Upgrade your TRX-4M’s suspension with the INJORA 59mm Long Threaded Oil Shocks, designed to deliver smoother damping, increased articulation, and improved stability on rough terrain. Built from CNC-machined aluminum with threaded preload adjustment, these shocks offer true performance tuning for any 1/18 crawler. This listing is for a set of 2 shocks—perfect for upgrading either the front or rear of your TRX-4M. ⭐ Features Perfect fit for all 1/18 Traxxas TRX-4M crawlers Available Colors: Red, Black, Gray CNC-machined aluminum bodies for durability and style Threaded adjustment collars for quick preload tuning Telescopic design for maximum suspension travel Includes two spring rates per shock: Soft (0.45mm wire – black spring) Stiff (0.5mm wire – silver spring) Nylon bottom rod ends for durability Recommended shock oil: 20–40wt Shock oil not included Adjusting preload ring increases rebound capability 📏 Specifications Part Number: 4M-42 Full Length: 66mm (2.60") Extended Length: 59mm (2.32") Compressed Length: 42mm (1.65") Travel: 17mm (0.67") Spring Length: 45mm (1.77") Weight: 6g (0.21oz) each 📦 Includes (2) INJORA 59mm Aluminum Oil Shocks (Color selected at purchase) (2) Soft Springs (2) Stiff Springs

Read more less

Upgrade your Axial SCX30 with these premium INJORA Stainless Steel Drive Shafts, engineered for improved strength, durability, and scale realism. Designed specifically for the 1/30 Axial SCX30 platform, these shafts provide smoother rotation, a tighter drivetrain connection, and increased longevity compared to stock components. The in-phase design ensures efficient power transfer, while the reinforced joints and accurate scale dimensions make them a perfect blend of performance and realism. ⭐ Features Heavy-duty stainless steel construction In-phase design for smoother, more efficient rotation Reinforced joints for long-lasting durability Scale-accurate shaft and joint diameters for realistic appearance Rounded-rectangle drive holes create a tighter, more secure fit to transmission and axles 📏 Specifications Part Number: SCX30-01 Material: Stainless Steel Total Weight: 9.3g 📦 Includes (2) Stainless Steel Drive Shafts

Read more less

Take full control of your scale recovery setup with the INJORA Wireless Remote Receiver Winch Controller Set, designed for most 1/10 RC crawlers. This system gives you easy, wireless operation of your winch—perfect for Traxxas TRX-4, Axial SCX10, RC4WD builds, D90s, Tamiya CC01 rigs, and more. Just power the receiver, bind with the remote, and you're ready to control your winch without needing extra channels on your radio. Compact, easy to install, and incredibly convenient for trail trucks and scale rigs. Note: Winch and receiver shown in some photos are not included. ⭐ Features Compatible with most 1/10 scale RC winches Wireless remote for simple, fast winch control Plug-and-play receiver — easy installation Bind by holding the reset button until the red LED flashes Stable power range: 4.8V–12V Compact size fits easily into scale crawlers Ideal for TRX-4, SCX10, D90, CC01, and similar rigs 📐 Specifications Item: Wireless Winch Controller Quantity: 1 pcs Receiver Size: 41.5 × 31 × 10mm Controller Battery: 3V CR2032 (not included) Power Supply: 4.8–12V (from your receiver) Connection: As shown in wiring diagram/photos 📦 Includes (1) INJORA Wireless RC Winch Controller  

Read more less

Upgrade your TRX4M or TRX4MT with serious width, strength, and climbing stability.The INJORA CNC Aluminum +4mm Extended Axles add 4mm of width per side (8mm total), giving your rig a wider track for improved side-hilling, better stability, and enhanced overall performance. These come fully pre-assembled with hardened steel internals, extended housings, and brass hexes—ready for installation. Designed for maximum compatibility and durability, these axles provide a true extended-housing upgrade (not just longer dogbones), preventing binding and ensuring reliable long-term performance on extreme terrain. ⭐ Features Pre-assembled complete axles — grease recommended before installation +4mm wider per side (+8mm total track width) Full extended housing design reduces dogbone strain Improved climbing stability & side-hill performance Hardened steel CVD shafts & 12/24T steel gears Includes +1mm brass 5mm wheel hexes and nuts CNC-machined aluminum housings, black anodized High precision fit & excellent workmanship Same gear ratio as stock (24/12 = 2:1) 🔧 Compatibility Fits INJORA and Stock TRX4M Chassis, including: Chassis links Diff covers Gears Servo mounts C-hubs & steering knuckles ❌ Not compatible with: Stock TRX4M steering links Stock TRX4M dogbone shafts(Extended housings require longer links/shafts.) 📐 Specifications Part Number: 4M-61 Housing Material: Aluminum Gear Material: 20CrMo alloy steel CVD Shafts: Hardened steel Gear Ratio: 24/12 (2:1 — stock equivalent) Total Length: 122mm (4.80") Front Axle Weight: 48g (1.69oz) Rear Axle Weight: 42g (1.48oz) 📦 Includes (1) Extended Front Axle Assembly (1) Extended Rear Axle Assembly (2) Brass 5mm (+1mm) Wheel Hexes (2) Wheel Nuts

Read more less

Boost the steering power and durability of your TRX4M with the INJORA INJS2065 Waterproof High Voltage Digital Servo. Designed specifically for 1/18 TRX4M crawlers, this servo delivers strong torque, fast response, and full IP66 waterproof performance — perfect for trail, mud, snow, and creek crossings. This upgrade includes both the aluminum servo mount AND a 25T servo horn, giving you everything needed for a clean, direct installation. ⚠️ IMPORTANT:• Use only with the included INJORA servo mount for proper fitment.• If using the stock plastic TRX4M mount, trimming is required. 🔧 Compatibility Fits all 1/18 Traxxas TRX4M models: TRX4M Defender TRX4M Bronco TRX4M High Trail K10 TRX4M High Trail F150 ⭐ Features IP66 waterproof — safe for rain, mud, and underwater driving High-voltage digital servo (6V–8.4V) Strong stainless steel gears Fast response with excellent precision Includes aluminum servo mount Includes 25T servo horn Lower noise, smooth operation Durable, compact upgrade for any TRX4M build 📊 Specifications Model: INJS2065Voltage Range: 4.8V–8.4VMotor: Core MotorDead Band: 2μsNeutral Position: 1500μs / 330Hz Speed 0.09s / 60° @ 6.0V 0.06s / 60° @ 8.4V Torque 6.0 kg-cm (83.3 oz-in) @ 6.0V 7.0 kg-cm (97.2 oz-in) @ 8.4V Rotation Angles RC Angle: 90–120° ±2° Wide Angle (500–2500μs): 180° ±2° Size & Weight Dimensions: 23 × 13 × 25.8 mm Weight: 20g Wire: JR 300mm Spline: 25T (5.9mm) Bearing: 1BB 🧰 Required Tools 1.5mm hex driver 2.0mm hex driver 📦 Includes (1) INJORA INJS2065 Waterproof Servo (1) Aluminum Servo Mount (1) 25T Servo Horn Mounting Hardware

Read more less

Upgrade your TRX4M steering performance with the INJORA 11KG Coreless High Torque Micro Servo, engineered for speed, power, and precision. Designed specifically for high-voltage setups, this compact servo delivers lightning-fast response and massive torque — perfect for crawling, trailing, and high-load steering on the 1/18 TRX4M platform. ⚠️ IMPORTANT NOTE:This servo is NOT compatible with the stock TRX4M servo mount or horn.A special servo mount + 25T micro horn is required.Not waterproof — avoid water, mud, and rain. 🔧 Compatibility Works with all 1/18 Traxxas TRX4M models: TRX4M Defender TRX4M Bronco TRX4M High Trail K10 TRX4M High Trail F150 Pairs perfectly with the INJORA Micro BEC for TRX4M (recommended for full HV performance). ⭐ Features Coreless motor for ultra-fast response Up to 11kg-cm (153 oz-in) of high-voltage torque CNC-machined aluminum case for maximum cooling and durability Stainless steel gears for long-term reliability Smooth and precise digital control Dual ball bearings for increased efficiency and longevity Mini 25T spline 📊 Specifications Part Number: INJS11Operating Voltage: 6V–8.4V Voltage Torque Speed (per 60°) 6.0V 8kg-cm (111 oz-in) 0.106s 7.4V 9.5kg-cm (132 oz-in) 0.085s 8.4V 11kg-cm (153 oz-in) 0.074s • RC Angle: 90° ± 5° Wide Angle (500–2500μs): 180° ± 5° Motor: Coreless Gears: Stainless Steel Spline: 4.9mm Mini 25T Bearings: Dual Ball Bearing Size: 32 × 12 × 27mm Weight: 21g (0.74oz) 🧰 Tools Required 0.05" (1.27mm) hex driver 1.5mm hex driver Servo may come with either a black or red horn 📦 Includes (1) INJORA INJS11 High Voltage Coreless Servo (1) Servo Horn (color may vary) Mounting hardware

Read more less

Exclusive Gold Edition • Clipless Mounting • Full Hard Body System Transform your TRX-4M into a show-stopping scale rig with the INJORA Limited Edition IR60 hard body set. This special Gold Edition offers a premium visual style paired with a rugged ABS construction and smart mounting features designed for convenience and realism. Compatible with both the Traxxas TRX-4M Defender & Bronco chassis and the INJORA Universal TRX4M chassis, this body kit delivers exceptional fit, durability, and scale detail. With dual grille options, a rear bed rack, rubber mirrors, and included LED lighting, the IR60 is built for serious builders and collectors. ⭐ Features Limited Edition Gold Finish for standout scale appearance Durable ABS pickup hard body with integrated bed rack Includes two interchangeable front grille styles Rubber rearview mirrors for added durability Clipless front mount + rear hook-and-loop hinge Quickly access chassis & battery by swinging the body upward Simple installation: only four screws required Includes front & rear LED lights for added realism 📏 Specifications Part Number: IR60-GD Material: ABS Plastic Color: Gold (Limited Edition) Weight: 78g Wheelbase: 155mm Size: 225 × 90 × 67mm 📦 Includes (1) INJORA IR60 Hard Body Kit (Gold) (1) Front & Rear LED Light Set (1) Body Assembly Manual ✅ Compatibility Traxxas TRX-4M Defender (1/18) Traxxas TRX-4M Bronco (1/18) INJORA Universal TRX4M Chassis

Read more less

Upgrade your Axial SCX24’s steering precision and front-end stability with these INJORA 14g Heavy Brass Steering Links. Machined from solid brass and designed as a direct replacement for the stock steering links, this upgrade increases front axle weight for improved crawling traction while delivering tighter, more responsive steering control. Available in raw brass or black-coated brass, these links enhance both performance and scale appearance. ⭐ Features High precision CNC-machined construction Solid brass design for increased strength and durability Adds 14 grams of weight to improve front-end stability and climbing traction Simple, direct bolt-on installation Replaces the stock SCX24 steering link assembly Available in two finishes: Brass or Black Brass 📏 Specifications Part Numbers: SCX24-188 (Brass), SCX24-188BK (Black) Material: Brass Weight: 14g 📦 Includes (1) Heavy Brass Steering Link Assembly

Read more less

⚙️ Precision Gearing for Power, Speed & Control Fine-tune your 1/18 TRX4M’s performance with the INJORA Stainless Steel Transmission Gear Set, engineered for maximum strength and customizable drive ratios. Whether you’re after extreme torque for rock crawling or faster wheel speed for trail runs, this complete set delivers the perfect balance of performance, durability, and precision. ⚡ Features: 🔩 CNC-machined stainless steel gears for long-lasting durability 🧭 Multiple gear ratios for custom underdrive or overdrive setups 💪 Ultra-low 40.3:1 reduction gives unstoppable torque for technical climbing ⚙️ Includes 11T motor pinion — ready to install and tune 🧴 Pro Tip: Don’t forget to grease the gears before installation for smooth operation and longer life 📏 Specifications: Part Number: 4M-36 Material: Stainless Steel Reduction Ratios: 40.3:1 → Extreme Underdrive (≈ -59%) 24.4:1 → Moderate Underdrive (≈ -32%) 16.61:1 → Stock Ratio 9.7:1 → Overdrive (≈ +71%) Motor Pinion: 11T Weight: 15g (0.53oz) 📦 Includes: (1) Complete Transmission Gear Set (1) 11T Motor Pinion 🔧 Compatibility: 1/18 Traxxas TRX4M (Defender, Bronco, K10, F-150) INJORA 370 Transmission 💡 Pro Tip:Run the 40.3:1 set for low-end torque and precise control on steep climbs, or the 9.7:1 overdrive for high-speed trail performance. Keep multiple sets in your pit to swap for any terrain.  

Read more less

🧗♂️ Stick, Climb & Conquer Every Trail! Give your micro crawler unstoppable traction with the INJORA 1.0" Cling On Tires. Built from the ultra-sticky S5 Super Soft Compound, these tires deliver next-level grip and control on rock, dirt, and uneven terrain. At 64 mm tall and 24 mm wide, they strike the perfect balance between ground clearance and sidewall flex for ultimate crawl performance. ⚡ Features: 🧲 Super Soft S5 Compound for maximum traction and flexibility 🏔️ Aggressive tread pattern bites hard on all surfaces 🔁 Consistent, long-lasting performance in any terrain ⚙️ Perfect fit for 1/18 & 1/24 scale crawlers 🧩 Compatible with INJORA Silicone Rubber Inserts (#1062) 📏 Specifications: Part Number: T1020 Compound: S5 Super Soft & Sticky Outer Diameter: 64 mm Width: 24 mm Weight: 15 g (each) 📦 Includes: (4) INJORA 1.0" Cling On Tires 🔧 Compatibility: Axial SCX24 FMS FCX24 Traxxas TRX-4M Other 1/18 & 1/24 RC crawlers using 1.0" wheels 💡 Pro Tip:Pair these with INJORA 1.0" beadlock wheels and Silicone Inserts (#1062) for the ultimate micro-crawler setup — maximum grip + super realistic sidewall behavior.  

Read more less

💪 Lower Center of Gravity. Higher Clearance. Maximum Control. Upgrade your TRX4M’s suspension geometry and stability with the INJORA Brass High Clearance Links Set, CNC-machined for precision and strength. Available in raw brass or black-coated brass, these links not only enhance performance but also add a sleek, premium look to your crawler. ⚡ Features: 🧱 CNC-machined brass construction for strength and durability 🧗 High-clearance bent links improve obstacle approach angles and articulation ⚖️ Heavy 42 g brass weight lowers the center of gravity for improved climbing stability 🖤 Optional black hard-coat finish with chamfered edges — corrosion-resistant and stylish 🔧 Direct bolt-on fit — replaces stock plastic links with zero modification 📏 Specifications: Part Number: 4M-40 Material: Brass (Raw or Black-Coated) Quantity: 8 PCS Weight: 42 g (1.48 oz) 📦 Includes: (1) Complete Brass High Clearance Links Set 🔧 Compatibility: 1/18 Traxxas TRX4M Defender 1/18 Traxxas TRX4M Bronco 💡 Pro Tip:Pair these with INJORA brass wheel weights or stainless driveshafts to create a low-centered, ultra-stable crawler that hugs every line.  

Read more less

🔥 Wider Stance. Lower Center. Superior Control. Upgrade your Axial SCX24 with INJORA 7mm Brass Wheel Hex Hub Extenders for improved stability, precision, and handling. These high-quality brass and aluminum adapters allow you to fine-tune your crawler’s track width — increasing width up to 3mm per side — while adding low-end weight for better climbing balance. Perfect for dialing in your stance and achieving that planted, scale look on any SCX24 platform. ⚡ Features: 🛠️ Made from premium brass and aluminum alloy for strength and accuracy 🧲 Extend track width 0–3mm per side for enhanced stability 💪 Adds low-mounted weight to improve traction and climbing control 🎨 Available in Brass, Red, or Black finishes ⚙️ 7mm wheel hex design for direct fit on all SCX24 models 🔩 Includes multiple thickness options for precise tuning 📏 Specifications: Material: Brass / Aluminum Alloy Color Options: Brass, Red, Black Thickness Options: 3mm, 4mm, 5mm, 6mm Hex Width: 7mm Compatibility: Axial SCX24 Series (AXI90081, AXI00002, AXI00001, AXI00004) 📦 Includes: (1) Set of SCX24 Wheel Hex Hub Extenders (choose thickness/color) 💡 Pro Tip:For a balanced setup, match these extenders with INJORA Brass Diff Covers and Big Bore Shocks — giving your rig both the stance and stability it deserves.

Read more less

🏁 Upgrade Your Micro Rig with True Oil Dampening! Take your micro crawler’s suspension to the next level with the INJORA 40mm Big Bore Oil Shocks. Precision-engineered from CNC aluminum with a true oil-filled design, these shocks deliver smooth, consistent performance and improved control over rough terrain. Perfect for the Axial SCX24, FCX24M, and other 1/24 crawlers, they bring big performance to small-scale rigs. Note: Use only a light coating of shock oil (not included). Do not completely fill the body. ⚡ Features: 🛠️ CNC-machined aluminum shock caps, bodies, and bottom caps ⚙️ Black electroplated steel shafts for strength and smooth action 💪 Big bore design holds more oil for enhanced dampening 🔩 Threaded bodies for quick pre-load and ride height adjustment 🧩 Two spring rates included for tuning flexibility 🟤 Choice of materials: Nylon or brass lower rod ends 🧈 Consistent rebound thanks to internal bladder seals 📏 Specifications: Part Number: SCX24-179BR Material: Aluminum & Nylon / Aluminum & Brass Full Length: 46.5mm (1.83in) Eye-to-Eye Length: 40mm (1.57in) Maximum Travel: 9mm (0.35in) Weight: 3.2g (nylon), 4.3g (brass) 📦 Includes: (4) INJORA Big Bore Oil Shocks (4) Optional Springs 🔧 Compatibility: Axial SCX24 FMS FCX24M Other 1/24 scale micro crawlers 💡 Pro Tip:For optimal performance, apply a light coating of 20–30wt oil — just enough to cover the shaft — to achieve realistic rebound and control without over-dampening.

Read more less

🛞 Roll Smoother. Last Longer. Perform Better. Upgrade your Traxxas TRX4M with the INJORA 22PCS Steel Sealed Bearing Kit, engineered for smoother operation, reduced friction, and longer-lasting drivetrain performance. This complete set replaces every stock bushing on your rig with precision stainless steel bearings, keeping your crawler running quietly, efficiently, and dust-free. ⚡ Features: 🔒 Fully sealed and dustproof — protects against dirt and debris 🧭 Replaces all stock bushings for smoother, more efficient drivetrain performance ⚙️ High-precision stainless steel construction for durability and reliability 🪶 Low-friction design improves throttle response and overall control 🧰 Complete 22-piece kit includes every bearing needed for front, rear, and transmission assemblies 📏 Specifications: Part Number: 4M-03 Material: Stainless Steel Bearing Types (22 Total): Front Axle:(2) 3x6x2.5mm(2) 3.5x7x2.5mm(2) 4x8x3mm(2) 5x8x2.5mm(2) 8x12x3.5mm Rear Axle:(2) 3.5x7x2.5mm(2) 4x8x3mm(2) 5x8x2.5mm Transmission:(6) 3x6x2.5mm 📦 Includes: (22) Sealed Stainless Steel Bearings Organized and ready for direct installation 🔧 Compatibility: 1/18 Traxxas TRX4M (Defender / Bronco / High Trail / K10 / F-150) 💡 Pro Tip:Pair these with INJORA’s complete aluminum transmission or driveshaft set to reduce drivetrain drag and extend component life — a must for smooth, efficient crawling.  

Read more less

⚙️ Ultimate Torque. Total Control. Boost your TRX4M’s crawling power with the INJORA CNC Aluminum Complete Transmission, pre-assembled and precision-machined for maximum strength and performance. Featuring the 40.3:1 underdrive gear ratio, this transmission delivers extreme torque and smooth throttle response — perfect for technical rock crawling and slow-speed control. ⚡ Features: 🧱 Pre-assembled and ready to install 💪 High-torque 40.3:1 underdrive gearing for maximum low-end power (≈ -59%) ⚙️ CNC-machined aluminum housing for strength and durability 🖤 Black anodized finish for a clean, factory look 🧩 Direct bolt-on fit for the TRX4M — no modification required 📏 Specifications: Part Number: 4M-55UD-BK Material: CNC Aluminum Color: Black Internal Ratio: 40.3 : 1 (Underdrive 59%) Weight: 32 g (1.13 oz) 📦 Includes: (1) Pre-assembled INJORA CNC Aluminum Complete Transmission 🔧 Compatibility: 1/18 Traxxas TRX4M (Defender / Bronco / K10 / F-150) 💡 Pro Tip:Pair this with INJORA brass links and weighted wheels for unstoppable torque, precise control, and better stability on steep climbs.  

Read more less

⚙️ Ultimate Strength. Smoother Shifts. Superior Durability. Upgrade your crawler’s heart with the INJORA CNC Aluminum Complete Transmission Gearbox, precision-engineered for the Axial SCX24 and AX24 platforms. This drop-in upgrade delivers unmatched strength, smoothness, and longevity — a true performance overhaul for your micro rig. Machined from CNC aluminum with hardened steel gears, this gearbox dramatically increases wear resistance and efficiency, ensuring smooth, consistent power delivery across climbs and descents. Available in Red or Black to match your build’s style. ⚡ Features: 🛠️ Precision CNC-machined aluminum case for enhanced durability ⚙️ Hardened steel gears for maximum strength and longevity 🧩 Direct-fit design — fully assembled and ready to install 🧲 Upgraded reliability vs. stock plastic gearbox 🎨 Available in Red or Black anodized finishes 🏁 Perfect balance of weight and performance for improved handling 📏 Specifications: Part Number: SCX24-130 Case Material: CNC Aluminum Gear Material: Hardened Steel Motor Pinion Material: Nylon Weight: 16g (0.56oz) Transmission Gears: 51T & 19T Spur Gear: 0.3 Mod, 55T Pinion Gear: 11T (Nylon) 📦 Includes: (1) INJORA Complete CNC Aluminum Transmission Assembly 🔧 Compatibility: Axial SCX24 (all series) Axial AX24 💡 Pro Tip:Pair this transmission with INJORA Overdrive/Underdrive Gears (SCX24-77) for full control over your crawl ratio — giving your rig the perfect blend of torque and speed.  

Read more less

🪨 Conquer Any Terrain with Realistic Grip and Scale Style! Built for serious crawling and realistic performance, the INJORA 1.3" Rock Crawling Tires deliver unbeatable traction, flexibility, and scale looks. Featuring the ultra-sticky S5 Super Soft Compound, stepped tread blocks, and precision sipes, these tires maximize grip while maintaining consistent, predictable performance on rock, dirt, or trail. Perfect for your 1/18 or 1/24 micro crawler build. ⚡ Features: 🏔️ Incredible scale detail with realistic sidewall and tread design 🧲 Made from Super Soft & Sticky INJORA S5 compound for extreme traction ⚙️ Stepped tread blocks and multi-siped lugs for unmatched crawling grip 💪 Long-lasting durability and consistent performance over time 🧩 Compatible with INJORA Silicone Rubber Inserts (#1370) for ideal tire support 📏 Specifications: Part Number: T1311 Compound: S5 (Super Soft & Sticky) Outer Diameter: 70 mm Width: 26 mm Weight: 21 g (each) 📦 Includes: (4) INJORA 1.3" Rock Crawling Tires 🔧 Compatibility: Axial SCX24 FMS FCX24 Traxxas TRX-4M Other 1/18 & 1/24 scale RC crawlers using 1.3" wheels 💡 Pro Tip:Pair with INJORA 1.3" Beadlock Wheels and Rubber Inserts (#1370) for maximum contact patch, realistic sidewall flex, and ultimate micro-crawler performance.  

Read more less

⚙️ Fine-Tune Your Crawl Ratio for Maximum Control! Unlock next-level crawling precision with the INJORA Overdrive & Underdrive Gears — the ultimate upgrade for Axial SCX24 and AX24 owners. Designed from hardened steel for unmatched durability, these gear sets let you fine-tune your drivetrain for better climbing, improved cornering, and reduced rollovers. Choose your setup: Overdrive the front for more aggressive climbs and tighter turns, or Underdrive the rear for smoother control and slower descent. ⚡ Features: 🔩 Hardened steel construction for long-lasting performance 🔄 Front or rear compatible — works in both axles ⚙️ Fine-tune crawl behavior: 2/12T Overdrive → +33% speed 2/13T Overdrive → +23% speed 2/14T Overdrive → +14% speed 2/16T → Neutral (no speed change) 1/12T Underdrive → –33% speed 2/18T Underdrive → –11% speed 🧲 Improves climbing and steering precision 🚙 Reduces rollover and enhances traction 📏 Specifications: Part Number: SCX24-77 Material: Hardened Steel Weight: 4g (0.14oz) Compatibility: Axial SCX24 (all series) & AX24 📦 Includes: (1) INJORA Overdrive or Underdrive Gear Set (choose ratio) 💡 Pro Tip:Pair with INJORA Brass Diff Covers and Big Bore Shocks to optimize both your weight distribution and low-speed crawl precision — the perfect combo for serious scale performance.  

Read more less

⚙️ Built Tough. Tuned Precise. Ready for Anything. Upgrade your TRX4M drivetrain with INJORA Black Hardened Steel Drive Shafts, precision-machined for strength, accuracy, and a tight, vibration-free fit. Designed specifically for the 1/18 TRX4M Defender and Bronco, these shafts feature D-shaped and rounded rectangle holes for a more secure connection, plus correct in-phase design for smooth power delivery. ⚡ Features: 🔩 CNC-machined hardened steel for maximum durability and torque resistance 🧩 In-phase design ensures smooth and balanced power transfer 🔒 D-shaped and rounded rectangle holes create a tighter, more reliable connection 🪶 Enhanced structure for extended lifespan and superior drivetrain stability 🖤 Black-coated finish with etched INJORA logo for premium style and protection 🧠 True-to-scale joint and spline design maintains a realistic crawler appearance 📏 Specifications: Part Number: 4M-50BK Material: Hardened Steel Color: Black Weight: 22 g (0.78 oz) 📦 Includes: (2) Hardened Steel Drive Shafts (4) Mounting Screws 🔧 Compatibility: 1/18 Traxxas TRX4M Defender 1/18 Traxxas TRX4M Bronco 💡 Pro Tip:Pair these with INJORA stainless or brass link kits to maximize driveline durability and reduce flex when tackling extreme terrain.

Read more less

🔌 Cooler Connections. Faster Changes. Longer Life. Upgrade your RC power connections with the INJORA Heatsink Bullet Plug Grips — CNC-machined from aluminum for precision and performance. Designed for both 4mm and 5mm bullet connectors, these grips offer better handling, improved heat dissipation, and a sleek, pro-grade look for your wiring setup. ⚡ Features: 🔩 CNC aluminum plug grips paired with high-quality brass bullet connectors 🧤 Textured grips make plugging and unplugging fast and effortless 🔴⚫ Color-coded with positive & negative markings for easy polarity ID ❄️ Heatsink design improves heat dissipation, reducing connector wear 🔒 Secure fit and easy installation — a premium upgrade over standard bullets 📏 Specifications: Part Number: INA-117 Plug Grip Material: Aluminum Bullet Material: Brass Bullet Sizes: 4mm & 5mm Colors Available: Black or Red 📦 Includes: (1) Set of INJORA Heatsink Bullet Plug Grips (includes 4mm and 5mm bullets) 💡 Pro Tip:Match these with your ESC and battery leads for a clean, professional look that performs as good as it looks — perfect for racers and builders who demand reliability and style.    

Read more less

🔑 Carry Your RC Passion Everywhere Show off your love for the INJORA brand with this premium Carbon Fiber Lanyard Keychain — a sleek, lightweight accessory that’s perfect for keys, tools, or even your transmitter bag. Built with real carbon fiber and durable paracord, it’s the perfect balance of strength, style, and function. ⚡ Features: 🏁 Carbon fiber logo tag with the official INJORA branding 🔩 Strong metal key clip — secure your keys or RC tools 🧵 Durable nylon paracord loop for long-lasting use 💨 Lightweight and easy to carry anywhere 💯 Perfect everyday accessory for RC enthusiasts 📏 Specifications: Part Number: INA-128 Material: Carbon Fiber Tag + Metal Clip + Nylon Cord Length: 185mm Weight: 12.2g Quantity: 1 Piece 📦 Includes: (1) INJORA Carbon Fiber Keychain Lanyard 💡 Pro Tip:Attach it to your transmitter case, pit bag, or tool set — it’s a stylish way to keep your essentials organized and show off your RC pride.  

Read more less

⚙️ Fine-Tune Every Detail of Your Build The INJORA Stainless Steel Spacer & Washer Set is a must-have for builders who like precision. Perfect for custom link setups, suspension tuning, wheel spacing, or body adjustments, these shims help you dial in exact fitment on your 1/18 TRX4M or other micro crawlers. Each pack includes four different thickness options for total flexibility. ⚡ Features: 🧱 Made from durable stainless steel for strength and corrosion resistance 🔧 Multi-use design — ideal for shocks, links, or wheel adjustments 🧲 Perfect fit for M2.5 hardware on TRX4M platforms 🎯 Includes 1mm, 2mm, 3mm, and 4mm spacers for precise tuning 📦 Organized and reusable packaging for easy workshop use 📏 Specifications: Part Number: 4M-52 Material: Stainless Steel Inner Diameter: 2.5 mm Outer Diameter: 4 mm Heights: 1 mm / 2 mm / 3 mm / 4 mm Total Pieces: 80 📦 Includes: 20 × M2.5 × 4 × 1 mm Washers 20 × M2.5 × 4 × 2 mm Washers 20 × M2.5 × 4 × 3 mm Washers 20 × M2.5 × 4 × 4 mm Washers 🔧 Compatibility: 1/18 TRX4M (Defender / Bronco / K10 / F-150) Other micro crawlers using M2.5 hardware 💡 Pro Tip:Keep this kit in your pit box — it’s the easiest way to eliminate slop, correct alignment, and perfect your suspension geometry between runs.    

Read more less

🧰 High-Strength Hardware for Serious Builders Upgrade your TRX4M’s reliability with the INJORA Grade 12.9 Stainless Steel Hardware Kit. Built for durability and precision, this kit includes a full selection of button-head screws and nuts to replace or upgrade the stock fasteners on your 1/18 TRX4M. With corrosion-resistant stainless steel construction and organized storage, this is a must-have kit for any serious RC crawler enthusiast. ⚡ Features: 🔩 Made from Grade 12.9 stainless steel — extreme strength and corrosion resistance 🧱 Direct fit for TRX4M — replaces stock hardware (except diff cover screws) 🧰 Includes multiple sizes and lengths to fit any build need 💪 Prevents rust, bending, and stripped heads for long-term performance 📦 Comes in a labeled storage box for easy organization and access 📏 Specifications: Part Number: 4M-15 Material: Grade 12.9 Stainless Steel Finish: Silver Polished Compatibility: 1/18 TRX4M (Defender, Bronco, K10, F-150) Note: Does not include screws used in the stock diff covers 📦 Includes: 10 × M1.6 × 7 mm Screws 12 × M1.6 × 12 mm Screws 10 × M2 × 4 mm Screws 45 × M2 × 6 mm Screws 10 × M2 × 8 mm Screws 10 × M2 × 12 mm Screws 8 × M2.5 × 8 mm Screws 10 × M2.5 × 10 mm Screws 10 × M2.5 × 12 mm Screws 20 × M2.5 × 14 mm Screws 15 × M2.5 × 18 mm Screws 5 × M2.5 × 21 mm Screws 3 × M3 × 6 mm Flat-Head Screws 28 × M3 × 6 mm Pins (Various Types) 10 × M2.5 Nuts (1) Reusable Plastic Storage Case 💡 Pro Tip:Keep one of these kits in your pit box — it’s the fastest way to replace missing hardware and keep your TRX4M tight and trail-ready after every run.    

Read more less

🧱 Strong. Smooth. Built for the Trail. Upgrade your TRX4M Defender or Bronco with the INJORA Stainless Steel High Clearance Chassis Links Set — engineered to deliver superior strength, smoother articulation, and extra clearance for serious crawling. These precision stainless links are designed to replace your stock plastic links, giving your rig the confidence and control it deserves on every climb. ⚡ Features: 💪 Durable stainless steel construction for maximum rigidity and long life 🧭 High-clearance bent link design improves obstacle clearance and suspension travel 🔩 Direct fit upgrade — replaces stock plastic links, no modifications required 🧲 Smooth articulation for consistent crawling performance 🏁 Trail-proven performance for TRX4M Defender & Bronco platforms 📏 Specifications: SKU: TRX4M-08SR Material: Stainless Steel Links with Plastic Rod Ends Quantity: 8 Pieces Weight: 37g (1.31oz) Finish: Polished Stainless 📦 Includes: (1) INJORA Stainless Steel Chassis Links Set 🔧 Compatibility: 1/18 TRX4M Defender 1/18 TRX4M Bronco 💡 Pro Tip:Pair these chassis links with INJORA Brass Diff Covers or Brass Wheel Weights for improved stability and a lower center of gravity on steep climbs.    

Read more less

⚙️ Add Weight, Stability & Width to Your Rig! Upgrade your crawler’s stance and handling with the INJORA Brass Wheel Hex Hub Extenders. These precision-machined brass adapters lower your vehicle’s center of gravity and widen its track for better stability, traction, and control. Available in multiple widths and pack sizes, they’re the perfect tuning option for your Traxxas TRX-4, TRX-6, or Mercedes G63 crawler. ⚡ Features: 🟡 CNC-machined from solid brass for added durability and precision fit ⚖️ Extra weight helps lower the center of gravity, improving stability on climbs 🚙 Wider stance increases traction and prevents rollovers 🔩 Easy bolt-on installation using standard M4 hardware 📏 Multiple options available: 4PCS or 6PCS sets 5mm, 8.5mm, or 10mm thickness 📏 Specifications: Material: Brass Hex Width: 12mm Thickness Options: 5mm / 8.5mm / 10mm Weight: 5g (5mm) / 7g (8.5mm) / 11g (10mm) each Hardware: M4 screw pins Quantity Options: 4PCS or 6PCS sets 📦 Includes (varies by option): (4) or (6) Brass Wheel Hex Hub Extenders (4) or (6) M4 Screw Pins 🔧 Compatibility: Traxxas TRX-4 Traxxas TRX-6 Traxxas TRX-6 Mercedes G63 Other 1/10 RC crawlers with 12mm hex 💡 Pro Tip:Mix extender sizes (front vs rear) for custom track width tuning — a wider front stance helps with steering bite, while balanced widths improve sidehill stability.

Read more less

💡 Light Up Your Night Crawls! Bring your micro crawler to life with the INJORA LED Whip Light, designed for 1/18 and 1/24 scale RC rigs. Whether you’re running late-night trail sessions or just want to add some serious style to your build, this whip light delivers bright, customizable color options and easy plug-and-play installation. Note: A separate light controller (sold separately) is required to activate steady, breathing, and strobe modes. ⚡ Features: 💎 4 Color Options: Red, Ice Blue, Pinkish Purple, or Green 🧭 Easy to Install: Simple wiring and mounting for fast setup 🔩 Mount Options: Choose roll cage mount or body mount for perfect placement 🌙 Enhanced Visibility: Bright LED glow stands out during night runs 🪶 Lightweight & Durable: Weighs just 3.6g with sturdy construction 🚙 Perfect Fit: Ideal for 1/18 & 1/24 crawlers and other mini RC rigs 📏 Specifications: Voltage: 5–7.4V Height: 107mm Weight: 3.6g Colors: Red, Ice Blue, Pinkish Purple, Green Lighting Modes (with controller): Steady, Breathing, Strobe Control Options: Manual or CH3 button on transmitter 📦 Includes: (1) INJORA LED Whip Light 🔧 Compatibility: 1/18 & 1/24 scale RC crawlers (such as TRX-4M, SCX24, FCX24, and similar) 💡 Pro Tip:Add the optional INJORA LED Light Controller for full control of lighting effects — perfect for show rigs or night trail adventures!  

Read more less

🎛️ Control the Glow — Command Your Lights! Bring your mini crawler’s lighting system to life with the INJORA LED Light Controller, designed to unlock the full potential of your INJORA LED Whip Lights and other 5–7.4V lighting accessories. Switch between steady, breathing, and strobe modes at the press of a button — or from your transmitter’s CH3 channel — for the ultimate control and night-trail style. ⚡ Features: 🎨 3 Dynamic Modes: Steady, Breathing, and Strobe effects 🔘 Dual Control Options: Manual toggle or CH3 transmitter control 🔌 Plug-and-Play Setup: Quick connection to any INJORA LED Whip Light ⚡ Wide Voltage Range: Works with 5–7.4V systems 💪 Lightweight & Durable: Compact build with reliable performance 🧭 Flexible Mounting Length: 175mm (6.89in) total cable length 📏 Specifications: Operating Voltage: 5–7.4V Length: ~175mm (6.89in) Weight: 3.2g Lighting Modes: Steady, Breathing, Strobe Control Options: Manual switch or CH3 channel 📦 Includes: (1) INJORA LED Light Controller 🔧 Compatibility: INJORA LED Whip Lights (DG-L34 Series) Other 5–7.4V LED accessories for 1/18 & 1/24 crawlers 💡 Pro Tip:Pair with INJORA DG-L34 Whip Lights to complete your light system and add striking visual effects to your trail rig!  

Read more less