Give your B74.2 the aerodynamic advantage it deserves with the JConcepts S15—a refined, high-performance body shell designed for peak competition. Inspired by the winning heritage of the Silencer series, the S15 introduces updated airflow features, improved chassis clearance, and stability enhancements tailored specifically for the Team Associated RC10 B74.2 platform. Available in Standard or Lightweight options to suit your setup and driving style. S15 Body Overview JConcepts engineered the S15 to complement the modern B74.2 chassis layout. This includes raised side-pods for compatibility with tall shorty packs and saddle configurations, as well as tuned aerodynamics for improved cornering and stability. Mid-body winglets and a rear stabilizer kick-up provide enhanced downforce, while the signature cockpit “shark fin” increases straight-line tracking and structural integrity. The result: a body that delivers balance, steering predictability, and high-speed stability across carpet, turf, and dirt surfaces. Key Features Precision fit for the Team Associated RC10 B74.2 Updated S15 aero package for improved stability and corner speed Forward cab bias for aggressive steering response Mid-body winglets & rear kick-up for added downforce Cockpit “shark fin” enhances tracking and rigidity Raised rear side-pods for modern battery layouts Clear polycarbonate with overspray protective film Available in Standard or Lightweight versions Includes (1) JConcepts RC10 B74.2 S15 Clear Buggy Body (1) Carpet Wing (1) Decal Sheet (1) Window Mask Set Note Body ships clear and unpainted Painted examples shown for reference only

Read more less

Sharpen Your Steering. Increase Stability. Go Faster. Dial in front-end precision with the Team Associated RC10T7/RC10SC7 Front Anti-Roll Sway Bar Set — a must-have tuning upgrade for racers looking to reduce chassis roll, increase steering consistency, and fine-tune handling for any surface. Whether you're running high-grip carpet, loose dirt, or rough outdoor terrain, this sway bar set helps keep the front of your truck planted and predictable where it matters most. About the Sway Bar Set Versatile Tuning for Any Track The Front Anti-Roll Sway Bar Set gives you multiple bar thickness options so you can tailor front-end stability to match your track conditions and driving style. ✔ Thicker bar = more stability, smoother steering✔ Thinner bar = more steering rotation This lets you quickly tune steering response, reduce traction rolling, and achieve a balanced, confidence-inspiring setup. Features Three sway bar sizes for fine-tuned handling Reduces chassis roll for improved front-end consistency Boosts steering stability on tight, loose, or bumpy tracks A must-have in any race-day tuning kit Direct fit for RC10SC7 and RC10T7 platforms Includes (1) Front Anti-Roll Sway Bar Set (multiple bar thicknesses)

Read more less

Precision Fit. Proven Strength. Upgrade your suspension geometry with the Team Associated Factory Team Aluminum 3-Gear Gearbox Arm Mount “C” Block. Designed for the RC10B7, B7D, T7, and SC7 platforms, this CNC-machined aluminum mount provides superior strength, precise alignment, and long-lasting durability under the toughest racing conditions. Factory-Grade Performance Engineered to maintain suspension integrity and reduce flex, this aluminum “C” block ensures consistent handling through high-speed corners and rough landings. Whether you’re chasing podiums or fine-tuning setup precision, this component delivers the reliability and performance serious racers expect from Team Associated. Features: CNC-machined aluminum construction for maximum rigidity and precision fit Designed for 3-gear gearbox setups Improves consistency and handling through rough terrain Factory Team engineering for professional-grade reliability Direct replacement for stock “C” block Includes: (1) Aluminum 3-Gear Gearbox Arm Mount “C” Block Compatibility: Team Associated RC10 B7 Team Associated RC10 B7D Team Associated RC10 T7 Team Associated RC10 SC7 Team Associated Factory Team — Engineered to Win.

Read more less

Fine-tune your gearing with the Team Associated 48 Pitch, 69 Tooth Spur Gear. This optional upgrade offers smooth, efficient power transfer and allows racers to dial in the perfect gear ratio for their setup. 🔥 Key Features: Precision-molded 48 pitch, 69 tooth spur gear Provides smooth, efficient drivetrain performance Optional tuning part for gearing adjustments Genuine Team Associated quality for durability and accuracy ✅ Compatibility: Team Associated Apex Team Associated TC5 Team Associated TC6.1 Team Associated TC6.2 Team Associated TC7 (Original) Team Associated TC7.1 Team Associated TC7.2 📦 Includes: (1) 48P Spur Gear (69T) ⚠️ Tip:Pair with the right pinion gear to optimize top speed vs. acceleration for your track conditions.  

Read more less

Boof RC EC5 Female to TRX-Style Male Adapter⚡ Seamless Power Conversion — Boof Style. This Boof RC adapter connects an EC5-equipped battery to vehicles using a TRX-style plug (compatible with Traxxas-style connectors—without naming names). Made with quality materials and a compact design, it’s perfect for racers, bashers, and anyone needing a reliable connection without the hassle of soldering. ✅ EC5 Female to TRX-Style Male✅ 12AWG wire for solid current handling✅ Compact and clean 5cm length✅ Great for adapters, charging setups, or direct installs✅ No soldering required—plug and play! 📦 Includes:(1) EC5 Female to TRX-Style Male Adapter 💡 Boof Tip: Keep a few in your pit bag—you never know when a mismatched plug combo will show up.

Read more less

Boof RC Charging Lead – XT60 Female to EC3 Male A compact powerhouse for your charging setup, the Boof RC XT60 to EC3 lead is built for racers who need reliable performance and clean connections. Whether you're charging 2S or 3S LiPos, this lead handles the job with ease. ✅ XT60 Female plugs directly into your charger✅ EC3 Male fits many mid-size LiPo batteries✅ Flexible 12 AWG silicone wire for high-current loads✅ Precision-soldered and heat-shrunk for durability✅ Ideal for compact packs used in 1/10 scale vehicles 📏 Length: ~300mm⚡ Wire Gauge: 12 AWG🔌 Connector A: XT60 Female🔌 Connector B: EC3 Male 💡 Boof Tip: EC3 is the go-to connector for mid-range setups—this lead makes charging easy, safe, and fast.

Read more less

Team Associated RC10B7 Top Shaft – Precision Replacement for Smooth Power Delivery! ⚙️ Keep your RC10B7 or RC10B7D drivetrain performing flawlessly with the Team Associated Top Shaft!This precision-machined replacement part is built to deliver smooth, reliable power transfer, helping maintain your buggy’s peak performance on race day. ✨ Key Features: ⚙️ Precision Machined Top Shaft – Ensures smooth and efficient drivetrain performance 🔧 Direct Replacement – Designed specifically for easy fitment in the RC10B7 and RC10B7D 🏁 Factory Team Reliability – Manufactured to meet Team Associated’s competition-grade standards 🛠️ Essential for Maintenance – Restore like-new drivetrain function after wear or damage 📦 Includes: ✔ (1) Top Shaft 📦 Compatibility: ✅ Team Associated RC10B7 ✅ Team Associated RC10B7D 📌 Note: 🔹 Use as a direct replacement for the stock top shaft.🔹 Recommended for racers looking to maintain drivetrain reliability and performance. 🏁 Maintain peak drivetrain efficiency with the Team Associated Top Shaft! 🔥 Smooth power, consistent performance — race ready with Factory Team precision!   

Read more less

JConcepts XRAY XB2 2024 "S15" Clear Buggy Body w/Two Wings High-Performance Shell for Elite-Level Racing Give your XRAY XB2 2024 the competitive edge with the JConcepts "S15" Buggy Body. Designed with precision for both the Carpet and Dirt versions of the XB2 2024, the S15 body blends aggressive styling with aerodynamic refinement for maximum performance. Mid-body winglets, a rear stabilizer kick-up, and the iconic “shark fin” cockpit spine enhance stability, steering response, and on-track handling. Whether you're running a tall shorty or the recommended saddle pack layout, the revised side-pods ensure proper clearance and a clean fit. Molded from clear polycarbonate, the S15 is ready for your paint scheme and includes everything you need to finish it off with professional results. ✨ Features: 💨 S15 Styling – Based on the popular Silencer body, tuned for XB2 2024 layout 🧭 Forward Cab Bias – Improves steering and directional stability 🛡️ Mid-Body Winglets – Add downforce and side bite for increased grip 🦈 Cockpit Shark Fin – Enhances high-speed tracking and body rigidity 🔧 Raised Rear Side-Pods – Accommodates multiple battery layouts 🪶 Available in Regular & Lightweight Versions (this version is standard) ✂️ Includes Window Mask & Decal Sheet 📦 Includes: ✔ (1) Clear S15 Body for XRAY XB2 2024✔ (2) Rear Wings✔ (1) Window Mask Sheet✔ (1) JConcepts Decal Sheet ✅ Compatibility: XRAY XB2 2024 Carpet Edition XRAY XB2 2024 Dirt Edition 🖌️ Note: Body comes clear and unpainted. Painted body shown for illustration purposes only.

Read more less

4 piece se 4.0  5.5 7.0 8.0     

Read more less

🔧 Stronger Steering. Sharper Response. Clean Upgrade. The Hot Racing Aluminum Servo Saver Set is a durable upgrade for Arrma Grom platforms, replacing the stock plastic saver with a more precise and reliable aluminum design. 🏁 About the Aluminum Servo Saver 🎯 Precision & Control CNC-machined for an accurate fit, this servo saver helps improve steering response and consistency—especially in demanding off-road conditions. 💪 Durable Upgrade Constructed from lightweight aluminum, it offers increased strength over stock plastic components while maintaining a clean, premium look. ⚠️ Servo Compatibility Note Designed specifically for 25T spline servos. This will NOT work with the stock Grom servo. 🔧 Key Features ✔ CNC-machined aluminum construction✔ Stronger than stock plastic parts✔ Lightweight design✔ Anodized finish for corrosion resistance✔ Improves steering response and durability✔ Designed for 25T spline servos 📦 Includes (1) Aluminum Servo Saver Set (25T) 🚗 Compatibility Arrma Granite Grom Arrma Mojave Grom Arrma Typhon Grom 🔧 Upgrade your steering. Tighten your control. Drive with confidence.    

Read more less

  🚗💨 Compact Size. Big Power. Built to Stunt. The Arrma Outcast 4S V2 BLX is a high-performance stunt truck designed for aggressive bashing, big air, and extreme durability. With major upgrades like a metal center differential, stronger chassis design, and Smart electronics, this truck delivers serious power and control in a compact 1/10 platform. 🏁 About the Outcast 4S V2 BLX 💪 Upgraded Durability The updated chassis features a center differential module, hinge pin bracing, and dirt drain design for easier maintenance and increased strength. Added protection like outdrive guards, taller side guards, and wishbone dirt shields help keep debris out and components protected. ⚡ Brushless Power System Equipped with a Spektrum Firma 120A Smart V2 ESC and 3668 2400kV brushless motor, the Outcast delivers strong acceleration, smooth power delivery, and cool-running performance on 3S–4S LiPo setups. 🎯 Built to Stunt A shorter 12.32" wheelbase makes wheelies, flips, and stunts easy, while the longer chassis and wide stance provide stability and control when things get wild. 🔧 Premium Components EXB all-metal gear differentials and CVD driveshafts ensure reliable power transfer, while aluminum oil-filled shocks and adjustable suspension components let you dial in performance. 🔧 Key Features ✔ Fully assembled Ready-To-Run (RTR)✔ Spektrum Firma 120A Smart V2 waterproof ESC✔ 3668 2400kV brushless motor✔ Metal center differential✔ EXB metal gear differentials✔ EXB CVD front and rear driveshafts✔ Spektrum S662 metal gear digital servo✔ Durable chassis with center support brace✔ Oil-filled aluminum shocks✔ Adjustable turnbuckles and ride height✔ 17mm wheel hexes 📦 Includes (1) Arrma Outcast 4S V2 BLX Stunt Truck (1) Spektrum SLT3 2.4GHz Transmitter (1) Spektrum SR315 Receiver (4) AA Batteries 🔋 Needed To Complete (1) 3S or 4S LiPo Battery (IC5 or EC5) Compatible Battery Charger 📊 Specifications Scale: 1:10 Drive: 4WD Length: 20.28in (515mm) Width: 17.72in (450mm) Wheelbase: 12.32in (313mm) Weight: 9.17lbs (4.17kg) Wheel Hex: 17mm Gear Pitch: 0.8 MOD Spur/Pinion: 57T / 13T Final Drive Ratio: 12.48 Input Voltage: 3S–4S LiPo 🎨 Available Colors Red Gunmetal 🚗💨 Flip it. Send it. Bash harder.

Read more less

The Sticky Kicks RC Five Star Detail Brush Sets are designed to keep your RC cars clean, detailed, and race-ready. Built with super-sturdy molded plastic handles and premium boars hair bristles, these brushes provide the perfect balance of stiffness and softness to remove dirt without damaging components. Available in Small (3-Piece) or Large (2-Piece) options, these brush sets make it easy to reach tight, hard-to-clean areas or quickly clean larger surfaces during routine maintenance or post-race cleanup. Product Details Premium boars hair bristles Stiff yet soft for safe, effective cleaning Durable molded plastic handles Reaches hard-to-clean areas Suitable for all size RC cars Ideal for pit use or shop maintenance Options Small Brush Set – (3) detail brushes for tight areas Large Brush Set – (2) larger brushes for broader coverage A must-have cleaning solution for keeping your cars looking sharp and #superdialed every race day. 🏁

Read more less

The 1UP Racing QuikShine RC Body Cleaner is a specially blended formula designed to keep your RC bodies looking fresh, clean, and race-ready. Tested and made in the USA, this low-odor cleaner is safe on polycarbonate while being tough on scuffs, dirt, ink marks, and paint overspray. Just apply a few drops to a lint-free towel and wipe away grime to bring your livery back to life—it’s that quick. Features & Benefits Designed specifically for RC car bodies Safe on polycarbonate Removes dirt, scuffs, ink, and overspray Low-odor formula Easy wipe-on application Made in the USA How to Use Apply a small amount to a lint-free towel Gently wipe the body surface Enjoy a clean, refreshed look in seconds IMPORTANT NOTE ⚠️ Do NOT use on: Painted surfaces Non-laminated decals Permanent marker This product will remove paint, decals, and marker if used on those surfaces. A must-have pit product for keeping your RC bodies clean and looking sharp between races. 🏁  

Read more less

The Racers Edge 11-Piece Complete Tool Set is a versatile, all-in-one kit designed for RC racers and hobbyists who want everything they need in one organized package. Featuring ergonomic 25mm composite handles, essential hex and nut drivers, cutting tools, and a durable storage case, this set is perfect for the track, pit table, or home bench. Features Ergonomic 25mm large lightweight composite handles High-grip design for comfort and control Covers common RC assembly, maintenance, and setup needs Organized storage with clear box and zipper transport case Includes 1 × Hex Wrench 1.5mm 1 × Hex Wrench 2.0mm 1 × Hex Wrench 2.5mm 1 × Hex Wrench 3.0mm 1 × Steel 5.5mm Nut Driver 1 × Steel 7mm Wheel Nut Driver 1 × Curved Lexan Scissors 1 × Sprue / Side / Tire Cutters 1 × Aluminum Hobby Knife w/ #11 Blade 1 × Turnbuckle Wrench (3.2, 4, 5, 5.5, 7 & 8mm) 1 × Cleaning Brush 1 × Clear Storage Box (245 × 175 × 38mm) Storage / Transport Zipper Case Specifications Overall Dimensions: 285 × 180 × 50mm A great all-around tool kit for beginners and experienced racers alike—perfect for keeping your pit setup clean, organized, and ready to race. 🏁

Read more less

The S15 body from JConcepts delivers world-class aerodynamics to the Losi 22X platform. Introduced on the IFMAR World Championship stage, the S15 continues a winning lineage inspired by the Punisher, Finnisher, and Silencer designs—engineered for racers who demand speed, stability, and style. About the S15 Buggy Body Refined Aerodynamics for Any SurfaceA centered single-cockpit layout with optimized deflection angles and signature chamfered side pods improves airflow and consistency through corners. The roof’s centerline fin enhances straight-line tracking and durability, while a rear spoiler extension adds downforce. Inside, a trimmable rear section helps vent heat from electronics. The result is a tight, gap-free fit that maximizes efficiency on dirt, carpet, and turf. Features IFMAR World Championship–winning S15 design Optimized deflection angles & side-pod winglets for improved airflow Centerline roof fin for tracking and crash durability Rear spoiler extension increases downforce Trimmable rear section for heat escape and customization Available in Standard or Lightweight thickness Includes (1) TLR 22X “S15” 1/10 Buggy Body (Clear) — 0709 or 0709L (2) Carpet/Turf/Dirt Wings (1) Decal Sheet (1) Window Masking Sheet Compatibility: Losi 22XTech Note: Painted body shown for illustration only. Product is clear and unpainted.    

Read more less

Upgrade your XRAY XB2 2025 with the world-championship-winning performance of the JConcepts S15. Originally debuted at the IFMAR World Championships, the S15 blends elements from the iconic Punisher, Finnisher, and Silencer lines to deliver razor-sharp handling, superior airflow balance, and a modern, aggressive look suited for today's high-grip tracks. This body offers a precise chassis-hugging fit, ample space for sponsor logos, and tuning flexibility with two included wings for carpet, turf, or dirt racing. Refined S15 Aerodynamics The S15 is engineered for efficiency and stability across demanding race conditions. Its centered cockpit, chamfered side pods, and aerodynamic window shaping help direct airflow cleanly over the buggy. A centerline fin enhances tracking accuracy, while the rear spoiler profile boosts downforce for improved cornering grip. A trimmable rear section allows heat escape from electronics, making this body both functional and competition-ready. Key Features Championship-proven S15 aero package Designed specifically for the XRAY XB2 2025 Optimized deflection angles for balanced airflow Chamfered side pods for signature JConcepts styling Centerline roof fin for increased straight-line stability Rear spoiler extension increases downforce Rear trimming area helps release heat Molded in clear polycarbonate with overspray protection Includes (1) JConcepts XRAY XB2 2025 S15 Clear Body (2) JConcepts Turf/Carpet/Dirt Wings (1) Decal Sheet (1) Window Masking Sheet Note Body ships clear and unpainted Painted body shown for illustration only

Read more less

A next-generation surface radio for drivers who want full control, deep customization, and open-source freedom.The RadioMaster MT12 is the first surface transmitter officially supported by EdgeTX, ExpressLRS, and the Multi-Module Project — making it one of the most versatile radios ever developed for RC cars, trucks, crawlers, boats, robotics, and more. With 10 physical inputs, up to 32 channels, and a fully modular RF design, the MT12 gives you the tools to build, tune, and control anything from mild to wild. ⚠️ Pre-Order Notice: First batch ships November 20th. 🚀 Why the MT12 Is a Game-Changer Official support for EdgeTX + ExpressLRS + Multi-Module Choose built-in 4-in-1 MPM or ExpressLRS Up to 32 channels for complex rigs* Hall-effect steering and throttle sensors Modular Nano-bay for external transmitters Oversized battery bay for 2×18650 or 2S 5000mAh LiPo USB-C fast charging (QC3.0 — 2A max) Compact, ergonomic, and highly customizable *32 channels requires 4-in-1 version + external module + compatible receivers 🧠 Open-Source Power EdgeTX installed out of the box Deep programming, mixes, and logic options Fully user-tunable behavior and controls Save, backup, and share model profiles Firmware upgrades via USB-C or SD card This is the radio for drivers who want control without limitations. 📐 MT12 Specifications Dimensions: 177.8 × 118.4 × 207.8 mmWeight: 480gOperating Frequency: 2.400–2.480GHzInternal RF Module: 4-in-1 Multi-ProtocolChannels: 16 standard, up to 32*Current Draw: 160mA (4-in-1)Voltage: DC 6.6–8.4VDisplay: 128×64 mono LCDSensors: Hall-effect steering + triggerModule Bay: Nano sizeCharging: USB-C (built-in)Batteries: 2×18650 or 2S 7.4V (not included) 📦 What’s Included (1) RadioMaster MT12 Surface Transmitter (1) R85C 5-Channel Receiver Manual + Accessories 📡 R85C Receiver (Included) FrSky D8 / D16 + Futaba SFHSS compatible 5-channel PWM output Built-in TCXO for frequency stability High-sensitivity 2.4GHz antenna Weight: 5.7g Size: 31×18.5×13 mm Voltage: 4.5–8.4V Telemetry: 100mW Perfect for small RC builds, crawlers, boats, robotics, and DIY projects. 🏁 Who It’s For The MT12 is ideal for: RC crawlers & scale rigs Racing & bashers Boats Robotics & mechatronics Multi-servo custom builds Engineering projects Experimental vehicles Anything unusual, wild, or complex If your project needs more inputs, more channels, and more customization, this is the next-level radio you’ve been waiting for. ⭐ Why Drivers Love It Endless flexibility Ultra-precise inputs Modular RF ecosystem Incredible value for features Community-driven development This is not just another surface radio — it’s a platform. 🔋 Battery Options 2× 18650 Li-ion cells, or 2S 7.4V 5000mAh pack Batteries NOT included 🧰 Expandability Works with: RadioMaster Ranger Nano RM 4-in-1 External Module TBS Crossfire Nano ExpressLRS modules Multi-protocol receivers SBUS, PWM, PPM, CRSF, and more (module dependent) Flight-radio-tier flexibility in a surface-focused form factor. 🎯 Summary Powerful. Open-source. Modular. Future-proof. The RadioMaster MT12 sets a new standard for surface radios with unmatched customization, expandability, and controller feel — ready to drive anything you can imagine.  

Read more less

4S Power. Pro Scale Realism. Ultimate Performance.The Traxxas Ford Raptor R 4x4 Ultimate VXL delivers the perfect blend of scale detail and insane brushless speed. Pushing over 60+ mph on 4S power, this fully-upgraded truck comes loaded with more than $550 in premium performance parts, including aluminum suspension, heavy-duty steel driveline, and advanced telemetry for the ultimate out-of-box experience. With its officially licensed Ford F-150 Raptor R™ Pro Scale® body, integrated LED lighting, and clipless body-mount system, this truck looks every bit as serious as it drives. Beneath the body, a reinforced chassis and the Velineon® VXL-4S system unleash massive torque and blistering acceleration backed by Traxxas Stability Management® (TSM) for confident control on any surface. 🦾 Performance & Design Highlights Velineon VXL-4S brushless system – 60+ mph speed capability Massive 540XL motor with sensorless torque & efficiency Officially licensed Ford Raptor R™ body with molded bumpers, grille, hood vents, mirrors & LED lights Clipless body mounting system – clean, fast, secure Full-time shaft-driven 4WD with center differential (20M oil) Steel-gear differentials and Maxx-duty driveshafts for unmatched durability Aluminum GTR shocks with TiN-coated shafts and adjustable spring collars Color-matched aluminum C-hubs, steering blocks & rear carriers Heavy-duty modular chassis design with reinforced shock towers and side protection TQi™ 2.4 GHz radio system with Traxxas Link & telemetry compatibility Waterproof electronics with Traxxas Stability Management (TSM) ⚙️ Specifications Spec Detail Scale 1/10 Drive System 4WD – Shaft Driven Power Source 2S – 4S LiPo Length 25.08 in (637 mm) Wheelbase 15.12 in (384 mm) Width 11.38 in (289 mm) Height 8.9 in (226 mm) Weight 105.92 oz (3003 g) Motor Velineon 540XL Brushless (Sensorless) ESC VXL-4S Brushless (Sensorless) Connector Traxxas iD® Servo Standard High-Torque Tires BFGoodrich® All-Terrain T/A KO2 (Front & Rear) Wheels 3 in Front / 3 in Rear Assembly Level RTR – Ready to Run 📦 Includes (1) Ford Raptor R 4x4 Ultimate VXL RTR Truck (1) Pre-painted Fox Edition Body (Black / Orange / Gold) (1) TQi™ 2.4 GHz Radio System with Wireless Module Factory-installed LED lighting (front & rear) High-quality maintenance tools 🔋 Needed to Complete (1) 2S, 3S, or 4S LiPo battery (7.4–14.8 V) with Traxxas iD® connector (1) Compatible Traxxas iD charger (4) AA batteries for the transmitter  

Read more less

Precision. Strength. Performance.Keep your Team Associated short course or stadium truck performing at its best with these Rear Suspension Arms (71105). Designed for precise geometry and rugged durability, they deliver consistent handling and reliability on the track or in the dirt. Factory Fit. Race Proven.These genuine Team Associated replacement arms fit both left and right sides and are molded from high-strength composite for balanced flex and long-lasting performance. Ideal for racers and bashers alike looking to restore factory handling and suspension response. 💪 Features: Genuine Team Associated replacement parts High-strength composite material for durability and consistent flex Factory geometry for precise suspension movement Direct fit for multiple RC10 platforms Includes left and right arms 📦 Includes: (1) Left Rear Suspension Arm (1) Right Rear Suspension Arm ✅ Compatibility: Team Associated RC10 SC6.1 Team Associated RC10 SC6.2 Team Associated RC10 T6.1  

Read more less

The Kyosho MR-04 Mini-Z RWD ReadySet with the officially licensed McLaren 12C GT3 2013 Orange body delivers big performance in a compact package. Featuring the advanced MR-04 chassis and a KT-531P 2.4GHz transmitter, this ReadySet is fully assembled and ready to run. With its lower center of gravity, refined suspension, and sharper steering system, the MR-04 provides smooth, precise handling for both new drivers and competitive racers. ⚡ Features: Officially licensed McLaren 12C GT3 2013 body (Orange) Advanced MR-04 chassis with improved stability and handling Perfex KT-531P 2.4GHz radio included Refined suspension system for maximum grip Updated steering knuckles with integrated kingpins for sharper control Full ball bearing drivetrain for efficiency Rear suspension coil spring damper (oil shock upgrade optional) Geared differential for smooth cornering Compatible with optional gyro unit (KYOMZW711 – sold separately) Pre-painted, highly detailed body with scale realism 📦 Includes: (1) Factory Assembled MR-04 Chassis (1) Pre-Painted McLaren 12C GT3 2013 Body (Orange) (1) Perfex KT-531P 2.4GHz Transmitter (1) Front Tread Adjustment Parts Set (4) Pinion Gears (6T, 7T, 8T, 9T) (1) Pinion Gear Tool (1) Wheel Wrench Product Manual 🔧 Needed To Complete: (4) AAA batteries for transmitter (4) AAA batteries for chassis 📏 Specifications: Scale: Mini-Z Drive: RWD Power: Electric (brushed motor/ESC included) Length: 177mm (6.9") Wheelbase: 98mm (3.8") LL Width: 76.5mm (3.01") Height: 45mm (1.77") Weight: 165g (5.8oz) Part #: 32366OR

Read more less

Traxxas Unlimited Desert Racer® 6S RTR 4WD Race Truck w/LED Lights – 85086-4🏁 1/7 Scale Trophy Truck Realism. 6S Brushless Power. Pure Adrenaline. 💨Available in: Rigid Industries or FOX® Racing Livery Built for performance, designed for realism — the Traxxas Unlimited Desert Racer (UDR) brings scale off-road racing to life like never before. Powered by a VXL-6s brushless system and loaded with Pro-Scale® details, the UDR hits speeds over 50+ MPH while looking exactly like a real desert trophy truck doing it. With dual spare tires, driver figures, a detailed interior, and a factory-installed LED light system, this is the ultimate combination of scale and power. ⚙️ Key Features: 💥 VXL-6s Brushless Power System w/ 2200kV Motor 🛞 Pro-Scale Realism: Tube chassis, fire extinguishers, jack, and more 🚦 Factory-Installed LED Lights: Front, roof, and tail with brake lights 🛠️ Realistic Suspension: Front independent arms + 4-link solid rear axle 🧰 Clipless Body Mounting for Quick Battery Access 🧭 TQi 2.4GHz Radio System w/ TSM® Stability Control 🔗 Heavy-duty steel driveline & aluminum GTR shocks 🧱 Realistic Sidewalls & Functional Limit Straps 📦 What’s Included: (1) Traxxas UDR 6S 4WD Desert Truck (1) Velineon® VXL-6s ESC + 2200kV Motor (1) TQi™ 2.4GHz Radio System (1) Full Pro-Scale LED Light Kit (1) High-Quality Tool Set (1) Product Manual 🔋 Required to Complete: (1) 4S LiPo Battery or (2) 2S LiPo Batteries or (2) 3S LiPo Batteries (1) Compatible Charger (4) AA Batteries for Transmitter 📐 Specifications: Scale: 1/7 Drive: 4WD Length: 27.32 in (694mm) Wheelbase: 16.53 in (420mm) Width: 13.57 in (345mm) Height: 10.29 in (261mm) Weight: 214.4 oz (6,078 g) Motor: Velineon 2200kV ESC: VXL-6s Waterproof Servo: 2075R High Torque Connector: Traxxas Wheels/Tires: BFGoodrich® KR3 w/ 17mm hex 🚙 Realistic scale. Savage power. The Unlimited Desert Racer is ready to conquer anything in its path.💡 Add Traxxas Link™ Wireless Module (TRA6511) for full lighting and telemetry control.

Read more less

⚡ Hot Racing Arrma Granite Grom Aluminum Front Upper Arm Set (Black) ⚡💪 Stronger, Sleeker, and Built to Perform! 💪 Upgrade your Arrma Granite Grom with the Hot Racing Aluminum Front Upper Arm Set! Engineered for strength, precision, and style, these CNC-machined aluminum arms bring next-level durability and performance to your 1/18 4WD Monster Truck. 🏆💥 Designed to handle the roughest terrains and biggest jumps, the anodized black finish not only adds a sleek look but also protects against corrosion — so you can bash harder, longer, and in any weather. 🌧️☀️ ✅ Key Features: ✨ High-Quality Aluminum Construction – Stronger & tougher than stock🛠️ Enhanced Durability & Rigidity – For better handling & stability⚡ Anodized Finish – Sleek look + corrosion resistance🔩 Precision-Engineered Fit – Easy install & perfect alignment🔧 Pre-Installed Steel Pivot Balls – Ready to drop in 📦 Includes: ✔️ (1) Left Front Upper Arm✔️ (1) Right Front Upper Arm✔️ (2) Pre-Installed Steel Pivot Balls 🔗 Compatibility: 🔸 Arrma Granite Grom

Read more less

⚡ Hot Racing Arrma Granite Grom Aluminum Front Lower Arm Set (Black) ⚡💪 Unmatched Strength & Stability for Your Grom! 💪 Take your Arrma Granite Grom to the next level with the Hot Racing Aluminum Front Lower Arm Set! Built for hardcore bashers, these CNC-machined aluminum arms add serious strength, stability, and style to your 1/18 4WD Monster Truck. 🏆💥 Tackle rough terrain and massive jumps with confidence. The anodized black finish not only gives your rig a sleek, aggressive look but also offers corrosion resistance for all-weather durability. 🌧️☀️ ✅ Key Features: ✨ High-Quality Aluminum Construction – Stronger & tougher than stock🛠️ Enhanced Durability & Rigidity – For superior handling & control⚡ Anodized Finish – Corrosion-resistant with a sleek, pro look🔩 Precision-Engineered Fit – Easy installation & perfect alignment🔧 Pre-Installed Steel Pivot Balls & Mounting Screws – Ready to bash! 📦 Includes: ✔️ (1) Left Front Lower Arm✔️ (1) Right Front Lower Arm✔️ (2) Pre-Installed Steel Pivot Balls✔️ (2) Mounting Screws 🔗 Compatibility: 🔸 Arrma Granite Grom

Read more less

Team Associated RC10 40th Anniversary 1/10 Electric 2WD Buggy Kit (Green) – Limited Edition! 🔥 A Tribute to Racing Heritage with Modern Performance! 🚗💨 The Team Associated RC10 40th Anniversary 1/10 Electric 2WD Buggy Kit is a limited-edition celebration of the legendary RC10, honoring its groundbreaking legacy in off-road racing. Designed to commemorate both Team Associated's 60th anniversary and the 40th anniversary of the original RC10, this premium race-inspired kit blends classic engineering with modern performance enhancements. 🏆 Featuring a durable aluminum alloy monocoque chassis, fully adjustable suspension, VariLok differential, and long-throw fluid-filled shocks, this race-bred 2WD buggy is built for competitive racing and RC enthusiasts who appreciate precision handling and historical excellence. ✨ Key Features: 🛠️ Aluminum Alloy Monocoque Chassis – Strong, lightweight, and race-proven 🔥 Fully Adjustable Independent Suspension – Optimized for high-speed off-road handling ⚙️ VariLok Adjustable Differential – Delivers consistent traction & power distribution 💨 Long-Throw, Fluid-Filled Racing Shocks – Smooth suspension response for superior control 🏎️ Low Center of Gravity Design – Improves stability & cornering performance 🔩 Precision A-Arm & Ball Joint Suspension – Allows fine-tuning of camber, caster, ride height, and spring rate 🛞 Modular Three-Piece Clamping Wheels – Lightweight & easy to maintain 🔋 Compatible with 6-Cell NiMH & 2S LiPo Batteries – Versatile power options for different racing styles 🎨 Clear Body for Custom Paint Jobs – Personalize your RC10 with your own race colors 🔧 Designed for Easy Assembly & Maintenance – Perfect for builders and competitive racers 📦 What’s in the Box? (1) Team Associated RC10 40th Anniversary 1/10 Electric 2WD Buggy Kit (2) Front Wheels & Tires (2) Rear Wheels & Tires (1) Clear Body 📖 Product Manual 📌 Note: This is a KIT and requires assembly. Electronics and additional components must be purchased separately. 📊 Specifications: Scale: 1/10 Drive: 2WD Power Source: 2S LiPo / 6-Cell NiMH Length: 15 in (381mm) Wheelbase: 10.54 in (267.7mm) Width: 8.93 in (226.8mm) Assembly Level: Kit ⚡ Needed to Complete: (1) 2-Channel Transmitter & Receiver (1) 540-Size Motor (1) 1/10 Electronic Speed Controller (ESC) (1) 1/10 Steering Servo (1) Pinion Gear (1) 6-Cell NiMH or 2S LiPo Battery (1) Compatible Battery Charger (4) AA Batteries for Transmitter Polycarbonate Paint for Body 🏁 Own a Piece of RC Racing History! 🔥 Whether you're a collector, racer, or long-time Team Associated fan, the RC10 40th Anniversary Edition delivers legendary performance, nostalgic design, and championship-winning engineering. 💨 Build your legacy—own the RC10 40th Anniversary Edition today! 🏆🏁

Read more less

Team Associated RC10B7/B7D Factory Team Steering Bellcrank & Rack Set (Carbon) – Strength, Precision, and Performance! 🛞 Upgrade your steering system with the Team Associated Factory Team Carbon Bellcrank & Rack Set for the RC10B7 and RC10B7D!Molded from performance-proven carbon composite, this optional set provides enhanced durability and improved steering precision, while maintaining just the right amount of flex for maximum handling performance on the track. ✨ Key Features: 🛞 Carbon Composite Construction – Stronger than stock parts while retaining necessary flex for superior handling 🔧 Complete Steering System Upgrade – Includes the steering rack and both bellcrank arms/horns 🏁 Increased Durability – Withstands the rigors of intense racing without sacrificing steering response 🛡️ Factory Team Performance – Designed by Team Associated for top-level competition 📦 Includes: ✔ (1) Carbon Composite Steering Rack ✔ (2) Carbon Composite Bellcrank Arms/Horns 📦 Compatibility: ✅ Team Associated RC10B7 ✅ Team Associated RC10B7D 📌 Note: 🔹 Direct fit for RC10B7 and B7D chassis.🔹 Recommended for racers seeking improved strength and optimized steering feel. 🏁 Unlock sharper, more durable steering performance with the Factory Team Carbon Bellcrank & Rack Set! 🔥 Install it today and feel the Factory Team advantage with your Team Associated RC10B7 or RC10B7D! 🔥

Read more less

Team Associated RC10B7 Factory Team Carbon Fiber Front Wing Button – Lightweight Strength with Factory Style! 🛞 Upgrade your RC10B7 or RC10B7D’s aerodynamics and appearance with the Team Associated Factory Team Carbon Fiber Front Wing Button!Crafted from premium carbon fiber, this lightweight yet durable wing button provides a secure hold for your front wing, enhancing stability, reducing weight, and giving your buggy a true Factory Team look. ✨ Key Features: 🛞 High-Quality Carbon Fiber Construction – Combines lightweight performance with exceptional strength 🔧 Secure Front Wing Mounting – Keeps your wing firmly in place for consistent aerodynamics 💨 Reduces Overall Vehicle Weight – Shaves grams without compromising durability 🏁 Precision Fit for Factory Team Performance – Designed specifically for the RC10B7 and RC10B7D platforms 🎨 Sleek Factory Team Appearance – Adds a professional, race-ready finish to your setup 📦 Includes: ✔ (1) Factory Team Carbon Fiber Front Wing Button 📦 Compatibility: ✅ Team Associated RC10B7 ✅ Team Associated RC10B7D 📌 Note: 🔹 Direct replacement for stock plastic wing buttons.🔹 Use with standard RC10B7 wing mounting hardware. 🏁 Upgrade to Factory Team precision with the lightweight Carbon Fiber Front Wing Button! 🔥 Secure your wing, lower your weight, and race with style — Team Associated Factory Team quality you can trust! 🔥

Read more less

Team Associated RC10B7 Factory Team Aluminum Pivot Ball Set – Lightweight Precision for Peak Performance! ⚙️ Enhance your buggy’s handling and responsiveness with the Team Associated Factory Team Aluminum Pivot Ball Set for the RC10B7 and RC10B7D!Made from high-strength 7075 aluminum, these pivot balls are engineered to reduce unsprung weight while maintaining maximum durability, giving you a noticeable edge on the track. ✨ Key Features: ⚙️ 7075 Aluminum Construction – Combines strength with lightweight performance for competitive racing 🛡️ Hard-Anodized Finish – Improves wear resistance and ensures long-lasting durability 🪶 3.2-Gram Weight Reduction – Lighter than stock steel pivot balls for quicker acceleration and sharper handling 🔧 Precision Machining – Ensures a smooth, consistent fit and performance 🏁 Optimized for Track Conditions – Reduces unsprung weight to boost agility and responsiveness 📦 Includes: ✔ (1) Factory Team Aluminum Pivot Ball Set 📦 Compatibility: ✅ Team Associated RC10B7 ✅ Team Associated RC10B7D 📌 Note: 🔹 Direct replacement for stock pivot balls.🔹 Highly recommended for racers looking to fine-tune weight distribution and improve overall vehicle dynamics. 🏁 Race lighter, stronger, and faster with the Factory Team Aluminum Pivot Ball Set! 🔥 Experience superior handling and durability with Team Associated Factory Team quality! 🔥  

Read more less

Team Associated RC10B7 6.5mm Aluminum Front Axles (2) – Lightweight Strength for Precision Racing! 🔩 Refresh your buggy’s front-end performance with the Team Associated RC10B7 6.5mm Aluminum Front Axles!Designed as a direct replacement for the RC10B7, these lightweight aluminum axles reduce rotating mass for quicker acceleration and sharper handling without sacrificing durability. ✨ Key Features: 🔩 Lightweight 6.5mm Aluminum Construction – Reduces unsprung weight for faster response and improved handling 🏁 Direct Replacement Design – Perfect fit for Team Associated RC10B7 🛡️ Durable and Race-Ready – Built to withstand the rigors of competitive off-road racing 🔧 Precision Machined – Ensures smooth performance and proper fit with your hubs and bearings 📦 Includes: ✔ (2) 6.5mm Aluminum Front Axles 📦 Compatibility: ✅ Team Associated RC10B7 ✅ Team Associated RC10B7D ✅ Team Associated DC10 Drift Car 📌 Note: 🔹 Use with standard RC10B7 hub assemblies.🔹 A great upgrade for racers looking to shave weight and enhance steering precision. 🏁 Boost your buggy’s front-end performance with the Factory Team Aluminum Front Axles! 🔥 Race lighter and faster with the quality you expect from Team Associated! 🔥

Read more less

🛠️ Traxxas Steel Wide-Face Mod 1.0 Spur Gear (46T / 50T / 54T) — Heavy-Duty Performance! Upgrade your drivetrain with Traxxas Steel Wide-Face Spur Gears, available in 46T, 50T, or 54T tooth options. Designed for maximum durability and load handling, these heavy-duty steel gears are perfect for high-torque setups, big power, and extreme bashing. ⚙️ Available Variants: 46 Tooth 50 Tooth 54 Tooth 🔩 Why Choose Steel? ✅ Wider face for increased tooth engagement ✅ Hardened steel construction for ultimate durability ✅ Perfect for high power brushless systems and intense terrain 🔧 Gear Change Effects: Spur Gear Size Effect Larger Spur (Higher T) 🔹 More acceleration 🔹 Lower top speed 🔹 Best for short, technical tracks or heavy loads Smaller Spur (Lower T) 🔹 Smoother, slower take-off 🔹 More top speed 🔹 Ideal for open tracks and speed runs ✅ Compatible With: Traxxas Maxx Traxxas X-Maxx Traxxas XRT 📦 Includes: (1) Traxxas Steel Wide-Face Spur Gear in your selected size (46T, 50T, or 54T) 🌀 Need extreme strength and tuning flexibility? Steel is the way to go. Gear up your Maxx, X-Maxx, or XRT for whatever the track throws your way!

Read more less

Traxxas X-Maxx 8S 1/6 4WD Brushless RTR Monster Truck (Blue, Green, Orange, or Red) – w/ TQi Radio, TSM & Belted Tires 📈 OVER 50MPH. FULL 8S POWER. UNREAL DURABILITY. Get ready to unleash one of the most powerful monster trucks ever created! The Traxxas X-Maxx 8S RTR tears through terrain with over 50mph speed, belt-reinforced Sledgehammer tires, and all-metal drivetrain strength. Whether you're racing, bashing, or dominating backyard trails, this beast delivers jaw-dropping action straight out of the box. 🔥 Key Features: 🛞 8S Belted Sledgehammer Tires – High-speed stability and grip 💪 VXL-8S Brushless Power System – Over 50+ MPH with optional spur gear ⚙️ Full Metal Drivetrain & CVDs – Built for extreme abuse 🛡️ Clipless Reinforced Body – Easy on/off + added durability 🔧 GTX Aluminum Shocks – Massive damping for rough terrain 🧠 Traxxas Stability Management (TSM) – Driver-assist technology for max control 📡 TQi 2.4GHz Radio System – Real-time telemetry capable (via optional Link module) ❄️ Dual Cooling Fans & Heat Sink – Keep temps low, even when pushing limits 🎨 Available Colors: Blue Green Orange Red 📦 What's In The Box: (1) Traxxas X-Maxx 8S RTR Monster Truck (Color of your choice) (1) TQi 2.4GHz Transmitter with TSM (1) Product Manual 🔋 Needed to Complete: (2) Traxxas 4S LiPo Batteries w/ iD Connector (1) Compatible Traxxas iD Charger (4) AA Batteries for Transmitter ✅ Recommended Add-Ons: EZ-Peak Live Dual iD Charger w/ (2) 4S 6700mAh LiPo Batteries 📐 Specs: Scale: 1/6 Length: 30.67" (779mm) Width: 21.3" (540mm) Height: 13.79" (350mm) Wheelbase: 18.92" (480mm) Weight: 19.1 lbs (8.66kg) Ground Clearance: 4" (102mm) Wheel Hex: 24mm splined Power Source: Electric Input Voltage: 6S–8S LiPo (22.2–29.6V) Completion Level: Ready-To-Run (RTR) 💣 Dominate anything in your path. The X-Maxx isn’t just a monster—it's the monster.🚀 Built to bash. Engineered for power. Made by Traxxas.

Read more less

JConcepts XRAY XB2 2024 "S15" Lightweight Clear Buggy Body w/Two Wings Premium Lightweight Option for Maximum Performance Dominate the track with the lightweight version of the JConcepts "S15" Buggy Body, precision-molded for the XRAY XB2 2024 Carpet and Dirt platforms. This body features the same aerodynamic enhancements and aggressive styling as the standard S15 — now in a thinner polycarbonate for reduced weight and sharper handling. Mid-body winglets, a cockpit shark fin, and a raised rear profile give your buggy the downforce, stability, and fitment needed to perform at its peak. Ideal for racers chasing every last tenth of a second, the lightweight S15 is a go-to choice for competitive events where agility and response matter most. ✨ Features: 💨 Lightweight Polycarbonate Construction – Reduces overall weight for quicker response and better rotation 🧭 Forward Cab Bias – Enhances steering feel and directional control 🛡️ Mid-Body Winglets & Stabilizer Kick-Up – Adds side bite and rear grip 🦈 Cockpit Shark Fin – Improves high-speed stability and structural integrity 🧰 Raised Rear Side-Pods – Fits tall shorty packs or saddle pack layout ✂️ Includes Window Mask & Decal Sheet 📦 Includes: ✔ (1) Lightweight Clear S15 Body for XRAY XB2 2024✔ (2) Rear Wings✔ (1) Window Mask Sheet✔ (1) JConcepts Decal Sheet ✅ Compatibility: XRAY XB2 2024 Carpet Edition XRAY XB2 2024 Dirt Edition 🖌️ Note: Body comes clear and unpainted. Painted image is for reference only.

Read more less

JConcepts F2 Lightweight Body for XRAY XB2 2024 – Includes Two 6.5" Wings🏁 Lighten Up and Stay Fast – Proven Aero for High-Grip Racing The JConcepts F2 lightweight body for the XRAY XB2 2024 is built for serious racers looking to reduce weight and gain responsiveness on high-bite surfaces like turf, carpet, and polished clay. Based on the same winning layout as the standard F2, this lightweight version trims the fat while keeping all the performance you expect from a JConcepts shell. Featuring the signature forward cab bias, dual rear windows, and Finnisher "V" side-pod design, the F2 body offers maximum downforce, clean airflow, and high-speed stability. The slim profile hugs the XB2 2024 chassis perfectly, with built-in clearance for spur gear guards and space for electronics and wiring. ✨ Key Features: Direct fit for the XRAY XB2 2024 platform Clear lightweight polycarbonate for reduced weight and snappier handling Original JConcepts F2 profile with aggressive styling and aero balance Dual step side-pods and cab-forward layout for optimal steering response Includes (2) 6.5" Carpet | Turf | Dirt Wings Spur gear guard clearance molded into the body Comes with window masks and full decal sheet 📦 Includes: (1) F2 Clear Lightweight Body for XRAY XB2 2024 (2) 6.5" Wings (1) Window Mask Sheet (1) JConcepts Decal Sheet ⚠️ Note: Painted body shown for illustrative purposes only. Product ships clear and untrimmed. Compatibility: XRAY XB2 2024 Carpet XRAY XB2 2024 Dirt

Read more less

JConcepts F2 Standard Body for XRAY XB4 2024 – Includes Two 6.5" Wings🏁 Championship Aero Performance for Modern 4WD Racing The JConcepts F2 Standard Body for the XRAY XB4 2024 delivers a proven aerodynamic profile built for serious performance on dirt, carpet, and turf. Born from the IFMAR World Championship-winning design, this F2 body features a forward cab bias, louvered roof, and Finnisher “V” side-pod shaping — all blended for unmatched steering response and high-speed stability. Designed to hug the XRAY XB4 2024 chassis with precision, this body maintains a tight profile while allowing room for varied battery positioning, motor clearance, and front bulkhead geometry. The double-step side-pods, extended rear mounting ledge, and chamfered contours provide a clean fit with standout style. ✨ Key Features: Direct fit for XRAY XB4 2024 Clear polycarbonate in standard thickness Forward cab bias for aggressive steering and balance Louvered roof and rear windows improve cooling and rigidity Finnisher-style side-pod and roof contouring for unique aero feel Built-in room for electronics and drivetrain layout Includes (2) 6.5" Carpet | Turf | Dirt Wings Window masks and JConcepts decal sheet included 📦 Includes: (1) Clear Standard Weight F2 Body for XRAY XB4 2024 (2) 6.5" Wings (1) Window Mask Sheet (1) JConcepts Decal Sheet ⚠️ Note: Product ships clear and uncut. Painted body shown for illustration only. Compatibility: • • XRAY XB4 2024

Read more less