The XRAY XB4 2022 Composite Battery Clamp Set is a direct replacement designed to securely hold your battery in place during the most demanding race conditions. Molded from durable composite material, these clamps offer a lightweight and reliable solution while maintaining the factory fit and finish. Features: Precision-molded composite construction Lightweight and durable design Direct fit replacement for the XRAY XB4 2022 Ensures secure battery retention under racing stress Includes:(2) Composite Battery Clamps        

Read more less

Unleash extreme power and efficiency with the Gens Ace Redline 2.0 2S LiHV 8500mAh 140C Battery. Engineered for competitive RC racing, this pack combines massive capacity, ultra-low internal resistance, and a high 140C discharge rate to deliver stable voltage, explosive acceleration, and unmatched endurance. Perfect for racers who demand consistent performance through the entire run. 🔥 Key Features: High Voltage (LiHV) 7.6V output for maximum speed and power 140C continuous discharge for exceptional punch and consistency 8500mAh capacity delivers long runtime and balanced weight Factory-matched cells for uniform voltage, capacity, and resistance Low IR design ensures stable voltage under heavy load 5mm bullet connectors provide secure, low-loss connections Built using stable automatic stacking technology for reliability Lightweight and low-profile design for chassis balance and fit 📐 Specifications: Nominal Voltage: 7.6V (2S LiHV) Capacity: 8500mAh Continuous Discharge: 140C Charge Rate: 1C (8.5A max recommended) Configuration: 2S1P Watt Hours: 64.4Wh Battery Connector: 5mm Bullet Balance Connector: 2mm Bullet Dimensions (L×W×H): 139 × 47 × 25mm Weight: 10.65oz (302g) ✅ Compatibility: Ideal for 1/10 & 1/8 scale surface applications Perfect for Team Associated, XRAY, TLR, Yokomo, and Schumacher racing platforms Works with Touring Car (TC6/TC7 series), 4WD Buggies, Truggies, and Short Course Trucks requiring 2S packs 📦 Includes: (1) Gens Ace Redline 2.0 2S LiHV 8500mAh 140C Battery (1) Set of 5mm Bullet Connectors ⚠️ Important Safety Information: Always balance charge using a LiPo-compatible charger and LiPo safe bag. Never leave charging batteries unattended. Do not overcharge or discharge below 3.2V per cell. Allow batteries to cool completely before recharging. Follow proper break-in procedure for new packs (first 5 cycles at 50% discharge). 🏎️ Recommended For: 1/10 & 1/8 scale Buggy, Truggy, Touring Car, and Short Course Truck racing Ideal for spec and modified classes needing high voltage and long runtime

Read more less

Upgrade your drivetrain durability with the Team Associated RC10B74.1 Aluminum Center CVA Cups. This pair of precision-machined aluminum cups is designed to replace the stock units and withstand the demands of high-torque applications. Perfect for racers looking to reduce rotational mass while improving strength and longevity over stock plastic parts. 🔩 Key Features: Lightweight and durable aluminum construction Precision-machined for optimal fit and performance Direct replacement for stock CVA center cups Helps reduce rotational mass Improved strength for high-torque conditions 📦 Includes: (2) Aluminum Center CVA Cups ✅ Compatibility: Team Associated RC10B74.1 May fit other B74-series vehicles (check manual for fitment) Maintain peak drivetrain performance under pressure with this Factory Team upgrade.

Read more less

Upgrade your steering setup with the Team Associated Factory Team +1 Steering Block Arms, designed to improve cornering response and handling consistency. These +1mm arms provide a subtle but impactful change to the steering geometry, offering increased tunability for your RC10B74 series buggy—especially on smooth or high-traction tracks. 📌 Key Features: +1mm length for refined steering characteristics Factory Team precision upgrade Durable, CNC-machined composite construction Ideal for racers tuning for surface-specific handling 📦 Includes: (1) Left Steering Block Arm (+1) (1) Right Steering Block Arm (+1) ✅ Compatibility: RC10B74 RC10B74.1 RC10B74.2

Read more less

Overview:Keep your electronics secure and cool with the Team Associated RC10B84 Battery Holder & Fan Mount Set. Designed for the RC10B84, this set provides a lightweight, durable solution to lock your battery firmly in place while also offering a dedicated mount for a cooling fan. Perfect for racers pushing their buggy to the limit, it ensures both stability and reliable cooling during long runs or high-traction racing. Features: Secure, lightweight battery holder designed for the B84 chassis Integrated fan mount to keep electronics running cool Durable construction with precision fit Direct replacement or upgrade for easy installation Genuine Team Associated factory part Compatibility: Team Associated RC10B84 1/10 4WD Buggy Includes: (1) Battery Holder (1) Fan Mount Required mounting hardware Part Number: 92505 ⚡ Pro Tip: Pair this set with a 30mm or 40mm high-RPM fan for maximum cooling efficiency during long mains or hot outdoor racing conditions.

Read more less

Overview:Dial in your drivetrain with the Team Associated RC10B84 Differential Height Inserts. These precision-molded inserts allow you to easily adjust the height of the differentials in your B84, fine-tuning traction, handling balance, and driveshaft angles for any track condition. A critical tuning option for racers looking to maximize consistency and performance. Features: Precision-molded inserts for differential height adjustment Fine-tunes traction and balance by changing driveshaft angles Quick and easy to install or swap at the track Durable and lightweight construction Genuine Team Associated tuning accessory Compatibility: Team Associated RC10B84 1/10 4WD Buggy (front and rear differentials) Includes: (1) Set of Differential Height Inserts (various heights) Part Number: 92513 ⚡ Pro Tip: Use a lower diff height for improved stability and traction on bumpy or low-grip tracks, and a higher diff height for increased corner speed and sharper handling on high-grip surfaces.  

Read more less

The XRAY Differential Gasket Set is a must-have replacement pack for maintaining smooth, leak-free differential performance. Made from precision-cut, high-quality material, these gaskets create a perfect seal to keep diff oil where it belongs and extend the life of your drivetrain. Features: Precision fit to ensure consistent diff sealing High-quality material resists wear and compression Maintains smooth, reliable differential action Essential for regular maintenance and rebuilds Includes:(4) Differential Gaskets Compatibility: Fits XRAY differentials across multiple platforms (commonly used in XB2, XB4, XT4, and related models)

Read more less

The XRAY XB4 2025 Composite Rear Lower Left Suspension Arm (Hard) is built from a stiff composite blend to maximize durability and precision. With its 3-hole shock mounting layout, this left-side arm offers multiple tuning positions while the hard material minimizes flex. Perfect for smooth, high-grip surfaces where consistency and sharp handling response are critical. Features: Factory XRAY part for the XB4 2025 Hard composite material for reduced flex and added strength 3-hole shock mount design for advanced suspension tuning Left-side rear suspension arm replacement Engineered for precision handling in demanding race conditions Includes:(1) Composite Rear Lower Left Suspension Arm – Hard (3-Hole) Compatibility: XRAY XB4 2025 May also fit select earlier XB4 models (verify with manual/parts list)

Read more less

The XRAY XB4 2025 Composite Rear Lower Right Suspension Arm (Hard) is molded from a stiffer composite blend to deliver maximum precision and durability. Featuring a 3-hole shock mounting design, this arm gives racers tuning flexibility while reducing unwanted flex in high-bite conditions. The harder material increases cornering consistency and improves handling response on smooth, high-grip tracks. Features: Genuine XRAY factory part for the XB4 2025 Molded from hard composite material for reduced flex 3-hole shock mounting for fine-tuned suspension geometry Right-side rear arm replacement Optimized for high-grip or smooth racing surfaces Includes:(1) Composite Rear Lower Right Suspension Arm – Hard (3-Hole) Compatibility: XRAY XB4 2025 May also fit earlier XB4 models (check manual/parts list)  

Read more less

⚙️ Precision Front Drivetrain HousingThe Team Associated RC10B84 Front Gearbox is a direct replacement part engineered to keep your buggy’s front drivetrain running smoothly. Made from durable composite material, this gearbox housing ensures proper alignment of your front diff and gears, maintaining consistent performance under the rigors of racing. 🔧 Features: ✅ Genuine Team Associated replacement part for the RC10B84 ✅ High-strength molded composite construction ✅ Keeps gears and differential securely in place ✅ Restores drivetrain efficiency after wear or damage 📦 Includes: (1) Front Gearbox Housing    

Read more less

📌 Restore Factory Suspension PerformanceThe Team Associated RC10B84 Front Shock Tower is a direct replacement part designed specifically for the B84 platform. Built to factory specs, this tower keeps your suspension geometry true, ensuring consistent handling and durability on the track. ⚙️ Features: Precision-molded for a direct RC10B84 fit Maintains correct suspension geometry Strong and lightweight construction Ideal replacement for worn or damaged shock towers 📦 Includes: (1) RC10B84 Front Shock Tower 💡 Pro Tip: Keep both front and rear shock towers in your pit box—having spares on hand is the fastest way to recover from a hard crash and get back in the race.  

Read more less

Team Associated RC10B84 Body – Clear (92554) 🏁 Race-Optimized Replacement – Designed specifically for the RC10B84 platform, this low-profile clear body delivers improved aerodynamics and the clean, aggressive Factory Team look. Perfect for racers who want both performance and a fresh canvas for custom paint schemes. ⚙️ Features:✅ Low-profile design for enhanced aerodynamics✅ Molded from durable, lightweight polycarbonate✅ Clear shell – ready for your custom paint job✅ Factory Team fit and finish for competitive racing 📦 Includes: (1) Clear RC10B84 Body (unpainted) 🔧 Compatibility: Team Associated RC10B84 💡 Pro Tip: Pair this body with lightweight wing options to further dial in downforce and stability for your track conditions.    

Read more less

Restore smooth, consistent differential performance with the Team Associated RC10B74.1 HTC Gear Differential Rebuild Kit V2. This kit includes all the high-quality components needed to service and refresh your HTC gear differential, ensuring optimal power delivery and handling. Features: Complete set of parts to rebuild one HTC gear differential Maintains smooth operation and consistent performance Genuine Team Associated quality for long-lasting reliability V2 version for updated fit and improved durability Compatibility: Team Associated RC10B74.1 May be compatible with other models using the HTC gear differential (check manual for fitment) Includes: All necessary seals, gaskets, and internal components to rebuild one HTC gear diff Perfect for keeping your buggy’s drivetrain running like new.  

Read more less

Boost your steering accuracy and reliability with the Team Associated Factory Team Aluminum Clamping Servo Horn. Built for 23-tooth servos, this 20mm horn features a clamping design that locks securely in place, preventing slippage under high loads. Features: CNC-machined aluminum for superior strength and precision Clamping design ensures a secure, slip-free connection 20mm length for tuned steering leverage and response Fits 23T spline servos Factory Team quality for pro-level durability and performance Includes: (1) Aluminum Clamping Servo Horn – 23T, 20mm Ideal for racers who want maximum steering control and long-lasting reliability.

Read more less

Team Associated RC10 4WD Ball Cups (20pcs) [6535] 🔧 Classic performance, restored! Refresh your vintage ride with this set of Team Associated RC10 4WD Ball Cups. Designed specifically for the RC10 Classic, RC10T, and RC10 Worlds editions, these molded plastic rod ends are built for strength, precision, and smooth suspension action. ✅ Direct replacement for factory originals✅ Secure fit on tie rods and turnbuckles✅ Restores tight, responsive steering and suspension✅ Made for RC10 Classic, RC10T, and RC10 Worlds Includes:(20) Ball Cups (Rod Ends) 📦 Part Number: 6535🏁 Brand: Team Associated

Read more less

Team Associated B64 Plastic Gear Differential Gear Set – ASC92076🔧 Smooth Power Transfer, Race-Ready Performance Keep your B64 running smooth with this genuine Team Associated Plastic Gear Differential Set. Whether you're rebuilding or replacing worn-out gears, this set includes everything needed for one full diff—ensuring reliable, consistent drivetrain performance on the track. ✅ Factory replacement for the RC10B64 series✅ Durable plastic gears for lightweight performance✅ Includes all internals needed for one differential rebuild 📦 Includes:• Complete internal gear set for one differential 🔢 Part Number: ASC92076🏁 Brand: Team Associated  

Read more less

This is a Team Associated Front Axle Crush Tube set, intended for use with the Team Associated RC10 B74 Team 1/10 4WD Off-Road Electric Buggy as replacement for the kit supplied front axel crush tubes. Includes: (2) Front Axle Crush Tubes 

Read more less

  Upgrade your slipper clutch with the Team Associated 19mm Octalock Slipper Pad. Featuring the Octalock design, this pad offers improved consistency, smoother power delivery, and longer-lasting performance compared to standard slipper pads. ✅ Octalock Design – Delivers smoother engagement and improved slipper consistency✅ Durable Material – Built to handle high power and repeated use✅ Direct OEM Replacement – Genuine Team Associated part for perfect fitment Includes: (1) 19mm Octalock Slipper Pad Compatibility: Team Associated vehicles equipped with 19mm Octalock spur gears and slipper assemblies (B6.2, B6.3, B6.4, T6.2, T6.4, SC6.2, SC6.4, and B74 series) Check your manual for exact fitment Part #: 92288

Read more less

Team Associated 3.5x42mm Steel Turnbuckles. These are replacement steering and front camber link turnbuckles intended for the RC10B74.2 and B74.2D series of vehicles. Package includes two 3.5x42mm turnbuckles. COMPATIBILITY: Team Associated RC10 B74.2Team Associated RC10 B74.2D

Read more less

The Team Associated RC10B74.1 Factory Team "Carbon" Side Rails are an optional upgrade for the Team Associated RC10B74 series models. These carbon fiber composite option parts are impregnated with rigid and light carbon fibers inside the injection molded material to create a lighter, more durable part with optimized rigidity to create the ultimate high performance composite part.Features: Lightweight: Approximately 12% weight savings over “hard” material. Extreme Rigidity: More predictable handling in high traction applications and increased vehicle stability in fast corners. Improved Durability: Significantly improved strength over “hard” option parts. COMPATIBILITY: Team Associated RC10 B74 OriginalTeam Associated RC10 B74.1Team Associated RC10 B74.1DTeam Associated RC10 B74.2Team Associated RC10 B74.2D

Read more less

Team Associated Factory Team RC10B6.4/B6.4D 3.5mm Titanium Turnbuckle Set. These are optional titanium turnbuckles intended for the Team Associated B6.4 and B6.4D platforms. Constructed from high quality titanium these offer increased durability over stock components. Package includes two titanium front camber links, two titanium rear camber links and two titanium steering links.. NOTE: 3.5mm Ballcups are required for installation (ASC92308). COMPATIBILITY: Team Associated RC10B6.4Team Associated RC10B6.4D

Read more less

Team Associated RC10B74 HD Differential Outdrives. These are replacement outdrives intended for the RC10B74 and RC10B74D buggies. Package includes two outdrives. COMPATIBILITY: Team Associated RC10 B74.2Team Associated RC10 B74.2D

Read more less

Pro-Motion Viper 2.2" Rear LP Carpet Buggy Tires (2) — C4 Red (Soft Compound)Part #: 3090-C4 Dialed for Grip. Designed to Win. The Pro-Motion Viper 2.2" Low-Profile (LP) Rear Buggy Tire is built for next-level performance on high-traction carpet and turf tracks. The LP carcass reduces sidewall flex for improved stability, while the directional tread with tapered mini pins delivers smooth, predictable traction. C4 Red compound brings the extra softness needed for maximum bite in low-grip or cooler conditions. ✅ Low-profile design for reduced flex and razor-sharp response✅ C4 Red soft compound optimized for maximum traction✅ Dual mini wedge edges + radial rib for stable, consistent grip✅ Directional tread for tunable performance✅ Ideal for modern carpet and turf racing 📦 Includes:(2) Viper 2.2" Rear LP Tires(2) Black Closed Cell Inserts 💡 Pro Tip: Run C4 in colder conditions or low-grip indoor tracks to bring your setup to life.

Read more less

Pro-Motion Viper 2.2" Rear LP Carpet Pre-Mount Buggy Tires (2) — Yellow (C3 Green/Medium)Part #: 3090-C3-Y Low-Profile Speed. Carpet-Tuned Control. Engineered for precision, the Pro-Motion Viper 2.2" LP Rear Buggy Tire is built to dominate on high-traction carpet and turf tracks. With a low-profile carcass for reduced sidewall flex and quicker response, the Viper delivers unmatched stability and cornering grip. Its tapered pin tread and directional radius pattern provide predictable traction, while mini wedges and a radial rib add versatility across various conditions. ✅ Pre-mounted on yellow wheels—ready to race✅ Low-profile carcass enhances response and stability✅ Tapered mini pin design for maximum grip✅ Directional tread for fine-tuned traction control✅ Designed for 1/10 scale carpet and turf racing✅ C3 compound for medium traction balance 📦 Includes:(2) Viper LP Rear Pre-Mounted Tires(2) Foam Inserts 💡 Pro Tip: Combine with Pro-Motion Slim Front LPs for a fully dialed-in carpet setup.

Read more less

Team Associated 7.8x3.5x2.0mm Aluminum Hub Spacer Washers – Blue (10) – Part 31389Maximum Spacing. Race-Ready Adjustability. The Team Associated 7.8x3.5x2.0mm Blue Aluminum Hub Spacer Washers (31389) are ideal for making larger wheelbase and hub spacing adjustments on RC8B3 and RC8T3 series vehicles—or any platform that uses 3.5mm hinge pins. Durable and lightweight, these aluminum washers are a reliable tuning option for racers who want full control over rear-end geometry. ✅ Size: 7.8mm OD x 3.5mm ID x 2.0mm thick✅ Anodized blue 7075 aluminum – high strength, low weight✅ Designed for wheelbase and hub spacing adjustments✅ Compatible with 3.5mm hinge pin platforms✅ Pairs perfectly with 0.5mm and 1.0mm spacers (sold separately) 📦 Includes: (10) 7.8x3.5x2.0mm Blue Aluminum Hub Spacer Washers Part #: 31389 💡 Pro Tip: Use thicker spacers like this to extend wheelbase for more high-speed stability or track-specific tuning.

Read more less

Team Associated 7.8x3.5x0.5mm Aluminum Hub Spacer Washers – Blue (10) – Part 31387Fine-Tune Wheelbase. Maximize Setup Precision. The Team Associated 7.8x3.5x0.5mm Blue Aluminum Hub Spacer Washers (31387) are perfect for adjusting wheelbase and tuning suspension geometry on vehicles with 3.5mm hinge pins. Commonly used on the RC8B3 and RC8T3 series, these lightweight spacers are also compatible with other platforms that accept 3.5mm hinge pins. ✅ Pack of 10 high-precision spacers✅ Size: 7.8mm OD x 3.5mm ID x 0.5mm thick✅ Blue anodized aluminum – lightweight and corrosion-resistant✅ Used for fine-tuning wheelbase and hub spacing✅ Compatible with RC8B3, RC8T3, and any vehicle using 3.5mm hinge pins✅ Also available in 1.0mm and 2.0mm thicknesses (sold separately) 📦 Includes: (10) 7.8x3.5x0.5mm Blue Aluminum Hub Spacer Washers Part #: 31387 💡 Pro Tip: Stack different thicknesses to get the exact rear end length or toe-in setup you're after.

Read more less

Team Associated FT Carbon Fiber Front Suspension Arms – ASC92297 Precision Performance for RC10B74.1 & B74.1D Upgrade your B74.1's front end with these Factory Team Carbon Fiber Front Suspension Arms, engineered for lightweight strength and high-traction performance. These arms deliver sharper, more stable handling, especially in fast corners and on high-grip tracks. ⚙️ Features: ✅ Carbon Fiber Construction – Extreme rigidity for responsive steering and stability ✅ 12% Lighter than “hard” material arms ✅ Boosted Durability – Significantly stronger than standard “hard” arms ✅ Factory Team quality for competition-level performance 📦 Includes: (1) Left Front Carbon Suspension Arm (1) Right Front Carbon Suspension Arm ✅ Compatibility: Team Associated RC10B74.1 Team Associated RC10B74.1D 🔧 Perfect for racers seeking precision handling and reduced unsprung weight.

Read more less

Team Associated RC10B74.2 FT Lightweight Driveline Center Kit – ASC92372 Maximize Efficiency. Minimize Rotational Mass. Take your RC10B74 to the next level with the Factory Team Lightweight Center Driveline Kit. Designed specifically for 13.5T Spec class racing, this kit reduces rotational mass by an impressive 19.3g compared to the standard steel setup—resulting in quicker acceleration and improved handling. ⚙️ Features: ✅ Reduces center driveline mass by 19.3g ✅ Includes lightweight dogbones and aluminum outdrives ✅ Plastic blade inserts reduce metal-to-metal wear ✅ Designed for use with center differential (not slipper) ✅ Ideal for 13.5T Spec racing class 📦 Includes: Lightweight center dogbones Aluminum outdrives Plastic blade inserts Complete hardware for installation ✅ Compatibility: RC10B74 RC10B74.1 RC10B74.1D RC10B74.2 RC10B74.2D ⚠️ Note: Not recommended for modified racing or use with slipper clutch systems. 🏁 Built for racers chasing every gram of performance advantage.

Read more less

Team Associated RC10B74.2 Differential Pinion Gear Shims (5x6.5x1mm) – ASC92319 Precision Spacing for Consistent Gear Mesh. These Factory Team 5x6.5x1mm differential pinion gear shims are designed specifically for the RC10B74.2 and B74.2D. Ideal for maintaining correct gear mesh and minimizing drivetrain wear, these shims ensure smooth differential operation and long-term performance. 🔧 Features: ✅ OEM-quality replacement shims ✅ Sized 5x6.5x1mm for perfect pinion gear fit ✅ Helps fine-tune gear mesh and reduce wear ✅ Compatible with RC10B74.2 & B74.2D 📦 Includes: (Set of) Differential Pinion Gear Shims (5x6.5x1mm) 🛠️ Keep your drivetrain dialed in with these must-have tuning components!

Read more less

Team Associated Aluminum LRC "D" Arm Mount – RC10B74.1 Optimize rear suspension geometry with precision. The ASC92261 Aluminum LRC "D" Arm Mount is a factory replacement part designed for the RC10B74.1 and B74.1D 1/10 scale 4WD electric buggies. Built from durable aluminum, this mount delivers enhanced strength and consistent performance under race conditions. ⚙️ Features: 🧱 CNC-machined aluminum for increased durability 📐 LRC (Low Roll Center) geometry helps fine-tune rear suspension behavior 🔧 Direct fit replacement for kit-supplied “D” arm mount 📦 Includes: (1) Aluminum LRC "D" Arm Mount ✅ Compatibility: Team Associated RC10B74.1 Team Associated RC10B74.1D Maintain your edge on the track with genuine Team Associated tuning components.

Read more less

🔌⚡ Clean Wiring. Reliable Signal. Low-Profile Design. The ProTek RC Flat Sensor Wire is designed to provide consistent, interference-free communication between your sensored brushless motor and ESC. With a slim, flat design, it keeps your build clean while improving wire routing in tight chassis layouts. 🏁 About This Sensor Wire 📏 Clean, Low-Profile Routing The flat cable design allows easy routing under components and through tight spaces, reducing clutter and improving overall build appearance. ⚡ Reliable Signal Transfer Engineered for consistent, interference-resistant communication, ensuring smooth motor performance in sensored brushless setups. 🎯 Perfect Fit Length At 150mm, this cable is ideal for a wide range of 1/10 scale applications and clean electronics layouts. 🔧 Key Features ✔ Low-profile flat cable design✔ Reliable signal transfer for sensored systems✔ Slim construction for easy routing✔ Helps reduce wiring clutter✔ Interference-resistant performance✔ Optimized for brushless motor/ESC communication 📦 Includes (1) Flat Sensor Wire (150mm) 📊 Specifications Length: 150mm 🧰 Recommended Use Sensored brushless motor to ESC connection Clean electronics installations Organized wiring setups  

Read more less

🏁 Clean Look. Lightweight Upgrade. Precision Fit. Upgrade your sway bar setup with this R1WURKS aluminum hardware set, designed to replace the stock components with a lightweight, blacked-out look and precise fit. 🏁 About the Sway Bar Hardware Set ⚙️ Lightweight & Durable Machined from high-strength 7075-T6 aluminum, these components offer a solid balance of durability and reduced weight. 🎯 Precision Fit CNC machining ensures accurate fitment and smooth operation, helping maintain consistent sway bar performance. 🖤 Clean, Blacked-Out Style Finished in matte black anodizing with subtle R1 laser-etched branding for a sleek, professional appearance. 🔧 Key Features ✔ 7075-T6 aluminum construction✔ Precision CNC-machined components✔ Matte black anodized finish✔ Laser-etched R1 branding✔ Lightweight sway bar balls✔ Direct replacement upgrade 📦 Includes (2) Sway Bar Bearing Collars (2) Sway Bar Balls (4) M3x3 Set Screws 🚗 Compatibility Team Associated RC10 SC7 Team Associated RC10 T7 Team Associated RC10 B84 Team Associated RC10 B84D Team Associated RC10 B7 Team Associated RC10 B7D 🏁 Simple upgrade. Clean look. Dialed performance.  

Read more less

Seal & Hardware Overview:This is a replacement differential seal and hardware set designed for the Team Losi Racing 22X-4 platform. It helps maintain proper differential sealing and ensures reliable operation. 🔧 Key Features ✔ Replacement diff seal and hardware set✔ Helps maintain proper sealing✔ Supports smooth differential performance✔ Direct fit design 📦 Includes Differential seals Associated hardware 🚗 Compatibility Team Losi Racing 22X-4 Ideal for maintenance or rebuilds, this set helps keep your differential sealed properly and performing consistently.  

Read more less

Ring Gear Overview:This is a replacement differential ring gear designed for the Team Losi Racing 22X-4 platform. It ensures proper drivetrain function and smooth power transfer through the differential. 🔧 Key Features ✔ Replacement differential ring gear✔ Maintains smooth drivetrain operation✔ Direct fit design 📦 Includes (1) Differential Ring Gear 🚗 Compatibility Team Losi Racing 22X-4 Ideal for replacing worn or damaged components, this ring gear helps keep your drivetrain running consistently and reliably.    

Read more less

Built for national-level competition, the Trinity Slot Machine 2 Certified 13.5T Brushless Motor delivers elite performance, precision throttle control, and race-proven consistency. Each certified motor is hand-selected for top performance and includes a dyno sheet verifying peak output, giving racers confidence in their equipment right out of the box. Designed for competitive stock-class racing, this sensored motor provides smooth power delivery and excellent efficiency on the track. 🏁 Competition-Level Performance The Slot Machine 2 motor features a precision sensored design that ensures smooth throttle response and predictable power delivery. This makes it ideal for tight, technical tracks where consistent control and acceleration are critical. A highly machined aluminum motor can reduces weight while dramatically improving heat dissipation, helping maintain performance during long mains and qualifying heats. ⚙️ Tunable & Race Ready The motor includes a tunable endbell with laser-etched timing marks, making timing adjustments quick, precise, and repeatable for racers dialing in their setup. Each certified version is hand selected and dyno tested, ensuring it meets Trinity’s top performance standards. ⚡ Features Certified hand-selected high-performance motor Includes dyno sheet verifying peak performance Sensored brushless design for smooth throttle response Lightweight heavily machined aluminum motor can Improved cooling and heat dissipation Adjustable timing with laser-etched endbell markings Designed for high-level competition racing ROAR approved for sanctioned events 📦 Includes (1) Trinity Slot Machine 2 Certified Brushless Motor (13.5T) Dyno performance readout Designed for racers who want proven dyno-tested performance and championship-level reliability, the Trinity Slot Machine 2 Certified motor is built to perform when it matters most.

Read more less

Upgrade your pit setup with the 1UP Racing Pro Pit Tray Set with Shock Stands Combo—a sleek, all-in-one workspace solution built for racers who demand organization, efficiency, and professional presentation. This complete pit system features precision-machined aluminum construction with a dual satin and gloss black finish for a high-end look. The tray is designed with the perfect depth, smooth filleted corners, and dedicated cutouts for differential outdrives, keeping parts secure and easy to access. Hidden magnets hold body clips in place and securely attach the included on-road and off-road shock stands. Both shock stands feature forged carbon trays and magnetically collapse into the included protective storage box with foam inserts, making transport clean and safe. Features Precision-machined aluminum pit tray Dual satin & gloss black finish Ideal tray depth with smooth filleted corners Hidden magnets for body clip storage Differential outdrive cutouts Includes on-road and off-road shock stands Shock stands magnetically attach to tray Forged carbon shock stand trays Protective storage box with foam insert included Includes (1) Pro Pit Tray (1) Off-Road Shock Stand (1) On-Road Shock Stand (1) Storage Box with Foam Insert A premium pit solution designed to keep your workspace organized, efficient, and race-ready—every time you wrench. 🏁  

Read more less