Arrma Typhon Grom Composite Chassis (200mm) Direct Replacement Chassis for 1/14 Typhon Grom This composite chassis is a genuine Arrma replacement part, designed to match the stock 200mm wheelbase configuration. Made from tough composite materials and reinforced in high-stress areas, it ensures long-lasting durability and a precise fit for your Typhon Grom buggy. Features: ✅ Durable Composite Material – Built to handle rough terrain and high-impact action.✅ Precision Manufactured – Ensures a secure and reliable fit.✅ Reinforced High-Stress Areas – Extra material added where it’s needed most.✅ Integrated Lower Gearbox Housing & Suspension Mounts – Maintains the structural integrity of your buggy. Includes: 📦 (1) Composite Chassis - 200mm Wheelbase Compatibility: ✔ 1/14 Typhon Grom 223S DSC 4X4 RTR Brushless Buggy (ARA2306 & ARA2306S)✔ 1/14 Typhon Grom 4X4 RTR Brushed Buggy (ARA2106) Restore your Typhon Grom to peak condition with this high-quality replacement chassis! 🏎️💨  

Read more less

Team Associated RC10B7 HD Gear Differential Outdrives (2) – Built Tough for Maximum Power Transfer! ⚙️ Maintain your RC10B7 or RC10B7D’s drivetrain strength with the Team Associated Factory Team HD Gear Differential Outdrives!These heavy-duty outdrives are designed to handle the intense loads of competitive racing, ensuring your buggy stays durable and consistent under extreme conditions. ✨ Key Features: ⚙️ Heavy-Duty Construction – Engineered to handle the rigors of intense 1/10 scale racing 🔧 Direct Replacement Design – Perfect fit for the Team Associated RC10B7 and B7D gear differentials 🏁 Improved Durability – Strengthens the drivetrain for better long-term performance 🛡️ Trusted Factory Team Quality – Race-proven reliability from Team Associated 📦 Includes: ✔ (2) Heavy-Duty Gear Differential Outdrives 📦 Compatibility: ✅ Team Associated RC10B7 ✅ Team Associated RC10B7D 📌 Note: 🔹 Direct fit for stock RC10B7 and B7D differentials.🔹 Ideal for racers looking to enhance drivetrain longevity and consistency under high loads. 🏁 Drive harder and push your limits with the Factory Team HD Gear Differential Outdrives! 🔥 Upgrade today for maximum durability on race day with Team Associated! 🔥  

Read more less

1up Racing Shock & Diff Oil Carrier Bag – Trackside Tuning, Organized 🎯 Keep your oils organized and protected with the 1up Racing Shock & Diff Oil Carrier Bag — the perfect solution for racers who bring the whole tuning bench to the track. Designed to fit 12 bottles of 1up Racing Pure Silicone Oils, this carrier keeps your setup clean, efficient, and ready for any condition. 💼 Featuring rigid, oil-resistant internal dividers and a durable zip-up enclosure, this bag is built to take spills, bumps, and race day chaos in stride. A woven carry handle and bold 1up Racing logo complete the look, making this the go-to organizer for serious racers. ✨ Key Features: 🧴 12 Dedicated Bottle Slots – Fits 41x41x105mm bottles like a glove🧽 Rigid Oil-Resistant Dividers – Won’t break down or absorb spills🧵 Zipper Enclosure – Securely seals your oils for transport🪢 Woven Carry Handle – Easy grab-and-go for race day🔥 Signature 1up Racing Look – Clean and professional trackside presence 📏 Dimensions: Individual Slots: 41mm x 41mm x 105mm\ Overall Bag Size: 22 x 17 x 12cm 🧰 Stay Dialed In – Wherever You Race From shock tuning to diff balancing, this carrier keeps your essential fluids safe, sorted, and spill-proof. No more mess. No more guesswork. 💡 Stay Race-Ready – Grab the 1up Oil Carrier Bag Today!

Read more less

Small Scale Powerhouse for Full-Throttle Bashing Fun The Arrma® Gorgon Grom 4x4 1/16 RTR Brushed Monster Truck brings unstoppable monster truck performance to a compact, ready-to-run size. Designed for both new drivers and seasoned bashers, this small-scale powerhouse combines durability, agility, and convenience — just charge, power on, and unleash the fun! 🔋 About the Gorgon Grom Advanced Electronics Equipped with Spektrum™ SLT2 2.4GHz Radio System for precise, interference-free control Spektrum SLT 25A Brushed ESC/Receiver Combo manages smooth power delivery from the 380-size brushed motor Spektrum SX110 metal-gear servo provides accurate, dependable steering response Water-resistant electronics for worry-free all-weather driving Beginner-friendly controls with adjustable throttle limits for learning at your own pace Suspension & Drivetrain Fully enclosed metal-gear 4WD drivetrain for efficient power transfer and reliability Independent suspension with oil-filled coil-over shocks for smooth handling on any surface Reinforced composite chassis designed to handle big jumps and rough landings Adjustable ride height for optimal performance across varied terrain Impact-absorbing front and rear bumpers keep the truck protected during extreme action Body & Tires Sleek monster truck body with clipless mounting system — no body clips to lose! High-traction dBoots Chevron MT tires provide maximum grip on dirt, gravel, or pavement Color-matched wheels and shock springs for aggressive looks and easy visibility Dual-catch battery tray ensures secure fit and quick battery swaps Compact design allows for tight cornering and responsive control in smaller spaces 🧩 Key Features ✅ 4WD drivetrain for all-terrain domination✅ Durable composite chassis with adjustable ride height✅ Clipless body system for quick battery access✅ Independent suspension with oil-filled shocks✅ Spektrum SLT2 radio with beginner settings✅ Smart G2 LiPo battery & USB-C charger included✅ Available in Yellow, Red, or Bronze color schemes 📦 In the Box (1) Gorgon Grom 4x4 1/16 RTR Monster Truck (1) Spektrum SLT2 2.4GHz Transmitter (1) Spektrum SLT 25A ESC/Receiver Combo (IC2) (1) 380-Size Brushed Motor (1) Spektrum SX110 Metal-Gear Servo (1) Spektrum Smart 2S 7.4V 1400mAh 30C LiPo Battery (1) Spektrum S10 Smart G2 Mini 2S USB-C Charger (4) AA Batteries for Transmitter (1) Hex Wrench & Product Manual 🔋 Needed to Complete (1) USB-C Power Adapter 📐 Specifications Spec Value Scale 1:16 Drive 4WD Power Source 2S LiPo (7.4V) Length 10.83" (275mm) Width 8.46" (215mm) Height 5.43" (138mm) Wheelbase 6.85" (174mm) Weight 36.32oz (1029.66g) Motor 380 Brushed ESC Spektrum SLT 25A Connector IC2 Servo Spektrum SX110 Metal Gear Tires dBoots Chevron MT Hex Size 12mm Assembly Level Ready-to-Run (RTR) 💥 Compact Size. Big Attitude. The Arrma Gorgon Grom 4x4 RTR proves that small-scale doesn’t mean small fun. With full 4WD traction, durable design, and punchy power, this mighty mini monster truck is ready for backyard jumps, parking lot races, and all-out bashing — anytime, anywhere.    

Read more less

Maximize efficiency and longevity with the Team Associated RC10B7 Factory Team Bearing Set. Featuring high-quality sealed bearings, this upgrade reduces friction, improves drivetrain smoothness, and delivers long-lasting, trouble-free performance for competitive racing. Features: Premium sealed bearings for protection against dirt and debris Low-friction design for smoother, more efficient operation Factory Team quality for professional-level performance and durability Direct fit for the RC10B7 buggy Includes: (1) Complete Factory Team Bearing Set for RC10B7 A must-have upgrade for racers who want maximum drivetrain efficiency and reliability.

Read more less

4 piece set Hex  1.5mm 2.0mm 2.5mm 3.0mm     

Read more less

1up Racing LowPro 5mm Bullet Plugs – Ultra-Low Resistance, Pro-Level Finish ⚡ Dial in your wiring setup with 1up Racing LowPro 5mm Bullet Plugs — engineered for elite-level performance and clean installs. These compact, low-profile plugs feature an oversized 6-point contact for rock-solid connections and ultra-low resistance, maximizing efficiency and power delivery. 💡 Designed with a deep solder recess and only 15mm total length, these plugs are ideal for tight spaces and lightweight builds. Perfect for all LiPo batteries with 5mm inputs. ✨ Key Features: 🔩 LowPro Design – Just 15mm long for reduced weight and a cleaner install⚡ Oversized 6-Point Contact – Ensures secure fit and minimal resistance🔥 Easy-Solder Recess – Create strong, clean solder joints with 11–16 gauge wire📦 Universal Fit – Compatible with all LiPo packs using 5mm bullet connectors🛠️ Lightweight & Efficient – Built for performance and durability 📦 What’s in the Box? ✔️ (2) 1up Racing LowPro 5mm Bullet Plugs 💡 Upgrade Your Wiring Game – Get 1up Racing LowPro Bullet Plugs Today!

Read more less

Traxxas 2300mAh 11.1V 3-Cell LiPo Battery w/ iD® Connector (Part #2824X) 🔋Reliable Power for High-Performance RC Systems This 3S 11.1V 2300mAh LiPo battery delivers solid performance and long-lasting power in a compact footprint. Perfect for vehicles that require a lightweight, high-output pack, this Traxxas battery is equipped with an iD® connector for seamless charging and foolproof setup with Traxxas iD-compatible chargers. ⚡ Features: 🔋 2300mAh Capacity – Balanced power-to-weight ratio for 3S vehicles 🔌 11.1V 3-Cell Configuration – Ideal for compact models needing high voltage 🔗 Traxxas iD® Connector – Ensures safe, automatic charger settings 🧊 Hard Case Design – Durable protection for everyday use 📏 Compact Dimensions – Great for tight battery compartments 📦 Specifications: Voltage: 11.1V Cell Count: 3S (3-cell LiPo) Capacity: 2300mAh Connector Type: Traxxas High-Current iD® Compatible with select Traxxas 1/10 and 1/16 scale vehicles.Always use a Traxxas iD®-compatible charger for optimal performance and safety. 🔌✅

Read more less

Expand your RC electronics setup with the EcoPower Heavy Duty Universal Servo Y Extension Lead. Designed for reliable signal splitting and dependable power delivery, this heavy-duty harness allows you to run two servos from a single receiver channel while maintaining consistent performance in demanding applications. Featuring thick 22AWG wiring and universal connector compatibility, the ECP-1542 is an excellent choice for crawlers, boats, airplanes, dual-servo steering setups, and custom RC builds. ⚡ Features: 🔌 Splits one receiver channel into two servo outputs💪 Heavy-duty 22AWG wire construction for increased current capacity📏 Convenient 15cm (6-inch) length⚙️ JR-style male connector for broad compatibility🔧 Dual female servo connectors🚀 Handles high-current applications with ease🛡️ Durable insulation for long-lasting reliability🌎 Compatible with most major servo brands and radio systems 📦 Includes: (1) EcoPower Heavy Duty 15cm Universal Servo Y Extension Lead(1 Male Connector / 2 Female Connectors) 📏 Specifications: Part Number: ECP-1542Length: 15cm (6in)Wire Gauge: 22AWGConnector Type: JR Style Male to Dual Female Servo Connectors 🔧 Compatibility: Compatible with: Futaba Servos JR Servos Airtronics Servos HiTec Servos Most standard RC receiver and servo systems Perfect for: Dual steering servo setups Dual elevator servos Scale accessories Winch systems Lighting controllers Custom RC projects 💡 Pro Tip: Servo Y-harnesses are commonly used in crawlers and monster trucks running dual steering servos. For high-torque servo applications, make sure your BEC or receiver power system is capable of supplying enough current for both servos operating simultaneously. 🔥🔌🏁

Read more less

Keep your drivetrain running smooth and protected with R1WURKS Black WS2 Grease. Specially formulated for high-performance RC applications, this grease is ideal for universal joints, dogbones, drive cups, and other high-load drivetrain components where reduced friction and long-lasting lubrication are critical. Infused with WS2 (Tungsten Disulfide) particles, this grease provides exceptional lubrication under extreme pressure while maintaining smooth performance even at elevated temperatures. ⚙️ High-Performance Drivetrain Lubrication The WS2 formula offers an extremely low coefficient of friction, helping drivetrain components operate more efficiently while reducing wear. With an impressive 300,000 PSI load-bearing capacity, it is designed to handle the heavy loads and impacts commonly experienced in RC racing and bashing. 🔧 Built for Extreme Conditions R1WURKS Black WS2 Grease is engineered to remain stable even in harsh environments. Its high dropping point allows it to stay fluid at high temperatures, preventing the grease from breaking down or solidifying during demanding runs. It also provides strong resistance against water, rust, and humidity, helping protect components from corrosion and long-term wear. ⚡ Features Designed for RC drivetrain components Ideal for dogbones, drive cups, and universal joints WS2 (Tungsten Disulfide) lubrication technology Extremely low coefficient of friction 300,000 PSI load-bearing capacity Excellent resistance to water, rust, and humidity High-temperature stability Resists abrasion and extreme pressure 📦 Includes (1) 3g Tube of R1WURKS Black WS2 Grease A must-have maintenance product for racers and builders looking to reduce drivetrain friction, protect components, and maintain peak performance.  

Read more less

Give your RC10B7 or B7D the competitive edge with the JConcepts S15—a high-performance body shell engineered specifically around the newest Team Associated chassis design. Developed from the winning DNA of the Silencer series, the S15 combines sharp steering response, increased stability, and efficient airflow management to elevate your buggy’s performance on carpet, turf, or dirt. Available in Standard or Lightweight versions to tailor your build to track conditions and driving style. S15 Body Overview The S15 features JConcepts’ signature forward-biased cab and dual-channel rear airflow, paired with mid-body winglets and a refined rear stabilizer kick-up to enhance cornering grip and straight-line stability. The integrated cockpit “shark fin” adds rigidity and helps keep the buggy tracking correctly at high speeds. Raised rear side-pods provide additional clearance for taller shorty LiPos and the B7/B7D saddle pack configuration—ensuring compatibility with the platform’s multiple battery layout options. Key Features Designed specifically for the Team Associated RC10B7 & B7D platforms Modern S15 aerodynamic package Forward cab bias improves steering precision Mid-body winglets & stabilizer kick-up increase downforce Cockpit “shark fin” enhances tracking and roof rigidity Raised rear side-pods for various battery configurations Clear polycarbonate with protective overspray film Available in Standard or Lightweight materials Includes (1) JConcepts RC10B7/B7D S15 Clear Buggy Body (1) Decal Sheet (1) Window Mask Sheet Note Body ships clear and unpainted Painted photos shown for illustration purposes only  

Read more less

Upgrade the durability and precision of your Arrma Mojave Grom with the Hot Racing Aluminum Rear Lower Arm Set. Machined from high-strength aluminum and anodized black, these arms offer increased rigidity and improved suspension performance over stock plastic components. Perfect for hard bashers and racers who want a tighter, more consistent feel under high loads. 🟢 Features CNC-machined aluminum construction Durable anodized black finish Increased strength and stiffness compared to stock arms Helps improve handling precision and durability Premium fit and finish 📦 Includes (2) Aluminum Rear Lower Suspension Arms 🔧 Compatibility Arrma Mojave Grom 🏁 Built for Bashers Take control of your suspension and eliminate weak links with this high-quality upgrade from Hot Racing.  

Read more less

Fine-tune your gearing with the Team Associated 48 Pitch, 69 Tooth Spur Gear. This optional upgrade offers smooth, efficient power transfer and allows racers to dial in the perfect gear ratio for their setup. 🔥 Key Features: Precision-molded 48 pitch, 69 tooth spur gear Provides smooth, efficient drivetrain performance Optional tuning part for gearing adjustments Genuine Team Associated quality for durability and accuracy ✅ Compatibility: Team Associated Apex Team Associated TC5 Team Associated TC6.1 Team Associated TC6.2 Team Associated TC7 (Original) Team Associated TC7.1 Team Associated TC7.2 📦 Includes: (1) 48P Spur Gear (69T) ⚠️ Tip:Pair with the right pinion gear to optimize top speed vs. acceleration for your track conditions.  

Read more less

Overview:The JConcepts XRAY XB2 2025 “S2” 1/10 Buggy Body delivers pro-level performance and aerodynamic precision for the latest XB2 platform. Originally designed for world-champion competition, the S2 design has become a staple for racers running low-profile setups on dirt, carpet, or turf. Precision-molded from high-quality clear polycarbonate, the S2 body features an aggressive low-drag profile with refined airflow management and enhanced downforce for stable, responsive handling.Available in both Standard (0685) and Lightweight (0685L) versions to match your preferred balance of strength and agility. About the S2 Buggy Body Streamlined Style & PerformanceThe S2 body uses computer-aided design to achieve symmetry, precision, and consistent airflow. Its low-profile cab, recessed hood, and dual window design enhance cooling and responsiveness, while the integrated center fin improves high-speed stability. Sidepod scoops can be trimmed to tune downforce or airflow, and the body wraps snugly around the XRAY spur-gear guard for a perfect fit. Each kit includes two 6.5" wings, making it a versatile choice across all surface types. Features Aerodynamic low-profile shape reduces drag and boosts corner speed Dual-window cab and recessed hood for improved airflow and cooling Rear sidepod scoops for customizable downforce or airflow tuning Stabilizing center fin and reinforced side rails for durability Perfect fit around XRAY spur-gear guard Includes two 6.5” wings for multi-surface versatility Available in Standard and Lightweight options Includes (1) XRAY XB2 2025 “S2” 1/10 Buggy Body (choose Standard or Lightweight) (2) Wings (1) Decal Sheet (1) Window Masking Sheet Compatibility XRAY XB2 2025 Tech Note: Painted body shown in photos is for illustrative purposes only. The product you will receive is clear and unpainted.

Read more less

Boof RC EC5 Female to TRX-Style Male Adapter⚡ Seamless Power Conversion — Boof Style. This Boof RC adapter connects an EC5-equipped battery to vehicles using a TRX-style plug (compatible with Traxxas-style connectors—without naming names). Made with quality materials and a compact design, it’s perfect for racers, bashers, and anyone needing a reliable connection without the hassle of soldering. ✅ EC5 Female to TRX-Style Male✅ 12AWG wire for solid current handling✅ Compact and clean 5cm length✅ Great for adapters, charging setups, or direct installs✅ No soldering required—plug and play! 📦 Includes:(1) EC5 Female to TRX-Style Male Adapter 💡 Boof Tip: Keep a few in your pit bag—you never know when a mismatched plug combo will show up.

Read more less

🔩 Arrma Granite Grom Front Suspension Arm Set "A" 🔩💥 Durable Replacement Suspension Arms for Granite & Typhon Grom 💥 Keep your Arrma Grom running strong with the Granite Grom Front Suspension Arm Set "A"! Whether you're hitting jumps, bashing through rough terrain, or just cruising, these tough suspension arms are designed to handle it all. Perfect for replacing worn or broken parts, this set ensures your RC stays race-ready and trail-tough. 💪🏆 Compatible with both the Granite Grom and Typhon Grom, installation is a breeze—so you can spend less time in the workshop and more time tearing it up! 🚗💨 ✅ Key Features: ✨ Direct replacement for stock components🛠️ Precision-molded for strength & durability🚙 Compatible with Arrma Granite Grom & Typhon Grom⚡ Easy installation for quick repairs💯 Includes both upper & lower front arms 📦 Includes: ✔️ (2) Front Upper Arms✔️ (2) Front Lower Arms 🔗 Compatibility: 🔸 Arrma Granite Grom🔸 Arrma Typhon Grom

Read more less

NEXX Racing Arrma Grom Reservoir Threaded Aluminum Oil-Filled Shocks (Black, Red, OR Blue) (4) (58mm) 🔥 High-Performance Adjustable Shocks for the Arrma Grom! 🚗💨 Upgrade your Arrma Grom with the NEXX Racing 58mm Aluminum Oil-Filled Threaded Reservoir Shocks! Engineered with precision CNC-machined aluminum, these shocks provide smoother dampening, extra tunability, and longer travel than stock shocks. The fully functional reservoir with a realistic divider piston allows you to adjust the rebound for customized suspension performance, making them a must-have upgrade for any Arrma Grom enthusiast. 🏆 Whether you're bashing, jumping, or racing, these oil-filled, threaded aluminum shocks offer unmatched durability, precision, and control over rough terrain. Available in Black, Red, or Blue anodized finishes, these shocks will not only enhance performance but also give your Grom a sleek, race-inspired look! ✨ Key Features: ✔️ Perfect Fit for Arrma Grom Platforms – Direct drop-in replacement upgrade 🛠️ CNC-Machined Aluminum Construction – Provides strength and durability 🔥 Fully Functional Reservoir with Divider Piston – Allows precise shock rebound tuning 💨 Super Smooth Dampening Action – Reduces bounce for better control 🔩 Completely Serviceable Design – Fine-tune your spring rate and dampening effect 🛞 Adjustable Spring Preload & Bleed Valve – Customize suspension for different terrains 🛠️ Inner O-Ring Design – Prevents leaks for long-lasting performance 🎨 Available in Multiple Colors – Choose from Black, Red, or Blue anodized finishes 🚀 Pre-Assembled & Includes Springs – Ready for installation out of the box 📦 What’s in the Box? (4) Pre-Assembled Aluminum Oil-Filled Shocks (w/ Black Soft Springs) (1) Hex Key Allen Wrench 📌 Note: These shocks are fully tunable and designed for custom performance tuning. 📊 Specifications: Scale: 1/18 Length: 58mm (2.28in) Compressed Length: 41mm (1.61in) 🏁 Elevate Your Arrma Grom’s Suspension Performance! 🔥 Whether you're looking for better handling, smoother dampening, or a stylish upgrade, the NEXX Racing Reservoir Shocks provide precision performance and ultimate durability. 💨 Upgrade today and take your Arrma Grom to the next level! 🏆🏁

Read more less

 ⚡ Sensored Precision. Castle Power. Waterproof Performance. Take your mini-scale RC to the next level with the Castle Creations Mamba Micro X2 Brushless Combo. Featuring the powerful 1007-6350Kv Sensored Brushless Motor paired with the legendary Mamba Micro X2 ESC, this system delivers ultra-smooth throttle response, incredible efficiency, and race-proven reliability for 1/14 and 1/16 scale vehicles. Whether you're crawling technical terrain, racing on the track, or launching hard off the line, the Mamba Micro X2 provides the precision, power, and tunability that Castle Creations is known for. ⚡ Features: 🔥 Powerful 6350Kv 4-pole sensored brushless motor⚙️ Sensored and sensorless operation capability💧 Waterproof ESC design for all-weather driving📱 Castle Link programmable via USB or optional Bluetooth adapter📊 Built-in data logging and telemetry support🚀 CRYO-DRIVE technology improves efficiency and reduces heat🔧 Adjustable external 10-amp BEC included📡 Auxiliary wire functionality for on-the-fly tuning adjustments🔔 Audible alerts for diagnostics and setup assistance🏁 Exceptional throttle control and ultra-smooth starts ⚙️ Mamba Micro X2 ESC Specifications: Input Voltage: 2S–4S LiPo (16.8V Max)BEC Output: 5.5V or 7.5V AdjustableWaterproof: Yes*Reverse: Yes (can be disabled)Brake: ProportionalCooling Fan: Not IncludedDimensions: 41.6 x 29.4 x 21.3mmWeight: 47gMotor Connectors: 3.5mm Bullet Connectors ⚙️ 1007-6350Kv Motor Specifications: Kv Rating: 6350KvInput Voltage: 2S–3S LiPoMaximum RPM: 80,000Diameter: 28mmLength: 50.3mmWeight: 114.8gShaft Diameter: 3.17mm (1/8")Connectors: 4mm Male Bullets 🚀 Advanced Castle Technology: ⚡ QUIETSENSE sensor technology for ultra-precise motor synchronization🛡️ Flux Shield design minimizes sensor interference🔥 Improved 4-pole, 12-slot motor design for greater efficiency and lower temperatures📈 Data logging for advanced performance analysis📲 Compatible with Castle Link software and Castle Link mobile app📡 Telemetry ready for supported Futaba radio systems 📦 Includes: (1) Castle Creations Mamba Micro X2 ESC(1) Castle Creations 1007-6350Kv Sensored Brushless Motor(2) Motor Sensor Harnesses(1) Quick Start Guide(1) Castle Decal Sheet 🔧 Compatibility: Axial Yeti Jr.LaTrax TetonLosi Mini-T 2.0Traxxas 1/16 RallyMany 1/14 and 1/16 scale vehicles up to approximately 2.75 lbs ⚠️ Important Notes: 🔋 ESC supports 2S–4S LiPo batteries🔋 Motor is recommended for 2S–3S LiPo operation🔧 Battery connector must be installed separately🌡️ Monitor motor and ESC temperatures and keep below 180°F💧 Waterproof design is not intended for full submersion 💡 Pro Tip: For racers, the sensored setup delivers smoother launches and more predictable throttle control. For crawlers, the precise low-speed operation and incredible torque make technical climbs easier and more controllable than traditional sensorless systems. 🏁🔥

Read more less

🔧 Stronger Steering. Sharper Response. Clean Upgrade. The Hot Racing Aluminum Servo Saver Set is a durable upgrade for Arrma Grom platforms, replacing the stock plastic saver with a more precise and reliable aluminum design. 🏁 About the Aluminum Servo Saver 🎯 Precision & Control CNC-machined for an accurate fit, this servo saver helps improve steering response and consistency—especially in demanding off-road conditions. 💪 Durable Upgrade Constructed from lightweight aluminum, it offers increased strength over stock plastic components while maintaining a clean, premium look. ⚠️ Servo Compatibility Note Designed specifically for 25T spline servos. This will NOT work with the stock Grom servo. 🔧 Key Features ✔ CNC-machined aluminum construction✔ Stronger than stock plastic parts✔ Lightweight design✔ Anodized finish for corrosion resistance✔ Improves steering response and durability✔ Designed for 25T spline servos 📦 Includes (1) Aluminum Servo Saver Set (25T) 🚗 Compatibility Arrma Granite Grom Arrma Mojave Grom Arrma Typhon Grom 🔧 Upgrade your steering. Tighten your control. Drive with confidence.    

Read more less

The Team Associated Factory Team Carbon Front Suspension Arms for the RC10T7 and RC10SC7 are a high-performance upgrade designed to increase rigidity and improve suspension consistency under demanding racing conditions. Built using AE’s legendary carbon composite material, these arms reduce flex found in standard suspension components, resulting in more precise handling and predictable performance on the track. Engineered as part of the Factory Team lineup, these arms deliver race-proven strength and durability while maintaining perfect fit and compatibility with the RC10T7 and RC10SC7 platforms. Features Factory Team carbon composite construction Increased rigidity for improved suspension response Reduces flex compared to stock arms Enhances durability and strength Improves handling consistency during high-stress driving Direct-fit Factory Team upgrade Includes (2) Factory Team Carbon Front Suspension Arms Compatibility Team Associated RC10T7 Team Associated RC10SC7 A race-ready suspension upgrade designed for drivers looking for improved precision, durability, and consistency on the track. 🏁

Read more less

The F2 body from JConcepts brings IFMAR World Championship–winning design to the Losi 22X platform. Precision-engineered for a tight, clean fit, the F2 slides perfectly over the top deck and under the front shock tower, delivering race-proven aerodynamics and durability across dirt, carpet, and turf. About the F2 Buggy Body Proven Design & Advanced FeaturesThe aggressive, forward-biased cab improves steering response and adaptability on changing surfaces. A louvered roof with the Finnisher “V” profile enhances airflow and stability, while chamfered side-pods blend seamlessly into the cab for reduced drag. Extra rear windows add style, and reinforced spur-gear guard coverage with added clearance helps absorb impacts. Choose Standard or Lightweight thickness to match track conditions and durability needs. Features Proven F2 design from IFMAR World Championship lineage Forward-positioned cab with steep windshield for multi-surface control Tight chassis-outline fit for secure, clean mounting Louvered roof & Finnisher “V” for improved airflow and stability Double-step side-pods and roof for standout styling Reinforced spur-gear guard coverage with added clearance Includes (1) TLR 22X “F2” 1/10 Buggy Body (Clear) — Standard (0707) or Lightweight (0707L) (2) 6.5" Wings (carpet/turf/dirt) (1) Decal Sheet (1) Window Masking Sheet Compatibility: Losi 22XTech Note: Painted body shown for illustration only. Product is clear and unpainted.  

Read more less

📡 Unlock FlySky Control for Your Mini-Z EVO! The Kyosho FlySky Noble Mini-Z EVO Receiver lets you take full advantage of FlySky’s advanced performance and precision on your Mini-Z platform. Designed specifically for seamless compatibility with FlySky Noble transmitters, this receiver transforms your Mini-Z EVO chassis into a responsive, competition-ready machine. Enjoy smoother throttle response, faster input translation, and a rock-solid connection every time you race. ⚡ Features: Enables use of FlySky Noble transmitters with Mini-Z EVO chassis Provides fast, interference-free AFHDS3 signal performance Plug-and-play installation — no soldering required Designed for maximum response and precision control Compact and lightweight for ideal chassis balance Genuine Kyosho quality and reliability 📦 Includes: (1) Kyosho FlySky Noble Mini-Z EVO Receiver 🔧 Compatibility: Kyosho MR-02 Kyosho MR-03 💡 Pro Tip:Pair with a FlySky Noble NB4+ or NB4+ Pro transmitter for the ultimate precision control setup on your Mini-Z EVO!

Read more less

Stronger. Stiffer. Smarter. Push your setup to the next level with the Factory Team Carbon V2 Caster & Steering Blocks Set, designed for the RC10T7 and RC10SC7 platforms. Crafted from Team Associated’s legendary carbon composite material, this high-performance upgrade delivers exceptional rigidity, reduced flex, and race-winning precision for serious competitors. Factory Team Engineering Developed by Team Associated’s Factory Team division, these Carbon V2 Caster & Steering Blocks are built for racers who demand consistent steering feel and maximum durability under pressure. The improved carbon design minimizes deflection for more accurate cornering response and improved high-speed stability, giving you total control lap after lap. Features: Constructed from AE carbon composite material for maximum strength and precision Increased rigidity reduces unwanted flex under load Enhanced durability for high-stress racing environments Improved handling consistency and cornering feedback Factory Team quality ensures perfect fit and race-ready reliability Includes: (1) Front Factory Team Carbon V2 Caster & Steering Blocks Set Compatibility: Team Associated RC10 SC7 Team Associated RC10 T7 Team Associated Factory Team — Engineered to Win.

Read more less

Upgrade your control system with the Flysky FGr4D, a compact and reliable 4-channel receiver built for the latest AFHDS 3 protocol. Designed for surface RC applications, this receiver delivers ultra-fast response, rock-solid signal stability, and a space-saving design that fits easily into tight chassis layouts. Perfect for racers and bashers alike, the FGr4D ensures precise control with minimal latency—giving you the edge when it counts. 🔹 Features: 4-channel compact receiver for surface RC AFHDS 3 protocol for lightning-fast response High sensitivity and reliable signal stability Lightweight, low-profile design fits tight spaces Ideal for cars, trucks, and other surface applications 🔹 Specifications: Channels: 4 Protocol: AFHDS 3 Frequency: 2.4GHz Antenna: Single Dimensions: 18.6×20.5×7.25mm Weight: 3.6g Operating Voltage: 3.5–8.4V Range: 100m+ (line of sight) ✅ Compatibility: Flysky AFHDS 3 transmitters (check your model for compatibility) 📦 Includes: (1) Flysky FGr4D 4-Channel Receiver

Read more less

Boof RC Charging Lead – XT60 Female to EC3 Male A compact powerhouse for your charging setup, the Boof RC XT60 to EC3 lead is built for racers who need reliable performance and clean connections. Whether you're charging 2S or 3S LiPos, this lead handles the job with ease. ✅ XT60 Female plugs directly into your charger✅ EC3 Male fits many mid-size LiPo batteries✅ Flexible 12 AWG silicone wire for high-current loads✅ Precision-soldered and heat-shrunk for durability✅ Ideal for compact packs used in 1/10 scale vehicles 📏 Length: ~300mm⚡ Wire Gauge: 12 AWG🔌 Connector A: XT60 Female🔌 Connector B: EC3 Male 💡 Boof Tip: EC3 is the go-to connector for mid-range setups—this lead makes charging easy, safe, and fast.

Read more less

Traxxas Funco® Pro Scale® 2WD Brushless RTR Sand Car w/TQi 2.4GHz Radio, Link Module & TSM – Available in Red, Orange, Green, or Blue Dominate The Sand!Inspired by the full-sized, 1000+ HP Funco Motorsports dune monster, the Traxxas Funco® Pro Scale® Sand Car brings unmatched speed and realism to the sand. Built on the high-performance X-Series™ chassis and powered by the VXL-8s Brushless System, it hits speeds over 55+ mph while maintaining total control thanks to Traxxas Stability Management® (TSM) and an innovative front disc braking system. With belted sand paddle tires, GT-Maxx® aluminum shocks, and a detailed Pro Scale® body—this machine isn’t just fast, it’s fierce. 🔥 Key Features: Official Pro Scale® Replica of the Funco Motorsports Sand Car VXL-8s Brushless Power System – Speeds of 55+ mph Front Disc Brakes + Rear Motor Braking for ultimate control TSM® (Traxxas Stability Management) for stability on loose terrain GT-Maxx® Aluminum Shocks with extended travel Belted Paddle Tires – Optimized for sand 2085XL Metal Gear Servo with 25% more torque Color-Matched Whip Lights with Flex-Tech™ mounts Ultra-HD Steel Gears for drivetrain durability 📦 In The Box: (1) Traxxas Funco® Pro Scale® 2WD Brushless RTR Sand Car (1) TQi™ 2.4GHz Radio System (1) Traxxas Link™ Wireless Module (1) User Manual 🔧 Needed To Complete: (4) AA Batteries for the transmitter (2) 4S LiPo Batteries (Traxxas iD recommended) (1) Compatible LiPo Battery Charger 📐 Specs: Scale: 1:7 Drive: 2WD Power: 8S LiPo Length: 31.97" (812mm) Width: 21.69" (551mm) Height: 11.14" (283mm) Wheelbase: 21.38" (543mm) Weight: 22.06oz (625.39g) Motor: Brushless - Sensorless ESC: Brushless - Sensorless Servo: 2085XL Metal Gear Tires: Front – Arrow Pattern / Rear – Paddle Wheels: 4.9" (F/R) Assembly Level: Ready-To-Run (RTR)* Tech Note: RTR models include installed electronics and transmitter. Please refer to the “Needed To Complete” section to ensure you're fully equipped to run.

Read more less

Traxxas X-Maxx 8S 1/6 4WD Brushless RTR Monster Truck (Blue, Green, Orange, or Red) – w/ TQi Radio, TSM & Belted Tires 📈 OVER 50MPH. FULL 8S POWER. UNREAL DURABILITY. Get ready to unleash one of the most powerful monster trucks ever created! The Traxxas X-Maxx 8S RTR tears through terrain with over 50mph speed, belt-reinforced Sledgehammer tires, and all-metal drivetrain strength. Whether you're racing, bashing, or dominating backyard trails, this beast delivers jaw-dropping action straight out of the box. 🔥 Key Features: 🛞 8S Belted Sledgehammer Tires – High-speed stability and grip 💪 VXL-8S Brushless Power System – Over 50+ MPH with optional spur gear ⚙️ Full Metal Drivetrain & CVDs – Built for extreme abuse 🛡️ Clipless Reinforced Body – Easy on/off + added durability 🔧 GTX Aluminum Shocks – Massive damping for rough terrain 🧠 Traxxas Stability Management (TSM) – Driver-assist technology for max control 📡 TQi 2.4GHz Radio System – Real-time telemetry capable (via optional Link module) ❄️ Dual Cooling Fans & Heat Sink – Keep temps low, even when pushing limits 🎨 Available Colors: Blue Green Orange Red 📦 What's In The Box: (1) Traxxas X-Maxx 8S RTR Monster Truck (Color of your choice) (1) TQi 2.4GHz Transmitter with TSM (1) Product Manual 🔋 Needed to Complete: (2) Traxxas 4S LiPo Batteries w/ iD Connector (1) Compatible Traxxas iD Charger (4) AA Batteries for Transmitter ✅ Recommended Add-Ons: EZ-Peak Live Dual iD Charger w/ (2) 4S 6700mAh LiPo Batteries 📐 Specs: Scale: 1/6 Length: 30.67" (779mm) Width: 21.3" (540mm) Height: 13.79" (350mm) Wheelbase: 18.92" (480mm) Weight: 19.1 lbs (8.66kg) Ground Clearance: 4" (102mm) Wheel Hex: 24mm splined Power Source: Electric Input Voltage: 6S–8S LiPo (22.2–29.6V) Completion Level: Ready-To-Run (RTR) 💣 Dominate anything in your path. The X-Maxx isn’t just a monster—it's the monster.🚀 Built to bash. Engineered for power. Made by Traxxas.

Read more less

1up Racing Pro Duty Equipment Case – Built for the Track, Ready for Anything 🔧 Protect your gear like a pro with the 1up Racing Pro Duty Equipment Case – the ultimate storage solution for racers who value durability, organization, and style. Whether you're hauling tools, electronics, or spare parts, this case is engineered to keep your essentials safe and scratch-free. 💼 Featuring a rigid outer shell, dense internal padding, and six customizable dividers, this case adapts to your setup with ease. Impact-absorbing foam on the top and bottom adds next-level protection, while the internal compartments and zippered pouch keep everything neat and accessible. ✨ Key Features: 🛡️ Heavy-Duty Shell with Dense Padding – Keeps your tools, chargers, and electronics safe📦 Adjustable Dividers – 6 foam inserts for a fully customizable interior layout🧵 Durable Black Fabric Interior – Clean, professional finish inside and out🧰 4 Tool Pouches + Zippered Pocket – Store scissors, pliers, leads, setup sheets, and more🧩 Impact-Absorbing Foam (Top & Bottom) – Superior protection during transport 📏 Dimensions: Interior Space: 23 x 20 x 7.5cm\ Dividers Included:✔️ (1) 23cm Divider✔️ (2) 12.5cm Dividers✔️ (3) 6.5cm Dividers 🎯 Built to Travel. Designed to Organize. Whether you're trackside or organizing your pit area at home, the 1up Racing Pro Duty Equipment Case keeps your essentials secure, accessible, and race-ready. 💡 Organize Like a Pro – Grab Your 1up Equipment Case Today!

Read more less

Dial in your handling and cornering performance with the Hot Racing Anti-Roll Sway Bar Set for Arrma Grom platforms. This precision upgrade reduces chassis roll and improves stability, giving your rig more control and speed through corners on any surface. Designed for performance tuning, this set allows you to fine-tune front and rear roll stiffness, helping balance your setup for different track conditions. The color-coded sway bars make it easy to identify thickness options at a glance, while the durable, rust-resistant construction ensures long-lasting performance. 🔧 Features:• Designed specifically for Arrma Grom platforms• Improves cornering stability and overall handling• Allows tuning of front and rear suspension stiffness• Color-coded sway bars for quick identification• Durable, rust-resistant construction• Precision fit for consistent performance 📦 Includes:• (1) Front & Rear Anti-Roll Sway Bar Set ⚙️ Specifications:• Material: Aluminum components with steel sway bars ⚠️ Tech Note:• Requires Hot Racing suspension arms (GRM55N01 & GRM56N01)• Not compatible with stock suspension arms ✅ Compatibility:• Arrma Granite Grom• Arrma Mojave Grom Take control of your chassis and carry more speed through the corners with the Hot Racing sway bar set, built for racers who want sharper handling and better overall performance.      

Read more less

Boof RC T-Plug Connector Set – Male & Female (2pcs) Upgrade or repair your power connections with the Boof RC T-Plug Connector Set. This set includes one male and one female Deans-style T-plug, giving you everything you need to create a strong and reliable connection for your RC battery or ESC wiring. T-plugs are a long-time favorite in the RC world thanks to their compact size, secure fit, and excellent current handling. Whether you're building custom battery leads, repairing worn connectors, or upgrading your electronics setup, these connectors deliver dependable performance. 🔧 Features:• Includes 1 Male and 1 Female T-Plug connector• Compact Deans-style design for secure connections• Excellent conductivity for reliable power transfer• Durable construction for long service life• Ideal for soldering custom battery or ESC leads 🏁 Perfect For:• RC cars and trucks• Battery and ESC wiring• Custom power leads• Repairing or upgrading connectors Keep your power system running strong with the Boof RC T-Plug connector set, built for reliable performance and clean wiring in any RC setup.  

Read more less

The Team Associated RC10T7 and RC10SC7 Rear Suspension Arms are genuine replacement components designed to restore proper suspension performance and durability. Manufactured to factory specifications, these rear arms ensure correct geometry, strength, and consistent handling for your T7 or SC7 platform. Perfect for routine maintenance, race-day repairs, or keeping a spare set in your pit box. Features Genuine Team Associated replacement parts Factory-fit rear suspension arms Maintains proper suspension geometry Durable construction for racing conditions Includes (2) RC10T7 / RC10SC7 Rear Suspension Arms Compatibility Team Associated RC10 SC7 Team Associated RC10 T7 A dependable replacement set to keep your suspension tight, consistent, and race-ready. 🏁  

Read more less

The Kyosho Mini-Z MR-03 Mazda 787B Body Set is an optional unpainted body designed for the Kyosho Mini-Z MR-03 RWD platform. Inspired by the legendary Mazda 787B, this body set gives Mini-Z racers and collectors the freedom to create a fully custom paint scheme while maintaining factory Kyosho fit and scale accuracy. Molded in white plastic, this body is ideal for hobbyists who enjoy painting and detailing their own Mini-Z bodies. Whether you’re building a shelf-quality replica or a track-ready racer, this set delivers authentic style with Kyosho precision. ⚠️ Note: This body set is unpainted and requires paint for a realistic finished appearance. Features Official Kyosho Mazda 787B body design Unpainted white plastic for custom paint schemes Precision fit for Mini-Z MR-03 RWD chassis Perfect for racers and scale Mini-Z builders Compatibility Kyosho Mini-Z MR-03 (RWD) Includes (1) Unpainted Body Shell (1) Accessory Set (1) Window Insert (4) Wheels

Read more less

Give your B74.2 the aerodynamic advantage it deserves with the JConcepts S15—a refined, high-performance body shell designed for peak competition. Inspired by the winning heritage of the Silencer series, the S15 introduces updated airflow features, improved chassis clearance, and stability enhancements tailored specifically for the Team Associated RC10 B74.2 platform. Available in Standard or Lightweight options to suit your setup and driving style. S15 Body Overview JConcepts engineered the S15 to complement the modern B74.2 chassis layout. This includes raised side-pods for compatibility with tall shorty packs and saddle configurations, as well as tuned aerodynamics for improved cornering and stability. Mid-body winglets and a rear stabilizer kick-up provide enhanced downforce, while the signature cockpit “shark fin” increases straight-line tracking and structural integrity. The result: a body that delivers balance, steering predictability, and high-speed stability across carpet, turf, and dirt surfaces. Key Features Precision fit for the Team Associated RC10 B74.2 Updated S15 aero package for improved stability and corner speed Forward cab bias for aggressive steering response Mid-body winglets & rear kick-up for added downforce Cockpit “shark fin” enhances tracking and rigidity Raised rear side-pods for modern battery layouts Clear polycarbonate with overspray protective film Available in Standard or Lightweight versions Includes (1) JConcepts RC10 B74.2 S15 Clear Buggy Body (1) Carpet Wing (1) Decal Sheet (1) Window Mask Set Note Body ships clear and unpainted Painted examples shown for reference only

Read more less

Sharpen Your Steering. Increase Stability. Go Faster. Dial in front-end precision with the Team Associated RC10T7/RC10SC7 Front Anti-Roll Sway Bar Set — a must-have tuning upgrade for racers looking to reduce chassis roll, increase steering consistency, and fine-tune handling for any surface. Whether you're running high-grip carpet, loose dirt, or rough outdoor terrain, this sway bar set helps keep the front of your truck planted and predictable where it matters most. About the Sway Bar Set Versatile Tuning for Any Track The Front Anti-Roll Sway Bar Set gives you multiple bar thickness options so you can tailor front-end stability to match your track conditions and driving style. ✔ Thicker bar = more stability, smoother steering✔ Thinner bar = more steering rotation This lets you quickly tune steering response, reduce traction rolling, and achieve a balanced, confidence-inspiring setup. Features Three sway bar sizes for fine-tuned handling Reduces chassis roll for improved front-end consistency Boosts steering stability on tight, loose, or bumpy tracks A must-have in any race-day tuning kit Direct fit for RC10SC7 and RC10T7 platforms Includes (1) Front Anti-Roll Sway Bar Set (multiple bar thicknesses)

Read more less

Overview:Experience pure rally excitement with the Traxxas Mini Rally VXL Ford RS200 — a powerful, scale-realistic rally car that blends breathtaking speed, rugged durability, and authentic Ford styling. Powered by the Velineon® 3500 brushless motor and VXL-3s ESC, this compact powerhouse hits 40+ mph on 2-cell LiPo and 55+ mph on 3-cell power. From dirt tracks to pavement, the RS200 delivers big performance in a compact, ready-to-run package. Authentic Ford RS200 Style Clipless replica Ford RS200 body with molded details, front splitter, air intakes, and mirrors High-output LED light pods for realistic night driving Reinforced side skirts and a durable front splitter Available in multiple color schemes including Fox 1 Black, Fox 2 Orange, and FOXSE Gold Brushless Power System Velineon® 3500 brushless motor with precision-balanced rotor and sintered neodymium magnets VXL-3s ESC with three programmable modes: Sport Mode: Forward / Brake / Reverse Race Mode: Forward / Brake Training Mode™: 50% Forward / 50% Reverse Waterproof design with heat sink and cooling fan Capable of 55+ mph with 3-cell LiPo (sold separately) Advanced Chassis & Driveline Full-time shaft-driven 4WD for consistent traction on all surfaces Direct-drive center differential with steel planetary gears Heavy-duty 32-pitch gearing and sealed differentials Modular long-wheelbase chassis (262 mm) for stability and scale proportions Easy battery access with pivoting hold-down system Suspension & Handling Full-size oil-filled Ultra Shocks™ with large oil capacity Heavy-duty suspension arms and dual-wishbone design 2075X metal-gear servo with double-shear bellcranks Traxxas Stability Management® (TSM®) for improved traction and control on slippery surfaces Wheels, Tires & Hardware White rally wheels with high-traction rally tires Aggressive tread pattern for grip on dirt, gravel, and asphalt Softer rear compound for balanced handling Rust-resistant black oxide-coated hardware and sealed ball bearings Includes: (1) Mini Rally VXL Ford RS200 Ready-To-Race® Rally Car (1) Pre-painted clipless Ford RS200 body (1) Velineon® VXL-3s brushless power system (1) 3500 mAh 2-cell LiPo battery (1) 2-amp USB-C charger with Traxxas iD® technology (1) TQi™ 2.4 GHz radio system with TSM® Optional pinion gear Maintenance tools and Quick Start Guide Specifications: Feature Details Scale 1/10 Mini Drive System Full-time 4WD Top Speed 40+ mph (2S) / 55+ mph (3S optional) Length 16.38 in (416 mm) Width 8.78 in (223 mm) Height 5.71 in (145 mm) Weight 4.04 lb (1.83 kg) Wheelbase 10.32 in (262 mm) Ground Clearance 0.83 in (21 mm) Radio System Traxxas TQi 2.4 GHz 2-Channel Steering Servo 2075X Metal-Gear Motor Velineon® 3500 Brushless ESC VXL-3s Waterproof ESC Battery Compartment 113 × 41 × 22 mm What You’ll Need: (4) AA alkaline batteries for transmitter (Optional) 3S LiPo battery for maximum speed (Optional) Power adapter #2912 and cable #2916 for faster charging

Read more less