Team Associated RC10B7 Factory Team Carbon Rear Suspension Arms (2) – Lightweight Tuning for High-Bite Tracks! 💨 Take your RC10B7 handling to the next level with Factory Team Carbon Rear Suspension Arms. Built from AE’s proven lightweight carbon composite, these arms reduce unsprung weight and eliminate flex — giving you the precision and durability needed for high-grip conditions and competitive edge. 🔧 Key Features: ✅ Factory Team carbon composite material – ultra-light and super strong✅ Tuned stiffness for reduced flex and consistent rear traction✅ Ideal for high-bite tracks and competitive setups✅ Includes rear arm spacers for quick tuning adjustments✅ Race-proven performance, direct fit upgrade 📦 Includes: (2) Carbon Rear Suspension Arms (Arm Spacers) ✅ Compatibility: Team Associated RC10B7 Team Associated RC10B7D 🏁 Race harder, turn sharper, and accelerate faster with precision carbon upgrades.Factory Team quality you can feel. 🔧🔥

Read more less

  📡 Compact, Reliable, and Built for Electric RC PrecisionThe Futaba R304SB-E is a 4-channel, telemetry-capable receiver designed specifically for electric-powered RC vehicles. Featuring Futaba’s T-FHSS protocol, this receiver provides lightning-fast response, high signal stability, and full telemetry capability in a compact and efficient package. Unlike its sibling (the R304SB), the R304SB-E features a built-in internal antenna, providing a sleek, snag-free design ideal for tight chassis layouts and high-performance on-road or off-road builds. ⚙️ About the R304SB-E Perfectly matched for Futaba’s T-FHSS transmitters (such as the 4PM, 4PM+, and 7PXR), the R304SB-E delivers reliable control and telemetry feedback while maintaining a compact footprint. It’s optimized for electric vehicle (EP) applications, ensuring clear, interference-free operation under racing conditions — without the signal noise that can occur in gas or nitro setups. This receiver supports S.Bus2 connectivity, allowing advanced telemetry sensors to plug directly into the system, giving drivers access to live voltage, temperature, RPM, and more (depending on transmitter support). 🌟 Features T-FHSS Telemetry System – Real-time telemetry feedback 4-Channel Output – Ideal for most 1/10 and 1/8 electric vehicles S.Bus2 Compatible – Connect telemetry sensors directly Built-in Internal Antenna – Clean look, no exposed wire High-Speed Signal Transmission – Fast response for competitive driving Electric Models Only – Designed specifically for EP applications Compact & Lightweight Design – Perfect for tight chassis layouts 📊 Specifications Specification Detail Futaba System T-FHSS Channels 4 Telemetry Yes (T-FHSS only) S.Bus2 Ports 1 Range 70m (230ft) under optimal conditions Rated Voltage 4.8–7.4V Usable Voltage 3.5–8.4V Dimensions 35.1 × 23.2 × 12.5mm Weight 6.7g Connector Type J (Standard) Recommended Use Electric Powered Vehicles Only ⚠️ Important Notes ⚡ Electric Only: Not suitable for nitro or gas-powered models. 🚫 Compatibility: Works only with Futaba T-FHSS transmitters.(Not compatible with FHSS, S-FHSS, FASST, or FASSTest systems.) 📦 Includes (1) Futaba R304SB-E 4-Channel Receiver 🏁 Compact, telemetry-ready, and purpose-built for electric racing — the Futaba R304SB-E delivers precision and performance trusted by serious RC enthusiasts.

Read more less

Upgrade your hardware with these Team Associated M4 Low Profile Serrated Steel Wheel Nuts. Designed for a secure grip, the built-in serrations bite into the wheel surface to prevent loosening during high-impact runs or long race days. ✅ Features:• Low-profile design for improved clearance• Serrated face for extra locking power• Strong steel construction for durability• Standard M4 thread size 📦 Includes:• (10) M4 Serrated Steel Wheel Nuts🔧 Part Number: 91150💡 Ideal for 1/10 scale RC vehicles requiring M4 hardware.

Read more less

This is a Team Associated Rear Hub Link Mount set of two, intended for use with the Team Associated RC10 B74 Team 1/10 4WD Off-Road Electric Buggy to replace the kit supplied link mounts. COMPATIBILITY: Team Associated RC10 B74 OriginalTeam Associated RC10 B74.1Team Associated RC10 B74.1DTeam Associated RC10B6.2Team Associated RC10B6.2D  

Read more less

Avid 7" High-Clearance Wing Set (Standard) – Uncut (2pcs) [AV10129-S] Product Overview: The Avid 7" High-Clearance / Low Drag Wing is meticulously engineered for 1/10 buggies requiring maximum airflow efficiency and structural integrity. Featuring high clearance wheel cutouts, smooth airflow shaping, and unmatched durability, this wing set is the perfect solution for racers demanding both performance and strength. This version includes two uncut wings in standard thickness, providing flexibility for trimming and custom fitment. Features: Set of two 7” uncut wings Standard thickness for maximum durability and longevity High-clearance wheel arches for improved tire clearance 18.5° low-drag rear angle relieves downforce pressure without compromising strength Small raised centerline mark for quick and precise centering during mounting Eight side support ribs for structural strength during impacts Embossed AVID logo at the center of each wing Includes gurney options to fine-tune rear traction (sold separately) Includes: (2) Avid 7" Uncut High-Clearance Wings (Standard Thickness) Part Number: AV10129-S

Read more less

Overview:Protect your electronics and add style to your setup with the 1UP Racing LowPro Bullet Plug Grips w/5mm Bullets. These grips slide directly onto 1UP 4mm and 5mm LowPro Bullet Plugs to clearly identify positive (+) and negative (–) wires, helping prevent costly mistakes while offering a professional finish. CNC machined from high-quality aluminum, they feature bold red and black anodizing, laser-etched polarity markings, and a silver outer ring for excellent grip and premium looks. The included 1UP 5mm LowPro Bullet Plugs have a low-profile 2mm tall head with 6-point contact for reduced resistance and a total length of 15mm—perfect for today’s LCG LiPo packs. Features: Instantly identifies positive (+) and negative (–) wires Prevents pulling on wires when unplugging your battery Hides messy solder joints for a cleaner look Precision CNC aluminum grips with black/red anodizing & laser etching Silver outer ring for excellent grip Includes: 1 Pair of LowPro Bullet Plug Grips (Black/Red) 1 Pair of 5mm LowPro Bullet Plugs Compatible with 1UP 4mm & 5mm LowPro Bullet Plugs (sold separately) Recommended: Secure with a drop of CA glue after installation Compatibility: Works with all 1UP Racing 4mm & 5mm LowPro Bullet Plugs Ideal for use with modern LCG LiPo batteries

Read more less

📏 Fine-Tune Your Gear Ratio for Maximum 17.5 Power!The TLR 48 Pitch Direct Drive Spur Gears are precision-engineered for the TLR Direct Drive System (TLR332043), giving you ultimate control over your gearing setup. Whether you need more top-end speed or quicker acceleration, choose from 69T, 72T, or 75T options to match your track conditions and dial in your 17.5 stock setup like a pro. 🔧 Features: Designed specifically for the TLR Direct Drive System (TLR332043) Available in multiple tooth counts for perfect gearing: 69T, 72T, or 75T Precision-molded for smooth, quiet operation Ideal for 17.5 stock class racing 🏁 Optimize. Adapt. Win.These spurs help extract every ounce of performance when you're chasing podiums. Don't just race—race smart with the right spur gear. ✅ Note:The 69T and 75T spurs are included with TLR332043 but are also sold individually here for replacements or spares.

Read more less

The Team Associated RC10B74 Front Suspension Arm Set is a genuine OEM replacement designed to restore the handling and durability of your buggy. Precision-molded from high-quality composite, these arms are built to withstand the demands of competitive racing. ✅ Durable Composite Construction – Strong and lightweight for racing performance✅ Direct OEM Replacement – Genuine Team Associated parts for perfect fit✅ Precision Fitment – Maintains proper suspension geometry and handling Includes: (1) Front Suspension Arm Set (left & right) Compatibility: Team Associated RC10B74 series buggies (RC10B74, B74.1, B74.1D, B74.2, B74.2D) Check your manual for exact fitment Part #: 92128

Read more less

Team Losi Racing 22 5.0 Aluminum Clamping Servo Horn (Black) (25T)PART: TLR331033 Upgrade your steering precision with the Team Losi Racing 25T Aluminum Clamping Servo Horn, designed specifically for the 22 5.0 Electric Buggy Kits. This optional servo horn is CNC-machined from lightweight aluminum for strength and reliability under high stress. Finished in black anodizing with chamfered edges, it adds a touch of style while delivering top-tier performance. The clamping design ensures a secure, tight fit to your servo. Features: Precision-machined from lightweight aluminum Durable black anodized finish with chamfered accents Clamping style for secure fitment Compatible with 25T spline servos Designed for 22 5.0 Electric Buggy Kits

Read more less

Reedy Flat Sensor Wire (150mm) – ASC980Keep your electronics tidy and your setup dialed with this Reedy Flat Sensor Wire. Originally included with Reedy Sonic motors, these high-quality flat wires are now available separately to fit your custom build needs. The flat design not only looks sleek but also makes routing easier and cleaner in tight spaces. Ideal for both 1/10 and 1/8 scale applications. 📏 Length: 150mm💡 Available in sizes from 70mm to 270mm ✅ Perfect for: Cleaner wiring layout Reedy Sonic motors and other ROAR-approved ESC/motor combos OEM Part #: ASC96980

Read more less

Team Associated 10mm Heavy Duty Ballstud Set (8) [91049]🔧 Tough Where It Counts!The Team Associated 10mm Heavy Duty Ballstud Set is built for strength and reliability. Perfect for high-performance applications, these ballstuds offer the durability you need to keep your suspension tight and responsive under stress. Ideal for SC10 4x4, B5, and B5M platforms. 🛠 Features:✅ Heavy-duty construction for demanding RC action✅ Designed for precision fit and consistent performance✅ 10mm length—perfect for a wide range of setups✅ Trusted Team Associated quality 📦 Includes:(8) 10mm Heavy Duty Ballstuds 🔥 Part Number: 91049🏁 Compatible With: SC10 4x4, B5, B5M

Read more less

Team Associated 13mm Front Shock Spring. These replacement springs are intended for the Team Associated B6.4, however, they will also work with the Team Associated B6.4D as a tuning option. Package includes two springs. Effects of Shock Spring Changes  Shock Spring  Characteristic  Softer Increased Chassis Roll Increased Traction Better in Bumpy Conditions More Likely to Bottom Out  Stiffer Decreased Chassis Roll Decreased Traction Increased Responsiveness COMPATIBILITY: Team Associated RC10 B74.2Team Associated RC10 B74.2DTeam Associated RC10B6.4Team Associated RC10B6.4D

Read more less

Team Associated Rear Body, Wing & Fan Mount Set w/ Bumper – RC10B74.2 Complete Rear-End Hardware Refresh for B74.2 & B74.2D Restore factory fit and performance with this genuine replacement mount set from Team Associated. Designed for the RC10B74.2 and B74.2D platforms, this kit includes everything needed to secure the rear body, wing, and cooling fan—plus the rear bumper for extra protection. 🔩 Features: 🔧 Factory-spec replacement for easy installation 💨 Fan mount helps improve ESC cooling 🪶 Includes wing spacer and washers for secure aero setup 🛡️ Rear bumper adds protection without extra weight 📦 Includes: (1) Rear Body Mount (2) Wing Mounts (1) Wing Spacer (2) Wing Washers (1) Fan Mount (1) Rear Bumper ✅ Compatibility: Team Associated RC10B74.2  Team Associated RC10B74.2D

Read more less

Product Overview The Avid Ringer Wing Buttons are designed to have that extra pop of two silver highlights without sacrificing durability. Details 7075-T6 Aluminum anodized with two silver highlight areas for that extra pop. M3 flat head screw design to fit nearly every 8th and 10th vehicle on the market. Available colors: Black, Blue, Red, Pink, Orange, and Silver. Each package includes 2 Wing Mount Buttons.

Read more less

Overview:Dial in your carpet racing performance with the JConcepts Fuzz Bite LP Carpet Front Tires. Designed specifically for 1/10 scale 4WD buggies, these low-profile (LP) tires feature a finely spaced pin pattern optimized for today’s high-traction carpet tracks. The Pink compound provides maximum grip and consistency, making these tires the go-to choice for competitive indoor racing. Features: 2.2” low-profile front tires for 1/10 4WD buggies Optimized pin-style tread for high-grip carpet surfaces Molded in Pink (medium) compound for balanced grip and wear Designed for precision steering response and forward bite Genuine JConcepts racing product Compatibility: Fits all standard 2.2” 1/10 scale 4WD buggy front wheels Perfect for modern carpet racing applications Includes: (2) Fuzz Bite LP Carpet 2.2" 1/10 4WD Buggy Front Tires (Pink Compound) Part Number: 3108-010 ⚡ Pro Tip: Pair these with JConcepts LP rear tires for a perfectly balanced setup on carpet tracks, and always break them in lightly for maximum consistency on race day.  

Read more less

Restore precision steering to your B6.4 or B6.4D with this genuine Team Associated replacement set. The kit includes two steering bell cranks and a steering rack, designed to keep your front-end dialed in and race-ready. 🔧 Features: Direct replacement for the RC10B6.4 and B6.4D Includes (2) bell cranks and (1) steering rack Durable, race-proven design ✅ Compatibility: RC10B6.4 RC10B6.4D Ideal for racers who want tight, responsive steering and long-lasting performance.

Read more less

Team Associated RC10B6.2 Rear Suspension Arm, 73mm (91885)Upgrade or replace your buggy's rear end with this 73mm rear suspension arm designed for the RC10B6.2. Engineered for optimal durability and race-ready performance, it's a direct replacement part that keeps your handling sharp and consistent. ✅ Official Replacement – For the RC10B6.2✅ 73mm Length – Ideal for specific tuning setups✅ Durable Composite Material – Built to handle high-impact racing✅ Precision Molded – Ensures consistent fit and suspension geometry 📦 Includes:– (1) Rear Suspension Arm, 73mm Perfect for spares or to replace a worn or damaged arm. Get your buggy dialed in and back on track!

Read more less

Team Associated SC6.1 Front Bumper & Nerf Bars [71124] 🛡️ Toughen up your short course rig! This Team Associated SC6.1 Front Bumper & Nerf Bars set is the direct replacement for your SC6.1. Whether you're rebuilding after a bash or just want fresh hardware, this kit has what you need to keep your truck protected and track-ready. ✅ Durable factory replacement parts✅ Designed for precise fit on the SC6.1✅ Adds rugged front-end protection and side impact resistance Includes:(1) Front Bumper(1) Bumper Brace(2) Nerf Bars 📦 Part Number: 71124🏁 Brand: Team Associated

Read more less

Team Associated 13mm Front Shock Spring. These replacement springs are intended for the Team Associated B6.4, however, they will also work with the Team Associated B6.4D as a tuning option. Package includes two springs. Effects of Shock Spring Changes  Shock Spring  Characteristic  Softer Increased Chassis Roll Increased Traction Better in Bumpy Conditions More Likely to Bottom Out  Stiffer Decreased Chassis Roll Decreased Traction Increased Responsiveness COMPATIBILITY: Team Associated RC10B6.4Team Associated RC10B6.4D

Read more less

Dominate the carpet with JConcepts' Fuzz Bite Wide front tires—built for precision, steering response, and longevity. The wide-body, low-profile design delivers quick transitions and reduced roll, while the reverse “water tower” pin layout grips tight in high-traction conditions. Engineered for elite-level performance on tight-knit turf or CRC-style carpeting. Features:• Low-profile, wide-body carcass for improved stability• Reverse “water tower” pins for precision grip• Radius-positioned pins deliver consistent traction• Directional sidewall lugs for steering response• Lightweight scalloped tire beads reduce unsprung weight• Includes two scalloped foam inserts  

Read more less

Reedy B5 Flat Sensor Wire (125mm) – ASC96994Keep your electronics dialed and your wiring clean with the Reedy Flat Sensor Wire designed specifically for B5 series vehicles. At 125mm, it's a perfect fit for tight, compact setups where shorter wire runs are essential. The flat profile offers a streamlined look and hassle-free routing—ideal for racers looking to keep things tidy under the body. ✅ Designed for: RC10B5 / RC10B5M Fits most 1/10 ESC/motor setups 📏 Length: 125mm🧰 Flat wire for better cable management🔌 ROAR-legal sensor connection OEM Part #: ASC96994  

Read more less

Team Associated B6 Laydown Idler Gear (39T) (91716)Keep your laydown transmission running smooth with these genuine Team Associated 39T idler gears. Designed for the RC10 B6, B6.1, and B6.2 series buggies with a laydown setup, these are the direct replacements you need for peak drivetrain performance. Includes: (2) 39T Idler Gears Compatibility: RC10 B6 RC10 B6.1 RC10 B6.2 (with laydown transmission)

Read more less

Team Associated Factory Team RC10T6.2/SC6.2 3.5mm Titanium Turnbuckle Set. This is an optional titanium turnbuckle set intended for the Team Associated T6.2 and SC6.2 platforms. Constructed from high quality titanium these offer increased durability over stock components while shedding weight and replace all the stock turnbuckles. Package includes two titanium front camber links, two titanium rear camber links and two titanium steering links.NOTE: 3.5mm Ballcups are required for installation (ASC92308). COMPATIBILITY:   Team Associated RC10 SC6.2Team Associated RC10 T6.2 

Read more less

Cayote 2S 145C LCG Shorty LiHV Battery (7.6V/4600mAh) – w/5mm Bullets Dominate the Track with Low CG Power!Engineered for serious RC racers, the Cayote 2S 145C LCG Shorty LiHV Battery delivers lightning-fast acceleration, responsive throttle control, and high output — all in a lightweight, low-profile package. Perfect for 1/10 and 1/8 scale platforms seeking better balance and extreme performance. ✅ Features: 🔻 LCG (Low Center of Gravity) design for enhanced handling & cornering ⚡ 145C continuous discharge rate for aggressive power delivery 🏁 Built for competitive racing – from high-speed asphalt to rugged off-road 🔋 LiHV (High Voltage) technology boosts efficiency and top-end power 🔌 5mm bullet connectors for a secure, low-resistance connection 🧱 Hard case design ensures durability in demanding environments ✅ ROAR approved 📦 Includes: (1) Cayote 2S 145C LCG Shorty LiHV Battery (7.6V/4600mAh) 5mm bullet terminals (battery side) 📊 Specifications: Voltage: 7.6V (2S LiHV) Capacity: 4600mAh Discharge Rate: 145C continuous Charge Rate: Max 1C Connector: 5mm Bullets (Battery) / 2mm (Balance) Dimensions: 95.8 x 46.5 x 18.5mm Weight: 162g Configuration: 2S1P Watt Hours: 34.96Wh ROAR Approved: ✅ Yes Power meets precision — the Cayote 145C Shorty LiHV is your go-to pack for next-level racing. 🏆

Read more less

Exalt X-Rated 2S 130C 4400mAh LCG LiPo Battery (w/5mm Bullets) High Performance. Low Profile. Built for Drift & Racing. The Exalt X-Rated 4400mAh 2S LiPo is engineered for serious racers who demand both performance and reliability. Built with cutting-edge Silicon Graphene technology, this pack offers lower resistance, cooler operation, and a flatter discharge curve — perfect for intense drift sessions or on-road racing. Its low center of gravity design makes it ideal for tight chassis layouts where balance is key. ⚙️ Features: ✅ 130C Continuous / 260C Burst Discharge Rate ⚡ Silicon Graphene Technology for lower temps and extended cycle life 🔋 LCG (Low Center of Gravity) design – perfect for drift and optional shorty setups 🔌 5mm High-Amp Bullet Connectors for secure, high-current connection 🏎️ Designed for high-voltage, low-resistance performance 📐 Specifications: Capacity: 4400mAh Voltage: 7.4V (2S) Continuous Discharge: 130C Max Burst Discharge: 260C Weight: 167g ± Dimensions: 96 x 47 x 20mm (LxWxH) Connector Type: 5mm Bullet Style: LCG Shorty Pack (Optional Drift Layout) 💥 Perfect for 1/10 drift builds, touring cars, and racing buggies requiring a compact, low-profile battery solution.  

Read more less

Fine-tune the rear suspension of your RC10B6.3 with the Wide “C” Arm Mount from Team Associated. Made from high-quality aluminum for added strength and precision, this Factory Team upgrade delivers improved durability and consistent geometry for high-performance setups. 🔥 Key Features: Factory Team aluminum arm mount for increased rigidity Wide “C” mount geometry for specific rear pivot configurations CNC-machined for precise fit and performance Hard-anodized finish for wear resistance and professional look Perfect for racers needing a durable, race-ready upgrade ✅ Compatibility: RC10B6.3 RC10B6.3D Also fits other RC10B6-series vehicles using the wide C arm mount configuration 📦 Includes: (1) Aluminum Arm Mount C (Wide) ⚠️ Tip:Pair with the correct A/B/D mounts to achieve your desired anti-squat and toe-in settings.

Read more less

Team Associated RC10B6.2 Rear Suspension Arm, 73mm   ASC91853

Read more less

  Team Associated RC10 T6.1 Body Posts V2 (Part #71135)📦 Optional Upgrade – Durable. Versatile. Track-Ready. These Team Associated Body Posts V2 are a direct replacement for the RC10 T6.1 Stadium Truck, providing reliable body mounting and fitment. Whether you're replacing worn parts or upgrading your setup, these posts deliver factory precision and long-lasting durability. 🛠️ Originally designed for the T6.1, these body posts may also be compatible with newer Team Associated stadium trucks that share similar chassis designs. Always double-check fitment with your specific model. 🔧 Includes: (2) V2 Body Posts (2) Mounting Screws ✅ Features: Official Team Associated part #71135 Precision molded composite Direct fit for T6.1 – may fit T6.2 and SC6 series (confirm fitment) Strong and lightweight

Read more less

Team Associated Gear Differential Rebuild [91463]🛠 Freshen Up Your Diff!Keep your ride dialed with the Team Associated Gear Differential Rebuild Kit, designed specifically for the optional ASC91461 gear diff. Whether you're doing routine maintenance or bringing a worn-out diff back to life, this kit has what you need to keep your buggy smooth, responsive, and race-ready. 🧰 Features:✅ Designed for the optional ASC91461 gear differential✅ Genuine Team Associated parts for perfect fit and function✅ Ideal for performance rebuilds and regular maintenance 📦 Includes:All necessary components to rebuild one gear differential 🔥 Part Number: 91463

Read more less

Team Associated RC10B6.2 Factory Team Carbon 75mm Rear Suspension Arms [91874] 💪 Lightweight. 💨 Rigid. 🏁 Race-Proven. Upgrade your RC10B6.2 with the Factory Team Carbon 75mm Rear Suspension Arms—built for racers who demand precision, strength, and speed. Crafted from ultra-rigid carbon material, these arms deliver sharper handling, improved durability, and better stability in high-traction conditions. ✅ 12% lighter than standard "hard" arms✅ Stronger and more durable than previous options✅ Improves high-speed stability and cornering control✅ Ideal for high-traction tracks✅ Direct Factory Team fit and finish Includes:(2) Carbon 75mm Rear Suspension ArmsPlastic Shims 📦 Part Number: 91874🔧 Brand: Team Associated🏎️ Compatible with: RC10B6.2

Read more less

All new from LC Racing, the BHC-1 is a 1/14 scale 2WD racing buggy designed specifically for mini-class competition. With a mid-motor layout, 2.0mm aluminum chassis, and race-inspired suspension geometry, this buggy delivers true competition performance in a ready-to-run package. Choose between blue or black accent options to match your style and hit the track fully equipped. ⚡ Features: Purpose-built for 1/14 2WD racing Mid-motor configuration for balanced handling 2.0mm 6061-T6 aluminum chassis Threaded oil-filled shocks for smooth suspension response Turbo Hobby 2-in-1 ESC/Receiver (waterproof) LC Racing 390-size 23T brushed motor Batan D116 metal-gear servo (includes upgrade D132 servo option) Secure battery strap design Full ball bearings throughout Mini pin racing tires with dish wheels Direct servo steering for precision control Comes fully assembled and race-ready 🔋 Electronics Included: Gens Ace 1300mAh 2S 30C LiPo battery USB charging cable (wall adapter sold separately) 2.4GHz radio system (requires 4x AAA batteries) 📏 Specifications: Length: 305mm (12 in) Width: 195mm (7.67 in) Height: 110mm (4.33 in) Ride Height: 20mm (0.8 in) Wheelbase: 210mm (8.26 in) 🎨 Color Options: Blue Accents Black Accents Part #: BHC-1

Read more less

Fine-tune your RC10B6.4 with this comprehensive tuning and hardware set from Team Associated. The #91978 Factory Team accessory pack includes everything needed to install a front wing, fan mounts, and adjust your battery brace height—all in one convenient kit. 📦 Includes: (1) Front Wing Mount (2) Fan Mounts (1) Battery Brace Shim Necessary hardware ⚙️ Key Features: Direct fit for RC10B6.4 and RC10B6.4D models Optional tuning parts to optimize airflow, improve downforce, and enhance cooling Lightweight and durable composite materials Designed by Team Associated for maximum performance & reliability This kit is perfect for racers who want to dial in their setup for competitive advantage. Whether you're aiming for better aerodynamics or more efficient motor cooling—this set has you covered.

Read more less

  Precision and reliability come standard with the RC10B74 Steering Blocks from Team Associated. Designed for durability and consistent performance, these blocks are a direct fit for your RC10B74 front-end steering assembly. 🔧 Key Features: OEM replacement for stock steering blocks Molded composite construction for long-lasting strength Maintains factory geometry and performance Lightweight yet rugged design 📦 Includes: (2) Steering Blocks (left and right) ✅ Compatibility: Team Associated RC10B74 May fit other RC10B74 variants (consult manual for fitment) Restore your steering performance or keep a spare set in your pit bag—these steering blocks are an essential component for smooth, responsive control on the track.

Read more less

🔧 Premium V2 Screw-Mount Front Shock ShaftsUpgrade your buggy's performance and durability with these Ti-Nitride coated 3x21mm shock shafts—built for smooth suspension action and long life! 💡 Key Features: Ti-Nitride coating reduces wear and improves shock performance Screw-mounted design keeps pistons secure NOT compatible with E-clip pistons 🔩 Includes:(2) Front Shock Shafts – 3x21mm ✅ Compatibility:Use with ASC91576 V2 shock bodies  

Read more less

Team Exalt X-tra Light-Speed Machined Delrin 48P Spur GearPART #: EXA4866 – EXA4874Available in 66T–74T (1-Tooth Increments) Team Exalt delivers again with their X-tra Light-Speed Spur Gears, precision-machined from ultra-durable Delrin for maximum performance and minimal weight. These 48-pitch gears are crafted to exacting tolerances for racers who demand consistency, smoothness, and every edge in competition. Now available in tooth counts from 66T to 74T, each gear allows you to fine-tune your gearing with confidence. Designed to handle high horsepower and aggressive setups, these lightweight spurs are the perfect match for Exalt’s elite motors and battery systems. Features: CNC-Machined Delrin for ultimate strength and precision Ultra-lightweight design: only 2.8g–3.6g 48 Pitch gearing for smooth power delivery Offered in 1-tooth increments from 66T to 74T Designed to handle the demands of competitive racing Compatible with most 1/10 scale electric RC platforms Includes: (1) Delrin Spur Gear (Select tooth count: 66T–74T) Trusted by champions. Built for speed. Dial in your drivetrain with Team Exalt.

Read more less

Team Exalt X-Rated 2S LiPo Battery (4400mAh/150C)📦 Part #: EXA3201 Dominate the track with the Team Exalt X-Rated 4400mAh 2S LiPo – engineered with next-gen chemistry for racers who demand maximum voltage, minimum resistance, and race-winning consistency. Whether you're running stock or mod, this pack delivers explosive acceleration and sustained punch all the way to the finish. ⚡ X-Rated Series Performance Highlights: 150C Continuous / 300C Burst Discharge Rate Silicon Graphene Technology for increased efficiency and lifespan Flat Discharge Curve means less sag, more power throughout your run Low Internal Resistance and cooler operating temps 5mm High-Amp Bullet Connectors for maximum current delivery ROAR Approval Pending 📊 Battery Specifications: Capacity: 4400mAh Voltage: 7.4V (2S) Discharge Rate: 150C Burst Rate: 300C Weight: 220g ± Dimensions: 96 x 47 x 25.1mm (LxWxH) Connector Type: 5mm Bullets Whether you're chasing podiums or pushing for personal bests, the EXA3201 X-Rated LiPo gives you the edge in acceleration, efficiency, and endurance.

Read more less