Team Associated Factory Team B6.4/B6.4D 3.5x48mm Titanium Turnbuckles. These are optional titanium turnbuckles intended for the Team Associated B6.4 and B6.4D platforms. Constructed from high quality titanium these offer increased durability over stock components. Package includes two 3.5x48mm turnbuckles. NOTE: 3.5mm Ballcups are required for installation (ASC92308). COMPATIBILITY: Team Associated RC10B6.4Team Associated RC10B6.4D

Read more less

Team Associated Factory Team 3.5mm Titanium Turnbuckle Set. This is an optional titanium turnbuckle set intended for the Team Associated B74.2 platform. Constructed from high quality titanium these offer increased durability over stock components and replace all the stock turnbuckles.Includes: (2) 3.5x45mm Titanium Turnbuckles (4) 3.5x42mm Titanium Turnbuckles (1) 3.5x35mm Titanium Turnbuckle COMPATIBILITY: Team Associated RC10 B74.2Team Associated RC10 B74.2D

Read more less

Team Associated 13mm Front Shock Spring. These optional springs are intended for the Team Associated B6.4D and the B6.4. Package includes two springs. Effects of Shock Spring Changes  Shock Spring  Characteristic  Softer Increased Chassis Roll Increased Traction Better in Bumpy Conditions More Likely to Bottom Out  Stiffer Decreased Chassis Roll Decreased Traction Increased Responsiveness COMPATIBILITY: Team Associated RC10 B74.2Team Associated RC10 B74.2DTeam Associated RC10B6.4Team Associated RC10B6.4D

Read more less

The Team Associated B6 Front Hinge Pin Brace is a genuine replacement part designed to restore strength and alignment to the front suspension of your RC10 platform. Precision-molded for a direct factory fit, this brace securely holds the front hinge pins in place, helping maintain consistent suspension geometry and reliable handling. Ideal for maintenance, rebuilds, or replacing damaged components after hard racing or bashing, this hinge pin brace installs easily and keeps your front end tight and predictable. Features: Genuine Team Associated replacement part Maintains proper front suspension alignment Durable construction for racing and off-road use Direct drop-in fit with no modifications required Includes: (1) Front Hinge Pin Brace Compatibility: Team Associated RC10B6 Team Associated RC10B6D Team Associated RC10B6.1 Team Associated RC10B6.1 Factory Lite Team Associated RC10B6.1D Team Associated RC10B6.2 Team Associated RC10B6.2D Team Associated RC10B6.3 Team Associated RC10B6.3D Team Associated RC10B6.4 Team Associated RC10B6.4D Team Associated RC10 SC6.1 Team Associated RC10 T6.1

Read more less

This is a Team Associated "B" Arm Mount, intended for use with the Team Associated RC10 B74 Team 1/10 4WD Off-Road Electric Buggy to replace the kit supplied rear "B" Arm Mount. This contains one anodized blue arm mount. COMPATIBILITY: Team Associated RC10 B74 OriginalTeam Associated RC10 B74.1Team Associated RC10 B74.1DTeam Associated RC10 B74.2Team Associated RC10 B74.2D

Read more less

Upgrade your RC10B74's steering performance with the 9-degree Caster Blocks from Team Associated. Designed for precision and durability, these caster blocks deliver improved cornering stability and increased on-power steering response. 🛠️ Key Features: 9° caster angle for improved handling characteristics Factory Team quality with tight manufacturing tolerances Durable composite construction Direct fit for RC10B74 front suspension 📦 Includes: (1) Pair of 9° Caster Blocks (left & right) ✅ Compatibility: Team Associated RC10B74 and variants (check manual for specific fitment) Ideal for racers looking to fine-tune front-end geometry to suit different track conditions. A must-have tuning option for competitive setups.

Read more less

Optimize rear-end stability and durability with the RC10B6.2 Rear Hubs from Team Associated. Designed for high-performance racing, these molded composite hubs provide the perfect balance of strength, adjustability, and weight for 1/10 scale 2WD competition buggies. 🔥 Key Features: Molded composite construction for durability and weight savings Provides secure and precise fitment for rear axles and bearings Designed for high-performance rear suspension geometry Includes mounting locations for vertical ball stud height adjustments ✅ Compatibility: RC10B6.2 RC10B6.2D RC10B6.3 / B6.3D (backwards compatible) Also fits other B6-series vehicles with compatible rear hub geometry 📦 Includes: (1) Left Rear Hub (1) Right Rear Hub ⚠️ Note:Use with Team Associated’s tuning inserts and vertical ball stud hardware for full adjustability.

Read more less

  Upgrade your Reflex 14B or 14T with the precision and durability of Team Associated Factory Team Aluminum Wheel Hexes. These lightweight, CNC-machined hexes provide a more secure wheel fit, improved handling consistency, and long-lasting performance compared to stock plastic hexes. Finished in Factory Team blue, they’re a functional upgrade and a visual boost. Features CNC-machined aluminum construction for strength and precision Lightweight design helps reduce rotating mass Factory Team blue anodized finish Provides a secure wheel fit and improved durability Direct replacement upgrade for stock wheel hexes Includes four (4) wheel hexes Compatibility Team Associated Reflex 14B Team Associated Reflex 14T Includes (4) Factory Team Aluminum Wheel Hexes — Blue

Read more less

Team Associated Graphite Rear Hub Link Shim Set: RC10B74   ASC92185

Read more less

Upgrade your rear suspension with the Factory Team V2 Carbon Rear Suspension Arms, designed for maximum rigidity, precision, and race-winning performance on the RC10B7 platform. Built from Team Associated’s legendary carbon composite material, these arms are engineered to eliminate flex and deliver a more consistent, predictable feel on track. ⚙️ Factory Team Performance UpgradeAs part of the Factory Team lineup, these arms are developed to meet the highest standards of competitive racing. Compared to standard plastic arms, the carbon composite construction provides: Increased rigidity Reduced flex under load Improved durability in high-stress conditions This translates to more precise handling and better consistency, especially on high-grip surfaces like carpet and turf. 🏁 Dialed-In Handling & ConsistencyBy minimizing unwanted flex, these arms help maintain suspension geometry through corners, jumps, and hard landings—giving you a more predictable and planted rear end.Perfect for racers looking to gain an edge in competitive conditions. ⚡ Features Factory Team V2 carbon composite construction Increased rigidity for improved performance Reduces flex compared to stock arms Enhances durability and strength Improves handling consistency on track Precision fit for seamless installation   📦 Includes (2) 78mm Factory Team Carbon Rear Suspension Arms   🔧 Compatibility Team Associated RC10B7 RC10B7D RC10B7.1 RC10B7.1D   A premium upgrade for serious racers looking to maximize rear-end consistency, durability, and overall performance on the B7 platform.    

Read more less

Hinge Pin Brace Overview:This is a replacement front hinge pin brace designed for Team Associated RC10 platforms. It helps secure the hinge pins and maintain proper suspension alignment. 🔧 Key Features ✔ Replacement front hinge pin brace✔ Helps maintain suspension alignment✔ Supports chassis rigidity✔ Direct fit design 📦 Includes (1) Front Hinge Pin Brace 🚗 Compatibility Team Associated RC10 B7.1 Team Associated RC10 B7.1D Team Associated RC10 SC7 Team Associated RC10 T7 Ideal for replacing worn or damaged components, this brace helps keep your suspension secure and performing consistently.  

Read more less

Body Support Overview:The 1up Racing UltraLite 7075 Rear Body Support is a lightweight, high-strength upgrade designed to improve body stability and durability on the Team Associated B7 platform. Built for racers who demand both performance and clean aesthetics, this upgrade keeps your body secure through hard landings and rough track conditions. 🏁 About the Rear Body Support 💪 Strength Without the Weight CNC-machined from premium 7075 aluminum, this rear body support delivers excellent durability while remaining incredibly lightweight at just 0.68g. It reinforces your body mounting setup to reduce flex and movement during aggressive driving. ✨ Race-Ready Style Finished in sleek black anodizing with a polished mirror chamfer, this piece adds a premium, high-end look to your build while maintaining race-proven performance. 🔧 Simple Installation Designed to install easily using stock hardware, making it a quick and effective upgrade with no extra hassle. 🔧 Key Features CNC-machined from high-strength 7075 aluminum Ultra-lightweight design (0.68g) Improves rear body support and durability Helps maintain body stability during hard landings Black anodized finish with mirror chamfer Easy installation using stock hardware 📦 Includes (1) UltraLite Aluminum Rear Body Support 🚗 Compatibility Team Associated RC10B7 Team Associated RC10B7.1 A perfect blend of strength, weight savings, and style, this UltraLite rear body support is a simple upgrade that delivers real performance benefits for competitive B7 racers.      

Read more less

Increase chassis rigidity and handling precision with the Factory Team Carbon Top Plate & Ballstud Mount Set for the RC10B7.1 platform. Made from race-proven carbon composite, this upgrade reduces flex and delivers more consistent performance on high-bite tracks. Designed to replace the stock composite components, this carbon set strengthens the chassis structure while improving durability and steering response. Built to Factory Team standards, it’s a premium tuning option for racers looking to maximize performance. 🔧 Features:• Factory Team carbon composite construction• Increases chassis rigidity for high-bite conditions• Reduces flex compared to stock composite parts• Improves handling consistency and steering response• Lightweight and durable design• Precision Factory Team fit and finish 📦 Includes:• (1) Factory Team Carbon Top Plate & Ballstud Mount Set ⚙️ Specifications:• Material: Carbon Composite• Type: Top Plate & Ballstud Mount ✅ Compatibility:• Team Associated RC10B7.1• Team Associated RC10B7.1D            

Read more less

Fine-tune your suspension with the Team Associated 5.0 lb/in Front Shock Spring Set. These blue springs are the stock front springs included with the RC8B3 platform, offering balanced steering response and consistent handling. Designed for performance and durability, these springs provide predictable front-end feel and are ideal as replacement springs or for suspension tuning. 🔧 Features:• 5.0 lb/in spring rate for balanced front-end performance• Blue color-coded springs for easy identification• Stock replacement springs for RC8B3 platform• Consistent handling and predictable steering response• Ideal for maintenance or suspension tuning 📦 Includes:• (2) Front Shock Springs ⚙️ Specifications:• Spring Rate: 5.0 lb/in• Color: Blue• Position: Front ✅ Compatibility:• Team Associated RC8B3• Team Associated RC8B3.1• Team Associated RC8B3e• Team Associated RC8T3• Team Associated RC8T3e  

Read more less

Protect the rear of your truck with the Team Associated RC10SC7 Rear Bumper Set, designed as a direct replacement for the RC10SC7 platform. This durable bumper helps absorb impacts and protects the chassis and body during aggressive racing and bashing. Built for proper fit and easy installation, this rear bumper restores protection and keeps your truck race-ready. 🔧 Features:• Direct replacement for RC10SC7• Helps protect chassis and body from rear impacts• Durable composite construction• Easy installation with factory fit• Ideal replacement for worn or damaged bumpers 📦 Includes:• (1) Rear Bumper Set ⚙️ Specifications:• Position: Rear• Vehicle Type: Short Course Truck ✅ Compatibility:• Team Associated RC10SC7      

Read more less

Restore smooth drivetrain performance with the Team Associated RC10B7.1 Factory Team Bearing Set (92583). Designed for the B7.1 buggy platform, this complete bearing set helps reduce friction and maintain efficient operation throughout the drivetrain and rotating components. Replacing worn bearings is one of the best ways to keep your buggy running fast and free. This Factory Team bearing kit ensures consistent performance, improved efficiency, and reliable operation during both practice and competitive racing. Engineered specifically for the Team Associated B7.1, this set is ideal for routine maintenance, race prep, or a complete rebuild to keep your buggy performing at its best. Features• Factory Team quality bearings for dependable performance• Helps reduce drivetrain friction• Maintains smooth and efficient vehicle operation• Ideal for maintenance, rebuilds, or race preparation• Designed for the RC10B7.1 / B7.1 buggy platform Includes• (1) RC10B7.1 Factory Team Bearing Set        

Read more less

Fine-tune the rear suspension of your Team Associated RC10B7.1 with the Factory Team Gull Dropper & Rear Shock Tower Set (-2mm) (92578). Designed for the B7.1 buggy platform, this upgrade improves rear suspension tuning and helps deliver a more balanced, predictable feel through corners and high-speed sections. The -2mm rear shock tower design lowers the shock mounting position to help improve stability and chassis balance. Paired with the included gull droppers, this setup provides additional flexibility for adjusting rear suspension geometry, allowing racers to fine-tune roll characteristics, traction, and weight transfer to suit different track conditions. Engineered with Factory Team precision, this upgrade integrates seamlessly with the B7.1 chassis and delivers the consistency and durability racers expect when pushing their buggy to the limit. Features• -2mm rear shock tower design for improved stability and balance• Optimized rear shock placement for better suspension tuning• Enhanced roll control and traction during cornering• Factory Team precision engineering for consistent performance• Designed specifically for the Team Associated B7.1 platform Includes• (1) Rear Shock Tower (-2mm)• (2) Gull Droppers A great upgrade for racers looking to maximize tuning options and performance from their RC10B7.1 / B7.1 buggy.    

Read more less

Add strength and durability to your Team Associated B7 with the Avid HD C Arm Mount. Designed for racers who push hard and demand reliability, this heavy-duty version reinforces a critical suspension area to better withstand impacts and aggressive driving. 💪 Heavy-Duty Design The HD C mount features added material along the sides and eliminates the pill cutouts, increasing structural integrity and helping it retain strength during hard crashes and heavy landings. If you’re racing on high-bite tracks or just want extra insurance in rough conditions, this is a smart upgrade. 🏗 Premium Construction Machined from 7075-T6 aluminum Black anodized finish Silver chamfer highlights Laser-etched Avid logo Strong, clean, and built to last. 🔧 Fitment Team Associated B7 When durability matters and you want confidence in your rear suspension mount, the Avid HD C Arm Mount delivers strength without compromise.

Read more less

Upgrade your Team Associated B74 platform with increased stability and improved corner speed using the +1.5mm offset front buggy wheels. Designed especially for high-grip carpet racing, these wheels widen the front track width for better handling, smoother steering response, and added confidence through fast corners. Key Features• +1.5mm wider offset per side (+3.0mm total track width) for maximum stability• Ideal for carpet racing and select dirt track conditions• Molded air vent holes for proper tire performance• +1.5 offset identification molded inside wheel• Durable race-proven construction• Fluorescent Yellow finish Specifications• Hex Size: 12mm• Wheel Size: 2.2" 4WD Front• Offset: +1.5mm• Color: Yellow Includes• (2) Team Associated 2.2" 4WD Front +1.5mm Buggy Wheels Perfect for racers looking to squeeze out extra corner speed and front-end stability on modern high-bite tracks.    

Read more less

🏁 Increased Rigidity for Consistent Drivetrain PerformanceThe Team Associated RC10B84 Factory Team Carbon Front Gearbox Set is an optional upgrade designed to improve drivetrain precision and durability on the RC10B84 and RC10B84D platforms. Constructed from performance-proven carbon composite, this gearbox reduces flex found in standard components, helping maintain proper drivetrain alignment and consistent handling under racing conditions. Built for racers looking to maximize reliability and performance on high-grip tracks. ✅ Performance-proven carbon composite construction✅ Designed for RC10B84 and RC10B84D platforms✅ Reduces flex for improved drivetrain alignment✅ Enhances durability and strength✅ Improves handling consistency on track 📦 Includes:(1) RC10B84 Factory Team Carbon Front Gearbox Set 💡 Pro Tip: When installing drivetrain upgrades, inspect bearings and gear mesh to ensure smooth operation and maximum performance.  

Read more less

The Vision Racing STD Carbon Fiber Chassis for the Team Associated B7 is a premium lightweight upgrade designed to improve overall performance by significantly reducing chassis weight. This setup removes approximately 20 grams compared to stock, helping lower overall mass and improve responsiveness on the track. Built for racers who want a lighter, race-ready foundation, this chassis kit includes everything needed for installation, combining carbon fiber and aluminum components for strength, rigidity, and consistency. Key Features Lightweight carbon fiber chassis Removes approximately 20g compared to stock Improves handling and on-track responsiveness Precision-fit for the Team Associated B7 Race-proven materials and construction Includes (1) Carbon Fiber Chassis Side braces Aluminum nose plate Battery braces Aluminum standoffs Mounting hardware Fitment Team Associated B7 A serious weight-saving upgrade for racers looking to sharpen performance and build a lighter, faster B7. 🏁

Read more less

The 1UP Racing Aluminum LowPro Battery Mount is a precision CNC-machined upgrade for the Team Associated RC10 B7 / B7D, designed to improve battery security while helping lower the car’s center of gravity. Built specifically for Low-CG (20mm) batteries, this mount delivers race-grade durability with clean, pro-level styling. Machined from high-strength 7075 aluminum and finished with black anodizing and mirror-polished chamfers, this mount features a tool-free swivel clamping system for fast battery changes and offset mounting holes to fine-tune battery position. Benefits Low-profile design lowers center of gravity Secure battery hold with quick, tool-free changes Adjustable battery positioning for fine tuning Race-grade strength and precision Features CNC-machined 7075 aluminum Designed for LCG (20mm) battery packs Tool-free swivel clamping mechanism Offset mounting holes for battery adjustment Black anodized finish Chrome chamfered edges CNC-engraved 1UP Racing logo Includes (1) RC10 Aluminum LowPro Battery Mount Compatibility Team Associated RC10 B7 Team Associated RC10 B7D A premium battery mount upgrade that delivers lower CG, faster battery swaps, and clean race aesthetics. 🏁    

Read more less

eam Associated RC10B7 Rear Hub Set (-4mm Offset) | 92518 Product Overview:The Team Associated RC10B7 Rear Hub Set (92518) is a precision replacement or tuning component designed for the RC10B7 platform. Featuring a -4mm offset, these rear hubs allow racers to fine-tune rear track width and handling characteristics for improved consistency and performance on high-grip and technical track conditions. Key Features: Stock replacement rear hub set for RC10B7 -4mm offset for optimized rear geometry Durable molded construction for long-lasting performance Ideal for tuning rear grip and stability Precision fit for competitive racing applications Required for Installation: Team Associated #92207 RC10B74 Rear CVA Axle (66mm) (required, sold separately) Compatibility: Team Associated RC10B7 Team Associated RC10B74 Includes: (1) Pair of RC10B7 Rear Hubs ⚡ Pro Tip: Pair these with the Factory Team carbon rear arms (92516) for a fully upgraded suspension setup that maximizes handling precision on high-traction tracks.  

Read more less

Fine-tune chassis balance and steering feel with the JConcepts Steel Servo Weight Plate for the RC10B7 platform. Designed with a modular two-piece layout, this adjustable weight system allows racers to add mass precisely where it matters most for improved front-end stability and corner consistency. CNC-machined from steel and finished with a durable black oxide coating, this plate delivers strength, precision, and repeatable tuning options. The interlocking design ensures a secure fit, while laser-etched markings make identification quick and easy in the pit. Features: CNC-machined steel construction with black oxide coating Two-piece adjustable weight design Main plate weighs 9.5g with optional 8g insert (17.5g total) Interlocking components for secure mounting Laser-etched markings for easy identification Designed for precise chassis balance tuning Includes: (1) Steel Servo Weight Plate (1) Optional 8g Weight Insert Needed to Complete: (3) 2x3mm Flat Head Cap Screws (Team Associated ASC91749) Compatibility: Team Associated RC10 B7 Team Associated RC10 B7.1 Team Associated RC10 B7.1D Team Associated RC10 B7D Team Associated RC10 SC7 Team Associated RC10 T7

Read more less

Rolling freely is critical for race-day performance, and the JConcepts Radial NMB Bearing Set is built to meet the demands of elite competition. This complete kit uses NMB stainless steel bearings manufactured to exacting tolerances, delivering smooth rotation, durability, and long service life under hard racing conditions. Designed as a direct-fit replacement, this set restores efficiency, reduces drivetrain drag, and helps keep lap times consistent from the first heat to the mains. Features & Benefits: High-quality NMB stainless steel bearings Precision tolerances for smooth, efficient rotation Durable construction for long-lasting performance Reduces friction and improves drivetrain efficiency Designed for the rigors of competitive racing Compatibility (Direct Fit): Team Associated B6.4 Team Associated B6.4D Team Associated T6.4 Team Associated SC6.4 Includes: Complete radial bearing set for supported models A must-have upgrade or refresh for racers looking to keep their Associated platform rolling smooth and fast.

Read more less

Keep your differential sealed and performing smoothly with the Team Associated B64 Differential Gasket & O-Ring Set. This genuine replacement set is designed to restore proper sealing and reliability in your drivetrain during maintenance or rebuilds. Features & Benefits: Genuine Team Associated replacement parts Ensures proper differential sealing and consistent performance Ideal for routine maintenance or diff rebuilds Compatibility: Team Associated RC10 B64D Team Associated B64 4WD Buggy Platform Includes: Differential gasket O-rings A must-have service item to keep your B64 drivetrain smooth, consistent, and race-ready.  

Read more less

The Team Associated 92444 Factory Team Aluminum Servo Weight Plate is an optional tuning component designed for the RC10B7 2WD buggy. This precision aluminum plate adds 6 grams of weight at the servo location, allowing racers to fine-tune front-to-rear balance and steering feel for varying track conditions. Ideal for improving consistency, stability, and cornering behavior without major setup changes. 🔧 Features Genuine Team Associated Factory Team option part CNC-machined aluminum construction Adds 6 grams of chassis weight Mounts at the servo location for effective balance tuning Simple, reversible tuning solution 📐 Specifications Weight: 6g Material: Aluminum 📦 Includes (1) Aluminum Servo Weight Plate ✅ Compatibility •  Team Associated RC10B7

Read more less

Upgrade your Team Associated RC10B7/B7D with the ultimate lightweight hardware package! The JConcepts Titanium Lower Screw Set is engineered for racers who want maximum strength, precision, and performance. With high-grade titanium construction and brilliant anodized finishes in Blue or Black, this set delivers both style and serious on-track advantages. Each screw is machined to exact tolerances, offering exceptional durability and smoother wrench feel. The low-head FHCS profile keeps weight low and sleek, while the titanium build cuts unnecessary mass from the lower portion of the chassis—improving handling, balance, and acceleration. Every screw is packed in a labeled bag identifying its location on the vehicle, making installation simple and organized. ⭐ Features Premium high-grade titanium construction Reduces overall vehicle weight for improved performance Low-head FHCS design for a clean fit Available in Blue or Black anodized finishes 3mm thread base compatible with RC10B7/B7D platforms Labeled bags for each area of the vehicle for easy installation Increased strength, durability, and long-term reliability 📦 Includes (28) Titanium screws in various sizes Individually labeled bags for chassis locations ⚙️ Compatibility Team Associated RC10B7 Team Associated RC10B7D

Read more less

Spur Gear Overview: Keep your drivetrain running smooth and efficient with the Team Associated RC10TC8 64P 92-Tooth Spur Gear. Designed specifically for the RC10TC8 chassis, this precision-cut gear delivers consistent mesh, quiet operation, and dependable durability — perfect for both racing and high-performance touring setups. A must-have replacement item for wear, damage, or gearing adjustments. Features Precision-molded 64 pitch gear profile Smooth, reliable operation for competitive on-road racing Direct factory replacement for the RC10TC8 Ideal for fine-tuning gearing and performance Compatibility Team Associated RC10TC8 Includes (1) 92T 64P Spur Gear

Read more less

Precision Fit. Race-Proven Performance. Upgrade your TC8 with the 1UP Racing Aluminum DirectHex Hub Axles, engineered for racers who demand accuracy, strength, and tuning flexibility. Designed with a true hex interface, these axles eliminate slop and inconsistencies found in traditional clamping-style hubs, ensuring smooth, precise wheel alignment and consistent performance lap after lap. Precision Tuning Made Easy Machined from lightweight 7075 aluminum, these DirectHex axles combine strength and style with a sleek black anodized finish and laser-etched 1UP Racing logos. Each set includes premium 6x10x3 Cv2 Pro bearings and four o-rings for secure installation and long-lasting durability. With 6mm offset, they provide the perfect balance of handling and stability for competitive TC8 setups. Features: True hex interface eliminates wheel slop and clamping issues CNC-machined from 7075 aluminum for strength and weight savings Black anodized finish with laser-etched size and branding Includes 6x10x3 Cv2 Pro bearings for smooth performance Four o-rings included for precise and secure installation Race-proven design for the Team Associated TC8 platform Available in 4mm, 5mm, and 6mm options to fine-tune handling Includes: (2) TC8 Aluminum DirectHex Hub Axles (6mm Offset) (2) 6x10x3 Cv2 Pro Bearings (4) O-Rings Compatibility: Team Associated TC8 1UP Racing — Engineered for Precision. Tuned for Champions.

Read more less

Overview:Upgrade your Team Associated B6.4 or B6.4D with the 1UP Racing Pro Duty Titanium Upper Screw Set, engineered for racers who demand the perfect blend of strength, precision, and style. Crafted from aerospace-grade titanium, these screws reduce weight while boosting durability and adding a premium look to your build. About the Pro Duty Titanium Upper Screw SetThe 1UP Racing Pro Duty Titanium Upper Screw Set replaces all stock M3 button and flat-head screws with 1UP’s precision LowPro and Flat Head titanium hardware. Each set also includes Lockdown Screws wherever possible, eliminating the need for separate upgrades. Machined from 6AL-4V (Grade 5) titanium, every screw is CNC-cut for optimal strength, consistency, and a flawless finish — giving you reliability that lasts race after race. Features: Aerospace-grade 6AL-4V (Grade 5) titanium construction Replaces all kit M3 button and flat-head screws Includes 1UP Lockdown Screws where applicable CNC-lathe machined for superior strength and precision fit Reduces overall vehicle weight while improving durability Race-proven design for high-stress RC conditions Sleek, professional finish for premium appearance Installation Tip:For best results, 1UP Racing recommends using Genuine MIP 2.0 mm Hex Driver Wrenches for optimal hex engagement and longevity. Compatibility: Team Associated RC10 B6.4 Team Associated RC10 B6.4D Includes: (1) Complete Titanium Upper Screw Set (for RC10 B6.4/B6.4D)  

Read more less

Durable. Precise. Ready for the strip.The Team Associated DR10M Suspension Arm Set is a direct replacement designed specifically for your DR10M drag car. Crafted from high-strength composite material, these arms deliver the ideal blend of rigidity and flex for consistent traction, smooth launches, and precise straight-line stability. Whether you're repairing crash damage or refreshing your suspension setup, this factory-original set ensures your DR10M stays race-ready and performing at its best. ⚙️ Features Genuine Team Associated factory replacement parts Durable composite construction for strength and consistency Precision molded for perfect fit and alignment Keeps your DR10M handling smooth and stable on every pass 📦 Includes (1) Complete DR10M Suspension Arm Set ✅ Compatibility Team Associated DR10M    

Read more less

⚙️ Smooth, Efficient, Race-Ready PerformanceUpgrade your RC28R’s drivetrain with the Team Associated Factory Team Bearing Set, engineered for racers who demand maximum precision and efficiency. These high-quality bearings dramatically reduce friction, allowing for smoother power delivery, increased speed, and longer component life. 🔧 About the Bearing Set Each bearing in this Factory Team set is precision-machined to ensure a perfect fit and consistent performance. Whether you’re rebuilding your RC28R or upgrading from bushings, these bearings provide an instant boost in responsiveness and efficiency. 🌟 Features Reduces drivetrain friction for smoother operation Improves efficiency and extends component life Precision-fit bearings ensure tight tolerances Factory Team quality for reliable performance Ideal for both rebuilds and performance upgrades Includes: (8) RC28R Factory Team Bearings Compatibility: Team Associated RC28R Team Associated RC28 🏎️ Experience the difference of ultra-smooth operation — with Factory Team bearings, every lap feels faster and every component lasts longer.

Read more less

⚙️ Precision Suspension Tuning for Maximum PerformanceThe Team Associated 3.8x2.0x0.5mm Ballstud Washer is a high-precision tuning accessory designed to help racers fine-tune their suspension geometry. By placing these washers under your ball studs, you can adjust camber link height and roll centers to optimize cornering grip, steering response, and overall chassis balance. ✅ Precision Machined Design – Ensures consistent, repeatable ride height adjustments✅ Fine-Tuning Capability – Each 0.5mm shim allows subtle changes to suspension geometry for dialed-in performance✅ Durable Construction – Maintains shape and thickness under load for long-term reliability✅ Ideal for Trackside Adjustments – Perfect for racers seeking fine control over handling balance Includes: (10) 3.8x2.0x0.5mm Ballstud Washers Compatibility: Team Associated RC28 Team Associated RC28R Also suitable for other 1/28-scale and 1/10-scale platforms using 3.5mm ball studs 🏁 Dial in your handling precision with genuine Team Associated 0.5mm ballstud washers — the key to achieving consistent, race-winning performance.      

Read more less

⚙️ Fine-Tune Your Suspension SetupThe Team Associated 3.8x2.0x0.25mm Ballstud Washer is a precision shim designed for racers who want ultimate control over their suspension geometry. Placed under ball studs, these ultra-thin washers allow for small but effective changes to camber-link height—helping you dial in cornering balance, traction, and steering response with pinpoint accuracy. ✅ Ultra-Thin Precision Shims – Perfect for fine-tuning camber-link angles and roll centers✅ Durable Steel Construction – Maintains shape and consistency under load✅ Micro-Adjustable Handling – Each washer equals a 0.25 mm height change for detailed setup tuning✅ Race-Proven Quality – Designed for precision and consistency across multiple chassis setups Includes: (10) 3.8x2.0x0.25 mm Ballstud Washers Compatibility: Team Associated RC28 Team Associated RC28R Suitable for other 1/28-scale and 1/10-scale platforms using 3.5 mm ball studs 🛠️ Perfect for racers looking to achieve professional-level suspension precision and performance.    

Read more less

🔩 Precision Hardware for Smooth Suspension MovementThe Team Associated RC28R 3.5mm Ball Studs are precision-engineered hardware components that deliver consistent, smooth articulation throughout your RC28R’s suspension and steering systems. Machined from durable steel, these ball studs provide secure linkage connections and maintain reliable performance even under the stress of competitive racing. ✅ High-Quality Steel Construction – Ensures long-lasting strength and durability✅ Smooth Suspension & Steering Articulation – Promotes consistent handling response✅ Perfect OEM Fit – Designed specifically for the RC28R platform✅ Ideal Replacement or Upgrade – Great for maintenance or fine-tuning setups Includes: (5) 3.5mm Ball Studs (2x4mm) Compatibility: Team Associated RC28R ⚡ Maintain precise control and smooth suspension travel with genuine Team Associated 3.5mm Ball Studs for your RC28R.    

Read more less