⚙️🏁 Lighten the Load. Increase the Speed. Take your Arrma Grom or Losi NASCAR to the next level with the Exotek Aluminum Lightweight Spur Gear. Precision-machined from hard-anodized 7075 aluminum, this high-performance upgrade dramatically reduces rotating mass to improve acceleration, increase motor efficiency, and enhance overall drivetrain response. At just 5 grams, the Exotek 59T spur gear weighs less than half of the stock steel gear, helping your vehicle rev quicker and run cooler while maintaining the durability racers demand. 🏁 About the Aluminum Lightweight Spur Gear ⚡ Improved Performance Through Reduced Weight The Exotek 59T spur gear weighs only 5 grams, compared to approximately 12 grams for the stock steel gear. Benefits include: Faster acceleration Increased motor RPM potential Improved throttle response Reduced drivetrain load Cooler operating temperatures 🔧 Built for Racing Manufactured from premium hard-anodized 7075 aluminum, this gear is engineered to withstand demanding racing conditions while providing smooth, efficient power transfer. 💪 Precision Fit & Durability The wear-resistant design ensures long-lasting performance while maintaining precise gear mesh and drivetrain efficiency. 🔧 Features ✔ Precision-machined from hard-anodized 7075 aluminum✔ Lightweight design weighs only 5 grams✔ Significantly lighter than the stock steel spur gear✔ Helps increase motor RPM and responsiveness✔ Reduces drivetrain stress and rotational mass✔ Promotes cooler operating temperatures✔ Wear-resistant construction for extended durability✔ Precision-engineered for smooth power transfer 📦 Includes (1) Exotek 59T Aluminum Lightweight Spur Gear 🚗 Compatibility Arrma Granite Grom Arrma Mojave Grom Arrma Typhon Grom Losi NASCAR 💡 Perfect For ✔ Competitive racers✔ NASCAR Grom tuning✔ Grom performance upgrades✔ Reducing drivetrain weight✔ Improving acceleration and responsiveness ⚠️ Notes 59-tooth spur gear configuration Designed as a performance upgrade for compatible Arrma Grom and Losi NASCAR platforms Verify gear mesh and compatibility prior to operation 💡 Pro Tip: Reducing rotating mass is one of the easiest ways to improve throttle response. Pair the Exotek lightweight spur gear with quality bearings and optimized gearing for maximum performance gains on the track. 🏁⚙️🔥  

Read more less

🏁🚛 Bring Truck Series Style to Your Losi NASCAR The Pro-Line 2026 Ram 1500 Pre-Trimmed Body delivers authentic NASCAR® Craftsman Truck Series styling for the Losi NASCAR platform. Officially licensed by NASCAR® and Ram, this lightweight polycarbonate body combines aggressive scale appearance with race-ready durability. Factory pre-trimmed for convenience, it's ready for your custom paint scheme right out of the package. Whether you're replacing a worn body or creating a one-of-a-kind race truck, this Ram 1500 body offers professional fit, outstanding realism, and proven Pro-Line quality. 🏁 About the 2026 Ram 1500 Body 🚛 Officially Licensed Styling Featuring officially licensed NASCAR® and Ram styling, this body captures the bold appearance of the 2026 Ram 1500 race truck with realistic body lines, scale details, custom rear spoiler, and included decal sheets for a professional finish. 🎨 Ready for Custom Paint Made from crystal-clear polycarbonate, the body arrives factory pre-trimmed to save time and features a paint-then-peel overspray film for clean, professional paint results. 💪 Built for Racing Lightweight yet durable polycarbonate construction is designed to withstand close racing while maintaining excellent performance on the track. 🔧 Features ✔ Officially licensed by NASCAR® and Ram✔ Factory pre-trimmed for quick installation✔ Durable lightweight polycarbonate construction✔ Crystal-clear body for custom paint schemes✔ Paint-then-peel overspray film included✔ Custom rear spoiler and scale details✔ Extensive decal sheets included✔ Designed for race-ready performance and durability 📦 Includes (1) Losi NASCAR® 2026 Ram 1500 Pre-Trimmed Clear Body (1) Molded Wing & Roll Bar Set (2) Decal Sheets (1) Masking Sheet 📊 Specifications Specification Details Scale 1/12 Application Losi NASCAR® Wheelbase 8.9in (226.06mm) Length 15.2in (386.08mm) Width 6.8in (172.72mm) Height 4.3in (109.22mm) 🚗 Compatibility Losi Asphalt Late Model Grom Losi NASCAR ⚠️ Notes Genuine Pro-Line Racing body. Body is clear and unpainted. Photos of painted bodies are shown for display purposes only. Factory pre-trimmed for faster installation. Polycarbonate paint is required for finishing. • • Verify compatibility before installation.    

Read more less

Compact power. Smart performance. Pure reliability.The Gens Ace 2S 35C G-Tech LiPo Battery Pack delivers dependable punch and long run times for 1/18-scale platforms like the Arrma Grom and Losi NASCAR. With G-Tech Smart Technology and a rugged iEC2 connector, this 2300mAh LiPo gives you clean, efficient power delivery and plug-and-play safety. Perfect for hobbyists who demand consistent voltage and reliable runtime in small-scale performance rigs. Small size. Big power. Built-in smarts.Engineered with precision-matched cells and low internal resistance, this pack provides smooth, stable output throughout each run. The soft case design fits tight battery trays, while the 35C discharge rate ensures crisp throttle response. Plus, the iEC2 plug prevents reverse connection and is fully compatible with EC2 and IC2 connectors for universal convenience. ⚡ Features 2300mAh capacity for longer driving sessions 35C continuous discharge rate delivers consistent power G-Tech Smart Technology for optimized charging and performance iEC2 connector compatible with EC2 and IC2 plugs Compact soft case ideal for 1/18-scale vehicles Factory-matched cells for reliable, balanced performance Designed for maximum safety and voltage stability ⚙️ Specifications Spec Value Nominal Voltage 7.4V (2S) Capacity 2300mAh Maximum Charge Rate 1C Discharge Rate (Continuous) 35C Cell Configuration 2S1P Watt Hours 17.02Wh Connector iEC2 Dimensions (L×W×H) 101×31×21mm (3.97×1.22×0.82in) Weight 115g (4.05oz) ROAR Approved No ⚠️ Important LiPo Safety Always use a LiPo-specific charger and balance charge Never leave batteries unattended while charging Do not overcharge, over-discharge, or short circuit Use a LiPo-safe bag/box for charging Allow pack to cool before recharging Store at 3.8V per cell for best cycle life ✅ Compatibility Arrma Granite Grom Arrma Mojave Grom Arrma Typhon Grom Losi NASCAR  

Read more less

⚙️ Built stronger. Built to last. Upgrade your ride with the Hot Racing Front Steel CVD Axle Set, designed for the Losi NASCAR and the Arrma Grom series (Granite Grom, Mojave Grom, Typhon Grom) equipped with the Arrma Grom Suspension B Set. Featuring CNC-machined steel stub shafts and aluminum clamp-style hex hubs, these axles deliver superior strength, durability, and smooth performance over stock CVD dog bones and plastic shafts. ✅ Direct replacement for factory CVD dog bones✅ Heavy-duty CNC steel + aluminum construction✅ Pre-assembled for quick, hassle-free install✅ Compatible with ARA330839 front arms & ARA330841 knuckles✅ Vehicle Compatibility: • Arrma Granite Grom • Arrma Mojave Grom • Arrma Typhon Grom • Losi NASCAR 📦 Includes:• (1) Front Steel CVD Axle Set (pre-assembled)• Aluminum wheel hex hubs 💡 Pro Tip: Apply a light layer of grease to CV joints for maximum performance and longevity.  

Read more less

🚀 Drop Weight. Gain Speed. Win Races. If you’re serious about squeezing every bit of performance out of your Losi NASCAR, this is one of those upgrades that just makes sense. The Exotek EXO2278 aluminum driveshaft cuts rotational weight dramatically—helping your car rev quicker, accelerate harder, and run smoother lap after lap. 💪 Performance You Can Feel Built from hard-anodized 7075 aluminum, this shaft weighs in at just 7 grams compared to the stock 22g steel unit. That’s a massive reduction in rotating mass—translating to: Faster spool-upHigher RPM potentialCooler motor tempsImproved throttle response🏁 Race-Ready Design The rounded center section trims even more weight while maintaining strength, and the precision machining ensures: Smooth, efficient power transferReduced drivetrain slopLess wear over timeConsistent performance every run🔧 Why You Want It This isn’t just a “nice upgrade”—it’s a noticeable performance gain on track. Less drag, less stress on your drivetrain, and more usable power where it counts. ✅ FeaturesHard-anodized 7075 aluminum constructionUltra-lightweight at 7 gramsRounded center for reduced rotational massSmoother, more efficient drivetrain operationIncreased durability and wear resistancePrecision fit for Losi NASCAR platform📦 Includes(1) Aluminum Lightweight Center Driveshaft🔧 FitsLosi NASCAR 💥 Limitless Tip: Pair this with proper gearing (like your 21T pinion on Super Speedway) and you’ll really feel the difference on the straightaways.

Read more less

Meet the EcoPower WP173 — a high-voltage, high-torque, high-speed aluminum micro servo built to dominate the 1/16 & 1/18 scale world. Waterproof, fully metal-geared, and engineered for precision, this servo is the ultimate upgrade for Traxxas®, Axial®, Losi®, Arrma® Grom™, TRX-4M™ (with mount), and more. Designed for brutal performance and long-term durability, the WP173 packs a coreless motor, an aluminum case, and torque numbers that punch way above its size. High-Performance Speed & Torque Whether you're racing, crawling, or bashing, the WP173 delivers lightning-fast response and incredible power: Speed: 0.09 sec/60° @ 6.0V 0.07 sec/60° @ 8.4V Torque: 123 oz-in @ 6.0V 173 oz-in @ 8.4V Smooth, crisp control — even under heavy load. Built for Abuse This servo is ready for the rough stuff: Full metal gear train Waterproof aluminum case Ball-bearing supported output Includes aluminum servo horn Long-lasting durability for harsh environments Wide Compatibility A true drop-in powerhouse for most micro platforms: Arrma® Grom Series:Gorgon • Granite • Mojave • Quake • Typhon Axial:1/18 Yeti Jr FMS:FCX18 • FCX24 • FCX24M Furitek:Cayman • Cayman Pro • FX118 • Gold Digger • Hiroyama • TerraX Losi:Mini Drag • Mini-B • Mini-T 2.0 • NASCAR Redcat:Ascent-18 Traxxas:TRX-4M™ & TRX-4MT™ (Requires EcoPower CNC Aluminum Servo Mount ECP-3072) Features: High torque + high speed performance Waterproof aluminum case Digital coreless motor Full metal gear construction Aluminum servo horn included 25-tooth output shaft (standard micro) Operates from 6V–8.4V Compact size for 1/16 & 1/18 models Built for racers, crawlers, and bashers Includes: (1) EcoPower WP173 Aluminum Digital Micro Servo (1) Aluminum Servo Horn (2) Composite Servo Horns Mounting Hardware Specifications: Application: 1/24, 1/16, 1/18 Input Voltage: 6V–8.4V Speed: 0.09 sec/60° @ 6.0V 0.07 sec/60° @ 8.4V Torque: 123 oz-in @ 6.0V 173 oz-in @ 8.4V Motor: Digital Coreless Output Shaft: 25T • 5mm Gear Material: Metal Dimensions: 23 × 12 × 31.75mm Weight: 23g Tech Notes: Do not exceed 8.4V. Waterproof, but prolonged submersion may weaken seals. TRX-4M platforms require the EcoPower ECP-3072 Aluminum Servo Mount.

Read more less

Smooth. Precise. Reliable.Keep your Arrma Grom-series vehicles running flawlessly with genuine Arrma 7x11x3mm Ball Bearings (ARA610053). These high-quality bearings reduce friction, improve drivetrain efficiency, and extend the life of your gears and shafts—essential for smooth, consistent performance on every run. Factory Fit. Race Ready.Each bearing is precision-sealed to resist dirt and moisture while maintaining low rolling resistance. Perfect as direct replacements for worn or gritty stock bearings, they’re built for long-lasting durability in both on-road and off-road conditions. 💪 Features: Genuine Arrma replacement part Precision-sealed bearings for smooth rotation and protection against debris Reduces drivetrain friction and wear Ideal for high-speed, high-load applications Direct fit for Grom-series vehicles 📦 Includes: (4) 7x11x3mm Ball Bearings ✅ Compatibility: Arrma Gorgon Grom Arrma Granite Grom Arrma Mojave Grom Arrma Quake Grom Arrma Typhon Grom Losi NASCAR    

Read more less

⚙️ Strength where it matters most. Upgrade your rear drivetrain with the Hot Racing Rear Steel CVD Axle Set, built for Losi NASCAR and Arrma Grom series vehicles (Granite Grom, Mojave Grom, Typhon Grom). Crafted from CNC-machined steel and paired with aluminum clamp-style hex hubs, these axles deliver superior strength, smooth operation, and better durability than factory dog bones and plastic shafts. ✅ Direct replacement for stock CVD dog bones✅ Heavy-duty CNC steel construction✅ Pre-assembled for quick installation✅ Aluminum wheel hex hubs for improved reliability✅ Compatible with ARA330840 rear arms & ARA330841 knuckles✅ Vehicle Compatibility: • Arrma Granite Grom • Arrma Mojave Grom • Arrma Typhon Grom • Losi NASCAR 📦 Includes:• (1) Rear Steel CVD Axle Set (pre-assembled)• Aluminum wheel hex hubs 💡 Pro Tip: Apply a light coat of grease to CV joints for smoother performance and extended life. 📦 Includes: • (1) Front Steel CVD Axle Set (pre-assembled)• Aluminum wheel hex hubs 💡 Pro Tip: Apply a light layer of grease to CV joints for maximum performance and longevity.  

Read more less

Dial in your suspension and steering geometry with the Hot Racing Aluminum Adjustable Camber & Steering Links Set, engineered specifically for the Losi NASCAR platform. Designed for precision, durability, and easy tuning, this upgrade gives you greater control over handling and steering response. Machined from durable aluminum, these adjustable links replace the stock components to provide increased strength and more accurate alignment control. Quick camber and toe-in adjustments allow you to fine-tune your setup for different track conditions, improving steering feel, stability, and overall performance. Built for OEM fitment, installation is straightforward and hassle-free. Features CNC-machined aluminum construction for increased strength Adjustable design for precise camber and toe-in tuning Improves steering response and handling consistency Durable upgrade over stock plastic links OEM fit for easy installation and proper geometry Includes (1) Aluminum Adjustable Camber & Steering Links Set A perfect upgrade for racers and drivers looking to improve durability, tuning flexibility, and on-track performance from their Losi® NASCAR.  

Read more less

Keep Your Power Locked In. The Arrma Motor Mount Set is a precision-engineered replacement kit designed to keep your motor securely mounted and perfectly aligned for optimal performance. Built from high-quality materials and manufactured to exact tolerances, this set ensures your Arrma Grom series vehicle runs smooth, strong, and reliable — every time you pull the trigger. Precision Fit & Reliable Performance This complete multi-piece mount set provides all the hardware you need for a solid motor installation. Ideal for rebuilds or maintenance, it maintains perfect gear mesh and durability, keeping your drivetrain efficient and your motor running cool under load. Features: High-quality factory replacement motor mount set Precision-engineered fit for secure, vibration-free motor alignment Helps maintain smooth drivetrain operation Includes multiple mount plates for versatile setup and compatibility Genuine Arrma factory hardware Includes: (1) Motor Mount A/B (1) Motor Mount C/D (1) Motor Mount E/F (1) Motor Mount G/H (1) Motor Mount I/J (1) Motor Mount K/L (1) Motor Mount M/N (1) Motor Mount O/P (2) 2.5×8 mm Cap Head Screws Compatibility: Arrma Granite Grom Arrma Mojave Grom Arrma Typhon Grom Losi NASCAR Arrma Tough — Secure Your Power.

Read more less

Dial in your handling and cornering performance with the Hot Racing Anti-Roll Sway Bar Set for Arrma Grom platforms. This precision upgrade reduces chassis roll and improves stability, giving your rig more control and speed through corners on any surface. Designed for performance tuning, this set allows you to fine-tune front and rear roll stiffness, helping balance your setup for different track conditions. The color-coded sway bars make it easy to identify thickness options at a glance, while the durable, rust-resistant construction ensures long-lasting performance. 🔧 Features:• Designed specifically for Arrma Grom platforms• Improves cornering stability and overall handling• Allows tuning of front and rear suspension stiffness• Color-coded sway bars for quick identification• Durable, rust-resistant construction• Precision fit for consistent performance 📦 Includes:• (1) Front & Rear Anti-Roll Sway Bar Set ⚙️ Specifications:• Material: Aluminum components with steel sway bars ⚠️ Tech Note:• Requires Hot Racing suspension arms (GRM55N01 & GRM56N01)• Not compatible with stock suspension arms ✅ Compatibility:• Arrma Granite Grom• Arrma Mojave Grom Take control of your chassis and carry more speed through the corners with the Hot Racing sway bar set, built for racers who want sharper handling and better overall performance.      

Read more less

🏁⚙️ Fine-Tune Handling & Cornering Performance! The Hot Racing Anti-Roll Sway Bar Set is a performance tuning upgrade designed for the Losi NASCAR and Arrma Typhon Grom platforms. Featuring multiple sway bar stiffness options, this kit allows racers to precisely adjust chassis balance, reduce body roll, and improve cornering consistency for a more planted and predictable driving experience. Whether you're dialing in a race setup or looking for more stability through the turns, this sway bar kit delivers valuable tuning flexibility. 🏁 About the Sway Bar Set ⚙️ Adjustable Suspension Tuning This kit includes three different sway bar diameters, allowing you to adjust front and rear roll stiffness to suit: Track conditions Driving style Tire selection Chassis setup 🏎️ Improved Cornering Stability Proper sway bar tuning helps: Reduce body roll Increase cornering consistency Improve chassis balance Enhance steering response 🔧 Complete Installation Package Includes front and rear mounts, sway bars, sway bar balls, and set screws for a complete tuning solution. 🔧 Features ✔ Adjustable roll stiffness tuning✔ Fine-tunes front and rear suspension response✔ Improves cornering stability✔ Reduces chassis body roll✔ Helps balance steering and rear traction✔ Three sway bar stiffness options included✔ Durable performance upgrade components✔ Designed for competitive tuning applications 📦 Includes (2) 2.0mm Sway Bars (Black) (2) 1.8mm Sway Bars (Chrome) (2) 1.6mm Sway Bars (Gold) (1) Front Sway Bar Mount (1) Rear Sway Bar Mount (4) Sway Bar Balls with Set Screws 🚗 Compatibility Losi NASCAR Arrma Typhon Grom 💡 Perfect For ✔ Oval racing setups✔ NASCAR Grom tuning✔ Typhon Grom handling upgrades✔ Reducing body roll✔ Fine-tuning suspension performance ⚠️ Notes Designed for Losi NASCAR and Arrma Typhon Grom platforms Additional Hot Racing mounts may be required for some Arrma Grom applications Verify compatibility before installation      

Read more less

Upgrade your front-end strength and steering precision with this Powerhobby aluminum steering knuckle. CNC-machined from high-quality aluminum, this is a direct replacement for the stock plastic part, offering improved durability and consistent steering performance. Features: CNC-machined aluminum construction Increased strength and durability over stock Precision fit for smooth, reliable steering Available in Red, Black, or Blue anodized finishes Fits: Arrma 1:18 Mojave Grom Losi 1:12 AWD NASCAR Replaces: ARA330841 Perfect for racers and bashers looking to reduce flex, improve reliability, and add a custom look.  

Read more less

Arrma Differential Cover Set (2-Pack) Protect & Maintain Your Differential The Arrma Differential Cover Set is a direct replacement part designed for Arrma Grom series vehicles and Losi NASCAR models. Built for durability and precision fit, these covers help protect your differential from dirt, debris, and damage, ensuring smooth and reliable performance on any terrain. Includes: ✅ (2) Differential Covers✅ Mounting Hardware Compatibility: ✔ Arrma Granite Grom✔ Arrma Mojave Grom✔ Arrma Typhon Grom✔ Losi NASCAR

Read more less

Upgrade front-end durability with this Powerhobby aluminum front gear box. CNC-machined from aluminum and anodized for a clean finish, it’s a direct replacement for the stock unit and helps reduce flex under load. Features: CNC-machined aluminum construction Increased strength and rigidity over stock plastic Precision fit for reliable drivetrain performance Available in Black, Red, or Blue anodized finishes Direct replacement design Fits: Arrma 1:18 Granite Grom Arrma 1:18 Typhon Grom Arrma 1:18 Mojave Grom Losi 1:12 AWD NASCAR Part Number: PHB6565    

Read more less

Tougher. Stronger. Built for the Groms. Keep your Grom running smooth and durable with the Arrma Mod 0.5 Metal Spur Gear (59T) — a precision-engineered upgrade built to handle more power, more torque, and more action. Perfect for racers and bashers alike, this gear delivers long-lasting performance and dependable strength you can count on. Performance & Durability Crafted from high-quality metal, this spur gear replaces the stock plastic version for enhanced wear resistance and smoother power transfer. Whether you’re bashing, racing, or just pushing limits, this upgrade keeps your drivetrain solid and reliable under heavy load. Features: Durable metal construction for extreme strength Smooth, reliable performance under high torque Ideal replacement or upgrade part Precision-fit Mod 0.5 design Includes: (1) 59T Mod 0.5 Metal Spur Gear Compatibility: Arrma Granite Grom Arrma Mojave Grom Arrma Typhon Grom Losi NASCAR Arrma Tough — Don’t Just Bash. Blast.    

Read more less

Upgrade strength and protection where it matters most with the Hot Racing Aluminum Rear Differential Gear Cover. Designed for the Arrma Grom platform, this CNC-machined upgrade delivers increased durability, improved heat dissipation, and reduced flex for more consistent drivetrain performance. Constructed from high-strength 7075 aluminum, this cover helps protect the rear differential from impacts and wear while keeping temperatures under control during hard runs. The rigid design minimizes flex, improving gear alignment and overall drivetrain efficiency—especially in rough terrain and high-load conditions. 🔧 Features:• Precision CNC-machined 7075 aluminum construction• Provides maximum protection for rear differential components• Helps reduce flex for improved drivetrain performance• Enhances heat dissipation under heavy use• Durable, corrosion-resistant black finish• Easy installation for quick upgrades 📦 Includes:• (1) Aluminum Rear Differential Gear Cover ⚙️ Specifications:• Material: 7075 Aluminum• Color: Black ✅ Compatibility:• Arrma Mojave Grom Built for durability and performance, the Hot Racing rear diff cover is a must-have upgrade to protect your drivetrain and keep your Grom running strong.    

Read more less

Secure your batteries with confidence using the Powerhobby 25×450mm Battery Straps. Designed for strength and reliability, these straps keep your packs firmly in place during hard acceleration, jumps, and rough landings. Features & Benefits: Durable hook-and-loop design for a secure hold 25mm width x 450mm length fits a wide range of battery sizes Helps prevent battery movement during high-impact driving Ideal for racing, bashing, and high-power setups Includes: Battery strap(s) (25×450mm) A simple but essential upgrade to keep your battery locked in and your electronics protected.  

Read more less

Upgrade durability and front suspension strength with these Powerhobby aluminum front upper arms. CNC-machined from aluminum and anodized for a clean finish, these arms are a direct replacement for the stock components and help reduce flex during hard driving. Features: CNC-machined aluminum construction Increased strength over stock plastic arms Precision fit for consistent suspension geometry Available in Red, Black, or Blue anodized finishes Fits: Arrma 1:18 Mojave Grom Losi 1:12 AWD NASCAR Part Number: PHB6846 Ideal for racers and bashers looking to improve durability while adding a custom look to their NASCAR or Grom platform.  

Read more less

Refresh your hardware and keep your rig running strong with the Arrma 3x24mm Button Head Screw Pin Set. Designed as a direct replacement for stock kit components, these screw pins deliver reliable fitment and durability for repeated wrench sessions and rough terrain. Ideal for repairs, maintenance, or building a parts bin, this set gives you everything you need to keep your suspension and linkages tight and secure. 🟢 Features Direct stock replacement hardware Durable steel construction Precision fit for secure assembly Great for routine maintenance or rebuilds 📦 Includes (10) 3x24mm Button Head Screw Pins 🔧 Compatibility Designed for the following models: Arrma Gorgon Grom Granite Grom Mojave Grom Quake Grom Typhon Grom Losi NASCAR 🏁 Keep Your Rig Running Tight A must-have hardware pack for anyone running the latest Grom-platform rigs—simple, durable, and ready to install.

Read more less

Officially Licensed NASCAR Style. Track-Proven Performance. Upgrade your Losi NASCAR GROM with the Ross Chastain #1 Busch Light 2025 Body, delivering the authentic look and attitude of Chastain’s real-world race car. This pre-painted, officially licensed body features high-quality graphics, durable construction, and pre-installed details for a race-ready fit right out of the box. Premium Ready-to-Run Detail Each body comes pre-painted with official Busch Light 2025 graphics, decal sheet pre-applied, and paint protection film installed to keep your GROM looking fresh after every run. Precision pre-drilled body mounts make installation effortless — just drop it on and go racing. Features: Officially licensed Ross Chastain #1 Busch Light 2025 body Pre-painted and pre-decaled for instant realism Paint protection film pre-installed to prevent scratches Durable molded body for long-lasting performance Pre-drilled mounting holes for direct fit on all NASCAR GROM vehicles Includes rear spoiler for added scale realism Includes: (1) Officially Licensed 2025 #1 Busch Light NASCAR GROM Body (1) Rear Spoiler Paint Protection Stickers (pre-installed) Compatibility: Losi NASCAR GROM Losi — Official NASCAR Performance in Mini Scale.

Read more less

Officially Licensed NASCAR Style for Your GROM. Bring championship looks to your Losi NASCAR GROM with the Christopher Bell #20 DeWalt 2025 Body Set. This officially licensed body features authentic graphics, precision detailing, and durable construction — built to capture the look of Bell’s powerful #20 DeWalt Toyota on the track. Perfect for racers and collectors, this body delivers premium realism and performance-ready design. Features: Officially licensed NASCAR Christopher Bell #20 DeWalt 2025 design High-quality molded body for durability and scale appearance Detailed printed graphics replicate the real DeWalt Toyota scheme Direct fit for Losi NASCAR GROM chassis Perfect upgrade for replacement, customization, or display Includes: (1) Christopher Bell #20 DeWalt 2025 NASCAR GROM Body Compatibility: Losi NASCAR GROM Losi — Where Real Racing Meets RC Power.

Read more less

The Arrma Granite Grom Front & Rear Hubs are genuine factory replacements designed to keep your 1/18-scale Grom platform vehicles running smooth and true. Built from durable composite material, these precision-molded hubs maintain proper alignment and ensure long-lasting performance through every bash session. ✅ Factory OEM Replacement – perfect fit and easy installation✅ Durable Composite Construction – strong, lightweight, and impact-resistant✅ Complete Set – includes front and rear hubs with mounting hardware Includes: (2) Front Hubs (2) Rear Hubs (4) Mounting Screws Compatibility: Arrma Gorgon Grom Arrma Granite Grom Arrma Quake Grom Arrma Typhon Grom Part #: ARA330807

Read more less

🏎️ Precision Steering Replacement for Grom & Losi NASCAR PlatformsThe Arrma NASCAR / Grom Steering Set is a genuine factory replacement designed to restore smooth and accurate steering performance on select Arrma Grom vehicles and the Losi NASCAR. Built for durability and precision, this set ensures dependable control and tight steering response whether you’re racing, bashing, or practicing on the track. ⚙️ About the Steering Set Engineered from high-quality composite and metal hardware, this complete steering assembly includes all necessary components to replace worn or damaged stock parts. The optimized geometry helps maintain consistent steering angles and alignment for reliable handling across all surfaces. 🌟 Features Durable composite construction for long-lasting performance Direct OEM replacement — easy installation, no modifications required Restores accurate steering geometry and alignment Includes all key components: arms, tie bar, and hardware Designed for multiple platforms including Arrma Grom and Losi NASCAR 📦 Includes (2) Steering Arms (1) Tie Bar (2) Screw Pins (1) Hinge Pin 🔩 Compatibility Arrma Granite Grom Arrma Mojave Grom Arrma Typhon Grom Losi NASCAR 🛠️ Restore precise, responsive steering control with the Arrma NASCAR / Grom Steering Set — built to factory specs for dependable performance on and off the track.    

Read more less

Keep your Losi NASCAR running smooth and race-ready with the LOS-1930 Center Driveshaft! Designed as a direct replacement for the Losi 1/12 NASCAR platform, this driveshaft helps deliver reliable power transfer and consistent performance lap after lap.Perfect for replacing worn or damaged drivetrain components and getting your car back on the track fast. 🏁Features: Genuine Losi replacement part Direct fit for the Losi 1/12 NASCAR platform Durable construction for dependable performance Helps maintain smooth drivetrain operation Includes: (1) Center Driveshaft  Compatibility: Losi NASCAR 1/12 Platform  

Read more less

The Arrma Mojave Grom Steering Knuckles & Rear Hubs Set (B) provides durable, factory-fit replacements to keep your suspension and steering performing like new. Designed for precision fit and smooth operation, these molded composite parts ensure reliable handling and impact resistance on your 1/18-scale Mojave Grom. ✅ Factory Replacement Components – direct OEM fit for the Mojave Grom platform✅ Includes Front & Rear Components – complete hub and knuckle replacement set✅ Durable Composite Construction – built to handle tough driving conditions Includes: (2) Steering Knuckles (2) Rear Hubs Compatibility: Arrma Mojave Grom Losi NASCAR Part #: ARA330841

Read more less

⚙️ Complete Replacement Hub Assembly for Grom PlatformsThe Arrma Front & Rear Wheel Hub Assembly Set provides everything you need to restore smooth, efficient drivetrain performance on your Granite Grom or Typhon Grom. Designed for precision fit and durability, this prepackaged set includes all the necessary components to rebuild or replace all four wheel hubs — front and rear. 🌟 Features Genuine Arrma replacement parts for perfect fit and performance Includes front and rear hub assemblies for complete vehicle coverage Durable composite construction built to withstand off-road abuse Ensures smooth rotation and consistent wheel alignment Ideal for maintenance, rebuilds, or repairs 📦 Includes (4) Complete Wheel Hub Assemblies (Front & Rear) All necessary bearings, hardware, and components ✅ Compatibility Arrma Granite Grom Arrma Typhon Grom 💪 Keep your Grom running at peak performance with this genuine Arrma wheel hub assembly set — precision-engineered for durability and reliability on every drive.  

Read more less

🏁 Authentic NASCAR Style Meets Pro-Line PerformanceBring true NASCAR® realism and performance to your Losi® racecar with the Pro-Line Goodyear® Eagle Pre-Mounted Retro Truck Tires. Featuring officially licensed Goodyear® yellow sidewall lettering, larger sidewalls, and replica steel wheels, these tires perfectly capture the look and handling of classic NASCAR Truck Series racers. ⚙️ About the Goodyear Eagle Tires Designed for both performance and scale detail, these tires transform your Losi NASCAR into a true showpiece on and off the track. The soft compound delivers consistent grip and control, while the taller sidewall improves scale realism and cornering dynamics—ideal for truck series builds and retro NASCAR setups. 🌟 Features Officially licensed by NASCAR® and Goodyear® Perfect for Truck Series or Retro NASCAR builds Larger sidewalls for authentic scale proportions Yellow Goodyear® Eagle sidewall lettering for true realism Mounted on replica steel wheels for period-correct looks Made in the USA by Pro-Line Racing Durable soft compound for balanced grip and longevity 📦 Includes (4) Goodyear™ Eagle Pre-Mounted Retro Truck Tires 📏 Specifications Spec Detail Scale 1/12 Overall Diameter 2.23 in (57 mm) Width 1.1 in (28 mm) Hex Size 8 mm 🔥 Upgrade your Losi NASCAR with the official Goodyear look — where scale style meets race-day performance!

Read more less

The ARRMA Input Gear Set is a genuine replacement part designed to keep your drivetrain running strong. Built for durability and smooth power transfer, this set ensures your vehicle stays reliable under racing and bashing conditions. ⚡ Features: Precision-machined for smooth gear mesh Durable steel construction for long life Direct replacement for factory parts Designed for consistent performance under load 📦 Includes: (1) Input Gear Set Compatibility: ARRMA GROM 1/12 Losi NASCAR RC Race Car Part #: ARA311182

Read more less

Keep your RC ride race-ready with this pack of Arrma 2.5x8mm Cap Head Screws. Designed as a direct replacement for stock hardware, these high-quality screws are a must-have for routine maintenance or repairs. 🔧 Features: ✅ Precision-made 2.5x8mm cap head screws✅ Ideal for replacing worn or stripped hardware✅ Durable steel construction for lasting performance 📦 Includes: (10) 2.5x8mm Cap Head Screws 🚗 Compatibility: • Arrma Granite Grom• Arrma Mojave Grom• Arrma Typhon Grom• Losi NASCAR

Read more less