Team Exalt Shorty LiPo Battery Storage Case (LCG)PART #: EXA4053 Keep your race-day power organized, protected, and ready to roll with the Team Exalt Shorty LiPo Battery Storage Case. Designed to hold up to five LCG shorty LiPo batteries, this lightweight, 3D-printed case is the perfect addition to any pit setup. Built from high-quality PLA, this compact and durable box keeps your batteries secure during storage and transport—without taking up unnecessary space. Whether you're heading to a local club race or a national event, this case helps you stay race-ready and clutter-free. Features: Holds five LCG shorty LiPo batteries 3D printed from durable PLA material Compact and lightweight—ideal for transport Precision-sized battery slots keep packs secure Easy to fit into your tool bag or pit box Includes: (1) Shorty LiPo Battery Storage Case (holds 5 batteries) Specifications: Material: PLA Outer Dimensions: 6.5 x 5 x 2 in (165.1 x 127 x 50.8 mm) Slot Dimensions: 3.8 x 1 x 1.6 in (96.5 x 25.4 x 40.6 mm) Note: This case is for storage and transport only. Not designed for charging or fire-safe containment.

Read more less

Team Associated 7.8x3.5x2.0mm Aluminum Hub Spacer Washers – Blue (10) – Part 31389Maximum Spacing. Race-Ready Adjustability. The Team Associated 7.8x3.5x2.0mm Blue Aluminum Hub Spacer Washers (31389) are ideal for making larger wheelbase and hub spacing adjustments on RC8B3 and RC8T3 series vehicles—or any platform that uses 3.5mm hinge pins. Durable and lightweight, these aluminum washers are a reliable tuning option for racers who want full control over rear-end geometry. ✅ Size: 7.8mm OD x 3.5mm ID x 2.0mm thick✅ Anodized blue 7075 aluminum – high strength, low weight✅ Designed for wheelbase and hub spacing adjustments✅ Compatible with 3.5mm hinge pin platforms✅ Pairs perfectly with 0.5mm and 1.0mm spacers (sold separately) 📦 Includes: (10) 7.8x3.5x2.0mm Blue Aluminum Hub Spacer Washers Part #: 31389 💡 Pro Tip: Use thicker spacers like this to extend wheelbase for more high-speed stability or track-specific tuning.

Read more less

Team Associated 7.8x1.0mm Aluminum Bulkhead Ball Stud Washers – Blue (10) – Part 31385Wider Support. Precision Shimming. Race-Ready Tuning. The Team Associated 7.8x1.0mm Blue Aluminum Ball Stud Washers (31385) are ideal for bulkhead and arm mount shimming in both on-road and off-road 1/10 scale vehicles. With a larger outer diameter, these washers provide more surface area, perfect for critical suspension points where strength and consistency matter. ✅ Pack of 10 precision washers✅ 7.8mm outer diameter / 1.0mm thickness✅ Anodized blue aluminum – lightweight and durable✅ Ideal for bulkhead, arm mount, and ball stud adjustments✅ Common in off-road and on-road setups alike✅ Perfect fit for 1/10 scale race platforms 📦 Includes: (10) 7.8x1.0mm Blue Aluminum Ball Stud Washers Part #: 31385 💡 Pro Tip: Use these in areas where added washer surface area can prevent flex or part deformation over time.

Read more less

Avid B7 Hardened Front Inner Hinge Pins (3x34mm) – 2pcs [AV10143-34] Product Overview: The Avid 3x34mm Hardened Front Inner Hinge Pins are a precision upgrade for the Team Associated B7. Crafted from high-strength hardened steel, these pins are a direct replacement for the front inner location — offering enhanced durability where it counts. Whether you're replacing worn pins or want to avoid buying the full hinge pin set (ASC92496), these are your go-to solution. Features: (2) 3x34mm hardened steel hinge pins for the B7 front inner location Built to withstand extreme racing conditions Direct replacement for pins in ASC92496 – no need to purchase the entire kit Includes: (2) 3x34mm Hardened Front Inner Hinge Pins Part Number: AV10143-34

Read more less

Team Exalt X-Rated 2S 135C HVX LiHV LCG Shorty Battery (7.6V/5100mAh) High Voltage. Race Ready. ROAR Approved. Give your setup the edge it deserves with the Team Exalt X-Rated HVX LiHV Battery. Built for competition, this 7.6V 2S LCG pack combines advanced chemistry, low resistance, and Silicone Graphene tech for powerful, consistent output and longer cycle life. The hardcase shorty design makes it perfect for tight 1/10 chassis builds where balance and performance are critical. ⚙️ Features: ✅ 135C Continuous Discharge Rate for maximum punch ⚡ LiHV (7.6V) design for high-voltage performance 🧠 Silicone Graphene Technology for lower IR and longer life 🔌 5mm High-Amp Bullet Connectors included 🏁 ROAR Approved since Dec. 2024 – race legal and track ready 🧊 LCG Hardcase to fit snug in shorty-compatible chassis 📐 Specifications: Voltage: 7.6V (LiHV 2S2P) Capacity: 5100mAh Continuous Discharge: 135C Dimensions: 96 x 46 x 22.5mm (LxWxH) Weight: 210g (7.40oz) Connector Type: 5mm bullets Balance Plug: 2mm bullets Watt Hours: 38.8Wh Charge Rate: 1C Max Configuration: LCG Hardcase Shorty ROAR Approved ✅ 💥 Optimized for elite 1/10 scale racing in both off-road and on-road platforms.Stay cool, stay powerful — Exalt X-Rated gets you to the finish line faster.  

Read more less

1up Racing LowPro Bullet Plugs + Grips – The Perfect Pairing for Clean Power Delivery 🔥 Take your wiring to the next level with the 1up Racing LowPro Bullet Plugs and Grips — the ultimate combo for pro-level installs and unmatched reliability. Designed for all LiPo batteries with 5mm inputs, this duo ensures a secure connection, minimal resistance, and a factory-finished look. ⚡ The LowPro Plugs feature a deep solder recess for clean joints with 11–16 gauge wire, while the Grips slide snugly into place, providing clear terminal ID and a stylish silver outer ring for superior grip and aesthetics. ✨ Key Features: 🔩 LowPro 5mm Bullet Plugs – Oversized 6-point contact for secure, low-resistance connection🧲 Deep Solder Recess – Quick, easy soldering with any 11–16 AWG wire🎨 Grips with Color ID – Instantly identify positive/negative terminals💪 Textured Outer Ring – Superior grip and eye-catching finish⚙️ Universal Fit – Works with all LiPo batteries using 5mm bullet inputs 📦 What’s in the Box? ✔️ (2) 1up Racing LowPro 5mm Bullet Plugs✔️ (2) Color-Grip Caps (Red + Black) 📌 Tip: Use a couple drops of CA glue to secure the grips after install! 💡 Wired to Win – Upgrade to 1up LowPro Bullet Plugs + Grips Today!  

Read more less

Optimize rear-end stability and durability with the RC10B6.2 Rear Hubs from Team Associated. Designed for high-performance racing, these molded composite hubs provide the perfect balance of strength, adjustability, and weight for 1/10 scale 2WD competition buggies. 🔥 Key Features: Molded composite construction for durability and weight savings Provides secure and precise fitment for rear axles and bearings Designed for high-performance rear suspension geometry Includes mounting locations for vertical ball stud height adjustments ✅ Compatibility: RC10B6.2 RC10B6.2D RC10B6.3 / B6.3D (backwards compatible) Also fits other B6-series vehicles with compatible rear hub geometry 📦 Includes: (1) Left Rear Hub (1) Right Rear Hub ⚠️ Note:Use with Team Associated’s tuning inserts and vertical ball stud hardware for full adjustability.

Read more less

Dial in your suspension with Team Associated’s Factory Team 13mm shock pistons. The #91933 set features 2x1.7mm holes with a 2.5mm thick profile, providing a great tuning option for refining pack and rebound on modern high-performance off-road tracks. 📦 Includes: (2) FT 13mm Shock Pistons – 2x1.7mm hole layout 2.5mm thick ⚙️ Key Features: CNC-machined for ultra-precise damping consistency Designed for 13mm shock bodies used on AE’s latest platforms Ideal for high-traction surfaces needing tighter shock control Compatible with RC10B6.4, RC10B74.2, and similar vehicles 📌 Tuning Tip: Use 2x1.7mm pistons to increase damping over 2x1.8mm, providing more pack and control in bumpy or high-speed corners.

Read more less

Upgrade your RC10B74's steering performance with the 9-degree Caster Blocks from Team Associated. Designed for precision and durability, these caster blocks deliver improved cornering stability and increased on-power steering response. 🛠️ Key Features: 9° caster angle for improved handling characteristics Factory Team quality with tight manufacturing tolerances Durable composite construction Direct fit for RC10B74 front suspension 📦 Includes: (1) Pair of 9° Caster Blocks (left & right) ✅ Compatibility: Team Associated RC10B74 and variants (check manual for specific fitment) Ideal for racers looking to fine-tune front-end geometry to suit different track conditions. A must-have tuning option for competitive setups.

Read more less

Fine-tune your RC10B74.2’s rear suspension geometry with this Rear Gearbox Adjustable Height Insert Set. Whether you're dialing in anti-squat or adjusting rear drive angles, these inserts give you the flexibility to get the most out of your setup. 📌 Key Features: Precision-molded plastic insert set Allows for rear gearbox height adjustment Fine-tune rear suspension geometry and anti-squat Designed specifically for RC10B74.2 and RC10B74.2D platforms 📦 Includes: Multiple insert pairs for adjustable configurations Designed to work with standard rear gearbox components ✅ Compatibility: RC10B74.2 RC10B74.2D Ideal for racers looking to squeeze out extra performance on varying track conditions — essential for serious 1/10 4WD competition setups.

Read more less

Overview:Secure your battery with confidence using the Team Associated RC10B7 Factory Team Battery Mount Set. Designed as a precision upgrade over the standard mounts, this Factory Team kit delivers improved strength, reduced flex, and a cleaner look for your B7 buggy. With its lightweight design and race-proven durability, it’s the perfect addition for serious racers who demand reliability and performance. Features: Factory Team precision-machined components for strength and fit Securely holds battery in place under high loads and hard landings Lightweight design reduces unnecessary weight Provides a cleaner, more professional chassis layout Genuine Team Associated Factory Team upgrade Compatibility: Team Associated RC10B7 1/10 2WD Buggy Includes: (1) Factory Team Battery Mount Set (with mounting hardware) Part Number: 92482 ⚡ Pro Tip: Pair this with the B7 Factory Team Carbon Side Rails (92483) for the ultimate lightweight and rigid chassis setup.  

Read more less

Overview:Protect your chassis and keep your buggy looking factory fresh with the Team Associated RC10B84 Factory Team Chassis Protective Sheet. Made from heavy-duty adhesive-backed material, this sheet prevents scratches, scrapes, and wear on the bottom of your chassis while maintaining a professional look. Pre-cut for a perfect fit, it installs easily and can be removed cleanly when it’s time for a replacement. Features: Genuine Factory Team accessory for the RC10B84 Heavy-duty material protects chassis from scratches and wear Pre-cut for an exact fit on the B84 chassis Strong adhesive backing stays put during racing Easy to apply and remove without residue Helps maintain resale value and professional appearance Compatibility: Team Associated RC10B84 1/10 4WD Buggy Includes: (1) Pre-cut Factory Team Chassis Protective Sheet Part Number: 92556  

Read more less

1up Racing Curved Glue Tips feature a steel tip which is easy to unclog for extended use. A single tip can last the life of a bottle of glue! Universal fit. For use with Medium to Thick viscosity CA glue. Package includes ten tips.

Read more less

Overview:Upgrade your motor mounting hardware with the JConcepts 3x6mm Finnisher Titanium Motor Screws. Precision-machined from lightweight titanium, these screws are both strong and stylish—giving you reduced weight without sacrificing durability. Available in Blue (2549-1) or Black (2549-2) anodized finishes, they’re the perfect blend of function and looks for your high-end RC build. Features: Machined from premium titanium for maximum strength and reduced weight Available in anodized Blue or Black finishes Low-profile Finnisher head design for a sleek look M3 x 6mm size – ideal for motor mounting applications Includes 2 screws per package Compatibility: Fits most 1/10 scale motors and motor plates that require 3x6mm screws Commonly used across popular RC racing platforms (check your motor and chassis manual for exact fitment) Part Numbers: Blue – 2549-1 Black – 2549-2  

Read more less

Fine-tune your XB2’s rear-end handling with the XRAY Short Rear Anti-Roll Bar series. Designed for precision adjustment, these sway bars control body roll and improve cornering stability, giving you the flexibility to adapt your buggy to any track condition. A softer bar provides more rear grip and smoother steering response, while a stiffer bar sharpens steering and reduces rear traction. Choose the perfect thickness to match your setup! Available Sizes: 1.0mm (323490) – Softest 1.1mm (323491) 1.2mm (323492) 1.3mm (323493) 1.4mm (323494) 1.6mm (323496) – Hardest Effects of Rear Roll Bar Changes: Softer Bar: Increases chassis roll Increases rear grip in corners Decreases on-power steering Car responds more slowly to direction changes Stiffer Bar: Decreases chassis roll Decreases rear grip in corners Increases on-power steering Car responds quicker to direction changes Features: High-quality spring steel construction Short design for precise handling response Essential tuning part for competitive setups Compatibility: XRAY XB2 (All Versions) Includes: (1) Short Rear Anti-Roll Bar (size selected)    

Read more less

🔧 Strong, Precise, Race-ReadyThe Team Associated RC10B84 Front Suspension Arms are precision-molded replacement components built to handle the rigors of competitive racing. Designed specifically for the B84 platform, these arms deliver the perfect balance of strength, flexibility, and lightweight performance to maintain consistent handling and durability under extreme conditions. ⚙️ Features: ✅ Direct fit replacement for RC10B84 ✅ Molded composite construction for durability and controlled flex ✅ Maintains proper suspension geometry for predictable handling ✅ Perfect for racers needing fresh arms or spares 📦 Includes: (1) Pair of Front Suspension Arms  

Read more less

🛡️ Protect it. Carry it. Flex it. Upgrade your Flysky NB4 or NB4 Pro with the Yeah Racing Aluminum Frame + Handle – a premium CNC-machined shield that’s all about protection and style. Lightweight yet rugged, this black anodized frame guards your radio against drops, dings, and daily wear, all while adding a bold, pro-level look. ✅ Fits NB4 & NB4 Pro transmitters✅ Precision CNC aluminum construction✅ Sleek black anodized finish✅ Built-in carry handle for convenience✅ Tough protection without the bulk 📦 Includes:• (1) Flysky NB4+ Aluminum Frame w/Handle (Black) Look good. Stay protected. Carry like a pro.

Read more less

🔥 Big Power. Small Footprint.The Team Exalt 110W Digital Soldering Iron packs serious heat in a travel-friendly design. With lightning-fast heat-up, digital precision, and a built-in safety shutoff, this is your go-to soldering tool whether you’re at the track or at the bench. ⚡ Features: 110W power output for rapid heat-up Digital display with °F/°C readout Auto safety shutoff & sleep timer Ceramic heater with platinum temp sensor Plug-and-play AC design—no base station needed Compact, portable, and ready to travel 💡 Built for RC racers, builders, and field techs who demand pro-level performance in a portable package.

Read more less

Team Associated RC10 4WD Ball Cups (20pcs) [6535] 🔧 Classic performance, restored! Refresh your vintage ride with this set of Team Associated RC10 4WD Ball Cups. Designed specifically for the RC10 Classic, RC10T, and RC10 Worlds editions, these molded plastic rod ends are built for strength, precision, and smooth suspension action. ✅ Direct replacement for factory originals✅ Secure fit on tie rods and turnbuckles✅ Restores tight, responsive steering and suspension✅ Made for RC10 Classic, RC10T, and RC10 Worlds Includes:(20) Ball Cups (Rod Ends) 📦 Part Number: 6535🏁 Brand: Team Associated

Read more less

Team Associated RC10B6.4 -1mm Scrub Caster & Steering Blocks (Carbon) [91985] 🛠️ Precision Meets Performance 💨 Upgrade your front end with this Carbon -1mm Scrub Caster & Steering Block Set for the RC10B6.4 and B6.4D. Built for racers who want rigidity, adjustability, and the ultimate in high-traction control. Carbon construction = serious stiffness. 🔥 ✅ Rigid carbon for a more responsive suspension✅ Includes multiple caster insert options for fine-tuning✅ -1mm scrub radius for quicker steering feel✅ Built for B6.4 / B6.4D platforms Includes:(2) Carbon Caster Blocks(4) Carbon Steering Blocks(2) +/- 0° Caster Inserts(2) +/- 2.5° Caster Inserts(2) +/- 5° Caster Inserts(2) Shims 📦 Part Number: 91985🚗 Brand: Team Associated

Read more less

Team Associated RC10B74 Differential Gasket & O-Rings – ASC92133🛠️ Keep It Sealed. Keep It Smooth. Maintain peak diff performance with this genuine Team Associated Differential Gasket & O-Ring Set for your RC10B74. Whether you're doing routine maintenance or a full rebuild, these factory-replacement parts help ensure a proper seal and smooth, consistent action. ✅ Perfect fit for RC10B74 front, center, or rear diffs✅ Helps prevent leaks and maintains consistent fluid pressure✅ Made from high-quality materials for long-lasting performance 📦 Includes:• (1) Differential Gasket• (2) 5x1.5mm O-Rings 🔢 Part Number: ASC92133🏁 Brand: Team Associated

Read more less

Team Associated RC8T4/RC8T4e CVA Bones (2) (131mm)PART: 81613 These 131mm CVA Bones are a genuine replacement part for the Team Associated RC8T4 and RC8T4e platforms. Precision-crafted for durability and performance, they’re designed to handle the demands of 1/8 scale racing. Perfect for restoring smooth power delivery and maintaining drivetrain reliability. Includes: (2) 131mm CVA Bones Compatibility: Team Associated RC8T4 Team Associated RC8T4e

Read more less

Team Associated RC10B7 Hinge Pin Set Part Number: ASC92496 Keep your suspension smooth and secure with the Team Associated RC10B7 Hinge Pin Set. This replacement set includes all necessary hinge pins for the RC10B7 platform, ensuring your vehicle maintains proper alignment and performance during high-stress racing conditions. ✅ Features: Direct replacement for the Team Associated RC10B7 Precision machined for smooth suspension operation Includes full set of hinge pins for the front and rear Durable construction for long-lasting performance 📦 Includes: (1) Complete hinge pin set for RC10B7 🚗 Compatibility: Team Associated RC10 B7 Team Associated RC10 B7D

Read more less

Team Associated RC10T6.2 Carbon Fiber +1mm Steering Arm (2) – 71144Upgrade your steering precision with these lightweight +1mm carbon fiber arms from Team Associated. Originally made for the RC10T6.2, but may also fit newer models (check compatibility). ✅ Carbon Fiber Construction – Lightweight and durable✅ +1mm Offset – Provides fine-tuned steering response✅ Direct Replacement – Easy bolt-on upgrade 📦 Includes:(2) +1mm Carbon Fiber Steering Arms Perfect for racers looking to sharpen handling and dial in front-end feel.

Read more less

Team Associated T6.1/SC6.1 Front Anti-Roll Bar Set [71128] 🌀 Dial in your handling with confidence! This Front Anti-Roll Bar Set is designed for the Team Associated T6.1 and SC6.1, helping reduce chassis roll and boost stability when the grip is high and the corners are tight. Whether you're fine-tuning for race day or upgrading for performance, this set has your front-end covered. ✅ Reduces chassis roll on high-traction tracks✅ Improves cornering response and overall stability✅ Works with Roll Bar Hardware Set ASC71134 (sold separately) Includes:• (1) 1.2mm White Front Anti-Roll Bar• (1) 1.3mm Gray Front Anti-Roll Bar• (1) 1.4mm Blue Front Anti-Roll Bar 📦 Part Number: 71128🏁 Brand: Team Associated

Read more less

Team Associated 13mm Shock Spring Cup Set [91966] 🌀 Fine-Tune Your Ride Height in Seconds! Dial in your suspension setup with this 13mm Shock Spring Cup Set from Team Associated. Whether you're going low or keeping it high, this kit includes 0mm, 5mm, and 9mm cups—giving you full control over ride height and spring preload. 🛠️ ✅ Fits 13mm shocks✅ Includes 0mm, 5mm, and 9mm cups✅ Perfect for on-the-fly tuning✅ Durable and precision-molded Includes:(4) 0mm Spring Cups(4) 5mm Spring Cups(4) 9mm Spring Cups 📦 Part Number: 91966🚗 Brand: Team Associated

Read more less

Team Associated 13mm Rear Shock Spring. These optional springs are intended for the Team Associated B6.4D and the B6.4. Package includes two springs. Effects of Shock Spring Changes  Shock Spring  Characteristic  Softer Increased Chassis Roll Increased Traction Better in Bumpy Conditions More Likely to Bottom Out  Stiffer Decreased Chassis Roll Decreased Traction Increased Responsiveness COMPATIBILITY: Team Associated RC10 B74.2Team Associated RC10 B74.2DTeam Associated RC10B6.4Team Associated RC10B6.4D

Read more less

Team Associated 13mm Front Shock Spring. These optional springs are intended for the Team Associated B6.4D and the B6.4. Package includes two springs. Effects of Shock Spring Changes  Shock Spring  Characteristic  Softer Increased Chassis Roll Increased Traction Better in Bumpy Conditions More Likely to Bottom Out  Stiffer Decreased Chassis Roll Decreased Traction Increased Responsiveness COMPATIBILITY: Team Associated RC10 B74.2Team Associated RC10 B74.2DTeam Associated RC10B6.4Team Associated RC10B6.4D

Read more less

Team Associated RC10B74.2 Differential Pinion Gear Shims (5x6.5x1mm) – ASC92319 Precision Spacing for Consistent Gear Mesh. These Factory Team 5x6.5x1mm differential pinion gear shims are designed specifically for the RC10B74.2 and B74.2D. Ideal for maintaining correct gear mesh and minimizing drivetrain wear, these shims ensure smooth differential operation and long-term performance. 🔧 Features: ✅ OEM-quality replacement shims ✅ Sized 5x6.5x1mm for perfect pinion gear fit ✅ Helps fine-tune gear mesh and reduce wear ✅ Compatible with RC10B74.2 & B74.2D 📦 Includes: (Set of) Differential Pinion Gear Shims (5x6.5x1mm) 🛠️ Keep your drivetrain dialed in with these must-have tuning components!

Read more less

Team Associated RC10B74.2 Factory Team Carbon Rear Gearbox – Part #92327🛠️ Stronger. Lighter. Factory-Ready. The Factory Team Carbon Rear Gearbox is a premium upgrade for your RC10B74.2 or B74.2D. Engineered for lightweight strength and race-ready reliability, this precision-molded carbon-reinforced gearbox improves stiffness and reduces weight in critical drivetrain areas—perfect for serious racers looking for an edge. ✅ Direct fit for RC10B74.2 & RC10B74.2D✅ Carbon-reinforced for reduced flex and improved durability✅ Includes sway bar mount for added tuning options✅ Genuine Factory Team performance part 📦 Includes: (1) Carbon Rear Gearbox Base (1) Gearbox Cover (1) Sway Bar Bracket

Read more less

Team Associated RC10B7 Top Plate & Ballstud Mount Set. This replacement set is intended for the Team Associated RC10B7 1/10 buggy. Package includes one top plate and one ballstud mount. COMPATIBILITY: Team Associated RC10 B7 OriginalTeam Associated RC10 B7D

Read more less

1up Racing Red CV Joint Oil – Smoother, Faster, Cleaner ⚙️ Looking for max performance and zero compromise? 1up Red CV Joint Oil is the top choice for racers demanding ultra-smooth suspension and long-lasting protection. Trusted worldwide, this ultra-slick formula keeps your drivetrain buttery-smooth while repelling dirt and debris like a champ. 💡 Whether you're rebuilding for race day or tuning your rig for fun, Red is the upgrade your CV joints and universals deserve. ✨ Key Features: 🧴 Leakproof 8ml Bottle – Take it anywhere, worry-free🧲 Stainless Needle Tip – Pinpoint accuracy with every drop🔐 Childproof Cap – Safety-first, pit-friendly packaging🔴 Engineered for CV Joints & Universals – Extreme performance and longevity🧼 Slick, Clean Finish – Repels dirt and dust for clean, efficient operation🌍 Proven Worldwide – Trusted by top racers across the globe 💡 Join the movement – experience the power of Red today!  

Read more less

Pro-Motion Viper 2.2" Slim 2WD Front Pre-Mount LP Carpet Buggy Tires (2) — C3 Green (Medium Compound, White Wheels)Part #: 3070-C3-W Race-Ready Precision. Built-In Speed. The Pro-Motion Viper Slim Pre-Mounts are made for the front of 2WD 1/10 buggies, combining speed, control, and convenience. Featuring a low-profile carcass and advanced directional tread pattern, these C3 Green medium compound tires offer balanced front-end grip and stability—ideal for clean, high-traction carpet or turf tracks. Pre-mounted on white wheels so you can hit the track faster and focus on winning. ✅ Pre-mounted on durable white wheels✅ C3 Green medium compound for consistent front traction✅ Slim profile for 2WD front buggy setups✅ Low-profile sidewall for sharper steering and reduced flex✅ Directional tapered pin tread for tuning potential 📦 Includes:(2) Viper 2.2" Slim 2WD Front Pre-Mount Tires (White Wheels) 💡 Pro Tip: Pair with matching C3 rears for optimal balance and predictable cornering.

Read more less

Pro-Motion Viper 2.2" Rear LP Carpet Pre-Mount Buggy Tires (2) — Yellow (C3 Green/Medium)Part #: 3090-C3-Y Low-Profile Speed. Carpet-Tuned Control. Engineered for precision, the Pro-Motion Viper 2.2" LP Rear Buggy Tire is built to dominate on high-traction carpet and turf tracks. With a low-profile carcass for reduced sidewall flex and quicker response, the Viper delivers unmatched stability and cornering grip. Its tapered pin tread and directional radius pattern provide predictable traction, while mini wedges and a radial rib add versatility across various conditions. ✅ Pre-mounted on yellow wheels—ready to race✅ Low-profile carcass enhances response and stability✅ Tapered mini pin design for maximum grip✅ Directional tread for fine-tuned traction control✅ Designed for 1/10 scale carpet and turf racing✅ C3 compound for medium traction balance 📦 Includes:(2) Viper LP Rear Pre-Mounted Tires(2) Foam Inserts 💡 Pro Tip: Combine with Pro-Motion Slim Front LPs for a fully dialed-in carpet setup.

Read more less

Pro-Motion 2.2" 2WD Front Slim Carpet Buggy Wheels (4)Available in Yellow (3080-Y) or White (3070-W) Precision on the Carpet. Built for Grip. Dial in your buggy for high-traction carpet tracks with Pro-Motion’s 2.2" Slim Front Wheels. These lightweight wheels are engineered with a reinforced inner rib design to reduce flex without adding unnecessary weight. The tough plastic construction holds up under pressure, while integrated vent holes keep performance sharp through long mains. ✅ Perfect fit for 2WD front carpet setups✅ Slim profile design tailored for high-grip surfaces✅ Ultra-lightweight ribbed structure for strength without bulk✅ Built-in vent holes reduce tire ballooning✅ Available in bright Fluorescent Yellow or Clean White✅ Includes 12mm hex mounting 📦 Includes:(4) 2.2" Slim Front Carpet Buggy Wheels (choose Yellow or White) 💡 Pro Tip: Pair with low-profile carpet tires for the ultimate precision and responsiveness on tight indoor layouts.

Read more less

Team Exalt Charger StandPart #: EXA6473 The Team Exalt Charger Stand is the perfect solution to keep your pit area clean, organized, and professional. Designed to fit most popular RC chargers, this sleek, 3D-printed stand lifts your charger off the table, providing better airflow and freeing up valuable workspace for batteries, tools, and accessories. Whether you're at the track or in the workshop, this stand ensures your charger stays securely in place while making cable management easier and more efficient. Features: Custom-designed for a stable, elevated platform Compatible with most common RC battery chargers Lightweight, durable 3D-printed construction Keeps cables and connectors organized Helps promote better charger ventilation and performance Sleek black finish with clean edges for a professional look Includes: (1) Team Exalt Charger Stand (charger not included) Get organized and race-ready with Team Exalt.  

Read more less