When performance matters, the Team Exalt X-Rated 5700mAh 2S LiPo is your ultimate power source. Designed with cutting-edge Silicon Graphene technology, this pack delivers exceptional efficiency, low resistance, and long-lasting power — giving you the edge you need lap after lap. ⚡ X-Rated Series Performance Highlights: 135C Continuous / 270C Burst Discharge Rate Silicon Graphene Cell Technology for improved efficiency and cycle life Flat Discharge Curve maintains consistent voltage under load Low Internal Resistance for cooler operation and more punch 5mm High-Amp Bullet Connectors ensure high current throughput ROAR Approval Pending 📊 Battery Specifications: Capacity: 5700mAh Voltage: 7.4V (2S) Discharge Rate: 135C Burst Rate: 270C Weight: 227g ± Dimensions: 96 x 47 x 25.1mm (LxWxH) Connector Type: 5mm Bullets Whether you're pushing your electronics to the limit or chasing consistency in long mains, the EXA3202 X-Rated LiPo gives you the confidence to run harder and longer.

Read more less

Team Exalt X-Rated 2S 135C HVX LiHV LCG Shorty Battery (7.6V/5100mAh) High Voltage. Race Ready. ROAR Approved. Give your setup the edge it deserves with the Team Exalt X-Rated HVX LiHV Battery. Built for competition, this 7.6V 2S LCG pack combines advanced chemistry, low resistance, and Silicone Graphene tech for powerful, consistent output and longer cycle life. The hardcase shorty design makes it perfect for tight 1/10 chassis builds where balance and performance are critical. ⚙️ Features: ✅ 135C Continuous Discharge Rate for maximum punch ⚡ LiHV (7.6V) design for high-voltage performance 🧠 Silicone Graphene Technology for lower IR and longer life 🔌 5mm High-Amp Bullet Connectors included 🏁 ROAR Approved since Dec. 2024 – race legal and track ready 🧊 LCG Hardcase to fit snug in shorty-compatible chassis 📐 Specifications: Voltage: 7.6V (LiHV 2S2P) Capacity: 5100mAh Continuous Discharge: 135C Dimensions: 96 x 46 x 22.5mm (LxWxH) Weight: 210g (7.40oz) Connector Type: 5mm bullets Balance Plug: 2mm bullets Watt Hours: 38.8Wh Charge Rate: 1C Max Configuration: LCG Hardcase Shorty ROAR Approved ✅ 💥 Optimized for elite 1/10 scale racing in both off-road and on-road platforms.Stay cool, stay powerful — Exalt X-Rated gets you to the finish line faster.  

Read more less

  The Team Associated Factory Team 5x12x4mm Bearings are precision replacement bearings designed to restore smooth operation and reliable performance in critical drivetrain and rotating assemblies. Built to Factory Team standards, these bearings help reduce friction, improve efficiency, and maintain consistent performance on the track. Ideal for replacing worn bearings during maintenance or rebuilds to keep your vehicle operating at peak performance. Features Genuine Team Associated Factory Team bearings Precision construction for smooth rotation Helps reduce drag and improve efficiency Ideal for maintenance or performance rebuilds Factory-fit replacement Includes (4) 5x12x4mm Bearings Compatibility Team Associated RC10 B74 Other applications requiring 5x12x4mm bearings A dependable replacement choice for maintaining smooth, consistent performance in your RC vehicle. 🏁

Read more less

The JConcepts Carpet/Astro High-Clearance 7" Rear Wing is engineered specifically for modern carpet and AstroTurf racing conditions. Featuring a short-chord design for quick rotation and a flat base for increased tire clearance, this wing delivers the balance racers want between downforce and low drag on high-speed layouts. Built from durable material, the wing includes clipped rear corners to improve rigidity and reduce breakage, along with a traditional rear trim-line to fine-tune aerodynamic balance. Large radius cut-outs in the side dams allow for greater rear tire expansion and flex, while dual stability fangs reinforce the structure from front to rear. Maintaining a high-angle vertical rear dam, the HCW provides predictable handling and confidence through fast sections. Multiple cut lines allow racers to customize trim and feel, making this wing one of the most tunable aerodynamic options for 1/10 off-road racing. Features Innovative 7" High-Clearance Wing (HCW) design Short-chord profile for quicker rotation Flat base increases rear tire clearance Clipped rear corners minimize breakage Large side-dam openings for tire expansion and flex Dual stability fangs for added structural strength Pro-level height and rake angle Designed for carpet & AstroTurf racing Compatibility Fits most 1/10 scale off-road buggies Includes (2) JConcepts Carpet/Astro High-Clearance 7" Rear Wings  

Read more less

Keep your differential running smooth and leak-free with the Team Associated 91782 Gear Differential Seals. Designed as a direct replacement for the B6.1 and B6.1D platforms, these seals restore proper diff performance, maintain consistent fluid viscosity, and help extend the life of your internal diff components. Perfect for routine maintenance or a full differential rebuild. Features Genuine Team Associated replacement seals Ensures proper diff sealing and fluid retention Helps maintain smooth, consistent differential action Ideal for rebuilds, maintenance, or performance refresh Compatible With B6.1 B6.1D And other Team Associated models using the same gear differential design

Read more less

  Power. Precision. Performance. Upgrade your ESC with the Hobbywing Module-X Non-Polarity Capacitor Module — engineered to deliver faster throttle response, smoother acceleration, and reduced electrical noise for ultimate racing consistency. Perfect for 1/10-scale Modified or Stock setups, this high-efficiency capacitor pack enhances performance without adding unnecessary weight or bulk. Race-Grade EfficiencyThe Module-X features low impedance and high ripple current endurance, allowing it to absorb voltage spikes and minimize interference caused by rapid ESC switching. The result: improved startup acceleration, lower heat generation, and longer ESC lifespan. Compact and lightweight, it mounts easily on your chassis for a clean, professional installation. ⚡ Features: Greatly improves startup acceleration and throttle response Reduces interference from ESC power switching Low impedance design for higher efficiency Minimal heat generation under load Small, lightweight, and easy to install Designed for 1/10-scale racing applications 📏 Specifications: Size: Standard (1/10-scale) 📦 Includes: (1) Hobbywing Module-X Modified/Stock Non-Polarity Capacitor Module  

Read more less

Upgrade your suspension setup with the Factory Team 13mm Shock Collar and Seal Retainer Set from Team Associated. This black anodized aluminum set is designed to increase durability and offer a clean, high-performance look. 📦 Includes: (2) Black aluminum shock collars (2) Black aluminum seal retainers ⚙️ Key Features: CNC-machined 6061-T6 aluminum construction Black anodized for a sleek, factory appearance Increased strength over stock plastic parts Designed for precision fit and long-term durability Factory Team tuning part ✅ Compatibility:Fits Team Associated 13mm shocks, commonly used on: RC10B6.4 / B6.4D RC10B74.2 / B74.2D RC10T6.4 RC10SC6.4 And other vehicles equipped with Team Associated 13mm shocks 🏁 Ideal For:Racers looking to improve the consistency, look, and longevity of their suspension setup. Great for both carpet and dirt track performance.

Read more less

Gens Ace Redline 2.0 2S Shorty LiHV Battery (7.6V/6000mAh) – 140C Burst Race-Ready Power. Expanded Runtime. Shorty Format. Push your limits with the Gens Ace Redline 2.0 6000mAh LiHV Shorty — a premium high-discharge racing battery built for domination. Engineered with Silicon Graphene technology, this pack delivers stable voltage, a flatter discharge curve, and long-term cycle performance — all in a low-profile shorty size perfect for 1/10 scale competitive setups. ⚙️ Features: ⚡ 140C Continuous Discharge – massive power delivery for serious racers 🔋 7.6V LiHV / 6000mAh Capacity – extended runtime and high-voltage performance 🔌 5mm Bullet Connectors – high-amp, secure connectivity 🪶 Shorty LCG Design – optimized for low center of gravity setups 🔬 Factory-matched cells for superior balance and reliability 📐 Specifications: Voltage: 7.6V (2S LiHV) Capacity: 6000mAh Continuous Discharge: 140C Configuration: 2S2P Watt Hours: 45.6Wh Connector: 5mm Bullet Balance Plug: 2mm Bullet Dimensions: 96 x 47 x 25mm Weight: 220g (7.76oz) 🏁 For racers needing a perfect blend of raw power, extended runtime, and reliable heat management, the Gens Ace Redline 2.0 6000mAh Shorty delivers. Built for the podium.

Read more less

The Team Associated RC10SC7 Body Mounts Set is a direct replacement for worn or damaged body mounts on the RC10SC7 platform. Designed to restore proper body fitment and mounting height, this set keeps your short course body secure and aligned. Overview Genuine Team Associated replacement part Direct fit for RC10SC7 Durable molded construction Restores correct body mounting position Includes (1) Body Mounts Set Compatibility RC10SC7 Perfect for maintenance, repairs, or keeping a spare set in your pit box. 🏁  

Read more less

Dial in your car’s balance with precision—anywhere on the chassis.The ProTek RC Self Stick Chassis Weight Strips give racers a compact, customizable way to fine-tune weight bias, improve stability, and optimize handling on any track surface. About the Chassis Weights Each strip includes twelve 5g weights (24 total), backed with strong pre-applied adhesive.Their compact 20×9.4×4.4mm size makes them perfect for tight mounting locations—lay them flat, stack them, or tuck them into hard-to-reach spots to get your setup dialed exactly how you want. Great for: Balancing left/right weight Adding traction on slick tracks Fine-tuning front/rear bias Stabilizing high-powered builds Whether you're prepping for carpet, dirt, oval, or on-road, these weights give you total control over your setup. Features Compact 20×9.4×4.4mm design fits tight spaces Strong pre-applied sticky tape Perfect for fine-tuning chassis weight bias 120g total weight per package Stackable for precise tuning Includes (24) 5g Self-Stick Chassis Weights (12 per strip)

Read more less

Upgrade your RC10B6.3 front-end handling with these Factory Team Steering BlockArms. Featuring a +1mm height and made from lightweight carbon fiber, these HT (High Traction) arms are designed to optimize steering feel and response in high-grip conditions. A must-have for racers looking to fine-tune their setup for maximum performance. 🔥 Key Features: Genuine Team Associated Factory Team upgrade +1mm height for increased front roll center High traction (HT) geometry improves cornering in grippy conditions Constructed from precision-cut carbon fiber Lightweight and durable for competition use ✅ Compatibility: RC10B6.3 RC10B6.3D May fit other RC10B6-series vehicles with similar front-end geometry 📦 Includes: (1) Left Steering Block Arm (1) Right Steering Block Arm ⚠️ Note:Factory Team parts are intended for experienced builders and racers. Always check fitment before installation.

Read more less

Boost your buggy’s performance with this high-quality Factory Team Carbon Composite Laydown Gearbox and Chassis Braces set! Designed for racers looking to increase chassis rigidity and reduce unwanted flex, this upgrade delivers improved consistency, sharper handling, and enhanced tuning potential on high-grip surfaces. ✅ Key Features: Factory Team carbon composite construction for added durability and reduced flex Improves overall chassis response and driving precision Ideal for high-grip tracks where consistency is key Direct fit for RC10B6 platform—easy bolt-on performance upgrade 📦 Includes: (1) Laydown Gearbox (Carbon Composite) (2) Chassis Braces (Carbon Composite) 🔧 Compatibility: Team Associated RC10B6 Also compatible with RC10B6.1, B6.2, B6.3, and similar laydown setups Take your tuning to the next level with Factory Team precision—perfect for racers chasing every tenth!

Read more less

Team Losi Racing Upper Shock Bushing Set (4) – TLR5092 This is a genuine Team Losi Racing Upper Shock Bushing Set, designed for the TLR 22 1/10 buggy. These bushings provide a secure, smooth mounting point for your shock assembly and help reduce unwanted flex or wear during aggressive driving. ✅ Includes: 4 upper shock bushings✅ Fits: TLR 22 series✅ Genuine TLR performance parts Keep your suspension smooth and race-ready with factory-spec replacement bushings.

Read more less

1UP Racing Blue O-Ring Grease Lubricant (3g) – 1UP120301 Maximize performance and minimize friction with 1UP Racing Blue O-Ring Grease. This 3g container of high-performance lubricant is ideal for serious racers who demand smoother suspension and leak-free differentials. Designed to reduce sliding friction, it delivers ultra-smooth shock feel and long-lasting protection for diff o-rings and seals. Features: Smooths shock operation with reduced sliding friction Ideal for diff o-rings and seals to help prevent leaks Long-lasting formula for consistent performance Perfect for serious racers and RC enthusiasts Includes: (1) 3g Container of Blue O-Ring Grease  

Read more less

1up Racing LowPro 5mm Bullet Plugs – Ultra-Low Resistance, Pro-Level Finish ⚡ Dial in your wiring setup with 1up Racing LowPro 5mm Bullet Plugs — engineered for elite-level performance and clean installs. These compact, low-profile plugs feature an oversized 6-point contact for rock-solid connections and ultra-low resistance, maximizing efficiency and power delivery. 💡 Designed with a deep solder recess and only 15mm total length, these plugs are ideal for tight spaces and lightweight builds. Perfect for all LiPo batteries with 5mm inputs. ✨ Key Features: 🔩 LowPro Design – Just 15mm long for reduced weight and a cleaner install⚡ Oversized 6-Point Contact – Ensures secure fit and minimal resistance🔥 Easy-Solder Recess – Create strong, clean solder joints with 11–16 gauge wire📦 Universal Fit – Compatible with all LiPo packs using 5mm bullet connectors🛠️ Lightweight & Efficient – Built for performance and durability 📦 What’s in the Box? ✔️ (2) 1up Racing LowPro 5mm Bullet Plugs 💡 Upgrade Your Wiring Game – Get 1up Racing LowPro Bullet Plugs Today!

Read more less

  Keep your electronics running cool and consistent with the Reedy Blackbox 510R 30×30×10mm Fan. Designed for high-performance RC applications, this compact, high-airflow fan helps reduce heat buildup under demanding race conditions. Features & Benefits: Compact 30×30×10mm size fits most ESC and motor mounts High-efficiency cooling to maintain peak performance Durable construction for reliable race-day use Includes mounting screws for easy installation What’s Included: Reedy Blackbox 510R fan Mounting hardware A simple, effective upgrade to protect your electronics and keep lap times consistent.  

Read more less

Dial in your front-end feel with precision balance and smoother steering control. The R1WURKS B7 Series 10g Front Ball Stud Mount Weight is a simple drop-in upgrade that adds stability, traction, and predictability to the nose of your buggy—especially in conditions where the front end needs extra bite. Why Add Front-End Weight? Adding a small amount of mass to the front of your buggy can: Increase front-end traction Improve initial steering response Enhance mid-corner stability Reduce front-end bounce for smoother handling Help balance overall weight distribution when paired with battery placement adjustments Features High-quality brass construction Precision CNC machining Engraved for quick identification True drop-in fitment for the R1WURKS B7 ball stud mount Included (1) 10g Brass Weight (1) M2.5x8 Button Head Screw  

Read more less

Avid Slip Bearing Oil | High-Performance Teflon-Based Lubricant [AV10134] Product Overview: Slip into unmatched performance with Avid Slip Bearing Oil—now with a light blue tint! This ultra-premium Teflon-based oil is engineered to drastically reduce metal-on-metal friction, extend bearing life, and protect against rust and dirt. Put through rigorous third-party testing, Slip Bearing Oil has proven to outperform typical light oils with ease. The convenient oiler pen features a 1" steel precision tip, perfect for quick access to clutch or wheel bearings. Each pen contains 1/4oz (7.4cc) of high-efficiency lubricant—enough for over a year of racing use! Features: Teflon-based formula for extreme anti-friction performance Light blue tint for easy visual reference Reduces wear, repels dirt, and displaces moisture Ideal for clutch and wheel bearings Convenient oiler pen with 1" steel tip and protective cap 1/4oz (7.4cc) of oil lasts through countless applications Pro Tip:For clutch bearings, blow out factory grease before initial use. After each clutch inspection, wipe bearing clean and reapply 1 drop of Slip Bearing Oil for maximum life and performance. Includes:  • (1) Avid Slip Bearing Oil Pen

Read more less

Stronger. Stiffer. Smarter. Push your setup to the next level with the Factory Team Carbon V2 Caster & Steering Blocks Set, designed for the RC10T7 and RC10SC7 platforms. Crafted from Team Associated’s legendary carbon composite material, this high-performance upgrade delivers exceptional rigidity, reduced flex, and race-winning precision for serious competitors. Factory Team Engineering Developed by Team Associated’s Factory Team division, these Carbon V2 Caster & Steering Blocks are built for racers who demand consistent steering feel and maximum durability under pressure. The improved carbon design minimizes deflection for more accurate cornering response and improved high-speed stability, giving you total control lap after lap. Features: Constructed from AE carbon composite material for maximum strength and precision Increased rigidity reduces unwanted flex under load Enhanced durability for high-stress racing environments Improved handling consistency and cornering feedback Factory Team quality ensures perfect fit and race-ready reliability Includes: (1) Front Factory Team Carbon V2 Caster & Steering Blocks Set Compatibility: Team Associated RC10 SC7 Team Associated RC10 T7 Team Associated Factory Team — Engineered to Win.

Read more less

Keep your suspension dialed in with these M3x48mm steel turnbuckles from Team Associated. Designed for strength and precision, they’re a direct replacement for worn or bent camber or steering links on a variety of Team Associated vehicles. 🔥 Key Features: High-strength steel construction for durability M3 thread with a 48mm (1.89") length Ideal for use in suspension and steering linkages Precision-machined threads for secure fit and adjustability Standard AE turnbuckle design for easy setup ✅ Compatibility: RC10B6 / B6.1 / B6.2 / B6.3 series (various locations) SC6.1 / T6.1 / T6.2 May also fit other models requiring M3x48mm turnbuckles — check your manual for fitment 📦 Includes: (2) M3 x 48mm Turnbuckles (1.89") ⚠️ Note:For proper installation, use a 3mm turnbuckle wrench and thread into ballcups evenly to maintain symmetry and alignment.

Read more less

Team Associated Rear CVA Axle – 66mm (RC10B74) Restore or upgrade your B74 drivetrain. The ASC92207 66mm Rear CVA Axle is a precision-engineered replacement part designed specifically for the Team Associated RC10B74. Whether you're maintaining performance or rebuilding after wear, this axle ensures smooth power delivery and durability for competitive 1/10 4WD off-road racing. ⚙️ Features: 🛞 66mm length optimized for rear CVA driveshaft assemblies 🧰 Direct replacement for factory parts 💪 Hardened for strength and longevity under racing conditions 📦 Includes: (1) 66mm Rear CVA Axle ✅ Compatibility: Team Associated RC10 B74 Keep your B74 running smooth and race-ready with genuine Team Associated drivetrain components.

Read more less

Built for serious stock-class racers, the ProTek RC 2S 150C Stock Spec 4800mAh Shorty LiPo delivers explosive punch, ultra-low internal resistance, and consistent voltage from tone to tone. Featuring advanced Si-G cell technology and a low-profile LCG shorty design, this pack keeps your car balanced, planted, and fast all the way to the last lap. If you're chasing consistency and clean power delivery in 2WD or 4WD stock racing — this is the pack. ⚡ Stock-Class Performance You Can Trust With 150C discharge capability and extremely low internal resistance, this battery provides: Strong acceleration Stable voltage under load Lower operating temperatures Improved efficiency Extended cycle life The shorty LCG form factor helps optimize chassis balance and weight placement for modern race platforms. 🏁 Designed for Stock Racing This pack is engineered specifically for stock-class competition where smooth, consistent voltage is critical. The improved efficiency and reduced heat build-up keep performance predictable and reliable throughout your main. Features 4800mAh capacity 150C high-discharge rating Low IR Si-G cell technology LCG shorty hardcase design Lighter and thinner profile Strong runtime with aggressive punch 10C maximum charge rate (1C recommended for longest life) ROAR approved Includes (1) ProTek RC 2S 4800mAh Battery (2) 5mm Bullet Connectors Specifications Nominal Voltage: 7.4V (2S) Capacity: 4800mAh Max Charge Rate: 10C (40A) Peak Discharge: 150C Cell Configuration: 2S1P Watt Hours: 35.5Wh ROAR Approved: Yes Battery Connector: 5mm Bullet Balance Connector: 2mm Bullet Dimensions: 95.3 x 46.9 x 21.2mm Weight: 190g ⚠️ Important LiPo Safety Always balance charge Use a LiPo-specific charger Never leave charging batteries unattended Do not over-discharge (minimum 3.2V per cell) Use a LiPo safe charging bag Allow pack to cool before recharging Reliable voltage. Strong punch. Championship consistency. 🏆  

Read more less

The Team Associated RC10T7 and RC10SC7 Rear Suspension Arms are genuine replacement components designed to restore proper suspension performance and durability. Manufactured to factory specifications, these rear arms ensure correct geometry, strength, and consistent handling for your T7 or SC7 platform. Perfect for routine maintenance, race-day repairs, or keeping a spare set in your pit box. Features Genuine Team Associated replacement parts Factory-fit rear suspension arms Maintains proper suspension geometry Durable construction for racing conditions Includes (2) RC10T7 / RC10SC7 Rear Suspension Arms Compatibility Team Associated RC10 SC7 Team Associated RC10 T7 A dependable replacement set to keep your suspension tight, consistent, and race-ready. 🏁  

Read more less

The Team Associated Factory Team Carbon Front Suspension Arms for the RC10T7 and RC10SC7 are a high-performance upgrade designed to increase rigidity and improve suspension consistency under demanding racing conditions. Built using AE’s legendary carbon composite material, these arms reduce flex found in standard suspension components, resulting in more precise handling and predictable performance on the track. Engineered as part of the Factory Team lineup, these arms deliver race-proven strength and durability while maintaining perfect fit and compatibility with the RC10T7 and RC10SC7 platforms. Features Factory Team carbon composite construction Increased rigidity for improved suspension response Reduces flex compared to stock arms Enhances durability and strength Improves handling consistency during high-stress driving Direct-fit Factory Team upgrade Includes (2) Factory Team Carbon Front Suspension Arms Compatibility Team Associated RC10T7 Team Associated RC10SC7 A race-ready suspension upgrade designed for drivers looking for improved precision, durability, and consistency on the track. 🏁

Read more less

Fine-Tune Your Handling. Maximize Your Grip. Unlock next-level stability with the Team Associated RC10T7/RC10SC7 Rear Anti-Roll Sway Bar Set — the go-to tuning upgrade for racers who demand consistency, balance, and improved cornering on any surface. Whether you're on tight indoor carpet, loose dirt, or bumpy outdoor tracks, this sway bar set helps control chassis roll to keep your truck flatter, more predictable, and faster through every section. About the Sway Bar Set Precision Tuning Made Easy Designed specifically for the RC10T7 and RC10SC7 platforms, this rear sway bar set gives you multiple bar thicknesses to fine-tune how much the rear end stays planted.More resistance = more stability.Less resistance = more rotation.Choose the perfect feel for your track and driving style. A must-have item for racers looking to get the most out of the Team Associated 1/10 4x4 trucks. Features Three sway bar sizes for precise tuning Reduces chassis roll for improved consistency Increases cornering balance and steering predictability Works on tight, loose, and bumpy tracks Perfect for any racer’s tuning bag Direct fit for RC10SC7 and RC10T7 platforms Includes (1) Rear Sway Bar Set (multiple bar thicknesses)

Read more less

  Keep your battery secure and your buggy race-ready with the Team Associated B6 Battery Strap. Designed as a direct replacement part, this strap ensures a snug fit and reliable hold for your battery pack during the most demanding runs. ✅ Direct Replacement – Fits RC10 B6 and B6D buggies✅ Secure Fit – Keeps your battery firmly in place✅ Complete Package – Includes strap, nuts, and hardware Includes: (1) Battery Strap (2) Battery Strap Nuts (Hardware Set) Compatibility: Team Associated RC10 B6 Team Associated RC10 B6D

Read more less

🔥 Big Power. Small Footprint.The Team Exalt 110W Digital Soldering Iron packs serious heat in a travel-friendly design. With lightning-fast heat-up, digital precision, and a built-in safety shutoff, this is your go-to soldering tool whether you’re at the track or at the bench. ⚡ Features: 110W power output for rapid heat-up Digital display with °F/°C readout Auto safety shutoff & sleep timer Ceramic heater with platinum temp sensor Plug-and-play AC design—no base station needed Compact, portable, and ready to travel 💡 Built for RC racers, builders, and field techs who demand pro-level performance in a portable package.

Read more less

This is a Reedy Flat Sensor Wire. The flat sensor wires that are included with the Reedy Sonic motor are now available separately in a variety of lengths to suit 1/10 and 1/8 applications! The flat design looks great and provides an extremely clean look. Choose from between 70mm and 270mm lengths.

Read more less

Team Associated 13mm Rear Shock Spring (Grey/2.55lbs) (72mm) [71165] 🛞 Smoother landings. Better cornering. Upgrade your suspension game with these 13mm Rear Shock Springs from Team Associated. Designed for the T6.2 and SC6.2 when equipped with 13mm shocks, these springs deliver a plush low-speed response while still offering the support you need for big jump landings. It’s the best of both worlds—smooth over the bumps, firm on the hits. 🔥 Features:✅ Grey rate: 2.55 lbs/in✅ Length: 72mm✅ Optimized for 13mm shocks✅ Delivers soft feel with firm pack✅ Includes 2 springs 📦 Part Number: 71165🏁 Brand: Team Associated

Read more less

1up Racing Pro Duty Equipment Case – Built for the Track, Ready for Anything 🔧 Protect your gear like a pro with the 1up Racing Pro Duty Equipment Case – the ultimate storage solution for racers who value durability, organization, and style. Whether you're hauling tools, electronics, or spare parts, this case is engineered to keep your essentials safe and scratch-free. 💼 Featuring a rigid outer shell, dense internal padding, and six customizable dividers, this case adapts to your setup with ease. Impact-absorbing foam on the top and bottom adds next-level protection, while the internal compartments and zippered pouch keep everything neat and accessible. ✨ Key Features: 🛡️ Heavy-Duty Shell with Dense Padding – Keeps your tools, chargers, and electronics safe📦 Adjustable Dividers – 6 foam inserts for a fully customizable interior layout🧵 Durable Black Fabric Interior – Clean, professional finish inside and out🧰 4 Tool Pouches + Zippered Pocket – Store scissors, pliers, leads, setup sheets, and more🧩 Impact-Absorbing Foam (Top & Bottom) – Superior protection during transport 📏 Dimensions: Interior Space: 23 x 20 x 7.5cm\ Dividers Included:✔️ (1) 23cm Divider✔️ (2) 12.5cm Dividers✔️ (3) 6.5cm Dividers 🎯 Built to Travel. Designed to Organize. Whether you're trackside or organizing your pit area at home, the 1up Racing Pro Duty Equipment Case keeps your essentials secure, accessible, and race-ready. 💡 Organize Like a Pro – Grab Your 1up Equipment Case Today!

Read more less

Team Exalt Shorty LiPo Battery Storage Case (LCG)PART #: EXA4053 Keep your race-day power organized, protected, and ready to roll with the Team Exalt Shorty LiPo Battery Storage Case. Designed to hold up to five LCG shorty LiPo batteries, this lightweight, 3D-printed case is the perfect addition to any pit setup. Built from high-quality PLA, this compact and durable box keeps your batteries secure during storage and transport—without taking up unnecessary space. Whether you're heading to a local club race or a national event, this case helps you stay race-ready and clutter-free. Features: Holds five LCG shorty LiPo batteries 3D printed from durable PLA material Compact and lightweight—ideal for transport Precision-sized battery slots keep packs secure Easy to fit into your tool bag or pit box Includes: (1) Shorty LiPo Battery Storage Case (holds 5 batteries) Specifications: Material: PLA Outer Dimensions: 6.5 x 5 x 2 in (165.1 x 127 x 50.8 mm) Slot Dimensions: 3.8 x 1 x 1.6 in (96.5 x 25.4 x 40.6 mm) Note: This case is for storage and transport only. Not designed for charging or fire-safe containment.

Read more less

Team Associated FT 3x27.5mm V2 Chrome Shock Shafts – ASC91620 Smooth, Durable, Factory-Grade Suspension Parts Upgrade or replace your V2 shocks with the Factory Team 3x27.5mm Chrome Shock Shafts, engineered for exceptional performance and longevity. Designed specifically for #91577 buggy rear and #91578 truck front shock bodies, these shafts provide a precise fit with a low-friction chrome finish. ⚙️ Features: ✅ Chrome-coated for reduced stiction and increased durability ✅ Designed for secure screw-mounted piston setup ✅ Factory Team precision for consistent shock action ✅ Ideal for competitive racing environments 📦 Includes: (2) 3x27.5mm V2 Chrome Shock Shafts ✅ Compatibility: #91577 – Buggy Rear Shock Bodies #91578 – Truck Front Shock Bodies Not compatible with E-clip piston systems 🏁 Factory Team quality that keeps your ride smooth and race-ready!

Read more less

Keep your drivetrain spinning at peak efficiency with R1WURKS DOPE Double Ceramic High Speed Bearing Lube. Designed specifically for RC racing applications, this premium lubricant provides smooth, high-speed bearing performance while minimizing friction and resistance. With its low-viscosity formula, this oil delivers excellent lubrication while helping flush dirt and contaminants from bearings, keeping them clean and operating smoothly. ⚡ Built for High-Speed Racing This high-speed formulation provides the perfect balance of lubrication and efficiency. The low viscosity reduces drag inside the bearing, allowing for maximum RPM and minimal friction, giving racers the performance advantage they need on the track. 🔧 Cleans While It Lubricates Unlike heavier oils that can slow bearings down, this formula helps flush contaminants out of the bearing while maintaining proper lubrication. This keeps bearings running cleaner and extending their service life. 🏁 Consistent Long-Term Performance By providing just the right amount of lubrication, DOPE High Speed Bearing Lube protects bearings from wear while maintaining the free-spinning performance required for competitive racing. ⚙️ Features Double ceramic bearing lubricant Specially formulated for RC racing applications Low-viscosity formula for maximum speed Reduces friction and drivetrain resistance Helps flush dirt and contaminants from bearings Maintains smooth bearing operation Provides long-lasting protection against wear 📦 Includes (1) 10ml Bottle of R1WURKS DOPE Double Ceramic High Speed Bearing Lube An excellent maintenance product for racers looking to maximize bearing speed, reduce friction, and maintain peak drivetrain performance.  

Read more less

Keep your drivetrain running smooth and protected with R1WURKS Black WS2 Grease. Specially formulated for high-performance RC applications, this grease is ideal for universal joints, dogbones, drive cups, and other high-load drivetrain components where reduced friction and long-lasting lubrication are critical. Infused with WS2 (Tungsten Disulfide) particles, this grease provides exceptional lubrication under extreme pressure while maintaining smooth performance even at elevated temperatures. ⚙️ High-Performance Drivetrain Lubrication The WS2 formula offers an extremely low coefficient of friction, helping drivetrain components operate more efficiently while reducing wear. With an impressive 300,000 PSI load-bearing capacity, it is designed to handle the heavy loads and impacts commonly experienced in RC racing and bashing. 🔧 Built for Extreme Conditions R1WURKS Black WS2 Grease is engineered to remain stable even in harsh environments. Its high dropping point allows it to stay fluid at high temperatures, preventing the grease from breaking down or solidifying during demanding runs. It also provides strong resistance against water, rust, and humidity, helping protect components from corrosion and long-term wear. ⚡ Features Designed for RC drivetrain components Ideal for dogbones, drive cups, and universal joints WS2 (Tungsten Disulfide) lubrication technology Extremely low coefficient of friction 300,000 PSI load-bearing capacity Excellent resistance to water, rust, and humidity High-temperature stability Resists abrasion and extreme pressure 📦 Includes (1) 3g Tube of R1WURKS Black WS2 Grease A must-have maintenance product for racers and builders looking to reduce drivetrain friction, protect components, and maintain peak performance.  

Read more less

The Team Associated Factory Team 8.5mm Aluminum Clamping Wheel Hexes are an optional upgrade designed to provide a secure, slip-resistant wheel mounting solution. Featuring a clamping design, these hexes help prevent wheel wobble and maintain consistent wheel alignment under high-load racing conditions. Machined from durable aluminum, they offer lightweight strength while improving reliability over standard hex designs. Ideal for racers looking for a more secure and precise wheel fit. Features Factory Team optional upgrade 8.5mm clamping wheel hex design CNC-machined aluminum construction Helps reduce wheel slop and movement Improves wheel mounting security Lightweight and durable Includes (2) 8.5mm Aluminum Clamping Wheel Hexes (2) Axle Pins (2) Hex Screws A race-ready wheel mounting upgrade built for strength, precision, and consistent performance. 🏁  

Read more less

Commemorate Team Losi Racing’s IFMAR World Championship with the official TLR World Champion Trucker Hat. Built on the iconic Richardson 112 platform, this cap combines premium comfort, durability, and classic trucker styling that has made it one of the most popular hats in the USA. Known for its quality construction and timeless fit, the Richardson 112 features a structured front panel and breathable mesh back, making it perfect for race days, shop time, or everyday wear. With championship-inspired TLR branding, this hat lets you represent winning heritage wherever you go. Features Official TLR World Championship commemorative design Richardson 112 premium trucker cap Structured front with breathable mesh back Classic mid-profile fit Adjustable snapback closure Durable, high-quality construction A clean, race-inspired look that celebrates TLR’s championship legacy while delivering everyday comfort and style. 🏁  

Read more less