Team Associated 7.8x3.5x2.0mm Aluminum Hub Spacer Washers – Blue (10) – Part 31389Maximum Spacing. Race-Ready Adjustability. The Team Associated 7.8x3.5x2.0mm Blue Aluminum Hub Spacer Washers (31389) are ideal for making larger wheelbase and hub spacing adjustments on RC8B3 and RC8T3 series vehicles—or any platform that uses 3.5mm hinge pins. Durable and lightweight, these aluminum washers are a reliable tuning option for racers who want full control over rear-end geometry. ✅ Size: 7.8mm OD x 3.5mm ID x 2.0mm thick✅ Anodized blue 7075 aluminum – high strength, low weight✅ Designed for wheelbase and hub spacing adjustments✅ Compatible with 3.5mm hinge pin platforms✅ Pairs perfectly with 0.5mm and 1.0mm spacers (sold separately) 📦 Includes: (10) 7.8x3.5x2.0mm Blue Aluminum Hub Spacer Washers Part #: 31389 💡 Pro Tip: Use thicker spacers like this to extend wheelbase for more high-speed stability or track-specific tuning.

Read more less

Team Associated 7.8x3.5x0.5mm Aluminum Hub Spacer Washers – Blue (10) – Part 31387Fine-Tune Wheelbase. Maximize Setup Precision. The Team Associated 7.8x3.5x0.5mm Blue Aluminum Hub Spacer Washers (31387) are perfect for adjusting wheelbase and tuning suspension geometry on vehicles with 3.5mm hinge pins. Commonly used on the RC8B3 and RC8T3 series, these lightweight spacers are also compatible with other platforms that accept 3.5mm hinge pins. ✅ Pack of 10 high-precision spacers✅ Size: 7.8mm OD x 3.5mm ID x 0.5mm thick✅ Blue anodized aluminum – lightweight and corrosion-resistant✅ Used for fine-tuning wheelbase and hub spacing✅ Compatible with RC8B3, RC8T3, and any vehicle using 3.5mm hinge pins✅ Also available in 1.0mm and 2.0mm thicknesses (sold separately) 📦 Includes: (10) 7.8x3.5x0.5mm Blue Aluminum Hub Spacer Washers Part #: 31387 💡 Pro Tip: Stack different thicknesses to get the exact rear end length or toe-in setup you're after.

Read more less

Team Associated FT Carbon Fiber Front Suspension Arms – ASC92297 Precision Performance for RC10B74.1 & B74.1D Upgrade your B74.1's front end with these Factory Team Carbon Fiber Front Suspension Arms, engineered for lightweight strength and high-traction performance. These arms deliver sharper, more stable handling, especially in fast corners and on high-grip tracks. ⚙️ Features: ✅ Carbon Fiber Construction – Extreme rigidity for responsive steering and stability ✅ 12% Lighter than “hard” material arms ✅ Boosted Durability – Significantly stronger than standard “hard” arms ✅ Factory Team quality for competition-level performance 📦 Includes: (1) Left Front Carbon Suspension Arm (1) Right Front Carbon Suspension Arm ✅ Compatibility: Team Associated RC10B74.1 Team Associated RC10B74.1D 🔧 Perfect for racers seeking precision handling and reduced unsprung weight.

Read more less

Team Associated RC10B74.2 FT Lightweight Driveline Center Kit – ASC92372 Maximize Efficiency. Minimize Rotational Mass. Take your RC10B74 to the next level with the Factory Team Lightweight Center Driveline Kit. Designed specifically for 13.5T Spec class racing, this kit reduces rotational mass by an impressive 19.3g compared to the standard steel setup—resulting in quicker acceleration and improved handling. ⚙️ Features: ✅ Reduces center driveline mass by 19.3g ✅ Includes lightweight dogbones and aluminum outdrives ✅ Plastic blade inserts reduce metal-to-metal wear ✅ Designed for use with center differential (not slipper) ✅ Ideal for 13.5T Spec racing class 📦 Includes: Lightweight center dogbones Aluminum outdrives Plastic blade inserts Complete hardware for installation ✅ Compatibility: RC10B74 RC10B74.1 RC10B74.1D RC10B74.2 RC10B74.2D ⚠️ Note: Not recommended for modified racing or use with slipper clutch systems. 🏁 Built for racers chasing every gram of performance advantage.

Read more less

Team Associated RC10B74.2 Differential Pinion Gear Shims (5x6.5x1mm) – ASC92319 Precision Spacing for Consistent Gear Mesh. These Factory Team 5x6.5x1mm differential pinion gear shims are designed specifically for the RC10B74.2 and B74.2D. Ideal for maintaining correct gear mesh and minimizing drivetrain wear, these shims ensure smooth differential operation and long-term performance. 🔧 Features: ✅ OEM-quality replacement shims ✅ Sized 5x6.5x1mm for perfect pinion gear fit ✅ Helps fine-tune gear mesh and reduce wear ✅ Compatible with RC10B74.2 & B74.2D 📦 Includes: (Set of) Differential Pinion Gear Shims (5x6.5x1mm) 🛠️ Keep your drivetrain dialed in with these must-have tuning components!

Read more less

Team Associated Aluminum LRC "D" Arm Mount – RC10B74.1 Optimize rear suspension geometry with precision. The ASC92261 Aluminum LRC "D" Arm Mount is a factory replacement part designed for the RC10B74.1 and B74.1D 1/10 scale 4WD electric buggies. Built from durable aluminum, this mount delivers enhanced strength and consistent performance under race conditions. ⚙️ Features: 🧱 CNC-machined aluminum for increased durability 📐 LRC (Low Roll Center) geometry helps fine-tune rear suspension behavior 🔧 Direct fit replacement for kit-supplied “D” arm mount 📦 Includes: (1) Aluminum LRC "D" Arm Mount ✅ Compatibility: Team Associated RC10B74.1 Team Associated RC10B74.1D Maintain your edge on the track with genuine Team Associated tuning components.

Read more less

🔌⚡ Clean Wiring. Reliable Signal. Low-Profile Design. The ProTek RC Flat Sensor Wire is designed to provide consistent, interference-free communication between your sensored brushless motor and ESC. With a slim, flat design, it keeps your build clean while improving wire routing in tight chassis layouts. 🏁 About This Sensor Wire 📏 Clean, Low-Profile Routing The flat cable design allows easy routing under components and through tight spaces, reducing clutter and improving overall build appearance. ⚡ Reliable Signal Transfer Engineered for consistent, interference-resistant communication, ensuring smooth motor performance in sensored brushless setups. 🎯 Perfect Fit Length At 150mm, this cable is ideal for a wide range of 1/10 scale applications and clean electronics layouts. 🔧 Key Features ✔ Low-profile flat cable design✔ Reliable signal transfer for sensored systems✔ Slim construction for easy routing✔ Helps reduce wiring clutter✔ Interference-resistant performance✔ Optimized for brushless motor/ESC communication 📦 Includes (1) Flat Sensor Wire (150mm) 📊 Specifications Length: 150mm 🧰 Recommended Use Sensored brushless motor to ESC connection Clean electronics installations Organized wiring setups  

Read more less

🧵🔧 Clean Mounting. Strong Hold. Easy Access. The ProTek RC Body Mounting Hook & Loop Tape provides a simple, reliable solution for securing RC bodies and accessories. With a full 1-meter length, you can cut exactly what you need for a clean, custom setup. 🏁 About This Tape ✂️ Fully Customizable Supplied in a 1-meter length, this tape can be cut to fit any application—from body mounting to accessory placement. 🔒 Secure & Reliable Hold The hook and loop design keeps bodies and components firmly in place, even under demanding conditions. 🔄 Quick Removal Easily remove your body for maintenance or battery changes without dealing with clips or hardware. 🔧 Key Features ✔ 1-meter length for custom applications✔ Strong hook & loop fastening system✔ Secure hold for RC bodies and accessories✔ Allows quick and easy removal✔ Ideal for clean, clipless setups✔ Versatile for multiple RC uses 📦 Includes (1) Hook & Loop Tape (1 Meter Length) 🧰 Recommended Use Body mounting (clipless setups) Securing electronics or accessories Custom RC builds and modifications    

Read more less

🏁 Clean Look. Lightweight Upgrade. Precision Fit. Upgrade your sway bar setup with this R1WURKS aluminum hardware set, designed to replace the stock components with a lightweight, blacked-out look and precise fit. 🏁 About the Sway Bar Hardware Set ⚙️ Lightweight & Durable Machined from high-strength 7075-T6 aluminum, these components offer a solid balance of durability and reduced weight. 🎯 Precision Fit CNC machining ensures accurate fitment and smooth operation, helping maintain consistent sway bar performance. 🖤 Clean, Blacked-Out Style Finished in matte black anodizing with subtle R1 laser-etched branding for a sleek, professional appearance. 🔧 Key Features ✔ 7075-T6 aluminum construction✔ Precision CNC-machined components✔ Matte black anodized finish✔ Laser-etched R1 branding✔ Lightweight sway bar balls✔ Direct replacement upgrade 📦 Includes (2) Sway Bar Bearing Collars (2) Sway Bar Balls (4) M3x3 Set Screws 🚗 Compatibility Team Associated RC10 SC7 Team Associated RC10 T7 Team Associated RC10 B84 Team Associated RC10 B84D Team Associated RC10 B7 Team Associated RC10 B7D 🏁 Simple upgrade. Clean look. Dialed performance.  

Read more less

Seal & Hardware Overview:This is a replacement differential seal and hardware set designed for the Team Losi Racing 22X-4 platform. It helps maintain proper differential sealing and ensures reliable operation. 🔧 Key Features ✔ Replacement diff seal and hardware set✔ Helps maintain proper sealing✔ Supports smooth differential performance✔ Direct fit design 📦 Includes Differential seals Associated hardware 🚗 Compatibility Team Losi Racing 22X-4 Ideal for maintenance or rebuilds, this set helps keep your differential sealed properly and performing consistently.  

Read more less

Ring Gear Overview:This is a replacement differential ring gear designed for the Team Losi Racing 22X-4 platform. It ensures proper drivetrain function and smooth power transfer through the differential. 🔧 Key Features ✔ Replacement differential ring gear✔ Maintains smooth drivetrain operation✔ Direct fit design 📦 Includes (1) Differential Ring Gear 🚗 Compatibility Team Losi Racing 22X-4 Ideal for replacing worn or damaged components, this ring gear helps keep your drivetrain running consistently and reliably.    

Read more less

Built for competitive stock racing, the ProTek RC 2S 150C “Stock Spec” Shorty LiPo delivers consistent power, low internal resistance, and excellent efficiency from start to finish. Featuring advanced Si-Graphene cell technology, this pack provides strong punch, cooler operating temps, and reliable voltage throughout the entire run. The shorty-style design is perfect for modern 2WD and 4WD setups, offering improved weight distribution and flexibility in chassis tuning. With increased capacity and extended cycle life, this battery is a top choice for racers who demand consistent performance every lap. 🔧 Features:• 150C discharge rating for strong power and punch• Advanced Si-Graphene technology for low IR and efficiency• 5600mAh capacity for extended runtime• Shorty pack design for improved weight balance and setup options• Runs cooler with lower internal resistance• Designed for stock class racing performance• ROAR Approved for competition use 📦 Includes:• (1) ProTek RC 2S Shorty LiPo Battery• (2) 5mm Bullet Connectors ⚙️ Specifications:• Voltage: 7.4V (2S)• Capacity: 5600mAh• Discharge Rate: 150C• Max Charge Rate: 10C (56A)• Watt Hours: 41.44Wh• Connector: 5mm Bullet• Balance Plug: 2mm Bullet• Dimensions: 95.7 x 47.1 x 25.1mm• Weight: 224g (7.90oz) ⚠️ Battery Safety Notes:• Always use a LiPo-compatible charger• Balance charge only and never leave charging unattended• Do not overcharge or over-discharge (min 3.2V per cell)• Allow battery to cool before recharging• Use a LiPo safe charging bag or box For racers who need reliable power and consistent performance, the ProTek RC 150C Stock Spec Shorty LiPo delivers the voltage, efficiency, and durability to stay competitive from the first lap to the last.  

Read more less

Get clean, reliable solder joints every time with the ProTek RC Premium Rosin Core Solder 60/40. Designed for RC electronics and precision work, this solder features a classic 60/40 tin-to-lead blend that delivers smooth flow, excellent conductivity, and easy handling for everything from simple repairs to full custom builds. The integrated rosin core flux promotes strong bonding and clean joints by improving wetting action and reducing oxidation. Whether you're soldering connectors, wiring, or electronics, this solder provides consistent, professional-quality results. 🔧 Features:• 60/40 tin-to-lead blend for reliable performance• Rosin core flux for clean, strong solder joints• Smooth flow for easy and precise application• Excellent electrical conductivity• Helps reduce oxidation and improve bonding• Ideal for RC wiring, connectors, and electronics 📦 Includes:• (1) ProTek RC Premium Rosin Core Solder 60/40 (12g) ⚙️ Specifications:• Weight: 12g• Type: Rosin Core Solder• Composition: 60/40 Tin/Lead Perfect for builders and racers alike, the ProTek RC 60/40 solder delivers dependable performance and clean results for all your RC electronics work.  

Read more less

Keep your bearings spinning smoother and lasting longer with R1WURKS DOPE Double Ceramic Long Life Bearing Lube. Specially developed for high-performance RC applications, this advanced lubricant helps reduce friction, improve efficiency, and extend the life of your bearings under demanding racing conditions. Formulated with double ceramic technology, this premium bearing oil penetrates deeply into bearings to deliver smooth rotation and consistent performance lap after lap. ⚙️ Advanced Bearing Protection The ceramic-enhanced formula reduces friction and heat buildup inside the bearing, allowing for smoother operation and improved drivetrain efficiency. It also helps protect bearings from wear, contamination, and moisture. 🏁 Built for Racing Performance Designed for racers who demand maximum efficiency, DOPE bearing lube helps maintain free-spinning bearings and consistent performance, which can translate to better acceleration, improved drivetrain efficiency, and longer component life. ⚡ Features Premium double ceramic bearing lubricant Reduces friction and heat inside bearings Helps extend bearing lifespan Improves drivetrain efficiency and smoothness Penetrates bearings for long-lasting lubrication Ideal for RC cars, trucks, and other high-speed applications 📦 Includes (1) 10ml Bottle of R1WURKS DOPE Double Ceramic Bearing Lube A great maintenance product for keeping your RC bearings running smooth, efficient, and protected during intense racing conditions.  

Read more less

Built for national-level competition, the Trinity Slot Machine 2 Certified 13.5T Brushless Motor delivers elite performance, precision throttle control, and race-proven consistency. Each certified motor is hand-selected for top performance and includes a dyno sheet verifying peak output, giving racers confidence in their equipment right out of the box. Designed for competitive stock-class racing, this sensored motor provides smooth power delivery and excellent efficiency on the track. 🏁 Competition-Level Performance The Slot Machine 2 motor features a precision sensored design that ensures smooth throttle response and predictable power delivery. This makes it ideal for tight, technical tracks where consistent control and acceleration are critical. A highly machined aluminum motor can reduces weight while dramatically improving heat dissipation, helping maintain performance during long mains and qualifying heats. ⚙️ Tunable & Race Ready The motor includes a tunable endbell with laser-etched timing marks, making timing adjustments quick, precise, and repeatable for racers dialing in their setup. Each certified version is hand selected and dyno tested, ensuring it meets Trinity’s top performance standards. ⚡ Features Certified hand-selected high-performance motor Includes dyno sheet verifying peak performance Sensored brushless design for smooth throttle response Lightweight heavily machined aluminum motor can Improved cooling and heat dissipation Adjustable timing with laser-etched endbell markings Designed for high-level competition racing ROAR approved for sanctioned events 📦 Includes (1) Trinity Slot Machine 2 Certified Brushless Motor (13.5T) Dyno performance readout Designed for racers who want proven dyno-tested performance and championship-level reliability, the Trinity Slot Machine 2 Certified motor is built to perform when it matters most.

Read more less

The Team Associated 92516 RC10B7 Rear Suspension Arms (81mm) are an optional geometry upgrade compared to the standard 78mm rear arms. While 78mm arms are the direct replacement, these 81mm arms are designed for racers looking to experiment with rear suspension geometry, stability, and tuning options. ⚠️ IMPORTANT – NOT A DIRECT BOLT-ONThese 81mm arms require additional parts to install correctly. This is not a simple swap, and is recommended for racers comfortable with setup changes. What’s Different vs 78mm Arms Longer 81mm arm length Changes rear geometry and axle position Results in a 1mm total rear width difference Requires different rear hub offset and drivetrain parts Required Parts for 81mm Conversion To run these arms properly, the following parts are required (per Team Associated supplement): RC10B7 Rear Hub Set, -4mm Offset (P/N 92518) HD CVA Bones, 71mm (P/N 92549) B74 CVA Axle, 66mm (P/N 92207) 1mm Wider Hex 1 Higher Axle Height Setting Features Genuine Team Associated option part Durable molded composite construction Designed for RC10B7 platform Allows advanced rear suspension tuning Compatibility RC10B7 with required supporting components Who This Is For Racers tuning rear grip and stability Builders experimenting with alternative geometry Not recommended as a basic replacement arm 🏁 Pro Tip: Make sure all required parts are installed together to maintain correct drivetrain alignment and handling.

Read more less

Upgrade or replace your steering hardware with the XRAY Composite Extended Steering Servo Arm Set. Designed for precision and durability, these servo arms provide a secure fit and consistent steering response for XRAY competition platforms. Manufactured from high-quality composite material, each arm is precision machined for accurate spline engagement and easy installation right out of the package. Features & Benefits: High-quality composite construction for strength and durability Extended design for precise steering geometry Precision machined for accurate spline fit Easy installation with consistent steering performance Compatibility: XRAY XB4 XRAY XT2 1/10 Dirt & Carpet Competition Buggy and Stadium Truck platforms Includes: (1) 23T servo arm (1) 25T servo arm A clean, reliable replacement set to keep your XRAY steering system tight and responsive on any surface.    

Read more less

The ProTek RC Braided Brushless Motor Sensor Cable is a premium replacement sensor wire designed for sensor-based brushless motor systems that use removable sensor harnesses. Built for reliability and durability, this cable ensures clean, consistent signal transfer between your ESC and motor—race after race. Why You’ll Want It This cable uses individual silicone-shielded sensor wires wrapped in a black braided nylon sleeve, giving it excellent flexibility while protecting against abrasion, vibration, and shock. Shrink-wrapped ends keep everything secure and tidy, making it ideal for high-performance racing environments where reliability matters most. Features Compatible with most sensor-based brushless ESC & motor systems Individual silicone-shielded sensor wires for flexibility Braided nylon outer sheath for abrasion and impact protection Shrink-wrapped ends for durability and clean routing Smooth, reliable data transfer between ESC and motor Lightweight and race-proven design Specifications Length: 90mm Part Number: PTK-2107 Type: Brushless Motor Sensor Cable Wire Protection: Braided nylon sleeve with silicone-shielded internal wires Perfect for racers looking to replace a worn sensor wire or upgrade to a more durable, track-ready option that won’t hold your electronics back.

Read more less

Give your RC10B84 the world-class aero advantage it deserves with the JConcepts S15 Buggy Body. Debuted at the IFMAR World Championships, the S15 blends proven design cues from the Punisher, Finnisher, and Silencer series into a modern, high-downforce shell built for competition on carpet, turf, or dirt. Available in Standard or Lightweight versions to match your driving style and track conditions. Why Racers Choose the S15 The S15 is engineered for sharp cornering, stable straight-line tracking, and smooth airflow management. With its balanced single-cockpit layout, chamfered side pods, aggressive roof fin, and sculpted rear spoiler, this body offers increased stability without compromising steering response. It also provides generous room for decals and logos—perfect for sponsored or team drivers. Key Features IFMAR World Championship-winning S15 body design Optimized deflection angles & refined side pod winglets Centerline roof fin for improved tracking and durability Rear spoiler shape adds consistent rear downforce Tight, efficient chassis fit for max aero performance Trimmable rear section helps vent heat from electronics Available in Standard or Lightweight material options Includes (1) JConcepts RC10B84 S15 Clear Buggy Body (2) JConcepts Turf/Carpet/Dirt Wings (1) Decal Sheet (1) Window Mask Set Notes Body ships clear and unpainted Painted example shown for reference only

Read more less

Dial in your setup with absolute confidence! The 1UP Racing Pro Pit Scale delivers ultra-fine accuracy, making it the perfect tool for weighing parts, tires, diffs, hardware, and more. Whether you're chasing consistency, balancing components, or fine-tuning for race day, this compact powerhouse gives you the precision trusted by top-level racers. Engineered with a 0.01g resolution, 500g capacity, and a crisp blue backlit LCD, the Pro Pit Scale is built for serious tuning in any pit environment. A stainless steel weighing platform, laser-etched branding, and a protective cover complete the professional-grade feel. Key Features: ✔️ 0.01g Precision – High-resolution measurement for pro-level tuning✔️ 500g Capacity – Perfect for tires, diffs, hardware, and small components✔️ Stainless Steel Platform – Durable, stable, and easy to clean✔️ Blue Backlit LCD – Clear visibility in any lighting✔️ Laser-Etched 1UP Logos – Clean, premium aesthetic✔️ 9 Weighing Modes – Versatile for all hobby and workshop uses✔️ Full-Capacity Tare Range – Zero out trays or containers instantly✔️ Protective Cover & Parts Tray Included – Ready for pit bench or travel Includes: (1) 1UP Racing Pro Pit Scale (2) AA Batteries (1) Protective Cover / Parts Tray Specifications: Capacity: 500g (17.637oz) Resolution: 0.01g (0.00035oz) Overall Size: 5 × 4.17 × 0.74 in (127 × 106 × 19mm) Platform Size: 3.93 × 3.93 in (100 × 100mm)

Read more less

The 1RC Racing 1/18 Servo Extension Wire is a direct replacement part designed for the 1RC Racing 1/18 chassis lineup. Perfect for extending servo reach or cleanly routing wires through your setup, this high-quality extension ensures a secure, low-resistance connection between components. ⚙️ Features: Genuine 1RC Racing replacement part 100mm length for flexible installation Durable, high-quality wire construction for reliable signal transfer Ideal for clean wire management on your 1/18 scale setup 📦 Includes: (1) 1RC Racing 1/18 Servo Extension Wire (100mm)  

Read more less

Upgrade your aero package with the JConcepts Aero Front Wing — purpose-built for the Team Associated RC10B84 4WD buggy. Developed alongside top pro drivers, this radical, edgy wing design enhances steering response, downforce, and stability, giving you the extra front-end grip needed to push harder in corners and over jumps. The lower front-mounted design delivers balanced handling and complements JConcepts’ Punisher, Finnisher, Silencer, and S15 bodies, completing your high-performance setup. 🏆 Proven Performance:Used to TQ and win the 2025 IFMAR 1/10 Off-Road World Championships in Castle Hills, Australia — proof of world-class design and engineering. ⚙️ Features: Original JConcepts Aero design for the RC10B84 platform Radical, edgy styling improves steering and high-speed stability Lightweight yet durable for racing abuse Includes cut lines and dimple marks for precise trimming and easy mounting Perfect complement to JConcepts 1/10 off-road buggy bodies Mounts directly to the front gearbox of the Team Associated B84 📏 Specifications: Part Number: 0534 Vehicle Compatibility: Team Associated RC10B84 4WD Buggy Material: Lightweight polycarbonate Quantity: 2 wings per package 📦 Includes: (2) JConcepts Aero Front Wings Mounting and trimming guide 💡 Pro Tip:Pair this front wing with a JConcepts S15 or Finnisher body for a fully optimized aerodynamic setup that delivers quicker corner entry and improved jump control — proven on the world stage.  

Read more less

Durable factory replacement for the XB2 1/10 Buggy Overview:The XRAY XB2 Hard Graphite Composite Rear Suspension Arm delivers race-proven durability and precision handling for your XB2 1/10 buggy. Manufactured from XRAY’s exclusive hard graphite-reinforced composite, this arm provides the perfect balance of stiffness and flex—ideal for high-traction surfaces and competitive racing. About the Rear Suspension ArmThis left-side rear arm features XRAY’s signature design for smooth suspension movement and maximum impact strength. The hard graphite material improves cornering consistency and reduces flex under load, providing a more responsive feel and better traction balance across a range of track conditions. Features: Genuine XRAY Factory Team part Hard graphite composite for increased stiffness and reduced flex Provides improved steering precision and consistent cornering Ideal for high-grip indoor and outdoor tracks Precision-molded for perfect fit and geometry Lightweight yet highly durable construction Specifications: Part Type Rear Suspension Arm (Left) Material Hard Graphite Composite Vehicle Compatibility XRAY XB2 1/10 2WD Buggy Position Rear – Left Side Includes: (1) Hard Graphite Composite Rear Suspension Arm (Left)

Read more less

Upgrade your buggy’s performance with the Team Associated RC10B84 Factory Team Carbon Chassis Brace Set. Designed for the RC10B84 1/10 4WD Off-Road Electric Buggy Kit, this optional Factory Team upgrade delivers increased chassis rigidity without adding unnecessary weight. ✅ Rigid & Lightweight – Carbon construction improves stiffness while keeping weight low✅ Enhanced Handling – Added rigidity boosts steering response and overall control✅ Factory Team Quality – Precision-engineered to fit seamlessly✅ Easy Installation – A practical upgrade for serious racers Includes: (1) RC10B84 Factory Team Carbon Chassis Brace Set Compatibility: Team Associated RC10B84  

Read more less

Upgrade the drivetrain of your XRAY XB4 2024/2025 with the Exalt Hybrid-XSN Ceramic Bearing Kit. Featuring a precision-engineered hybrid design, these bearings pair Silicon Nitride ceramic balls with stainless steel inner/outer rings for smoother operation, higher speed, and greater impact resistance than traditional full steel or full ceramic bearings. Pre-lubricated with Exalt Oil Slick Hi-Speed PTFE Bearing Oil, this kit provides out-of-the-box performance that’s built for the demands of racing. 🔥 Key Features: Designed for the XRAY XB4 2024 & 2025 1/10 4WD Buggy Hybrid design: Silicon Nitride ceramic balls + stainless steel rings Faster and smoother than all-steel bearings More impact-resistant than full ceramic bearings Lightly lubricated with Exalt Oil Slick Hi-Speed PTFE Bearing Oil (EXA9314) Serviceable: clean with citrus cleaner or acetone, re-lube as needed Built for maximum performance in both spec and modified racing ✅ Compatibility: XRAY XB4 2024 XRAY XB4 2025 📦 Includes: (16) Hybrid-XSN Ceramic Bearings (complete kit for XB4 2024/2025) ⚠️ Tip:Check your bearings before each race day and re-oil as needed to ensure peak drivetrain efficiency and extended bearing life.  

Read more less

Upgrade your RC10B74's steering performance with the 9-degree Caster Blocks from Team Associated. Designed for precision and durability, these caster blocks deliver improved cornering stability and increased on-power steering response. 🛠️ Key Features: 9° caster angle for improved handling characteristics Factory Team quality with tight manufacturing tolerances Durable composite construction Direct fit for RC10B74 front suspension 📦 Includes: (1) Pair of 9° Caster Blocks (left & right) ✅ Compatibility: Team Associated RC10B74 and variants (check manual for specific fitment) Ideal for racers looking to fine-tune front-end geometry to suit different track conditions. A must-have tuning option for competitive setups.

Read more less

Fine-tune your RC10B74.2’s rear suspension geometry with this Rear Gearbox Adjustable Height Insert Set. Whether you're dialing in anti-squat or adjusting rear drive angles, these inserts give you the flexibility to get the most out of your setup. 📌 Key Features: Precision-molded plastic insert set Allows for rear gearbox height adjustment Fine-tune rear suspension geometry and anti-squat Designed specifically for RC10B74.2 and RC10B74.2D platforms 📦 Includes: Multiple insert pairs for adjustable configurations Designed to work with standard rear gearbox components ✅ Compatibility: RC10B74.2 RC10B74.2D Ideal for racers looking to squeeze out extra performance on varying track conditions — essential for serious 1/10 4WD competition setups.

Read more less

Keep your drivetrain dialed in with the Factory Team Decoupled Slipper Thrust Bearing Rebuild Set for the RC10B74.2. Designed specifically for the decoupled slipper assembly, this kit includes everything needed to service the thrust bearing for smooth operation and consistent performance on the track. 📌 Key Features: Genuine Team Associated Factory Team part Restores slipper clutch smoothness and reliability Precision components for minimal friction Essential for regular maintenance of decoupled slipper setups 📦 Includes: Complete thrust bearing rebuild components (washers, balls, etc.) Enough to fully service one decoupled slipper thrust bearing assembly ✅ Compatibility: RC10B74.2 with Factory Team Decoupled Slipper System

Read more less

Team Associated RC10B74.2 FT Center Dogbone Blades (Part #92374) Keep your drivetrain running smooth and efficient with the Factory Team Center Dogbone Blades for the RC10B74.2. These precision-machined blades are engineered to reduce friction, minimize wear, and provide consistent performance under extreme racing conditions. A must-have for serious 1/10 4WD racers looking to maintain their competitive edge. 📌 Key Features: Genuine Factory Team upgrade Designed specifically for center dogbones Reduces friction and drivetrain wear Improves longevity and performance Lightweight and durable material 📦 Includes: (4) Center Dogbone Blades ✅ Compatibility: Team Associated RC10B74.2 RC10B74.2D May also fit other B74 variants with center dogbone setup

Read more less

The Team Associated Factory Team Steering Block Arms +2 are a precision upgrade for your RC10B74 series vehicle. With a 2mm longer length than stock, these arms enhance steering geometry for improved handling and tuning options—especially beneficial on high-bite surfaces where extra steering stability is critical. 📌 Key Features: +2mm longer for refined steering geometry Factory Team upgrade for precision fit and durability CNC-machined for consistent performance Ideal for tuning your RC10B74.2 to specific track conditions 📦 Includes: (1) Left Steering Block Arm (+2) (1) Right Steering Block Arm (+2) ✅ Compatibility: RC10B74 RC10B74.1 RC10B74.2

Read more less

Overview:Maintain precise steering response with the Team Associated RC10B84 Steering Links & Pivot Ball Sockets. Designed as genuine factory replacements, these parts restore proper geometry and eliminate unwanted slop when your originals show signs of wear. Perfect for racers who demand consistent handling and durability from their B84. Features: Complete set of steering links and pivot ball sockets Molded to factory specs for perfect fitment Durable construction withstands the demands of racing Direct replacement for worn or damaged parts Genuine Team Associated replacement part Compatibility: Team Associated RC10B84 1/10 4WD Buggy Includes: (2) Steering Links (4) Pivot Ball Sockets Part Number: 92523 ⚡ Pro Tip: Combine these with the RC10B84 turnbuckle set (92558) for a fully refreshed and precise steering assembly.

Read more less

Upgrade your shocks with the XRAY Aluminum Shock Cap Nuts. Machined from premium Swiss 7075 T6 aluminum, these cap nuts include a precision vent hole that allows trapped air to escape during assembly for smoother and more consistent shock performance. Features: CNC-machined from high-quality Swiss 7075 T6 aluminum Integrated vent hole for bubble-free shock bleeding Designed for Big Bore shocks Hard-anodized finish for long-lasting durability Lightweight design without sacrificing strength Includes: (2) Aluminum Shock Cap Nuts with Vent Hole Compatibility: XRAY XB2 (2WD Buggy) XRAY XT2 (2WD Stadium Truck) XRAY XB4 (4WD Buggy) Other XRAY models equipped with Big Bore shocks (check manual)

Read more less

The XRAY Differential Gasket Set is a must-have replacement pack for maintaining smooth, leak-free differential performance. Made from precision-cut, high-quality material, these gaskets create a perfect seal to keep diff oil where it belongs and extend the life of your drivetrain. Features: Precision fit to ensure consistent diff sealing High-quality material resists wear and compression Maintains smooth, reliable differential action Essential for regular maintenance and rebuilds Includes:(4) Differential Gaskets Compatibility: Fits XRAY differentials across multiple platforms (commonly used in XB2, XB4, XT4, and related models)

Read more less

Upgrade your XRAY XB4 with the 2025 Carbon Fiber Rear Shock Tower designed for the HS (High Strength) bulkhead. Featuring a 3-dot configuration, this tower is precision CNC-machined from premium carbon fiber to deliver the perfect balance of strength and low weight. Optimized geometry improves suspension performance, durability, and consistency, giving you an edge on today’s demanding tracks. Features: Genuine XRAY factory part for the XB4 2025 CNC-machined from premium carbon fiber 3-dot shock position design for precise tuning Lightweight yet highly durable construction Direct replacement for the stock shock tower Designed for use with HS bulkhead Includes:(1) Carbon Fiber Rear Shock Tower (HS Bulkhead) – 3 Dots Compatibility: XRAY XB4 2025 (with HS Bulkhead) May fit earlier XB4 models when converted with HS bulkhead system    

Read more less

The XRAY Graphite Composite Steering Block is a high-strength upgrade designed to improve steering precision and durability on your XB4 buggy. Constructed from graphite-reinforced composite, it reduces flex while keeping weight low — giving you sharper, more predictable control in every corner. About the Steering BlockWith an optimized geometry for smoother Ackermann response and consistent steering feel, this steering block is ideal for today’s high-grip racing conditions. Its tough composite material ensures reliability through hard impacts and long race days. Features: Graphite-reinforced composite construction for maximum rigidity Optimized geometry for precise steering response Lightweight and durable race-proven design Direct replacement for the stock steering block Includes:(1) Graphite Composite Steering Block Compatibility: XRAY XB4 1/10 4WD Buggy (2022+ models, check manual for fit)

Read more less

🏁 Factory Team Efficiency UpgradeSwap in the Factory Team molded ring & pinion to reduce rotating mass and keep your B84’s diff running smooth and quiet. Precision-molded tooth profiles deliver consistent mesh and improved drivetrain efficiency. ⚙️ Features: ✅ Molded construction for lighter rotational mass and quieter operation ✅ Factory Team quality for precise tooth geometry and smooth mesh ✅ Direct fit for the RC10B84 differential ✅ Ideal spare or performance swap for efficiency-focused setups 📦 Includes: (1) Molded Ring Gear (1) Molded Pinion Gear 💡 Pro Tip: Great for stock-class efficiency. If you run high-power/mod setups, keep an eye on wear and diff shim settings to maintain a perfect mesh.  

Read more less