Team Exalt Phoenix 13.5T Gold Spec Brushless Motor – Offroad Carpet Version📦 Part #: EXA01135GSC Engineered for dominance on high-grip surfaces, the Phoenix 13.5T Gold Spec is the pinnacle of Team Exalt’s brushless motor line. Purpose-built for competitive offroad carpet racing, this motor is hand-built, precision-tuned, and Motolyser-verified to deliver maximum efficiency, speed, and consistency. 🏆 Gold Spec / Specialized Version Highlights: 💎 Top % Stator & Rotor from production batch 🧲 Sensor Deviation Guaranteed ≤ 1.0° ⚙️ Grade 10 Ceramic Bearings (metal shielded) 📊 Motolyser Tuned & Printout Included ✅ Sealed with Team Exalt Gold Spec Certification 🛠️ Technical Features: Designed for 1/10 Scale Offroad Carpet Racing CNC-machined 7075 Aluminum Two-Piece Can 90° Solder Tabs for cleaner and more secure wiring Infinite Timing Adjustability for race-specific tuning Thermal Epoxy-Filled Stator enhances heat dissipation Ultra-Rare Earth Magnet Formula resists heat and maintains magnetic strength under stress EXAS2305 Rotor installed Replaceable Sensor Board High Purity Copper Windings High-Heat-Resistant Materials throughout construction Rebuildable Design to extend motor life ROAR Approved for sanctioned events 📦 Includes: (1) Phoenix 13.5T Gold Spec Motor (EXA01135GSC) (1) Motolyser Printout Sheet Gold Spec Seal (Factory Installed) 🔧 Application-Specific Tuning:Gold Spec motors are built and tuned based on intended use—factoring in size, surface type, and climate. Minor final adjustments may still be needed to fine-tune performance for your exact conditions. 🔥 Whether you're club racing or chasing the podium at nationals, the Phoenix Gold Spec delivers world-class performance right out of the box.

Read more less

Team Associated RC10B74.2 Differential Pinion Gear Shims (5x6.5x1mm) – ASC92319 Precision Spacing for Consistent Gear Mesh. These Factory Team 5x6.5x1mm differential pinion gear shims are designed specifically for the RC10B74.2 and B74.2D. Ideal for maintaining correct gear mesh and minimizing drivetrain wear, these shims ensure smooth differential operation and long-term performance. 🔧 Features: ✅ OEM-quality replacement shims ✅ Sized 5x6.5x1mm for perfect pinion gear fit ✅ Helps fine-tune gear mesh and reduce wear ✅ Compatible with RC10B74.2 & B74.2D 📦 Includes: (Set of) Differential Pinion Gear Shims (5x6.5x1mm) 🛠️ Keep your drivetrain dialed in with these must-have tuning components!

Read more less

Team Associated 27.5mm Carbon Fiber Rear Shock Tower – RC10B74.1 Rear-End Stability Meets Lightweight Strength The RC10B74.1 27.5mm Carbon Fiber Rear Shock Tower is a factory replacement part built for racers demanding durability and precision. Designed for use with the Team Associated B74.1 and B74.1D 1/10 scale 4WD electric buggies, this rear tower offers optimal geometry and weight savings. ⚙️ Features: 🪶 Lightweight carbon fiber construction 🛠️ Precision fit and finish for factory-level performance 📏 27.5mm shock mounting height for consistent rear suspension response 📦 Includes: (1) 27.5mm Carbon Fiber Rear Shock Tower ✅ Compatibility: Team Associated RC10B74.1 Team Associated RC10B74.1D Engineered to handle the demands of high-speed racing—bolt on and dominate.  

Read more less

Team Associated Aluminum LRC "D" Arm Mount – RC10B74.1 Optimize rear suspension geometry with precision. The ASC92261 Aluminum LRC "D" Arm Mount is a factory replacement part designed for the RC10B74.1 and B74.1D 1/10 scale 4WD electric buggies. Built from durable aluminum, this mount delivers enhanced strength and consistent performance under race conditions. ⚙️ Features: 🧱 CNC-machined aluminum for increased durability 📐 LRC (Low Roll Center) geometry helps fine-tune rear suspension behavior 🔧 Direct fit replacement for kit-supplied “D” arm mount 📦 Includes: (1) Aluminum LRC "D" Arm Mount ✅ Compatibility: Team Associated RC10B74.1 Team Associated RC10B74.1D Maintain your edge on the track with genuine Team Associated tuning components.

Read more less

1up Racing LowPro 5mm Bullet Plugs – Ultra-Low Resistance, Pro-Level Finish ⚡ Dial in your wiring setup with 1up Racing LowPro 5mm Bullet Plugs — engineered for elite-level performance and clean installs. These compact, low-profile plugs feature an oversized 6-point contact for rock-solid connections and ultra-low resistance, maximizing efficiency and power delivery. 💡 Designed with a deep solder recess and only 15mm total length, these plugs are ideal for tight spaces and lightweight builds. Perfect for all LiPo batteries with 5mm inputs. ✨ Key Features: 🔩 LowPro Design – Just 15mm long for reduced weight and a cleaner install⚡ Oversized 6-Point Contact – Ensures secure fit and minimal resistance🔥 Easy-Solder Recess – Create strong, clean solder joints with 11–16 gauge wire📦 Universal Fit – Compatible with all LiPo packs using 5mm bullet connectors🛠️ Lightweight & Efficient – Built for performance and durability 📦 What’s in the Box? ✔️ (2) 1up Racing LowPro 5mm Bullet Plugs 💡 Upgrade Your Wiring Game – Get 1up Racing LowPro Bullet Plugs Today!

Read more less

1up Racing Curved Glue Tips feature a steel tip which is easy to unclog for extended use. A single tip can last the life of a bottle of glue! Universal fit. For use with thin viscosity CA glue. Package includes ten tips.

Read more less

Upgrade your XB4C 2025’s drivetrain with the precision-engineered XRAY ECS (Equalized CVD System) Front Drive Shaft Set. Made from HUDY Spring Steel™, these 84mm shafts deliver smoother steering, reduced wheel chatter, and improved cornering speed—especially on high-traction tracks. The ECS system equalizes rotational speeds between the inside and outside wheel, helping your buggy carry more corner speed with less steering bind. Features: CNC-machined HUDY Spring Steel™ construction for extreme durability ECS design reduces wheel chatter & increases cornering stability Provides more consistent steering response Set includes (2) 84mm ECS front drive shafts Genuine XRAY quality and fit Benefits of ECS vs. Standard CVDs: Smoother steering at high speeds Increased steering precision in and out of corners Reduced front tire wear Ideal for medium to high traction conditions Compatibility: XRAY XB4C 2025 – 1/10 4WD Carpet Edition Buggy (Front) May also be used on other XB4 versions with 84mm front shafts (check manual for confirmation). Part Number: 365203

Read more less

Upgrade your drivetrain with the XRAY Composite Adjustment Ball-Bearing Hubs. Engineered for precision and durability, these hubs provide smoother rotation, reduced friction, and consistent performance under high-stress racing conditions. Features: Strong composite construction for lightweight durability Precision ball-bearing design for smoother drivetrain performance Helps reduce slop and improve efficiency Easy installation and long-lasting reliability Includes: (2) Composite Adjustment Ball-Bearing Hubs Compatibility: Fits XRAY XB2 / XT2 / XB4 platforms (check manual for specific fitment)

Read more less

The XRAY Composite Rear Upright (Lower Position – Graphite) is designed to provide precise handling and durability for your XB2/XB4. The lower roll center mounting gives improved cornering stability, making it an excellent choice for high-traction tracks where control and consistency are key. Features: Graphite composite material for maximum strength and rigidity Lower roll center mounting improves rear traction and stability Designed for high-traction surfaces and competitive setups Precision XRAY engineering ensures perfect fit and long life Compatibility: XRAY XB2 XRAY XB4 Includes: (1) Composite Rear Upright – Lower Position – Graphite

Read more less

The JConcepts RM2 Metal Car Stand, designed with Ryan Maifield, is built for racers who demand durability and style. Featuring a bold Red finish and RM2 branding, this stand is perfect for 1/10 and 1/8 scale vehicles, giving you a stable platform for pit work and maintenance. Features: Heavy-duty metal construction for long-lasting use Sleek RM2 red finish with official Ryan Maifield branding Rotating top plate with padded surface to protect your chassis Compact, travel-friendly design for race day convenience Works with most 1/10 and 1/8 scale RC cars and trucks Why You’ll Love It:A pro-level stand that combines function with Ryan Maifield’s iconic RM2 style—rugged, reliable, and ready for your race program.  

Read more less

The XRAY 9° Graphite Composite C-Hub is a high-performance upgrade that improves steering precision and durability on your XB4 buggy. Molded from a tough graphite-infused composite, this hub reduces flex and delivers consistent handling — ideal for high-traction tracks like carpet and turf. About the C-HubWith a built-in 9° caster angle, this hub sharpens steering response while keeping the buggy stable in high-speed corners. The lightweight, reinforced design ensures dependable performance through intense racing conditions. Features: Graphite composite construction for maximum stiffness and durability 9° caster angle for improved steering precision Lightweight design with factory fit and finish Direct replacement part for stock hubs Includes:(1) Graphite 9° Composite C-Hub (choose right or left side) Compatibility: XRAY XB4 1/10 4WD Buggy (all versions – confirm fit in manual)

Read more less

The XRAY XB4 Graphite Front Lower Suspension Arm is a precision-engineered upgrade for racers looking to maximize durability and responsiveness. Made from premium graphite composite, this arm reduces flex while maintaining lightweight strength, giving you sharper steering and improved consistency on high-grip surfaces. About the Suspension ArmDesigned specifically for competitive 1/10 4WD buggy racing, the graphite blend adds rigidity compared to standard composite arms, making it ideal for fast, technical tracks where precision is critical. Features: High-strength graphite composite material Reduced flex for sharper and more predictable handling Lightweight design maintains optimal suspension geometry Direct factory replacement for easy installation Includes:(1) Graphite Front Lower Suspension Arm Compatibility: XRAY XB4 1/10 4WD Buggy (all versions – verify with model year manual for exact fitment)

Read more less

The XRAY XB2 Front Outer Pivot Pins are durable, precision-machined replacements engineered to keep your buggy’s suspension tight and consistent. Designed for smooth operation and long-lasting performance, these pins ensure accurate alignment and dependable handling through every race. Features: Precision-machined steel construction Ensures consistent suspension geometry Built for strength and durability Direct replacement for the XB2 buggy Includes:(2) Front Outer Pivot Pins      

Read more less

The XRAY XB2 Front Inner Suspension Pivot Pins are precision-machined replacements built to handle the demands of competitive racing. Designed for strength and accuracy, these pins maintain exact suspension geometry for consistent handling and durability. Features: High-strength steel construction Precision fit for smooth suspension operation Maintains accurate geometry under load Direct replacement for the XB2 buggy Includes:(2) Front Inner Suspension Pivot Pins      

Read more less

🛞 Smooth, Precise Steering ControlThe Team Associated RC10B84 Steering Bellcranks are a direct replacement set designed to restore or upgrade your buggy’s steering system. Built from durable composite material, these bellcranks provide consistent, slop-free steering response to keep your B84 handling sharp on the track. 🔧 Features: ✅ Genuine Team Associated replacement part for the RC10B84 ✅ High-strength molded construction for long-lasting durability ✅ Maintains precise steering geometry and smooth movement ✅ Easy installation — direct fit to stock components 📦 Includes: (1) Set of RC10B84 Steering Bellcranks      

Read more less

⚙️ Precision Front Drivetrain HousingThe Team Associated RC10B84 Front Gearbox is a direct replacement part engineered to keep your buggy’s front drivetrain running smoothly. Made from durable composite material, this gearbox housing ensures proper alignment of your front diff and gears, maintaining consistent performance under the rigors of racing. 🔧 Features: ✅ Genuine Team Associated replacement part for the RC10B84 ✅ High-strength molded composite construction ✅ Keeps gears and differential securely in place ✅ Restores drivetrain efficiency after wear or damage 📦 Includes: (1) Front Gearbox Housing    

Read more less

Team Associated RC10B84 Rear Gearbox – ASC92511 ⚙️ Durable Rear Drivetrain HousingThe Team Associated RC10B84 Rear Gearbox is a genuine replacement part designed to restore strength and precision to your buggy’s drivetrain. Molded from high-quality composite material, this housing keeps your differential, gears, and driveshafts properly aligned under the toughest racing conditions. 🔧 Features: ✅ Direct fit replacement for RC10B84 ✅ High-strength molded composite construction ✅ Maintains gear alignment and drivetrain efficiency ✅ Essential for restoring performance after wear or crash damage 📦 Includes: (1) Rear Gearbox Housing  

Read more less

🛡️ Protect & ReinforceThe Team Associated RC10B84 Shock Tower Covers and Bumper Set is a direct replacement package designed to shield your shock towers and front end from damage during high-impact racing. Built to absorb hits and extend component life, this set keeps your buggy running longer and stronger. ⚙️ Features: ✅ Direct fit for the RC10B84 ✅ Shock tower covers help protect against cracking and wear ✅ Front bumper adds extra durability during impacts ✅ Lightweight molded construction designed for racing conditions 📦 Includes: (2) Shock Tower Covers (1) Front Bumper  

Read more less

⚡ Secure Power TransferThe Team Associated RC10B84 Motor Mount is a precision-engineered replacement part designed to keep your motor solidly in place while maintaining exact gear mesh and drivetrain alignment. Built for the rigors of high-performance racing, this mount ensures your buggy runs smooth, efficient, and consistent on the track. ⚙️ Features: ✅ Direct fit for the RC10B84 ✅ CNC-machined aluminum for strength and durability ✅ Provides accurate motor positioning and gear mesh ✅ Race-proven Factory Team quality and finish 📦 Includes: (1) RC10B84 Motor Mount    

Read more less

🏁 Factory Replacement PartThe RC10B84 Center Bulkhead (Diff) is a direct replacement designed specifically for the differential configuration of your B84 buggy. It provides a rigid and precise mounting point for the center diff, keeping your drivetrain secure and efficient during the toughest race conditions. ⚙️ Features: ✅ Fits RC10B84 with center differential configuration ✅ Ensures proper alignment and smooth drivetrain operation ✅ High-strength materials for durability and consistent performance ✅ Genuine Team Associated quality and fit 📦 Includes: (1) RC10B84 Center Bulkhead (Diff) 💡 Pro Tip: Pair with the ASC92529 Center Bulkhead Brace (Diff) for added stability and long-term reliability.  

Read more less

🏁 Precision Factory FitThe RC10B84 Center Bulkhead (DSC) is a genuine replacement part designed for the Direct Spool Configuration. It provides the secure mounting point for the center drivetrain components, ensuring reliable alignment and smooth power transfer through demanding race conditions. ⚙️ Features: ✅ Direct replacement for the RC10B84 (DSC configuration) ✅ Maintains precise drivetrain geometry and alignment ✅ Built from high-quality, durable materials ✅ Designed for competitive performance and long-lasting strength 📦 Includes: (1) RC10B84 Center Bulkhead (DSC) 💡 Pro Tip: Use alongside the ASC92530 Center Bulkhead Brace (DSC) for maximum rigidity and drivetrain stability.        

Read more less

🔧 Secure Your DrivetrainThe RC10B84 Center Bulkhead Brace (Diff) is a precision replacement part engineered to stabilize the center differential assembly. By reinforcing the bulkhead area, it helps maintain drivetrain alignment, reduces flex, and ensures consistent power delivery under high-stress racing conditions. ⚙️ Features: ✅ Direct replacement part for the RC10B84 ✅ Designed specifically for center differential configuration ✅ Provides additional strength to prevent chassis flex ✅ Durable and race-tested Factory Team quality 📦 Includes: (1) RC10B84 Center Bulkhead Brace (Diff) 💡 Pro Tip: Pair this with the FT Bearing Set (ASC92544) to keep your drivetrain smooth and efficient through long mains.        

Read more less

🛡️ Strength Where It CountsThe RC10B84 Center Bulkhead Brace (DSC) is a precision Factory Team component designed to reinforce the drivetrain area, helping your buggy stay rigid and balanced under racing loads. With the Decoupled Slipper Clutch (DSC) system, this brace maintains alignment and reduces chassis flex for more consistent performance. ⚙️ Features: ✅ Factory Team upgrade – engineered for race-level durability ✅ Designed specifically for the DSC drivetrain configuration ✅ Reinforces center bulkhead to maintain driveline stability ✅ CNC-machined aluminum with anodized finish for strength & style 📦 Includes: (1) RC10B84 Center Bulkhead Brace (DSC) 💡 Pro Tip: Run this with the FT Molded Ring & Pinion Set (ASC92543) to maximize drivetrain smoothness and strength in your B84.      

Read more less

🛠️ Lock Your Steering Power in PlaceThe RC10B84 Servo Mount is a direct replacement part that keeps your steering servo securely anchored, ensuring precise steering response every lap. Designed to fit perfectly on the B84 platform, this mount delivers reliability and consistent alignment under the toughest racing conditions. ⚙️ Features: ✅ Factory replacement for the RC10B84 ✅ Rigid mounting for consistent servo performance ✅ Lightweight design maintains balance without compromise ✅ Direct bolt-on fit with no modifications needed 📦 Includes: (1) RC10B84 Servo Mount 💡 Pro Tip: Pair this with a high-torque servo and the Steering Bellcrank Post Set (ASC92532) to maximize steering precision and durability in your B84.      

Read more less

🔩 Secure & Smooth Steering SupportThe RC10B84 Steering Bellcrank Post Set provides the solid mounting foundation your bellcrank assembly needs for precise and consistent steering. Built to factory specifications, these posts deliver strength and stability, keeping your buggy’s steering geometry dialed in under all track conditions. ⚙️ Features: ✅ Factory replacement for the RC10B84 ✅ Precision-machined posts for secure bellcrank mounting ✅ Maintains smooth steering response and durability ✅ Direct fit—no modifications required 📦 Includes: (1) RC10B84 Steering Bellcrank Post Set 💡 Pro Tip: When rebuilding your steering system, replace the bellcrank posts along with the steering rack (ASC92533) for maximum precision and to eliminate unwanted play.    

Read more less

🛠️ Restore Precision SteeringThe RC10B84 Steering Rack is a factory replacement component designed to keep your buggy’s steering system tight, consistent, and race-ready. Whether you’re rebuilding after wear or looking to maintain peak performance, this part ensures smooth, accurate steering response. ⚙️ Features: ✅ Direct factory replacement for the RC10B84 ✅ Maintains precise steering geometry and alignment ✅ Durable construction for long-lasting reliability ✅ Essential for smooth and predictable cornering performance 📦 Includes: (1) RC10B84 Steering Rack 💡 Pro Tip: Pair this steering rack with fresh bushings (ASC92534) to eliminate play and maximize steering accuracy during high-stress racing conditions.  

Read more less

🔧 Keep Your Steering Smooth & PreciseThe RC10B84 Steering Rack Hat Bushing Set is a direct replacement part designed to maintain the accuracy and smooth operation of your buggy’s steering system. Built to factory specs, these bushings ensure your steering rack operates freely with minimal slop—essential for consistent cornering and control. ⚙️ Features: ✅ Factory replacement set for the RC10B84 steering rack ✅ Helps maintain precise steering alignment ✅ Durable molded construction for long-lasting performance ✅ Easy drop-in installation 📦 Includes: (1) Steering Rack Hat Bushing Set 💡 Pro Tip: If your steering feels loose or inconsistent, replacing worn bushings can instantly improve handling and responsiveness—one of the simplest upgrades for sharper control.

Read more less

🏁 Restore or Upgrade Your Steering PrecisionThe RC10B84 Caster Block Set is a direct replacement designed to keep your buggy’s front-end geometry tight and consistent. Whether you’re replacing worn parts or refreshing your ride for peak performance, these caster blocks ensure smooth, predictable steering and durability under racing conditions. ⚙️ Features: ✅ Factory-spec replacement for the RC10B84 platform ✅ Maintains precise caster angle and suspension geometry ✅ High-strength molded composite construction ✅ Designed for durability and consistent steering response 📦 Includes: (1) Left Caster Block (1) Right Caster Block 💡 Pro Tip: Always inspect hinge pins and kingpins when replacing caster blocks—worn hardware can affect steering accuracy just as much as the blocks themselves.  

Read more less

🏁 Durability Meets PrecisionUpgrade your RC10B84 with the “B” Arm Mount, crafted from CNC-machined aluminum for superior strength and accuracy. This high-performance replacement ensures consistent suspension geometry under stress, giving you sharper handling and rock-solid reliability on the track. ⚙️ Features: ✅ CNC-machined aluminum construction for maximum strength ✅ Precision hinge-pin alignment maintains suspension geometry ✅ Anodized finish adds durability and a pro-level look ✅ Direct fit replacement for the stock plastic “B” mount 📦 Includes: (1) RC10B84 “B” Arm Mount 💡 Pro Tip: Pair the “B” and “C” aluminum mounts for a balanced upgrade that improves both durability and consistency across your rear suspension.  

Read more less

🏎️ Factory Team Suspension UpgradeStep up your B84’s rear suspension with the Factory Team blue aluminum “C” arm mount. This precision-machined part replaces the stock plastic mount to deliver greater rigidity, tighter tolerances, and a clean anodized finish that looks as good as it performs. ⚙️ Features: ✅ Lightweight blue anodized aluminum for strength and corrosion resistance ✅ Improves suspension rigidity for consistent geometry under load ✅ Factory Team upgrade for race-grade durability and handling ✅ Direct replacement for the RC10B84 stock "C" mount 📦 Includes: (1) RC10B84 "C" Arm Mount (Blue Aluminum) 💡 Pro Tip: For best results, pair this upgrade with the correct suspension inserts from Associated to fine-tune your setup for track conditions.    

Read more less

🏁 Factory Team Efficiency UpgradeSwap in the Factory Team molded ring & pinion to reduce rotating mass and keep your B84’s diff running smooth and quiet. Precision-molded tooth profiles deliver consistent mesh and improved drivetrain efficiency. ⚙️ Features: ✅ Molded construction for lighter rotational mass and quieter operation ✅ Factory Team quality for precise tooth geometry and smooth mesh ✅ Direct fit for the RC10B84 differential ✅ Ideal spare or performance swap for efficiency-focused setups 📦 Includes: (1) Molded Ring Gear (1) Molded Pinion Gear 💡 Pro Tip: Great for stock-class efficiency. If you run high-power/mod setups, keep an eye on wear and diff shim settings to maintain a perfect mesh.  

Read more less

🏆 Factory Team Precision, Race-ReadyThe Team Associated RC10B84 Factory Team Bearing Set delivers premium performance with low-friction, high-durability bearings designed to keep your B84 running smooth and efficient. Built to withstand the demands of top-level racing, these bearings reduce drag, improve drivetrain efficiency, and extend longevity. ⚙️ Features: Genuine Factory Team high-performance bearings Sealed design for reduced maintenance and longer life Enhances drivetrain smoothness and efficiency Direct fit for the RC10B84 platform 📦 Includes: Complete Factory Team Bearing Set for RC10B84 💡 Pro Tip: Keep an extra bearing set in your pit bag—swapping in fresh bearings before big events can be the difference between a podium finish and a DNF.  

Read more less

📌 Restore Factory Suspension PerformanceThe Team Associated RC10B84 Front Shock Tower is a direct replacement part designed specifically for the B84 platform. Built to factory specs, this tower keeps your suspension geometry true, ensuring consistent handling and durability on the track. ⚙️ Features: Precision-molded for a direct RC10B84 fit Maintains correct suspension geometry Strong and lightweight construction Ideal replacement for worn or damaged shock towers 📦 Includes: (1) RC10B84 Front Shock Tower 💡 Pro Tip: Keep both front and rear shock towers in your pit box—having spares on hand is the fastest way to recover from a hard crash and get back in the race.  

Read more less

🔧 Restore Rear-End Structure – The RC10B84 Rear Shock Tower is a direct replacement part designed to bring your buggy back to factory specifications. It ensures consistent suspension geometry and handling after wear, damage, or heavy use. ⚙️ Features:✅ Direct replacement for the stock RC10B84 rear shock tower✅ Maintains suspension geometry and stable handling✅ Durable composite construction for long-lasting performance✅ Designed for easy fit and reliability 📦 Includes: (1) RC10B84 Rear Shock Tower 🔧 Compatibility: Team Associated RC10B84 💡 Pro Tip: Consider keeping an extra shock tower on hand — they’re a common part to break in hard landings, and a quick swap can save your race day.  

Read more less

🔧 Precision Steering Control – Keep your B84’s front end dialed with the Factory Team Front Hubs. Designed for durability and tuning flexibility, these hubs ensure consistent steering response and smooth suspension geometry under race conditions. ⚙️ Features:✅ Precision-molded for a perfect fit on the B84 platform✅ Multiple camber link mounting holes for fine-tuned steering feel✅ Durable construction for long-lasting performance✅ Factory Team quality parts for competitive-level racing 📦 Includes: (1) Left Front Hub (1) Right Front Hub 🔧 Compatibility: Team Associated RC10B84 💡 Pro Tip: Use the inner camber link holes for more aggressive steering on tight tracks, and the outer holes for smoother, more stable cornering.

Read more less

🏁 Stronger, Smarter Suspension – Keep your RC10B84 handling sharp with the Factory Team Rear Hubs. Designed for precision and durability, these hubs maintain wheel alignment under load while giving you the tuning options needed to adapt to any track. ⚙️ Features:✅ Precision-molded for a perfect factory fit✅ Multiple camber link mounting options for quick tuning✅ Strong, durable construction built for competitive racing✅ Factory Team grade components for long-lasting reliability 📦 Includes: (1) Left Rear Hub (1) Right Rear Hub 🔧 Compatibility: Team Associated RC10B84 💡 Pro Tip: Experiment with upper camber link positions on the hubs — lower holes increase traction, while higher ones improve stability on high-grip tracks.

Read more less