Team Associated 6x13x5mm Factory Team Flanged Bearings (4) – Part 91559Low Friction. High Precision. Factory Tough. The Team Associated 6x13x5mm Factory Team Flanged Bearings (91559) are precision replacements designed specifically for the RC8B4 and RC8B4e platforms. Built for durability and smooth operation, these flanged bearings help reduce drag while providing a snug, secure fit in key drivetrain and suspension locations. ✅ Fits RC8B4, RC8B4e, and other compatible models✅ Flanged design for added stability and easy installation✅ Factory Team quality – smooth, long-lasting performance✅ Ideal for hubs, gearboxes, and suspension components✅ Low-friction design for peak efficiency on the track 📦 Includes: (4) 6x13x5mm Flanged Bearings Part #: 91559 💡 Pro Tip: Always keep a spare set of bearings in your pit bag—clean, fresh bearings can make a noticeable difference in run time and response.

Read more less

Team Associated 12mm Heavy Duty Ballstud Set (8) – Part 91050Maximum Strength. Extended Reach. Race Proven. The Team Associated 12mm Heavy Duty Ballstud Set (91050) is a direct replacement for SC10 4x4, B5, B5M, and other compatible platforms. With a longer 12mm thread length, these ballstuds are ideal for use in high-stress suspension and steering locations where extra bite and thread engagement are needed. ✅ Set of 8 heavy-duty 12mm ballstuds✅ OEM fit for SC10 4x4, B5, B5M, and more✅ Extra length (12mm) – for deeper mounting and improved strength✅ Precision-machined for smooth articulation and ball cup fit✅ Perfect for tuning camber links, steering arms, and shock setups 📦 Includes: (8) 12mm Heavy Duty Ballstuds Part #: 91050 💡 Pro Tip: Use longer ballstuds in plastic mounts or when adding spacers to maintain thread engagement and strength.

Read more less

Team Associated 7.8x3.5x0.5mm Aluminum Hub Spacer Washers – Blue (10) – Part 31387Fine-Tune Wheelbase. Maximize Setup Precision. The Team Associated 7.8x3.5x0.5mm Blue Aluminum Hub Spacer Washers (31387) are perfect for adjusting wheelbase and tuning suspension geometry on vehicles with 3.5mm hinge pins. Commonly used on the RC8B3 and RC8T3 series, these lightweight spacers are also compatible with other platforms that accept 3.5mm hinge pins. ✅ Pack of 10 high-precision spacers✅ Size: 7.8mm OD x 3.5mm ID x 0.5mm thick✅ Blue anodized aluminum – lightweight and corrosion-resistant✅ Used for fine-tuning wheelbase and hub spacing✅ Compatible with RC8B3, RC8T3, and any vehicle using 3.5mm hinge pins✅ Also available in 1.0mm and 2.0mm thicknesses (sold separately) 📦 Includes: (10) 7.8x3.5x0.5mm Blue Aluminum Hub Spacer Washers Part #: 31387 💡 Pro Tip: Stack different thicknesses to get the exact rear end length or toe-in setup you're after.

Read more less

RPM Extra Wide Front Bumper (Black) – RPM80042 Front-End Armor for Your Associated RideThe RPM Extra Wide Front Bumper is built for drivers who don’t hold back. With a full 6 inches of durable protection, this upgrade guards your chassis during head-on impacts and hard landings — perfect for bashing, racing, or rough terrain adventures. ✅ Features: 📏 6-inch width for maximum front-end coverage 🧱 High-strength RPM nylon absorbs big hits without cracking 🏁 Reinforced ribs double as skid rails for gliding over obstacles 🛬 Extra protection from hard landings and crash damage ⚙️ Direct fit for popular Associated models with no hassle 📦 Includes: (1) RPM Extra Wide Front Bumper (Black) 📊 Specifications: Material: RPM nylon composite Width: 6 in Color: Black Compatibility: Fits vehicles using Associated bulkheads #91359, #91364, or #9562 Compatible Models: Team Associated Trophy Rat Pro2 RT10SW RB10 B5 T5 Whether you bash or race, the RPM Extra Wide Front Bumper adds serious protection where it counts. Don’t just survive impacts — dominate them. 💥

Read more less

Team Associated RC10B7 FT Ballstud Mount, Black Aluminum – ASC92478 Factory-Precision Suspension Mount for the RC10B7 The Factory Team Standard Height Ballstud Mount is a durable, performance-focused upgrade for your RC10B7 platform. Crafted from CNC-machined aluminum and finished in stealth black, it delivers consistent rear camber link geometry with improved strength and tuning potential. ⚙️ Features: ✅ Standard Height – Maintains factory camber link geometry ✅ CNC-Machined Aluminum – Lightweight and built to last ✅ Black Anodized Finish – Sleek and stealthy Factory Team look ✅ Reliable Upgrade – Improves rear-end durability and tuning flexibility 📦 Includes: (1) Black Aluminum Ballstud Mount (Standard Height) Mounting hardware ✅ Compatibility: Team Associated RC10B7 Team Associated RC10B7 🏁 A must-have for racers seeking durable, factory-style performance with a sleek, blacked-out look.

Read more less

Team Associated RC10B74.2 Center Bulkhead & Brace Set (Decoupled Slipper) – ASC92378 Essential Support for Decoupled Slipper Installations Upgrade or replace with confidence using the Center Bulkhead and Brace Set designed specifically for the RC10B74.2 when equipped with the Factory Team Decoupled Slipper system. This set ensures precise fitment and rigidity where it matters most, helping maintain drivetrain alignment and chassis stability under racing conditions. ⚙️ Features: ✅ Designed for Decoupled Slipper Configuration ✅ Strong and Lightweight – Keeps driveline secured under high load ✅ Direct Fit for RC10B74.2 ✅ Factory Team Grade Components 📦 Includes: (1) Center Bulkhead (1) Center Brace ✅ Compatibility: Team Associated RC10B74.2 Works in conjunction with: ASC92377 – Servo Mount Set (Decoupled Slipper) ASC92379 – FT Decoupled Slipper Kit 🛠️ A must-have component for racers running the decoupled slipper—engineered to support performance and reliability!

Read more less

Team Associated FT Center CVA Bone 45.5mm (for Decoupled Slipper) – ASC92371 Factory-Grade Drivetrain Performance The 45.5mm Factory Team Center CVA Bone is designed for use with the RC10B74.2 and B74.2D when equipped with the FT Decoupled Slipper system. This lightweight and durable center bone provides smooth and efficient power transfer, helping reduce rotational mass for optimized drivetrain performance in 13.5T class racing. ⚙️ Features: ✅ 45.5mm Length – Perfect fit for use with the FT Decoupled Slipper system ✅ Precision Machined – Ensures smooth operation and tight tolerances ✅ Lightweight Design – Reduces rotational mass for faster acceleration ✅ Factory Team Quality – Built for competition use 📦 Includes: (1) 45.5mm Center CVA Bone ✅ Compatibility: Team Associated RC10B74.2 Team Associated RC10B74.2D Use with ASC92367 FT Decoupled Slipper Outdrive 🔁 Ideal for racers running the lightweight driveline setup—maximize performance and consistency on the track!

Read more less

Team Associated FT Decoupled Slipper Spring – ASC92369 Precision Tuning for Decoupled Slipper Setups The Factory Team Decoupled Slipper Spring is specifically designed for use with the RC10B74.2 FT Decoupled Slipper Outdrive system. It provides the optimal preload and compression characteristics needed to fine-tune your decoupled slipper clutch for consistent, race-ready performance. ⚙️ Features: ✅ Precision-Calibrated Spring – Matches the performance needs of the FT Decoupled Slipper ✅ Factory Team Quality – Built for durability and consistent response ✅ Improved Slipper Feel – Enhances tuning range for racers demanding control 📦 Includes: (1) Decoupled Slipper Spring ✅ Compatibility: Team Associated RC10B74.2 Team Associated RC10B74.2D Use with ASC92367 FT Decoupled Slipper Outdrive 🛠️ A must-have for racers utilizing the decoupled slipper system to push their B74.2 to the limit.

Read more less

Team Associated FT Decoupled Slipper Outdrive w/ One-Way – ASC92367 Decoupled Control. Tuned Performance. Upgrade your RC10B74.2 with the Factory Team Decoupled Slipper Outdrive, featuring an integrated one-way bearing. This option allows the front drivetrain to coast during off-throttle moments, improving corner entry stability and overall drivability—especially beneficial on high-bite surfaces. ⚙️ Features: ✅ One-Way Bearing Design – Allows the front end to freewheel when off throttle ✅ Decouples Braking Force – Rear-focused braking for improved cornering balance ✅ CNC-Machined Precision – Factory Team quality and durability ✅ Designed for serious 4WD racers looking to fine-tune handling characteristics 📦 Includes: (1) Decoupled Slipper Outdrive w/ Integrated One-Way Bearing ✅ Compatibility: Team Associated RC10B74.2 Team Associated RC10B74.2D 🧩 Ideal for racers aiming to extract maximum tuning potential from their 4WD buggy platform.

Read more less

Team Associated FT Carbon Fiber Front Suspension Arms – ASC92297 Precision Performance for RC10B74.1 & B74.1D Upgrade your B74.1's front end with these Factory Team Carbon Fiber Front Suspension Arms, engineered for lightweight strength and high-traction performance. These arms deliver sharper, more stable handling, especially in fast corners and on high-grip tracks. ⚙️ Features: ✅ Carbon Fiber Construction – Extreme rigidity for responsive steering and stability ✅ 12% Lighter than “hard” material arms ✅ Boosted Durability – Significantly stronger than standard “hard” arms ✅ Factory Team quality for competition-level performance 📦 Includes: (1) Left Front Carbon Suspension Arm (1) Right Front Carbon Suspension Arm ✅ Compatibility: Team Associated RC10B74.1 Team Associated RC10B74.1D 🔧 Perfect for racers seeking precision handling and reduced unsprung weight.

Read more less

Team Associated FT 3x35mm V2 TiN Shock Shafts – ASC91623 High-Performance Titanium Nitride Shock Shafts for #91579 Upgrade your suspension system with the 3x35mm Factory Team V2 TiN Shock Shafts, designed for use with #91579 truck rear shock bodies. Featuring a durable Titanium Nitride (TiN) coating, these shafts reduce friction and wear, delivering smoother and more consistent shock performance. ⚙️ Features: ✅ TiN coating for enhanced durability and ultra-smooth operation ✅ Screw-mounted piston design for secure, reliable assembly ✅ V2 shock shaft spec for modern Team Associated platforms 📦 Includes: (2) 3x35mm V2 TiN Shock Shafts ✅ Compatibility: #91579 – Truck Rear Shock Bodies Not compatible with E-clip pistons 🏁 Trusted Factory Team engineering — made to withstand the rigors of high-performance RC racing.

Read more less

Team Associated FT 3x21mm V2 Chrome Shock Shafts – ASC91616 Precision Replacement for Ultra-Smooth Suspension The Factory Team 3x21mm V2 Chrome Shock Shafts are designed as high-quality replacements for use with the #91576 V2 shock bodies. Built with durability and performance in mind, these shafts feature a chrome finish to reduce friction and wear—delivering smooth and consistent suspension action on every run. ⚙️ Features: ✅ Chrome-plated for reduced friction and long wear life ✅ Factory Team quality for high performance ✅ Designed for use with V2 shock bodies ✅ Direct fit for #91576 📦 Includes: (2) 3x21mm V2 Chrome Shock Shafts ✅ Compatibility: Fits #91576 V2 Shock Bodies Vehicles using #91576 shocks (check vehicle manual for confirmation) 🏁 Keep your suspension running smooth and race-ready with Factory Team precision!

Read more less

Team Associated RC10B7 FT Adjustable KPI Set – ASC92479 Fine-Tune Your Front End for Any Track Condition The Factory Team Adjustable KPI (KingPin Inclination) Set gives you race-proven steering geometry flexibility for your RC10B7. Originally featured on prototype models, this advanced tuning option is now available to all racers looking to optimize handling for different surfaces—from low-grip dirt to high-traction clay or carpet. ⚙️ Features: ✅ Precision adjustable KPI set for RC10B7 ✅ Nine distinct KPI settings for optimal tuning range ✅ Includes 3mm and 4mm trailing steering blocks ✅ Enhance corner entry, steering feel, and overall stability ✅ Factory Team engineered for high-level performance 📦 Includes: (2) Adjustable KPI Steering Blocks (1) 3mm Trailing Block Set (1) 4mm Trailing Block Set (Kit Default) Supplement with setup steps and KPI values ✅ Compatibility: RC10B7 🏁 Elevate your steering control and tailor your B7 to any surface with this ultimate front-end tuning kit!

Read more less

Team Associated RC10B7 HD Ball Differential Outdrive Set – ASC92453 Heavy Duty Upgrade for Peak Performance The HD Ball Differential Outdrive Set is a direct replacement for your Team Associated RC10B7, designed to handle the demands of competitive racing. Built for durability and strength, these outdrives are ideal for racers who push their 1/10 scale buggies to the limit. ⚙️ Features: ✅ Heavy duty design for improved durability ✅ Compatible with the RC10B7 ball differential ✅ Precision machined for smooth operation ✅ Essential upgrade for high-stress racing conditions 📦 Includes: (1) Left HD Ball Differential Outdrive (1) Right HD Ball Differential Outdrive ✅ Compatibility: RC10B7 🏁 Strengthen your drivetrain and stay in the race longer with this premium Factory Team upgrade.

Read more less

Team Associated RC10B74.2 FT Lightweight Driveline Center Kit – ASC92372 Maximize Efficiency. Minimize Rotational Mass. Take your RC10B74 to the next level with the Factory Team Lightweight Center Driveline Kit. Designed specifically for 13.5T Spec class racing, this kit reduces rotational mass by an impressive 19.3g compared to the standard steel setup—resulting in quicker acceleration and improved handling. ⚙️ Features: ✅ Reduces center driveline mass by 19.3g ✅ Includes lightweight dogbones and aluminum outdrives ✅ Plastic blade inserts reduce metal-to-metal wear ✅ Designed for use with center differential (not slipper) ✅ Ideal for 13.5T Spec racing class 📦 Includes: Lightweight center dogbones Aluminum outdrives Plastic blade inserts Complete hardware for installation ✅ Compatibility: RC10B74 RC10B74.1 RC10B74.1D RC10B74.2 RC10B74.2D ⚠️ Note: Not recommended for modified racing or use with slipper clutch systems. 🏁 Built for racers chasing every gram of performance advantage.

Read more less

Team Associated RC10B74.2 FT Center Dogbone Outdrives – Aluminum – ASC92359 Engineered for Lightweight Speed and Precision. These Factory Team Aluminum Center Dogbone Outdrives are a direct upgrade for the RC10B74 series, designed to be used with the FT Lightweight Driveline Center Kit (#92372). Precision CNC-machined for reduced rotating mass and maximum drivetrain efficiency. 🔧 Features: ✅ Lightweight aluminum construction ✅ CNC-machined for accuracy and durability ✅ Designed for high-performance racing applications ✅ Works with #92372 Lightweight Driveline Kit 📦 Includes: (2) Aluminum Center Dogbone Outdrives ✅ Compatibility: RC10B74 RC10B74.1 RC10B74.1D RC10B74.2 RC10B74.2D Designed for use with ASC92372 FT Lightweight Driveline Ki 🏁 Perfect for racers seeking reduced driveline weight and increased efficiency on the track!

Read more less

Team Associated RC10B74.2 Factory Team Aluminum Center Differential Outdrives (2) – ASC92358 Lightweight Strength for Serious Performance. Upgrade your driveline with these Factory Team Aluminum Center Differential Outdrives, designed specifically for the B74.2 Lightweight Center Driveline Kit (ASC92372). Machined from high-quality aluminum, these outdrives reduce rotational mass while maintaining the strength needed for competitive racing. 🔧 Features: ✅ CNC-machined aluminum construction ✅ Lightweight for improved acceleration ✅ High-strength upgrade over stock components ✅ Precision fit for the B74.2 driveline 📦 Includes: (2) Aluminum Center Differential Outdrives ✅ Compatibility: RC10B74.2 RC10B74.2D Compatible with B74.2 Lightweight Center Driveline Kit (ASC92372) 🏁 Shed weight and gain efficiency—perfect for racers looking to optimize their drivetrain!

Read more less

Team Associated 3.5x44.5mm TiN Rear Shock Shafts (2) Durability Meets Smooth Performance. These 3.5x44.5mm Titanium Nitride-coated rear shock shafts are precision replacements designed for the Team Associated RC8T4 and RC8T4e vehicles. Built to withstand the rigors of 1/8-scale racing, they deliver smooth shock movement and enhanced durability. 🔧 Features: ✅ Titanium Nitride (TiN) Coated for reduced friction and extended wear life ✅ High-Precision Fitment ensures optimal shock performance ✅ 3.5mm Diameter, 44.5mm Length — rear shock compatibility ✅ Built for RC8T4 & RC8T4e Team Associated vehicles 📦 Includes: (2) 3.5x44.5mm TiN Rear Shock Shafts 🏁 Reinforce your rear suspension with Factory Team reliability and proven performance!

Read more less

Team Associated RC10B7 Factory Team Titanium Top Shaft Screw – Lightweight Strength for Maximum Acceleration! 🔩 Give your RC10B7 or RC10B7D the performance edge with the Team Associated Factory Team Titanium Top Shaft Screw!This ultra-lightweight titanium screw reduces rotating mass, helping to boost acceleration and throttle response — a small upgrade that makes a big difference on the track. ✨ Key Features: 🔩 Titanium Construction – Strong, durable, and extremely lightweight 💨 Reduces Rotating Mass – Improves acceleration and throttle response 🔧 Direct Fit Upgrade – Perfect replacement for the stock top shaft screw 🏁 Factory Team Quality – Trusted performance from Team Associated’s championship-winning engineering 📦 Includes: ✔ (1) Titanium Top Shaft Screw 📦 Compatibility: ✅ Team Associated RC10B7 ✅ Team Associated RC10B7D 📌 Note: 🔹 Recommended for racers looking to reduce drivetrain weight and gain a performance advantage.🔹 Direct replacement for stock steel top shaft screw. 🏁 Fine-tune your drivetrain for faster acceleration with the Factory Team Titanium Top Shaft Screw! 🔥 Lighten your setup and race ahead with Team Associated Factory Team upgrades! 🔥

Read more less

Team Associated RC10B7 6.5mm Aluminum Front Axles (2) – Lightweight Strength for Precision Racing! 🔩 Refresh your buggy’s front-end performance with the Team Associated RC10B7 6.5mm Aluminum Front Axles!Designed as a direct replacement for the RC10B7, these lightweight aluminum axles reduce rotating mass for quicker acceleration and sharper handling without sacrificing durability. ✨ Key Features: 🔩 Lightweight 6.5mm Aluminum Construction – Reduces unsprung weight for faster response and improved handling 🏁 Direct Replacement Design – Perfect fit for Team Associated RC10B7 🛡️ Durable and Race-Ready – Built to withstand the rigors of competitive off-road racing 🔧 Precision Machined – Ensures smooth performance and proper fit with your hubs and bearings 📦 Includes: ✔ (2) 6.5mm Aluminum Front Axles 📦 Compatibility: ✅ Team Associated RC10B7 ✅ Team Associated RC10B7D ✅ Team Associated DC10 Drift Car 📌 Note: 🔹 Use with standard RC10B7 hub assemblies.🔹 A great upgrade for racers looking to shave weight and enhance steering precision. 🏁 Boost your buggy’s front-end performance with the Factory Team Aluminum Front Axles! 🔥 Race lighter and faster with the quality you expect from Team Associated! 🔥

Read more less

Team Associated RC10B7 Factory Team Carbon Fiber Front Wing Button – Lightweight Strength with Factory Style! 🛞 Upgrade your RC10B7 or RC10B7D’s aerodynamics and appearance with the Team Associated Factory Team Carbon Fiber Front Wing Button!Crafted from premium carbon fiber, this lightweight yet durable wing button provides a secure hold for your front wing, enhancing stability, reducing weight, and giving your buggy a true Factory Team look. ✨ Key Features: 🛞 High-Quality Carbon Fiber Construction – Combines lightweight performance with exceptional strength 🔧 Secure Front Wing Mounting – Keeps your wing firmly in place for consistent aerodynamics 💨 Reduces Overall Vehicle Weight – Shaves grams without compromising durability 🏁 Precision Fit for Factory Team Performance – Designed specifically for the RC10B7 and RC10B7D platforms 🎨 Sleek Factory Team Appearance – Adds a professional, race-ready finish to your setup 📦 Includes: ✔ (1) Factory Team Carbon Fiber Front Wing Button 📦 Compatibility: ✅ Team Associated RC10B7 ✅ Team Associated RC10B7D 📌 Note: 🔹 Direct replacement for stock plastic wing buttons.🔹 Use with standard RC10B7 wing mounting hardware. 🏁 Upgrade to Factory Team precision with the lightweight Carbon Fiber Front Wing Button! 🔥 Secure your wing, lower your weight, and race with style — Team Associated Factory Team quality you can trust! 🔥

Read more less

Team Associated RC10B7 Factory Team Steel Universal Driveshaft Set (69mm) – Smoother Power Delivery, Race-Ready Durability! 🚗 Boost your RC10B7 or RC10B7D’s drivetrain performance with the Team Associated Factory Team Steel Universal Driveshaft Set!These 69mm steel universals are specifically designed to reduce mechanical bind, ensuring smoother power transfer, better handling, and improved durability on the toughest tracks. ✨ Key Features: 🔩 Heavy-Duty Steel Construction – Built for maximum strength and long-lasting durability 🔧 Reduces Mechanical Bind – Ensures smoother drivetrain performance and improved cornering 🏁 Optimized for Racing – Helps deliver consistent handling in high-traction and rough conditions 🛡️ Official Factory Team Upgrade – Trusted quality from Team Associated’s championship pedigree 📦 Includes: ✔ (2) 69mm Steel Universal Driveshafts 📦 Compatibility: ✅ Team Associated RC10B7 ✅ Team Associated RC10B7D 📌 Note: 🔹 Direct replacement for stock parts.🔹 Recommended for racers seeking smoother, more efficient drivetrain performance. 🏁 Upgrade your RC10B7 or B7D with the Factory Team Universal Driveshaft Set and drive smoother, faster, and with more confidence! 🔥 Precision-engineered for serious racers by Team Associated! 🔥

Read more less

Team Associated Factory Team RC10B7 FT Steering Block Mount Set – Precision Handling Upgrade! 🔧 Enhance your RC10B7 or RC10B7D’s steering performance with the Team Associated Factory Team RC10B7 FT Steering Block Mount Set!Crafted from high-quality aluminum, these mounts are designed for use with the Factory Team Adjustable KPI Set (ASC92479), delivering superior durability and sharper steering response for competitive racing. ✨ Key Features: 🔩 CNC-Machined Aluminum Construction – Provides exceptional strength and durability 🏁 Designed for Adjustable KPI Tuning – Works perfectly with the Factory Team Adjustable KPI Set (ASC92479) 🔧 Precision Fit for Factory Team Performance – Improves steering accuracy and responsiveness 🛡️ Official Team Associated Factory Team Upgrade – Race-proven quality and reliability 📦 Compatibility: ✅ Team Associated RC10B7 ✅ Team Associated RC10B7D 📌 Note: 🔹 Compatible only with vehicles equipped with the Factory Team Adjustable KPI Set (ASC92479).🔹 Includes two aluminum steering block mounts. 🏁 Maximize your steering precision with the Factory Team RC10B7 FT Steering Block Mount Set! 🔥 Upgrade today and experience superior handling and durability from Team Associated! 🔥

Read more less

Team Associated Factory Team RC10B7 FT Rear Inverted Shock Standoff Set – Race-Ready Suspension Upgrade! 🔧 Upgrade your rear suspension with the Team Associated Factory Team RC10B7 FT Rear Inverted Shock Standoff Set!Specifically engineered for the RC10B7 and RC10B7D platforms, this precision-machined Factory Team component provides greater durability and improved tuning options for racers demanding peak performance. ✨ Key Features: 🔩 Precision-Machined Components – Delivers accurate and secure shock mounting 🏁 Optimized Rear Suspension Setup – Designed for inverted shock mounting to improve traction and handling 🛡️ Factory Team Quality – Built tough for high-intensity racing conditions 🔧 Official Team Associated Upgrade – Trusted performance from a race-winning brand 📦 Compatibility: ✅ Team Associated RC10B7 ✅ Team Associated RC10B7D 📌 Note: 🔹 Official Factory Team (Team Associated) Upgrade Part🔹 Check your vehicle manual for installation details and tuning tips 🏁 Dominate the competition with Team Associated precision and Factory Team durability! 🔥 Equip your RC10B7 or RC10B7D with the Rear Inverted Shock Standoff Set and feel the difference on the track! 🔥

Read more less

Overview:Upgrade your suspension durability and precision with the Team Associated RC10B7 Aluminum Arm Mount "D Block". Machined from high-quality aluminum, this mount improves rigidity in the rear suspension assembly, keeping your hinge pins firmly aligned under heavy loads. It’s a race-proven upgrade that enhances consistency, handling, and longevity compared to the stock composite part. Features: CNC-machined aluminum construction for superior strength Maintains precise hinge pin alignment for consistent handling Blue anodized finish for durability and Factory Team looks Direct replacement upgrade for the stock “D Block” Genuine Team Associated Factory Team component Compatibility: Team Associated RC10B7 1/10 2WD Buggy May also fit other B7-based platforms (check manual for details) Includes: (1) Aluminum Arm Mount "D Block" Part Number: 92433 ⚡ Pro Tip: Combine the Aluminum Arm Mount "D Block" with the B7 Factory Team Arm Mount Inserts (92434) to unlock fine-tuned rear suspension geometry options.

Read more less

Team Associated RC10B7/RC10B7D Laydown Gearbox – Precision Replacement for 2WD Performance! 🔧 Keep your buggy in top form with this genuine replacement Laydown Gearbox Housing for the Team Associated RC10B7 and RC10B7D. Designed specifically for the 2WD platform, this gearbox delivers the durability, fit, and reliability you expect from Team Associated — straight from the Factory Team lineup. ⚙️ Key Features: ✅ Official Team Associated replacement part✅ Designed for laydown transmission configuration✅ Ensures proper gear mesh and alignment✅ Molded for durability and exact fitment✅ Ideal for maintenance, rebuilds, or spares 📦 Includes: (1) Laydown Gearbox Housing ✅ Compatibility: Team Associated RC10B7 Team Associated RC10B7D 💡 Maintain top-tier performance with factory-spec reliability.Team Associated—trusted by champions. 🏁🔩

Read more less

Team Associated RC10B7 Differential Height Inserts. These replacement differential height adjustment inserts are intended for the Team Associated RC10B7 1/10 buggy. Package includes four inserts. COMPATIBILITY: Team Associated RC10 B7 OriginalTeam Associated RC10 B7D

Read more less

The Team Associated RC10B74.1 Factory Team "Carbon" Side Rails are an optional upgrade for the Team Associated RC10B74 series models. These carbon fiber composite option parts are impregnated with rigid and light carbon fibers inside the injection molded material to create a lighter, more durable part with optimized rigidity to create the ultimate high performance composite part.Features: Lightweight: Approximately 12% weight savings over “hard” material. Extreme Rigidity: More predictable handling in high traction applications and increased vehicle stability in fast corners. Improved Durability: Significantly improved strength over “hard” option parts. COMPATIBILITY: Team Associated RC10 B74 OriginalTeam Associated RC10 B74.1Team Associated RC10 B74.1DTeam Associated RC10 B74.2Team Associated RC10 B74.2D

Read more less

Restore smooth, reliable performance to your RC10B6 with the Team Associated Ball Differential Rebuild Kit. Featuring a caged thrust bearing for improved durability and easier assembly, this kit includes everything needed to refresh your ball diff for consistent traction and handling. ✅ Complete Rebuild Kit – All essential parts included for a full diff service✅ Caged Thrust Bearing – Easier assembly and longer-lasting performance✅ Direct OEM Replacement – Genuine Team Associated parts for perfect fitment✅ Race-Ready Reliability – Keeps your differential smooth and consistent under load Includes: Caged Thrust Bearing Diff Balls Diff Rings Hardware and components for rebuild Compatibility: Team Associated RC10B6 series vehicles (RC10B6, B6.1, B6.2, B6.3, B6.4) Check manual for exact fitment Part #: 91991  

Read more less

Team Associated RC10B74.1 Factory Team Carbon Fiber HT +0 Steering Block Arms are a tuning option to help make the steering less aggressive off center with a smoother turn-in feel. This helps improve drivability in high-traction conditions. Package includes two steering block arms.  COMPATIBILITY: Team Associated RC10 B74.1Team Associated RC10 B74.1DTeam Associated RC10 B74.2Team Associated RC10 B74.2D

Read more less

Team Associated 13mm Front Shock Spring. These replacement springs are intended for the Team Associated B6.4D, however, it will also work with the Team Associated B6.4 as a tuning option. Package includes two springs. Effects of Shock Spring Changes  Shock Spring  Characteristic  Softer Increased Chassis Roll Increased Traction Better in Bumpy Conditions More Likely to Bottom Out  Stiffer Decreased Chassis Roll Decreased Traction Increased Responsiveness COMPATIBILITY: Team Associated RC10 B74.2Team Associated RC10 B74.2DTeam Associated RC10B6.4Team Associated RC10B6.4D

Read more less

Team Associated 3.5x45mm Steel Turnbuckles. These are replacement rear camber link turnbuckles intended for the RC10B74.2 and B74.2D series of vehicles. Package includes two 3.5x45mm turnbuckles. COMPATIBILITY: Team Associated RC10 B74.2Team Associated RC10 B74.2D

Read more less

Team Associated RC10B74 Front/Rear Gear Differential Case – ASC92135🔩 Tough. Precise. Race Proven. Keep your drivetrain dialed with the Team Associated Gear Differential Case for the RC10B74. Whether you're rebuilding the front or rear, this high-quality replacement ensures smooth power delivery and long-lasting durability—right where it counts. 🛠 Features:✅ Fits front or rear differential on the RC10B74✅ Durable molded construction for reliable performance✅ Perfect for repairs, rebuilds, or spares✅ Factory Team original part 📦 Includes:• (1) Front/Rear Gear Differential Case 💡 Note:Looking for the center diff case? Use ASC92146. 🔢 Part Number: ASC92135🏆 Brand: Team Associated

Read more less

Team Associated Factory Team Rear Gearbox Pinion Height Inserts – RC10B74.2 Precision Tuning for Peak Gear Mesh Upgrade your drivetrain precision with the Factory Team Machined Rear Gearbox Pinion Height Inserts for the RC10B74.2 and B74.2D. These CNC-machined aluminum inserts allow fine-tuning of your pinion height, ensuring ideal mesh alignment when adjusting differential height settings. 🔩 Features: 🧰 Precision-machined aluminum construction 🎯 Adjustable pinion height ensures proper gear mesh 🔁 Ideal for setups that involve diff height tuning 🔧 Quick and easy installation 📦 Includes: (1) 0–3mm Pinion Height Insert (1) 1–2mm Pinion Height Insert ✅ Compatibility: Team Associated RC10B74.2 Team Associated RC10B74.2D 🛠️ Factory-level adjustment for competitive edge.

Read more less

The Team Associated RC10B74.1 Factory Team "Carbon" Rear Hubs are an optional upgrade for the Team Associated RC10B74.1 series models. These carbon fiber composite option parts are impregnated with rigid and light carbon fibers inside the injection molded material to create a lighter, more durable part with optimized rigidity to create the ultimate high performance composite part.Features: Lightweight: Approximately 12% weight savings over “hard” material. Extreme Rigidity: More predictable handling in high traction applications and increased vehicle stability in fast corners. Improved Durability: Significantly improved strength over “hard” option parts. COMPATIBILITY: Team Associated RC10 B74.1Team Associated RC10 B74.1D

Read more less

Team Associated B74.1 3 Pad Slipper Conversion (Part #92282)Upgrade your ride with the Team Associated 3 Pad Slipper Conversion – perfect for drivers seeking smoother, more forgiving throttle control. This conversion replaces the stock 2-pad setup with a 3-pad system using a larger 19mm I.D. pad and a softer spring, ideal for dirt and low-traction tracks. ✅ Smoother engagement✅ Better throttle feel✅ Includes instructions for easy install Compatibility: B74.1 B74.1D (requires ASC92275 slipper shaft outdrive set) B74.2 B74.2D B74.2 CE Swap it in and feel the difference where it counts – on the track!  

Read more less