Compact power. Smart performance. Pure reliability.The Gens Ace 2S 35C G-Tech LiPo Battery Pack delivers dependable punch and long run times for 1/18-scale platforms like the Arrma Grom and Losi NASCAR. With G-Tech Smart Technology and a rugged iEC2 connector, this 2300mAh LiPo gives you clean, efficient power delivery and plug-and-play safety. Perfect for hobbyists who demand consistent voltage and reliable runtime in small-scale performance rigs. Small size. Big power. Built-in smarts.Engineered with precision-matched cells and low internal resistance, this pack provides smooth, stable output throughout each run. The soft case design fits tight battery trays, while the 35C discharge rate ensures crisp throttle response. Plus, the iEC2 plug prevents reverse connection and is fully compatible with EC2 and IC2 connectors for universal convenience. ⚡ Features 2300mAh capacity for longer driving sessions 35C continuous discharge rate delivers consistent power G-Tech Smart Technology for optimized charging and performance iEC2 connector compatible with EC2 and IC2 plugs Compact soft case ideal for 1/18-scale vehicles Factory-matched cells for reliable, balanced performance Designed for maximum safety and voltage stability ⚙️ Specifications Spec Value Nominal Voltage 7.4V (2S) Capacity 2300mAh Maximum Charge Rate 1C Discharge Rate (Continuous) 35C Cell Configuration 2S1P Watt Hours 17.02Wh Connector iEC2 Dimensions (L×W×H) 101×31×21mm (3.97×1.22×0.82in) Weight 115g (4.05oz) ROAR Approved No ⚠️ Important LiPo Safety Always use a LiPo-specific charger and balance charge Never leave batteries unattended while charging Do not overcharge, over-discharge, or short circuit Use a LiPo-safe bag/box for charging Allow pack to cool before recharging Store at 3.8V per cell for best cycle life ✅ Compatibility Arrma Granite Grom Arrma Mojave Grom Arrma Typhon Grom Losi NASCAR  

Read more less

⚙️ Built stronger. Built to last. Upgrade your ride with the Hot Racing Front Steel CVD Axle Set, designed for the Losi NASCAR and the Arrma Grom series (Granite Grom, Mojave Grom, Typhon Grom) equipped with the Arrma Grom Suspension B Set. Featuring CNC-machined steel stub shafts and aluminum clamp-style hex hubs, these axles deliver superior strength, durability, and smooth performance over stock CVD dog bones and plastic shafts. ✅ Direct replacement for factory CVD dog bones✅ Heavy-duty CNC steel + aluminum construction✅ Pre-assembled for quick, hassle-free install✅ Compatible with ARA330839 front arms & ARA330841 knuckles✅ Vehicle Compatibility: • Arrma Granite Grom • Arrma Mojave Grom • Arrma Typhon Grom • Losi NASCAR 📦 Includes:• (1) Front Steel CVD Axle Set (pre-assembled)• Aluminum wheel hex hubs 💡 Pro Tip: Apply a light layer of grease to CV joints for maximum performance and longevity.  

Read more less

Meet the EcoPower WP173 — a high-voltage, high-torque, high-speed aluminum micro servo built to dominate the 1/16 & 1/18 scale world. Waterproof, fully metal-geared, and engineered for precision, this servo is the ultimate upgrade for Traxxas®, Axial®, Losi®, Arrma® Grom™, TRX-4M™ (with mount), and more. Designed for brutal performance and long-term durability, the WP173 packs a coreless motor, an aluminum case, and torque numbers that punch way above its size. High-Performance Speed & Torque Whether you're racing, crawling, or bashing, the WP173 delivers lightning-fast response and incredible power: Speed: 0.09 sec/60° @ 6.0V 0.07 sec/60° @ 8.4V Torque: 123 oz-in @ 6.0V 173 oz-in @ 8.4V Smooth, crisp control — even under heavy load. Built for Abuse This servo is ready for the rough stuff: Full metal gear train Waterproof aluminum case Ball-bearing supported output Includes aluminum servo horn Long-lasting durability for harsh environments Wide Compatibility A true drop-in powerhouse for most micro platforms: Arrma® Grom Series:Gorgon • Granite • Mojave • Quake • Typhon Axial:1/18 Yeti Jr FMS:FCX18 • FCX24 • FCX24M Furitek:Cayman • Cayman Pro • FX118 • Gold Digger • Hiroyama • TerraX Losi:Mini Drag • Mini-B • Mini-T 2.0 • NASCAR Redcat:Ascent-18 Traxxas:TRX-4M™ & TRX-4MT™ (Requires EcoPower CNC Aluminum Servo Mount ECP-3072) Features: High torque + high speed performance Waterproof aluminum case Digital coreless motor Full metal gear construction Aluminum servo horn included 25-tooth output shaft (standard micro) Operates from 6V–8.4V Compact size for 1/16 & 1/18 models Built for racers, crawlers, and bashers Includes: (1) EcoPower WP173 Aluminum Digital Micro Servo (1) Aluminum Servo Horn (2) Composite Servo Horns Mounting Hardware Specifications: Application: 1/24, 1/16, 1/18 Input Voltage: 6V–8.4V Speed: 0.09 sec/60° @ 6.0V 0.07 sec/60° @ 8.4V Torque: 123 oz-in @ 6.0V 173 oz-in @ 8.4V Motor: Digital Coreless Output Shaft: 25T • 5mm Gear Material: Metal Dimensions: 23 × 12 × 31.75mm Weight: 23g Tech Notes: Do not exceed 8.4V. Waterproof, but prolonged submersion may weaken seals. TRX-4M platforms require the EcoPower ECP-3072 Aluminum Servo Mount.

Read more less

Precision Steering. Proven Durability. Refresh or upgrade your steering setup with the Team Associated V2 Caster & Steering Blocks Set, designed specifically for the RC10T7 and RC10SC7 platforms. Built with Factory Team precision, these components deliver smooth steering response, consistent caster geometry, and the toughness to handle intense race conditions. V2 Performance Upgrade The updated V2 design refines steering feel and durability for improved handling and corner-entry precision. Whether you’re maintaining your race truck or tuning for optimal performance, these blocks keep your setup tight, aligned, and race-ready. Features: Genuine Team Associated V2 design for RC10T7 / RC10SC7 Provides precise steering response and consistent caster angle Durable composite construction built for high-stress racing Factory Team engineered for reliability and fit Includes: (1) RC10T7 V2 Caster & Steering Blocks Set Compatibility: Team Associated RC10 SC7 Team Associated RC10 T7 Team Associated Factory Team — Engineered to Win.    

Read more less

🚀 Drop Weight. Gain Speed. Win Races. If you’re serious about squeezing every bit of performance out of your Losi NASCAR, this is one of those upgrades that just makes sense. The Exotek EXO2278 aluminum driveshaft cuts rotational weight dramatically—helping your car rev quicker, accelerate harder, and run smoother lap after lap. 💪 Performance You Can Feel Built from hard-anodized 7075 aluminum, this shaft weighs in at just 7 grams compared to the stock 22g steel unit. That’s a massive reduction in rotating mass—translating to: Faster spool-upHigher RPM potentialCooler motor tempsImproved throttle response🏁 Race-Ready Design The rounded center section trims even more weight while maintaining strength, and the precision machining ensures: Smooth, efficient power transferReduced drivetrain slopLess wear over timeConsistent performance every run🔧 Why You Want It This isn’t just a “nice upgrade”—it’s a noticeable performance gain on track. Less drag, less stress on your drivetrain, and more usable power where it counts. ✅ FeaturesHard-anodized 7075 aluminum constructionUltra-lightweight at 7 gramsRounded center for reduced rotational massSmoother, more efficient drivetrain operationIncreased durability and wear resistancePrecision fit for Losi NASCAR platform📦 Includes(1) Aluminum Lightweight Center Driveshaft🔧 FitsLosi NASCAR 💥 Limitless Tip: Pair this with proper gearing (like your 21T pinion on Super Speedway) and you’ll really feel the difference on the straightaways.

Read more less

Power your LC Racing vehicle with the LC Racing 2200mAh 7.4V 50C Hardcase LiPo Battery, a compact high-performance pack built for power, consistency, and durability. Co-engineered with Gens Ace, this LiPo delivers strong punch, reliable voltage, and long cycle life in a perfectly sized hardcase pack for LC Racing’s 1/14–1/16 platforms. 🔥 Key Features: Genuine Gens Ace-manufactured LiPo, branded for LC Racing 2200mAh 7.4V (2S) capacity with 50C discharge rate Hardcase design protects against impact and puffing Compact dimensions: 18×32×93mm, weight 100g Includes foam spacer for a snug fit in smaller battery trays Comes with charge/balance adapter (3.5mm bullets to Deans-style T plug) Ideal for racers needing dependable, high-output performance ✅ Compatibility: LC Racing BHC, EMB, PTG, and other 1/14–1/16 scale vehicles Works in other mini RC models using 2S LiPo with Deans connector 📦 Includes: (1) LC Racing 2200mAh 7.4V 50C Hardcase LiPo Battery (1) Short charge/balance adapter (3.5mm bullet to Deans-style T plug) (1) Foam spacer for fitment adjustment ⚠️ Tip:Always charge using a LiPo-compatible charger in balance mode, and never leave unattended while charging. Check voltage before storage to maintain battery health. 🏎️ Recommended For: 1/14–1/16 scale Buggy, Rally, and Truggy racing applications Perfect drop-in power upgrade for LC Racing EMB and BHC platforms

Read more less

⚙️ Strength where it matters most. Upgrade your rear drivetrain with the Hot Racing Rear Steel CVD Axle Set, built for Losi NASCAR and Arrma Grom series vehicles (Granite Grom, Mojave Grom, Typhon Grom). Crafted from CNC-machined steel and paired with aluminum clamp-style hex hubs, these axles deliver superior strength, smooth operation, and better durability than factory dog bones and plastic shafts. ✅ Direct replacement for stock CVD dog bones✅ Heavy-duty CNC steel construction✅ Pre-assembled for quick installation✅ Aluminum wheel hex hubs for improved reliability✅ Compatible with ARA330840 rear arms & ARA330841 knuckles✅ Vehicle Compatibility: • Arrma Granite Grom • Arrma Mojave Grom • Arrma Typhon Grom • Losi NASCAR 📦 Includes:• (1) Rear Steel CVD Axle Set (pre-assembled)• Aluminum wheel hex hubs 💡 Pro Tip: Apply a light coat of grease to CV joints for smoother performance and extended life. 📦 Includes: • (1) Front Steel CVD Axle Set (pre-assembled)• Aluminum wheel hex hubs 💡 Pro Tip: Apply a light layer of grease to CV joints for maximum performance and longevity.  

Read more less

Stronger. Stiffer. Smarter. Push your setup to the next level with the Factory Team Carbon V2 Caster & Steering Blocks Set, designed for the RC10T7 and RC10SC7 platforms. Crafted from Team Associated’s legendary carbon composite material, this high-performance upgrade delivers exceptional rigidity, reduced flex, and race-winning precision for serious competitors. Factory Team Engineering Developed by Team Associated’s Factory Team division, these Carbon V2 Caster & Steering Blocks are built for racers who demand consistent steering feel and maximum durability under pressure. The improved carbon design minimizes deflection for more accurate cornering response and improved high-speed stability, giving you total control lap after lap. Features: Constructed from AE carbon composite material for maximum strength and precision Increased rigidity reduces unwanted flex under load Enhanced durability for high-stress racing environments Improved handling consistency and cornering feedback Factory Team quality ensures perfect fit and race-ready reliability Includes: (1) Front Factory Team Carbon V2 Caster & Steering Blocks Set Compatibility: Team Associated RC10 SC7 Team Associated RC10 T7 Team Associated Factory Team — Engineered to Win.

Read more less

Dial in your suspension and steering geometry with the Hot Racing Aluminum Adjustable Camber & Steering Links Set, engineered specifically for the Losi NASCAR platform. Designed for precision, durability, and easy tuning, this upgrade gives you greater control over handling and steering response. Machined from durable aluminum, these adjustable links replace the stock components to provide increased strength and more accurate alignment control. Quick camber and toe-in adjustments allow you to fine-tune your setup for different track conditions, improving steering feel, stability, and overall performance. Built for OEM fitment, installation is straightforward and hassle-free. Features CNC-machined aluminum construction for increased strength Adjustable design for precise camber and toe-in tuning Improves steering response and handling consistency Durable upgrade over stock plastic links OEM fit for easy installation and proper geometry Includes (1) Aluminum Adjustable Camber & Steering Links Set A perfect upgrade for racers and drivers looking to improve durability, tuning flexibility, and on-track performance from their Losi® NASCAR.  

Read more less

Fine-tune your gearing with the Team Associated 48 Pitch, 69 Tooth Spur Gear. This optional upgrade offers smooth, efficient power transfer and allows racers to dial in the perfect gear ratio for their setup. 🔥 Key Features: Precision-molded 48 pitch, 69 tooth spur gear Provides smooth, efficient drivetrain performance Optional tuning part for gearing adjustments Genuine Team Associated quality for durability and accuracy ✅ Compatibility: Team Associated Apex Team Associated TC5 Team Associated TC6.1 Team Associated TC6.2 Team Associated TC7 (Original) Team Associated TC7.1 Team Associated TC7.2 📦 Includes: (1) 48P Spur Gear (69T) ⚠️ Tip:Pair with the right pinion gear to optimize top speed vs. acceleration for your track conditions.  

Read more less

Dial in your handling and cornering performance with the Hot Racing Anti-Roll Sway Bar Set for Arrma Grom platforms. This precision upgrade reduces chassis roll and improves stability, giving your rig more control and speed through corners on any surface. Designed for performance tuning, this set allows you to fine-tune front and rear roll stiffness, helping balance your setup for different track conditions. The color-coded sway bars make it easy to identify thickness options at a glance, while the durable, rust-resistant construction ensures long-lasting performance. 🔧 Features:• Designed specifically for Arrma Grom platforms• Improves cornering stability and overall handling• Allows tuning of front and rear suspension stiffness• Color-coded sway bars for quick identification• Durable, rust-resistant construction• Precision fit for consistent performance 📦 Includes:• (1) Front & Rear Anti-Roll Sway Bar Set ⚙️ Specifications:• Material: Aluminum components with steel sway bars ⚠️ Tech Note:• Requires Hot Racing suspension arms (GRM55N01 & GRM56N01)• Not compatible with stock suspension arms ✅ Compatibility:• Arrma Granite Grom• Arrma Mojave Grom Take control of your chassis and carry more speed through the corners with the Hot Racing sway bar set, built for racers who want sharper handling and better overall performance.      

Read more less

Experience uncompromising power and consistency with the Gens Ace Redline 2.0 2S Shorty LiHV Battery. Designed for high-performance racing, this pack delivers exceptional punch, low internal resistance, and stable voltage from start to finish. Perfect for 1/10 scale off-road, on-road, and touring applications where balance and efficiency are critical. 🔥 Key Features: High Voltage (LiHV) 7.6V design for increased power output 140C discharge rate for explosive acceleration and sustained punch 5300mAh capacity delivers both power and endurance Factory cell matching ensures maximum performance and consistency Low internal resistance (IR) for stable voltage under load Compact shorty pack size for ideal chassis weight distribution 5mm bullet connectors for secure, low-resistance connections Built with stable automatic stacking technology and strict cell matching Lightweight and low-profile design for racing efficiency 📐 Specifications: Nominal Voltage: 7.6V (2S LiHV) Capacity: 5300mAh Continuous Discharge: 140C Charge Rate: 1C (5.3A max recommended) Configuration: 2S2P Watt Hours: 40.28Wh Battery Connector: 5mm Bullet Balance Connector: 2mm Bullet Dimensions (L×W×H): 96 × 47 × 22.5mm Weight: 7.02oz (199g) ✅ Compatibility: Ideal for 1/10 scale off-road and on-road racing Perfect for Team Associated, XRAY, TLR, Yokomo, and Schumacher chassis setups Compatible with Touring Car (TC6/TC7) platforms and other vehicles using 2S shorty packs 📦 Includes: (1) Gens Ace Redline 2.0 2S Shorty LiHV 5300mAh 140C Battery (1) Set of 5mm Bullet Connectors ⚠️ Important Safety Information: Always use a LiPo-compatible charger — never charge unattended. Always balance charge and use a LiPo Safe charging bag. Do not overcharge, over-discharge, or store above 35°C. Allow battery to cool before recharging after use. For best cycle life: charge fully before first use and discharge only 50% for first 5 cycles. 🏎️ Recommended For: 1/10 Scale Buggy, Stadium Truck, Short Course Truck, and Touring Car racing Perfect balance of voltage, runtime, and punch for both spec and modified classes

Read more less

Upgrade your front-end strength and steering precision with this Powerhobby aluminum steering knuckle. CNC-machined from high-quality aluminum, this is a direct replacement for the stock plastic part, offering improved durability and consistent steering performance. Features: CNC-machined aluminum construction Increased strength and durability over stock Precision fit for smooth, reliable steering Available in Red, Black, or Blue anodized finishes Fits: Arrma 1:18 Mojave Grom Losi 1:12 AWD NASCAR Replaces: ARA330841 Perfect for racers and bashers looking to reduce flex, improve reliability, and add a custom look.  

Read more less

Engineered for compact performance, the Zeda Power 1500mAh 2S LiPo is the perfect power source for your LC Racing BHC-1 or other mini RC platforms. With a high 60C discharge rate and a compact footprint, this pack delivers punchy acceleration and consistent runtime in tight spaces. ⚙️ Specifications: Capacity: 1500mAh Voltage: 7.4V (2S) Discharge Rate: 60C Dimensions: 17.5 x 35 x 69mm Plug Type: T Plug (Deans-style) Balance Lead: Yes (JST-XH) ✅ Perfect For: LC Racing BHC-1 • • Other 1/14 & 1/16 scale mini RC models requiring a compact 2S LiPo

Read more less

Tougher. Stronger. Built for the Groms. Keep your Grom running smooth and durable with the Arrma Mod 0.5 Metal Spur Gear (59T) — a precision-engineered upgrade built to handle more power, more torque, and more action. Perfect for racers and bashers alike, this gear delivers long-lasting performance and dependable strength you can count on. Performance & Durability Crafted from high-quality metal, this spur gear replaces the stock plastic version for enhanced wear resistance and smoother power transfer. Whether you’re bashing, racing, or just pushing limits, this upgrade keeps your drivetrain solid and reliable under heavy load. Features: Durable metal construction for extreme strength Smooth, reliable performance under high torque Ideal replacement or upgrade part Precision-fit Mod 0.5 design Includes: (1) 59T Mod 0.5 Metal Spur Gear Compatibility: Arrma Granite Grom Arrma Mojave Grom Arrma Typhon Grom Losi NASCAR Arrma Tough — Don’t Just Bash. Blast.    

Read more less

Overview:Upgrade your TC8’s precision and performance with the 1UP Racing Aluminum DirectHex Hub Axles — the ultimate solution for racers who demand accuracy, strength, and zero slop in every corner. About the Aluminum DirectHex Hub AxlesExpertly CNC-machined from high-grade 7075 aluminum, these DirectHex axles feature a true hex interface that completely eliminates the play and inconsistency of clamping-style hubs. The lightweight design reduces rotating mass, while the durable black anodized finish and laser-etched markings give a clean, professional look. Each set includes premium 6x10x3 Cv2 Pro bearings and o-rings for smooth operation and reliable fitment. Features: True hex interface — zero slop, no clamping distortion Precision-machined from 7075-T6 aluminum for strength and low weight Black anodized finish with laser-etched 1UP logo and hex size Includes premium 6x10x3 Cv2 Pro bearings Available in 4 mm, 5 mm, and 6 mm offsets for fine-tuned handling Four o-rings included for secure, consistent installation Race-proven design for the Team Associated TC8 platform Includes: (2) Team Associated TC8 Aluminum DirectHex Hub Axles (5 mm Offset)

Read more less

  🏁 High-Precision Touring Car Wheels for Consistent PerformanceThe Yokomo 12mm Hex Precision Medium Narrow Touring Car Wheels deliver accuracy, balance, and strength — essential for competitive 1/10 scale touring car racing. Designed with Yokomo’s signature precision molding, these wheels provide perfect roundness, optimal stiffness, and a consistent mounting surface for your tires, ensuring smooth and predictable handling on every lap. ⚙️ About the Yokomo Medium Narrow Wheels With a 24mm width and 0mm offset, these wheels are ideal for a wide range of track conditions, offering excellent rigidity while maintaining the flex needed for consistent grip. The durable composite material resists deformation under high cornering loads, helping you maintain consistent traction and speed through the turns. 🌟 Features Precision-molded 24mm wheels for smooth and accurate rotation 0mm offset for standard touring car fitment Medium narrow design ideal for both carpet and asphalt tracks Durable composite construction resists flex and deformation 12mm hex fitment for universal compatibility White finish for a clean, professional look 📦 Includes (4) Yokomo 12mm Hex Medium Narrow Touring Car Wheels (White) 🚗 Compatibility Yokomo BD10 Yokomo BD7 (Original, 2014, 2016) Yokomo BD8 (2017, 2018) Yokomo RS1.0 Fits most 1/10 scale touring cars with 12mm hex hubs ⚡ Trusted by top racers worldwide — Yokomo Precision Touring Car Wheels deliver the stability, balance, and quality your setup deserves.

Read more less

Unleash extreme power and efficiency with the Gens Ace Redline 2.0 2S LiHV 8500mAh 140C Battery. Engineered for competitive RC racing, this pack combines massive capacity, ultra-low internal resistance, and a high 140C discharge rate to deliver stable voltage, explosive acceleration, and unmatched endurance. Perfect for racers who demand consistent performance through the entire run. 🔥 Key Features: High Voltage (LiHV) 7.6V output for maximum speed and power 140C continuous discharge for exceptional punch and consistency 8500mAh capacity delivers long runtime and balanced weight Factory-matched cells for uniform voltage, capacity, and resistance Low IR design ensures stable voltage under heavy load 5mm bullet connectors provide secure, low-loss connections Built using stable automatic stacking technology for reliability Lightweight and low-profile design for chassis balance and fit 📐 Specifications: Nominal Voltage: 7.6V (2S LiHV) Capacity: 8500mAh Continuous Discharge: 140C Charge Rate: 1C (8.5A max recommended) Configuration: 2S1P Watt Hours: 64.4Wh Battery Connector: 5mm Bullet Balance Connector: 2mm Bullet Dimensions (L×W×H): 139 × 47 × 25mm Weight: 10.65oz (302g) ✅ Compatibility: Ideal for 1/10 & 1/8 scale surface applications Perfect for Team Associated, XRAY, TLR, Yokomo, and Schumacher racing platforms Works with Touring Car (TC6/TC7 series), 4WD Buggies, Truggies, and Short Course Trucks requiring 2S packs 📦 Includes: (1) Gens Ace Redline 2.0 2S LiHV 8500mAh 140C Battery (1) Set of 5mm Bullet Connectors ⚠️ Important Safety Information: Always balance charge using a LiPo-compatible charger and LiPo safe bag. Never leave charging batteries unattended. Do not overcharge or discharge below 3.2V per cell. Allow batteries to cool completely before recharging. Follow proper break-in procedure for new packs (first 5 cycles at 50% discharge). 🏎️ Recommended For: 1/10 & 1/8 scale Buggy, Truggy, Touring Car, and Short Course Truck racing Ideal for spec and modified classes needing high voltage and long runtime

Read more less

Power your race machine with the Reedy Zappers HV SG6 Ultra Low Profile 2S LiPo Battery. Built for the demands of competitive RC, this pack delivers lightning-fast discharge, superior voltage retention, and rock-solid durability to keep you at peak performance lap after lap. ✅ Ultra Low Profile Design – Lowers center of gravity for sharper handling✅ 135C High Discharge Rating – Delivers extreme power output for racing applications✅ Flat Discharge Curve – Maintains consistent voltage through the entire run✅ State-of-the-Art Chemistry – Reduced internal resistance and improved cycle life✅ Meets Racing Standards – Built to ROAR, EFRA, BRCA, and IFMAR specifications Includes: (1) Zappers HV SG6 2S Ultra Low Profile 135C LiPo Battery (7.6V/6000mAh) 5mm Bullet Connectors Specifications: Nominal Voltage: 7.6V (2S HV LiPo) Capacity: 6000mAh Maximum Charge Rate: 2C (12A) Discharge Rate: 135C Peak Cell Configuration: 2S2P Watt Hours: 45.6Wh Connector: 5mm Bullet (battery), 2mm Bullet (balance) Dimensions (LxWxH): 139 x 47 x 19.5mm (5.47 x 1.85 x 0.77in) Weight: 247g (8.71oz) ROAR Approved: Yes ⚡ Take your racing to the next level with reliable power, ultra-low profile design, and championship-ready performance.

Read more less

Arrma Differential Cover Set (2-Pack) Protect & Maintain Your Differential The Arrma Differential Cover Set is a direct replacement part designed for Arrma Grom series vehicles and Losi NASCAR models. Built for durability and precision fit, these covers help protect your differential from dirt, debris, and damage, ensuring smooth and reliable performance on any terrain. Includes: ✅ (2) Differential Covers✅ Mounting Hardware Compatibility: ✔ Arrma Granite Grom✔ Arrma Mojave Grom✔ Arrma Typhon Grom✔ Losi NASCAR

Read more less

Secure your batteries with confidence using the Powerhobby 25×450mm Battery Straps. Designed for strength and reliability, these straps keep your packs firmly in place during hard acceleration, jumps, and rough landings. Features & Benefits: Durable hook-and-loop design for a secure hold 25mm width x 450mm length fits a wide range of battery sizes Helps prevent battery movement during high-impact driving Ideal for racing, bashing, and high-power setups Includes: Battery strap(s) (25×450mm) A simple but essential upgrade to keep your battery locked in and your electronics protected.  

Read more less

Upgrade front-end durability with this Powerhobby aluminum front gear box. CNC-machined from aluminum and anodized for a clean finish, it’s a direct replacement for the stock unit and helps reduce flex under load. Features: CNC-machined aluminum construction Increased strength and rigidity over stock plastic Precision fit for reliable drivetrain performance Available in Black, Red, or Blue anodized finishes Direct replacement design Fits: Arrma 1:18 Granite Grom Arrma 1:18 Typhon Grom Arrma 1:18 Mojave Grom Losi 1:12 AWD NASCAR Part Number: PHB6565    

Read more less

Upgrade durability and front suspension strength with these Powerhobby aluminum front upper arms. CNC-machined from aluminum and anodized for a clean finish, these arms are a direct replacement for the stock components and help reduce flex during hard driving. Features: CNC-machined aluminum construction Increased strength over stock plastic arms Precision fit for consistent suspension geometry Available in Red, Black, or Blue anodized finishes Fits: Arrma 1:18 Mojave Grom Losi 1:12 AWD NASCAR Part Number: PHB6846 Ideal for racers and bashers looking to improve durability while adding a custom look to their NASCAR or Grom platform.  

Read more less

Refresh your hardware and keep your rig running strong with the Arrma 3x24mm Button Head Screw Pin Set. Designed as a direct replacement for stock kit components, these screw pins deliver reliable fitment and durability for repeated wrench sessions and rough terrain. Ideal for repairs, maintenance, or building a parts bin, this set gives you everything you need to keep your suspension and linkages tight and secure. 🟢 Features Direct stock replacement hardware Durable steel construction Precision fit for secure assembly Great for routine maintenance or rebuilds 📦 Includes (10) 3x24mm Button Head Screw Pins 🔧 Compatibility Designed for the following models: Arrma Gorgon Grom Granite Grom Mojave Grom Quake Grom Typhon Grom Losi NASCAR 🏁 Keep Your Rig Running Tight A must-have hardware pack for anyone running the latest Grom-platform rigs—simple, durable, and ready to install.

Read more less

Officially Licensed NASCAR Style. Track-Proven Performance. Upgrade your Losi NASCAR GROM with the Ross Chastain #1 Busch Light 2025 Body, delivering the authentic look and attitude of Chastain’s real-world race car. This pre-painted, officially licensed body features high-quality graphics, durable construction, and pre-installed details for a race-ready fit right out of the box. Premium Ready-to-Run Detail Each body comes pre-painted with official Busch Light 2025 graphics, decal sheet pre-applied, and paint protection film installed to keep your GROM looking fresh after every run. Precision pre-drilled body mounts make installation effortless — just drop it on and go racing. Features: Officially licensed Ross Chastain #1 Busch Light 2025 body Pre-painted and pre-decaled for instant realism Paint protection film pre-installed to prevent scratches Durable molded body for long-lasting performance Pre-drilled mounting holes for direct fit on all NASCAR GROM vehicles Includes rear spoiler for added scale realism Includes: (1) Officially Licensed 2025 #1 Busch Light NASCAR GROM Body (1) Rear Spoiler Paint Protection Stickers (pre-installed) Compatibility: Losi NASCAR GROM Losi — Official NASCAR Performance in Mini Scale.

Read more less

Officially Licensed NASCAR Style for Your GROM. Bring championship looks to your Losi NASCAR GROM with the Christopher Bell #20 DeWalt 2025 Body Set. This officially licensed body features authentic graphics, precision detailing, and durable construction — built to capture the look of Bell’s powerful #20 DeWalt Toyota on the track. Perfect for racers and collectors, this body delivers premium realism and performance-ready design. Features: Officially licensed NASCAR Christopher Bell #20 DeWalt 2025 design High-quality molded body for durability and scale appearance Detailed printed graphics replicate the real DeWalt Toyota scheme Direct fit for Losi NASCAR GROM chassis Perfect upgrade for replacement, customization, or display Includes: (1) Christopher Bell #20 DeWalt 2025 NASCAR GROM Body Compatibility: Losi NASCAR GROM Losi — Where Real Racing Meets RC Power.

Read more less

Smoother Rotation. Faster Corner Speed. Upgrade your XRAY X4 with the 58mm ECS BB Drive Shaft Set, engineered for maximum efficiency and precision handling. Featuring a ball-bearing inner assembly, this advanced driveshaft dramatically reduces friction for smoother steering response and improved corner speed — giving you the ultimate edge on the track. Precision Engineering by XRAY Built for professional performance, the ECS BB (Ball-Bearing) design minimizes joint wear, delivers more consistent power transfer, and enhances overall drivetrain smoothness. Ideal for competitive touring racers seeking razor-sharp control and acceleration through every turn. Features: Ball-bearing inner assembly for ultra-smooth rotation Reduces friction for faster cornering and improved stability Increases drivetrain efficiency and steering precision Durable, high-quality materials for long-lasting performance Genuine XRAY Factory Team upgrade Includes: (1) 58mm ECS BB Drive Shaft Set (unassembled) Note: Must be used with XRAY Gear Differential BB CVD Outdrives (XRA304972) – sold separately Compatibility: XRAY X4 XRAY — The Art of Performance.    

Read more less

Overview:Upgrade your touring car with the ultimate combination of lightweight performance and precision engineering. The 1UP Racing Pro Duty Titanium Lower Shock Screws are built for racers who demand strength, accuracy, and efficiency on every lap. CNC-machined from aerospace-grade titanium, these screws eliminate unnecessary unsprung weight while providing unmatched reliability and alignment accuracy for your shocks. About the Pro Duty Titanium Lower Shock Screws Titanium Strength AdvantagePrecision-machined from 6AL4V Grade 5 titanium, each screw delivers exceptional strength and corrosion resistance at a fraction of the weight of steel. The LH (left-hand) threads ensure the screws stay locked in place, even through long mains and rough track conditions. A thin integrated flange keeps the shock eye perfectly centered, while a deep 1.5 mm hex ensures consistent torque and tool engagement over countless installs. Designed specifically for plastic or composite suspension arms, these Pro Duty screws are race-proven and trusted by top-level drivers for their consistent feel and superior longevity. Features Ultra-lightweight — just 0.93 g per set of four Aerospace-grade 6AL4V (Grade 5) titanium construction CNC-machined for perfect precision Left-hand threads prevent loosening under load Built-in flange keeps shocks centered Deep 1.5 mm hex resists rounding Stronger, lighter, and more durable than steel hardware Compatible with most 1/10-scale touring cars Includes (4) Pro Duty Titanium 1/10 On-Road Lower Shock Screws Team Associated RC10 B6.4D Includes: (1) Complete Titanium Upper Screw Set (for RC10 B6.4/B6.4D)  

Read more less

Overview:Take your Team Associated TC8’s performance and style to the next level with the 1UP Racing CF1 Carbon Fiber Front Bumper Brace and Body Mount Plate — precision-engineered for strength, rigidity, and race-winning consistency. About the CF1 Bumper Brace & Body Mount PlateDesigned and manufactured in the USA, this premium carbon fiber upgrade provides a durable, lightweight solution that enhances the handling characteristics of your TC8. The dual-level layout mirrors the rear plate for balanced rigidity, while additional body mount locations improve shell fitment and aerodynamics. CNC-machined from top-grade carbon fiber, this plate offers a tight, perfect fit and a confidence-inspiring driving feel — ideal for high-traction track conditions. Features: Made in the USA 🇺🇸 Super lightweight carbon fiber construction One-piece design minimizes chassis flex Dual-level layout matches the rear plate for balance Adds extra body mount locations for improved fitment CNC-machined for precision and easy installation Increases cornering speed and handling stability Designed for high-traction race tracks Includes: (1) CF1 Carbon Fiber Front Bumper Brace & Body Mount Plate

Read more less

Aerodynamics perfected.Dominate the track with the PROTOform P63 High-Performance 190 mm Touring Car Body, crafted using the latest aerodynamic technology for maximum downforce, efficiency, and razor-sharp handling. The aggressive cab-forward design delivers enhanced front-end traction, while the sculpted sides increase side-bite and stability through high-speed corners. Precision Design. Pro-Level Performance.A recessed trunk section lowers the center of gravity and stiffens the body, while the high-flow rear bumper reduces drag and maximizes airflow. Every contour was tested for real racing advantage—giving your 190 mm sedan that extra edge in a highly competitive class. PROTOform’s signature mounting marks inside the front wheel arches make body positioning easy in 2 mm increments (up to +8 mm), with additional reference marks on the hood, trunk, and rear bumper for a perfect chassis fit every time. 💨 Features: Radical high-downforce design with cab-forward layout Stiffened hood ribs for reduced flex Recessed trunk for low CG and extra rigidity Sculpted side panels for increased side-bite High-flow rear bumper for reduced aerodynamic drag PRO-Lite 0.5 mm weight – perfect balance of speed and durability Made in the USA 📏 Specifications: Scale: 1/10 Touring Car Length: 16.7" (424 mm) Width: 7.53" (191 mm) Height: 4.53" (115 mm) Wheelbase: 10.1" (257 mm) 📦 Includes: (1) Clear PROTOform P63 190 mm Body (0.5 mm Pro-Lite) Window-mask and decal sheet Factory-applied overspray film Plastic wing buttons, under-wing nuts, and 3 mm mounting screws ⚠️ Note: Painted body shown is for display only. Body ships clear and unpainted.  

Read more less

🏎️ Precision Steering Replacement for Grom & Losi NASCAR PlatformsThe Arrma NASCAR / Grom Steering Set is a genuine factory replacement designed to restore smooth and accurate steering performance on select Arrma Grom vehicles and the Losi NASCAR. Built for durability and precision, this set ensures dependable control and tight steering response whether you’re racing, bashing, or practicing on the track. ⚙️ About the Steering Set Engineered from high-quality composite and metal hardware, this complete steering assembly includes all necessary components to replace worn or damaged stock parts. The optimized geometry helps maintain consistent steering angles and alignment for reliable handling across all surfaces. 🌟 Features Durable composite construction for long-lasting performance Direct OEM replacement — easy installation, no modifications required Restores accurate steering geometry and alignment Includes all key components: arms, tie bar, and hardware Designed for multiple platforms including Arrma Grom and Losi NASCAR 📦 Includes (2) Steering Arms (1) Tie Bar (2) Screw Pins (1) Hinge Pin 🔩 Compatibility Arrma Granite Grom Arrma Mojave Grom Arrma Typhon Grom Losi NASCAR 🛠️ Restore precise, responsive steering control with the Arrma NASCAR / Grom Steering Set — built to factory specs for dependable performance on and off the track.    

Read more less

Take your TC8 to the next level with the Factory Team Carbon Fiber Battery Mount Set. This precision upgrade offers a lightweight, rigid solution that enhances battery security, reduces chassis flex, and makes on-the-fly adjustments easier than ever. Perfect for serious racers looking for consistent performance and superior handling. ✅ Ultra-Light Carbon Fiber – Strong, durable, and race-ready✅ CNC Machined – Precision fit with pro-level finish✅ Battery Flexibility – Supports both standard and LCG shorty packs✅ Performance Boost – Reduces flex for sharper response✅ Quick Adjustments – Easily fine-tune battery position front-to-rear Includes: (1) Factory Team Carbon Fiber Battery Mount Set Compatibility: Team Associated RC10TC8  

Read more less

Overview:The Tamiya TT-02R 4WD Touring Car Chassis Kit is a high-performance, race-ready evolution of the popular TT-02 platform. Featuring numerous upgraded parts right out of the box, the TT-02R is designed to deliver sharper handling, improved durability, and greater adjustability for both club racing and fun high-speed runs. With its shaft-driven 4WD system, reinforced components, and blue anodized aluminum upgrades, the TT-02R offers the perfect balance of performance and value. Features: Shaft-driven 4WD TT-02R chassis kit Includes upgraded parts compared to standard TT-02: Full ball bearing set for smoother efficiency Blue anodized aluminum drive shaft & prop joints Adjustable upper arms and steering system for fine-tuning High-speed gear set included Oil-filled CVA shocks for consistent damping Metal motor mount for durability Reinforced resin components for added strength Sleek blue anodized aluminum hardware adds Factory Team style Tunable for different track conditions with multiple setup options Specifications: Scale: 1/10 Drive: 4WD shaft-driven Length: 376mm Width: 182mm Wheelbase: 257mm Chassis: TT-02R (upgraded variant) Motor: Not included (540-size recommended) Includes: (1) Tamiya TT-02R 4WD Touring Car Chassis Kit Upgraded hop-up parts pre-included Instruction manual Needed to Complete: 2-channel radio system Electronic speed control (ESC) 540 motor 7.2V NiMH or 7.4V LiPo battery & compatible charger 1/10 scale touring car body 1/10 touring car wheels & tires Polycarbonate paint for body Part Number: TAM47326 ⚡ Pro Tip: Pair this chassis with a low-profile servo and a sensored brushless system for the ultimate in precision and performance on the track.

Read more less

Keep your Losi NASCAR running smooth and race-ready with the LOS-1930 Center Driveshaft! Designed as a direct replacement for the Losi 1/12 NASCAR platform, this driveshaft helps deliver reliable power transfer and consistent performance lap after lap.Perfect for replacing worn or damaged drivetrain components and getting your car back on the track fast. 🏁Features: Genuine Losi replacement part Direct fit for the Losi 1/12 NASCAR platform Durable construction for dependable performance Helps maintain smooth drivetrain operation Includes: (1) Center Driveshaft  Compatibility: Losi NASCAR 1/12 Platform  

Read more less

Upgrade strength and protection where it matters most with the Hot Racing Aluminum Rear Differential Gear Cover. Designed for the Arrma Grom platform, this CNC-machined upgrade delivers increased durability, improved heat dissipation, and reduced flex for more consistent drivetrain performance. Constructed from high-strength 7075 aluminum, this cover helps protect the rear differential from impacts and wear while keeping temperatures under control during hard runs. The rigid design minimizes flex, improving gear alignment and overall drivetrain efficiency—especially in rough terrain and high-load conditions. 🔧 Features:• Precision CNC-machined 7075 aluminum construction• Provides maximum protection for rear differential components• Helps reduce flex for improved drivetrain performance• Enhances heat dissipation under heavy use• Durable, corrosion-resistant black finish• Easy installation for quick upgrades 📦 Includes:• (1) Aluminum Rear Differential Gear Cover ⚙️ Specifications:• Material: 7075 Aluminum• Color: Black ✅ Compatibility:• Arrma Mojave Grom Built for durability and performance, the Hot Racing rear diff cover is a must-have upgrade to protect your drivetrain and keep your Grom running strong.    

Read more less

Spur Gear Overview: Keep your drivetrain running smooth and efficient with the Team Associated RC10TC8 64P 92-Tooth Spur Gear. Designed specifically for the RC10TC8 chassis, this precision-cut gear delivers consistent mesh, quiet operation, and dependable durability — perfect for both racing and high-performance touring setups. A must-have replacement item for wear, damage, or gearing adjustments. Features Precision-molded 64 pitch gear profile Smooth, reliable operation for competitive on-road racing Direct factory replacement for the RC10TC8 Ideal for fine-tuning gearing and performance Compatibility Team Associated RC10TC8 Includes (1) 92T 64P Spur Gear

Read more less