Overview:Dial in your drivetrain with the Team Associated RC10B84 Differential Height Inserts. These precision-molded inserts allow you to easily adjust the height of the differentials in your B84, fine-tuning traction, handling balance, and driveshaft angles for any track condition. A critical tuning option for racers looking to maximize consistency and performance. Features: Precision-molded inserts for differential height adjustment Fine-tunes traction and balance by changing driveshaft angles Quick and easy to install or swap at the track Durable and lightweight construction Genuine Team Associated tuning accessory Compatibility: Team Associated RC10B84 1/10 4WD Buggy (front and rear differentials) Includes: (1) Set of Differential Height Inserts (various heights) Part Number: 92513 ⚡ Pro Tip: Use a lower diff height for improved stability and traction on bumpy or low-grip tracks, and a higher diff height for increased corner speed and sharper handling on high-grip surfaces.  

Read more less

Fine-tune your XB2’s rear-end handling with the XRAY Short Rear Anti-Roll Bar series. Designed for precision adjustment, these sway bars control body roll and improve cornering stability, giving you the flexibility to adapt your buggy to any track condition. A softer bar provides more rear grip and smoother steering response, while a stiffer bar sharpens steering and reduces rear traction. Choose the perfect thickness to match your setup! Available Sizes: 1.0mm (323490) – Softest 1.1mm (323491) 1.2mm (323492) 1.3mm (323493) 1.4mm (323494) 1.6mm (323496) – Hardest Effects of Rear Roll Bar Changes: Softer Bar: Increases chassis roll Increases rear grip in corners Decreases on-power steering Car responds more slowly to direction changes Stiffer Bar: Decreases chassis roll Decreases rear grip in corners Increases on-power steering Car responds quicker to direction changes Features: High-quality spring steel construction Short design for precise handling response Essential tuning part for competitive setups Compatibility: XRAY XB2 (All Versions) Includes: (1) Short Rear Anti-Roll Bar (size selected)    

Read more less

The XRAY Composite Front Bridge Upper Deck provides extra rigidity and stability to your chassis setup. Precision-molded from high-quality composite material, this part is designed for strength without unnecessary weight, giving your buggy the perfect balance of performance and durability. Features: Molded composite construction for strength and consistency Helps increase front-end stability Lightweight design maintains optimal chassis flex Direct replacement part for quick installation Compatibility: XRAY XB2 (various years) XRAY XT2 (various years)

Read more less

The XRAY Differential Gasket Set is a must-have replacement pack for maintaining smooth, leak-free differential performance. Made from precision-cut, high-quality material, these gaskets create a perfect seal to keep diff oil where it belongs and extend the life of your drivetrain. Features: Precision fit to ensure consistent diff sealing High-quality material resists wear and compression Maintains smooth, reliable differential action Essential for regular maintenance and rebuilds Includes:(4) Differential Gaskets Compatibility: Fits XRAY differentials across multiple platforms (commonly used in XB2, XB4, XT4, and related models)

Read more less

⚙️ Precision Front Drivetrain HousingThe Team Associated RC10B84 Front Gearbox is a direct replacement part engineered to keep your buggy’s front drivetrain running smoothly. Made from durable composite material, this gearbox housing ensures proper alignment of your front diff and gears, maintaining consistent performance under the rigors of racing. 🔧 Features: ✅ Genuine Team Associated replacement part for the RC10B84 ✅ High-strength molded composite construction ✅ Keeps gears and differential securely in place ✅ Restores drivetrain efficiency after wear or damage 📦 Includes: (1) Front Gearbox Housing    

Read more less

📌 Restore Factory Suspension PerformanceThe Team Associated RC10B84 Front Shock Tower is a direct replacement part designed specifically for the B84 platform. Built to factory specs, this tower keeps your suspension geometry true, ensuring consistent handling and durability on the track. ⚙️ Features: Precision-molded for a direct RC10B84 fit Maintains correct suspension geometry Strong and lightweight construction Ideal replacement for worn or damaged shock towers 📦 Includes: (1) RC10B84 Front Shock Tower 💡 Pro Tip: Keep both front and rear shock towers in your pit box—having spares on hand is the fastest way to recover from a hard crash and get back in the race.  

Read more less

Team Associated RC10B84 Body – Clear (92554) 🏁 Race-Optimized Replacement – Designed specifically for the RC10B84 platform, this low-profile clear body delivers improved aerodynamics and the clean, aggressive Factory Team look. Perfect for racers who want both performance and a fresh canvas for custom paint schemes. ⚙️ Features:✅ Low-profile design for enhanced aerodynamics✅ Molded from durable, lightweight polycarbonate✅ Clear shell – ready for your custom paint job✅ Factory Team fit and finish for competitive racing 📦 Includes: (1) Clear RC10B84 Body (unpainted) 🔧 Compatibility: Team Associated RC10B84 💡 Pro Tip: Pair this body with lightweight wing options to further dial in downforce and stability for your track conditions.    

Read more less

Boost your steering accuracy and reliability with the Team Associated Factory Team Aluminum Clamping Servo Horn. Built for 23-tooth servos, this 20mm horn features a clamping design that locks securely in place, preventing slippage under high loads. Features: CNC-machined aluminum for superior strength and precision Clamping design ensures a secure, slip-free connection 20mm length for tuned steering leverage and response Fits 23T spline servos Factory Team quality for pro-level durability and performance Includes: (1) Aluminum Clamping Servo Horn – 23T, 20mm Ideal for racers who want maximum steering control and long-lasting reliability.

Read more less

Team Associated RC10 4WD Ball Cups (20pcs) [6535] 🔧 Classic performance, restored! Refresh your vintage ride with this set of Team Associated RC10 4WD Ball Cups. Designed specifically for the RC10 Classic, RC10T, and RC10 Worlds editions, these molded plastic rod ends are built for strength, precision, and smooth suspension action. ✅ Direct replacement for factory originals✅ Secure fit on tie rods and turnbuckles✅ Restores tight, responsive steering and suspension✅ Made for RC10 Classic, RC10T, and RC10 Worlds Includes:(20) Ball Cups (Rod Ends) 📦 Part Number: 6535🏁 Brand: Team Associated

Read more less

Team Associated B64 Plastic Gear Differential Gear Set – ASC92076🔧 Smooth Power Transfer, Race-Ready Performance Keep your B64 running smooth with this genuine Team Associated Plastic Gear Differential Set. Whether you're rebuilding or replacing worn-out gears, this set includes everything needed for one full diff—ensuring reliable, consistent drivetrain performance on the track. ✅ Factory replacement for the RC10B64 series✅ Durable plastic gears for lightweight performance✅ Includes all internals needed for one differential rebuild 📦 Includes:• Complete internal gear set for one differential 🔢 Part Number: ASC92076🏁 Brand: Team Associated  

Read more less

Team Associated FT Carbon Fiber Front Suspension Arms – ASC92297 Precision Performance for RC10B74.1 & B74.1D Upgrade your B74.1's front end with these Factory Team Carbon Fiber Front Suspension Arms, engineered for lightweight strength and high-traction performance. These arms deliver sharper, more stable handling, especially in fast corners and on high-grip tracks. ⚙️ Features: ✅ Carbon Fiber Construction – Extreme rigidity for responsive steering and stability ✅ 12% Lighter than “hard” material arms ✅ Boosted Durability – Significantly stronger than standard “hard” arms ✅ Factory Team quality for competition-level performance 📦 Includes: (1) Left Front Carbon Suspension Arm (1) Right Front Carbon Suspension Arm ✅ Compatibility: Team Associated RC10B74.1 Team Associated RC10B74.1D 🔧 Perfect for racers seeking precision handling and reduced unsprung weight.

Read more less

Team Associated FT 3x35mm V2 TiN Shock Shafts – ASC91623 High-Performance Titanium Nitride Shock Shafts for #91579 Upgrade your suspension system with the 3x35mm Factory Team V2 TiN Shock Shafts, designed for use with #91579 truck rear shock bodies. Featuring a durable Titanium Nitride (TiN) coating, these shafts reduce friction and wear, delivering smoother and more consistent shock performance. ⚙️ Features: ✅ TiN coating for enhanced durability and ultra-smooth operation ✅ Screw-mounted piston design for secure, reliable assembly ✅ V2 shock shaft spec for modern Team Associated platforms 📦 Includes: (2) 3x35mm V2 TiN Shock Shafts ✅ Compatibility: #91579 – Truck Rear Shock Bodies Not compatible with E-clip pistons 🏁 Trusted Factory Team engineering — made to withstand the rigors of high-performance RC racing.

Read more less

Team Associated 4mm Factory Team Heavy Duty Titanium Ball Stud Set (2) (91750)Upgrade your RC ride with strength and precision! The Team Associated Factory Team 4mm Heavy Duty Titanium Ball Stud Set offers superior durability with lightweight performance. Perfect for high-stress suspension points where reliability matters most. Includes: (2) 4mm Heavy Duty Titanium Ball Studs Factory Team Quality — Trusted by Pros!

Read more less

Team Associated 13mm Front Shock Spring (Grey/4.60lbs) (54mm) [71161]🛞 Dial in that perfect front-end feel!Upgrade your T6.2 or SC6.2 with the 13mm Front Shock Springs in Grey (4.60 lbs/in). At 54mm long, these springs are engineered for plush low-speed bump absorption and strong high-speed support. That means more grip, better landings, and next-level consistency lap after lap.💥 Features:✅ Grey rate: 4.60 lbs/in✅ Length: 54mm✅ Designed for 13mm bore shocks✅ Ideal balance of soft feel and responsive support✅ Includes 2 springs📦 Part Number: 71161🏁 Brand: Team Associated

Read more less

Team Associated RC10 B6.2 CVA Axle (2) [91858] 🔧 Keep your ride tight and true! These Team Associated RC10 B6.2 CVA Axles are direct replacement parts designed to restore the performance and precision of your buggy's driveline. Whether you're rebuilding or just stocking up, these 2 high-quality axles are built to take the abuse of competitive 1/10 off-road racing. ✅ Compatible with B6.2 & B6.2D✅ Precision-machined for smooth drivetrain action✅ Sold in pairs Includes:(2) CVA Axles 📦 Part Number: 91858🏁 Brand: Team Associated

Read more less

This is a Team Associated Front Axle Crush Tube set, intended for use with the Team Associated RC10 B74 Team 1/10 4WD Off-Road Electric Buggy as replacement for the kit supplied front axel crush tubes. Includes: (2) Front Axle Crush Tubes 

Read more less

  Upgrade your slipper clutch with the Team Associated 19mm Octalock Slipper Pad. Featuring the Octalock design, this pad offers improved consistency, smoother power delivery, and longer-lasting performance compared to standard slipper pads. ✅ Octalock Design – Delivers smoother engagement and improved slipper consistency✅ Durable Material – Built to handle high power and repeated use✅ Direct OEM Replacement – Genuine Team Associated part for perfect fitment Includes: (1) 19mm Octalock Slipper Pad Compatibility: Team Associated vehicles equipped with 19mm Octalock spur gears and slipper assemblies (B6.2, B6.3, B6.4, T6.2, T6.4, SC6.2, SC6.4, and B74 series) Check your manual for exact fitment Part #: 92288

Read more less

Team Associated RC10B7 Factory Team Vented Slipper Hubs – ASC92451 Consistent Performance. Cleaner Operation. Upgrade your RC10B7 with the Factory Team Vented Slipper Hubs. These precision-engineered hubs feature vented slots that help flush debris from the slipper pad assembly—ensuring smoother, more consistent slipper action during demanding runs. ⚙️ Features: ✅ Factory Team upgrade for the RC10B7 ✅ Vented design expels debris from slipper area ✅ Enhances consistency and durability of the slipper clutch ✅ Ideal for high-traction and dusty conditions 📦 Includes: (2) Vented Slipper Hubs ✅ Compatibility: • • RC10B7

Read more less

Team Associated RC10B74.2 FT Lightweight Driveline Center Kit – ASC92372 Maximize Efficiency. Minimize Rotational Mass. Take your RC10B74 to the next level with the Factory Team Lightweight Center Driveline Kit. Designed specifically for 13.5T Spec class racing, this kit reduces rotational mass by an impressive 19.3g compared to the standard steel setup—resulting in quicker acceleration and improved handling. ⚙️ Features: ✅ Reduces center driveline mass by 19.3g ✅ Includes lightweight dogbones and aluminum outdrives ✅ Plastic blade inserts reduce metal-to-metal wear ✅ Designed for use with center differential (not slipper) ✅ Ideal for 13.5T Spec racing class 📦 Includes: Lightweight center dogbones Aluminum outdrives Plastic blade inserts Complete hardware for installation ✅ Compatibility: RC10B74 RC10B74.1 RC10B74.1D RC10B74.2 RC10B74.2D ⚠️ Note: Not recommended for modified racing or use with slipper clutch systems. 🏁 Built for racers chasing every gram of performance advantage.

Read more less

Team Associated RC10B74.2 Differential Pinion Gear Shims (5x6.5x1mm) – ASC92319 Precision Spacing for Consistent Gear Mesh. These Factory Team 5x6.5x1mm differential pinion gear shims are designed specifically for the RC10B74.2 and B74.2D. Ideal for maintaining correct gear mesh and minimizing drivetrain wear, these shims ensure smooth differential operation and long-term performance. 🔧 Features: ✅ OEM-quality replacement shims ✅ Sized 5x6.5x1mm for perfect pinion gear fit ✅ Helps fine-tune gear mesh and reduce wear ✅ Compatible with RC10B74.2 & B74.2D 📦 Includes: (Set of) Differential Pinion Gear Shims (5x6.5x1mm) 🛠️ Keep your drivetrain dialed in with these must-have tuning components!

Read more less

Team Associated Factory Team RC10B6.4/B6.4D 3.5mm Titanium Turnbuckle Set. These are optional titanium turnbuckles intended for the Team Associated B6.4 and B6.4D platforms. Constructed from high quality titanium these offer increased durability over stock components. Package includes two titanium front camber links, two titanium rear camber links and two titanium steering links.. NOTE: 3.5mm Ballcups are required for installation (ASC92308). COMPATIBILITY: Team Associated RC10B6.4Team Associated RC10B6.4D

Read more less

The Team Associated RC10B74.1 Factory Team "Carbon" Side Rails are an optional upgrade for the Team Associated RC10B74 series models. These carbon fiber composite option parts are impregnated with rigid and light carbon fibers inside the injection molded material to create a lighter, more durable part with optimized rigidity to create the ultimate high performance composite part.Features: Lightweight: Approximately 12% weight savings over “hard” material. Extreme Rigidity: More predictable handling in high traction applications and increased vehicle stability in fast corners. Improved Durability: Significantly improved strength over “hard” option parts. COMPATIBILITY: Team Associated RC10 B74 OriginalTeam Associated RC10 B74.1Team Associated RC10 B74.1DTeam Associated RC10 B74.2Team Associated RC10 B74.2D

Read more less

Team Associated 3.5x42mm Steel Turnbuckles. These are replacement steering and front camber link turnbuckles intended for the RC10B74.2 and B74.2D series of vehicles. Package includes two 3.5x42mm turnbuckles. COMPATIBILITY: Team Associated RC10 B74.2Team Associated RC10 B74.2D

Read more less

Team Associated RC10B74 HD Differential Outdrives. These are replacement outdrives intended for the RC10B74 and RC10B74D buggies. Package includes two outdrives. COMPATIBILITY: Team Associated RC10 B74.2Team Associated RC10 B74.2D

Read more less

Team Associated RC10B7/RC10B7D Laydown Gearbox – Precision Replacement for 2WD Performance! 🔧 Keep your buggy in top form with this genuine replacement Laydown Gearbox Housing for the Team Associated RC10B7 and RC10B7D. Designed specifically for the 2WD platform, this gearbox delivers the durability, fit, and reliability you expect from Team Associated — straight from the Factory Team lineup. ⚙️ Key Features: ✅ Official Team Associated replacement part✅ Designed for laydown transmission configuration✅ Ensures proper gear mesh and alignment✅ Molded for durability and exact fitment✅ Ideal for maintenance, rebuilds, or spares 📦 Includes: (1) Laydown Gearbox Housing ✅ Compatibility: Team Associated RC10B7 Team Associated RC10B7D 💡 Maintain top-tier performance with factory-spec reliability.Team Associated—trusted by champions. 🏁🔩

Read more less

Team Associated RC10B7 Chassis [92400] 🛠️ Built to Battle, Ready to RaceRefresh your ride with the Team Associated RC10B7 Chassis — the factory replacement designed to get your buggy back in action and keep it dominating the track. Crafted for strength and performance, this is the exact chassis used on the legendary RC10B7 platform. ✅ Precision fit✅ Factory quality✅ Made to handle serious abuse Includes:(1) RC10B7 Chassis Part Number: 92400Compatibility: RC10B7 1/10 Buggy

Read more less

Pro-Motion Viper 2.2" Rear LP Carpet Buggy Tires (2) — C4 Red (Soft Compound)Part #: 3090-C4 Dialed for Grip. Designed to Win. The Pro-Motion Viper 2.2" Low-Profile (LP) Rear Buggy Tire is built for next-level performance on high-traction carpet and turf tracks. The LP carcass reduces sidewall flex for improved stability, while the directional tread with tapered mini pins delivers smooth, predictable traction. C4 Red compound brings the extra softness needed for maximum bite in low-grip or cooler conditions. ✅ Low-profile design for reduced flex and razor-sharp response✅ C4 Red soft compound optimized for maximum traction✅ Dual mini wedge edges + radial rib for stable, consistent grip✅ Directional tread for tunable performance✅ Ideal for modern carpet and turf racing 📦 Includes:(2) Viper 2.2" Rear LP Tires(2) Black Closed Cell Inserts 💡 Pro Tip: Run C4 in colder conditions or low-grip indoor tracks to bring your setup to life.

Read more less

Pro-Motion Viper 2.2" Rear LP Carpet Pre-Mount Buggy Tires (2) — Yellow (C3 Green/Medium)Part #: 3090-C3-Y Low-Profile Speed. Carpet-Tuned Control. Engineered for precision, the Pro-Motion Viper 2.2" LP Rear Buggy Tire is built to dominate on high-traction carpet and turf tracks. With a low-profile carcass for reduced sidewall flex and quicker response, the Viper delivers unmatched stability and cornering grip. Its tapered pin tread and directional radius pattern provide predictable traction, while mini wedges and a radial rib add versatility across various conditions. ✅ Pre-mounted on yellow wheels—ready to race✅ Low-profile carcass enhances response and stability✅ Tapered mini pin design for maximum grip✅ Directional tread for fine-tuned traction control✅ Designed for 1/10 scale carpet and turf racing✅ C3 compound for medium traction balance 📦 Includes:(2) Viper LP Rear Pre-Mounted Tires(2) Foam Inserts 💡 Pro Tip: Combine with Pro-Motion Slim Front LPs for a fully dialed-in carpet setup.

Read more less

Team Associated RC10 Factory Team 1.02 Gold Shock Shafts (2)PART: 6417 These Factory Team 1.02 Gold Shock Shafts are precision replacements for the original Team Associated RC10. Engineered for smooth shock action and durability, these shafts are a direct fit and deliver race-ready performance with signature gold coating. Includes: (2) 1.02 Gold Shock Shafts Compatibility: Team Associated RC10 (Original)  

Read more less

Team Associated 7.8x3.5x2.0mm Aluminum Hub Spacer Washers – Blue (10) – Part 31389Maximum Spacing. Race-Ready Adjustability. The Team Associated 7.8x3.5x2.0mm Blue Aluminum Hub Spacer Washers (31389) are ideal for making larger wheelbase and hub spacing adjustments on RC8B3 and RC8T3 series vehicles—or any platform that uses 3.5mm hinge pins. Durable and lightweight, these aluminum washers are a reliable tuning option for racers who want full control over rear-end geometry. ✅ Size: 7.8mm OD x 3.5mm ID x 2.0mm thick✅ Anodized blue 7075 aluminum – high strength, low weight✅ Designed for wheelbase and hub spacing adjustments✅ Compatible with 3.5mm hinge pin platforms✅ Pairs perfectly with 0.5mm and 1.0mm spacers (sold separately) 📦 Includes: (10) 7.8x3.5x2.0mm Blue Aluminum Hub Spacer Washers Part #: 31389 💡 Pro Tip: Use thicker spacers like this to extend wheelbase for more high-speed stability or track-specific tuning.

Read more less

Team Associated 7.8x3.5x0.5mm Aluminum Hub Spacer Washers – Blue (10) – Part 31387Fine-Tune Wheelbase. Maximize Setup Precision. The Team Associated 7.8x3.5x0.5mm Blue Aluminum Hub Spacer Washers (31387) are perfect for adjusting wheelbase and tuning suspension geometry on vehicles with 3.5mm hinge pins. Commonly used on the RC8B3 and RC8T3 series, these lightweight spacers are also compatible with other platforms that accept 3.5mm hinge pins. ✅ Pack of 10 high-precision spacers✅ Size: 7.8mm OD x 3.5mm ID x 0.5mm thick✅ Blue anodized aluminum – lightweight and corrosion-resistant✅ Used for fine-tuning wheelbase and hub spacing✅ Compatible with RC8B3, RC8T3, and any vehicle using 3.5mm hinge pins✅ Also available in 1.0mm and 2.0mm thicknesses (sold separately) 📦 Includes: (10) 7.8x3.5x0.5mm Blue Aluminum Hub Spacer Washers Part #: 31387 💡 Pro Tip: Stack different thicknesses to get the exact rear end length or toe-in setup you're after.

Read more less

🏎️🏆 Celebrate One of Formula 1’s Greatest Legends! Relive the dominance of the legendary Ferrari F2004 and seven-time Formula 1 World Champion Michael Schumacher with this premium LEGO Icons collector set. Designed for adult builders and motorsport enthusiasts, this detailed display model captures the iconic Ferrari that defined the 2004 F1 season. A must-have centerpiece for Ferrari fans, Formula 1 collectors, and LEGO enthusiasts. 🏁 About This LEGO Icons Set 🏎️ Authentic Ferrari F2004 Replica This detailed Formula 1 model features: Working steering Detailed cockpit Realistic V10 engine Grooved slick tires with Bridgestone Potenza printing 🏆 Michael Schumacher Display Tribute Includes a Michael Schumacher minifigure with: Driver helmet Winner’s trophy Podium-style display stand Printed quote tribute 🖼️ Premium Display Model Designed for collectors and display enthusiasts, this set looks incredible in offices, game rooms, shelves, or automotive-themed setups. 🔧 Key Features ✔ Official LEGO Icons Ferrari F1 collector set✔ Detailed Ferrari F2004 Formula 1 replica✔ Functional steering system✔ Detailed V10 engine✔ Michael Schumacher minifigure included✔ Display stand with vehicle stats✔ Premium adult-oriented build experience✔ Great motorsports display piece 📦 Includes (1) LEGO Icons Ferrari F2004 Building Kit (1) Michael Schumacher Minifigure Driver Helmet Accessory Winner’s Trophy Vehicle Display Stand Driver Display Podium Building Instructions 📊 Specifications Set Number: 10375 Piece Count: 735 Pieces Height: 2.5in (7cm) Length: 12.5in (32cm) Width: 5in (13cm) Recommended Age: 18+ 💡 Perfect For ✔ Ferrari fans✔ Formula 1 enthusiasts✔ Michael Schumacher collectors✔ Adult LEGO builders✔ Office & display decor✔ Motorsport memorabilia collectors ⚠️ Notes Designed for ages 18+ Contains small parts Additional LEGO Formula 1 sets sold separately

Read more less

🚙🏞️ Bring Off-Road Adventure Home! The LEGO Technic Jeep Wrangler Rubicon SUV combines authentic Jeep styling with realistic Technic functionality for an exciting off-road building experience. Packed with working features, suspension, steering, and detailed accessories, this build is perfect for young Jeep fans and LEGO vehicle enthusiasts alike. Designed for builders ages 10 and up. 🏁 About This LEGO Technic Set 🚙 Realistic Jeep Wrangler Features This detailed Jeep model includes: Working steering Flexible suspension Opening hood Detailed V6 engine Spare tire steering control 🦆 Fun Jeep Culture Details Includes a collectible rubber duck accessory inspired by the popular Jeep “ducking” tradition, plus a removable surfboard for added adventure styling. 🖼️ Build, Play & Display Perfect for imaginative off-road play and looks great displayed on a shelf, desk, or bedroom setup. 🔧 Key Features ✔ Official LEGO Technic Jeep Wrangler model✔ Functional steering and suspension✔ Opening hood with detailed V6 engine✔ Spare tire steering function✔ Includes rubber duck accessory✔ Includes removable surfboard✔ Great STEM-focused building experience 📦 Includes (1) LEGO Technic Jeep Wrangler Rubicon SUV Building Kit Rubber Duck Accessory Removable Surfboard Building Instructions 📊 Specifications Set Number: 42227 Piece Count: 723 Pieces Height: 6in (15cm) Length: 10in (26cm) Width: 5.5in (14cm) Recommended Age: 10+ 💡 Perfect For ✔ Jeep enthusiasts✔ LEGO Technic fans✔ Off-road vehicle collectors✔ STEM-focused building fun✔ Birthday & holiday gifts ⚠️ Notes Contains small parts Recommended for ages 10+ Additional LEGO Technic sets sold separately

Read more less

🏎️✨ Race Into the Future of Formula 1! Celebrate the excitement of F1 ACADEMY racing with the LEGO Speed Champions F1 ACADEMY LEGO Race Car! Inspired by the LEGO Group’s official 2026 F1 ACADEMY race car, this detailed build lets young racing fans recreate high-speed action and display an authentic motorsports model. Perfect for kids, LEGO builders, and Formula 1 fans ages 10 and up. 🏁 About This LEGO Speed Champions Set 🏎️ Authentic F1 ACADEMY Race Car Design Features realistic race-inspired details including: Rear wing Halo safety system Pirelli printed tires Detailed cockpit 👩🔧 Includes Driver Minifigure Comes with a female F1 ACADEMY driver minifigure equipped with: Racing helmet Wig Wrench accessory 🖼️ Great for Play & Display Perfect for imaginative racing adventures or displaying proudly on a shelf, desk, or bedroom setup. 🔧 Key Features ✔ Official LEGO Speed Champions set✔ Inspired by the 2026 F1 ACADEMY race car✔ Includes female driver minifigure✔ Detailed Formula 1 styling✔ Compact collectible display model✔ Great for racing fans and LEGO collectors✔ Compatible with other Speed Champions sets 📦 Includes (1) LEGO Speed Champions F1 ACADEMY Race Car Building Kit (1) Female Driver Minifigure Helmet, Wig & Wrench Accessories Building Instructions 📊 Specifications Set Number: 77258 Piece Count: 201 Pieces Height: 1.5in (4cm) Length: 7in (18cm) Width: 2.5in (7cm) Recommended Age: 10+ 💡 Perfect For ✔ Formula 1 fans✔ LEGO Speed Champions collectors✔ Young racing enthusiasts✔ Display and play setups✔ Birthday & holiday gifts ⚠️ Notes Contains small parts Recommended for ages 10+ Additional Speed Champions sets sold separately

Read more less

Upgrade or replace your rear suspension with the Team Associated RC10B7.1 V2 Rear Suspension Arms. Designed for the latest B7.1 platform, these 78mm arms offer improved durability and performance, while also serving as a popular upgrade option for the original B7. ⚙️ Updated V2 Design. The V2 arms are engineered to provide: Improved durability under hard racing conditions Consistent suspension movement Reliable performance on high-bite surfaces like carpet and turf Perfect for racers pushing their cars to the limit. 🏁 Race-Ready PerformanceThese 78mm rear arms help maintain proper geometry and provide a stable rear end, giving you better confidence through corners and over jumps. ⚡ Features Genuine Team Associated replacement/upgrade part V2 updated design for improved durability 78mm rear suspension arms Smooth and consistent suspension performance Ideal for racing on carpet and turf   📦 Includes: (2) 78mm Rear Suspension Arms 🔧 Compatibility: RC10B7.1 (direct fit) RC10B7 (optional upgrade) A must-have replacement or upgrade to keep your B7 platform dialed in, durable, and race-ready.        

Read more less

🔌⚡ Clean Wiring. Reliable Signal. Low-Profile Design. The ProTek RC Flat Sensor Wire is designed to provide consistent, interference-free communication between your sensored brushless motor and ESC. With a slim, flat design, it keeps your build clean while improving wire routing in tight chassis layouts. 🏁 About This Sensor Wire 📏 Clean, Low-Profile Routing The flat cable design allows easy routing under components and through tight spaces, reducing clutter and improving overall build appearance. ⚡ Reliable Signal Transfer Engineered for consistent, interference-resistant communication, ensuring smooth motor performance in sensored brushless setups. 🎯 Perfect Fit Length At 150mm, this cable is ideal for a wide range of 1/10 scale applications and clean electronics layouts. 🔧 Key Features ✔ Low-profile flat cable design✔ Reliable signal transfer for sensored systems✔ Slim construction for easy routing✔ Helps reduce wiring clutter✔ Interference-resistant performance✔ Optimized for brushless motor/ESC communication 📦 Includes (1) Flat Sensor Wire (150mm) 📊 Specifications Length: 150mm 🧰 Recommended Use Sensored brushless motor to ESC connection Clean electronics installations Organized wiring setups  

Read more less