Upgrade from brushed to brushless the easy way with the Traxxas BL-2s power system combo. Designed as a direct, user-friendly performance upgrade, this combo delivers the efficiency, speed, and durability of brushless power while keeping Traxxas’ legendary simplicity and reliability. The water-resistant BL-2s ESC includes built-in safety features and EZ-Set one-button programming, making setup quick and stress-free. Paired with the BL-2s 3300Kv sensorless brushless motor, this system offers smooth power delivery, strong torque, and long service life with minimal maintenance. Key Features ESC Perfect brushless upgrade for stock brushed Traxxas vehicles Water-resistant design Built-in two-stage low-voltage detection Thermal shutdown protection Patented Training Mode reduces power by 50% for new or younger drivers EZ-Set one-button setup and programming Three drive profiles: Sport, Race, and Training Mode Motor Sensorless brushless design 3300Kv output for balanced speed and torque Integrated cooling fan High-speed ball bearings Traxxas quick-connect motor plug Low maintenance, long service life Specifications ESC Scale: 1/10 Type: Brushless, sensorless Waterproof: Yes Input Voltage: 2S LiPo (7.4V max) BEC Output: 6V Output Connector: Traxxas Quick Connect Dimensions: 2.3 × 1.5 × 1.2 in (59 × 39 × 31mm) Weight: 3.06 oz (87g) Motor Input Voltage: 2S LiPo KV Rating: 3300Kv Diameter: 1.455 in (37mm) Length: 2.24 in (57mm) Weight: 7.09 oz (201g) Includes (1) Traxxas BL-2s Brushless ESC (1) Traxxas BL-2s Sensorless Brushless Motor A reliable, easy-to-install brushless combo that delivers strong performance, durability, and Traxxas simplicity—perfect for stepping up from brushed power ⚡🏁

Read more less

Hobbywing Low-Impedance Capacitor Modules are designed to improve power delivery, reduce ripple, stabilize ESC performance, and protect sensitive electronics during high-load acceleration and braking. These capacitor modules help reduce RF noise, maintain lower operating temperatures, and provide a smoother, more responsive feel on the track. Each module is tailored for specific Hobbywing ESC platforms, ranging from 1/10 Stock Spec systems to full 1/8 racing setups. This chart makes it easy to match the correct capacitor module to your ESC. Available Capacitor Modules MODULE-F – Part #30840007 Scale: Standard 1/10 Use With: Stock Spec, Justock, QuicRun 10BL60 SD Specification: 470uF / 20V × 1 capacitor MODULE-D – Part #86030030 Scale: Standard 1/10 Use With: XeRun XR10, QuicRun 10BL60 Sensored G2 Specification: 560uF / 20V × 2 capacitors MODULE-A – Part #86030000 Scale: Upgrade 1/10 Use With: XeRun XR10 Pro XeRun XR10 Stock Spec XeRun 120A V3.1 / V2.1 XStock QuicRun 10BL60 Sensored Specification: 470uF / 20V × 4 capacitors MODULE-E – Part #30840000 Scale: Standard 1/8 Use With: XeRun XR8 Plus G2S EzRun MAX8 G2S EzRun MAX10 G2 QuicRun WP 8BL150 G2 QuicRun WP 10BL120 G2 XeRun XR8 Pro G3 Specification: 470uF / 35V × 4 capacitors MODULE-B – Part #30840008 Scale: Standard 1/10 Use With: XeRun XR10 Stock Spec G2 Specification: 1000uF / 16V × 3 capacitors MODULE-C – Part #30840009 Scale: Standard 1/10 Use With: XeRun XD10, XeRun XR10 Pro Specification: 560uF / 20V × 3 capacitors MODULE-C Upgrade – Part #30840011 Scale: Upgrade 1/10 Use With: XeRun XD10, XeRun XR10 Pro Specification: 1000uF / 16V × 3 capacitors MODULE-D Upgrade – Part #30840010 Scale: Upgrade 1/10 Use With: XeRun XR10 Pro Specification: 1000uF / 16V × 2 capacitors Why Use a Hobbywing Capacitor Module? Reduces voltage ripple and electrical noise Improves throttle punch and braking consistency Keeps ESC temps lower under heavy load Helps protect ESC MOSFETs during rapid switching Provides cleaner overall power delivery

Read more less

  Power. Precision. Performance. Upgrade your ESC with the Hobbywing Module-X Non-Polarity Capacitor Module — engineered to deliver faster throttle response, smoother acceleration, and reduced electrical noise for ultimate racing consistency. Perfect for 1/10-scale Modified or Stock setups, this high-efficiency capacitor pack enhances performance without adding unnecessary weight or bulk. Race-Grade EfficiencyThe Module-X features low impedance and high ripple current endurance, allowing it to absorb voltage spikes and minimize interference caused by rapid ESC switching. The result: improved startup acceleration, lower heat generation, and longer ESC lifespan. Compact and lightweight, it mounts easily on your chassis for a clean, professional installation. ⚡ Features: Greatly improves startup acceleration and throttle response Reduces interference from ESC power switching Low impedance design for higher efficiency Minimal heat generation under load Small, lightweight, and easy to install Designed for 1/10-scale racing applications 📏 Specifications: Size: Standard (1/10-scale) 📦 Includes: (1) Hobbywing Module-X Modified/Stock Non-Polarity Capacitor Module  

Read more less

1RC Racing 1/18 Brushless Motor (10000Kv) w/10T Pinion – 1RC7011Looking for more speed? The 1RC 10000Kv Brushless Motor is the perfect upgrade for your 1/18 scale racer. With serious RPM and a pre-installed 10T pinion, this motor delivers the punch you need to dominate on the track. ✔️ 10000Kv for high-performance speed✔️ Pre-pressed 10T pinion for easy install✔️ Compatible with 1RC 1/18 scale platforms✔️ Perfect upgrade for racers chasing top-end power Includes:• (1) Brushless Motor (10000Kv)• (1) 10T Pinion (installed) 💥 Turn up the heat and leave the rest behind!    

Read more less

Unlock next-level speed and precision for your 1/28th-scale racer. The Hobbywing EZRun MINI28 Sensored Brushless Combo delivers an insane amount of performance in an ultra-compact package — combining a feature-rich ESC with a powerful, smooth 1626 sensored brushless motor. Designed specifically for competitive Mini-Z-style 1/28 racing, this combo gives you the control, adjustability, and efficiency needed to dominate tight layouts and technical tracks. About the EZRun MINI28 System Micro Size, Monster Performance The MINI28 ESC is tiny — just 22.7×14.2×11.8mm — but packed with advanced tuning options, including 26 adjustable parameters, a high-voltage adjustable BEC, and full compatibility with the Hobbywing OTA Module (sold separately) for smartphone programming. The included 1626 3500Kv sensored brushless motor delivers zero-cogging startup, crisp low-speed control, and big power up top. When paired with the MINI28 ESC, timing boost can drastically increase RPM for max straight-line speed. ESC Features Built specifically for 1/28 scale racing Ultra-compact and lightweight — fits almost any chassis Integrated aluminum heat sink for consistent temps Dual-mode app support (with optional OTA module) Sensored & sensorless brushless compatibility Adjustable high-voltage BEC (6V / 7.4V, 3.5A peak) ESC Specifications Continuous / Peak Current: 30A / 80A LiPo: 2S BEC: 6V/7.4V adjustable (3.5A peak) Size: 22.7×14.2×11.8mm Weight: 5g Motor Limit: 1626 size Motor Features (1626 – 3500Kv) Zero-cogging, ultra-smooth startup Excellent efficiency & cool operation Precision response and consistent torque Modular design for easy cleaning & maintenance Massive top-speed gains when using ESC timing Motor Specifications kV: 3500 Poles: 2 Input Voltage: 2S Diameter: 16mm Length: 26mm Shaft: 1.8mm x 8.5mm Weight: 18g Includes (1) EZRun MINI28 Sensored Brushless ESC (1) EZRun 1626 Sensored Brushless Motor (3500Kv) Wiring harnesses ESC Manual  

Read more less

Unleash extreme torque with the Titan 550 Reverse Rotation Motor from Traxxas — the ultimate upgrade for your TRX-4. This 21-turn powerhouse features a 30% longer armature than standard 540 motors, delivering monster torque and rugged trail performance. Built with an integrated fan for cooler running and longer motor life, this motor is ready to crawl, climb, and conquer. 🔥 21-turn / 14.4V Reverse Rotation🔥 550-size can for maximum torque🔥 30% longer armature = more power🔥 Integrated cooling fan for extended durability Compatible with: Traxxas TRX-4 Traxxas models requiring reverse rotation 550 motors Part #: 3975R Built to handle the toughest trails — torque, traction, and temperature under control. This is Titan power.  

Read more less

Furitek UNITY24 PRO 2-in-1 FOC Brushless System (3500kV)💥 Power + Precision for Your SCX24 💥 The Furitek UNITY24 PRO is a game-changing upgrade for 1/24 and 1/18 scale crawlers like the Axial® SCX24. This all-in-one brushless motor and ESC combo features FOC (Field-Oriented Control) technology for ultra-smooth control, powerful torque, and precision crawling. With built-in wireless programming, a waterproof CNC aluminum case, and smart BEC features, the UNITY24 PRO sets a new standard in micro crawler performance. ✅ Perfect fit for Axial® SCX24 and other micro crawlers✅ CNC-machined waterproof aluminum housing✅ Built-in wireless for easy app-based tuning (Android & iOS)✅ Smooth startup & throttle transitions with FOC tech✅ Adjustable BEC output (5.5V–8.4V)✅ Lifetime firmware updates 📦 Includes: (1) UNITY24 PRO 2-in-1 Motor/ESC System (1) CNC Aluminum Motor Mount (1) Furitek Repeater Wireless Module (1) 11T Pinion Gear 🔧 Specs: Motor: 3500kV Inrunner (12-pole) ESC Current: 30A continuous / 50A peak Voltage: 2S–3S LiPo BEC: 5.5V–8.4V switchable 🚀 Take your SCX24 to the next level with smoother climbs, better low-speed control, and simplified setup. This is the upgrade you've been waiting for.

Read more less

Unleash the full potential of your TRX-4M with the Traxxas 6250 Brushless FOC Power System Combo! This powerful upgrade delivers up to 50% more speed and performance than the stock brushed system, all while maintaining low-speed control and crawling precision with Field-Oriented Control (FOC) technology. The 3350kV brushless outrunner motor and waterproof ECM install easily with no mods—just plug and play. Fully compatible with Traxxas TQ and TQi transmitters and 2S TRX-4M iD® LiPo batteries. Pro Scale® lighting and three selectable drive modes (Sport, Trail, Crawl) are all retained. Features:• Powerful 3350kV brushless outrunner motor• Field-Oriented Control (FOC) for incredible torque and control• Plug-and-play installation using original ECM mounts• Retains Pro Scale® lighting and 3 drive modes• Waterproof ECM with integrated 3-channel receiver• Compatible with 2S TRX-4M iD® LiPo batteries• Includes 11-tooth brass pinion gear• Works with TQ and TQi transmitters Includes:• (1) TRX-4M Brushless FOC Power System ComboPart Number: 6250 Take your TRX-4M from fun to fierce—with the brushless upgrade that redefines control and performance.

Read more less

This Hobbywing 10BL60 G2 ESC (rebranded for LC Racing) delivers reliable sensored performance in a plug-and-play format—perfect for 1/10 scale on-road and off-road vehicles. Compact and powerful, it’s a great fit for RTR upgrades or custom builds that demand precision and punch. 🔧 Key Features: 60A Sensored ESC – Smooth throttle control with consistent power delivery Includes Cooling Fan – Actively keeps temperatures low under heavy load Plug & Play Ready – Pre-installed T plug (Deans) and 3.5mm bullet connectors for the motor Wide Compatibility – Suitable for 2S–3S LiPo and 5–9 cell NiMH setups Perfect Match – Ideal for 540-sized sensored brushless motors 📦 Includes: (1) Hobbywing 10BL60 G2 Sensored 60A ESC w/ T-Plug (1) Cooling fan pre-installed (3) 3.5mm bullet connectors (motor leads) 🚫 Sensor wire not included – sold separately

Read more less

Ultra-Compact. Ultra-Smooth. Ultra-Competitive. Meet the Furitek Komodo Unity 10 — one of the world’s first fully integrated 2-in-1 outrunner motor + FOC ESC systems, purpose-built for 1/10 competitive rock crawling. This combo delivers massive torque, razor-smooth throttle control, and the cleanest installation possible thanks to its compact integrated design. No more ESC mount. No more wiring clutter. No compromise on power. Overview The Komodo Unity 10 Competition system pairs Furitek’s proven outrunner torque with a highly advanced FOC (Field-Oriented Control) ESC built directly into the motor housing. At only 99g with XT60, this system dramatically reduces weight, frees up chassis space, and creates the cleanest pro-level crawler layout possible. FOC technology gives the Unity 10 incredibly smooth startups, zero-cog low-speed resolution, and ultra-consistent control on steep climbs, technical gates, and comp-level rock sections. With Bluetooth programming, wide BEC adjustability, and 2S–4S support, this system is engineered for serious performance with minimal setup effort. Features 2-in-1 integrated outrunner motor + ESC Just 99g total weight including XT60 connector FOC control for ultra-smooth startup and low-speed response 2S–4S LiPo compatibility Selectable 5.5V / 7.4V / 8.4V BEC (5A peak) Up to 280W output 50A continuous / 100A burst ESC capability Bluetooth tuning with the Furicar App (no programmer needed) Dramatically reduces wiring, clutter, and mounting space Proven competition-winning performance 2300kV torque edition designed for 1/10 crawlers Specifications ESC Input Voltage: 2–4S LiPo (7.4–14.8V) Continuous Current: 50A Burst Current: 100A BEC Voltage: 5.5 / 7.4 / 8.4V (Selectable) BEC Peak Current: 5A Programming: Furicar App (Bluetooth) Battery Connector: XT60 Motor Type: Brushless Outrunner kV Rating: 2300kV Voltage: 2–4S LiPo Watts: 280W Shaft Diameter: 3.175mm (1/8") Weight 3.49oz (99g) total Includes (1) Furitek Komodo Unity 10 Competition 2-in-1 Brushless Motor & ESC (2300kV) (1) User Manual  

Read more less

Unleash smooth, efficient power with the LC Racing 2840 4500kV Brushless Motor, designed for precision performance in LC Racing 1/14–1/16 scale vehicles. Compact, powerful, and reliable, this motor delivers exceptional acceleration, top speed, and thermal stability — perfect for racers looking to upgrade their mini-class performance. 🔥 Key Features: 4500kV brushless sensorless motor for efficient power delivery Durable 2840-size can for ideal weight and balance 3.175mm shaft compatible with standard mini-class pinions High-quality bearings for smooth, quiet operation Aluminum can design for improved heat dissipation Factory-wired bullet connectors for quick installation Ideal match for LC Racing 35A or 50A brushless ESC systems ✅ Compatibility: LC Racing EMB-WRC, EMB-TG, EMB-MT, EMB-SC, EMB-DT, EMB-1, and similar 1/14–1/16 LC Racing models Fits other small-scale vehicles using 2840-size motors with 3.175mm shaft 📦 Includes: (1) LC Racing 2840 4500kV Brushless Motor ⚠️ Tip:For best performance, pair with a 35A or 50A LC Racing ESC and gear appropriately for your track conditions to avoid overheating. 🏎️ Recommended For: 1/14–1/16 scale Buggy, Truggy, Rally, and Monster Truck applications Excellent upgrade for LC Racing RTR models seeking higher speed and torque balance

Read more less

Transform your Axial SCX30 with the Injora MBL32-NANO Brushless ESC and Green Viper 1621 Motor Combo. This compact brushless system delivers whisper-quiet operation, ultra-smooth throttle control, and powerful climbing performance designed specifically for micro crawling. With refined low-speed control and strong torque when needed, this combo gives your SCX30 the precision and power to conquer technical terrain. 🧗 Purpose-Built Brushless Power Designed specifically for the Axial SCX30, this combo combines a compact waterproof ESC with the high-torque Green Viper 1621 outrunner motor. The system provides extremely smooth throttle response and quiet operation, giving you greater control while navigating rocks, roots, and steep climbs. ⚡ Compact ESC with Advanced Control The MBL32-NANO ESC features a tiny footprint while delivering strong performance: 25A continuous / 45A burst current Adjustable 6V or 7.4V BEC Waterproof design for all-weather crawling PC programmability via USB This small but powerful ESC keeps your crawler responsive while maintaining clean wiring and minimal weight. 🏁 High-Torque Green Viper Motor The included 1621 Green Viper brushless outrunner motor features a 12-pole design that produces smooth low-speed rotation and strong torque for technical crawling situations. It provides: Smooth low RPM control Powerful climbing torque Quiet operation compared to brushed motors ⚡ Features Designed specifically for the Axial SCX30 micro crawler Whisper-quiet brushless operation Ultra-smooth and linear low-speed throttle response Strong power for climbs and acceleration Compact lightweight ESC design Waterproof ESC for all-weather performance High-torque 12-pole 3600kV outrunner motor Adjustable 6V / 7.4V BEC with 3A output Reinforced motor wiring with protective sleeve 📦 Includes (1) MBL32-NANO Brushless ESC (1) Green Viper 1621 Brushless Outrunner Motor 📊 ESC Specifications Application: 1/30 Rock Crawler Motor Type: Brushless Sensorless Input Voltage: 2–3S LiPo Continuous Current: 25A Burst Current: 45A BEC Voltage: 5.5V / 7.4V BEC Current: 3A Battery Connector: PH2 Programming: PC via USB 📊 Motor Specifications Motor Type: Brushless Sensorless kV Rating: 3600kV Poles: 12 Slots: 9 Input Voltage: 2S LiPo recommended Output Shaft: 1.7mm Dimensions: 15.5 × 21.5mm Weight: 14.9g ⚠️ Note: Due to the motor’s kV rating, this system should be used with 2S LiPo batteries only.A standalone receiver is required to complete installation. For SCX30 owners looking for quiet operation, smooth control, and serious crawling power, the Injora Green Viper brushless combo is a massive performance upgrade.

Read more less

Unleash serious performance in your micro crawler with the Furitek Nano Komodo 3800kV Brushless Motor (FTK-FUR-2740). Designed for platforms like the Axial SCX30 and Redcat Ascent-32, this compact outrunner motor delivers incredible torque, ultra-smooth low-RPM control, and powerful performance for technical crawling. Built with a high-torque 12-pole brushless design, the Nano Komodo provides buttery smooth throttle response and precise control when navigating rocks, climbs, and tight obstacles. Its compact lightweight design fits easily in tight chassis spaces, making it perfect for micro crawler builds. Installation is simple thanks to its plug-and-play design, requiring no modifications for compatible setups. Whether you're upgrading your SCX30 crawler or building a high-performance Ascent-32, the Nano Komodo delivers reliable power and exceptional crawling control. Features• 3800kV high-torque 12-pole brushless motor• Outrunner design for smooth power delivery• Buttery-smooth low RPM performance for technical crawling• Compact, lightweight construction for micro chassis• Plug-and-play installation with no modifications required• Ideal upgrade for Axial SCX30 and Redcat Ascent-32 Specifications• kV Rating: 3800kV• Motor Type: Brushless – Sensored• Voltage: 2–3S LiPo (7.4–11.1V)• Shaft Length: 0.236 in (6mm)• Shaft Diameter: 0.059 in (1.5mm)• Suggested Application: Optimized for Redcat Ascent-32 Includes• (1) Furitek Nano Komodo Brushless Outrunner Motor• 11T Pinion Gear Installed A powerful upgrade for builders looking to maximize performance from their SCX30 or Ascent-32 micro crawler.  

Read more less

The Trinity Slot Machine 2 Certified 21.5T Brushless Motor is built for competitive stock-class racing, delivering smooth power, excellent efficiency, and race-proven consistency. Each certified motor is hand-selected for the lowest resistance and highest performance, ensuring racers get a top-performing motor right out of the package. With a sensored brushless design and precision construction, the Slot Machine 2 provides the throttle control and reliability needed for tight racing and long mains. 🏁 Certified Race Performance The Certified version of the Slot Machine 2 motor is individually tested and selected from production batches to deliver the best electrical efficiency and power output. This process ensures consistent performance that serious racers can trust. The machined aluminum motor can reduces weight while improving heat dissipation, helping the motor stay cool and consistent during demanding race conditions. ⚙️ Tunable Endbell An adjustable endbell with laser-etched timing marks allows for quick and accurate timing adjustments, making it easy to fine-tune performance for different track conditions. ⚡ Features Certified hand-selected motor for maximum performance Selected for lowest resistance and peak output Sensored brushless design for smooth throttle response Lightweight machined aluminum motor can Improved cooling for consistent race performance Tunable endbell with laser-etched timing adjustments Ideal for competitive 21.5 stock-class racing 📦 Includes (1) Trinity Slot Machine 2 Certified Brushless Motor (21.5T) Built for racers who demand maximum efficiency, precision tuning, and consistent performance, the Slot Machine 2 Certified 21.5T motor is a strong contender for competitive stock racing.  

Read more less

Built for national-level competition, the Trinity Slot Machine 2 Certified 13.5T Brushless Motor delivers elite performance, precision throttle control, and race-proven consistency. Each certified motor is hand-selected for top performance and includes a dyno sheet verifying peak output, giving racers confidence in their equipment right out of the box. Designed for competitive stock-class racing, this sensored motor provides smooth power delivery and excellent efficiency on the track. 🏁 Competition-Level Performance The Slot Machine 2 motor features a precision sensored design that ensures smooth throttle response and predictable power delivery. This makes it ideal for tight, technical tracks where consistent control and acceleration are critical. A highly machined aluminum motor can reduces weight while dramatically improving heat dissipation, helping maintain performance during long mains and qualifying heats. ⚙️ Tunable & Race Ready The motor includes a tunable endbell with laser-etched timing marks, making timing adjustments quick, precise, and repeatable for racers dialing in their setup. Each certified version is hand selected and dyno tested, ensuring it meets Trinity’s top performance standards. ⚡ Features Certified hand-selected high-performance motor Includes dyno sheet verifying peak performance Sensored brushless design for smooth throttle response Lightweight heavily machined aluminum motor can Improved cooling and heat dissipation Adjustable timing with laser-etched endbell markings Designed for high-level competition racing ROAR approved for sanctioned events 📦 Includes (1) Trinity Slot Machine 2 Certified Brushless Motor (13.5T) Dyno performance readout Designed for racers who want proven dyno-tested performance and championship-level reliability, the Trinity Slot Machine 2 Certified motor is built to perform when it matters most.

Read more less

Dominate the track with the Hobbywing XeRun XR8 Pro G3 ESC & 3652SD Motor Combo. Designed for serious racing performance, this advanced electronics bundle delivers incredible power, precision tuning, and durability for 1/10 Short Course trucks and select 1/8 race applications. With cutting-edge smart technologies, customizable tuning options, and industry-leading reliability, the XR8 Pro G3 system gives racers the performance and control needed to stay ahead of the competition. ⚡ Advanced Smart Technology The XR8 Pro G3 introduces Smart Freewheeling technology, improving drive efficiency while reducing ESC temperatures by up to 59°F compared to previous generations. With Boost and Turbo Timing up to 48°, racers can unlock up to 50% more performance when paired with Hobbywing G3 motors. A unique dual brake system with disc brake simulation provides extremely smooth, linear braking—similar to real vehicle braking systems—for superior control during corner entry. 🎛 Fully Adjustable Performance The ESC includes 32 adjustable parameters, allowing racers to fine-tune everything from throttle response to timing. Three built-in racing profiles make setup fast and easy: Zero Timing / Blinky Mode Off-Road Racing Mode On-Road Racing Mode Programming can be done using: LCD Program Box Pro OTA Programmer HW LINK mobile app Firmware updates and data logging are also supported. 🛡 Durability & Protection Built for demanding racing environments, the XR8 Pro G3 includes multiple protection systems: Reverse polarity protection Capacitor thermal protection IP5X dust resistance Intelligent frameless cooling fan Ultra-soft 11AWG silicone wiring These features ensure reliable performance even under intense racing conditions. 🏁 Features Smart Freewheeling technology for improved efficiency Up to 48° Boost and Turbo timing adjustment Dual brake system with disc brake control 32 adjustable parameters for advanced tuning Three preconfigured racing profiles Reverse polarity protection Capacitor thermal overload protection IP5X dustproof rating Intelligent frameless cooling fan Firmware updates and data logging via HW LINK 📦 Includes (1) XR8 Pro G3 Sensored Brushless ESC (1) 3652SD Sensored Brushless Motor (4500kV) Product Manual 📊 ESC Specifications Input Voltage: 2-4S LiPo Continuous Current: 200A Peak Current: 1080A BEC Voltage: 6V – 7.4V BEC Current: 6A Continuous Dimensions: 54.8 × 36.8 × 38.8mm Weight: 102.8g 📊 Motor Specifications Motor Type: Sensored Brushless kV Rating: 4500kV Poles: 4 Input Voltage: 2S LiPo Diameter: 36.6mm Length: 53mm Weight: 189g Built for racers who demand maximum power, precise tuning, and race-proven durability, the XR8 Pro G3 combo is a serious upgrade for competitive SCT racing.  

Read more less

Take your SCX30 to the next level with the Furitek NanoModo 2026 — a purpose-built brushless conversion designed exclusively for the Axial SCX30 platform. Featuring wireless tuning, integrated servo control, and ultra-smooth low-speed precision, this all-in-one system delivers serious crawling performance in a clean, compact package. If you're ready to ditch brushed and go full control, this is the move. 🔥 Complete Brushless Upgrade The NanoModo 2026 includes the Nano Python ESC paired with the Nano Komodo 3800KV brushless motor, creating a seamless power system engineered specifically for the SCX30. Compact design, optimized wiring, and true plug-and-play installation make it a simple but powerful upgrade. 📲 Wireless Tuning with Furicar App Built-in Bluetooth allows you to adjust: Throttle curves Motor type Drag brake & ESC settings Firmware updates All directly from the Furicar App — no programming cards required. 🐢 Ultra-Smooth Low-Speed Crawling Advanced FOC (Field-Oriented Control) technology delivers buttery-smooth throttle response and precise low-RPM control. Perfect for technical lines, rock gardens, and controlled descents. ⚙️ Integrated Servo Controller Unlike many micro brushless systems, NanoModo features a built-in servo controller that works with the stock SCX30 servo. No extra adapters. No messy wiring. Clean and simple install. Features Complete brushless system built for Axial SCX30 Built-in wireless tuning via Furicar App Integrated servo controller (stock servo compatible) Advanced FOC technology for smooth throttle control Compact ESC and motor for tight chassis spaces High-torque 12-pole 3800KV sensored brushless motor Powerful built-in 5A BEC Fully plug-and-play installation Includes (1) Nano Python Brushless ESC (1) Nano Komodo Brushless Motor (1) Servo Adapter ESC Specifications Suggested Application: 1/30 Rock Crawler Motor Type: Brushed/Brushless (Switchable via App) Input Voltage: 2–3S LiPo (7.4–11.1V) Continuous Current: 20A Burst Current: 50A BEC Voltage: 5.5V / 7.4V BEC Continuous Current: 5A Battery Connector: PH2 Programming: Furicar App Motor Specifications Optimized for SCX30 KV Rating: 3800KV Type: Sensored Brushless Voltage: 2–3S LiPo Shaft Length: 6mm Shaft Diameter: 1.5mm Serious micro crawler performance in one clean, powerful package.Dial it in. Crawl harder. 🔥      

Read more less

The Traxxas 77mm Brushless Motor (2000Kv) is a high-performance replacement motor designed for the Traxxas Sledge. Built for serious power and efficiency, this motor delivers strong acceleration, consistent performance, and reliable operation under demanding driving conditions. Featuring a high-efficiency motor can with integrated heatsink design, this motor helps manage heat during extended high-power runs, making it ideal for heavy-duty bashing and high-speed operation. Pre-installed 6.5mm gold-plated connectors allow for quick and easy installation, getting your Sledge back up and running with minimal downtime. Features Genuine Traxxas replacement brushless motor 2000Kv rating for strong power and acceleration High-efficiency heatsink motor can for improved cooling Pre-installed 6.5mm gold-plated connectors Designed for high-performance applications Includes (1) Traxxas 77mm Brushless Motor (2000Kv) Compatibility Traxxas Sledge Built to handle the power and demands of modern brushless systems, this motor delivers the performance and durability expected from Traxxas electronics.  

Read more less

Smooth power. Precision control. Mini-Z performance perfected.The Atomic Zenon 4500KV Sensored Brushless Motor delivers high-efficiency power and ultra-smooth throttle response for Mini-Z racers looking to push their setup to the next level. Designed for precision handling and reliable torque delivery, this motor gives you the speed and feel needed to dominate tight technical tracks or long straightaways alike. Built to Atomic’s exacting standards, the Zenon motor features advanced sensored technology for consistent performance, fine throttle modulation, and improved low-end response — making it ideal for both stock and modified Mini-Z racing classes. ⚙️ Features 4500KV sensored brushless motor for Mini-Z platforms Delivers smooth, linear throttle response and strong torque High-efficiency rotor and stator design for maximum power with minimal heat Precision balanced for stable, vibration-free performance Compatible with Atomic and Kyosho Mini-Z MR-03, EVO, and similar brushless setups Compact and lightweight design for perfect chassis balance 📏 Specifications Spec Detail Motor Type Sensored Brushless KV Rating 4500KV Application Mini-Z 1/28-scale chassis Model Number MO-046 Manufacturer Atomic RC

Read more less

Overview:The Arrma 550 14T Brushed Motor is a powerful and reliable replacement motor designed for Arrma 1/10 scale brushed vehicles. Built with durability in mind, this motor delivers consistent torque and smooth acceleration, making it ideal for both beginners and backyard bashers. Its rugged construction ensures long-lasting performance, even under demanding conditions. Features: 550-size 14-turn brushed motor Provides reliable torque and smooth throttle response Durable design built for bashing and off-road fun Black can finish with Arrma logo for a clean look Genuine Arrma replacement part Compatibility: Direct replacement for select Arrma 1/10 4x4 brushed models, including: Granite 4x4 MEGA Senton 4x4 MEGA Big Rock 4x4 MEGA Typhon 4x4 MEGA May also be compatible with other vehicles using a 550-size brushed motor (check manual) Includes: (1) Arrma 550 14T Brushed Motor (Black) Part Number: ARA390307 ⚡ Pro Tip: Pair this motor with a fresh pinion gear and properly geared ESC setup to maximize runtime and keep temps under control.

Read more less

Replacement 23-turn brushed motor for LaTrax® vehicles. Restore your LaTrax® vehicle’s performance with the Traxxas 7575R 370-Size Brushed Motor. This 23-turn motor is designed as a direct replacement and includes pre-installed bullet connectors for quick and easy installation. 🔧 Features: 23-turn brushed design 370-size motor Pre-wired with bullet connectors Delivers smooth and reliable power Genuine Traxxas® replacement part 💥 Compatibility: LaTrax® Teton® LaTrax® Rally LaTrax® Desert Prerunner Perfect for keeping your LaTrax® vehicle running strong with factory-spec performance!

Read more less

Furitek UNITY PRO 2-in-1 Micro FOC Brushless System (3500kV) – FTK-FUR-2575🔋 Engineered for Peak Crawling Power – Made for TRX-4M 🔋 The Furitek UNITY PRO is a high-performance 2-in-1 brushless system designed specifically for 1/24 and 1/18 RC crawlers like the Traxxas® TRX-4M. Built with cutting-edge FOC (Field-Oriented Control) technology, it delivers whisper-smooth throttle response, powerful low-speed torque, and wireless programmability — all in one compact, waterproof unit. Optimized for low-reduction gearing, the UNITY PRO brings your mini crawler to life with instant torque, buttery startup, and maximum efficiency. Whether you're crawling technical lines or upgrading for superior control, this is the drop-in power system you've been waiting for. ✅ Features: All-in-one ESC + brushless motor design 3500kV Inrunner motor with 12-pole torque for smooth, low-speed control Waterproof CNC aluminum housing for rugged durability Integrated wireless programming via the Furicar App (Android/iOS) Built-in switchable HV BEC (5.5V–8.4V) Lifetime firmware updates included 📦 Includes: (1) UNITY PRO 2-in-1 Brushless System (1) Battery Adapter (1) 11T Pinion Gear ⚙️ Specifications:ESC Input Voltage: 2S–3S LiPoBEC: 5.5V–8.4V SwitchableESC Current: 30A Continuous / 50A PeakMotor Type: InrunnerMotor KV: 3500kVApplication: 1/24 – 1/18 Scale Micro Crawlers 💡 Note: For best results, use with crawlers equipped with low-reduction gearing.  

Read more less

Furitek MicroModo 2025 Brushless Combo🔋 Engineered for the TRX-4M – Tiny Size. Massive Power. 🔋 Transform your TRX-4M™ with the Furitek MicroModo Brushless Combo, the ultimate performance upgrade in a micro-sized package. Featuring the Micro Python ESC and Micro Komodo Motor, this compact power system delivers silky-smooth throttle response, superior torque, and app-based tuning — all designed specifically for 1/18–1/24 crawlers. 🚙 Perfect Fit. Maximum Performance. Built to drop directly into the Traxxas TRX-4M FOC Technology = smoother, more precise control Real-time telemetry via the Furicar App (iOS/Android) Compact, upward wire layout keeps your rig clean and functional Lightweight CNC aluminum components for strength and cooling ⚡ ESC Specs (Micro Python): Voltage: 2S–3S LiPo (7.4–11.1V) Continuous Current: 25A Burst Current: 50A BEC: 5.5–7.4V (5A peak) Dimensions: 22x14x9.8mm Weight: 0.27oz (7.6g) Programming: Furicar App Connectors: PH 2.0 battery / 3-pin motor ⚙️ Motor Specs (Micro Komodo): KV: 3450kV Power: 120W Voltage: 2S–3S LiPo Dimensions: 15.5x20.6mm Shaft: 1.5mm x 6mm Weight: 0.62oz (17.5g) Type: Brushless Inrunner 📦 Includes: (1) Micro Python Brushless ESC (1) Micro Komodo Brushless Motor (1) Wireless Programming Module (1) Receiver Plug (1) User Manual Mounting Accessories 🧗 Tackle the toughest lines with smoother throttle, more torque, and less noise. This is the upgrade your TRX-4M crawler deserves.

Read more less

⚡ Stock replacement motor for dependable performance. The Traxxas 7075 Titan 380 Brushed Motor (18-Turn) is a direct replacement for select Traxxas models, delivering smooth, consistent power in a compact design. Featuring an internal cooling fan for longer runtimes and improved durability, this motor is built to keep your RC running strong during high-action fun. ✅ Genuine Traxxas replacement part✅ 18-turn design for balanced speed & torque✅ Pre-installed bullet connectors for easy install✅ Integrated cooling fan for extended life 📦 Includes:• (1) Traxxas Titan 380 Brushed Motor (18T) Compatibility: Traxxas 1/16 E-Revo VXL & Brushed Traxxas 1/16 Summit Traxxas 1/16 Slash Traxxas 1/16 Rally

Read more less

The Trinity Slot Machine 2 Certified 17.5T Brushless Motor is built for serious racers looking for the best possible performance in stock-class competition. Each certified motor is hand-selected for the lowest resistance and highest performance, ensuring elite power output and consistency on the track. Designed with a sensored brushless system, the Slot Machine 2 delivers smooth throttle response and precise control—perfect for competitive racing environments where consistency matters. 🏁 Race-Tuned Performance The Certified version of the Slot Machine 2 is carefully tested and selected to ensure top-tier performance. These motors are chosen from production batches to deliver the best electrical efficiency and power potential, giving racers a competitive edge. The machined aluminum motor can improves cooling while reducing weight, helping maintain consistent performance through long mains and demanding race conditions. ⚙️ Tunable Endbell The adjustable endbell features laser-etched timing marks, allowing racers to fine-tune motor timing easily and accurately to match track conditions and driving style. ⚡ Features Certified hand-selected motor for maximum performance Selected for lowest resistance and highest output Sensored brushless design for smooth throttle response Lightweight machined aluminum motor can Improved cooling for consistent race performance Tunable endbell with laser-etched timing adjustments Built for competitive stock-class racing 📦 Includes (1) Trinity Slot Machine 2 Certified Brushless Motor (17.5T) Designed for racers who demand maximum consistency, efficiency, and race-proven performance, the Slot Machine 2 Certified 17.5T motor is a top choice for competitive stock racing.

Read more less

Built to handle extreme power and punishment, the Traxxas Velineon 1200XL is a massive brushless motor designed specifically for 8S performance in Traxxas’ largest platforms. Delivering enormous torque, smooth power delivery, and proven durability, this motor is the factory replacement for X-Maxx and XRT owners who demand reliable high-output performance. Key Features Genuine Traxxas Velineon 1200XL brushless motor 1275Kv for powerful, controlled 8S performance Sensorless brushless design for durability and simplicity Designed to handle extreme loads and high current Ideal replacement or refresh motor for factory setups What’s Included (1) Velineon 1200XL 1275Kv brushless sensorless motor Compatibility Traxxas X-Maxx Traxxas XRT Traxxas Funco A powerhouse motor built for big trucks, big voltage, and big performance—exactly what X-Maxx and XRT were made for ⚡🏁  

Read more less

The Hobbywing EZRun MINI28 Sensored Brushless ESC delivers next-level control and tuning in a tiny footprint — purpose-built for competitive 1/28-scale racing. Don’t let the size fool you… this ESC is absolutely loaded with features normally seen only on full-size race systems. At just 22.7 × 14.2 × 11.8mm, it fits cleanly into nearly any Mini-Z–style chassis, while the integrated aluminum heat sink keeps temps under control during hard runs. With 26 adjustable parameters, a high-voltage BEC, and OTA wireless programming (via optional module), the MINI28 gives racers every tuning edge possible. Key Features Designed specifically for 1/28-scale racing performance Ultra-compact and lightweight for tight chassis layouts Large integrated aluminum heat sink for temperature control High-voltage adjustable BEC (6V or 7.4V, 3.5A peak) Compatible with sensored and sensorless brushless motors Dual-mode App support (requires optional Hobbywing OTA module) Packed with 26 adjustable ESC tuning parameters Ideal for Mini-Z, GL Racing, PN, and other 1/28 platforms Specifications Continuous / Peak Current: 30A / 80A Motor Type: Sensored or Sensorless Brushless Motor Limit: 1626 size motors Battery: 2S LiPo BEC Output: 6V / 7.4V adjustable, 3.5A peak Dimensions: 22.7 × 14.2 × 11.8mm Weight: 5g (without wires) Programming: Via throttle cable or OTA module (sold separately) Includes (1) Hobbywing EZRun MINI28 Sensored Brushless ESC (1) ESC Manual Wiring harnesses

Read more less

Motor Overview:The Team Exalt XLR8 1/8 Sensored Brushless Long Can Truggy Motor is built from the ground up for racers who demand top-tier speed, torque, smoothness, and durability in 1/8 truggy competition. Engineered around a long 74mm can, this motor packs massive punch while maintaining ultra-refined control thanks to its advanced sensing system and premium internal design. A staggered-magnet rotor delivers both low-drag efficiency and huge torque, while the high-purity copper windings and heat-resistant magnet formula ensure consistent performance run after run. Add in a fully rebuildable architecture — including a replaceable sensor board — and you’ve got a high-end truggy motor designed to win championships and take abuse doing it. To keep temps under control even in brutal racing conditions, Exalt uses a 2mm-thick aluminum can paired with ventilation ports that allow airflow in while keeping debris out. The result is a high-power 1/8 truggy motor that stays cool, reliable, and consistent all day long. Features: Long-can 74mm design for extreme torque & power Staggered-magnet rotor for low drag and incredible punch Adjustable timing from 0–40° (CW/CCW) Sensored & sensorless compatible Rebuildable with replaceable sensor board High-purity copper windings High-strength, heat-resistant magnet formula Top-quality alloy steel 5mm output shaft Advanced hall-sensing separation design for smoother throttle response Large vent ports for airflow while blocking debris ROAR Approved! Specifications: Type: Sensored Brushless kV: 2350kV Voltage: 2–4S LiPo (7.4–14.8V) Poles: 4 Timing: 0–40° Adjustable (CW/CCW) Diameter: 41.8mm (1.645") Length: 74mm (2.91") Shaft Diameter: 5mm Shaft Length: 17.7mm (0.696") Weight: 386g (13.6oz) Application: 1/8 Truggy Competition Includes: (1) Team Exalt XLR8 1/8 Sensored Brushless Long Can Truggy Motor (2350kV) (1) Sensor Wire

Read more less