integrated cooling fan for extended life 📦 Includes:• (1) Traxxas Titan 380 Brushed Motor (18T) Compatibility: Traxxas 1/16 E-Revo VXL & Brushed Traxxas 1/16 Summit Traxxas 1/16 Slash Traxxas 1/16 Rally

Read more less

  Traxxas Velineon 540XL Motor Heat Sink – Part #3458🔥 Cooler Temps. Hotter Performance. Keep your Velineon 540XL motor running cooler under pressure with this precision-fit aluminum heat sink from Traxxas. Designed specifically for the Velineon XL brushless motors (TRX3351R and TRX3461) when installed in 4X4 vehicles, this heat sink helps dissipate heat efficiently—keeping performance consistent and motor life long. ✅ Direct fit for Velineon XL motors in 4X4 platforms✅ Helps prevent thermal shutdowns✅ Improves overall motor efficiency✅ Durable aluminum construction❌ Not compatible with 2WD models 📦 Includes: (1) Aluminum Motor Heat Sink 💡 Pro Tip: Pair with a cooling fan for maximum performance during high-load runs or hot weather conditions.

Read more less

Traxxas 36mm Camber Link Turnbuckles (2) – Part 2443Fine-Tune Your Ride Height & Camber. This replacement camber link turnbuckle set includes two 36mm steel turnbuckles, designed specifically for the Traxxas Bandit. Easily adjust your rear camber angle to improve handling, cornering grip, and tire wear. ✅ Direct fit for Traxxas Bandit✅ Includes two 36mm steel turnbuckles✅ Precision threads for smooth adjustment✅ Strong steel construction – durable and race-tested✅ Adjustable with a turnbuckle wrench (sold separately) 📦 Includes: (2) 36mm Camber Link Turnbuckles Part #: 2443 💡 Pro Tip: Pair with upgraded rod ends or toe links for full tuning flexibility and improved suspension geometry.

Read more less

Built for brutal 8S power, the Traxxas 11T Heavy Duty Rear Pinion Gear is a direct replacement for the X-Maxx and XRT. Designed to pair with the 35T Heavy Duty Ring Gear (#7792), this gear delivers the strength and durability needed to keep you bashing harder and longer. Features:• Heavy-duty 11-tooth rear differential pinion gear• Designed for use with 35T ring gear (#7792)• Reinforced for extreme 8S power• Perfect fit for high-stress drivetrain setups Compatibility:• Traxxas X-Maxx• Traxxas XRT Includes:• (1) 11T Rear Pinion GearPart Number: 7791 Upgrade your rear diff and stay in the fight with genuine Traxxas strength.  

Read more less

  Keep your suspension strong and your axles supported with this pair of genuine Traxxas stub axle carriers. Designed to mount to the rear control arms, these carriers provide reliable support for the rear axles and are a perfect fit for a wide range of Traxxas vehicles. Features: Direct replacement for worn or damaged rear stub axle carriers Mounts to rear control arms Supports rear axles for smooth performance Made by Traxxas for perfect factory fit Includes:(2) Stub Axle Carriers Compatibility:Fits a variety of Traxxas models – be sure to check your manual for part compatibility.

Read more less

Keep your RC running smooth and efficient with this pair of Traxxas 6x13x5mm Ball Bearings. Designed as direct replacements, these high-quality bearings reduce friction and improve performance wherever they’re used. 🛠️ Features: Genuine Traxxas replacement part Precision 6x13x5mm ball bearings Helps maintain smooth and reliable drivetrain operation Perfect for maintenance or upgrades Includes:(2) 6x13x5mm Ball Bearings A simple upgrade that makes a big difference in durability and speed—don’t hit the track without them!

Read more less

  Overview:Upgrade your suspension performance with the Traxxas GTR Assembled Shocks. Known for their silky-smooth action and race-inspired design, these shocks come fully assembled and pre-filled with shock oil, making installation fast and easy. Built from high-quality materials, they deliver consistent damping and long-lasting durability. Note: springs are not included, allowing you to select the perfect spring rate for your setup. Features: (2) Pre-assembled GTR shocks with oil Springs not included (sold separately for tuning flexibility) Aluminum bodies with PTFE-coated bores for ultra-smooth action Precision machined components for consistent performance Genuine Traxxas factory upgrade/replacement Compatibility: Traxxas Revo 3.3 Traxxas E-Revo Traxxas Summit Traxxas Slayer Pro 4x4 Other Traxxas models equipped with GTR shocks (check your manual) Includes: (2) GTR Assembled Shocks (oil-filled, no springs) Part Number: 5460

Read more less

Traxxas TRX-4M Shock Springs (0.095 Rate) – Part #9758💪 Stiffer Response. More Control. Tackle tougher terrain with confidence using these 0.095 rate shock springs for the TRX-4M. Designed for GTM shocks, this stiffer spring setup offers improved load handling and reduced body roll—perfect for heavier rigs or aggressive driving conditions. ✅ Fits 1/18 TRX-4M GTM shocks✅ Firm spring rate (0.095) for added support and sharper response✅ Ideal for overland builds, trail accessories, or added weight✅ Durable steel construction✅ Genuine Traxxas quality 📦 Includes: (2) GTM Shock Springs (0.095 rate) 💡 Pro Tip: Combine with shock oil tuning and tire choice for a fully custom suspension setup.

Read more less

Traxxas TRX-4M Shock Springs (0.072 Rate) – Part #9757🌀 Fine-Tuned Flex. Trail-Tested Feel. Upgrade your suspension performance with these 0.072 rate shock springs for the 1/18-scale TRX-4M. Whether you're dialing in your crawler for a specific terrain or replacing worn-out springs, these GTM shock springs offer a factory fit with refined damping response for smoother articulation. ✅ Fits TRX-4M GTM shocks✅ Medium spring rate (0.072) for balanced performance✅ Great for general trail use and technical crawling✅ Durable steel construction✅ Genuine Traxxas replacement part 📦 Includes: (2) GTM Shock Springs (0.072 rate) 💡 Pro Tip: Match spring rates across axles to maintain balanced handling and reduce torque twist on uneven surfaces.  

Read more less

Traxxas TRX-4M Front & Rear Axle Housings w/Servo Mount & Steering Horn – Part #9741🔧 OEM Fit. Compact Power. Built for the 1/18 Trail. Keep your 1/18-scale TRX-4M in top shape with this genuine Traxxas axle housing set. Designed specifically for the TRX-4M platform, this kit includes both front and rear axle housings, a steering servo mount, and a factory-style servo horn—everything you need for a smooth steering and suspension rebuild. ✅ Direct fit for TRX-4M 1/18 scale crawlers✅ Includes both front and rear axle housings✅ Comes with servo mount and steering servo horn✅ Durable composite construction✅ Genuine Traxxas quality for perfect compatibility 📦 Includes: (1) Front Axle Housing (1) Rear Axle Housing (1) Steering Servo Mount (1) Servo Horn 💡 Pro Tip: Pair with fresh rod ends and a metal servo upgrade for tighter steering and better durability on tough trails.

Read more less

  Keep your 1/18-scale TRX-4M protected and trail-ready with this genuine Traxxas Center Skidplate and Bumper Mount Set. This set includes the center skidplate, front bumper mount, and rear bumper mount—all precision-molded to deliver reliable fit and durability for your mini crawler. Features:• Replacement center skidplate for TRX-4M• Includes front and rear bumper mounts• Durable molded construction• Designed specifically for the 1/18-scale TRX-4M Includes:• (1) Center Skidplate• (1) Front Bumper Mount• (1) Rear Bumper MountPart Number: 9736 Genuine Traxxas parts to keep your TRX-4M crawling strong and protected.

Read more less

Traxxas 2065T Sub-Micro Waterproof ServoPart #: 2065T Compact Size. Tough Inside.Designed as a direct replacement for the TRX-4M, the Traxxas 2065T packs reliable power into a sub-micro footprint. Featuring a metal main gear, this waterproof servo brings enhanced durability and precision control to your micro rig—built to handle tight turns and tough terrain with ease. Features: Waterproof design for all-weather performance Metal main gear for added strength and longevity Perfect fit for TRX-4M and other sub-micro servo applications Plug-and-play replacement – no modifications needed Includes: (1) Traxxas 2065T Sub-Micro Waterproof Servo Upgrade your TRX-4M with confidence—compact, tough, and ready for the trail.

Read more less

Traxxas Front Shock Tower – Part 6839Reinforce Your Front End. Built to Take Hits. The Traxxas Front Shock Tower (6839) is a direct replacement part for the Slash 4X4 and related models. It mounts securely to the front bulkhead and provides stable upper mounting points for the front shocks, ensuring precise suspension performance and durability. ✅ OEM replacement part – designed specifically for Slash 4X4✅ Strong composite construction – lightweight yet impact-resistant✅ Pre-molded mounting holes – easy bolt-on install✅ Restores proper shock alignment and support✅ Compatible with stock hardware and body mounts 📦 Includes: (1) Front Shock Tower Part #: 6839 Fits: Traxxas Slash 4X4 Slash 4X4 VXL Slash 4X4 Ultimate Stampede 4X4 Rally VXL Telluride 💡 Pro Tip: Replace both front and rear towers together to ensure balanced suspension geometry and consistent handling.    

Read more less

  Keep those front wheels in check with the Traxxas Maxx Wheelie Bar! Designed as an optional upgrade for the Traxxas Maxx, this durable wheelie bar helps control wild launches and hard acceleration. It comes pre-assembled with wheels and is available in multiple color options to match your ride. Note: Mounting hardware is not included. Features:• Optional wheelie bar for Traxxas Maxx• Pre-assembled with wheels for easy setup• Helps control wheelies and improves stability• Available in multiple color options (sold separately)• Mounting hardware required (not included) Includes:• (1) Pre-Assembled Wheelie BarPart Number: 8976 Control the power and ride the wheelies in style—Traxxas tough, Maxx ready.

Read more less

  Overview:Add strength and style to your build with the Traxxas 5mm Aluminum Flanged Nylon Locking Nuts. Machined from lightweight aluminum and equipped with nylon inserts, these locknuts stay tight under vibration and high loads while reducing rotating mass. Available in four bold anodized colors, they’re a perfect mix of performance and looks. Features: Set of 4 flanged M5 locknuts Machined from durable, lightweight aluminum Nylon insert for secure, vibration-resistant fit Flanged design distributes load for better holding power Available in Blue, Red, Green, or Black anodized finishes Genuine Traxxas factory hardware Compatibility: Fits Traxxas models using 5mm wheel nuts, including: X-Maxx Maxx E-Revo VXL Brushless E-Revo 2.0 XO-1 Other Traxxas vehicles requiring 5mm locknuts (check manual) Includes: (4) 5mm Aluminum Flanged Nylon Locking Nuts – selected color Part Number: 8447

Read more less

RPM Hybrid Gearbox Housing & Rear Mounts (Black)PART #: RPM73612 Upgrade your Traxxas 2WD vehicle with the RPM Hybrid Gearbox Housing and Rear Mounts — engineered for unmatched strength, heat dissipation, and long-term durability. This hybrid setup combines a CNC-machined aluminum motor plate with RPM’s signature ultra-tough molded nylon housing and rear mounts, delivering a rugged solution for racers and bashers alike. Fits: Traxxas Slash 2WD Traxxas Rustler 2WD Traxxas Bandit Traxxas Stampede 2WD Key Features:Aluminum Motor Plate: 3mm thick 6061 T6 aluminum plate Locks in gear mesh for consistent settings Helps dissipate motor heat Not integrated into bumper mounts — no flex on rear impacts Molded Gearbox Housing: Made from RPM’s bulletproof nylon blend Fully enclosed design keeps debris out Compatible with stock motor cover Eliminates bottom hole from stock housing for cleaner internals Quieter operation than stock Rear Mounts (0° and 3° Included): Two sets of rear mounts included: 0° and 3° toe-in Easily serviceable—no need to remove the entire transmission Molded for tight tolerances with minimal suspension slop What’s Included: Hybrid gearbox housing 0° and 3° rear A-arm mounts 3mm aluminum motor plate Mounting hardware and instructions Tech Notes: Internal transmission components (gears, bearings, shafts) not included — transfer these from your stock setup. Replaces Traxxas #3691 and #3691A. Minor trimming of stock A-arms may be needed; no issues with RPM rear arms.

Read more less

  Traxxas Jato/Slayer Heavy Duty Rod Ends (8) – Part #5525R💪 Built Stronger. Ready for More. Upgrade your rig with the Traxxas 5525R Heavy Duty Rod Ends. Designed specifically for the Jato and Slayer, these rod ends offer increased durability for high-impact conditions and can also be used as a stronger alternative to standard TRA5525 ends in a variety of Traxxas vehicles. ✅ Heavy-duty construction for added strength✅ Compatible with Jato, Slayer, and other models using TRA5525 ends✅ Direct fit with no modifications required✅ Ideal upgrade for high-stress suspension or steering components❌ Note: Pillow balls not included 📦 Includes: (8) Heavy Duty Rod Ends COMPATIBILITY: Traxxas Jato Traxxas Rustler Traxxas Slash Traxxas Stampede

Read more less

  Keep your servo running like new with this genuine replacement gear set for the Traxxas 2080 Micro Waterproof Servo. Whether you're repairing worn or stripped gears, this kit is the perfect fix to restore smooth and precise performance. 🔧 Features: Direct replacement for Traxxas 2080 micro waterproof servo Includes all internal gears needed for a full rebuild Maintains waterproof integrity when used with proper installation Made from durable materials for long-lasting performance 📦 Includes: Complete internal gear set for the 2080 servo Don’t let stripped gears slow you down—refresh your servo and get back on track!

Read more less

Keep your steering sharp and responsive with this genuine Traxxas replacement servo horn and linkage set for the Maxx 1/10 Brushless Monster Truck. Whether you're upgrading or replacing worn components, this factory-assembled set ensures a precise fit and reliable performance. 🔧 Features: Direct replacement for stock Maxx components Factory-assembled 46mm linkage rod for hassle-free installation Designed to maintain smooth, accurate steering response 📦 Includes: (1) Servo Horn (1) 46mm Linkage Rod (pre-assembled) A must-have spare for every Maxx owner—stay ready for action with dependable OEM parts from Traxxas.

Read more less

Keep your Maxx tough where it counts! The Traxxas 8926 Front Bulkhead Tie Bar is a direct replacement part designed to reinforce the front end of your Maxx 1/10 Brushless Monster Truck. Made from strong steel, this set includes one upper and two lower tie bars to help maintain chassis strength during heavy-duty action. 🔩 Features: Genuine Traxxas replacement part Durable steel construction for added strength Helps prevent bulkhead flex and damage under hard impacts Precision fit for the Traxxas Maxx 1/10 Brushless Monster Truck 📦 Includes: (1) Upper Steel Tie Bar (2) Lower Steel Tie Bars Built for bashing? Keep your Maxx together with this must-have front-end reinforcement!

Read more less