Upgrade your drivetrain with the Traxxas Rear HD Driveshaft Assembly, built tough with a 6mm axle for maximum durability. Designed for use on the Hoss 4x4, Rustler 4x4, and Slash 4x4, this assembly is required when your vehicle is equipped with the Traxxas Extreme Heavy Duty Suspension Upgrade Kit (TRA9080X). ✅ Heavy-Duty Strength – Built to handle extreme torque and off-road abuse✅ Direct Replacement – OEM fit for Hoss 4x4, Rustler 4x4, and Slash 4x4✅ Complete Assembly – Comes pre-assembled with axle and hardware for quick install✅ For HD Suspension Models – Compatible only with vehicles using the TRA9080X Extreme Heavy Duty Suspension Kit Includes: (1) Rear HD Driveshaft Assembly w/ 6mm axle Required hardware Compatibility: Traxxas Hoss 4x4 (with TRA9080X kit) Traxxas Rustler 4x4 (with TRA9080X kit) Traxxas Slash 4x4 (with TRA9080X kit) Take your 4x4’s durability to the next level with the Traxxas 9052 Rear HD Driveshaft Assembly — built for serious bashing and racing.

Read more less

Traxxas Maxx Duty Driveshaft Assembly – Part 8950Tough Enough for Maxx Power. Ready for Action. The Traxxas Maxx Driveshaft Assembly (8950) is a direct replacement for the Maxx 1/10 Brushless 4WD Monster Truck, designed to handle brutal brushless torque and aggressive off-road abuse. Use it in the front or rear to restore performance or keep it on hand as a critical spare. ✅ Maxx-duty design – stronger than stock driveshafts✅ Fully assembled and ready to install✅ Fits front or rear position✅ Perfect for brushless setups and hard-driving conditions✅ Includes screw pin for secure mounting 📦 Includes: (1) Maxx Duty Driveshaft Assembly (Front or Rear) (1) Screw Pin Part #: 8950 💡 Pro Tip: Keep one in your pit box — a snapped driveshaft can end a bash session early.

Read more less

This is a replacement slipper shaft with spring pin from Traxxas. COMPATIBILITY: Traxxas BanditTraxxas Drag SlashTraxxas RallyTraxxas Rustler 2wdTraxxas Slash 2wdTraxxas Slash 4x4Traxxas Slash 4x4 UltimateTraxxas Stampede 2wdTraxxas Stampede 4x4Traxxas Telluride 4x4 

Read more less

Conversion Kit Overview:The Traxxas Slash 4X4 Body Conversion Kit upgrades your truck to a clean, secure clipless body mounting system. Designed for convenience and durability, this kit eliminates traditional body clips while keeping your body firmly in place for a sleek, modern setup. 🔧 Key Features Converts Slash 4X4 to clipless body mounting Clean, clip-free body installation Secure latching system Direct fit Traxxas upgrade Improves ease of body removal and installation 📦 Includes Front Body Mounts Rear Body Mounts Latches Mounting Hardware 🚗 Compatibility Traxxas Slash 4X4 Traxxas Slash 4X4 Ultimate A simple upgrade that cleans up your build and makes body removal faster and easier—perfect for anyone looking to ditch body clips for good.  

Read more less

  Traxxas Differential Output Yokes (Black) (VXL)Part #: 4628R Keep your drivetrain running smooth with this set of replacement Traxxas Differential Output Yokes for VXL models. Designed for durability and precision fit, these black yokes ensure proper power delivery from the differential to the driveshafts. Features: Genuine Traxxas replacement parts Compatible with VXL drivetrain setups Heavy-duty black finish for a clean, factory look Includes hardware for easy installation Includes: (2) Differential Output Yokes (2) 3x5mm Countersunk Screws (2) Screw Pins  

Read more less

  Light up your Slash and add front-end protection with the Traxxas Front Bumper & Support LED Light Kit. Designed specifically for the Slash 2WD, this upgrade combines a durable front bumper with integrated LED lighting for improved visibility and a killer scale look. Features & Benefits: Integrated LED light kit for enhanced visibility in low-light conditions Durable front bumper helps protect the chassis and suspension Factory-fit design for clean installation Genuine Traxxas accessory for reliable performance Compatibility: Traxxas Slash 2WD Includes: Front bumper and support LED light kit components A great upgrade for Slash owners looking to add protection, visibility, and scale realism to their truck.

Read more less

Maximize run time with the Traxxas Parallel Battery Wire Harness. Designed with the Traxxas iD® connector system, this harness lets you safely connect two Traxxas iD batteries in parallel to double your run time without increasing voltage. Perfect for long bash sessions and extended racing fun. ⚡ Features: Compatible with Traxxas iD® equipped batteries Connects two packs in parallel for longer run times Maintains original voltage while doubling capacity Heavy-duty 12-gauge Maxx® Cable for efficient power transfer Secure molded connectors for reliability 📦 Includes: (1) Traxxas 3064X Parallel Battery Wire Harness (iD®) Part #: 3064X

Read more less

🔥 More Nitro. More Power. Built for Traxxas Engines. Traxxas Top Fuel 33% is a premium nitro fuel formulated specifically for RC cars and trucks. Designed to deliver strong performance while maintaining engine protection, it offers a balanced blend of power, lubrication, and reliability. 🏁 About Traxxas Top Fuel ⚡ High-Performance Formula With 33% nitromethane, this fuel delivers increased power and acceleration compared to standard 30% blends—without sacrificing engine life. 🛢️ Advanced Lubrication A carefully balanced mix of synthetic and castor oils provides excellent lubrication, helping protect your engine under high temperatures and demanding conditions. 🧪 Consistent & Reliable Made with high-quality ingredients and tight blending standards, Top Fuel is designed for consistent performance tank after tank. 🔧 Key Features ✔ 33% nitro content for increased power✔ Blend of synthetic and castor oils✔ Provides excellent high-temp protection✔ Helps extend engine life✔ Anti-foaming agents for stable fuel flow✔ Corrosion inhibitors for long-term reliability✔ Designed specifically for RC cars and trucks 📦 Includes (1) Quart of Traxxas Top Fuel 33% Nitro Fuel ⚙️ Notes Compatible with most nitro engines (optimized for Traxxas engines) Higher nitro content increases performance while maintaining lubrication balance 🔥 Run harder. Stay protected. Get the most out of every tank.  

Read more less

🔧 Keep your Maxx steering strong and precise. These replacement Traxxas Maxx Steering Blocks are a direct factory fit for the Maxx 1/10 Monster Truck. Built to OEM specs, they restore smooth steering performance and ensure proper front-end alignment—perfect for repairs or routine maintenance. ✅ Genuine Traxxas replacement parts✅ Direct fit for quick installation✅ Restores factory steering performance✅ Vehicle Compatibility: • Traxxas Maxx 📦 Includes:• (1) Left Steering Block• (1) Right Steering Block

Read more less

Restore your X-Maxx’s front suspension with this genuine Traxxas Caster Block Set. This replacement set includes both left and right caster blocks, clearly marked for correct installation. Built to handle the massive power and rugged terrain the X-Maxx is known for. Features:• Includes one left and one right caster block• Direct replacement for Traxxas X-Maxx• "Left" and "Right" markings ensure proper installation Includes:• (1) Left Caster Block• (1) Right Caster BlockPart Number: 7732 Keep your X-Maxx tough, true, and ready for action.  

Read more less

  Traxxas Maxx Steel CV Driveshaft Set (4) – Part 8950XFull-Metal Strength. Smooth Power Transfer. The Traxxas 8950X Steel Constant-Velocity Driveshaft Set is a premium upgrade for your Maxx, delivering superior strength and silky-smooth power delivery. These fully assembled steel CV driveshafts are perfect for high-torque brushless setups, big jumps, and aggressive off-road terrain. ✅ Includes 4 heavy-duty steel CV driveshafts – run front or rear✅ Fully assembled and ready to install✅ Improved durability over stock plastic shafts✅ Smooth, consistent power transfer through full suspension travel✅ Ideal for high-performance brushless builds and extended runtime stability 📦 Includes: (4) Steel Constant-Velocity Driveshafts (Assembled – Front or Rear) Part #: 8950X 💡 Pro Tip: Upgrade all four corners at once to eliminate drivetrain weak points and reduce maintenance.  

Read more less

Traxxas Camber Link (Grey) (4) Part #: 3641A Keep your suspension solid with the Traxxas Camber Link Set. These fixed, non-adjustable links provide a preset camber angle for consistent handling and a simple “set it and forget it” solution. Perfect for drivers who want durability and convenience without constant tuning. ✅ Fixed Camber Angle – Consistent geometry, no adjustments needed✅ Durable Composite Construction – Built to handle racing and bashing abuse✅ Direct Replacement – Easy install with factory precision✅ Set of Four – Complete coverage for your ride Compatibility: Traxxas Slash 2WD Traxxas Rustler 2WD Traxxas Stampede 2WD Traxxas Bandit Includes: (4) Grey Camber Links ⚡ Simple. Strong. Reliable. Traxxas camber links keep you in the race without the wrenching.

Read more less

Keep your drivetrain smooth and reliable with the Traxxas Rear Differential Ring and Pinion Gear Set. Designed for the Mini Maxx and Mini XRT, this set includes the 47-tooth ring gear and 12-tooth input pinion gear to restore differential performance. ✅ Direct Replacement – OEM fit for Mini Maxx and Mini XRT rear differential✅ Durable Construction – Built to handle high torque and hard bashing✅ Complete Set – Includes both ring gear and input pinion gear✅ Note: Pinion gear is not compatible with optional center differential or slipper clutch Includes: (1) 47T Ring Gear (1) 12T Input Pinion Gear Compatibility: Traxxas Mini Maxx Traxxas Mini XRT Restore smooth, efficient power transfer with the Traxxas 10779 Ring & Pinion Gear Set — tough enough for extreme 1/10 monster truck action.  

Read more less

💧 Factory shocks. Ready to race. The Traxxas Ultra Shocks (XX-Long) are genuine replacement shocks designed for smooth, reliable suspension performance. Molded in durable gray plastic, these shocks come pre-filled with damper oil and include springs and preload spacers—ready to install right out of the package. ✅ Stock replacement for: • Traxxas Rustler (rear) • Traxxas Stampede (rear) • Nitro Stampede (rear) • Nitro Rustler (rear) • Nitro Sport (rear)✅ Also fits front or rear on: • Traxxas T-Maxx • Traxxas E-Maxx 📦 Includes:• (2) XX-Long Gray Ultra Shocks (assembled)• Springs• Preload spacers• Damper oil

Read more less

Unleash the full potential of your TRX-4M with the Traxxas 6250 Brushless FOC Power System Combo! This powerful upgrade delivers up to 50% more speed and performance than the stock brushed system, all while maintaining low-speed control and crawling precision with Field-Oriented Control (FOC) technology. The 3350kV brushless outrunner motor and waterproof ECM install easily with no mods—just plug and play. Fully compatible with Traxxas TQ and TQi transmitters and 2S TRX-4M iD® LiPo batteries. Pro Scale® lighting and three selectable drive modes (Sport, Trail, Crawl) are all retained. Features:• Powerful 3350kV brushless outrunner motor• Field-Oriented Control (FOC) for incredible torque and control• Plug-and-play installation using original ECM mounts• Retains Pro Scale® lighting and 3 drive modes• Waterproof ECM with integrated 3-channel receiver• Compatible with 2S TRX-4M iD® LiPo batteries• Includes 11-tooth brass pinion gear• Works with TQ and TQi transmitters Includes:• (1) TRX-4M Brushless FOC Power System ComboPart Number: 6250 Take your TRX-4M from fun to fierce—with the brushless upgrade that redefines control and performance.

Read more less

Conversion Kit Overview:The Traxxas Slash 2WD Body Conversion Kit upgrades your truck to a modern clipless body mounting system, eliminating traditional body clips for a cleaner look and easier access. Designed for convenience and reliability, this kit keeps your body secure while making installation and removal quick and simple. 🔧 Key Features Converts Slash 2WD to clipless body mounting Clean, clip-free design Secure latching system Easy body installation and removal Direct fit Traxxas upgrade 📦 Includes Front Body Mounts Rear Body Mounts Latches Mounting Hardware 🚗 Compatibility Traxxas Slash 2WD A simple upgrade that improves both looks and usability—perfect for anyone ready to ditch body clips on their Slash 2WD.  

Read more less

This is a set of two Traxxas Standard Compound Kumho Venture MT Tires, Pre-Mounted on SCT Split-Spoke Wheels. This tire set is intended for use on the front of the Traxxas Slash. The race-winning Kumho Road Venture MT tire is the latest competition-proven tread pattern to be captured in 1/10 scale by Traxxas and are now standard equipment on the latest Scott Douglas/Mike Oberg Edition Slash and Slash 4X4, and are also available in unmounted pairs with foam inserts, as well as mounted pairs on SCT Wheels. The distinctive design is realistically molded in the long lasting, versatile standard compound, with unique, aggressive sidewall detail and raised lettering that have been perfectly rendered for realistic looks and authentic performance. Features: Long-wearing standard compound Authentic Road Venture MT tread pattern with performance tuned foam inserts Direct fit for Slash and Slash 4X4 with specific front and rear rim offsets Replacement part for these models: Traxxas Nitro SlashTraxxas Slash 2wdTraxxas Telluride 4x4

Read more less

This is a set of two replacement Traxxas Nerf Bars, and are intended for use with the Traxxas Slash short course race truck. COMPATIBILITY: Traxxas Drag SlashTraxxas Slash 2wd

Read more less

Traxxas TRX-4M Low Range Transmission Gear Set – Part #9776R🐢 Precision Crawling Power. Upgrade your TRX-4M with this Low Range Transmission Gear Set featuring a 40.3:1 reduction ratio. Designed for ultimate torque and slow-speed control, this setup is ideal for serious crawling and technical trail driving. ✅ 40.3:1 gear reduction for ultra-low speed crawling✅ Perfect for scale realism and obstacle control✅ Includes 11-tooth pinion gear✅ Drop-in fit for all TRX-4M models✅ Genuine Traxxas performance and durability 📦 Includes: (1) Low Range Transmission Gear Set (1) 11T Pinion Gear 💡 Pro Tip: Pair with high-torque servos and weighted wheels for the ultimate crawling setup.

Read more less

Keep your suspension solid and secure with this pack of Traxxas Suspension Pin Retainers for the X-Maxx and XRT. Designed to hold the hinge pins in place at the inner upper arm position, these retainers are a must-have for routine maintenance or repairs. 🔧 Includes: (4) Suspension Pin Retainers 🛠️ Features: Direct replacement parts for Traxxas X-Maxx and XRT Ensures secure hinge pin fitment Made from durable molded composite Simple install – ideal for repairs or spares Don’t let loose pins take you out of the action—keep your X-Maxx or XRT dialed in with these factory-spec retainers!

Read more less

Gearbox Overview:This is a replacement set of left and right gearbox halves for the Traxxas Magnum 272 transmission. It restores proper drivetrain housing and alignment for smooth operation. 🔧 Key Features ✔ Replacement gearbox halves (left & right)✔ Designed for Magnum 272 transmission✔ Includes idler gear shaft✔ Maintains proper gear alignment✔ Direct fit design 📦 Includes (1) Left Gearbox Half (1) Right Gearbox Half (1) Idler Gear Shaft 🚗 Compatibility Traxxas Bandit Traxxas Rustler 2WD Traxxas Slash 2WD Traxxas Stampede 2WD ⚠️ Note: Not compatible with Magnum 272R transmission Ideal for replacing damaged gearbox cases, this set helps keep your drivetrain properly aligned and running smoothly.  

Read more less

Take control from a distance with the Traxxas Wireless Winch Remote, designed for effortless operation of multiple Traxxas accessories. Whether you're pulling a buddy out of trouble on the trail or counting down to a drag strip launch, this compact controller gives you the power right in your hand. Compatible with both the Traxxas Pro Scale Winch (8855) and the Traxxas Drag Race Start Light (6595), this remote adds convenience, versatility, and a professional feel to your RC experience. Features: ✔️ Works with the Traxxas Pro Scale Winch (8855)✔️ Controls the Traxxas Drag Race Start Light (6595)✔️ Wireless operation for easy, handheld control✔️ Dual-purpose functionality for crawling and drag racing✔️ Simple, intuitive button layout Includes: (1) Traxxas Wireless Winch Remote

Read more less

Keep your X-Maxx running strong with this genuine Traxxas replacement right lower suspension arm. Built to handle the extreme forces and heavy impacts the X-Maxx is known for, this arm restores proper suspension geometry and durability so you can get back to bashing with confidence. Features Official Traxxas 7730 replacement part Fits right lower suspension position Durable composite construction for high-impact performance Direct factory fit — no modifications needed Includes (1) Traxxas X-Maxx Right Lower Suspension Arm (7730)

Read more less

Traxxas Hoss 54T Spur Gear – 0.8 Metric Pitch (32P Compatible) – Part 3956XHigh-Torque Gear for Big Power Builds. The Traxxas 3956X 54-Tooth Spur Gear is specifically designed for the Hoss 4X4 VXL 4WD Monster Truck, providing durable power transfer for aggressive driving and brushless torque. With 0.8 Mod metric pitch (compatible with 32-pitch), it’s the perfect match for high-load conditions. ✅ 54-tooth spur gear – factory spec for torque-heavy setups✅ 0.8 Mod (metric pitch) – compatible with 32-pitch pinions✅ Heavy-duty molded construction – strong and durable✅ Designed for Hoss 4X4 VXL – optimized for monster truck drivetrain✅ Requires Traxxas #6780 Center Differential for installation 📦 Includes: (1) 54T Spur Gear (0.8MP / 32P compatible) Part #: 3956X 💡 Note: This spur gear is not a direct bolt-on—you’ll need the TRA6780 center differential to install it properly on the Hoss 4X4 VXL.  

Read more less

This is a replacement Traxxas Battery Hold Down Set, and is intended for use with the Traxxas Stampede 4X4. This package includes two battery hold downs, as well as a hold down retainer, battery post, and an angled body clip. COMPATIBILITY: Traxxas Stampede 4x4 Traxxas Telluride 4x4

Read more less

  Designed specifically for use with the Traxxas Maxx running the optional WideMaxx suspension kit, these durable toe links help maintain proper suspension geometry and handling. Constructed from tough composite material, they offer a lightweight and reliable option for your wide-stance Maxx build. 🔧 Features: Precision-molded 119.8mm toe links Designed for WideMaxx suspension setups Durable black composite construction Helps maintain accurate alignment and control 📦 Includes: (2) Black Toe Links Perfect for WideMaxx conversions—get the stability and control your Maxx needs!

Read more less

Restore precision steering to your Maxx with this genuine Traxxas replacement bellcrank set. Designed specifically for the Maxx 1/10 4WD Brushless Monster Truck, this set includes all the essential components needed for a complete steering assembly refresh. 🛠️ Features: Direct OEM replacement for the Maxx Maintains crisp, responsive steering performance Built from high-strength materials for durability under heavy loads 📦 Includes: (2) Steering Bellcranks (1) Bellcrank Support (1) Servo Saver (1) Servo Saver Spring (1) Draglink (2) 3x20mm Shoulder Screws Keep your Maxx sharp and responsive—perfect for high-speed runs and rugged off-road terrain.

Read more less

This is a replacement Traxxas X-Maxx Steering Block Set, including a left and right side. These blocks are labeled "Left" and "Right" and must be installed on the correct side.  

Read more less

  Steering Linkage Overview:This is a replacement steering linkage designed for select Traxxas 4x4 platforms. It comes pre-assembled with rod ends and hollow balls for quick installation and reliable steering performance. 🔧 Key Features ✔ Pre-assembled steering linkage✔ Includes rod ends and hollow balls✔ Maintains precise steering alignment✔ Supports smooth steering operation✔ Direct fit design 📦 Includes (1) Steering Linkage Assembly 🚗 Compatibility Traxxas Slash 4x4 Traxxas Stampede 4x4 Traxxas Telluride 4x4 Ideal for replacing worn or damaged components, this linkage helps keep your steering responsive and consistent.  

Read more less

Traxxas 54T Spur Gear – 0.8 Mod / 32-Pitch – Part 3956RSmooth Power Transfer. Built for Brushless. The Traxxas 54-Tooth Spur Gear (3956R) is a direct replacement part for high-performance 1/10 scale models using a 0.8 Mod / 32-pitch gear setup. Ideal for brushless power systems, this gear delivers strong, consistent power transfer while holding up to heavy torque. ✅ Tooth Count: 54T – perfect for torque-balanced gearing setups✅ Pitch: 32P / 0.8 Mod – tough and compatible with brushless motors✅ Durable molded construction – long-lasting under load✅ OEM direct fit for Traxxas models using 32P spur gears✅ Compatible with slipper clutch systems 📦 Includes: (1) 54-Tooth Spur Gear (32P / 0.8 Mod) Part #: 3956R 💡 Pro Tip: Pair with the correct pinion gear to dial in your ideal torque vs. speed ratio for your terrain and driving style.  

Read more less

Transform your Mini Maxx into a more stable, corner-carving machine with the Traxxas HD WideMaxx Suspension Kit. This upgrade widens the truck’s stance, delivering improved balance, increased grip, and more confidence at high speeds. Built from Traxxas’ extreme-duty cold weather compound, these suspension arms maintain flexibility and strength even in harsh conditions, making them perfect for year-round bashing. The wider track reduces rollover tendencies and enhances overall handling, whether you're carving corners or sending it across rough terrain. 🔧 Features:• Wider track width for improved stability and handling• Enhances cornering performance and high-speed control• Made from extreme-duty cold weather compound• Durable design for aggressive driving and rough terrain• Available in multiple color options 📦 Includes:• (1) HD WideMaxx Suspension Conversion Kit ⚙️ Specifications:• Vehicle: Traxxas Mini Maxx / Mini XRT• Material: Composite (cold weather compound) Take your Mini Maxx or Mini XRT to the next level with the WideMaxx Suspension Kit, delivering better control, improved stability, and the confidence to push harder in any conditions.    

Read more less

Give your rig a serious steering upgrade with the Traxxas 2265 High-Torque Metal-Gear Sub-Micro Servo. Producing 75 oz-in of torque, this servo delivers twice the torque of conventional sub-micro servos for stronger, more precise control. A metal-gear drivetrain and aluminum center section provide outstanding durability and improved heat dissipation, all in a fully waterproof design. Features: 75 oz-in of torque (high-torque performance) Fully waterproof construction Metal-gear drivetrain for durability Aluminum center section for improved heat dissipation Smooth, precise steering response Drop-in installation with no modifications required Fits: Traxxas TRX-4M® (direct drop-in upgrade) LaTrax® models Works as a shift servo on Traxxas TRX-4® and TRX-6® models Part Number: 2265 Perfect for crawlers and trail rigs that demand more torque, reliability, and waterproof performance.

Read more less

Upgrade your TRX-4M™ with the Traxxas Two-Speed Transmission, designed to deliver both high-speed fun and low-gear crawling control. This fully assembled transmission includes a Titan® 180 motor and lets you manually switch between a 9.9:1 high gear for general driving and a 32.7:1 low gear for maximum rock-crawling torque. It installs easily with the included mounting bracket and integrates perfectly with your stock drivetrain and portal axles. Features: Fully assembled with Titan® 180 brushed motor Selectable high and low gear via manual lever Low gear (32.7:1) provides torque for rock crawling High gear (9.9:1) ideal for general driving Includes mounting bracket and hardware Compatible with stock and optional TRA9776X speed gear set Not compatible with TRA9776R crawl gears Plug-and-play installation for TRX-4M models Includes: (1) Two-Speed Transmission (assembled) (1) Transmission Mount (2) 2x6mm Button Head Screws (1) 22T Adapter for Optional TRA9776X Gearing (1) Titan 180 Motor Product Manual Compatibility:Traxxas TRX-4M™ 

Read more less

Secure. Durable. Precision fit.Upgrade your suspension with the Traxxas Captured Shock Spring Retainers, designed to keep your springs locked in place under the toughest conditions. Whether you're launching off jumps or carving through rough terrain, these captured retainers eliminate spring pop-off issues and deliver consistent suspension performance run after run. Perfect for heavy-duty off-road applications, the set includes everything needed to reinforce your shocks — retainers, rod ends, and mounting hardware — all built to Traxxas factory specifications. ⚙️ Features Captured design keeps shock springs securely in place Eliminates spring slippage during hard impacts or jumps High-strength composite construction for durability Direct-fit upgrade for multiple Traxxas platforms Includes all hardware and shock rod ends for easy installation 📦 Includes (4) Captured Shock Spring Retainers (4) Shock Rod Ends Mounting Hardware ✅ Compatibility Traxxas Mini Maxx Traxxas Rustler 4×4 Traxxas Slash 4×4 / Slash 4×4 Ultimate / Slash Modified Traxxas Stampede 4×4 Traxxas Unlimited Desert Racer  

Read more less

Launch hard. Land smooth.Keep your Mini Maxx® or XRT™ under control with the Traxxas Wheelie Bar, built from the toughest composite material Traxxas offers. Designed to handle brutal acceleration and big-air landings, this wheelie bar keeps your truck planted while absorbing impacts like a pro. Its flexible design prevents backflips under full-throttle launches and cushions harsh touchdowns. Plus, the integrated carry handle makes it easy to grab and go when it’s time for the next bash session. 💪 Features: Prevents backflips during full-throttle acceleration Durable composite construction for extreme impact resistance Flexible design absorbs hard landings Convenient built-in handle for easy transport Available in multiple color options 📦 Includes: (1) Traxxas Mini Maxx® / XRT™ Wheelie Bar (Black)    

Read more less

The Traxxas Green GTR 3.5 Rate Shock Springs are the standard rear springs included with the Revo monster truck. Measuring 90mm, these springs are designed for use with the Progressive 1 rocker suspension system, offering balanced performance for a wide range of driving conditions. ✅ Standard Rear Springs – Stock replacement for Revo with 90mm Progressive 1 suspension✅ High-Quality Spring Steel – Consistent performance and long-lasting durability✅ Durable Powder-Coated Finish – Protects against wear and corrosion✅ Color-Coded – Green ends identify the 3.5 spring rate for easy tuning Includes: (2) Green 3.5 Rate GTR 90mm Rear Shock Springs Compatibility: Traxxas Revo (rear, with GTR shocks and 90mm Progressive 1 suspension) May also fit other GTR shock-equipped vehicles (check manual for exact fitment) Part #: 5438  

Read more less