RPM Hybrid Gearbox Housing & Rear Mounts (Black)PART #: RPM73612 Upgrade your Traxxas 2WD vehicle with the RPM Hybrid Gearbox Housing and Rear Mounts — engineered for unmatched strength, heat dissipation, and long-term durability. This hybrid setup combines a CNC-machined aluminum motor plate with RPM’s signature ultra-tough molded nylon housing and rear mounts, delivering a rugged solution for racers and bashers alike. Fits: Traxxas Slash 2WD Traxxas Rustler 2WD Traxxas Bandit Traxxas Stampede 2WD Key Features:Aluminum Motor Plate: 3mm thick 6061 T6 aluminum plate Locks in gear mesh for consistent settings Helps dissipate motor heat Not integrated into bumper mounts — no flex on rear impacts Molded Gearbox Housing: Made from RPM’s bulletproof nylon blend Fully enclosed design keeps debris out Compatible with stock motor cover Eliminates bottom hole from stock housing for cleaner internals Quieter operation than stock Rear Mounts (0° and 3° Included): Two sets of rear mounts included: 0° and 3° toe-in Easily serviceable—no need to remove the entire transmission Molded for tight tolerances with minimal suspension slop What’s Included: Hybrid gearbox housing 0° and 3° rear A-arm mounts 3mm aluminum motor plate Mounting hardware and instructions Tech Notes: Internal transmission components (gears, bearings, shafts) not included — transfer these from your stock setup. Replaces Traxxas #3691 and #3691A. Minor trimming of stock A-arms may be needed; no issues with RPM rear arms.

Read more less

  Traxxas Jato/Slayer Heavy Duty Rod Ends (8) – Part #5525R💪 Built Stronger. Ready for More. Upgrade your rig with the Traxxas 5525R Heavy Duty Rod Ends. Designed specifically for the Jato and Slayer, these rod ends offer increased durability for high-impact conditions and can also be used as a stronger alternative to standard TRA5525 ends in a variety of Traxxas vehicles. ✅ Heavy-duty construction for added strength✅ Compatible with Jato, Slayer, and other models using TRA5525 ends✅ Direct fit with no modifications required✅ Ideal upgrade for high-stress suspension or steering components❌ Note: Pillow balls not included 📦 Includes: (8) Heavy Duty Rod Ends COMPATIBILITY: Traxxas Jato Traxxas Rustler Traxxas Slash Traxxas Stampede

Read more less

  Keep your servo running like new with this genuine replacement gear set for the Traxxas 2080 Micro Waterproof Servo. Whether you're repairing worn or stripped gears, this kit is the perfect fix to restore smooth and precise performance. 🔧 Features: Direct replacement for Traxxas 2080 micro waterproof servo Includes all internal gears needed for a full rebuild Maintains waterproof integrity when used with proper installation Made from durable materials for long-lasting performance 📦 Includes: Complete internal gear set for the 2080 servo Don’t let stripped gears slow you down—refresh your servo and get back on track!

Read more less

Keep your steering sharp and responsive with this genuine Traxxas replacement servo horn and linkage set for the Maxx 1/10 Brushless Monster Truck. Whether you're upgrading or replacing worn components, this factory-assembled set ensures a precise fit and reliable performance. 🔧 Features: Direct replacement for stock Maxx components Factory-assembled 46mm linkage rod for hassle-free installation Designed to maintain smooth, accurate steering response 📦 Includes: (1) Servo Horn (1) 46mm Linkage Rod (pre-assembled) A must-have spare for every Maxx owner—stay ready for action with dependable OEM parts from Traxxas.

Read more less

Keep your Maxx tough where it counts! The Traxxas 8926 Front Bulkhead Tie Bar is a direct replacement part designed to reinforce the front end of your Maxx 1/10 Brushless Monster Truck. Made from strong steel, this set includes one upper and two lower tie bars to help maintain chassis strength during heavy-duty action. 🔩 Features: Genuine Traxxas replacement part Durable steel construction for added strength Helps prevent bulkhead flex and damage under hard impacts Precision fit for the Traxxas Maxx 1/10 Brushless Monster Truck 📦 Includes: (1) Upper Steel Tie Bar (2) Lower Steel Tie Bars Built for bashing? Keep your Maxx together with this must-have front-end reinforcement!

Read more less

The Traxxas 7430R Long Chassis Front Bulkhead is a direct replacement part designed for Rustler 4X4 and Rustler 4X4 VXL models equipped with the optional extended chassis (TRA6723R). Built for durability and precision fit, it’s a must-have when upgrading or repairing your long wheelbase setup. Features:• Replacement front bulkhead for long chassis setups• Compatible with Rustler 4X4 and 4X4 VXL• Designed for use with optional TRA6723R extended chassis Includes:• (1) Long Chassis Front BulkheadPart Number: 7430R Keep your extended Rustler 4X4 performing at its best with genuine Traxxas parts.

Read more less

🛡️ Protect your chassis from the rough stuff. The Traxxas Skidplate Set includes both front and rear skidplates to shield your chassis from scrapes, impacts, and debris. Made from durable molded composite material, these skidplates are a direct replacement for your stock parts and keep your truck ready for action. ✅ Genuine Traxxas replacement parts✅ Durable composite construction✅ Includes both front and rear skidplates✅ Vehicle Compatibility: • Traxxas Slash 📦 Includes:• (1) Front Skidplate (Black)• (1) Rear Skidplate (Black)

Read more less

Traxxas Shock Caps & Bottoms (2)Part #: 3767 Refresh your suspension setup with this set of replacement shock caps and bottoms from Traxxas. Designed for reliability and a perfect fit, these components help restore smooth shock performance on a variety of Traxxas vehicles. Features: Genuine Traxxas replacement parts Ideal for routine maintenance or repair Durable plastic construction Compatible with Traxxas Ultra Shocks Includes: (2) Shock Caps (2) Shock Bottoms

Read more less

  Restore smooth power delivery to your TRX-4’s front axle with this genuine Traxxas Portal Drive Input Gear set. This kit includes the front portal input gear, drive pin, and cross pin—everything you need for a quick and reliable repair. Features:• Replacement front portal drive input gear• Includes drive pin and cross pin• Precision-engineered for TRX-4 portal axle systems• Durable steel construction for trail-tough performance Includes:• (1) Front Portal Drive Input Gear• (1) Drive Pin• (1) Cross PinPart Number: 8257 Genuine Traxxas parts for dependable fit, function, and durability on the toughest trails.

Read more less

Overview:Upgrade your drivetrain with the Traxxas Spiral Cut Differential Ring & Pinion Gear Set (Front). Precision-machined from hardened steel, this gear set provides maximum durability, smoother power transfer, and reduced slop under high loads. The spiral cut design ensures quieter operation and improved efficiency compared to straight-cut gears, making it a must-have upgrade for high-performance Traxxas builds. Features: Spiral cut design for smoother and quieter operation Hardened steel construction for maximum strength and wear resistance Provides precise gear mesh and improved durability under extreme power Genuine Traxxas factory upgrade part Compatibility (Front Differential): Traxxas Revo 3.3 Traxxas E-Revo Traxxas E-Revo Brushless Traxxas Summit Traxxas E-Maxx Brushless Traxxas T-Maxx 3.3 Includes: (1) Spiral Cut Ring Gear (1) Spiral Cut Pinion Gear Part Number: 5379R

Read more less

Overview:Upgrade your drivetrain with the Traxxas X-Maxx Constant Velocity (CV) Steel Driveshaft. Built for the 8S-spec heavy-duty drivetrain, this CV driveshaft delivers maximum strength, smoother power delivery, and reduced wear under extreme torque loads. It’s the perfect solution for high-power setups and hard bashing where reliability is critical. For owners of the older 6S X-Maxx, this driveshaft can also be used as an upgrade with additional required parts. Features: Heavy-duty steel CV driveshaft for extreme durability Designed for 8S-spec X-Maxx drivetrain Provides smoother, more efficient power transfer Reduces driveline flex and wear Genuine Traxxas factory upgrade Compatibility: X-Maxx 8S – Direct replacement X-Maxx 6S – Upgrade (requires additional parts: 7751X, 7754X, 7768 or 7768R) Includes: (1) Constant Velocity Steel Driveshaft Part Number: 7750X ⚡ Pro Tip: When upgrading a 6S X-Maxx to the 8S-spec drivetrain, grab all the required parts in one go (7751X, 7754X, and 7768 or 7768R) to ensure a smooth installation and bulletproof performance.

Read more less

Conquer the toughest terrain with Traxxas 2.2" Canyon Trail Crawler Tires. These aggressive, high-traction tires are designed to provide maximum grip on rocks, dirt, and trails. Perfect for your TRX-4 or any 2.2" crawler build, they come complete with foam inserts for optimal support and performance. Features:• Aggressive tread pattern for ultimate off-road traction• 2.2" size fits standard crawler wheels• Includes foam inserts for enhanced support• Perfect for TRX-4 and other 1/10-scale crawlers Includes:• (2) 2.2" Canyon Trail Crawler Tires• (2) Foam InsertsPart Number: 8170 Tackle any trail with confidence—built tough for serious crawling.  

Read more less