Upgrade the durability and style of your monster truck with the Traxxas Aluminum Wheel Hex Hub Set (7756). Designed for the Traxxas X-Maxx, these aluminum hex hubs replace the stock plastic versions with stronger aluminum alloy construction for improved reliability during hard bashing and high-power runs. The precision-machined aluminum design provides a more secure wheel connection while helping prevent rounding or wear that can occur with plastic hexes. Finished in anodized coating, these hubs also add a bold custom look to your X-Maxx build. Features• Aluminum alloy construction for increased strength• Replaces stock plastic wheel hex hubs• Anodized finish for durability and style• Helps improve wheel mounting reliability• Perfect upgrade for high-power X-Maxx setups Compatibility• Traxxas X-Maxx Includes• (4) Aluminum Wheel Hex Hubs   

Read more less

Keep your drivetrain running smooth with the Traxxas 68-Tooth Spur Gear, a direct replacement designed to restore performance and reliability. ⚙️ Smooth Power Transfer The spur gear is a critical part of your drivetrain, and this 68T configuration helps: Deliver consistent power from motor to drivetrainMaintain proper gear meshEnsure efficient acceleration and runtime🛠️ Durable ReplacementGenuine Traxxas OEM partBuilt for long-lasting performanceIdeal for replacing worn or damaged spur gears Perfect for getting your truck back on the road quickly and reliably. ⚡ Features68-tooth spur gearDirect replacement partEnsures smooth drivetrain operationDurable constructionEasy installation📦 Includes(1) 68T Spur Gear🔧 CompatibilityTraxxas E-MaxxFits other Traxxas models using 68T spur gears (check your setup for compatibility) A simple but essential part to keep your RC running smooth, efficient, and ready for action.

Read more less

RPM Hybrid Gearbox Housing & Rear Mounts (Black)PART #: RPM73612 Upgrade your Traxxas 2WD vehicle with the RPM Hybrid Gearbox Housing and Rear Mounts — engineered for unmatched strength, heat dissipation, and long-term durability. This hybrid setup combines a CNC-machined aluminum motor plate with RPM’s signature ultra-tough molded nylon housing and rear mounts, delivering a rugged solution for racers and bashers alike. Fits: Traxxas Slash 2WD Traxxas Rustler 2WD Traxxas Bandit Traxxas Stampede 2WD Key Features:Aluminum Motor Plate: 3mm thick 6061 T6 aluminum plate Locks in gear mesh for consistent settings Helps dissipate motor heat Not integrated into bumper mounts — no flex on rear impacts Molded Gearbox Housing: Made from RPM’s bulletproof nylon blend Fully enclosed design keeps debris out Compatible with stock motor cover Eliminates bottom hole from stock housing for cleaner internals Quieter operation than stock Rear Mounts (0° and 3° Included): Two sets of rear mounts included: 0° and 3° toe-in Easily serviceable—no need to remove the entire transmission Molded for tight tolerances with minimal suspension slop What’s Included: Hybrid gearbox housing 0° and 3° rear A-arm mounts 3mm aluminum motor plate Mounting hardware and instructions Tech Notes: Internal transmission components (gears, bearings, shafts) not included — transfer these from your stock setup. Replaces Traxxas #3691 and #3691A. Minor trimming of stock A-arms may be needed; no issues with RPM rear arms.

Read more less

  Chassis Overview:This is a replacement chassis designed for the Traxxas Slash 4x4. It serves as the main structural foundation, keeping all components aligned and securely mounted. 🔧 Key Features ✔ Replacement chassis✔ Durable construction✔ Maintains proper vehicle alignment✔ Direct fit design 📦 Includes (1) Chassis 🚗 Compatibility Traxxas Slash 4x4 Ideal for replacing a damaged chassis, this part helps restore strength, alignment, and overall performance.  

Read more less

  Keep your servo running like new with this genuine replacement gear set for the Traxxas 2080 Micro Waterproof Servo. Whether you're repairing worn or stripped gears, this kit is the perfect fix to restore smooth and precise performance. 🔧 Features: Direct replacement for Traxxas 2080 micro waterproof servo Includes all internal gears needed for a full rebuild Maintains waterproof integrity when used with proper installation Made from durable materials for long-lasting performance 📦 Includes: Complete internal gear set for the 2080 servo Don’t let stripped gears slow you down—refresh your servo and get back on track!

Read more less

Keep your steering sharp and responsive with this genuine Traxxas replacement servo horn and linkage set for the Maxx 1/10 Brushless Monster Truck. Whether you're upgrading or replacing worn components, this factory-assembled set ensures a precise fit and reliable performance. 🔧 Features: Direct replacement for stock Maxx components Factory-assembled 46mm linkage rod for hassle-free installation Designed to maintain smooth, accurate steering response 📦 Includes: (1) Servo Horn (1) 46mm Linkage Rod (pre-assembled) A must-have spare for every Maxx owner—stay ready for action with dependable OEM parts from Traxxas.

Read more less

Keep your Maxx tough where it counts! The Traxxas 8926 Front Bulkhead Tie Bar is a direct replacement part designed to reinforce the front end of your Maxx 1/10 Brushless Monster Truck. Made from strong steel, this set includes one upper and two lower tie bars to help maintain chassis strength during heavy-duty action. 🔩 Features: Genuine Traxxas replacement part Durable steel construction for added strength Helps prevent bulkhead flex and damage under hard impacts Precision fit for the Traxxas Maxx 1/10 Brushless Monster Truck 📦 Includes: (1) Upper Steel Tie Bar (2) Lower Steel Tie Bars Built for bashing? Keep your Maxx together with this must-have front-end reinforcement!

Read more less

  Bulkhead Overview:This is a replacement front bulkhead designed for the Traxxas 4-Tec 2.0 platform. It restores structural support to the front end and ensures proper alignment of suspension and drivetrain components. 🔧 Key Features Replacement front bulkhead Maintains chassis integrity and alignment Direct fit Traxxas part 📦 Includes (1) Front Bulkhead 🚗 Compatibility Traxxas 4-Tec 2.0 Ideal for replacing worn or damaged components, this bulkhead helps keep your 4-Tec 2.0 running straight and performing as intended.

Read more less

  Keep your X-Maxx running strong with the Traxxas Steel Bulkhead Tie Bar Set. Designed as a direct replacement for stock components, this set reinforces the front and rear bulkheads for improved durability under extreme bashing conditions. Built from hardened steel, these tie bars help maintain chassis alignment and structural rigidity during high-load impacts and big-air landings. Features: ✔️ Genuine Traxxas replacement part✔️ Hardened steel construction for maximum strength✔️ Reinforces bulkheads and improves overall durability✔️ Direct fit for simple installation Includes: (1) Upper Steel Tie Bar (2) Lower Steel Tie Bars Compatibility: Traxxas X-Maxx

Read more less

  Traxxas Rustler 4X4 Front Bulkhead. Package includes replacement front bulkhead. COMPATIBILITY: Traxxas Rustler 4x4

Read more less

The Traxxas 7430R Long Chassis Front Bulkhead is a direct replacement part designed for Rustler 4X4 and Rustler 4X4 VXL models equipped with the optional extended chassis (TRA6723R). Built for durability and precision fit, it’s a must-have when upgrading or repairing your long wheelbase setup. Features:• Replacement front bulkhead for long chassis setups• Compatible with Rustler 4X4 and 4X4 VXL• Designed for use with optional TRA6723R extended chassis Includes:• (1) Long Chassis Front BulkheadPart Number: 7430R Keep your extended Rustler 4X4 performing at its best with genuine Traxxas parts.

Read more less

Traxxas Shock Caps & Bottoms (2)Part #: 3767 Refresh your suspension setup with this set of replacement shock caps and bottoms from Traxxas. Designed for reliability and a perfect fit, these components help restore smooth shock performance on a variety of Traxxas vehicles. Features: Genuine Traxxas replacement parts Ideal for routine maintenance or repair Durable plastic construction Compatible with Traxxas Ultra Shocks Includes: (2) Shock Caps (2) Shock Bottoms

Read more less

Gear Overview:This is a replacement rear portal drive input gear designed to keep your Traxxas TRX-4 or TRX-6 drivetrain running smoothly. It transfers power through the portal system, helping maintain proper performance and reliability. 🔧 Key Features Replacement rear portal drive input gear Maintains drivetrain performance Direct fit Traxxas part 📦 Includes (1) Rear Portal Drive Input Gear 🚗 Compatibility Traxxas TRX-4 Traxxas TRX-6 Perfect for replacing worn or damaged gears, this component helps keep your portal drivetrain operating smoothly and reliably.  

Read more less

  Restore smooth power delivery to your TRX-4’s front axle with this genuine Traxxas Portal Drive Input Gear set. This kit includes the front portal input gear, drive pin, and cross pin—everything you need for a quick and reliable repair. Features:• Replacement front portal drive input gear• Includes drive pin and cross pin• Precision-engineered for TRX-4 portal axle systems• Durable steel construction for trail-tough performance Includes:• (1) Front Portal Drive Input Gear• (1) Drive Pin• (1) Cross PinPart Number: 8257 Genuine Traxxas parts for dependable fit, function, and durability on the toughest trails.

Read more less

Overview:Upgrade your drivetrain with the Traxxas Spiral Cut Differential Ring & Pinion Gear Set (Front). Precision-machined from hardened steel, this gear set provides maximum durability, smoother power transfer, and reduced slop under high loads. The spiral cut design ensures quieter operation and improved efficiency compared to straight-cut gears, making it a must-have upgrade for high-performance Traxxas builds. Features: Spiral cut design for smoother and quieter operation Hardened steel construction for maximum strength and wear resistance Provides precise gear mesh and improved durability under extreme power Genuine Traxxas factory upgrade part Compatibility (Front Differential): Traxxas Revo 3.3 Traxxas E-Revo Traxxas E-Revo Brushless Traxxas Summit Traxxas E-Maxx Brushless Traxxas T-Maxx 3.3 Includes: (1) Spiral Cut Ring Gear (1) Spiral Cut Pinion Gear Part Number: 5379R

Read more less

Conquer the toughest terrain with Traxxas 2.2" Canyon Trail Crawler Tires. These aggressive, high-traction tires are designed to provide maximum grip on rocks, dirt, and trails. Perfect for your TRX-4 or any 2.2" crawler build, they come complete with foam inserts for optimal support and performance. Features:• Aggressive tread pattern for ultimate off-road traction• 2.2" size fits standard crawler wheels• Includes foam inserts for enhanced support• Perfect for TRX-4 and other 1/10-scale crawlers Includes:• (2) 2.2" Canyon Trail Crawler Tires• (2) Foam InsertsPart Number: 8170 Tackle any trail with confidence—built tough for serious crawling.  

Read more less

This is the Traxxas XL-5HV 3S Waterproof Electronic Speed Control. HV stands for compatibility with the high voltage 3S LiPo battery packs for greater efficiency and power. In addition to the three standard profiles (Sport, Race and Training Mode), the XL-5 HV features a Trail profile that serves up a little bit of drag brake for smooth intuitive driving for most of your adventures. A new Crawl profile introduces hill hold and instant reverse for extremely technical courses. Either will help you navigate the trail with ease. COMPATIBILITY: TRX-4

Read more less

Get the performance and reliability you expect from Traxxas with the 5800mAh Power Cell 2S LiPo—a perfect balance of power, runtime, and safety for your Traxxas vehicle. 🔋 7.4V / 5800mAh / 25C Continuous Discharge🔌 Exclusive Traxxas iD Connector for simple, safe charging⚡ Max Burst Rate: 50C (290A)💪 Hard-wired 12AWG Maxx Cable for low resistance🏁 Designed for a perfect fit in Traxxas vehicles Dimensions: 137x25x43mmWeight: 308g ⚠️ Requires Traxxas iD charger only. Do not charge with any non-Traxxas charger. Boost your bash time with dependable power, rugged construction, and high-output delivery—Traxxas style.

Read more less

Traxxas Titan 550 Size Motor (12T) – Part #3785🔥 Big Power. Bold Performance. The Traxxas Titan 12T 550 Brushed Motor delivers massive torque and reliable performance for your RC adventures. Whether you're tearing up trails or bashing in the backyard, this motor is built to handle the heat—literally—with an integrated cooling fan that helps extend run times and reduce wear. A perfect drop-in replacement for Traxxas models using a 12-turn brushed motor. ✅ High-torque 550 size brushed motor✅ 12-turn design for powerful acceleration✅ Built-in cooling fan for longer run times✅ Factory-installed leads for easy installation✅ Ideal replacement for many Traxxas 1/10 scale vehicles 📦 Includes: (1) Titan 550 12T Brushed Motor 💡 Pro Tip: For best results, pair with the Traxxas XL-5 ESC and a properly geared transmission to balance speed and runtime.  

Read more less

  Traxxas 2075R Digital High Speed Waterproof ServoPart #: 2075R Fast. Responsive. Waterproof.The Traxxas 2075R delivers lightning-fast steering with waterproof protection – perfect for high-performance builds that demand precision and durability. Whether you're carving corners or bashing through puddles, this servo responds with consistent speed and control. Features: High-speed performance with digital precision Fully waterproof design for all-weather action Drop-in fit for most 1/10 scale Traxxas vehicles Smooth operation for confident handling at any speed Includes: (1) Traxxas 2075R Digital High Speed Waterproof Servo Need sharper response from your steering?The 2075R gets you there—fast.

Read more less

Traxxas Power Cell 6-Cell Stick NiMH Battery Pack w/ iD Connector (7.2V/3000mAh)📦 Part #: TRA2922X Power your Traxxas vehicle with confidence using the Traxxas Power Cell 6-Cell 3000mAh Stick NiMH Battery Pack. Designed for peak performance and long run times, this pack features the Traxxas iD connector for simple, safe, and foolproof charging every time. ⚙️ Features: 🔌 Traxxas iD High-Current Connector for maximum efficiency and compatibility with iD chargers 🔋 3000mAh Capacity delivers increased runtime and higher sustained voltage 🧵 12-Gauge MAXX Cable Wire with flexible silicone insulation for durability and heat resistance 🔩 Gold-Plated Copper Terminals minimize resistance and support high current loads ✅ Compatible with all Traxxas vehicles that use a 6-cell stick pack Pair this battery with a Traxxas EZ-Peak iD Charger for the safest and most user-friendly charging experience. Ideal for upgrading from stock packs or keeping a backup ready to go!

Read more less

  Unleash the full potential of your Traxxas vehicle with the Velineon Brushless Power System! This combo includes the VXL-3S ESC and 3500kV Velineon brushless motor, delivering extreme power, efficiency, and speed—while staying fully waterproof for all-weather fun. Perfect for bashing, racing, or upgrading your stock system, this combo provides the seamless blend of brutal acceleration and bulletproof reliability that Traxxas is known for. Features: Includes VXL-3S ESC + Velineon 3500kV Brushless Motor Waterproof design for worry-free driving in mud, snow, and water 3S LiPo capable for insane speeds (50+ mph in many Traxxas vehicles) Efficient brushless technology = faster, cooler, and longer runtimes Traxxas High-Current Connectors pre-installed Includes: (1) Traxxas VXL-3S Waterproof ESC (1) Traxxas Velineon 3500kV Brushless Motor Compatibility:Direct fit upgrade for many Traxxas vehicles, including Rustler, Bandit, Stampede, Slash, and more.

Read more less

Smooth. Strong. Stunning.Upgrade your Traxxas Mini Maxx® with precision-engineered GTR PTFE Aluminum Long Shocks — delivering race-level performance, silky-smooth damping, and a bold anodized finish that looks as good as it performs. Engineered for Ultimate ControlEach shock features a hard-anodized aluminum body with a PTFE coating to minimize friction and deliver consistent damping. Oversized bores hold more oil for stable performance on rough terrain, while Titanium Nitride (TiN)-coated shafts ensure ultra-smooth movement and long-term durability. With threaded bodies and adjustable collars, tuning ride height and spring preload is effortless. X-ring seals keep dirt out, and clamping-style retainers keep the springs locked in place, even during extreme bashing. 💪 Features: Hard-anodized aluminum shock bodies PTFE coating for ultra-low friction damping TiN-coated shafts for smooth, wear-resistant performance Large-bore design holds more shock oil Threaded bodies for easy ride-height adjustment X-ring seals keep dirt and debris out Clamping retainers prevent spring pop-off Pre-assembled with oil and springs included Available in Gray, Orange, Blue, Green, or Red 📦 Includes: (4) Mini Maxx® GTR PTFE Aluminum Long Shocks      

Read more less

Traxxas WideMaxx Driveshaft Assembly (1) – Part 8996TExtended Reach. Maxx Duty Strength. The Traxxas 8996T Driveshaft Assembly is a fully assembled Maxx® Duty driveshaft designed specifically for use with the #8995 WideMaxx™ Suspension Kit. Built to handle extreme power and rough terrain, it’s perfect for replacing or upgrading a front or rear shaft on your widened Maxx. ✅ Fits front or rear – left or right side✅ Extended length for WideMaxx suspension setup (#8995)✅ Maxx Duty design – built for brushless performance✅ Fully assembled and ready to install✅ Includes screw pin for secure mounting 📦 Includes: (1) Maxx Duty Driveshaft Assembly (for WideMaxx) (1) Screw Pin Part #: 8996T Note: For use only with Traxxas #8995 WideMaxx™ Suspension Kit 💡 Pro Tip: Swap all four shafts at once with WideMaxx-specific driveshafts for a balanced, bombproof drivetrain.  

Read more less

⚙️ Smooth power. Built-in protection. The Traxxas Complete Slipper Clutch is a ready-to-install assembly designed for the Slash 4x4. It helps protect your drivetrain by allowing controlled slip under heavy load, reducing wear on gears and providing smoother power delivery. Perfect for maintenance, repairs, or as a spare for quick swaps at the track or in the field. ✅ Genuine Traxxas replacement part✅ Fully assembled for easy installation✅ Protects drivetrain from excessive shock loads✅ Restores smooth acceleration and control 📦 Includes:• (1) Complete Slipper Clutch Assembly for Slash 4x4  

Read more less

Strengthen your rear end with the Traxxas HD Extreme Rear Stub Axle Carriers. Built for durability, these heavy-duty carriers are a direct fit for popular Traxxas 2WD platforms including the Rustler®, Bandit®, Slash®, Bigfoot® No. 1, Drag Slash®, and Stampede®. Whether you're bashing off-road or tearing up the track, these carriers deliver long-lasting performance and rugged support for your rear axle assembly. Perfect as replacements for worn parts or upgrades from stock components, they’re also a direct match for the Traxxas 2WD Extreme Heavy Duty Upgrade Kits (TRA9180–9182-series). Features:• Heavy-duty rear stub axle carriers for extra durability• Fits Rustler®, Bandit®, Slash®, Stampede®, Bigfoot® No. 1, Drag Slash®, and Slash Modified• Compatible with aluminum and standard Traxxas components• Works as a direct replacement for TRA9180, TRA9181, and TRA9182 kits• Available in multiple colors for custom styling Includes:• (1) Left Rear Stub Axle Carrier• (1) Right Rear Stub Axle Carrier• (2) 3x31mm Hinge Pins• (2) 3x18mm ScrewsPart Number: 9150 Hit harder, drive longer—these HD carriers are built to handle serious action.

Read more less

⚙️ Smoother Power. Stronger Drivetrain. Built for Abuse. Upgrade your Traxxas Mini Maxx drivetrain with the Hot Racing Steel Helical Front Differential Gear Set. Designed with precision-machined helical spiral-cut gears, this heavy-duty upgrade delivers smoother operation, increased durability, and improved torque handling compared to the stock bevel gears. Constructed from high-carbon steel, these gears are built to withstand aggressive bashing, high-power setups, and hard landings while providing quieter and more efficient drivetrain performance. ⚡ Features: ⚙️ Precision-machined helical spiral-cut gear design💪 High-carbon steel construction for maximum durability🔧 Stronger and smoother than stock bevel gears🧭 Improved load distribution for increased drivetrain efficiency🔇 Reduced gear noise compared to straight-cut designs🚀 Handles increased torque and high-power setups more effectively🏁 Perfect for aggressive bashing and upgraded Mini Maxx builds 📏 Specifications: Part Number: HRASMMX9390FRing Gear Tooth Count: 39TPinion Gear Tooth Count: 10TGear Style: Helical Spiral CutMaterial: High-Carbon Steel 📦 Includes: (1) 39T Steel Helical Front Ring Gear(1) 10T Steel Helical Front Pinion Gear 🔧 Compatibility: Traxxas Mini Maxx 💡 Pro Tip: Helical gears help reduce drivetrain noise and improve smoothness under load—making them an excellent upgrade for powerful brushless Mini Maxx setups running larger tires or high-grip surfaces.    

Read more less

  ⚡ Quick Cell Checks. Simple Connection. No App Required. The Traxxas iD LiPo Battery Balance Lead Adapter makes it easy to connect Traxxas iD LiPo batteries to external cell voltage checkers without needing the EZ-Peak Live app or charger interface. Designed for quick battery health checks and voltage monitoring, this adapter is a must-have tool for Traxxas owners running iD-equipped LiPo packs. Compatible with 2S, 3S, and 4S Traxxas iD batteries, the 2938X adapter provides a simple and convenient way to monitor individual cell voltages trackside or in the workshop. ⚡ Features: 🔋 Allows Traxxas iD batteries to connect to accessory cell voltage checkers⚙️ Compatible with 2S, 3S, and 4S Traxxas iD LiPo batteries📡 Eliminates the need to use the EZ-Peak Live app for voltage checks🔧 Simple plug-and-play operation🧰 Great for battery maintenance and monitoring cell health🏁 Compact and easy to keep in your pit bag or toolbox 📦 Includes: (1) Traxxas iD LiPo Battery Balance Lead Adapter 🔧 Compatibility: Traxxas iD 2S LiPo BatteriesTraxxas iD 3S LiPo BatteriesTraxxas iD 4S LiPo BatteriesCompatible accessory cell voltage checkers ⚠️ Important Note: 🚫 This adapter is NOT intended for charging batteries.⚡ Use ONLY for connecting Traxxas iD batteries to compatible cell voltage checkers. 💡 Pro Tip: Regularly checking individual cell voltage is one of the easiest ways to monitor battery health and catch weak or damaged cells before they become a bigger issue.  

Read more less

⚙️ Heavy-Duty Strength. Precision Fit. Built for UDR Abuse. Keep your Traxxas Unlimited Desert Racer performing at its best with the genuine Traxxas Front Right Lower Suspension Arm. Designed as a direct replacement for the factory component, this heavy-duty suspension arm delivers the durability and precision needed to handle high-speed desert runs, hard landings, and rough terrain. Built specifically for the UDR platform, this arm includes the arm insert and one pre-installed pillow ball for quick and easy installation. ⚡ Features: 🔧 Genuine Traxxas replacement suspension arm💪 Durable composite construction for high-impact resistance⚙️ Direct-fit replacement for factory suspension geometry🧭 Maintains precise suspension movement and handling🏁 Designed for demanding Unlimited Desert Racer conditions🔩 Includes pre-installed pillow ball for easier installation🚀 Perfect for repairs, rebuilds, or keeping spare parts on hand 📦 Includes: (1) Front Right Lower Suspension Arm(1) Arm Insert(1) Pre-Installed Pillow Ball 📏 Specifications: Part Number: 8532Position: Front Right Lower 🔧 Compatibility: Traxxas Unlimited Desert Racer (UDR) 💡 Pro Tip: Suspension arms are one of the smartest spare parts to keep in your pit box—especially for high-speed UDR bashing where rough terrain and jumps can put serious stress on the suspension system.

Read more less

⚙️ Factory Fit. Heavy-Duty Durability. Ready for Desert Action. Keep your Traxxas Unlimited Desert Racer handling rough terrain with confidence using the genuine Traxxas Front Left Lower Suspension Arm. Built as a direct replacement for the factory component, this heavy-duty arm is engineered to handle hard impacts, rough landings, and high-speed off-road punishment while maintaining precise suspension geometry. Designed specifically for the UDR platform, this replacement arm includes the arm insert and one pre-installed pillow ball for fast and convenient installation. ⚡ Features: 🔧 Genuine Traxxas replacement suspension component💪 Durable composite construction for impact resistance⚙️ Direct-fit replacement maintains factory suspension geometry🧭 Provides smooth and precise suspension movement🏁 Built for demanding Unlimited Desert Racer conditions🔩 Includes pre-installed pillow ball for easier installation🚀 Ideal for repairs, rebuilds, and spare parts inventory 📦 Includes: (1) Front Left Lower Suspension Arm(1) Arm Insert(1) Pre-Installed Pillow Ball 📏 Specifications: Part Number: 8533Position: Front Left Lower 🔧 Compatibility: Traxxas Unlimited Desert Racer (UDR) 💡 Pro Tip: Keeping spare suspension arms on hand is a smart move for UDR owners—high-speed desert runs and rough terrain can put serious stress on suspension components during aggressive driving.

Read more less

💥 Heavy-Duty Rear Support. Factory Fit. Ready for Big Hits. Replace worn or damaged rear bumper components on your X-Maxx with the genuine Traxxas Rear Bumper Mount & Bumper Support. Designed specifically for the Traxxas X-Maxx platform, this factory replacement part helps maintain proper bumper support and chassis protection during hard landings, crashes, and aggressive bashing sessions. Built from durable composite material, the 7734X rear bumper support is engineered to absorb impacts while keeping your bumper assembly secure and properly aligned. ⚡ Features: 💪 Genuine Traxxas replacement component🔧 Rear bumper mount and support assembly⚙️ Durable composite construction for impact resistance🏁 Maintains proper bumper alignment and chassis protection🚀 Designed for aggressive X-Maxx bashing conditions🛞 Direct-fit factory replacement part 📦 Includes: (1) Rear Bumper Mount(1) Rear Bumper Support 🔧 Compatibility: Traxxas X-Maxx 💡 Pro Tip: The rear bumper supports on X-Maxx trucks take a ton of abuse during wheelies and hard landings—many bashers keep an extra set in their pit box or upgrade to aftermarket heavy-duty supports for extreme jumping sessions. Community feedback often points to reinforced RPM-style supports for added durability under heavy impacts.

Read more less

 ⚙️ Protect Your Drivetrain. Factory Fit. Built for Bashing. Keep dirt, debris, and rocks out of your drivetrain with the genuine Traxxas Maxx Gear Covers. Designed as direct replacement parts for the Traxxas Maxx 1/10 Brushless Monster Truck, these covers help protect critical gears and drivetrain components during aggressive bashing and off-road driving. Whether you're replacing worn covers or keeping spares in your pit box, these factory Traxxas components ensure proper fitment and reliable protection for your Maxx platform. ⚡ Features: 🔧 Genuine Traxxas replacement gear covers💪 Durable composite construction for long-lasting protection⚙️ Helps shield drivetrain components from dirt and debris🏁 Maintains proper drivetrain coverage and protection🚀 Perfect for repairs, maintenance, or spare parts inventory🛞 Direct-fit factory replacement design 📦 Includes: (2) Maxx Gear Covers 📏 Specifications: Part Number: 8987 🔧 Compatibility: Traxxas Maxx 1/10 Brushless Monster Truck 💡 Pro Tip: Keeping gear covers properly installed helps prevent rocks and debris from damaging spur gears and drivetrain components—especially important when bashing on gravel, dirt, or loose terrain.  

Read more less

This is a replacement Traxxas Receiver Box Set, and is intended for use with the Traxxas 1/10 Rally Racer and Slash 4x4 Ultimate 1/10 scale short course truck. This set also includes a rubber seal, foam pads and mounting hardware.  COMPATIBILITY: Traxxas RallyTraxxas Slash 4x4 Ultimate

Read more less

💧🔧 Restore Factory Receiver Box Protection The Traxxas Receiver Box Seal Kit is a genuine replacement service kit designed to restore the waterproof and dust-resistant seal of compatible Traxxas receiver boxes. Whether you're rebuilding your receiver box after maintenance or replacing worn seals, this kit includes the essential components needed to maintain reliable protection for your receiver and electronics. Keep your electronics protected from water, dirt, mud, and debris with fresh factory seals. 🏁 About the Receiver Box Seal Kit 💧 Maintain Electronics Protection Over time, receiver box seals can become worn or damaged. This kit helps restore the original sealing performance to help protect sensitive electronics. 🔧 Genuine Traxxas Replacement Components Includes factory replacement seals and silicone grease to ensure proper installation and long-lasting performance. 🏎️ Ideal for Maintenance & Rebuilds Perfect for: Receiver box service Vehicle rebuilds Electronics maintenance Replacing damaged seals 🔧 Features ✔ Genuine Traxxas replacement seal kit✔ Restores receiver box sealing performance✔ Helps protect electronics from water and debris✔ Includes replacement O-ring and seals✔ Silicone grease included for proper installation✔ Easy maintenance solution✔ Direct replacement components 📦 Includes (1) O-Ring Receiver Box Seals Silicone Grease 🚗 Compatibility Traxxas Drag Slash Traxxas E-Revo VXL 2.0 Traxxas Revo Nitro Traxxas Slash 2WD Traxxas Slash Late Model Traxxas Slash Modified 💡 Perfect For ✔ Receiver box maintenance✔ Waterproofing restoration✔ Vehicle rebuilds✔ Electronics protection✔ Preventative maintenance ⚠️ Notes Designed for compatible Traxxas receiver boxes Verify compatibility before installation Receiver box sold separately

Read more less

⚙️ Smooth Performance. Complete Bearing Upgrade. Built for the Trail. Restore efficiency and improve drivetrain performance with the FastEddy TRX-4M Ford Bronco Bearing Kit. Designed specifically for the Traxxas TRX-4M Ford Bronco, this complete bearing kit includes high-quality rubber-sealed steel bearings to replace worn bushings and bearings throughout your crawler. Instead of hunting down individual bearing sizes, FastEddy provides a complete application-specific kit so you get exactly what you need to keep your TRX-4M running smooth, efficient, and ready for the next adventure. ⚡ Features: ⚙️ Complete bearing kit designed specifically for the TRX-4M Ford Bronco💪 High-quality rubber-sealed steel bearings🛞 Reduces drivetrain friction for smoother operation🔧 Helps improve efficiency and runtime🏁 Restores worn driveline and axle performance🧰 Convenient complete kit—no guessing bearing sizes🚀 Ideal for maintenance, rebuilds, and performance upgrades 📦 Includes: (8) 3x6x2.5mm Bearings(4) 3.5x7x2.5mm Bearings (Metal Shielded)(4) 4x8x3mm Bearings(4) 5x8x2.5mm Bearings(2) 8x12x3.5mm Bearings 🔧 Compatibility: Traxxas TRX-4M Ford Bronco ⚠️ Important Notes: 📏 Bearing requirements may vary depending on production date and installed aftermarket upgrades.🔍 Please verify bearing sizes on your vehicle before ordering.📸 Product photos showing loose bearings are for illustration purposes only and may not represent the exact contents of the kit. 💡 Pro Tip: One of the best upgrades for any crawler is replacing worn bushings and bearings. A fresh bearing kit helps reduce drivetrain drag, improve battery life, smooth out drivetrain operation, and keep your TRX-4M performing like new on the trail. 🪨🚙🔥

Read more less

🏁⚙️ Restore Smooth High/Low Gear Shifting The Traxxas TRX-4 2-Speed Drive Hub & Linkage Set is a genuine replacement component kit designed for TRX-4 models equipped with the factory 2-speed transmission. Whether you're repairing a worn transmission or restoring crisp shifting performance, this set includes the essential drivetrain components needed to maintain reliable high and low gear operation. Built to original Traxxas specifications, these replacement parts provide the precise fit and durability needed to keep your TRX-4 trail-ready. 🏁 About the 2-Speed Drive Hub & Linkage Set ⚙️ Restore Shifting Performance This replacement set includes the primary components used in the TRX-4 high/low 2-speed transmission, helping maintain smooth gear engagement and dependable shifting. 🔧 Genuine Traxxas Replacement Manufactured to factory specifications for proper fit, reliable operation, and long service life. 🛠️ Perfect for Repairs & Rebuilds Ideal for: Transmission repairs Restoring worn shifting components Routine drivetrain maintenance Complete transmission rebuilds 🔧 Features ✔ Genuine Traxxas replacement part✔ Direct replacement for TRX-4 2-speed transmission✔ Restores smooth high/low gear shifting✔ Factory fit and function✔ Durable construction for long service life✔ Ideal for maintenance and drivetrain repairs 📦 Includes (1) 2-Speed Drive Hub (1) Shift Dog (1) Shift Fork (1) 2-Speed Linkage 🚗 Compatibility Traxxas TRX-4 equipped with a factory 2-speed transmission ⚠️ Notes Genuine Traxxas replacement component. Designed for compatible TRX-4 models with the factory 2-speed transmission. Verify compatibility before installation.  

Read more less