1up Racing Pure Silicone Diff Oil – Precision Tuned, Race Proven  Dial in your drivetrain with 1up Racing Pure Silicone Diff Oil, available in an incredible 34 viscosities from 1K to 4,000,000 cSt. Whether you're hitting a loose off-road layout or chasing tenths on-road, this elite-grade diff oil gives you the precision control and long-lasting performance to match any condition. 🏁 Expertly formulated in Europe using 100% pure silicone—no fillers, no shortcuts—just ultra-consistent fluid that resists breakdown and stays stable run after run. ✨ Key Features: 🔧 1K to 4M cSt Range – Fine-tune your setup with one of the widest diff oil selections available🔬 100% Pure Silicone – No additives or thickeners; consistent performance every time🇪🇺 European-Made – Manufactured to exacting standards for elite RC performance📏 Easy-ID Flip Cap – Large printed cSt rating on lid and front label🧼 Stable Viscosity – Maintains tuning integrity under extreme temps and use 📦 Bottle Size: 60ml each (2oz)🛍️ Mix & Match – Build Your Perfect Tuning Kit! 💼 Don’t forget to pair your diff oils with the 1up Racing Shock & Diff Oil Carrier Bag – keeps 12 bottles clean, upright, and ready for race day. 🧠 Tuned to Win – Trust 1up Diff Oils to Deliver Every Lap

Read more less

1up Racing Pure Silicone Shock Oil – Smooth, Stable, Track-Ready 💧 Achieve the perfect suspension feel with 1up Racing Pure Silicone Shock Oil, crafted for racers who demand precision, consistency, and elite-level control. Offered in 24 viscosities from 200 to 950 cSt, this oil is your go-to for fine-tuning performance in any terrain or temperature. 🏁 Formulated and produced in Europe using 100% pure silicone, 1up’s shock oil stays consistent lap after lap—no fillers, no fade, just ultra-smooth damping for maximum grip and control. ✨ Key Features: 🔧 24 Viscosity Options (200–950 cSt) – Dial in your setup with unmatched precision🔬 100% Pure Silicone – Zero additives, maximum consistency and smoothness🇪🇺 European-Made Quality – High-performance oil manufactured to top-tier standards📏 Easy-ID Flip Cap – Large printed viscosity rating on lid and label for quick access🔥 Stable Under Pressure – Maintains damping feel in hot or cold conditions 📦 Bottle Size: 60ml each (2oz)🛍️ Build Your Complete Suspension Tuning Kit! 💼 Pair with the 1up Racing Shock & Diff Oil Carrier Bag – fits 12 bottles perfectly and keeps your pit organized. 🧠 Suspension That Stays Dialed – Choose 1up for Smooth Control Every Lap 💼 Don’t forget to pair your diff oils with the 1up Racing Shock & Diff Oil Carrier Bag – keeps 12 bottles clean, upright, and ready for race day. 🧠 Tuned to Win – Trust 1up Diff Oils to Deliver Every Lap

Read more less

  Team Associated Factory Team 15.5mm Aluminum 25 Tooth Servo Horn. This is an optional servo horn designed for the RC10 B6 and B6D 1/10 buggies. 25T fits Futaba, ProTek, Savox and most other 25T servos. COMPATIBILITY: Team Associated RC10 B6 Team Associated RC10 B6.1 Team Associated RC10 B6.1 Factory Lite Team Associated RC10 B6.1D Team Associated RC10 B6.2 Team Associated RC10 B6.2D Team Associated RC10 B6D Team Associated RC10 SC6.1

Read more less

JConcepts Swaggers Carpet Short Course Front Tires (2) (Pink) 🏁Maximize your short course racing performance with the JConcepts Swaggers Carpet Short Course Front Tires! Designed for aggressive cornering and straight-line stability, the Swaggers are built to deliver ultra-fast lap times while providing the predictability and ease of driving that other tires can’t match. Whether you're hitting the carpet or astroturf, these tires will give you the edge you need on high-grip surfaces. 🔹 Key Features:✅ Aggressive Design – Multiple height, angular ribs provide ultimate cornering speed and consistent straight-line tracking.✅ Ultra-Low Profile – Keeps your truck predictable and consistent in high-grip conditions for precise handling.✅ High-Grip Performance – Optimized for carpet and astroturf tracks, ideal for aggressive front tire needs.✅ Pink Compound – Medium-soft material with excellent wear characteristics, marked with 2 pink dots for identification.✅ Open Cell Inserts – Included for superior performance and responsiveness in varying track conditions.✅ JConcepts Fit & Finish – Premium quality, designed to give you the best on-track performance. 📊 Specifications: Tire Type: Short Course Front Compound: Pink (Medium-soft) Carcass: Low-profile for increased response Rib Design: Offset, multiple height, angular ribs for cornering speed Fitment: SCT wheels (JCO3344 – AE; JCO3352 – TLR) Inserts: Open cell inserts included 📦 In The Box:✔️ (2) JConcepts Swaggers Carpet Short Course Front Tires (Pink)✔️ (2) Open Cell Inserts 🌟 Unlock Your Full Potential!Get the performance you need with JConcepts Swaggers Carpet Short Course Front Tires. Designed for carpet and astroturf tracks, these tires offer aggressive cornering, predictable handling, and fast lap times. Built with a low-profile carcass and the new pink compound, they’re your perfect companion for serious short course racing.

Read more less

Team Associated 7.0mm Factory Team Aluminum Clamping Wheel Hex (2) Durable Upgrade for Precision Fit & Adjustable Offset Upgrade your RC10 with the precision and strength of the Team Associated 7.0mm Factory Team Aluminum Clamping Wheel Hex Set. CNC-machined and anodized for performance and style, these aluminum hexes offer a secure clamping design and are a great tuning option for adjusting track width and wheel fit. 🔧 Features: 🛠️ CNC-Machined Aluminum Construction – Lightweight, strong, and anodized for durability 🔒 Clamping Design – Secure fit with cap head screws prevents slipping during hard runs 🔁 Tuning Flexibility – Adjusts rear offset when used with compatible models 📦 Includes: (2) 7.0mm Clamping Hexes (2) Cross Pins (2) Cap Head Screws ⚙️ Compatibility Notes: ✅ Direct Fit For: RC10 B5M Factory Lite ✅ Optional Use On: T5M (stock offset), B5/B5M (adds offset) ⚠️ Requires: Team Associated HD Rear CVA Axle (ASC71019) 💡 Ideal for racers looking to fine-tune rear track width or reinforce wheel mounting with a reliable aluminum upgrade.

Read more less

Factory Team Silicone Shock Fluid – 2oz (10wt–80wt)Dial in your suspension like a pro with Factory Team Silicone Shock Fluid! 🛠️ Made from 100% pure silicone, this oil maintains consistent performance in any temperature — no thinning in the heat, no thickening in the cold. Whether you're tuning for smooth landings or sharp handling, there's a perfect weight from 10wt to 80wt to match your setup. ✅ Great for: Oil-filled shocks on 1/10 & 1/8 scale vehicles Consistent performance across all temps Precision tuning from ultra-light to ultra-thick damping 🧪 Choose your weight using the dropdown menu.📦 2oz bottle – available in 10wt, 15wt, 20wt... up to 80wt Note: Team Associated shock oil runs slightly thinner than comparable Team Losi oils with the same labeled weight.  

Read more less

Team Associated SC6.1 Body Mount Set – Part 71123Secure Fit. Factory Fresh. The Team Associated SC6.1 Body Mount Set (71123) is a complete replacement front and rear body mount kit for your SC6.1 short course truck. Whether you're rebuilding after a crash or refreshing your body mounting system, this kit provides everything needed for a secure and adjustable fit. ✅ Fits Team Associated SC6.1 short course trucks✅ Includes front and rear body mount braces✅ Adjustable body posts for custom body height✅ All necessary hardware included✅ OEM replacement for easy installation 📦 Includes: (1) Front Body Mount Brace (1) Rear Body Mount Brace (Body Posts + Mounting Hardware) Part #: 71123 💡 Pro Tip: For added body security, pair with reinforced body washers or foam pads to reduce post wear.  

Read more less

Team Associated Caster Hat Bushings: B6 [91676]🎯 Fine-Tune Your Front End!Dial in your perfect front-end geometry with the Team Associated B6 Caster Hat Bushings. Designed for the RC10 B6 and B6D, this set lets you adjust caster angle precisely, helping you gain the perfect balance of steering and stability for any track condition. 🔧 Features:✅ Direct replacement for stock bushings✅ Includes 0mm, 1mm, 2mm, and 3mm for custom tuning✅ Two of each size for left and right sides✅ Made for the RC10 B6 and B6D platforms 📦 Includes:(2) 0mm Bushings(2) 1mm Bushings(2) 2mm Bushings(2) 3mm Bushings 🔥 Part Number: 91676

Read more less

Bring the heat to the track with the JConcepts Hazard wheels! Designed for SC10 4x4 and SC10 2WD trucks (with 12mm hex conversion), these wheels widen your stance by 6mm for maximum stability and cornering performance. Perfect for high-speed dirt oval or off-road racing, the Hazard wheels are lightweight, durable, and race-legal to the max ROAR width. Features:• Adds 3mm offset per side for a total of 6mm extra width• Designed for SC10 4x4 and SC10 2WD w/ 12mm hex conversion• Durable 1-piece design with interior/exterior ribbing• Matte-finish face in Black (3344B), White (3344W), or Yellow (3344Y)• Inspired by full-scale racing wheels• Lightweight and hassle-free for race day

Read more less

Team Associated Factory Team Low Friction X-Rings (8) [91493]🧪 Smoother Shocks. Better Performance.Upgrade your suspension with Team Associated Factory Team Low Friction X-Rings! Designed to reduce stiction and improve sealing, these high-performance shock seals help deliver ultra-smooth shock action and increased durability. 🔧 Features:✅ Low friction design for enhanced suspension response✅ Superior sealing to keep oil in and grit out✅ Perfect for racers demanding consistency and control✅ Genuine Team Associated Factory Team parts 📦 Includes:(8) Low Friction X-Rings 🔥 Part Number: 91493

Read more less

Add front-end strength and forward weight bias with this 10g Factory Team aluminum bulkhead for the RC10B6 series. Machined from high-quality aluminum and anodized for durability, it’s the perfect upgrade for racers seeking improved handling on high-traction tracks. 🔥 Key Features: CNC-machined aluminum construction for added strength Weighs 10 grams to shift weight forward for better cornering Factory Team part for pro-level durability and performance Hard-anodized finish resists wear and corrosion Direct fit replacement for the stock plastic bulkhead ✅ Compatibility: RC10B6 / B6.1 / B6.2 / B6.3 RC10B6D / B6.1D / B6.2D / B6.3D May also fit SC6 and T6 series vehicles with shared front-end geometry 📦 Includes: (1) 10g Aluminum Front Bulkhead ⚠️ Tip:Consider pairing with additional brass or aluminum weight tuning components for a fully balanced setup.

Read more less

Team Associated B6 Bumper Set (91685)Keep your RC10 B6 or B6D protected with this genuine Team Associated replacement bumper set. Whether you're replacing worn parts or upgrading your buggy's durability, this set has you covered with both front and rear bumpers included. Includes: (1) Front Bumper (1) Rear Bumper Compatibility: Team Associated RC10 B6 Team Associated RC10 B6D

Read more less

Team Associated 6mm Heavy Duty Ballstud Set (8) – Part 91047Stronger Threads. Smoother Movement. Built for Racing. The Team Associated 6mm Heavy Duty Ballstud Set (91047) is a direct replacement for worn or damaged ballstuds on vehicles like the SC10 4x4, B5, and B5M. Designed for high-strength performance under stress, these ballstuds offer secure fitment and smooth suspension articulation. ✅ Set of 8 heavy-duty 6mm ballstuds✅ OEM fit for SC10 4x4, B5, B5M, and other compatible platforms✅ Heavy-duty steel construction – improved durability in high-load areas✅ Precision fit for smooth ball cup movement✅ Ideal for camber links, steering systems, and shock mounts 📦 Includes: (8) 6mm Heavy Duty Ballstuds Part #: 91047 💡 Pro Tip: Pair with fresh ball cups for smooth, slop-free suspension movement and tighter handling.

Read more less

Lock in your tires with the strongest, fastest-drying RC tire glue on the market. Pro-Line Pro-Bond CA Tire Glue delivers a 3,200 PSI bond strength, giving racers absolute confidence that tires stay glued lap after lap — no lifting, no peeling, no failures. This premium formula dries crystal clear, with zero yellowing or whitening, and uses a revolutionary bottle + tip design that makes application easier, cleaner, and more consistent than any other glue you’ve used. If you mount tires, this is the glue. Features 3,200 PSI holding strength — highest in its class Super-fast curing with crystal-clear finish Custom CA formula delivers maximum rubber bond Ultra-soft round bottle for perfect squeeze control Round design stays stable on the pit table Reusable translucent yellow applicator tips Perfect applicator hole size for tire gluing Cleaner, easier, more consistent than standard CA bottles Includes (1) Pro-Line Pro-Bond Tire Glue (0.7oz / 20g) (2) Reusable Yellow Pro-Bond Applicator Tips

Read more less

Factory Team Aluminum Servo Horn – 25T / 18.5mm – Part 1363Stronger Steering. Smoother Control. The Factory Team 25T Aluminum Servo Horn (1363) is a premium upgrade for RC8B3, RC8B3e, RC8T3, and RC8T3e platforms. Machined from 7075 T6 aluminum, this horn is built to handle the demands of competitive racing. Its shorter 18.5mm length offers a smoother steering feel while reducing stress on the servo. ✅ 7075 T6 aluminum construction – lightweight and ultra-strong✅ 18.5mm length – optimized for smoother steering and less servo strain✅ Clamping design with large M2.5 screw – secure fit with reduced slop✅ Laser-etched 25T spline size – easy identification✅ Compatible with XP Digital, Reedy, Futaba, Savox, and newer Hitec servos✅ Perfect fit for RC8B3, B3e, T3, and T3e platforms 📦 Includes: (1) 25T Aluminum Clamping Servo Horn (18.5mm) (1) M2.5 Clamp Screw Part #: 1363 💡 Pro Tip: Shorter servo horns like this one help protect your servo during high-impact landings and tight cornering.

Read more less

Keep your suspension performing at its best with the Team Associated 13mm Shock Rebuild Kit. Designed specifically for the B6.4 and B6.4D, this kit includes the essential O-rings and plastic bushings needed to refresh four shocks, restoring smooth, consistent performance on the track. Whether you're doing preventative maintenance or reacting to wear, this factory replacement kit ensures a proper fit and reliable sealing for optimal shock operation. 🛠️ Features Genuine Team Associated replacement parts Restores smooth and consistent shock performance Designed for 13mm shocks Fits Team Associated B6.4 / B6.4D platforms Enough components to service four shocks 📦 Includes O-rings (for four shocks) Plastic bushings (for four shocks) 🔧 Compatibility Team Associated B6.4 Team Associated B6.4D

Read more less

Refined torque. Tuned traction. Proven performance.The Team Associated RC10B7 3-Gear Gearbox Conversion Kit delivers a race-focused drivetrain upgrade that lets you fine-tune your buggy’s handling and power delivery. Designed for the RC10B7 and RC10B7D, and also compatible with T7 and SC7 platforms, this 3-gear layout alters torque transfer for a smoother, more balanced launch and enhanced rear-end stability. Perfect for racers chasing the edge on high-traction surfaces or looking to dial in rotation on tight tracks, the 3-gear conversion gives you the flexibility to tailor your drivetrain to your driving style. ⚙️ Features Performance-oriented 3-gear gearbox design Optimized torque response for improved traction and balance Includes notched differential height inserts for precise tuning Durable 54T idler gear with hardened idler shaft Factory-fit bearings and hardware for smooth installation CNC-machined aluminum arm mount (C) included Comprehensive kit with all mounting hardware and manual Designed for consistent durability and easy maintenance 📦 Includes (2) 3-Gear Gearbox Halves (4) Notched Differential Height Inserts (1) 54T Idler Gear (1) Idler Shaft (2) 10×15×4 mm Bearings (1) Aluminum Arm Mount (C) Full Hardware Set 3-Gear Conversion Manual ✅ Compatibility Team Associated RC10B7 / RC10B7D Team Associated T7 / SC7  

Read more less

  📡 Compact, Reliable, and Built for Electric RC PrecisionThe Futaba R304SB-E is a 4-channel, telemetry-capable receiver designed specifically for electric-powered RC vehicles. Featuring Futaba’s T-FHSS protocol, this receiver provides lightning-fast response, high signal stability, and full telemetry capability in a compact and efficient package. Unlike its sibling (the R304SB), the R304SB-E features a built-in internal antenna, providing a sleek, snag-free design ideal for tight chassis layouts and high-performance on-road or off-road builds. ⚙️ About the R304SB-E Perfectly matched for Futaba’s T-FHSS transmitters (such as the 4PM, 4PM+, and 7PXR), the R304SB-E delivers reliable control and telemetry feedback while maintaining a compact footprint. It’s optimized for electric vehicle (EP) applications, ensuring clear, interference-free operation under racing conditions — without the signal noise that can occur in gas or nitro setups. This receiver supports S.Bus2 connectivity, allowing advanced telemetry sensors to plug directly into the system, giving drivers access to live voltage, temperature, RPM, and more (depending on transmitter support). 🌟 Features T-FHSS Telemetry System – Real-time telemetry feedback 4-Channel Output – Ideal for most 1/10 and 1/8 electric vehicles S.Bus2 Compatible – Connect telemetry sensors directly Built-in Internal Antenna – Clean look, no exposed wire High-Speed Signal Transmission – Fast response for competitive driving Electric Models Only – Designed specifically for EP applications Compact & Lightweight Design – Perfect for tight chassis layouts 📊 Specifications Specification Detail Futaba System T-FHSS Channels 4 Telemetry Yes (T-FHSS only) S.Bus2 Ports 1 Range 70m (230ft) under optimal conditions Rated Voltage 4.8–7.4V Usable Voltage 3.5–8.4V Dimensions 35.1 × 23.2 × 12.5mm Weight 6.7g Connector Type J (Standard) Recommended Use Electric Powered Vehicles Only ⚠️ Important Notes ⚡ Electric Only: Not suitable for nitro or gas-powered models. 🚫 Compatibility: Works only with Futaba T-FHSS transmitters.(Not compatible with FHSS, S-FHSS, FASST, or FASSTest systems.) 📦 Includes (1) Futaba R304SB-E 4-Channel Receiver 🏁 Compact, telemetry-ready, and purpose-built for electric racing — the Futaba R304SB-E delivers precision and performance trusted by serious RC enthusiasts.

Read more less

Direct-fit replacement for a range of B6-series buggies — essential for clean body and wing attachment. Upgrade or replace your worn mount with this OEM composite Wing/Body Mount for the RC10 B6 chassis line. The kit includes everything needed to properly secure both wing and body to your buggy. Includes: (1) Left Wing Brace (1) Right Wing Brace (1) Shim Plate (2) Wing Mount Buttons Key Features: Precision-molded composite for durability and reliable attachment Factory-style fit for consistent mounting and race-ready stiffness Optionally compatible with Team Associated Factory Team Aluminum Wing Mount (ASC91903) for racer upgrades Compatibility – What Fits Buggy Series Specific Models B6 Series RC10 B6, B6 Club Racer, B6D B6.1 Series B6.1, B6.1 Factory Lite, B6.1D, B6.1DL B6.2 Series B6.2, B6.2D B6.3 Series B6.3, B6.3D B6.4 Series B6.4, B6.4D Extended Chassis RC10 B64, B64 Club Racer, B64D T6 Variants RC10 T6.1, T6.2 SC6 Models SC6.1 Why It’s a Must-Have: Prevents body and wing movement during hard cornering or crashes Convenient replacement when original part wears or cracks Compatible across multiple mod cycles of the B6 platform — simplifies spare inventory!

Read more less

  Dial in your drivetrain with Team Associated’s 48 Pitch Brushless Spur Gears. Designed for smooth power transfer and durability under brushless systems, these precision-molded gears give you the tuning options you need for different track conditions. Features: High-strength composite construction 48 pitch, optimized for brushless motors Available in multiple tooth counts for gearing flexibility Perfect balance of durability and efficiency Available Sizes (each sold separately): 69T (Part #9648) 72T (Part #9649) 75T (Part #9650) Compatibility: RC10B6 / B6D RC10B6.1 / B6.1D RC10B6.2 / B6.2D RC10B6.3 / B6.3D RC10B6.4 / B6.4D And other Team Associated 1/10 buggies using 48P gears

Read more less

📏 Fine-Tune Your Gear Ratio for Maximum 17.5 Power!The TLR 48 Pitch Direct Drive Spur Gears are precision-engineered for the TLR Direct Drive System (TLR332043), giving you ultimate control over your gearing setup. Whether you need more top-end speed or quicker acceleration, choose from 69T, 72T, or 75T options to match your track conditions and dial in your 17.5 stock setup like a pro. 🔧 Features: Designed specifically for the TLR Direct Drive System (TLR332043) Available in multiple tooth counts for perfect gearing: 69T, 72T, or 75T Precision-molded for smooth, quiet operation Ideal for 17.5 stock class racing 🏁 Optimize. Adapt. Win.These spurs help extract every ounce of performance when you're chasing podiums. Don't just race—race smart with the right spur gear. ✅ Note:The 69T and 75T spurs are included with TLR332043 but are also sold individually here for replacements or spares.

Read more less

Upgrade your hardware with these Team Associated M4 Low Profile Serrated Steel Wheel Nuts. Designed for a secure grip, the built-in serrations bite into the wheel surface to prevent loosening during high-impact runs or long race days. ✅ Features:• Low-profile design for improved clearance• Serrated face for extra locking power• Strong steel construction for durability• Standard M4 thread size 📦 Includes:• (10) M4 Serrated Steel Wheel Nuts🔧 Part Number: 91150💡 Ideal for 1/10 scale RC vehicles requiring M4 hardware.

Read more less

Product Overview The Avid Ringer Wing Buttons are designed to have that extra pop of two silver highlights without sacrificing durability. Details 7075-T6 Aluminum anodized with two silver highlight areas for that extra pop. M3 flat head screw design to fit nearly every 8th and 10th vehicle on the market. Available colors: Black, Blue, Red, Pink, Orange, and Silver. Each package includes 2 Wing Mount Buttons.

Read more less

Give your 1/10 off-road buggy maximum rotation, rear tire clearance, and pro-level stability with the JConcepts 7" High Clearance Pre-Cut Wing. Designed for carpet, turf, and dirt setups, this wing arrives pre-trimmed and ready to mount—no scissors, no hassle. Engineered with optimized rake, height, and side-dam shaping, the 0504 wing helps your buggy stay planted on power while freeing up rotation in tight corners. Its universal fit works with most 1/10 2WD and 4WD buggies, making it a must-have tuning item for modern high-grip and high-speed tracks. ⭐ Features Pre-cut design — mount it right out of the package 7" wide High Clearance profile for improved rotation and tire room Short-chord design for quicker steering response Flat-base layout for maximum rear tire expansion clearance Chopped rear corners reduce breakage and increase durability Dual stability fangs for added rigidity and consistent aero feel High rear angle provides excellent high-speed stability ROAR National Champion–proven design Works on most modern 1/10 buggies (2WD & 4WD)

Read more less

Upgrade your drivetrain with Team Associated Factory Team Bearings — precision 10x15x4mm bearings designed to reduce friction, smooth out rotation, and improve overall performance. Featuring the signature blue shield for easy identification, these premium bearings deliver tighter tolerances and longer-lasting durability compared to stock components. Perfect for restoring worn-out bearing sets or boosting efficiency in your B5M, Apex, Prolite 4x4, ProRally, MGT 3.0, and many more platforms using 10x15x4mm bearings. Features: Premium Factory Team–grade precision bearings Blue-shielded on one side for quick identification Reduces friction and slop for smoother drivetrain operation Ideal upgrade or replacement for worn bearings Compatible with multiple Team Associated platforms Includes: (4) 10x15x4mm Factory Team Bearings

Read more less

Reedy B5 Flat Sensor Wire (125mm) – ASC96994Keep your electronics dialed and your wiring clean with the Reedy Flat Sensor Wire designed specifically for B5 series vehicles. At 125mm, it's a perfect fit for tight, compact setups where shorter wire runs are essential. The flat profile offers a streamlined look and hassle-free routing—ideal for racers looking to keep things tidy under the body. ✅ Designed for: RC10B5 / RC10B5M Fits most 1/10 ESC/motor setups 📏 Length: 125mm🧰 Flat wire for better cable management🔌 ROAR-legal sensor connection OEM Part #: ASC96994  

Read more less

Team Associated SC6.1 Front Bumper & Nerf Bars [71124] 🛡️ Toughen up your short course rig! This Team Associated SC6.1 Front Bumper & Nerf Bars set is the direct replacement for your SC6.1. Whether you're rebuilding after a bash or just want fresh hardware, this kit has what you need to keep your truck protected and track-ready. ✅ Durable factory replacement parts✅ Designed for precise fit on the SC6.1✅ Adds rugged front-end protection and side impact resistance Includes:(1) Front Bumper(1) Bumper Brace(2) Nerf Bars 📦 Part Number: 71124🏁 Brand: Team Associated

Read more less

Team Exalt X-tra Light-Speed Machined Delrin 48P Spur GearPART #: EXA4866 – EXA4874Available in 66T–74T (1-Tooth Increments) Team Exalt delivers again with their X-tra Light-Speed Spur Gears, precision-machined from ultra-durable Delrin for maximum performance and minimal weight. These 48-pitch gears are crafted to exacting tolerances for racers who demand consistency, smoothness, and every edge in competition. Now available in tooth counts from 66T to 74T, each gear allows you to fine-tune your gearing with confidence. Designed to handle high horsepower and aggressive setups, these lightweight spurs are the perfect match for Exalt’s elite motors and battery systems. Features: CNC-Machined Delrin for ultimate strength and precision Ultra-lightweight design: only 2.8g–3.6g 48 Pitch gearing for smooth power delivery Offered in 1-tooth increments from 66T to 74T Designed to handle the demands of competitive racing Compatible with most 1/10 scale electric RC platforms Includes: (1) Delrin Spur Gear (Select tooth count: 66T–74T) Trusted by champions. Built for speed. Dial in your drivetrain with Team Exalt.

Read more less

  Keep your shocks buttery smooth and leak-free with the TLR X-Ring Shock Seal Set. Designed as a direct replacement for all TLR 22, 22T, and 22SCT vehicles, this kit restores proper damping, reduces stiction, and improves long-term shock consistency. Whether you're rebuilding after a long race weekend or refreshing worn seals, these high-quality X-rings and O-rings provide a precise fit and excellent durability. Features Direct replacement for TLR 22 / 22T / 22SCT platforms X-ring seals deliver reduced friction and longer life Helps maintain smooth, consistent shock performance High-quality material resists swelling and leaking Perfect for routine maintenance or full shock rebuilds Includes (8) X-Ring Lower Cartridge Seals (4) Shock Cap O-Rings (4) Lower Cap O-Rings

Read more less

Eliminate the slip. Gain the edge. Upgrade your B6-series buggy with the Factory Team Direct Drive Slipper Eliminator Kit — the precision solution for racers who demand instant throttle response and maximum efficiency. This setup removes the traditional slipper assembly and mounts the spur gear directly to the top shaft, reducing rotating mass by 30% for quicker acceleration and sharper control. Perfect for Stock or Spec class racing (17.5T / 21.5T motors), this kit delivers smoother power transfer and improved consistency on high-traction surfaces like clay or dirt. Key Features: Direct-drive top shaft eliminates the traditional slipper clutch 30% lighter than the stock slipper assembly Faster acceleration from reduced rotating mass Improved drivetrain efficiency may extend run times Ideal for Stock or Spec racing (17.5T / 21.5T) Precision-machined Factory Team quality ⚠️ Note: Not recommended for use on carpet — high-grip surfaces may overstress idler gears. Includes: (1) Top Shaft (Direct Drive) (1) Direct Drive Hub (3) M3x0.5x5mm BHCS Screws (1) M4 Locknut w/Flange Compatible With: RC10 B6.1 / B6.1 Factory Lite / B6.1D RC10 B6.2 / B6.2D RC10 B6.3 / B6.3D RC10 B6.4 / B6.4D RC10 SC6.1 / SC6.2 RC10 T6.2 Team Associated Factory Team – precision, performance, perfection.  

Read more less

Overview:Deliver maximum power with ProTek RC Low Profile 5mm “Super Bullet” Connectors, engineered for clean wiring, low resistance, and uncompromising reliability in high-current RC applications. About the Super Bullet ConnectorsThe ProTek RC Low Profile “Super Bullet” connectors feature a flat, lay-down solder design that makes for a tidy and efficient wiring setup—perfect for compact builds or low-clearance installations. Constructed from solid gold-plated brass, these connectors ensure superior conductivity and minimal voltage loss compared to traditional spring-type or Deans-style plugs. Designed for brushless motors, ESCs, chargers, and high-voltage batteries, these connectors set the new standard for performance RC power delivery. Features: Low-profile solder head for flat, lay-down wire connections Solid gold-plated design for ultra-low resistance and maximum efficiency Ideal for high-current / high-voltage applications Perfect for use between ESCs, batteries, motors, or power meters Improved durability and conductivity over traditional plug styles Simple to solder and install Includes: (2) 5mm Low Profile “Super Bullet” Male Connectors Other 5mm Bullet Options: PTK-5022: Standard (4 Male) PTK-5023: Standard (4 Female) PTK-5024: Standard (2 Male / 2 Female)

Read more less

Reedy Blackbox 610R 2S Competition ESC – ASC27016Unleash precision, power, and full control with the Reedy Blackbox 610R — Reedy’s most advanced 1/10 scale ESC yet. Built on the trusted legacy of the 510R, the 610R pushes the limits with updated 32-bit hardware, lightning-fast throttle response, and unmatched tuning capability. Whether you're running stock or modified 1/10 scale setups, this ESC delivers championship-winning performance in both on-road and off-road racing. Pair it with the optional Blackbox PROgrammer2 (not included) to unlock full customization and data logging. 🔧 Key Features: CNC-machined black aluminum case with integrated heat sink Fully adjustable brake, throttle, power, and safety functions Blinky mode with ROAR-approved software 32-bit MCU for ultra-fast response Precision throttle & brake control Ultra-low resistance FET board On-board power button Optional external fan ready Pro external capacitor board Firmware updateable (with PROgrammer2) 🧠 Advanced Tuning (with Blackbox PROgrammer2 – ASC27027): Brake Settings: Strength, frequency, drag brake, punch, dynamic drag Throttle Control: Drive frequency, current limit, punch, deadband Power Delivery: Boost and top speed timing, standard & expert modes Misc. Settings: BEC voltage, temp cutoff, rotation direction, mode switching Note: Requires firmware version EE460139 on the Programmer. Already installed if purchased as the 610R/Programmer combo (ASC27017). 📦 Specs: Voltage Input: 2S LiPo Suggested Use: 1/10 Off-Road & On-Road Resistance: 0.00043 ohms Continuous Current: 160A Motor Limit: 4.5T Dimensions: 38.5 x 36.9 x 19.5mm Weight (no wires/fan): 45g BEC Output: 6.0–7.4V / 5A Power Wires: 13-gauge silicone Fan: Optional (not included)

Read more less

Cayote 2S 145C LCG Shorty LiHV Battery (7.6V/4600mAh) – w/5mm Bullets Dominate the Track with Low CG Power!Engineered for serious RC racers, the Cayote 2S 145C LCG Shorty LiHV Battery delivers lightning-fast acceleration, responsive throttle control, and high output — all in a lightweight, low-profile package. Perfect for 1/10 and 1/8 scale platforms seeking better balance and extreme performance. ✅ Features: 🔻 LCG (Low Center of Gravity) design for enhanced handling & cornering ⚡ 145C continuous discharge rate for aggressive power delivery 🏁 Built for competitive racing – from high-speed asphalt to rugged off-road 🔋 LiHV (High Voltage) technology boosts efficiency and top-end power 🔌 5mm bullet connectors for a secure, low-resistance connection 🧱 Hard case design ensures durability in demanding environments ✅ ROAR approved 📦 Includes: (1) Cayote 2S 145C LCG Shorty LiHV Battery (7.6V/4600mAh) 5mm bullet terminals (battery side) 📊 Specifications: Voltage: 7.6V (2S LiHV) Capacity: 4600mAh Discharge Rate: 145C continuous Charge Rate: Max 1C Connector: 5mm Bullets (Battery) / 2mm (Balance) Dimensions: 95.8 x 46.5 x 18.5mm Weight: 162g Configuration: 2S1P Watt Hours: 34.96Wh ROAR Approved: ✅ Yes Power meets precision — the Cayote 145C Shorty LiHV is your go-to pack for next-level racing. 🏆

Read more less

Refresh your suspension performance with the Team Associated B6.1/B6.1D Shock Caps & Spring Cups Set — the exact replacement parts included with the original B6.1 and B6.1D kits. This kit restores smooth, consistent shock action and leak-free performance with all-new caps, spring cups, o-rings, and bleeder screws. Perfect for maintenance, rebuilds, or keeping spares ready in your pit bag. Features Genuine Team Associated replacement parts Includes shock caps, spring cups, o-rings, and bleeder screws Restores smooth shock operation Direct fit with no modifications required Compatible Models RC10B6.1 RC10B6.1 Factory Lite RC10B6.1D RC10B6.2 RC10B6.2D RC10B6.3 RC10B6.3D RC10 B74 RC10 B74.1 RC10 B74.1D RC10 SC6.1 RC10 SC6.2 RC10 T6.2 Includes (4) Shock Caps (4) Spring Cups (4) O-Rings (4) Shock Cap Bleeder Screws

Read more less

Team Associated B6 Laydown Idler Gear (39T) (91716)Keep your laydown transmission running smooth with these genuine Team Associated 39T idler gears. Designed for the RC10 B6, B6.1, and B6.2 series buggies with a laydown setup, these are the direct replacements you need for peak drivetrain performance. Includes: (2) 39T Idler Gears Compatibility: RC10 B6 RC10 B6.1 RC10 B6.2 (with laydown transmission)

Read more less

Team Associated Gear Differential Rebuild [91463]🛠 Freshen Up Your Diff!Keep your ride dialed with the Team Associated Gear Differential Rebuild Kit, designed specifically for the optional ASC91461 gear diff. Whether you're doing routine maintenance or bringing a worn-out diff back to life, this kit has what you need to keep your buggy smooth, responsive, and race-ready. 🧰 Features:✅ Designed for the optional ASC91461 gear differential✅ Genuine Team Associated parts for perfect fit and function✅ Ideal for performance rebuilds and regular maintenance 📦 Includes:All necessary components to rebuild one gear differential 🔥 Part Number: 91463

Read more less