🔩 Secure Your Hardware with ConfidenceThe ProTek RC Blue Thread Lock (Medium) is the ultimate solution for preventing hardware from loosening due to vibration or shock. Formulated for precision RC applications, this medium-strength thread locker is ideal for securing metal screws, nuts, and bolts — while still allowing easy disassembly with standard hand tools when needed. ⚙️ About the ProTek RC Blue Thread Lock Designed for both electric and nitro RC models, this medium-viscosity formula creates a strong bond that resists loosening under extreme conditions. It’s perfect for drivetrain components, suspension hardware, and any part exposed to constant vibration. In addition to its holding power, it prevents rust and corrosion, keeping your fasteners clean and reliable over time. 🌟 Features Medium strength — secures fasteners yet allows easy removal Resists shock and vibration for consistent reliability Prevents rust and corrosion on metal threads Cures without air exposure — sets in 10 minutes, full cure in 24 hours Ideal for RC vehicles, drones, and aircraft 🧴 Specifications Size: 0.34 fl oz (10ml) Strength: Blue (Medium) Cure Time: 10 minutes initial set / 24 hours full cure Removable: Yes Compatible Fasteners: Non-plastic screws, nuts, bolts 📦 Includes (1) 0.34 fl oz bottle of ProTek RC Blue Thread Lock (Medium Strength) 💪 Keep your rig tight, precise, and race-ready — ProTek RC Blue Thread Lock is your defense against loose hardware.

Read more less

Built tough. Rust-proof. Track-ready.Upgrade your Traxxas® Slash® 4x4 BL-2s with the ultimate hardware overhaul — the RC Screwz Stainless Steel Screw Kit. Designed for complete vehicle coverage, this kit replaces every stock screw with high-grade stainless steel hardware that resists rust, corrosion, and bending. Perfect for racers and bashers who demand performance, reliability, and clean looks under any condition. Complete Conversion. Long-Term Durability.Each kit includes all socket, button, and flat head screws — plus extras of the most commonly used sizes. Organized in a reusable plastic pit case and paired with Bondhus short-arm hex wrenches, it’s everything you need to maintain, rebuild, or fully upgrade your Slash® 4x4 with confidence. For best results, apply wax or grease to the threads when installing screws into new or tight materials to prevent stripping. Some small-diameter screws (2mm and #2-56) retain Philips heads for maximum strength in high-stress areas like the chassis and differential mounts. 💪 Features: Complete stainless-steel screw kit for full RC conversion Premium hardware resists rust, corrosion, and bending Prevents stripped heads — precision-machined stainless design Recommended to lubricate threads before installation Organized in a durable, reusable pit case Includes Bondhus Short Arm Hex Wrenches for easy setup 📦 Includes: All Socket Head Screws + Extras Button Head Screws + Extras Flat Head Screws + Extras Set Screws + Extras Nuts + Extras Washers + Extras Bondhus Short Arm Hex Wrenches (All Sizes) Quality Reusable Plastic Pit Case ✅ Compatibility: Traxxas® Slash® 4x4 BL-2s 1/10  

Read more less

Small parts. Big strength.These Traxxas 4x10mm Button Head Machine Screws are precision-made for strength, fit, and durability. Perfect for maintenance, repairs, or custom builds, they’re designed to fit a wide range of Traxxas vehicles — including the legendary Revo® — and countless other RC applications. Built for ReliabilityCrafted from high-quality steel, these screws feature a smooth button head for a clean, finished look and a secure hold. Ideal for chassis assembly, suspension components, and accessories where strength and style matter. 💪 Features: Genuine Traxxas hardware for perfect fit and finish Strong steel construction for long-lasting use Button head design for smooth, low-profile appearance Ideal for a variety of RC maintenance and upgrade applications 📦 Includes: (6) 4x10mm Button Head Machine Screws ✅ Compatibility: Fits Traxxas Revo® and most other Traxxas models Universal fit for general RC applications    

Read more less

🔧 Quick-Access Body and Battery RetentionThe Team Associated B6 Thumbscrews are genuine replacement parts designed for the RC10 B6 and B6D buggies. These thumbscrews provide a secure and tool-free solution for fastening body mounts or battery straps — making maintenance and adjustments faster than ever. ⚙️ About the Thumbscrews Constructed from durable composite material with precision-molded threads, these thumbscrews ensure a tight and reliable hold while allowing easy removal by hand. Whether you’re making quick pit adjustments or swapping batteries between heats, these are a must-have for convenience and performance. 🌟 Features Direct replacement for RC10 B6 and B6D thumbscrews Tool-free installation and removal Durable composite construction for long life Provides secure hold for battery straps or body mounts Designed for quick pit adjustments Includes: (2) Team Associated B6 Thumbscrews Compatibility: Team Associated RC10 B6 Team Associated RC10 B6D & more 🧰 Simple, strong, and efficient — these thumbscrews keep your buggy race-ready with no tools required.  

Read more less

🔩 Lightweight Strength for Secure AssemblyThe Team Associated M2 Black Aluminum Locknuts deliver lightweight strength and reliability for your RC builds. Designed for precision fitment and secure fastening, these locknuts are ideal for critical components that experience vibration and high stress. ⚙️ About the Locknuts Crafted from durable aluminum and finished in sleek black anodizing, these locknuts not only reduce weight but also resist corrosion while maintaining a clean, professional look. The nylon locking insert ensures a tight hold that won’t back off under load — perfect for suspension pivots, steering components, and chassis hardware. 🌟 Features High-strength aluminum construction with black anodized finish Lightweight design for improved performance Nylon locking insert prevents loosening from vibration Precision-machined threads for smooth, secure installation Ideal for suspension, steering, and drivetrain components Includes: (8) M2 Black Aluminum Locknuts Compatibility: Team Associated RC28R Team Associated RC28 Also fits other 1/28-scale platforms using M2 hardware 🧰 Upgrade your RC28R with precision-engineered aluminum locknuts — strong, stylish, and built to stay tight no matter how hard you drive.    

Read more less

🔧 Comprehensive Replacement Hardware for the RC28RKeep your micro racer dialed in with the Team Associated RC28R Specialty Hardware Set, a 30-piece kit packed with essential small components used throughout the RC28R chassis. ⚙️ About the Hardware Set This specialty set includes a mix of precision fasteners, clips, and small hardware designed to maintain your vehicle’s structural integrity and reliability. Whether you’re performing routine maintenance, rebuilding your chassis, or replacing lost hardware, this kit ensures you have the exact factory parts you need. 🌟 Features Complete factory replacement hardware kit Includes critical small fasteners and specialty pieces used across the RC28R chassis Precision-machined components ensure a perfect fit Durable steel and composite materials resist wear and vibration Ideal for maintenance, rebuilds, or spare parts boxes Includes: (30) RC28R Specialty Hardware Components Compatibility: Team Associated RC28R Team Associated RC28 🧰 A must-have kit for every RC28R owner — keep your vehicle secure, smooth, and race-ready with genuine Team Associated specialty hardware.  

Read more less

🔩 Essential Replacement Set Screws for Your RC28RMaintain precision and reliability with the Team Associated RC28R M2 Set Screw Hardware Set — a genuine factory replacement kit designed to keep your micro racer performing at its best. ⚙️ About the Hardware Set These M2 set screws are crucial for securing key drivetrain and suspension components throughout your RC28R. Made from high-strength steel, they deliver a tight, durable fit that resists vibration and loosening during high-performance runs. 🌟 Features Factory replacement M2 set screws for the RC28R Perfect for drivetrain, suspension, and linkage applications Precision-machined threads for smooth, reliable installation Durable steel construction ensures long-lasting performance Ideal for repairs, rebuilds, and maintenance kits Includes: (1) M2 Set Screw Hardware Set Compatibility: Team Associated RC28R Team Associated RC28 🧰 Stay race-ready — replace worn or lost set screws with this precision-engineered Team Associated hardware set and keep your RC28R running smooth and secure.    

Read more less

🔧 Precision Hardware for a Clean, Flush FitKeep your RC28R in peak condition with the Team Associated 2mm Flat Head Hardware Set — a premium collection of replacement screws engineered for strength, precision, and seamless installation. ⚙️ About the Screw Set These flat head screws are designed to sit flush with the surface, offering a clean look and improved aerodynamics while maintaining a solid, vibration-resistant hold. Perfect for racers and hobbyists who demand both performance and polish from their builds. 🌟 Features Comprehensive 30-piece replacement set Flat head design for smooth, flush mounting Precision-machined threads ensure secure fastening Durable steel construction resists wear and stripping Ideal for repairs, rebuilds, or custom RC projects Includes: (30) 2mm Flat Head Hardware Screws Compatibility: Team Associated RC28R Team Associated RC28 Suitable for other 1/28-scale RC builds requiring 2mm flat head screws 🧰 Essential for every pit box — restore, rebuild, or refine your micro racer with genuine Team Associated hardware built for precision and reliability.  

Read more less

🔩 Complete Factory Replacement Hardware SetKeep your RC28R race-ready with the Team Associated M2 Button Head Hardware Set — a genuine replacement pack containing all the essential screws needed to maintain, rebuild, or upgrade your micro racer. 🔧 About the Hardware Set Designed specifically for the RC28R platform, these high-quality M2 button head screws offer precise fitment and durable performance. Whether you’re performing routine maintenance or replacing lost hardware, this 30-piece set ensures you’ll always have the right screw for the job. 🌟 Features Complete factory hardware replacement set Includes (30) M2 button head screws Durable steel construction for long-lasting performance Perfect fit for RC28R and compatible models Ideal for repairs, rebuilds, and spare parts kits Includes: (1) M2 Button Head Hardware Set (30 pieces) Compatibility: Team Associated RC28R Team Associated RC28 🧰 A must-have for every RC28R owner — keep your car tight, tuned, and ready for race day with genuine Factory Team hardware.  

Read more less

Traxxas 4mm Aluminum Flanged Serrated Locknuts (4-Pack) Part #: 1747G / 1747R / 1747T / 1747A / 1747PAvailable Colors: Green, Red, Blue, Black, Purple Add both function and flair to your RC build with Traxxas Aluminum 4mm Flanged Locknuts! These serrated, anodized locknuts offer a lightweight, high-strength upgrade that resists loosening from vibration—perfect for racers and bashers alike. 📦 Includes: (4) 4mm Aluminum Flanged Serrated Locknuts (choose color) ✅ Features: CNC-machined from lightweight 6061-T6 aluminum Anodized finish for brilliant color and corrosion resistance Serrated flange helps grip plastic or metal surfaces securely Adds a high-performance, custom look to your RC rig Fits standard 4mm threaded axles and components Compatible with most Traxxas 1/10 scale vehicles 🎨 Dress up your build and lock in performance—available in multiple colors to match your style!

Read more less

Traxxas Front Hex Wheel Hub (2) – Part #3654🔧 Keep Your Front End Dialed In. The Traxxas 3654 Front Hex Wheel Hubs are direct replacements for your worn or damaged originals. Designed for a precise factory fit, these hubs ensure your front wheels stay securely mounted and spinning true. Includes the necessary axle pins for a quick, hassle-free install. ✅ Includes two front hex hubs and two axle pins✅ Factory fit for Traxxas 2WD models✅ Keeps wheels aligned and properly secured✅ Easy to install – get back on track in minutes 📦 Includes: (2) Front Hex Wheel Hubs (2) Axle Pins 💡 Pro Tip: Always inspect your hubs and pins for wear—keeping them fresh ensures consistent handling and durability on race day.  

Read more less

Traxxas 5x8x0.5mm Teflon Washers (20) Part #: 1985 Ensure smoother performance and reduced friction with Traxxas PTFE-Coated Teflon Washers. These 5x8x0.5mm washers are designed to be used with ball bearings, helping to extend bearing life and improve overall drivetrain efficiency. ✅ Features: PTFE (Teflon) coating for low friction and long wear Ideal for use with 5x8mm ball bearings Helps reduce heat and drag in rotating components Precision-manufactured for consistent fit and function 📦 Includes: (20) 5x8x0.5mm PTFE-Coated Teflon Washers 🛠️ Perfect for racers and bashers alike — upgrade your RC performance with these ultra-low friction washers from Traxxas!

Read more less

Traxxas Stub Axle Pins (4) – Part #2754🔩 Secure Your Power. Stay Locked In. Keep your wheels connected and your drivetrain dialed with the Traxxas Stub Axle Pins. These precision replacement pins are designed to fit through the axle stub and lock securely into the wheel hubs—ensuring reliable performance run after run. ✅ Genuine Traxxas replacement part✅ Compatible with rear axle stubs✅ Keeps wheel hubs securely mounted✅ Ideal for routine maintenance or repair 📦 Includes: (4) Stub Axle Pins

Read more less

  Traxxas X-Maxx 17mm Splined Wheel Nuts (4) – Part 7758Lock In Power. Add a Pop of Color. The Traxxas 17mm Splined Wheel Nuts (7758) are designed specifically for the X-Maxx, offering a secure, no-slip hold on your wheels—even under extreme torque. With a unique splined design and anodized aluminum finish, these nuts add both function and style to your build. ✅ Set of 4 aluminum splined wheel nuts✅ 17mm fitment – designed for the X-Maxx✅ Splined design – extra grip to prevent wheel spin and stripping✅ Durable anodized finish – built for abuse and corrosion resistance✅ Available in 6 bold colors: Blue, Green, Red, Orange, Black, and Gray✅ CNC-machined aluminum – lightweight and strong 📦 Includes: (4) 17mm Splined Wheel Nuts Part #: 7758 Choose your color: Blue, Green, Red, Orange, Black, or Gray 💡 Pro Tip: Use matching aluminum accents like hubs or caps to complete the look and protect key components.  

Read more less

Traxxas Servo Saver w/AdaptersPart #: 1844X Protect Your Servo. Extend Its Life.The Traxxas Servo Saver is built to safeguard your steering servo from the punishing impacts of off-road bashing and hard landings. Designed as a direct replacement for the Traxxas Bigfoot No.1 Original BL-2s™ HD and Stampede 1/10 2WD Brushed or Brushless Monster Trucks, this rugged component absorbs shock loads that would otherwise damage your servo’s internal gears. Perfect for those who demand long-term reliability, this kit comes complete with adapters and a mounting screw for a simple and secure installation. Features: Protects servo gears from heavy impacts Direct replacement for multiple 1/10 Traxxas models Includes adapters and mounting hardware Durable construction for long-lasting performance Includes: (1) Servo Saver (2) Adapters (1) 3x14mm Screw Keep your steering sharp and your servo safe—upgrade with the Traxxas 1844X Servo Saver today.

Read more less

  Keep your rig tight and secure with this set of 3x15mm button head machine screws from Traxxas. Built for durability and precision, these screws are perfect for maintenance, repairs, or custom builds. 🔩 Features: (6) High-quality 3x15mm button head machine screws Strong steel construction for long-lasting use Ideal for a wide range of Traxxas models, including the Revo Great for general RC repairs and upgrades Fits:Any vehicle that requires 3x15mm machine screws – universal compatibility across many Traxxas platforms. Reliable, tough, and ready to bolt down your next project.

Read more less

Traxxas 4mm Locknuts (10-Pack) Part #: 1747 | Secure Fit for Your RC Wheels & Components The Traxxas 1747 4mm Locknuts are designed to keep your wheels and components securely in place under extreme RC conditions. Built for strength and vibration resistance, these locknuts are a must-have for racers and bashers alike. 📦 Includes: (10) 4mm Locknuts ✅ Features: Nylon-insert locknut design resists loosening from vibration Standard 4mm thread size for broad compatibility Ideal for wheel nuts, suspension arms, and more Fits a wide range of Traxxas vehicles Durable metal construction

Read more less

Traxxas 3x8mm Button Head Machine Screws (6) – Part #2576🔩 Essential Hardware. Universal Fit. Keep your rig dialed with this 6-pack of Traxxas 3x8mm Button Head Screws. Designed for a clean, low-profile finish and built to handle tough conditions, these machine screws are perfect for a wide range of RC applications—including the Traxxas Revo and beyond. ✅ Button head design for a sleek and secure hold✅ Machine thread for metal or tapped plastic✅ Universal fit across many Traxxas vehicles✅ A great go-to screw for any pit box 📦 Includes: (6) 3x8mm Button Head Machine Screws 

Read more less

Traxxas 4mm Steel Flanged Serrated Nylon Locknuts (8) – Part #3647🔒 Secure It Right the First Time. The Traxxas 4mm Flanged Serrated Nylon Locknuts are built to keep your critical components locked down, even under extreme RC action. These steel locknuts feature a flanged base and serrated surface for extra grip, while the nylon insert ensures they won’t back off from vibration. ✅ Perfect for wheels, suspension, and drivetrain parts✅ Serrated flange resists loosening under stress✅ Durable steel construction with nylon insert✅ Direct replacement for most Traxxas vehicles 📦 Includes: (8) 4mm Flanged Serrated Nylon Locknuts 💡 Pro Tip: Always keep extras on hand—these are one of the most-used fasteners in your toolbox.

Read more less

Traxxas 3x8mm Flat Head Screw (6) (VXL) – Part #3931🔩 Secure Fit. Clean Finish. The Traxxas 3x8mm Flat Head Screws are precision-machined for a flush, low-profile installation. Ideal for use in VXL and other Traxxas vehicles, these flat head screws ensure a snug, countersunk fit for components where a smooth finish is essential. ✅ Perfect for flush-mount applications✅ 3x8mm metric sizing✅ Flat head design for clean installation✅ Genuine Traxxas quality✅ Great for chassis, body panels, and more 📦 Includes: (6) 3x8mm Flat Head Screws 💡 Pro Tip: Always check your manual for proper screw placement and thread-lock recommendations for metal-on-metal applications.  

Read more less

Traxxas 3x25mm Round-Head Machine Screws (6) – Part 2569Long Reach. Rock-Solid Hold. The Traxxas 3x25mm round-head machine screws are ideal for applications that require extra length without sacrificing strength or fit. Perfect for securing larger components or layering through thicker mounts. ✅ Includes 6 round-head machine screws✅ Size: 3x25mm – longer length for deeper mounting points✅ Durable steel construction – built to last under stress✅ Compatible with standard 3mm thread applications✅ Fits many Traxxas 1/10 scale models 📦 Includes: (6) 3x25mm Round-Head Machine Screws Part #: 2569 💡 Pro Tip: Match with washers or spacers to create rock-solid mounting solutions for electronics, bumpers, and more.    

Read more less

Keep your Traxxas vehicles running strong with this genuine set of button-head machine screws. At 3x14mm, these precision-engineered screws are perfect replacements for stock hardware and ensure a secure fit on your build. Whether you’re repairing, upgrading, or customizing, Traxxas hardware delivers the durability and reliability you need. Features: Genuine Traxxas replacement part Button-head machine screws, 3x14mm Pack of 6 screws included High-quality steel construction for long-lasting use Includes:(6) 3x14mm Button-Head Machine Screws Compatibility:Used across a wide range of Traxxas vehicles. Check your model’s manual to confirm exact fit.    

Read more less

🔧 Built to handle the toughest hits! The Traxxas 9042 Extreme Heavy-Duty Suspension Pin Set is a must-have for owners running the 9080-series Extreme Heavy Duty Upgrade Kit. Designed for maximum durability, these screw pins keep your upgraded suspension arms firmly in place during extreme bashing sessions. Key Features: Heavy-duty steel construction for maximum strength Includes multiple lengths for complete front and rear coverage Designed specifically for the 9080-series Extreme Heavy Duty Upgrade Kit Will not fit standard suspension components 📦 Includes: (4) 3x52mm Screw Pins (2) 3x32mm Screw Pins (2) 3x40mm Screw Pins Compatibility: For use only with the Traxxas 9080-series Extreme Heavy Duty Upgrade Kit

Read more less

🔩 Strong, reliable fasteners for your Traxxas builds. This pack of Traxxas 3x30mm Button Head Machine Screws is perfect for repairs, upgrades, or custom builds. Made from durable steel and precision-threaded, they’re compatible with a wide range of Traxxas models, including the Revo. ✅ Durable steel construction✅ Precision M3 threading✅ Button head design for a smooth finish✅ Fits many Traxxas vehicles, including the Revo 📦 Includes:• (6) 3x30mm Button Head Machine Screws    

Read more less

These 3x12mm countersunk machine screws from Traxxas are perfect for flush-mount applications where a clean, low-profile finish is needed. With Phillips drive heads for easy installation, they’re ideal for chassis and other flat-surface mounting tasks. Features:• 3x12mm steel machine screws• Countersunk heads for flush fit• Phillips drive for standard screwdriver compatibility• Great for chassis and hardware installations• Genuine Traxxas hardware for reliable performance Includes:• (6) 3x12mm Countersunk Machine Screws (Phillips Drive)Part Number: 3178 Tighten up your build with dependable, flush-fitting Traxxas screws.  

Read more less

Secure your components with confidence using Traxxas 3x20mm Countersunk Machine Screws. Featuring hex drive heads and a flush-fit countersunk design, these screws are perfect for applications where a smooth surface is essential. Features:• 3x20mm steel machine screws• Countersunk heads for flush mounting• Hex drive for reliable installation• Ideal for chassis, suspension, and flat-surface mounting• Genuine Traxxas hardware Includes:• (6) 3x20mm Countersunk Machine ScrewsPart Number: 2590 Perfect fit, strong hold—upgrade or replace with genuine Traxxas quality.      

Read more less

Keep your engine secure with this pack of four 3x10mm flat head hex screws from Traxxas. Designed specifically for engine mount applications, these screws offer a flush fit and solid hold. A must-have for maintenance or replacement in your Traxxas nitro models. ✅ Flat head for flush engine mount fit✅ 3x10mm hardened steel construction✅ Hex drive for easy installation✅ Genuine Traxxas part Includes: (4) 3x10mm Flat Head Engine Mount Hex Screws Part #: 4859 Perfect fit. Proven durability. Traxxas quality.    

Read more less

Whether you're replacing worn-out hardware or stocking up your pit box, these genuine Traxxas 3x12mm button head machine screws are a must-have! Made with precision and durability in mind, they're perfect for securing various components on your Traxxas RC vehicles. ✅ Includes: 6 screws✅ Thread: Machine✅ Size: 3x12mm✅ Fits: Virtually any Traxxas vehicle – including Revo, Slash, Rustler, TRX-4, and more✅ Use for: Repairs, upgrades, or custom builds Built by Traxxas for Traxxas – engineered to fit right every time.    

Read more less

Keep your RC ride race-ready with this pack of Arrma 2.5x8mm Cap Head Screws. Designed as a direct replacement for stock hardware, these high-quality screws are a must-have for routine maintenance or repairs. 🔧 Features: ✅ Precision-made 2.5x8mm cap head screws✅ Ideal for replacing worn or stripped hardware✅ Durable steel construction for lasting performance 📦 Includes: (10) 2.5x8mm Cap Head Screws 🚗 Compatibility: • Arrma Granite Grom• Arrma Mojave Grom• Arrma Typhon Grom• Losi NASCAR

Read more less

Traxxas Servo Saver – Part #6944🔧 Reliable Steering Protection for Your Funny Car The Traxxas Servo Saver is a direct replacement part designed for the Traxxas 1/8 Scale Funny Car. It’s built to protect your steering servo from impact and stress during high-speed runs and tight turns, ensuring smooth, precise control without compromising durability. ✅ Factory fit for the Traxxas 1/8 Funny Car✅ Helps prevent servo damage from crashes or impacts✅ Maintains consistent steering performance✅ Easy to install and ready to race 📦 Includes:(1) Servo Saver Assembly

Read more less

Traxxas Servo Saver w/Adapters – Part #3744X🛡️ Protect Your Steering. Preserve Your Servo. Keep your steering system sharp and your servo protected with the Traxxas 3744X Servo Saver. Engineered for most 2WD Traxxas models, this servo saver absorbs harsh impacts to help prevent internal servo damage—especially when bashing hard or racing rough. The included adapters ensure wide compatibility, making this an easy, must-have upgrade or replacement. ✅ Fits most 2WD Traxxas vehicles✅ Includes multiple adapters for model versatility✅ Absorbs impact to prevent servo damage✅ Maintains smooth, responsive steering 📦 Includes: (1) Servo Saver (1) Mounting Screw (2) Servo Adapters 💡 Pro Tip: Pair with a metal gear servo for ultimate durability and steering confidence on the track or trail.

Read more less

Traxxas Shock Piston Head Set – Part #2669🛠️ Smooth Suspension. Customizable Damping. Fine-tune your suspension with the Traxxas Shock Piston Head Set. This direct replacement set is designed to restore or customize the damping performance in your shocks—perfect for dialing in your setup for different track conditions or terrains. ✅ Genuine Traxxas quality for a precise fit✅ Ideal for rebuilds or suspension tuning✅ Keeps your shocks running smooth and responsive✅ Compatible with a variety of Traxxas vehicles 📦 Includes: (1) Shock Piston Head Set  

Read more less

Traxxas 4x15mm Countersunk Screws (6)Part #: 3167 Don’t let the small stuff slow you down! These Traxxas 4x15mm Countersunk Screws are a must-have for your toolbox. Designed to sit flush and secure, they’re perfect for keeping your rig dialed in and clean. Whether you're replacing worn hardware or building something new, this 6-pack has your back. Includes: (6) 4x15mm Countersunk Screws Built for durability. Backed by Traxxas. Ready for action.  

Read more less

Traxxas 3x10mm Washer-Head Machine Screws (6) – Part 3193Secure Fit. Wider Hold. Versatile Length. The Traxxas 3x10mm washer-head machine screws are a go-to solution when you need a reliable fastener with added grip. The integrated washer-style head distributes pressure evenly — ideal for fastening into plastic or securing sensitive components. ✅ Includes 6 washer-head machine screws✅ Size: 3x10mm – versatile length for multiple RC applications✅ Integrated washer head – prevents pull-through and distributes load✅ Standard 3mm thread – fits most 1/10 scale Traxxas vehicles✅ Perfect for mounting electronics, suspension parts, and body panels 📦 Includes: (6) 3x10mm Washer-Head Machine Screws Part #: 3193 💡 Pro Tip: Ideal for use in plastic components where added surface area helps prevent damage.  

Read more less

Traxxas 3x8mm Washer-Head Machine Screws (6) – Part 3185Built-In Grip. Extra Hold. Compact Size. The Traxxas 3x8mm washer-head machine screws provide a wider contact surface for more secure fastening — without needing a separate washer. Ideal for mounting components where extra grip is needed in a tight space. ✅ Includes 6 washer-head machine screws✅ Size: 3x8mm – compact length for low-clearance installs✅ Washer-style head – spreads load, prevents pull-through✅ Standard 3mm thread – compatible with most Traxxas builds✅ Perfect for mounting electronics, linkages, and body parts 📦 Includes: (6) 3x8mm Washer-Head Machine Screws Part #: 3185 💡 Pro Tip: Great for plastic parts where larger heads reduce the risk of cracking or stripping.  

Read more less

Traxxas 3x15mm Countersunk Machine Screws (6) – Part 3179Longer Reach. Flush Fit. Factory Reliable. The Traxxas 3x15mm countersunk machine screws are designed for secure fastening where a flush surface is needed — with a little more length for deeper mounting applications. ✅ Includes 6 precision-machined screws✅ Size: 3x15mm – great for thicker components or multiple layers✅ Countersunk head – installs flush for a smooth, clean finish✅ Standard 3mm thread – fits most Traxxas 1/10 scale builds✅ Perfect for chassis, skid plates, and hardware upgrades 📦 Includes: (6) 3x15mm Countersunk Machine Screws Part #: 3179 💡 Pro Tip: Ideal for use in areas where ground clearance matters or where screws pass through multiple materials.

Read more less