🏁📡 Race Ready. Ultra Compact. Universal Compatibility. The MYLAPS RC4 Hybrid Direct Powered Transponder is the industry standard for accurate lap timing in RC racing. Smaller, lighter, and more versatile than previous generations, this transponder delivers reliable performance across a wide range of racing platforms. 🏁 About This Transponder 📡 Hybrid Compatibility Fully compatible with RC2, RC3, and RC4 timing systems, making it a future-proof choice for racers at any track. ⚡ Direct Powered Convenience Connects directly to your receiver, supporting 2.8V–16V input, including 1–4S LiPo systems. 🪶 Compact & Lightweight At half the size and weight of previous versions, it’s ideal for competitive racing where weight and space matter. 🔧 Key Features ✔ Hybrid compatibility (RC2 / RC3 / RC4 systems)✔ Direct powered via receiver✔ Ultra-compact and lightweight design✔ Wide voltage range (2.8V–16V)✔ PTFE fuel-resistant wiring✔ Quick-change holder system✔ Easily transferable between vehicles 📦 Includes (1) RC4 Hybrid Personal Transponder (1) Transponder Holder 📊 Specifications Dimensions: 16 x 19 x 6mm (excluding holder) Weight: 4.7g (with holder) Operating Voltage: 2.8V – 16.0V Power Consumption: 19mA @ 6.0V Connector: 3-Pole Receiver Plug Wire Type: PTFE (fuel resistant) 🚗 Compatibility Compatible with MYLAPS RC2, RC3, and RC4 timing systems Works with electric and nitro RC vehicles 💡 Perfect For ✔ Competitive racers✔ Club and national-level events✔ Multi-vehicle setups✔ Tracks using MYLAPS timing systems

Read more less

🔌⚡ Clean Wiring. Reliable Signal. Low-Profile Design. The ProTek RC Flat Sensor Wire is designed to provide consistent, interference-free communication between your sensored brushless motor and ESC. With a slim, flat design, it keeps your build clean while improving wire routing in tight chassis layouts. 🏁 About This Sensor Wire 📏 Clean, Low-Profile Routing The flat cable design allows easy routing under components and through tight spaces, reducing clutter and improving overall build appearance. ⚡ Reliable Signal Transfer Engineered for consistent, interference-resistant communication, ensuring smooth motor performance in sensored brushless setups. 🎯 Perfect Fit Length At 150mm, this cable is ideal for a wide range of 1/10 scale applications and clean electronics layouts. 🔧 Key Features ✔ Low-profile flat cable design✔ Reliable signal transfer for sensored systems✔ Slim construction for easy routing✔ Helps reduce wiring clutter✔ Interference-resistant performance✔ Optimized for brushless motor/ESC communication 📦 Includes (1) Flat Sensor Wire (150mm) 📊 Specifications Length: 150mm 🧰 Recommended Use Sensored brushless motor to ESC connection Clean electronics installations Organized wiring setups  

Read more less

🏁 Clean Look. Lightweight Upgrade. Precision Fit. Upgrade your sway bar setup with this R1WURKS aluminum hardware set, designed to replace the stock components with a lightweight, blacked-out look and precise fit. 🏁 About the Sway Bar Hardware Set ⚙️ Lightweight & Durable Machined from high-strength 7075-T6 aluminum, these components offer a solid balance of durability and reduced weight. 🎯 Precision Fit CNC machining ensures accurate fitment and smooth operation, helping maintain consistent sway bar performance. 🖤 Clean, Blacked-Out Style Finished in matte black anodizing with subtle R1 laser-etched branding for a sleek, professional appearance. 🔧 Key Features ✔ 7075-T6 aluminum construction✔ Precision CNC-machined components✔ Matte black anodized finish✔ Laser-etched R1 branding✔ Lightweight sway bar balls✔ Direct replacement upgrade 📦 Includes (2) Sway Bar Bearing Collars (2) Sway Bar Balls (4) M3x3 Set Screws 🚗 Compatibility Team Associated RC10 SC7 Team Associated RC10 T7 Team Associated RC10 B84 Team Associated RC10 B84D Team Associated RC10 B7 Team Associated RC10 B7D 🏁 Simple upgrade. Clean look. Dialed performance.  

Read more less

🏁 Lightweight. Strong. Race-Ready Precision. The R1WURKS 22X Series Titanium Turnbuckle Set is a premium upgrade designed for racers looking to reduce weight while increasing strength and consistency. Precision-machined in-house from Grade 5 titanium, these turnbuckles deliver high-end performance without unnecessary bulk. 🏁 About the Titanium Turnbuckles ⚙️ Precision Engineering Manufactured using advanced Swiss machining, these turnbuckles are built to extremely tight tolerances for a precise fit and consistent adjustment. 🪶 Lightweight Strength Made from Grade 5 titanium (Ti-6Al-4V), these are approximately 45% lighter than steel, helping lower overall weight and center of gravity without sacrificing durability. 💪 Advanced Thread Design Cold-formed (rolled) threads improve strength and material integrity compared to traditional cut threads, resulting in a more durable and reliable component. 🔧 Key Features ✔ Grade 5 titanium construction✔ Approximately 45% lighter than steel✔ Cold-formed threads for increased strength✔ Precision Swiss-machined in-house✔ Streamlined profile reduces stress نقاط✔ Integrated left-hand thread identification✔ 4mm adjustment area 📦 Includes (4) M3.5 x 50mm Turnbuckles (2) M3.5 x 55mm Turnbuckles 🚗 Compatibility Team Losi Racing 22X Series 🛠️ Notes Use a 4mm turnbuckle wrench for adjustments Apply grease to threads before installing ball cups for easier assembly 🏁 Less weight. More precision. Built for racers.  

Read more less

Ring Gear Overview:This is a replacement differential ring gear designed for the Team Losi Racing 22X-4 platform. It ensures proper drivetrain function and smooth power transfer through the differential. 🔧 Key Features ✔ Replacement differential ring gear✔ Maintains smooth drivetrain operation✔ Direct fit design 📦 Includes (1) Differential Ring Gear 🚗 Compatibility Team Losi Racing 22X-4 Ideal for replacing worn or damaged components, this ring gear helps keep your drivetrain running consistently and reliably.    

Read more less

Keep your drivetrain running smoothly with the Team Associated 54T Idler Gear for the 3-gear gearbox. This replacement idler gear is designed for RC10B7, RC10T7, and RC10SC7 platforms, delivering reliable power transfer and consistent performance. Precision molded for proper mesh and durability, this gear is ideal for replacing worn or damaged components to maintain drivetrain efficiency and smooth operation. 🔧 Features:• Replacement 54T idler gear for 3-gear gearbox• Designed for RC10B7, RC10T7, and RC10SC7 platforms• Precision molded for smooth gear mesh• Durable construction for long-lasting performance• Ideal maintenance or replacement part 📦 Includes:• (1) 3-Gear Gearbox Idler Gear ⚙️ Specifications:• Tooth Count: 54T• Gearbox Type: 3-Gear• Position: Idler Gear Keep your drivetrain dialed in with the Team Associated 54T idler gear, built for smooth performance and dependable durability.    

Read more less

Keep your bearings spinning smoother and lasting longer with R1WURKS DOPE Double Ceramic Long Life Bearing Lube. Specially developed for high-performance RC applications, this advanced lubricant helps reduce friction, improve efficiency, and extend the life of your bearings under demanding racing conditions. Formulated with double ceramic technology, this premium bearing oil penetrates deeply into bearings to deliver smooth rotation and consistent performance lap after lap. ⚙️ Advanced Bearing Protection The ceramic-enhanced formula reduces friction and heat buildup inside the bearing, allowing for smoother operation and improved drivetrain efficiency. It also helps protect bearings from wear, contamination, and moisture. 🏁 Built for Racing Performance Designed for racers who demand maximum efficiency, DOPE bearing lube helps maintain free-spinning bearings and consistent performance, which can translate to better acceleration, improved drivetrain efficiency, and longer component life. ⚡ Features Premium double ceramic bearing lubricant Reduces friction and heat inside bearings Helps extend bearing lifespan Improves drivetrain efficiency and smoothness Penetrates bearings for long-lasting lubrication Ideal for RC cars, trucks, and other high-speed applications 📦 Includes (1) 10ml Bottle of R1WURKS DOPE Double Ceramic Bearing Lube A great maintenance product for keeping your RC bearings running smooth, efficient, and protected during intense racing conditions.  

Read more less

Restore proper chassis rigidity and suspension linkage positioning with the Team Associated RC10B7.1 Top Plate & Ballstud Mounts (92586). Designed specifically for the B7.1 buggy platform, this replacement set helps maintain consistent handling performance and precise suspension alignment. The top plate plays an important role in maintaining chassis structure, while the ballstud mounts ensure accurate suspension linkage positioning for smooth and predictable steering response. Replacing worn or damaged components helps keep your Team Associated B7.1 performing consistently during both practice and competitive racing. Ideal for routine maintenance, rebuilds, or race-day preparation, this set helps keep your buggy dialed in and ready for the track. Features• Genuine Team Associated replacement components• Helps maintain chassis rigidity and structural alignment• Ensures accurate suspension linkage positioning• Supports consistent steering and handling performance• Designed for the RC10B7.1 / B7.1 buggy platform Includes• (1) RC10B7.1 Top Plate & Ballstud Mounts Set   Features• -1° rear toe geometry adjustment for suspension tuning• Factory Team aluminum construction for strength and precision• Improves rear suspension alignment and durability• Designed for 3-gear gearbox configuration• Ideal tuning upgrade for the Team Associated B7.1 platform Includes• (1) RC10B7.1 Factory Team 3-Gear Gearbox Aluminum Arm Mount “C” Block (-1°)          

Read more less

The Team Associated RC10B7.1 Factory Team Carbon Front Suspension Arms (92575) are a premium upgrade designed to enhance front-end responsiveness and steering precision. Featuring carbon construction, these arms reduce weight while increasing stiffness, delivering a sharper and more connected steering feel for competitive racing. Engineered for seamless integration with the RC10B7.1 platform, these Factory Team components maintain consistent suspension geometry and provide the precision and durability demanded by high-level racers. Features• Increased steering precision for improved front-end response• Lightweight carbon construction reduces front-end weight• Maintains consistent suspension geometry• Factory Team performance upgrade• Direct replacement design for easy installation Includes• (1) Left RC10B7.1 Factory Team Carbon Front Suspension Arm• (1) Right RC10B7.1 Factory Team Carbon Front Suspension Arm    

Read more less

If you’re racing your Team Associated B7 on high-bite surfaces like carpet or turf, this is one of those upgrades that instantly makes sense once you try it. The Avid -2° HD C Arm Mount widens the C pivot block to properly reduce rear toe — without narrowing your track width. The result? A freer car in the corners and more predictable landings off sideways jumps and corner tabletops. 🔧 What It Does Normally, to reduce rear toe on carpet, you narrow the pills in the D mount — which decreases track width and increases side bite. That can make the car edgy. Avid solves this by: Widening the C mount Starting you at 1° rear toe with centered pills Maintaining full track width Removing 2° of rear toe properly The difference in handling is noticeable immediately. 🏁 On-Track Benefits Frees the car up in high-grip conditions More rotation in tight corners Better stability when landing sideways Maintains proper rear geometry Keeps track width intact Perfect for carpet and turf racing where fine-tuned rear grip balance is critical. 💪 HD Construction This isn’t just geometry — it’s strength too. HD version adds material to the sides Pill cutouts removed for improved impact resistance Machined from 7075-T6 aluminum Anodized black with silver chamfer highlights Laser-etched Avid logo and -2° marking for easy identification 🔧 Fitment Team Associated B7 If you're chasing that perfect carpet/turf balance and want the rear end freed up without sacrificing stability, this mount is a must-have tuning piece.

Read more less

Upgrade your rear suspension with genuine Factory Team Carbon Rear Suspension Arms for the RC10T7 and RC10SC7 platforms. Designed for racers who demand precision and consistency, these arms increase rigidity and reduce flex under high-load conditions, giving you a more predictable and controlled feel on the track. Built using AE’s legendary carbon composite material, they offer the perfect balance of strength, durability, and lightweight performance — exactly what competitive racing requires. Features Factory Team performance upgrade Constructed from AE carbon composite material Increased rigidity over stock arms Reduces flex under hard cornering and acceleration Enhances durability and structural integrity Improves overall handling consistency Includes (2) Rear Factory Team Carbon Suspension Arms Designed specifically for: RC10T7 RC10SC7 A race-proven upgrade that delivers stronger, more consistent rear-end performance when it matters most. 🏁  

Read more less

More punch. More durability. More tuning freedom. The Exotek TLR 22X Locked Spur Mount Set is a high-performance upgrade designed to reduce rotating mass while increasing drivetrain strength and responsiveness. Precision-machined from lightweight aluminum and paired with a durable titanium center bolt, this setup delivers quicker acceleration and improved throttle response — exactly what stock class racers demand. This mount allows you to easily switch between a locked spur configuration or a slipper setup, giving you instant adaptability to match track conditions. Whether you’re looking for maximum forward drive on high-bite carpet or tuning consistency on clay, this system provides the flexibility to dial in your drivetrain. Fully compatible with Exotek and Kimbrough spur gears, it mounts directly to the stock 22X top shaft for a seamless installation. Features: Lightweight aluminum construction Durable titanium center bolt Reduces rotating mass for improved acceleration Allows quick conversion between locked spur and slipper Compatible with Exotek and Kimbrough spur gears Direct mount to stock 22X top shaft Designed for competitive 22X racing Includes: (1) TLR 22X Locked Spur Mount Set w/Titanium Bolt Built for racers who want sharper throttle response, increased drivetrain durability, and the flexibility to adapt to any surface.  

Read more less

Dial in sharper handling and increased chassis rigidity with the Team Losi Racing 22X Stiffezel Side Guards. Designed for competitive racers, these upgraded side guards offer increased stiffness over stock components, improving precision and stability on high-bite surfaces. Constructed from TLR’s Stiffezel material, these guards reduce chassis flex, delivering more direct suspension response and improved consistency through high-speed corners. The added rigidity helps the car stay planted and predictable, especially on high-traction tracks where flex control becomes critical. Whether you’re fine-tuning your setup for carpet, clay, or prepared dirt, these side guards offer a proven tuning option to maximize performance. Features: Stiffer and stronger than stock side guards Reduces chassis flex for improved precision Enhances suspension response and consistency Improves control in high-speed turns Optimized for high-bite and traction-heavy surfaces Direct fit for 22X platforms Includes: (2) 22X Stiffezel Side Guards Built for racers who want sharper steering response, increased stability, and a more locked-in feel on demanding race surfaces.

Read more less

The Team Associated 92516 RC10B7 Rear Suspension Arms (81mm) are an optional geometry upgrade compared to the standard 78mm rear arms. While 78mm arms are the direct replacement, these 81mm arms are designed for racers looking to experiment with rear suspension geometry, stability, and tuning options. ⚠️ IMPORTANT – NOT A DIRECT BOLT-ONThese 81mm arms require additional parts to install correctly. This is not a simple swap, and is recommended for racers comfortable with setup changes. What’s Different vs 78mm Arms Longer 81mm arm length Changes rear geometry and axle position Results in a 1mm total rear width difference Requires different rear hub offset and drivetrain parts Required Parts for 81mm Conversion To run these arms properly, the following parts are required (per Team Associated supplement): RC10B7 Rear Hub Set, -4mm Offset (P/N 92518) HD CVA Bones, 71mm (P/N 92549) B74 CVA Axle, 66mm (P/N 92207) 1mm Wider Hex 1 Higher Axle Height Setting Features Genuine Team Associated option part Durable molded composite construction Designed for RC10B7 platform Allows advanced rear suspension tuning Compatibility RC10B7 with required supporting components Who This Is For Racers tuning rear grip and stability Builders experimenting with alternative geometry Not recommended as a basic replacement arm 🏁 Pro Tip: Make sure all required parts are installed together to maintain correct drivetrain alignment and handling.

Read more less

Tune rear traction and balance with the Team Losi Racing 13mm Rear Springs (Green, 2.22lb). This spring rate provides increased rear compliance for improved grip and stability, especially on low-to-medium-grip surfaces or during corner exit transitions. Manufactured to Team Losi Racing standards, these springs offer consistent performance and repeatable setup changes, making them ideal for racers refining their suspension for specific track conditions. Features: 13mm rear shock springs Green color code for easy identification 2.22lb spring rate for enhanced rear grip Precision wound for consistent performance Ideal for fine suspension tuning Includes: (2) Rear Shock Springs Compatibility: Team Losi Racing 22X platforms Part Number: TLR-1190

Read more less

Team Losi Racing CVA Driveshaft Bones X69mm (2) 22X TLR232138 Improve drivetrain strength and suspension articulation with the Team Losi Racing CVA Driveshaft Bones, engineered for the 22X platform. These 69mm constant-velocity axle driveshaft bones provide smooth power transfer through suspension travel while helping reduce binding and drivetrain stress. Precision-manufactured to Team Losi Racing standards, these CVA bones are ideal for upgrading or replacing worn components to maintain responsive handling and consistent performance under race conditions. Features: Constant-velocity axle driveshaft bones 69mm length for proper fit on 22X Helps improve drivetrain articulation and reduce binding Precision-manufactured for smooth power transfer Durable construction for race use Compatibility: Team Losi Racing 22X Includes: (2) CVA Driveshaft Bones Part Number: TLR232138  

Read more less

Restore smooth drivetrain operation with the Team Losi Racing VHA V2 Axles Rebuild Set for the 22X platform. This replacement rebuild kit is designed specifically for vehicles equipped with VHA V2 axles, making it easy to refresh worn components and maintain consistent performance on the track. Ideal for routine maintenance or race-day prep, this set helps ensure proper axle function, reduced play, and reliable power delivery. Features: Genuine Team Losi Racing replacement parts Designed for VHA V2 axle assemblies Restores smooth operation and durability Helps maintain consistent drivetrain performance Easy rebuild solution for routine maintenance Includes: (2) Barrel Coupler Bushings (2) Axle Pins Compatibility: Team Losi Racing 22X Team Losi Racing 22X-T

Read more less

Dial in rear grip and balance with the Team Losi Racing Rear Springs Red 1.87lb. Designed for precise suspension tuning, these softer 13mm springs are ideal for low-to-medium grip conditions where increased rear traction and compliance are critical. Color-coded for quick identification and manufactured to Team Losi Racing’s exact specifications, these springs deliver consistent rates and repeatable performance for serious racers. Features: Red color-coded springs for easy identification 1.87lb spring rate for increased rear grip and compliance 13mm diameter for 22X shock compatibility Consistent spring tension for repeatable setup changes Precision manufactured for race-level performance Includes: (2) Rear Shock Springs Compatibility: Team Losi Racing 22X platform

Read more less

Increase strength and tuning precision with the Team Losi Racing HD Turnbuckle Kit, designed specifically for the 22X platform. These heavy-duty turnbuckles provide improved durability over stock components while allowing fast, accurate suspension and steering adjustments at the track. Perfect for racers looking to reduce flex, improve consistency, and maintain precise alignment through hard racing conditions. Features: Heavy-duty construction for increased strength Improves durability and resistance to bending Allows quick camber and toe adjustments Designed for consistent race performance Compatibility: Team Losi Racing 22X platforms Includes: HD Turnbuckle Set Part Number: TLR-1114

Read more less

Upgrade durability and precision with the Team Losi Racing Aluminum Front Axles, engineered specifically for the 22X platform. Machined from lightweight aluminum, these front axles deliver improved strength and consistency while maintaining smooth drivetrain operation under race conditions. Ideal as a performance upgrade or direct replacement, these axles help ensure reliable steering response and long-term durability on high-grip or demanding tracks. Features: Precision-machined aluminum construction Lightweight and durable design Improves front-end strength and reliability Smooth, consistent drivetrain operation Compatibility: Team Losi Racing 22X platforms Includes: (2) Aluminum Front Axles Part Number: TLR-1156

Read more less

Fine-tune front suspension feel and steering response with the Team Losi Racing 13mm Front Springs. Rated at 3.56lb, these red springs provide a balanced option for drivers looking to increase front-end support while maintaining smooth, predictable handling. Designed specifically for TLR 13mm shocks, these precision-wound springs deliver consistent rate accuracy and repeatable performance, making them ideal for dialing in grip and steering on a variety of track conditions. Features: Precision spring rate for consistent performance 3.56lb rate offers balanced front-end support Designed for 13mm TLR shock systems Ideal for tuning steering response and front grip Factory color-coded for quick identification Includes: (2) Front Springs Spring Rate: 3.56lbDiameter: 13mmColor: Red

Read more less

Fine-tune your steering geometry with the Team Losi Racing Narrow “A” Steering Arm, designed specifically for the 22X platform. This narrow steering arm provides precise steering response and is ideal for drivers looking to adjust Ackermann and steering feel to match track conditions. Precision molded for strength and accuracy, this part is perfect for replacements, rebuilds, or setup tuning on race day. Features: Narrow “A” steering arm configuration Precision-molded for accurate geometry Helps fine-tune steering response and feel Durable construction for race use Compatibility: Team Losi Racing 22X platforms Includes: (1) Narrow Steering Arm A Part Number: TLR-1089

Read more less

Fine-tune front-end geometry with the Team Losi Racing Caster Block Insert Set, designed specifically for the TLR 22X platform. These inserts allow precise adjustment of caster angle, giving racers the ability to tailor steering response, corner entry, and overall front-end feel to changing track conditions. Perfect for setup changes or replacement of worn components, this insert set helps unlock consistent, repeatable steering performance on race day. Features: Allows precise caster angle adjustment Improves steering response and front-end feel Ideal for tuning across different track conditions Precision-fit components for reliable performance Compatibility: Team Losi Racing 22X Includes: Caster Block Insert Set Part Number: TLR-1096  

Read more less

Keep your drivetrain running smoothly with the Team Losi Racing Idler Gear Set, designed specifically for the TLR 22X platform. These gears provide reliable power transfer and are ideal for routine maintenance or replacing worn drivetrain components. Manufactured to Team Losi Racing standards, this idler gear set ensures consistent performance and durability under race conditions. Features: Precision-molded idler gears Maintains smooth and efficient drivetrain operation Durable construction for race use Direct replacement parts Compatibility: Team Losi Racing 22X Includes: (2) Idler Gears Part Number: TLR-1120  

Read more less

Upgrade or replace your steering hardware with the XRAY Composite Extended Steering Servo Arm Set. Designed for precision and durability, these servo arms provide a secure fit and consistent steering response for XRAY competition platforms. Manufactured from high-quality composite material, each arm is precision machined for accurate spline engagement and easy installation right out of the package. Features & Benefits: High-quality composite construction for strength and durability Extended design for precise steering geometry Precision machined for accurate spline fit Easy installation with consistent steering performance Compatibility: XRAY XB4 XRAY XT2 1/10 Dirt & Carpet Competition Buggy and Stadium Truck platforms Includes: (1) 23T servo arm (1) 25T servo arm A clean, reliable replacement set to keep your XRAY steering system tight and responsive on any surface.    

Read more less

Small in size but big on performance, the SkyRC B6 Neo delivers serious charging power in an ultra-portable design. With up to 200W DC output and USB-C PD support, this smart charger is built for hobbyists who want flexibility, speed, and safety—whether at the track or on the bench. Designed to handle a wide range of battery chemistries, the B6 Neo also doubles as a compact power supply, making it a versatile tool for modern RC setups. Features & Benefits 200W DC charging power with up to 10A output USB-C PD dual input delivers up to 80W for added flexibility Ultra-compact design—approximately ¼ the size of previous models XT60 DC input and modern Type-C PD input Built-in balance port enables faster, more efficient discharging Up to 24W discharge when using balance port + main port Comprehensive safety protections for reliable, secure charging Clean, modern design with a durable plastic housing Performance Highlights High-power charging in a pocket-sized footprint Efficient battery management across multiple chemistries Ideal for racers, bashers, and bench setups needing portable power Includes (1) SkyRC B6 Neo 200W Smart Charger A compact, high-output charger designed for today’s RC demands—powerful, portable, and built with safety in mind.  

Read more less

Fine-tune your suspension and lower the center of gravity with the Team Losi Racing 22X Carbon Fiber Front Shock Tower (-2mm). This optional tuning part is designed for racers looking to adjust front-end response and handling on the 22X 2WD buggy platform. Features & Benefits: Optional -2mm shock tower lowers front shock mounting points Carbon fiber construction for lightweight strength and rigidity Helps fine-tune suspension geometry and handling characteristics Precision cut for accurate fit and consistent performance Compatibility: Team Losi Racing 22X 2WD Buggy Includes: (1) -2mm Carbon Fiber Front Shock Tower A great tuning option for racers looking to dial in front-end feel and suspension performance on their 22X.    

Read more less

Upgrade front-end durability with this Powerhobby aluminum front gear box. CNC-machined from aluminum and anodized for a clean finish, it’s a direct replacement for the stock unit and helps reduce flex under load. Features: CNC-machined aluminum construction Increased strength and rigidity over stock plastic Precision fit for reliable drivetrain performance Available in Black, Red, or Blue anodized finishes Direct replacement design Fits: Arrma 1:18 Granite Grom Arrma 1:18 Typhon Grom Arrma 1:18 Mojave Grom Losi 1:12 AWD NASCAR Part Number: PHB6565    

Read more less

Improve steering strength and mounting flexibility with this Powerhobby 6061 aluminum two-position servo mount. CNC-machined from durable 6061 aluminum, this mount is a direct replacement for the stock servo mount and offers increased rigidity and reliability. Features: CNC-machined 6061 aluminum construction Two-position servo mounting design Increased strength over stock plastic mount Precision fit for consistent steering performance Direct replacement installation Fits: Arrma 1:18 Granite Grom Arrma 1:18 Typhon Grom Arrma 1:18 Mojave Grom Losi 1:12 AWD NASCAR Replaces: ARA320753Part Number: PHB6745 Ideal for racers and bashers looking to upgrade durability and steering reliability on their Grom or NASCAR platform.  

Read more less

Upgrade your front-end strength and steering precision with this Powerhobby aluminum steering knuckle. CNC-machined from high-quality aluminum, this is a direct replacement for the stock plastic part, offering improved durability and consistent steering performance. Features: CNC-machined aluminum construction Increased strength and durability over stock Precision fit for smooth, reliable steering Available in Red, Black, or Blue anodized finishes Fits: Arrma 1:18 Mojave Grom Losi 1:12 AWD NASCAR Replaces: ARA330841 Perfect for racers and bashers looking to reduce flex, improve reliability, and add a custom look.  

Read more less

The ProTek RC Braided Brushless Motor Sensor Cable is a premium replacement sensor wire designed for sensor-based brushless motor systems that use removable sensor harnesses. Built for reliability and durability, this cable ensures clean, consistent signal transfer between your ESC and motor—race after race. Why You’ll Want It This cable uses individual silicone-shielded sensor wires wrapped in a black braided nylon sleeve, giving it excellent flexibility while protecting against abrasion, vibration, and shock. Shrink-wrapped ends keep everything secure and tidy, making it ideal for high-performance racing environments where reliability matters most. Features Compatible with most sensor-based brushless ESC & motor systems Individual silicone-shielded sensor wires for flexibility Braided nylon outer sheath for abrasion and impact protection Shrink-wrapped ends for durability and clean routing Smooth, reliable data transfer between ESC and motor Lightweight and race-proven design Specifications Length: 90mm Part Number: PTK-2107 Type: Brushless Motor Sensor Cable Wire Protection: Braided nylon sleeve with silicone-shielded internal wires Perfect for racers looking to replace a worn sensor wire or upgrade to a more durable, track-ready option that won’t hold your electronics back.

Read more less