Tear It Up—Without the Ballooning. Dominate dirt, grass, and loose terrain with confidence. The Pro-Line Badlands MX28 HP 2.8" Belted Tires bring unmatched traction and control with an aggressive motocross-inspired tread pattern. Pre-mounted on durable Raid 6x30 wheels, these tires are ready to rip and built to last. Tire Features: Molded-in herringbone weave high-performance belt prevents ballooning Aggressive MX-style tread for all-terrain grip—especially on loamy dirt, mud, and grass M2 compound for optimal balance of durability and grip Soft foam inserts included Made in the USA since 1982 Wheel Features: Raid 6x30 removable hex system – swap between narrow and wide 12mm offsets or upgrade to 14mm/17mm hexes Durable DuPont nylon construction Includes M3 x 12mm hex hardware Specs: Height: 5.02" (128mm) Width: 2.10" (53mm) Includes: (2) Pre-mounted Badlands MX28 HP 2.8" Tires on Raid 6x30 Black Wheels (2) 6x30 to 12mm Hex Adapters (Narrow & Wide) (12) M3 x 12mm Screws

Read more less

Rear grip you can trust. The Avid Sweeper 2.2” Rear was designed for racers who want strong forward drive and dependable side bite without the rear feeling edgy or unpredictable. Built around an aggressive arched chevron pin layout, this tire keeps the back of the car planted whether you’re powering out of a corner or carrying speed through long sweepers. Push harder. Stay confident. Repeat every lap. 🏁 Compounds A3 Medium (Green) Ideal for high-bite office carpet Great for tracks that allow traction compound Excellent longevity for long practice days Balanced grip and wear A4 Soft (Red) Designed for lower-bite CRC, Beach, and EOS-style carpets Ideal where traction compound is not allowed Maximum forward and steering grip Slightly increased wear for peak performance 🛠 Design Details That Matter ✔ Arched Chevron Pin Layout Engineered for exceptional side bite and stability under load. The design keeps the rear planted through long sweepers and high-speed transitions. When you lean on it, it stays planted. ✔ Directional Design These tires are directional — the center tip of the chevron points toward the car. To eliminate mounting mistakes, directional arrows are integrated into the debossed Avid sidewall logo so you can confidently mount them correctly every time. ✔ Debossed Sidewall Logos No raised lettering to grab carpet fibers No glue cracking around logos Clean, consistent sidewalls ✔ Wide-Base Pin Structure Each pin features a larger base for improved support under load, creating predictable side bite and consistent rear grip when throttle control matters most. ✔ Soft Grey Foams Included Includes soft grey foams (recommended trim width: 35mm). Trimming improves: Stability on sideways landings Corner forgiveness Side bite consistency Overall rear confidence If you’re building a carpet setup that rewards aggression while staying stable, the Avid Sweeper Rear delivers planted rear grip you can rely on every lap.    

Read more less

The JConcepts Hazard 12mm Hex Front Wheels are a proven race-winning option for the Traxxas Slash platform. Designed specifically for the front position, these wheels combine classic styling with modern performance and durability demanded by today’s short course racing. The Hazard wheel features a bold 10-spoke design with bead-lock styling and center lug nut detail, blending old-school inspiration with championship-level engineering. This wheel isn’t just about looks—it earned Top Qualifier and 1st Place at the 2011 ROAR Off-Road Nationals in Pro 2 Modified, driven by Ryan Maifield, dominating qualifying and main events. Careful attention was given to wheel profile, ribbing, spoke structure, and clearance to deliver the ideal balance of strength, lightweight performance, and consistent handling. The one-piece construction keeps things simple, reliable, and race-ready. Features Original JConcepts Hazard 12mm hex wheel design Direct bolt-on fit for Traxxas Slash (Front) Lightweight, durable one-piece construction Optimized wheel profile for strength and clearance Matte face finish for easy paint matching Championship-proven race performance Color Options Black White Yellow Fitment Traxxas Slash – Front only 12mm Hex Short Course applications Includes (2) JConcepts Hazard 12mm Hex Front Wheels A classic look backed by proven results—these wheels deliver race performance with unmistakable JConcepts style.  

Read more less

🏁 Maximum Front Grip. Wide Stability. Carpet Racing Performance. Take your 2WD buggy handling to the next level with the JConcepts Pin Swag LP Wide Front Tires. Combining the proven side lug design of the Swagger front tire with a dense pin layout, the Pin Swag delivers exceptional steering precision, stability, and corner speed on today's high-bite carpet tracks. Pre-mounted and race-ready, these wide-profile front tires feature a larger contact patch for increased grip and smoother handling while the lightweight carcass design helps keep your buggy responsive and consistent throughout the race. ⚡ Features: 🏁 Pre-mounted and ready to race right out of the package🛞 Wide-body carcass design for increased front-end grip⚙️ Pin Swag combination tread pattern for superior steering response🎯 Dense pin layout helps reduce tire wear and maintain consistency💪 Hefty base pins with crisp edges for maximum bite🔧 Low-profile design improves handling precision⚡ Ultra-lightweight scalloped tire bead reduces rotating mass🚀 Optimized specifically for 2WD buggy front applications 📦 Includes: (2) JConcepts Pin Swag LP Wide 2.2" Pre-Mounted 2WD Front Buggy Tires 📏 Specifications: Part Number: JCO4062Wheel Size: 2.2"Position: FrontApplication: 2WD BuggySurface: CarpetCompound: PinkHex Size: 12mmMounting: Pre-Mounted 🔧 Perfect For: 🏁 Carpet Off-Road Racing🚗 Team Associated B6 Series🚗 Team Associated B7 Series🚗 TLR 22 Series🚗 Schumacher 2WD Buggies🚗 Most 1/10 2WD Race Buggies with 12mm Hex Front Wheels 💡 Pro Tip: The Pin Swag has become a go-to front tire for high-grip carpet racing because it provides aggressive steering without becoming overly twitchy. Pair them with JConcepts Ellipse, Fuzz Bite, or Carpet Web rear tires for a balanced and confidence-inspiring setup. 🏁🔥🛞

Read more less

Loctite Super Glue Professional Liquid 20g

Read more less

The Team Associated 2.2" Front Buggy Wheels (White) are optional replacement wheels designed for 1/10 scale buggies using a 12mm hex setup. Built from durable nylon material, these wheels provide a strong yet lightweight solution for competitive racing. Designed for use with the Associated B4 and B4.1 when equipped with a 12mm hex conversion, these wheels offer reliable fitment and consistent performance on a variety of track surfaces. Features Genuine Team Associated optional wheels 2.2" front buggy wheel design 12mm hex fitment Durable white nylon construction Lightweight and race-ready Includes (2) 2.2" Front Buggy Wheels (White) Compatibility Team Associated B4 (with 12mm hex conversion) Team Associated B4.1 (with 12mm hex conversion) A dependable front wheel option built for strength, consistency, and competitive performance. 🏁  

Read more less

  The ProTek RC 1/10 Buggy Tire Bag is a convenient way to haul and preserve your tires, as well as anything else that fits inside one of six included, airtight 6.5" tall, 3.5" diameter screw on lid storage tubes. The bag itself is made from heavy duty nylon material and measures 12.75" wide, 8.25"deep and 7.5" tall. The lid of the bag features a large ProTek RC logo in white, and has a 12x7.5" mesh zippered pocket on the inside providing a place to stash setup sheets, tools or other small accessories that may come in handy at the track. If you are serious about keeping your gear neat and tidy, this bag is a must have accessory. Features:  Perfect for 1/10 Buggy and On Road Six airtight 6.5" tall, 3.5" diameter PET tubes with screw on lid Heavy duty nylon material  Bag measures 12.75" wide, 8.25"deep and 7.5" tall Internal 12x7.5" mesh zippered pocket 

Read more less

Treal Hobby Type K 1.0" 12-Hole Beadlock Classic Vintage Wagon Wheels (Black, Bronze, Grey, Silver) (4) – 28.9g Each Give your micro crawler that scale vintage flair with Treal Hobby's Type K 1.0" Classic Wagon Wheels. These beadlock rims are CNC machined from aluminum and feature interchangeable brass center rings for added weight and realism. Each set adds a total of 115.6g of unsprung weight down low—improving traction, crawling stability, and overall performance. Offered in four sleek finishes—Black, Bronze, Grey, and Silver—these wheels let you customize your rig’s style while maintaining premium durability and functionality. Features: Classic 12-hole vintage design Beadlock for easy mounting—no glue needed CNC-machined aluminum construction Brass center ring for added weight and balance Removable hex hub for offset tuning and customization Available in Black, Bronze, Grey, and Silver Adds 115.6g total weight (28.9g per wheel) Specifications: Application: 1/24 & 1/18 Micro Crawlers Outer Diameter: 1.22in (31mm) Wheel Diameter: 1.0in (25.4mm) Width: 0.5in (12.7mm) Hex Hub: 7mm (0.275in) Weight (each): 28.9g assembled Includes: (4) Type K 1.0" Beadlock Wheels in your choice of finish Brass center rings Removable hex hubs Upgrade your mini crawler’s looks and performance with the scale detail and rock-solid grip of Treal Hobby's Type K wheels.

Read more less

Pro-Motion Viper 2.2" Slim 2WD Front LP Carpet Buggy Tires (2) — C4 Red (Soft Compound)Part #: 3070-C4 Precision Steering. Peak Grip. Podium Ready. The Pro-Motion Viper Slim 2WD Front Tire is engineered for high-bite indoor tracks, delivering precise steering response with its low-profile carcass and directional tread. The soft C4 Red compound gives you the edge in low-grip or cooler track conditions, while the tapered mini pin layout and dual outer wedges help maintain control in high-speed corners and through bumps. ✅ Slim profile designed for 2WD front buggies✅ Low-profile sidewall for reduced flex and sharper feel✅ C4 Red soft compound for aggressive front-end grip✅ Directional tread for tunable steering response✅ Optimized for carpet and turf tracks 📦 Includes:(2) Viper 2.2" Slim 2WD Front LP Carpet Tires 💡 Pro Tip: Match with C4 Viper rears for balanced handling and maximum traction.

Read more less

PN Racing Mini-Z 2WD Machine Cut 10 Spoke Rear Wheel R14mm New design Mini-Z 2WD Wheel with 2pcs in pack.Machine CutMaterial Special ABS plastic.

Read more less

This is a pair of two Traxxas Short Course Truck Tires. Improve the traction and handling of your Slash, Slayer,and Slash 4X4 with race-proven performance. Available in standard and race proven "S1" soft compounds, this tire provides traction and control on all tracks. Standard compound is a long wearing rubber blend that will stand up to abuse on concrete and pavement, while S1 compound delivers precise steering and incredible grip for the Slash 4X4, and is ideal for improving rear bite on the 2WD Slash.S1 Racing Compound Tire Features Race-proven, soft-compound rubber improves traction and cornering grip Realistic Traxxas Short Course tread pattern Performance tuned foam inserts included Available unmounted in pairs, or mounted on satin-chrome Slash wheels with color-molded red beadlock-style trim Direct fit for Slash and Slash 4X4 with specific front and rear rim offsets Also available with 14mm hub for Traxxas Slayer COMPATIBILITY: Traxxas Nitro SlashTraxxas Slash 2wdTraxxas Slash 4x4Traxxas Telluride 4x4

Read more less

Dial in smooth corner exits with the Marka V1 Super Soft Rear Tires, delivering excellent grip without excessive wear. ✅ Super Soft Compound (10°) – Ideal mix of traction and control✅ 14mm Rear Size – Stable, planted handling✅ Built for competitive Mini-Z racing Part #: MZR-V1RR10-14Includes: 1 pair (2 tires)  

Read more less

🛞 Bigger. Tougher. More grip. The Traxxas Sledgehammer 2.8" Tires deliver extreme off-road traction and control for your Rustler 4x4, Hoss 4x4, or Stampede 4x4. The open-block tread pattern bites into loose surfaces, while the increased tire diameter boosts ground clearance for tackling rough terrain. Pre-mounted on durable black wheels with a 12mm hex, these tires are ready for high-impact action right out of the package. ✅ Extreme off-road tread for superior grip✅ Larger diameter for added ground clearance✅ Open block design sheds mud & debris✅ Pre-mounted on 12mm hex black wheels✅ TSM®-rated for high-speed use 📦 Includes:• (2) Pre-Mounted Sledgehammer 2.8" Tires on Black 12mm Hex Wheels 🔧 Vehicle Compatibility:• Traxxas Hoss 4x4• Traxxas Rustler 4x4• Traxxas Stampede 4x4  

Read more less

  Compound Options: Super Soft • Soft • Medium • Hard Experience race-proven grip and consistency with the PN Racing KS-M Compound Low Profile Slicks—engineered for RCP tracks and cool-temperature performance. These precision-molded slick tires offer rapid warm-up, instant traction, and long-lasting balance throughout your run. After months of R&D, PN Racing has perfected this 1.6 mm low-profile tire design for unmatched feel and cornering stability. Whether you’re competing in stock or modified classes, these slicks deliver smooth control, durability, and the confidence to push every lap. ⚙️ Features: KS-M compound provides quick warm-up and consistent grip, even in cooler conditions Low-profile 1.6 mm design reduces sidewall flex for sharper handling Optimized for RCP track surfaces Mounts directly to 20 mm rims (23.2 mm mounted diameter) Excellent wear life and predictable break-in behavior Ideal for stock or advanced racing classes 📊 Specifications: Tire Type: Slick (Low Profile) Width: 11 mm Thickness: 1.6 mm Mounted Diameter (on 20 mm rims): 23.2 mm Compound Options: KSM630 – Super Soft 🟣 KSM634 – Soft 🔵 KSM638 – Medium 🟢 KSM642 – Hard 🟠 Recommended Surface: RCP foam track 📦 Includes: (2) PN Racing KS-M Compound 11 mm Low Profile Slick Tires 💡 Pro Tip:No truing required for stock class — just one battery pack of runtime provides a perfect break-in. For advanced racers, true only 0.1 – 0.2 mm of the surface to unlock ultimate balance and precision grip.

Read more less

Complete your Mini-Z setup with PN Racing’s machine-cut 16-spoke rear wheels, built for 2WD Mini-Z platforms. Designed to pair perfectly with the matching fronts, these rears deliver durability, precision, and a race-ready look. Available in Yellow, Black or White, with multiple offsets to fine-tune your stance and handling. ✅ Machine Cut Precision – Lightweight and true for smooth, consistent traction✅ 16-Spoke Rear Design – Classic race styling with added strength where it counts✅ Multiple Offsets (R0–R3) – Dial in your rear track width for optimal grip✅ Color Options – Bold Yellow or Crisp White to match your build Lock in performance and style with PN Racing’s 16-Spoke Rear Wheels — the perfect finish to your Mini-Z racing setup.

Read more less

The PN Racing V2 Tire Gluer Pro provides a fast and consistent way to glue Mini-Z tires with precision. Designed for convenience and accuracy, this tool helps evenly apply glue while holding the tire and wheel securely in place. The updated V2 design supports multiple wheel widths, making it compatible with 8.5mm, 11mm, and 14mm wheels for both 2WD and AWD Mini-Z setups. Perfect for racers looking for clean glue lines and consistent tire prep. 🔧 Features:• Quick and easy Mini-Z tire gluing solution• V2 updated design for improved usability• Holds tire and wheel securely while gluing• Supports multiple wheel widths• Helps create clean and consistent glue lines• Works with 2WD and AWD Mini-Z setups 📦 Includes:• (1) V2 Tire Gluer Pro ⚙️ Specifications:• Supported Wheel Widths: 8.5mm / 11mm / 14mm• Application: Mini-Z tire gluing  

Read more less

Built with one goal: predictable, repeatable steering that stays consistent. The Guardian 2.2” Slim Front was designed for racers who are tired of chasing front-end balance from run to run. After one proper break-in, this tire settles into its performance window — and stays there. No rollercoaster grip.No fading edge after a few heats.Just confidence, lap after lap. 🔄 A Break-In That Works For You Most front tires need to be “knocked down” to calm the initial edge. The Guardian works differently. The first run activates the tire rather than dulling it. First run: smooth, easy to drive, possibly slight push After break-in: steering comes alive Following runs: grip and feel remain remarkably consistent Where many fronts peak early and fade after 2–3 runs, the Guardian maintains its balance through the life of the tire. That means you tune once — and focus on driving. 🏁 Compounds A3 Medium (Green) Best for high-bite office carpet Great for tracks allowing traction compound Ideal for extended practice sessions Strong longevity with consistent grip A4 Soft (Red) Designed for lower-bite surfaces (CRC, Beach, EOS-style carpet) Ideal where traction compound is not allowed Maximum steering and forward grip Slightly higher wear for peak performance 🛠 Design Details That Matter ✔ Increased Sidewall (One Side) One sidewall is enlarged to calm initial edge and improve mid-corner stability. Mounted with the larger side outward, the result is confident turn-in without nervous steering. ✔ Debossed Logos No raised lettering to catch carpet fibers No glue cracking around sidewall branding Cleaner gluing and better long-term durability ✔ Larger, Tighter Pin Layout Maintains strong front traction Increases wear life Consistent grip without sacrificing durability If you value predictability, consistency, and confidence, the Guardian front tire delivers a planted, trustworthy feel that lets you focus on winning — not chasing setup changes.  

Read more less

Get smoother, more consistent handling by properly balancing your wheels with the AKA Wheel Balancing Clay. Designed as a replacement stick for the AKA Hand Held 1/8 Off-Road Wheel Balancer (AKA44001), this clay is easy to mold and perfectly suited for fine-tuning wheel rotation on both off-road and on-road RC vehicles. A small amount placed on the high spot of a wheel dramatically improves balance, reduces vibration, and enhances performance—especially at high speeds. Key Features Replacement balancing clay for the AKA 1/8 Off-Road Wheel Balancer Easily moldable for precise weight placement Suitable for almost any RC wheel, on-road or off-road Improves wheel balance, reduces vibration, and increases stability Large clay stick: approx. 5" long × 1" wide × 1" high Includes (1) Stick of AKA Wheel Balancing Clay

Read more less

Compounds: Super Soft • Soft • Medium • Hard Get race-winning consistency with PN Racing’s KS Compound RCP Slicks, engineered for precision performance on Mini-Z RCP tracks. The KS compound delivers progressive grip that increases as tire temperature rises, giving you confident traction through every corner. Designed in an 11mm width, they’re perfect as front tires when paired with 14mm rears — or as balanced rears for lighter setups. ⚙️ Features: KS Compound provides more grip as tires warm up for consistent performance Ideal for RCP track surfaces and cold-to-moderate climates Low-profile 1.6mm design reduces flex for sharper steering 11mm width — excellent for front tires when using 14mm rears Long-lasting, stable feel with minimal break-in required 📏 Specifications: Tire Width: 11mm Thickness: 1.6mm Recommended Use: Front tire when using 14mm rears Track Type: RCP foam track Fitment: Mini-Z MR-03 / MR-04 / MR-015 / MR-02 and compatible chassis 🧪 Compound Options: KS2130 – Super Soft (30 Shore) 🟣 Maximum traction, best in cooler temps KS2134 – Soft (34 Shore) 🔵 Balanced grip for general conditions KS2138 – Medium (38 Shore) 🟢 Stable and smooth on warm tracks KS2142 – Hard (42 Shore) 🟠 Long-wearing, ideal for hot or high-grip surfaces 📦 Includes: (2) PN Racing KS Compound 11 mm Slick Tires 💡 Pro Tip:Pair 11 mm KS fronts with 14 mm rears to fine-tune steering response and rear-end stability — the perfect setup for Mini-Z racers chasing consistency and corner speed.  

Read more less

Unmatched Grip. Proven Performance. Engineered for RCP tracks and fine-tuned through extensive testing across the USA, the Reflex Racing 11mm Radial Tire (30°) delivers elite-level traction, corner stability, and forward bite. Designed from the ground up for competitive Mini-Z racers, this tire provides consistent performance and superior control lap after lap — trusted by both pros and weekend racers alike. Advanced Radial Design Unlike traditional directional tires, the Reflex Racing Radial features a non-directional tread pattern precision-cut directly into the slick — not molded over it. This design reduces tread flex under load, resulting in incredible stability during rotation and enhanced exit traction. Even as the tread wears down, performance remains sharp and consistent for longer track life. Optimized for Corner Speed The 11mm tire is 25.25mm in diameter (when mounted with super glue), optimized for maximum corner speed and smooth rotation. The 30° compound performs across a wide temperature range — from 45°F to 80°F — maintaining reliable grip in changing track conditions. For ultra-high grip environments, simply trim the tire for more rotation in tight corners. Features: Designed specifically for RCP track surfaces Non-directional radial tread for even wear and stable handling Superior cornering stability and exit traction Long-lasting 30° compound performs even after visible tread wear Optimized 25.25mm diameter for faster corner speed Proven performance by racers nationwide Includes: (2) Reflex Racing 11mm Radial Tires – 30°(Wheels not included; shown for reference only) Reflex Racing — Precision. Performance. Proven.

Read more less

Add style and performance to your Mini-Z with the PN Racing 16-Spoke Machine Cut Rear Wheels. Crafted from durable ABS plastic and precision cut for accuracy, these wheels deliver consistent fitment and lightweight strength — perfect for serious Mini-Z racers. ✅ Machine-cut 16-spoke design for precision and strength✅ Made from special ABS plastic for durability✅ Rear wheel fitment, 14mm radius (R14mm)✅ Available in Yellow (216YR14) or White (216WR14)✅ Includes 2 wheels per pack Give your Mini-Z 2WD an upgrade in both looks and performance with PN Racing’s high-quality rear wheels.

Read more less

The LC Racing L5071 Jetgo Mini Buggy Front Tires are designed for precision handling and durability on your 2WD buggy. Pre-mounted on white rims and featuring a 50° yellow dot compound, these tires provide excellent grip, consistency, and easy installation. ✅ 50° Yellow Dot Compound – Balanced performance and durability for racing✅ Pre-Mounted Convenience – Ready to install on white rims, no gluing required✅ Precision Fit – Designed for LC Racing Jetgo Mini Buggy 2WD front wheels✅ Durable Construction – Long-lasting compound built for competitive use Includes: (2) Pre-Mounted Jetgo Mini Buggy 2WD Front Tires (50° Yellow Dot, White Rim) Compatibility: LC Racing Jetgo Mini Buggy 2WD Check manual for exact fitment on other models Part #: L5071

Read more less

Upgrade your Mini-Z with PN Racing’s Machine Cut Delrin 20mm Front Wheels. Made from strong Delrin material with a reinforced sidewall, these wheels are tougher and more durable than the first version — perfect for racers who demand consistent performance. ✅ 20mm Diameter – Same size as standard Mini-Z wheel rims✅ Reinforced Sidewall – Thicker design for added strength and durability✅ Machine Cut Precision – True and lightweight for smooth, stable handling✅ Offset Options – Available in F0, F1, and F2 to fine-tune your setup Part Numbers: MR2076F1N - Offset F-1 MR2076F0 – Offset F0 MR2076F1 – Offset F1 MR2076F2 – Offset F2 Strong, lightweight, and race-ready — PN Racing’s Delrin 20mm Front Wheels are the perfect upgrade for your 2WD Mini-Z.

Read more less

  Traxxas BFGoodrich® Mud-Terrain™ T/A® KM3 Tires (2.4x1.0") – Part #9868🛞 Real Looks. Real Grip. Ready to Crawl. Upgrade your TRX-4M with officially licensed BFGoodrich® Mud-Terrain™ T/A® KM3 tires for unbeatable traction and scale realism. These 2.4x1.0" tires are perfect for conquering trails, rocks, and mud — just like the real thing. ✅ Officially licensed BFGoodrich® tread pattern✅ Molded in a high-traction rubber compound✅ Perfect scale detail with aggressive off-road look✅ Compatible with TRX-4M 1/18 scale vehicles 📦 Includes: (2) BFGoodrich® Mud-Terrain™ T/A® KM3 Tires (2.4x1.0")

Read more less

Pro-Motion 2.2" Rear Buggy Wheels (4)Available in White (3050-W) or Yellow (3060-Y) Engineered for Speed. Built to Dominate. Give your buggy the winning edge with Pro-Motion’s 2.2" Rear Wheels, designed for today's high-traction tracks. These wheels feature a reinforced inner rib structure for added durability without the weight penalty. The lightweight design and precision molding ensure a true, balanced rotation—exactly what you need for consistent traction and razor-sharp control. ✅ Fits most 1/10 scale buggies with 2.2" rear wheels✅ Lightweight inner rib design for enhanced strength✅ High-durability construction for racing abuse✅ Built-in vent holes reduce tire distortion✅ Available in sleek White or Fluorescent Yellow 📦 Includes:(4) 2.2" Rear Buggy Wheels 💡 Pro Tip: Match with Pro-Motion front wheels for a full performance setup that looks as good as it drives.

Read more less

Keep your tires protected, organized, and race-ready with the ProTek RC 1/10 Buggy Tire Tube. This airtight storage tube measures 6.5" tall with a 3.5" diameter, making it ideal for both 1/10 buggy and on-road tires. Molded from lightweight, durable PET, these tubes are perfect for storing mounted or unmounted tires, and they serve as direct replacements for the tubes included with the ProTek 1/10 Buggy Tire Bag. Includes one clear tube and one screw-on airtight cap. ⭐ Features Perfect size for 1/10 Buggy and 1/10 On-Road tires Airtight design with a secure screw-on lid Lightweight and durable PET construction Great for storage, transport, or organizing spares Replacement tube for the ProTek 1/10 Buggy Tire Bag 📦 Includes (1) Tire storage tube (1) Screw-on cap ⚠️ Note Storage bag shown in photos is not included.

Read more less

Dial in elite front-end grip and laser-precise steering with the JConcepts 3DP 2.2" 2WD Front Carpet Tires — engineered for maximum consistency, control, and performance on today’s high-traction carpet tracks. Developed from the winning heritage of the Fuzz Bite and 3D series, the 3DP fronts bring a refined pin layout, low-profile carcass, and enhanced sidewall support to give racers the steering feel they need without sacrificing stability. Revolutionary Carpet Steering Precision The 3DP front tires are built around a super-stacked micro pin layout that delivers incredible forward bite and immediate steering response.The tread uses: Reverse “water tower” micro pins for improved bite Radial ribs & directional sidewall lugs for balanced steering Low-profile carcass to keep the buggy flat and predictable This combination gives drivers the confidence to push harder through corner entry, mid-corner, and exit. Engineered for Consistency & Performance Sliced outer traction bars add flexibility and smoothness on fast transitions, while the open outer pin spacing helps shed carpet fuzz and maintain crisp traction over long race days. Scalloped beads reduce rotating mass for quicker acceleration and enhanced steering feel — and mounting is seamless on standard 2.2” JConcepts wheels. Features Low-profile carcass for precision steering and stability Super-stacked micro pin layout for maximum grip Reverse “water tower” pins enhance traction & tire life Cut & sliced outer bars improve flexibility in corners Open outer pin spacing reduces debris buildup Radial ribs and directional sidewall lugs for balanced handling Lightweight scalloped beads reduce rotating mass Designed to fit popular 2.2” JConcepts wheels Includes (2) JConcepts 3DP 2.2" 2WD Front Buggy Carpet Tires (Pink) (2) Foam Inserts

Read more less

Unleash pro-level traction on high-grip carpet with the JConcepts 3DP 2.2" Rear Buggy Tires — engineered for racers who demand maximum grip, predictable feel, and long-lasting consistency on modern artificial surfaces. Building on the legendary lineage of the JConcepts 3D series, the 3DP introduces advanced tread geometry, a low-profile carcass, and optimized pin layout to deliver elite performance for competitive 1/10 off-road carpet racing. Next-Generation Carpet Control The 3DP combines: Dense center pins for maximum forward grip Reverse “water tower” micro pins (borrowed from the Fuzz Bite) for increased bite and reduced wear Cut and sliced outer traction bars that flex for smooth corner transitions Radial sidewall ribs for improved stability during high-speed direction changes Together, these features provide the perfect balance of steering predictability, driveability, and acceleration on EOS-style carpet tracks. Engineered for Speed & Consistency The low-profile carcass helps the buggy stay flatter through turns, giving you stability and faster corner rotation. Scalloped tire beads remove unnecessary weight, improving acceleration and reducing rotating mass. Open spacing on the outer pins helps the tire shed debris, extending the usable lifespan while keeping the tread sharp across long race days. Features JConcepts original 3DP performance design Low-profile carcass for stable, controlled handling Dense center pin layout for maximum bite Reverse "water tower" micro pins enhance grip and wear life Sliced outer bars add flexibility and cornering feel Radial ribs on the sidewall improve balance and predictability Openly spaced outer pins reduce debris buildup Scalloped tire beads reduce rotating weight Includes open-cell medium foam inserts Includes (2) JConcepts 3DP 2.2" Rear Buggy Carpet Tires (Pink Compound) (2) Open-Cell Medium Foam Inserts    

Read more less

  ⚙️ Versatile Hex Adapter Set for 6x30 WheelsUpgrade your setup with the Pro-Line 6x30 to 12mm Hex Adapters, designed for Pro-Line’s Raid Removable Hex Wheels. This set includes both narrow and wide 12mm hexes, giving you perfect compatibility across multiple Traxxas® 2WD and 4WD platforms. Made from high-strength DuPont nylon, these adapters are engineered to withstand the demands of intense RC action. 🌟 Features Replacement Narrow and Wide 6x30 → 12mm Hex Adapters Compatible with all Pro-Line 6x30 Removable Hex Wheels Narrow hexes: fit Stampede®/Rustler® 2WD rear Wide hexes: fit Stampede®/Rustler® 2WD front and Stampede®/Rustler® 4x4 front & rear Made from high-strength, durable DuPont black nylon Built to take a beating in tough off-road conditions Made in the USA since 1982 📦 Includes (2) Narrow 12mm Hexes (for 2WD rear) (2) Wide 12mm Hexes (for 2WD front and 4WD front/rear) ✅ Compatibility Pro-Line 6x30 2.8" Removable Hex Wheels Traxxas Stampede® 2WD Traxxas Rustler® 2WD Traxxas Stampede® 4x4 Traxxas Rustler® 4x4 🧠 Pro-Line quality meets Traxxas toughness — perfect fit, premium materials, and made to last!  

Read more less

Dominate any surface with the UpGrade RC Micro Razor Wire 1.0" Class 1 Extreme Performance Tires — built for serious crawlers who demand maximum traction and control on unpredictable terrain. Designed for loose dirt, gravel, mud, and technical obstacles, these tires feature an aggressive open-lug tread for superior grip and self-cleaning performance. ✅ Aggressive Open-Lug Tread – Alternating lug sizes bite into loose terrain for powerful traction✅ Self-Cleaning Design – Prevents debris buildup for consistent grip run after run✅ Super Soft Compound – Conforms to rocks and obstacles for ultimate control✅ Trail & Comp Ready – Engineered for both scale realism and competitive performance✅ Side Lug Reinforcement – Delivers improved sidehill traction and corner stability✅ Pre-Installed Foam Inserts – Soft inserts maintain shape and optimize ground contact Specifications: Outer Diameter: 2.24" (57mm) Inner Diameter: 1.0" (25.4mm) Width: 0.89" (22.77mm) Includes: (2) UpGrade RC Razor Wire 1.0" Tires (2) Pre-Installed Soft Foam Inserts Compatibility: Axial SCX24 Furitek Cayman Furitek Cayman Pro Furitek FX118 HPI Venture 18 HobbyPlus CR-18 Losi Micro Rock Crawler Redcat Ascent-18 Traxxas TRX-4M ⚡ Grip harder, climb higher — the Razor Wire delivers competition-grade traction for micro crawlers that refuse to quit.

Read more less

Pro-Motion 2.2" 2WD Front Slim Carpet Buggy Wheels (4)Available in Yellow (3080-Y) or White (3070-W) Precision on the Carpet. Built for Grip. Dial in your buggy for high-traction carpet tracks with Pro-Motion’s 2.2" Slim Front Wheels. These lightweight wheels are engineered with a reinforced inner rib design to reduce flex without adding unnecessary weight. The tough plastic construction holds up under pressure, while integrated vent holes keep performance sharp through long mains. ✅ Perfect fit for 2WD front carpet setups✅ Slim profile design tailored for high-grip surfaces✅ Ultra-lightweight ribbed structure for strength without bulk✅ Built-in vent holes reduce tire ballooning✅ Available in bright Fluorescent Yellow or Clean White✅ Includes 12mm hex mounting 📦 Includes:(4) 2.2" Slim Front Carpet Buggy Wheels (choose Yellow or White) 💡 Pro Tip: Pair with low-profile carpet tires for the ultimate precision and responsiveness on tight indoor layouts.

Read more less

Get reliable grip and long-lasting performance with the PN Racing KSK Compound RCP Slick Tires. Designed for Mini-Z racing on RCP-style surfaces, these 11mm slicks deliver smooth traction and consistent handling. Available in multiple compounds, these tires allow you to fine-tune traction for different track conditions. Softer compounds provide more grip, while harder compounds offer improved durability and smoother driving characteristics. 🔧 Features:• KSK compound for strong grip and long life• Slick tire design for RCP track performance• 11mm width for Mini-Z applications• Consistent and predictable traction• Laser marked part number inside tire• Multiple compounds for tuning performance 📦 Includes:• (2) RCP Slick Tires ⚙️ Compound Options:• 30 Shore – Soft (more grip)• 35 Shore – Medium• 40 Shore – Hard (longer life) ⚙️ Specifications:• Width: 11mm• Surface: RCP• Quantity: 2 Tires    

Read more less

🛞 Maximum Bite for Micro-Scale Crawling Built specifically for the SCX30 platform, these INJORA 0.7" Swamp Claw tires deliver aggressive traction in a true micro footprint. The open tread and claw-style sidewalls shine on loose dirt, wet rock, and technical climbs where grip really matters. Important Fitment Note ⚠️ Designed and tested exclusively with INJORA 0.7" wheels.Fitment with other brand wheels is not guaranteed due to design and tolerance differences. Compatibility ✔ Axial SCX30 (1/30 scale)✔ INJORA 0.7" wheels Key Features • Molded in INJORA S5 Super Soft & Sticky compound• Aggressive open tread for strong bite in mud and loose terrain• Pronounced center lugs for consistent forward traction• Claw-style sidewall lugs improve grip when side-hilling• Optimized size for true 1/30 scale performance Specifications Part Number: T7019Tire Compound: INJORA S5Outer Diameter: 36mmWidth: 14mmWeight (Each): 2.8g Package Includes (4) INJORA 0.7" Swamp Claw Tires Pro Tip 💡 Pair these with brass 0.7" wheels to keep the center of gravity low and really let the S5 compound do its thing on steep or slippery lines.    

Read more less

  🏁 High-Precision Touring Car Wheels for Consistent PerformanceThe Yokomo 12mm Hex Precision Medium Narrow Touring Car Wheels deliver accuracy, balance, and strength — essential for competitive 1/10 scale touring car racing. Designed with Yokomo’s signature precision molding, these wheels provide perfect roundness, optimal stiffness, and a consistent mounting surface for your tires, ensuring smooth and predictable handling on every lap. ⚙️ About the Yokomo Medium Narrow Wheels With a 24mm width and 0mm offset, these wheels are ideal for a wide range of track conditions, offering excellent rigidity while maintaining the flex needed for consistent grip. The durable composite material resists deformation under high cornering loads, helping you maintain consistent traction and speed through the turns. 🌟 Features Precision-molded 24mm wheels for smooth and accurate rotation 0mm offset for standard touring car fitment Medium narrow design ideal for both carpet and asphalt tracks Durable composite construction resists flex and deformation 12mm hex fitment for universal compatibility White finish for a clean, professional look 📦 Includes (4) Yokomo 12mm Hex Medium Narrow Touring Car Wheels (White) 🚗 Compatibility Yokomo BD10 Yokomo BD7 (Original, 2014, 2016) Yokomo BD8 (2017, 2018) Yokomo RS1.0 Fits most 1/10 scale touring cars with 12mm hex hubs ⚡ Trusted by top racers worldwide — Yokomo Precision Touring Car Wheels deliver the stability, balance, and quality your setup deserves.

Read more less

Enhance the performance and control of your micro crawler tires with the UpGrade RC 1.0" Dual Stage Foam Inserts. Designed for 1.0" Class 2 crawler tires, these inserts deliver the perfect balance of flexibility and support — allowing your tires to conform to terrain while maintaining sidewall strength and stability. ✅ Dual Stage Design – Soft outer foam for terrain conformity, firm inner foam for structure and control✅ Improved Sidewall Support – Prevents tire collapse under heavy loads✅ Consistent Ground Contact – Maximizes traction and performance on uneven terrain✅ Perfect Fit for 1.0" Micro Crawler Tires – Ideal for both trail and comp setups✅ Durable Closed-Cell Inner Foam – Maintains shape longer and resists moisture absorption Specifications: Outer Diameter: 57mm (2.24") Inner Diameter: 1.0" (25.4mm) Configuration: Dual Stage (Soft Outer / Firm Inner) Includes: (2) UpGrade RC 1.0" Micro Crawler Dual Stage Foam Inserts Compatibility: Axial SCX24 Furitek Cayman Furitek FX118 HPI Venture 18 HobbyPlus CR-18 Losi Micro Rock Crawler Redcat Ascent-18 Traxxas TRX-4M ⚡ More control, more traction — UpGrade RC dual-stage foams give your crawler the edge where it counts.    

Read more less

Take your Mini-Z performance to the next level with PN Racing’s Machine Cut 5H Delrin Wheels. Designed for strength and ultra-lightweight performance, these precision-cut wheels are built for racers who want maximum efficiency and handling. ✅ Ultra Lightweight – Just 0.8g (Front) and 0.9g (Rear) for reduced rotating mass✅ Strong Cut Design – Reinforced 5H structure provides durability without extra weight✅ Delrin Construction – Tough, smooth-running material for consistent performance✅ Versatile Options – Available in multiple offsets for perfect tuning Available Sizes: Front: F0, F3 Rear: R0, R1 Pan Car: 14.5mm width Color: White Lightweight, durable, and precision cut — PN Racing’s 5H Delrin Wheels deliver smoother handling and faster response for serious Mini-Z racers.

Read more less