Team Associated T6.1/SC6.1 Front Anti-Roll Bar Set [71128] 🌀 Dial in your handling with confidence! This Front Anti-Roll Bar Set is designed for the Team Associated T6.1 and SC6.1, helping reduce chassis roll and boost stability when the grip is high and the corners are tight. Whether you're fine-tuning for race day or upgrading for performance, this set has your front-end covered. ✅ Reduces chassis roll on high-traction tracks✅ Improves cornering response and overall stability✅ Works with Roll Bar Hardware Set ASC71134 (sold separately) Includes:• (1) 1.2mm White Front Anti-Roll Bar• (1) 1.3mm Gray Front Anti-Roll Bar• (1) 1.4mm Blue Front Anti-Roll Bar 📦 Part Number: 71128🏁 Brand: Team Associated

Read more less

Team Associated 13mm Front Shock Spring. These optional springs are intended for the Team Associated B6.4D and the B6.4. Package includes two springs. Effects of Shock Spring Changes  Shock Spring  Characteristic  Softer Increased Chassis Roll Increased Traction Better in Bumpy Conditions More Likely to Bottom Out  Stiffer Decreased Chassis Roll Decreased Traction Increased Responsiveness COMPATIBILITY: Team Associated RC10 B74.2Team Associated RC10 B74.2DTeam Associated RC10B6.4Team Associated RC10B6.4D

Read more less

This is a Team Associated "B" Arm Mount, intended for use with the Team Associated RC10 B74 Team 1/10 4WD Off-Road Electric Buggy to replace the kit supplied rear "B" Arm Mount. This contains one anodized blue arm mount. COMPATIBILITY: Team Associated RC10 B74 OriginalTeam Associated RC10 B74.1Team Associated RC10 B74.1DTeam Associated RC10 B74.2Team Associated RC10 B74.2D

Read more less

Team Associated Graphite Rear Hub Link Shim Set: RC10B74   ASC92185

Read more less

Stronger. Stiffer. Race-Ready. Upgrade your steering and camber links with the Team Associated 3.5x48 mm Steel Turnbuckles — a precision-built Factory Team option for racers who demand maximum strength and reliability. Perfect for high-stress race conditions, these heavy-duty steel links add confidence to every corner and landing. Performance Upgrade Designed to replace standard turnbuckles on the RC10B6, RC10T6, and RC10SC6 platforms, this 3.5 mm version provides added stiffness and durability when used with 3.5 mm ballcups (92308). The result is tighter handling, smoother steering response, and reduced flex over time — a must-have for competitive racers and bashers alike. Features: Heavy-duty 3.5 mm steel construction for extreme strength Increased stiffness for consistent steering geometry Works with 3.5 mm ballcups (#92308) Ideal upgrade for high-traction and high-impact racing Factory Team precision fit and finish Includes: (2) 3.5 × 48 mm Steel Turnbuckles Compatibility: Team Associated RC10 B6 series Team Associated RC10 T6 series Team Associated RC10 SC6 series Team Associated Factory Team — Engineered to Win.

Read more less

Team Associated Factory Team B6.4/B6.4D 3.5x48mm Titanium Turnbuckles. These are optional titanium turnbuckles intended for the Team Associated B6.4 and B6.4D platforms. Constructed from high quality titanium these offer increased durability over stock components. Package includes two 3.5x48mm turnbuckles. NOTE: 3.5mm Ballcups are required for installation (ASC92308). COMPATIBILITY: Team Associated RC10B6.4Team Associated RC10B6.4D

Read more less

Team Associated Factory Team 3.5mm Titanium Turnbuckle Set. This is an optional titanium turnbuckle set intended for the Team Associated B74.2 platform. Constructed from high quality titanium these offer increased durability over stock components and replace all the stock turnbuckles.Includes: (2) 3.5x45mm Titanium Turnbuckles (4) 3.5x42mm Titanium Turnbuckles (1) 3.5x35mm Titanium Turnbuckle COMPATIBILITY: Team Associated RC10 B74.2Team Associated RC10 B74.2D

Read more less

1UP Racing X-Gear 13mm Front & Rear Buggy Pro Pack Springs (Firm) (6) – 1UP10530 Upgrade your suspension tuning with the 1UP Racing X-Gear 13mm Front & Rear Buggy Pro Pack. Developed in partnership with X-Gear Co. of Japan, this set includes six precision-engineered firm springs for both the front and rear of your 1/10 scale buggy. Whether you're hitting rough tracks or carving tight corners, these springs deliver superior grip, stability, and control to give you the edge in any condition. Features: Designed in collaboration with X-Gear Japan for pro-level performance Improves grip, bump handling, and cornering control Optimized for smooth landings and consistent chassis behavior Covers a range of firm-rate spring options to fine-tune setup Tested by top drivers across various racing surfaces Includes:Front Springs (13mm) (2) 3X Hard / Pink (2) 4X Hard / Silver (2) 5X Hard / Orange Rear Springs (13mm) (2) Extra Hard / Blue (2) 2X Hard / Green (2) 3X Hard / Pink  

Read more less

Avid Oiler Pen | Empty [AV10135] Product Overview: The Avid Empty Oiler Pen gives you full control over your lubrication needs. Originally used for Avid Slip oil, this handy tool now comes empty—ready to be filled with your favorite lubricant. It features a precision 1" (25.4mm) long steel tip for clean and accurate application and holds up to 1/4oz (7.4cc) of fluid. A perfect companion for any RC tool kit or pit box. Features: Comes empty – fill with your preferred lubricant Precision 1" steel tip for controlled application Holds up to 1/4oz (7.4cc) of fluid Compact, pit-friendly size Includes: (1) Empty Avid Oiler Pen Part Number: AV-OIL-PEN

Read more less

🏁⚙️ Factory Team Carbon Upgrade for the 7-Series DrivetrainThe Team Associated Factory Team Carbon 3-Gear Gearbox is an optional drivetrain component designed for compatible RC10B7, RC10T7, and RC10SC7 platforms using the 3-gear transmission configuration. Its carbon-composite construction provides a lightweight, rigid gearbox option for race-focused builds. 🏁 About the Factory Team 3-Gear Gearbox⚙️ 3-Gear Transmission DesignDesigned specifically for Team Associated’s 3-gear transmission layout, this gearbox provides the housing needed for compatible 7-series drivetrain setups.🔧 Carbon-Composite ConstructionThe Factory Team gearbox uses carbon-composite material for a lightweight and rigid construction while maintaining proper drivetrain alignment.🏎️ Factory Team UpgradeIdeal for racers building, converting, or servicing a compatible Team Associated 7-series vehicle with the 3-gear gearbox configuration.✨ Features✔ Factory Team carbon-composite construction✔ Designed for 3-gear transmission configurations✔ Lightweight and rigid gearbox design✔ Genuine Team Associated Factory Team component✔ Designed for compatible RC10 7-series platforms📦 Includes (1) Team Associated Factory Team Carbon 3-Gear Gearbox Set🔧 Compatibility Team Associated RC10B7 Team Associated RC10B7.1 Team Associated RC10T7 Team Associated RC10SC7 📝 Notes This is the Factory Team carbon-composite version of the 3-gear gearbox. Verify your vehicle is configured for the compatible 3-gear transmission setup before installation.  

Read more less

🏁⚙️ Strength, Precision & a Clean Race-Ready LookThe J&T Bearing Co. Titanium "Milled" XD Turnbuckle Set is a premium upgrade designed specifically for the 2025 XRAY XB2 Carpet and Dirt platforms. Made from high-quality Grade 5 titanium, these turnbuckles combine increased strength and durability with a sleek milled design that gives your buggy a sharp, finished appearance.🏁 About the Titanium "Milled" XD Turnbuckles💪 Reinforced for RacingThe XD design features a reinforced 4mm center for increased durability compared to standard finned-style turnbuckles, making them well suited for the demands of competitive racing.🔧 Milled Titanium ConstructionEach turnbuckle features a 3.5mm milled center that tapers down for a clean, timeless look. Grade 5 titanium construction provides an excellent combination of strength and lightweight performance.⚙️ Stock-Style ThreadingStandard right and left-hand threads allow the turnbuckles to work with the stock rod ends. A 1/8" drill bit is included for modifying the standard rod ends if required for proper fitment.✨ Features✔ Grade 5 titanium construction✔ Reinforced 4mm center for increased durability✔ 3.5mm milled center design✔ Standard right and left-hand threads✔ Compatible with stock rod ends✔ 1/8" drill bit included for rod end modification if needed✔ Black finish✔ Designed specifically for the 2025 XRAY XB2📦 Includes (1) XRAY XB2 '25 Titanium "Milled" XD Turnbuckle Set (1) 1/8" Drill Bit🔧 Compatibility XRAY XB2 2025 Carpet XRAY XB2 2025 Dirt📝 Notes Stock rod ends may require modification using the included 1/8" drill bit. Vehicle and other components are sold separately.  

Read more less

The Revolution Design Aluminum Clamping Servo Horn is a precision steering upgrade designed for the XRAY XB2 platform. Machined from high-quality 7075 aluminum, this lightweight and durable servo horn features a secure clamping design to minimize play and provide precise, consistent steering response. About the Aluminum Clamping Servo Horn Precision Steering Upgrade The clamping design provides a tight, secure fit on compatible 23T servo splines, helping reduce unwanted play in the steering system. High-strength 7075 aluminum construction delivers excellent rigidity without unnecessary weight.A silver chamfer and laser-etched RDRP logo complete the premium race-inspired appearance. Features ✔ High-quality 7075 aluminum construction✔ 23T servo spline✔ Designed for Hitec and Sanwa servo applications✔ Secure clamping design✔ Helps reduce steering play✔ Lightweight and extremely strong✔ Silver chamfer detailing✔ Laser-etched RDRP logo✔ Designed for precise steering response Includes (1) Revolution Design Aluminum Clamping Servo Horn Specifications Specification Details Brand Revolution Design Part Number RDRP-0665 Product Type Clamping Servo Horn Material 7075 Aluminum Spline 23T Servo Compatibility Hitec / Sanwa Quantity 1 Compatibility Compatible with: XRAY XB2 Original XRAY XB2 2024 Carpet XRAY XB2 2024 Dirt XRAY XB2 2025 Carpet XRAY XB2 2025 Dirt Notes Designed for compatible 23T servo splines. Verify your servo spline count before installation. Servo and vehicle are sold separately.

Read more less

The Pro-Motion Fury 2.2" Wide 2WD Front LP Buggy Tires are designed for high-performance carpet and turf racing. Featuring a low-profile wide carcass and Pro-Motion's C5 Super Soft compound, the Fury delivers responsive steering, predictable handling, and consistent grip for competitive 1/10 scale 2WD buggy applications. The low-profile construction helps minimize sidewall deflection, providing increased stability and control through fast transitions and technical corners. About the Fury Front Buggy Tires Grip & Stability The Fury uses pyramid-shaped tread pins positioned across the tire to provide strong grip while promoting consistent wear throughout the life of the tire. Its low-profile carcass reduces unwanted sidewall movement, helping the buggy remain stable and predictable during aggressive direction changes. Smooth Steering Response Outer tread wedges begin with a smaller profile and gradually widen toward the sidewall. This design provides responsive steering and cornering grip without creating an overly edgy or unpredictable front-end feel. C5 Super Soft Compound This version features Pro-Motion's C5 Super Soft compound for high-grip carpet and turf racing applications. Features ✔ Designed for 1/10 scale 2WD buggy front applications✔ C5 Super Soft compound✔ 2.2" Wide LP design✔ Low-profile carcass for improved stability✔ Reduced sidewall deflection✔ Pyramid-shaped tread pins✔ Designed for consistent, long-lasting grip✔ Outer wedges provide smooth steering response✔ Precise and predictable cornering✔ Designed for carpet and turf surfaces✔ Foam inserts included Includes (2) Pro-Motion Fury 2.2" Wide 2WD Front LP Buggy Tires – C5 Super Soft (2) Foam Inserts Specifications Specification Details Brand Pro-Motion Part Number PMT3085-C5 Product Fury Scale 1/10 Position Front Vehicle Type 2WD Buggy Wheel Diameter 2.2" Carcass Wide Low-Profile (LP) Compound C5 – Super Soft Surface Carpet / Turf Inserts Foam Notes Tires are supplied unmounted. Designed for compatible 2.2" Wide LP 2WD buggy front wheels. Foam inserts are included. Wheels and tire glue are sold separately.

Read more less

The Team Exalt Gen-X Gold Spec 13.5T Competition Brushless Motor is engineered for racers looking for precise, consistent, and efficient power delivery. Built around an in-house designed stator, precision-balanced rotor, ceramic bearings, and a high-accuracy sensor system, the Gold Spec is designed to deliver predictable performance throughout demanding race conditions. Each Gold Spec motor receives hand-selected stator and rotor components, ≤1.0° sensor deviation, and individual Motolyser tuning with a performance printout, providing racers with a verified, race-ready motor. About the Gen-X Gold Spec Precision-Built Competition Performance The Gold Spec's in-house designed stator is optimized to produce strong torque while maintaining stable RPM and legal performance limits for sanctioned racing. A precision-balanced 12.5mm rotor works with ceramic bearings to reduce friction while providing crisp mid-range punch, clean throttle response, and consistent performance. Hand-Selected & Motolyser Tuned Gold Spec motors receive specialized attention during assembly, including selection of top-tier stator and rotor components. Each motor is built with ≤1.0° sensor deviation and individually Motolyser tuned. A performance printout is included to provide verified data for the specific motor. Advanced Cooling & Sensor Accuracy Integrated cooling channels and a rigid motor can structure help manage temperatures during longer races. A high-accuracy sensor system maintains clean communication between the motor and ESC for consistent throttle response from the beginning of the race through the final lap. Features ✔ Competition-level 13.5T sensored brushless motor✔ ROAR approved✔ In-house designed stator✔ Precision-balanced 12.5mm rotor✔ Ceramic bearings for reduced friction✔ Strong torque with stable RPM performance✔ Crisp mid-range power delivery✔ Advanced cooling channels✔ Rigid motor can construction✔ High-accuracy sensor system✔ Hand-built with selected stator and rotor components✔ ≤1.0° sensor deviation✔ Individually Motolyser tuned✔ Performance printout included Includes (1) Team Exalt Gen-X Gold Spec 13.5T Competition Brushless Motor (1) Sensor Cable (1) Motolyser Performance Printout Specifications Specification Details Brand Team Exalt Part Number EXAG135GS2 Series Gen-X Gold Spec Motor Type Sensored Brushless Turns 13.5T Input Voltage 2S Pole/Slot 2 Rotor Diameter 12.5mm Shaft Diameter 3.175mm (1/8") Bearings Ceramic Sensor Deviation ≤1.0° ROAR Approved Yes Notes Designed for competitive RC racing applications. Each Gold Spec motor is individually Motolyser tuned and supplied with a performance printout. Verify the motor and ESC requirements for your specific racing class or sanctioning organization before competition use.

Read more less

The Hobbywing XR10 Pro G3X Stock Spec ESC and V10 G5 21.5T Torque Motor Combo delivers a complete competition power system designed specifically for 1/10 scale stock class racing. Combining the highly tunable XR10 Pro G3X Stock Spec ESC with Hobbywing's V10 G5 sensored brushless motor, this combo provides precise throttle control, efficient power delivery, advanced thermal management, and extensive setup adjustability. This version includes the 21.5T TORQUE motor, providing racers with a competition-focused option for classes requiring a 21.5-turn motor. About the XR10 Pro G3X & V10 G5 Combo Precision Stock Spec ESC The XR10 Pro G3X Stock Spec ESC is engineered for competitive stock racing with refined throttle and braking control. Multiple selectable profiles can be customized, renamed, and saved for different track conditions and racing classes. Adjustable PWM and brake frequencies allow racers to fine-tune throttle feel and braking force, while Hobbywing's Softening function provides additional control over power delivery and drivability. V10 G5 21.5T Torque Motor The included V10 G5 21.5T sensored brushless motor is built to competition standards with an emphasis on power, efficiency, and consistent performance. This TORQUE version provides strong, controllable power delivery while retaining the extensive tuning capabilities of the V10 G5 platform. Advanced Motor Cooling An exposed winding design and patented rotor cooling system help dissipate heat during demanding racing conditions. Lightweight construction and an optimized center of gravity help reduce unnecessary weight while contributing to improved vehicle balance and handling. Race-Level Tunability Adjustable Hall timing and sensing distance allow racers to fine-tune motor response to suit different track layouts and driving styles. The motor's modular construction allows easier servicing, while the ESC provides external programming and accessory ports along with built-in data logging for additional setup and performance analysis. Features ✔ Complete competition ESC and motor combo✔ Designed for 1/10 scale stock racing✔ XR10 Pro G3X Stock Spec ESC✔ V10 G5 21.5T TORQUE brushless motor✔ Sensored brushless operation✔ 160A continuous ESC current✔ 1200A burst ESC current✔ 2S LiPo ESC operation✔ Adjustable 5-7.4V BEC✔ Multiple customizable ESC profiles✔ Adjustable PWM frequency✔ Adjustable brake frequency✔ Hobbywing Softening function✔ Built-in data logging✔ Comprehensive ESC protection systems✔ Adjustable motor Hall timing✔ Adjustable sensing distance✔ Exposed winding motor design✔ Patented rotor cooling system✔ Lightweight motor construction✔ Optimized center of gravity✔ Modular motor design for easier maintenance✔ ESC cooling fan included✔ Programmable ESC Includes (1) Hobbywing XR10 Pro G3X Stock Spec Sensored Brushless ESC (1) Hobbywing V10 G5 21.5T Torque Sensored Brushless Motor (1) Sensor Cable (1) Set of Wiring Leads (1) ESC Cooling Fan (1) Instruction Manual Needed to Complete (1) Compatible 2S LiPo Battery Battery and motor connectors as required Compatible vehicle and radio electronics Soldering and installation equipment as required Specifications Specification Details ESC Model XR10 Pro G3X Stock Spec Suggested Application 1/10 Motor Type Sensored Brushless Input Voltage 2S LiPo (7.4V) Continuous Current 160A Burst Current 1200A BEC Voltage 5-7.4V BEC Continuous Current 5A Dimensions 35.0 x 33.6 x 30.3mm (1.38 x 1.32 x 1.19") Weight 101.5g (3.58oz) Motor Connector Bare Wire Battery Connector Bare Wire Programmable Yes Motor Model V10 G5 Version Torque Turns 21.5T Suggested Application 1/10 Motor Type Sensored Brushless Motor Voltage 1S-3S Adjustable Timing Yes Connector Solder Tab Dimensions 35.8 x 51.9mm (1.41 x 2.04") Shaft Diameter 3.175mm (1/8") Weight 138g (4.87oz) Notes This combo includes the 21.5T TORQUE version of the Hobbywing V10 G5 motor. The XR10 Pro G3X Stock Spec ESC is designed for 2S LiPo operation. The V10 G5 motor itself is rated for 1S-3S operation; when paired with the included ESC, follow the ESC's 2S input requirements. Battery and motor connections are supplied as bare wire/solder tabs and may require soldering during installation. Verify applicable motor, ESC, timing, and boost rules for your specific racing class or organization.    

Read more less

The Hobbywing XR10 Pro G3X Stock Spec ESC and V10 G5 17.5T Torque Motor Combo delivers a complete competition power system engineered for 1/10 scale stock class racing. Pairing the highly tunable XR10 Pro G3X Stock Spec ESC with Hobbywing's V10 G5 sensored brushless motor, this combo provides precise throttle control, efficient power delivery, advanced cooling, and extensive tuning capability. This version includes the 17.5T TORQUE motor, giving stock-class racers a competition-focused setup with strong, controllable power delivery. About the XR10 Pro G3X & V10 G5 Combo Precision Stock Spec ESC The XR10 Pro G3X Stock Spec ESC is designed specifically for competitive stock racing, providing refined throttle and braking control with consistent power output. Multiple customizable profiles allow racers to tailor performance for different track conditions and classes. Adjustable PWM and brake frequencies provide additional control over throttle feel and braking response, while Hobbywing's Softening function helps improve drivability and efficiency. V10 G5 17.5T Torque Motor The included V10 G5 17.5T sensored brushless motor is built to competition standards with an emphasis on increased output, efficiency, and thermal performance. This TORQUE version provides a power-delivery option suited to racers looking for strong response while maintaining the adjustability and efficiency of the V10 G5 platform. Advanced Motor Cooling An exposed winding design and patented rotor cooling system help manage heat during demanding race conditions for more consistent performance throughout a run. The lightweight motor construction and optimized center of gravity also help improve overall vehicle balance and handling. Race-Level Tunability Adjustable Hall timing and sensing distance allow racers to fine-tune motor response to suit their driving style and track layout. The motor's modular construction simplifies maintenance, while the ESC offers external programming and accessory ports, customizable profiles, and built-in data logging for additional setup flexibility. Features ✔ Complete competition ESC and motor combo✔ Designed for 1/10 scale stock racing✔ XR10 Pro G3X Stock Spec ESC✔ V10 G5 17.5T TORQUE brushless motor✔ Sensored brushless operation✔ 160A continuous ESC current✔ 1200A burst ESC current✔ 2S LiPo ESC operation✔ Adjustable 5-7.4V BEC✔ Multiple customizable ESC profiles✔ Adjustable PWM frequency✔ Adjustable brake frequency✔ Hobbywing Softening function✔ Built-in data logging✔ Comprehensive ESC protection systems✔ Adjustable motor Hall timing✔ Adjustable sensing distance✔ Advanced motor cooling system✔ Exposed winding design✔ Patented rotor cooling system✔ Lightweight motor construction✔ Optimized center of gravity✔ Modular motor design for easier maintenance✔ ESC cooling fan included✔ Programmable ESC Includes (1) Hobbywing XR10 Pro G3X Stock Spec Sensored Brushless ESC (1) Hobbywing V10 G5 17.5T Torque Sensored Brushless Motor (1) Sensor Cable (1) Set of Wiring Leads (1) ESC Cooling Fan (1) Instruction Manual Needed to Complete (1) Compatible 2S LiPo Battery Battery and motor connectors as required Compatible vehicle and radio electronics Soldering and installation equipment as required Specifications Specification Details ESC Model XR10 Pro G3X Stock Spec Suggested Application 1/10 Motor Type Sensored Brushless Input Voltage 2S LiPo (7.4V) Continuous Current 160A Burst Current 1200A BEC Voltage 5-7.4V BEC Continuous Current 5A Dimensions 35.0 x 33.6 x 30.3mm (1.38 x 1.32 x 1.19") Weight 101.5g (3.58oz) Motor Connector Bare Wire Battery Connector Bare Wire Programmable Yes Motor Model V10 G5 Version Torque Turns 17.5T Suggested Application 1/10 Motor Type Sensored Brushless Motor Voltage 1S-3S Adjustable Timing Yes Connector Solder Tabs Dimensions 35.8 x 51.9mm (1.41 x 2.04") Shaft Diameter 3.175mm (1/8") Weight 138g (4.87oz) Notes This combo includes the 17.5T TORQUE version of the Hobbywing V10 G5 motor. The XR10 Pro G3X Stock Spec ESC is designed for 2S LiPo operation. The V10 G5 motor itself is rated for 1S-3S operation; when paired with this ESC, follow the ESC's 2S input requirements. Battery and motor connections are supplied as bare wire/solder tabs and may require soldering during installation. Verify applicable motor, ESC, timing, and boost rules for your specific racing class or organization.  

Read more less

The Team Losi Racing 10x14mm Shim Set is a genuine replacement and setup component for compatible TLR and Losi 22-series vehicles. This set includes both 0.1mm and 0.2mm thicknesses, allowing for precise spacing and adjustment during vehicle setup, maintenance, or rebuilding. About the TLR Shim Set Precision Setup & Adjustment With two different shim thicknesses included, this set provides additional flexibility when making fine spacing adjustments. Each shim measures 10x14mm, with five 0.1mm and five 0.2mm shims included. Features ✔ Genuine Team Losi Racing replacement/setup parts✔ 10x14mm shim dimensions✔ Includes two shim thicknesses✔ 0.1mm and 0.2mm options✔ Allows precise spacing and adjustment✔ Ideal for maintenance, rebuilds, and vehicle setup✔ Ten total shims included Includes (5) 10x14x0.1mm Shims (5) 10x14x0.2mm Shims Specifications Specification Details Brand Team Losi Racing Part Number TLR236006 Product Type Shim Set Shim Size 10x14mm Thicknesses 0.1mm & 0.2mm Quantity 10 Total Compatibility Compatible with: Losi 22 4.0 SPEC-Racer Losi 22X Losi 22X-4 1.0 Losi 22X-4 Elite Losi 22X-T Notes Includes five shims of each thickness, for a total of 10 shims. Verify compatibility with your specific vehicle and application before installation.    

Read more less

The XRAY 2.5mm Graphite Steering Block Extension is a front-end tuning option designed to adjust Ackermann geometry and steering response. This 1-slot version provides a handling characteristic between XRAY's standard 2-slot extension and the more aggressive 0-slot version. About the Graphite Steering Block Extension Fine-Tune Steering & Ackermann XRAY designed these extensions to work on either the left or right steering block. The 1-slot configuration turns the outside wheel more than the 2-slot version, producing additional steering while remaining less aggressive than the 0-slot option. Features: Genuine XRAY optional tuning component 2.5mm graphite steering block extensions 1-slot Ackermann configuration Allows fine adjustment of steering characteristics More aggressive steering than the 2-slot configuration Less aggressive than the 0-slot configuration Can be used on left and right steering blocks Designed for tuning across different surfaces and track conditions Lightweight graphite construction Includes two extensions Includes: (2) XRAY Graphite Steering Block Extensions – 1 Slot Specifications: Manufacturer: XRAYPart Number: 322291Material: GraphiteThickness: 2.5mmConfiguration: 1 SlotPosition: Front SteeringQuantity: 2 Compatibility: ✅ XRAY XB2✅ XRAY XT2 XRAY's current XB2 documentation continues to list 322291 as the optional 1-slot steering block extension, alongside 322290 2-slot, 322292 0-slot, and 322293 3-slot configurations. 💡 Pro Tip: XRAY's Ackermann options let you tune how aggressively the car steers: 322290 – 2 Slot: Easier to drive, less aggressive322291 – 1 Slot: Middle-ground steering response322292 – 0 Slot: Most aggressive steering, suited to tight and technical layouts

Read more less

The XRAY Aluminum Front Suspension Holder Brace is a precision-machined suspension tuning component designed for XB2 setups using the optional 23°/29° front lower arm mounts. Manufactured from premium Swiss 7075-T6 aluminum, the brace supports the front suspension holder while allowing either 23° or 29° kick-up configurations. Features: Genuine XRAY optional tuning component CNC-machined Swiss 7075-T6 aluminum Designed for 23° or 29° front kick-up Supports the optional front lower suspension arm mount Precision-machined for accurate suspension geometry Durable aluminum construction Designed for competition-level XB2 setups Required when using applicable 23°/29° optional arm mounts Includes: (1) XRAY Aluminum Front Suspension Holder Brace Specifications: Manufacturer: XRAYPart Number: 321211Material: Swiss 7075-T6 AluminumKick-Up: 23° / 29°Position: FrontType: Suspension Holder Brace Compatibility: ✅ XRAY XB2✅ XRAY XT2 configurations using this front suspension system XRAY manuals document 321211 alongside the optional 322313 aluminum and 322314 brass 23°/29° front lower arm mounts. 💡 Pro Tip: If you're buying 321211, double-check your front arm mount. This brace is specifically associated with the 23°/29° setup and is used with 322313 or 322314.

Read more less

The XRAY Aluminum Rear Hub Plate is a precision-machined rear suspension component designed for XRAY's multi-adjustable rear upright system. Manufactured from premium Swiss 7075-T6 aluminum, this plate provides a strong and precise mounting interface while allowing racers to take advantage of XRAY's adjustable rear hub geometry. About the Aluminum Rear Hub Plate Precision Rear Suspension Adjustment The 323381 rear hub plate works with XRAY's multi-adjustable rear upright system, allowing the rear hub configuration to be tuned through different mounting positions. XRAY factory manuals show the plate installed in the rear upright assembly and provide alternate mounting orientations for setup changes. Features: Genuine XRAY replacement and tuning component CNC-machined from Swiss 7075-T6 aluminum Designed for XRAY multi-adjustable rear uprights Precision-machined for accurate suspension fitment Multiple mounting positions for rear suspension tuning Lightweight and durable aluminum construction Suitable for left or right rear upright Competition-oriented suspension component Great replacement or race-day tuning spare Includes: (1) XRAY Aluminum Rear Hub Plate Specifications: Manufacturer: XRAYPart Number: 323381Material: Swiss 7075-T6 AluminumPosition: RearQuantity: 1 Compatibility: ✅ XRAY XB2✅ XRAY XB4 XRAY factory documentation shows 323381 in both XB2 and XB4 rear upright assemblies. 💡 Pro Tip: This is one rear hub plate, not a pair. The same 323381 plate is used on either the left or right rear upright, so you'll need two if you're replacing both sides. XRAY's assembly diagrams specifically show the rear upright assembly as L=R

Read more less

The XRAY 83mm Front Drive Shaft is a genuine replacement CVD driveshaft designed for the XB4 front drivetrain. Manufactured from XRAY's premium HUDY Spring Steel™, this shaft combines high strength, durability, and precise machining for smooth and efficient power delivery. About the Front Drive Shaft Competition-Ready CVD Performance This 83mm CVD driveshaft uses a 2.5mm drive pin and is designed for the front drivetrain. XRAY factory documentation identifies the 83mm CVD as the included front driveshaft on multiple XB4 generations. Features: Genuine XRAY replacement component Front CVD driveshaft Premium HUDY Spring Steel™ construction 83mm length 2.5mm drive pin Precision-machined for smooth drivetrain operation Designed for competition-level durability Suitable for left or right front position Excellent replacement or race-day spare Includes: (1) XRAY Front Drive Shaft Specifications: Manufacturer: XRAYPart Number: 365225Material: HUDY Spring Steel™Length: 83mmDrive Pin: 2.5mmType: CVDPosition: FrontQuantity: 1 Compatibility: ✅ XRAY XB4 XRAY's factory documentation confirms 365225 across multiple XB4 generations, including the XB4 2021 and XB4 2024 front drivetrain assemblies. 💡 Pro Tip: XRAY also lists other front shaft options around this setup, including 365202 – 83mm ECS and 365226 – 84mm CVD. Make sure you're matching the shaft length and CVD/ECS configuration required by your specific setup.

Read more less

The XRAY 77mm Rear Drive Shaft is a precision CNC-machined CVD driveshaft manufactured from XRAY's renowned HUDY Spring Steel™. Designed for competition-level durability and drivetrain efficiency, this rear driveshaft features a 2.5mm drive pin and a thin, lightweight profile while maintaining excellent strength. XRAY directly confirms these specifications for part 325327. About the Rear Drive Shaft Precision Drivetrain Performance The 77mm driveshaft is designed to provide efficient power transfer through the rear drivetrain. XRAY uses a proprietary hardening process on its HUDY Spring Steel™ driveshafts to increase durability and service life while maintaining a thin shaft profile for reduced rotating mass. Features: Genuine XRAY replacement drivetrain component CNC-machined CVD rear driveshaft Premium HUDY Spring Steel™ construction 77mm length 2.5mm drive pin Thin, lightweight driveshaft design Designed for maximum drivetrain efficiency Proprietary hardened construction for increased durability Precision manufactured for competition RC racing Includes: (1) XRAY Rear Drive Shaft Specifications: Manufacturer: XRAYPart Number: 325327Material: HUDY Spring Steel™Length: 77mmDrive Pin: 2.5mmPosition: RearQuantity: 1 Compatibility: ✅ XRAY XB2 XRAY's XB2 manuals continue to list 325327 in the rear drivetrain, including newer XB2 configurations. There is also evidence of this 77mm shaft being used on certain XB4 configurations, but I would not advertise universal XB4 compatibility because fitment varies by generation and setup. 💡 Pro Tip: When replacing the rear driveshaft, inspect the drive shaft coupling, 2.5mm pin, drive axle, and bearings for wear at the same time. Excessive play in any of these components can reduce drivetrain efficiency and accelerate wear on the new shaft.

Read more less

The XRAY XB4 Aluminum 12° C-Hub is a premium suspension tuning option designed for high-traction racing conditions. CNC-machined from Swiss 7075-T6 aluminum, these C-hubs provide increased strength and precise front suspension geometry while offering a different handling characteristic from the composite C-hub options. Available in Right or Left — select the side you need. XRAY confirms 362234 is Right and 362244 is Left. Features: Available in Right or Left Pre-set 12° caster angle CNC-machined Swiss 7075-T6 aluminum Black-coated and laser engraved Recommended for high-traction conditions Increases steering coming out of corners Improves stability entering corners Adjustable roll-center position using shims Large opening allows easier CVD installation and removal Genuine XRAY performance option Available Options: Right – 362234(1) XRAY Aluminum C-Hub Right – 12° Left – 362244(1) XRAY Aluminum C-Hub Left – 12° Specifications: Manufacturer: XRAYPart Numbers: 362234 / 362244Material: Swiss 7075-T6 AluminumCaster: 12°Position: Front – Left or RightQuantity: 1 C-Hub per selected option Compatibility: ✅ XRAY XB4 XRAY's current XB4 documentation continues to list both 362234 Right and 362244 Left as 12° aluminum C-hub options. 💡 Pro Tip: XRAY specifically recommends the 12° aluminum C-hubs for high-traction conditions, noting increased steering on corner exit and greater stability entering the corner. Right = 362234Left = 362244 Confidence: HIGH — verified directly against XRAY.

Read more less

The XRAY Aluminum Lower Suspension Holder is a precision-machined front suspension component designed for XRAY's Horizontal Split (HS) bulkhead system. Part 362313 installs in the Front-Front (FF) position and works with XRAY's eccentric bushing system to provide a wide range of suspension geometry adjustments. About the Aluminum Lower Suspension Holder Precision Suspension Geometry & Setup Tuning The 362313 holder allows racers to fine-tune front kick-up, roll center, and front track width by changing the position of the eccentric suspension bushings. XRAY also designed the holder so its orientation can be changed depending on track conditions, with the downward orientation primarily used for dirt and the upward orientation primarily used for carpet. Features: Genuine XRAY suspension component Front-Front (FF) lower suspension holder Designed for Horizontal Split (HS) bulkheads CNC-machined aluminum construction Works with XRAY eccentric suspension bushings Allows adjustment of front kick-up Allows roll-center adjustment Allows front track-width adjustment Can be oriented for dirt or carpet setups Supports standard and long front suspension arm configurations Black-coated finish Designed for competition-level suspension tuning Includes: (1) XRAY Aluminum Lower Suspension Holder – Front-Front Specifications: Part Number: 362313Material: Swiss 7075-T6 AluminumFinish: Black CoatedPosition: Front-Front (FF)Bulkhead Type: Horizontal Split (HS)Type: Lower Suspension Holder Compatibility: ✅ XRAY XB4✅ XRAY XT4 XRAY factory documentation confirms 362313 in both XB4 and XT4 front suspension assemblies. 💡 Pro Tip: 362313 is the Front-Front (FF) holder. The matching Front-Rear (FR) holder is 362323. These two parts work together around the front HS bulkhead, so make sure you're ordering the correct position.

Read more less

The XRAY Aluminum Lower Suspension Holder is a precision-machined suspension tuning component designed for XRAY's Horizontal Split (HS) bulkhead system. Part 362323 installs in the front-rear (FR) position of the front suspension assembly. XRAY's factory manuals confirm the part number and FR location. About the Aluminum Lower Suspension Holder Precision Front Suspension Tuning Designed around XRAY's eccentric bushing system, this aluminum suspension holder allows racers to fine-tune important front-end geometry. XRAY specifically notes that different eccentric bushing combinations allow adjustment of front kick-up, roll center, and front track width, making this more than just a replacement part—it's also a valuable setup component. Features: Genuine XRAY suspension component Front-Rear (FR) lower suspension holder Designed for Horizontal Split (HS) bulkheads Aluminum construction Works with XRAY eccentric suspension bushings Allows adjustment of front kick-up Allows roll-center tuning Allows front track-width adjustment Precision fit for compatible XRAY 4WD platforms Excellent replacement or race-day setup option Includes: (1) XRAY Aluminum Lower Suspension Holder – Front-Rear Specifications: Part Number: 362323Material: AluminumPosition: Front Suspension – Rear Holder (FR)Bulkhead Type: Horizontal Split (HS)Type: Lower Suspension Holder Compatibility: ✅ XRAY XB4✅ XRAY XT4 The part is documented in the XB4 platform and is also specifically listed in the XT4 2024 front suspension assembly. 💡 Pro Tip: 362323 is the FR holder. If you're looking at the front suspension assembly, don't confuse it with 362313, which XRAY identifies as the matching Front-Front (FF) aluminum lower suspension holder.

Read more less

🏁 Large-Volume Design. Tough Composite. Genuine XRAY Performance. The XRAY Large Volume Composite Gear Differential Case is a genuine replacement differential housing designed for XRAY's large-volume gear differential system. XRAY manufactures the case from tough composite material and uses a rubber-sealed design to help maintain consistent differential operation. Designed for use in the front or rear differential, this is the standard composite version of the case, with 364912-G available separately as the optional graphite-composite version. ⚡ Features: 🏁 Genuine XRAY replacement part⚙️ Large-volume gear differential case💪 Tough composite construction🛡️ Rubber-sealed differential design🔧 Suitable for front or rear differential use🎯 Precision factory fitment🏎️ Designed for XRAY's large-volume differential system🛠️ Direct replacement for a worn or damaged differential case 📦 Includes: (1) XRAY Large Volume Composite Gear Differential Case 📏 Specifications: Part Number: 364912Material: CompositeType: Gear Differential CaseDifferential Type: Large VolumePosition: Front or Rear 🔧 Compatibility: Verified XRAY documentation shows 364912 used on multiple generations of the: ✅ XRAY XB4 XRAY's factory documentation confirms its use in the XB4 front and rear differential assemblies, including the XB4 2021, 2022, 2024, and 2025 platforms. 💡 Pro Tip: Don't confuse 364912 with 364912-G. The standard 364912 is the tough composite version, while 364912-G is XRAY's optional graphite-composite version.  

Read more less

🏁 Genuine XRAY Replacement. Precision Steering Hardware. The XRAY +5mm Servo Saver Pivot Shafts are genuine replacement steering components designed to support the servo saver and steering assembly on compatible XRAY 1/10 4WD off-road platforms. XRAY's official parts listing identifies 362552 specifically as “Servo Saver Pivot Shaft +5mm (2).” ⚡ Features: 🏁 Genuine XRAY replacement parts📏 +5mm pivot shaft configuration⚙️ Designed for the servo saver and steering assembly🎯 Maintains proper steering-system positioning and geometry🔧 Direct replacement for the factory pivot shafts🏎️ Designed for competition-level XRAY off-road platforms🛠️ Great replacement or race-day spare 📦 Includes: (2) XRAY Servo Saver Pivot Shafts +5mm 📏 Specifications: Part Number: 362552Type: Servo Saver Pivot ShaftConfiguration: +5mmQuantity: 2Position: Steering / Servo Saver Assembly 🔧 Compatibility: Verified XRAY documentation shows 362552 used across multiple generations of: ✅ XRAY XB4✅ XRAY XT4 For example, XRAY's XB4 2024, XB4 2025, XB4 2026, and XT4 2025 manuals all identify 362552 in the steering assembly. 💡 Pro Tip: These pivot shafts work directly with the servo saver assembly, so if you're rebuilding a steering system, inspect the servo saver, bearings, steering bushings, and steering plate for play at the same time.

Read more less

 🏁 Graphite Composite. Precision Steering. Genuine XRAY Performance. The XRAY Graphite Composite Steering Block is designed for use with XRAY's carbon steering block extension plate system. The graphite composite construction provides a stiff, lightweight steering component designed for precise front-end response and competition-level durability. XRAY's official parts listing identifies 362251-G specifically as “Composite Steering Block for Carbon Extension Plate – Graphite.” ⚡ Features: 🏁 Genuine XRAY replacement/tuning part💪 Graphite composite construction🎯 Designed for precise steering response🪶 Lightweight composite design🔧 Designed specifically for use with XRAY carbon extension plates⚙️ Compatible with XRAY's front CVD drivetrain configuration🏎️ Competition-oriented steering component🛠️ Great replacement or race-day spare 📦 Includes: (1) XRAY Graphite Composite Steering Block 📏 Specifications: Part Number: 362251-GMaterial: Graphite CompositeType: Steering BlockPosition: FrontQuantity: 1Application: Carbon Extension Plate Steering System 🔧 Compatibility: ✅ XRAY XB4 platforms using the applicable carbon extension plate steering system The XB4 2026 factory manual specifically lists 362251-G as the included graphite steering block, alongside 362251-M Medium and 362261 Aluminum as setup options. 💡 Pro Tip: Don't confuse 362251-G with 362250-G. XRAY lists them as two different parts: 362251-G is specifically designed for the carbon extension plate, while 362250-G is the standard graphite composite steering block.

Read more less

 🏁 Lightweight. Precise. Genuine XRAY Replacement. The XRAY Composite Servo Saver is a genuine factory replacement component designed for XRAY's steering system. The molded composite pieces form the servo saver assembly, helping protect the steering servo from impacts while maintaining smooth and responsive steering operation. XRAY's official parts listings identify 362510 specifically as the Composite Servo Saver. ⚡ Features: 🏁 Genuine XRAY replacement part⚙️ Molded composite construction🛡️ Servo saver design helps protect steering components from impacts🎯 Maintains smooth steering operation🪶 Lightweight factory-style construction🔧 Direct replacement for the original servo saver components🛠️ Great replacement or race-day spare 📦 Includes: (1) XRAY Composite Servo Saver Set 📏 Specifications: Part Number: 362510Material: CompositeType: Servo SaverPosition: Steering Assembly 🔧 Compatibility: XRAY's documentation confirms 362510 is used on multiple XRAY 1/10 off-road platforms, including the XB4 and XT4 families. It remains listed in the XT4 parts documentation as the standard composite servo saver. 💡 Pro Tip: XRAY also offers 362510-G, the optional graphite composite version. The graphite version uses a specially formulated material intended to increase strength, improve friction characteristics, and reduce weight.

Read more less

🏁 High-Grip Stability. Linear Response. Factory-Matched Performance. The XRAY 42mm 5-Dot Front Spring Set is designed specifically for XRAY big-bore shocks, providing a constant linear spring rate throughout compression for predictable and consistent suspension performance. XRAY identifies the 5-dot rating directly on the springs for quick setup identification. Each XRAY spring is individually measured, selected, and matched into pairs to ensure equal length and consistent performance between the left and right sides of your race car. ⚡ Features: 🏁 Genuine XRAY optional tuning springs⚙️ 5-Dot front spring rate📏 42mm length🎯 Linear spring design provides a constant rate throughout compression🔧 Specifically designed for XRAY big-bore shocks⚖️ Individually measured and matched into pairs🚀 Provides additional suspension setup options🔥 XRAY notes the 5-dot spring can improve front stability and overall handling on very high-grip tracks 📦 Includes: (2) XRAY 42mm 5-Dot Front Springs 📏 Specifications: Part Number: 368195Position: FrontLength: 42mmSpring Type: LinearIdentification: 5 DotsQuantity: 2 🔧 Compatibility: Used across multiple XRAY 1/10 off-road platforms, including various: ✅ XRAY XB2✅ XRAY XB4✅ XRAY XT2 Fitment spans numerous generations, so racers should confirm the 42mm front spring configuration used on their specific model before ordering. 💡 Pro Tip: The 5-Dot is a setup spring, not simply a replacement spring. XRAY specifically notes that this spring can provide better front stability and overall handling in very high-grip conditions, making it a useful tuning option for carpet and other high-traction surfaces.

Read more less

 🏁 Lightweight. Precise. Factory XRAY Steering Performance The XRAY Composite Steering Arms are genuine replacement steering components designed for XRAY's 1-piece chassis steering system. XRAY's factory manuals identify 322515 as the HARD composite steering arms included with the vehicle, with aluminum 322516 arms available as the optional upgrade. Designed for smooth, precise steering operation, these composite arms provide the factory steering characteristics intended by XRAY while keeping the steering assembly lightweight. ⚡ Features: 🏁 Genuine XRAY replacement parts💪 Hard composite construction🪶 Lightweight steering system design🎯 Designed for precise and consistent steering operation⚙️ Specifically designed for XRAY's 1-piece chassis configuration🔧 Direct replacement for the factory steering arms🏎️ Competition-ready factory specification🛠️ Great replacement or race-day spare 📦 Includes: (2) XRAY Composite Steering Arms 📏 Specifications: Part Number: 322515Material: Hard CompositeQuantity: 2Position: Front SteeringApplication: 1-Piece Chassis Steering System 🔧 Compatibility: Verified XRAY documentation shows 322515 used on: ✅ XRAY XB2 2024 Carpet✅ XRAY XB2 2024 Dirt ✅ XRAY XB2 2025 Dirt ✅ XRAY XT2 2024 Important: This part is specifically associated with the newer 1-piece chassis steering configuration, so I would not advertise it as fitting older XB2 generations universally. One parts source specifically lists it as incompatible with XB2 2022 and 2023 models. 💡 Pro Tip: If you're looking for a stronger, more rigid steering setup, XRAY offers 322516 Aluminum Steering Arms as the optional upgrade. XRAY states that the aluminum arms increase strength and reliability while improving steering precision and feel.

Read more less

 🏁 Lower Shocks. More Rear Traction. Serious Setup Tuning. The XRAY Aluminum Rear Shock Absorber Adapter Set is a performance tuning upgrade designed to mount the rear shocks lower on the suspension arms. Lowering the shock mounting position helps lower the center of gravity and generate additional rear traction, particularly on high-grip carpet and Astro tracks. Two mounting configurations allow the shocks to be positioned toward the inside or outside, giving racers another way to fine-tune rear suspension behavior. ⚡ Features: 🏁 Genuine XRAY performance option⬇️ Allows rear shocks to mount lower on the suspension arms🎯 Helps generate increased rear traction⚖️ Lowers the vehicle's center of gravity🔧 Inside or outside shock mounting options➡️ Arrow markings make mounting positions easy to identify💪 CNC-machined from premium Swiss 7075-T6 aluminum🪶 Lightweight and extremely durable construction⚫ Black anodized finish🏎️ Especially recommended for carpet and Astro surfaces🔩 Includes +2mm and +4mm longer shock ball joints 📦 Includes: (1) XRAY Rear Shock Absorber Adapter Set (1+1) +2mm Longer Shock Ball Joint +4mm Longer Shock Ball Joint 📏 Specifications: Part Number: 362390Material: Swiss 7075-T6 AluminumFinish: Black AnodizedPosition: RearApplication: Lower Shock Mounting / Suspension Tuning 🔧 Compatibility: XRAY documentation confirms 362390 across multiple current and recent platforms, including: ✅ XRAY XB2✅ XRAY XB4✅ XRAY XT4 XRAY's XB2 documentation specifically lists the 362390 adapter, and current XB4 documentation also shows it in the rear shock assembly. 💡 Pro Tip: This isn't just a replacement part—it's a setup option. Moving the rear shock mounting point lower can increase rear traction and lower CG, which is why XRAY particularly recommends these adapters for carpet and Astro racing. The two mounting alternatives give you additional flexibility when dialing in the rear of the car.

Read more less

 🏁 Precision Machined. Ultra-Durable. Genuine XRAY Performance. The XRAY Front Drive Axle is a genuine replacement drivetrain component designed for the XB4 and compatible XT4 platforms. XRAY manufactures this axle from its renowned HUDY Spring Steel™, providing the strength, durability, and precision required for competitive 1/10 scale racing. Designed for use on either the front left or front right, this axle is a direct replacement for the factory component. ⚡ Features: 🏁 Genuine XRAY replacement part💪 Manufactured from HUDY Spring Steel™⚙️ Precision-machined front wheel drive axle🎯 Designed for accurate drivetrain fit and operation🔧 Fits either front left or front right position🚀 Built for competition-level durability🛠️ Excellent replacement or race-day spare 📦 Includes: (1) XRAY Front Drive Axle 📏 Specifications: Part Number: 365240Material: HUDY Spring Steel™Position: Front Left or RightType: Front Drive Axle 🔧 Compatibility: Verified fitment includes: ✅ XRAY XB4 Original✅ XRAY XB4 2016✅ XRAY XB4 2017✅ XRAY XB4 2018✅ XRAY XB4 2019✅ XRAY XB4 2020✅ XRAY XB4 2021 Carpet✅ XRAY XB4 2021 Dirt✅ XRAY XT4 XRAY's newer documentation also continues to show 365240 in the XB4 front drivetrain, including the XB4 2024 manual and newer XB4 parts listings. 💡 Pro Tip: Front drive axles take significant load from acceleration, steering, and impacts. If you're replacing a damaged axle, check the drive shaft coupling, cross pin, wheel bearings, and wheel hub at the same time for wear or play.

Read more less

🏁 Lightweight Graphite Composite. LCG Differential Performance. Upgrade or replace the gear differential pulley/case on your XRAY with the 324954-G Graphite Composite Gear Differential Case with 53T Pulley. XRAY identifies this as the graphite optional version of the standard 324954 LCG differential component. Designed for XRAY's LCG gear differential, the graphite composite construction provides an optional alternative to the standard hard-composite version while retaining the factory 53-tooth configuration. ⚡ Features: 🏁 Genuine XRAY option part⚙️ Integrated 53-tooth gear differential pulley🪶 Graphite composite construction🔧 Designed for XRAY's LCG gear differential system🎯 Precision factory fitment🚀 Optional graphite version of standard part #324954🛠️ Excellent replacement or tuning component for your race-day parts box 📦 Includes: (1) XRAY LCG Graphite Composite Gear Differential Case with 53T Pulley 📏 Specifications: Part Number: 324954-GMaterial: Graphite CompositeTooth Count: 53TType: LCG Gear Differential Case / PulleyPosition: Rear Drivetrain 🔧 Verified Compatibility: ✅ XRAY XB2 2020 Carpet✅ XRAY XB2 2020 Dirt✅ XRAY XT2 2021 Carpet XRAY's own documentation also shows 324954-G as the optional graphite gear-differential pulley in later XB2 and XT2 LCG differential assemblies. 💡 Pro Tip: The important distinction here is the “-G” suffix. 324954 is the standard hard-composite 53T LCG component, while 324954-G is the optional graphite-composite version.

Read more less

 🏁 Lightweight. Precise. Genuine XRAY Replacement. Keep your XRAY steering system smooth and precise with the XRAY Composite Steering Plate. Designed specifically for XRAY's 1-piece chassis platforms, this factory steering plate provides the proper geometry and fit needed for consistent steering performance. XRAY lists 322574 as the hard composite steering plate included with the vehicle, with the aluminum 322575 available as the optional upgrade. ⚡ Features: 🏁 Genuine XRAY replacement component⚙️ Hard composite construction🪶 Lightweight design for minimal steering-system weight🎯 Maintains precise steering geometry🔧 Designed specifically for XRAY 1-piece chassis configurations🚀 Smooth, consistent steering operation🛠️ Direct replacement for the factory steering plate🏎️ Ideal for maintenance, rebuilds, or your race-day spare parts box 📦 Includes: (1) XRAY Composite Steering Plate 📏 Specifications: Part Number: 322574Material: Hard CompositeType: Steering PlateApplication: 1-Piece Chassis Steering System 🔧 Compatibility: Compatible with XRAY XB2 and XT2 models equipped with the applicable 1-piece chassis, including XB2 and XT2 platforms where 322574 is specified in the factory assembly. 💡 Pro Tip: If you're looking for additional steering-system strength and a more precise steering feel, XRAY offers the 322575 aluminum steering plate as the optional upgrade. XRAY notes that the aluminum version also provides increased clearance around the steering system for easier maintenance and setup adjustments.

Read more less

🏁 Genuine XRAY Replacement. Lightweight Composite. Precision Drivetrain Fit. Keep your XRAY drivetrain running smoothly with the XRAY XB2 LCG 38-Tooth Composite Gear. Designed for the LCG gear differential system, this genuine XRAY replacement component provides the precise fit and drivetrain performance expected from XRAY competition platforms. The lightweight composite construction helps keep rotating mass low while providing the durability needed for competitive 1/10 scale racing. ⚡ Features: 🏁 Genuine XRAY replacement part⚙️ 38-tooth composite gear🪶 Lightweight composite construction🎯 Precision molded for accurate fit and smooth operation🔧 Designed for the XRAY LCG gear differential system🚀 Helps maintain efficient and consistent drivetrain performance🛠️ Ideal replacement for worn or damaged differential components🏎️ Designed for competition-level 1/10 scale racing 📦 Includes: (1) XRAY LCG Composite Gear (38T) 📏 Specifications: Part Number: 324238Tooth Count: 38TMaterial: CompositeType: LCG Gear Differential Component 🔧 Compatibility: ✅ XRAY XB2 2020 Carpet✅ XRAY XB2 2020 Dirt✅ XRAY XT2 2021 Carpet 💡 Pro Tip: Differential and drivetrain gears experience constant load during acceleration and braking. If you're replacing a worn 38T gear, inspect the mating gears and differential components at the same time for damaged or rounded teeth. Keeping the complete gear set in good condition helps maintain a smooth, efficient drivetrain and consistent power delivery.

Read more less