Upgrade your XRAY XB2 2025 with the world-championship-winning performance of the JConcepts S15. Originally debuted at the IFMAR World Championships, the S15 blends elements from the iconic Punisher, Finnisher, and Silencer lines to deliver razor-sharp handling, superior airflow balance, and a modern, aggressive look suited for today's high-grip tracks. This body offers a precise chassis-hugging fit, ample space for sponsor logos, and tuning flexibility with two included wings for carpet, turf, or dirt racing. Refined S15 Aerodynamics The S15 is engineered for efficiency and stability across demanding race conditions. Its centered cockpit, chamfered side pods, and aerodynamic window shaping help direct airflow cleanly over the buggy. A centerline fin enhances tracking accuracy, while the rear spoiler profile boosts downforce for improved cornering grip. A trimmable rear section allows heat escape from electronics, making this body both functional and competition-ready. Key Features Championship-proven S15 aero package Designed specifically for the XRAY XB2 2025 Optimized deflection angles for balanced airflow Chamfered side pods for signature JConcepts styling Centerline roof fin for increased straight-line stability Rear spoiler extension increases downforce Rear trimming area helps release heat Molded in clear polycarbonate with overspray protection Includes (1) JConcepts XRAY XB2 2025 S15 Clear Body (2) JConcepts Turf/Carpet/Dirt Wings (1) Decal Sheet (1) Window Masking Sheet Note Body ships clear and unpainted Painted body shown for illustration only

Read more less

Dial in elite front-end grip and laser-precise steering with the JConcepts 3DP 2.2" 2WD Front Carpet Tires — engineered for maximum consistency, control, and performance on today’s high-traction carpet tracks. Developed from the winning heritage of the Fuzz Bite and 3D series, the 3DP fronts bring a refined pin layout, low-profile carcass, and enhanced sidewall support to give racers the steering feel they need without sacrificing stability. Revolutionary Carpet Steering Precision The 3DP front tires are built around a super-stacked micro pin layout that delivers incredible forward bite and immediate steering response.The tread uses: Reverse “water tower” micro pins for improved bite Radial ribs & directional sidewall lugs for balanced steering Low-profile carcass to keep the buggy flat and predictable This combination gives drivers the confidence to push harder through corner entry, mid-corner, and exit. Engineered for Consistency & Performance Sliced outer traction bars add flexibility and smoothness on fast transitions, while the open outer pin spacing helps shed carpet fuzz and maintain crisp traction over long race days. Scalloped beads reduce rotating mass for quicker acceleration and enhanced steering feel — and mounting is seamless on standard 2.2” JConcepts wheels. Features Low-profile carcass for precision steering and stability Super-stacked micro pin layout for maximum grip Reverse “water tower” pins enhance traction & tire life Cut & sliced outer bars improve flexibility in corners Open outer pin spacing reduces debris buildup Radial ribs and directional sidewall lugs for balanced handling Lightweight scalloped beads reduce rotating mass Designed to fit popular 2.2” JConcepts wheels Includes (2) JConcepts 3DP 2.2" 2WD Front Buggy Carpet Tires (Pink) (2) Foam Inserts

Read more less

Unleash pro-level traction on high-grip carpet with the JConcepts 3DP 2.2" Rear Buggy Tires — engineered for racers who demand maximum grip, predictable feel, and long-lasting consistency on modern artificial surfaces. Building on the legendary lineage of the JConcepts 3D series, the 3DP introduces advanced tread geometry, a low-profile carcass, and optimized pin layout to deliver elite performance for competitive 1/10 off-road carpet racing. Next-Generation Carpet Control The 3DP combines: Dense center pins for maximum forward grip Reverse “water tower” micro pins (borrowed from the Fuzz Bite) for increased bite and reduced wear Cut and sliced outer traction bars that flex for smooth corner transitions Radial sidewall ribs for improved stability during high-speed direction changes Together, these features provide the perfect balance of steering predictability, driveability, and acceleration on EOS-style carpet tracks. Engineered for Speed & Consistency The low-profile carcass helps the buggy stay flatter through turns, giving you stability and faster corner rotation. Scalloped tire beads remove unnecessary weight, improving acceleration and reducing rotating mass. Open spacing on the outer pins helps the tire shed debris, extending the usable lifespan while keeping the tread sharp across long race days. Features JConcepts original 3DP performance design Low-profile carcass for stable, controlled handling Dense center pin layout for maximum bite Reverse "water tower" micro pins enhance grip and wear life Sliced outer bars add flexibility and cornering feel Radial ribs on the sidewall improve balance and predictability Openly spaced outer pins reduce debris buildup Scalloped tire beads reduce rotating weight Includes open-cell medium foam inserts Includes (2) JConcepts 3DP 2.2" Rear Buggy Carpet Tires (Pink Compound) (2) Open-Cell Medium Foam Inserts    

Read more less

The Yeah Racing 60-Core High Current Servo Extension Wire is built for RC enthusiasts who demand reliable power delivery and signal integrity over longer distances. Perfect for rock crawlers, touring cars, or scale builds with extended chassis layouts, this heavy-duty extension lead ensures stable performance even under high-load conditions. ⚙️ Features: Designed for RC vehicles with remote servo placement 60-core wire construction supports high current servos Compatible with JR and Futaba-style connectors Provides a clean, secure wiring solution for custom builds Durable, flexible insulation resists wear and heat 📏 Specifications: Length: 150mm Connector Type: JR/Futaba Plug Wire Type: 60-core high-current cable 📦 Includes: (1) Yeah Racing 150mm 60-Core High Current Servo Extension Wire    

Read more less

Take your steering precision to the next level with the XRAY Aluminum Steering Plate Set, designed specifically for the 1-piece chassis. Machined from premium Swiss 7075 T6 aluminum, this set ensures maximum strength, rigidity, and durability under the toughest racing conditions. Features: Swiss 7075 T6 aluminum construction for ultimate durability Black anodized finish with XRAY laser engraving Reinforces the steering system for consistent, precise handling Direct fit for XRAY’s 1-piece chassis design Perfect upgrade for racers demanding maximum performance Compatibility: XRAY XB2 (’21 onwards with 1-piece chassis) XRAY XT2 (’21 onwards with 1-piece chassis) Includes: (1) Aluminum Steering Plate Set

Read more less

Upgrade or replace your buggy’s shocks with this set of Team Losi Racing 13mm Composite Shock Caps, built specifically for the 22X platform. Designed for precision fit and durability, these shock caps help keep your suspension smooth and race-ready. 🛠️ Features: Durable composite construction Direct fit replacement for 13mm shocks Lightweight design to maintain performance 📦 Includes: (2) 13mm Composite Shock Caps ✅ Compatibility:• Losi 22X• Losi 22X-T

Read more less

Fine-tune your front-end geometry with this Spindle Trail Insert Set from Team Losi Racing. Designed for precision handling adjustments, this set includes four of each: 2mm, 3mm, and 4mm inserts—perfect for dialing in the feel you want on the track. ✅ Includes:• (4) 2mm Inserts• (4) 3mm Inserts• (4) 4mm Inserts Compatible with select TLR 22-series models. A must-have for racers chasing the perfect setup!

Read more less

Team Associated 13mm Shock Spring Cup Set [91966] 🌀 Fine-Tune Your Ride Height in Seconds! Dial in your suspension setup with this 13mm Shock Spring Cup Set from Team Associated. Whether you're going low or keeping it high, this kit includes 0mm, 5mm, and 9mm cups—giving you full control over ride height and spring preload. 🛠️ ✅ Fits 13mm shocks✅ Includes 0mm, 5mm, and 9mm cups✅ Perfect for on-the-fly tuning✅ Durable and precision-molded Includes:(4) 0mm Spring Cups(4) 5mm Spring Cups(4) 9mm Spring Cups 📦 Part Number: 91966🚗 Brand: Team Associated

Read more less

Team Associated RC10B7 HD CVA Bone (2) (69mm) [92454] 💥 Heavy Duty for Heavy HitsBuilt to handle the heat of hardcore racing, these 69mm HD CVA Bones are the perfect upgrade or replacement for your RC10B7 or B7D. Designed for durability and smooth power transfer, they’ll keep your buggy ripping lap after lap. 🔧 Upgrade Highlights:✅ Heavy-duty design for increased strength and longevity⚙️ 69mm length—direct fit for RC10B7/B7D🛠️ Precision-machined for consistent performance 📦 Includes:(2) 69mm HD CVA Bones 🔩 Part Number: 92454🚗 Compatible With: Team Associated RC10B7 Team Associated RC10B7D

Read more less

1up Racing Pro-RX FH5 2.4GHz Receiver – Elite Sanwa Compatibility Without the Cost 💥 Take your control to the next level with the 1up Racing Pro-RX FH5 — a precision-engineered 2.4GHz receiver that delivers elite-level responsiveness and reliability at a price that leaves the competition in the dust. 🏁 Designed to work seamlessly with Sanwa FH5 & FH5U protocols, this compact, antenna-free unit is a favorite among our 1up Factory Drivers. Rigorously tested for top-tier performance, the Pro-RX FH5 brings premium features to your pit table — without the premium price. ✨ Key Features: 🔗 FH5 & FH5U Protocol Compatible – Drop-in ready for your Sanwa M17, MT-5, or MT-R📡 4 Channels – Versatile setup options for steering, throttle, and more⚡ Lightweight & Compact – Only 6.8g, perfect for race builds where every gram counts🔋 Wide Voltage Range – Operates from 3.5V to 8.4V🧰 No Tools Needed – Plug-and-play with included bind plug and protective foam case🚫 Antenna-Free – Clean look and easy install (note: reduced range vs. external antenna units) 📦 What’s in the Box? ✔️ (1) 1up Racing Pro-RX FH5 Receiver✔️ (1) Instruction Manual✔️ (1) Foam-Lined Storage Case✔️ (1) Bind Plug 🔧 Specifications: Compatibility: Sanwa FH5 / FH5U (M17, MT-5, MT-R) Channels: 4 Voltage Input: 3.5–8.4V Dimensions: 28 x 20.5 x 18.5mm Weight: 6.8g 📌 Tech Note: While compact and antenna-free for convenience, this receiver has shorter range than traditional receivers with external antennas. For extended range applications, we recommend the standard Pro-RX model. 🏆 Sanwa-Ready, Race Proven When milliseconds matter, trust the receiver that racers rely on. Get elite FH5 performance without breaking the bank. 💡 Upgrade Smarter – Run the 1up Pro-RX FH5 Today!

Read more less

Pro-Motion 2.2" 2WD Front Slim Carpet Buggy Wheels (4)Available in Yellow (3080-Y) or White (3070-W) Precision on the Carpet. Built for Grip. Dial in your buggy for high-traction carpet tracks with Pro-Motion’s 2.2" Slim Front Wheels. These lightweight wheels are engineered with a reinforced inner rib design to reduce flex without adding unnecessary weight. The tough plastic construction holds up under pressure, while integrated vent holes keep performance sharp through long mains. ✅ Perfect fit for 2WD front carpet setups✅ Slim profile design tailored for high-grip surfaces✅ Ultra-lightweight ribbed structure for strength without bulk✅ Built-in vent holes reduce tire ballooning✅ Available in bright Fluorescent Yellow or Clean White✅ Includes 12mm hex mounting 📦 Includes:(4) 2.2" Slim Front Carpet Buggy Wheels (choose Yellow or White) 💡 Pro Tip: Pair with low-profile carpet tires for the ultimate precision and responsiveness on tight indoor layouts.

Read more less

Team Associated 7.8x3.5x1.0mm Aluminum Hub Spacer Washers – Blue (10) – Part 31388Dial In Wheelbase. Precision You Can Stack. The Team Associated 7.8x3.5x1.0mm Blue Aluminum Hub Spacer Washers (31388) are a smart tuning tool for adjusting wheelbase and hub spacing on RC8B3, RC8T3, and any 1/8 vehicle using 3.5mm hinge pins. These durable, lightweight aluminum spacers help you fine-tune geometry for track conditions or personal preference. ✅ Size: 7.8mm OD x 3.5mm ID x 1.0mm thick✅ CNC-machined blue anodized aluminum – race-grade durability✅ Used for hub spacing and wheelbase tuning✅ Fits RC8B3, RC8T3, and any vehicle with 3.5mm hinge pins✅ Perfect for stacking with .5mm or 2.0mm spacers (sold separately) 📦 Includes: (10) 7.8x3.5x1.0mm Blue Aluminum Hub Spacer Washers Part #: 31388 💡 Pro Tip: Fine-tuning wheelbase can impact rear grip, stability, and overall cornering behavior—stack accordingly for your surface.  

Read more less

Team Associated Aluminum Motor Mount – RC10B7 Precision Fit. Proven Durability. Upgrade your RC10B7 or B7D with this genuine Team Associated Aluminum Motor Mount, engineered for a secure motor install and optimal gear mesh. Made from high-quality aluminum, it offers improved strength and heat dissipation—perfect for high-performance builds. 🛠️ Features: CNC-machined aluminum construction Increased durability over stock components Optimized for heat dissipation and motor alignment Official Team Associated replacement part 📦 Includes: (1) Aluminum Motor Mount ✅ Compatibility: Team Associated RC10B7 Team Associated RC10B7D ⚙️ Trust Team Associated parts to deliver race-ready performance with every install.

Read more less

Team Associated Differential Outdrive Shims (14pc) – RC10 B74 Precise Tuning for Your 4WD Drivetrain Optimize the fit and function of your RC10 B74 drivetrain with this Team Associated Differential Outdrive Shim Set. Designed as direct replacements for the kit-supplied parts, these precision shims allow you to fine-tune outdrive spacing and reduce slop for smoother, more efficient drivetrain performance. 🔧 Features: 🔩 Precision Tuning Parts – Designed to eliminate excess play in differential outdrives ⚙️ Direct Replacement – Ideal for use with the RC10 B74 1/10 4WD Buggy 🧷 Multiple Thicknesses – Mix and match to achieve perfect spacing 📦 Includes: (10) 0.1mm Outdrive Shims(4) 0.25mm Outdrive Shims COMPATIBILITY: Team Associated RC10 B74 OriginalTeam Associated RC10 B74.1Team Associated RC10 B74.1DTeam Associated RC10 B74.2Team Associated RC10 B74.2D

Read more less

1up Racing UltraLite 3 Wire Organizer – Clean Wiring, Zero Compromise ⚡ Tidy up your electronics like a pro with the 1up Racing UltraLite 3 Wire Organizer — the perfect blend of style and performance for your wiring setup. Whether you're refreshing your race rig or building from scratch, this lightweight aluminum organizer delivers a clean look without the bulk. 💨 At just 0.59g, it’s engineered to keep things neat without adding drag or weight, making it ideal for serious racers who care about every gram. ✨ Key Features: 🎯 Fits 12–14 AWG Wires – Compatible with wire diameters up to 4.1mm OD🪶 Featherweight Design – Weighs only 0.59g to keep your ride light and fast💎 Anodized Aluminum Finish – Durable, sleek, and track-ready🔌 Organized & Secure – Prevents tangled wires and boosts air circulation📐 Ultra-Clean Aesthetic – Show-quality wiring made easy 📦 What’s in the Box? ✔️ (1) UltraLite 3 Wire Organizer (Anodized Aluminum)

Read more less

JConcepts F2 Lightweight Body for XRAY XB2 2024 – Includes Two 6.5" Wings🏁 Lighten Up and Stay Fast – Proven Aero for High-Grip Racing The JConcepts F2 lightweight body for the XRAY XB2 2024 is built for serious racers looking to reduce weight and gain responsiveness on high-bite surfaces like turf, carpet, and polished clay. Based on the same winning layout as the standard F2, this lightweight version trims the fat while keeping all the performance you expect from a JConcepts shell. Featuring the signature forward cab bias, dual rear windows, and Finnisher "V" side-pod design, the F2 body offers maximum downforce, clean airflow, and high-speed stability. The slim profile hugs the XB2 2024 chassis perfectly, with built-in clearance for spur gear guards and space for electronics and wiring. ✨ Key Features: Direct fit for the XRAY XB2 2024 platform Clear lightweight polycarbonate for reduced weight and snappier handling Original JConcepts F2 profile with aggressive styling and aero balance Dual step side-pods and cab-forward layout for optimal steering response Includes (2) 6.5" Carpet | Turf | Dirt Wings Spur gear guard clearance molded into the body Comes with window masks and full decal sheet 📦 Includes: (1) F2 Clear Lightweight Body for XRAY XB2 2024 (2) 6.5" Wings (1) Window Mask Sheet (1) JConcepts Decal Sheet ⚠️ Note: Painted body shown for illustrative purposes only. Product ships clear and untrimmed. Compatibility: XRAY XB2 2024 Carpet XRAY XB2 2024 Dirt

Read more less

JConcepts XRAY XB2 2024 "S15" Lightweight Clear Buggy Body w/Two Wings Premium Lightweight Option for Maximum Performance Dominate the track with the lightweight version of the JConcepts "S15" Buggy Body, precision-molded for the XRAY XB2 2024 Carpet and Dirt platforms. This body features the same aerodynamic enhancements and aggressive styling as the standard S15 — now in a thinner polycarbonate for reduced weight and sharper handling. Mid-body winglets, a cockpit shark fin, and a raised rear profile give your buggy the downforce, stability, and fitment needed to perform at its peak. Ideal for racers chasing every last tenth of a second, the lightweight S15 is a go-to choice for competitive events where agility and response matter most. ✨ Features: 💨 Lightweight Polycarbonate Construction – Reduces overall weight for quicker response and better rotation 🧭 Forward Cab Bias – Enhances steering feel and directional control 🛡️ Mid-Body Winglets & Stabilizer Kick-Up – Adds side bite and rear grip 🦈 Cockpit Shark Fin – Improves high-speed stability and structural integrity 🧰 Raised Rear Side-Pods – Fits tall shorty packs or saddle pack layout ✂️ Includes Window Mask & Decal Sheet 📦 Includes: ✔ (1) Lightweight Clear S15 Body for XRAY XB2 2024✔ (2) Rear Wings✔ (1) Window Mask Sheet✔ (1) JConcepts Decal Sheet ✅ Compatibility: XRAY XB2 2024 Carpet Edition XRAY XB2 2024 Dirt Edition 🖌️ Note: Body comes clear and unpainted. Painted image is for reference only.

Read more less

🏁🔧 Genuine Team Associated Replacement CVA Bones The Team Associated CVA Bone Set is a replacement drivetrain component designed to restore smooth and reliable power transfer in compatible Team Associated vehicles. Manufactured to Team Associated specifications, these CVA bones provide dependable performance and precise fitment for your drivetrain assembly. Ideal for routine maintenance, repairs, or keeping spares in your pit box. 🔧 Features ✔ Genuine Team Associated replacement part✔ Precision-manufactured for proper fit and function✔ Durable drivetrain component✔ Helps maintain smooth power transfer✔ Direct replacement for worn or damaged CVA bones✔ Sold as a pair 📦 Includes (2) CVA Bones 💡 Recommended Maintenance Team Associated recommends replacing the: CVA Barrel CVA Pin (ASC91438) when installing new CVA bones to ensure optimal drivetrain performance and longevity. 💡 Perfect For ✔ Routine maintenance✔ Drivetrain rebuilds✔ Race-day spare parts✔ Replacing worn CVA components✔ Maintaining smooth drivetrain operation ⚠️ Notes Verify compatibility with your vehicle before installation CVA barrel and pin sold separately (ASC91438)  

Read more less

Restore precise front suspension performance with the Team Associated RC10B7.1 Factory Team Front Shock Tower (-2mm) (92581). Designed for the B7.1 buggy platform, this tower maintains accurate shock mounting geometry and consistent front-end handling during racing and practice. The -2mm lowered design helps reduce the center of gravity, improving stability and responsiveness on high-traction surfaces such as carpet and groomed dirt tracks. Built with Factory Team precision, this component ensures dependable durability and consistent suspension performance for competitive racing. Engineered specifically for the Team Associated B7.1, it installs easily as a direct replacement to keep your buggy performing at its best. Features• -2mm lowered shock tower design for improved stability• Maintains accurate front suspension geometry• Supports consistent steering response and handling• Factory Team precision engineering for race performance• Direct replacement for the RC10B7.1 / B7.1 buggy platform Includes• (1) RC10B7.1 Factory Team Front Shock Tower (-2mm)      

Read more less

Keep your suspension mounts protected and looking race-ready with the Team Associated RC10B7.1 Shock Tower Covers Set (92580). Designed specifically for the B7.1 buggy platform, these covers help shield the shock tower mounting areas from wear, impacts, and track debris during racing and practice. Perfect for routine maintenance or race-day prep, these covers maintain a clean, finished look while helping preserve the integrity of the suspension mounting points. A simple replacement that helps keep your Team Associated B7.1 performing consistently. Features• Genuine Team Associated replacement parts• Helps protect shock tower mounting areas from wear and debris• Maintains a clean, finished factory look• Ideal for maintenance, rebuilds, or race prep• Designed for the RC10B7.1 / B7.1 buggy platform Includes• (1) RC10B7.1 Shock Tower Covers Set    

Read more less

Keep your suspension and steering linkages operating smoothly with the Team Associated RC10B7.1 Rod Ends Set (92579). Designed as a replacement set for the B7.1 buggy platform, these rod ends help maintain precise steering response and consistent suspension articulation. Rod ends are critical wear components in any race buggy. Replacing them regularly helps ensure smooth linkage movement, accurate adjustments, and reliable handling during practice and race conditions. This set is ideal for routine maintenance, rebuilds, or keeping spares in your pit box. Engineered specifically for the Team Associated B7.1, these rod ends provide a precise fit and dependable performance for competitive racing. Features• Genuine Team Associated replacement parts• Maintains smooth steering and suspension linkage movement• Supports precise suspension and steering adjustments• Ideal for maintenance, rebuilds, or race-day prep• Designed for the RC10B7.1 / B7.1 buggy platform Includes• (1) RC10B7.1 Rod Ends Set      

Read more less

The Team Associated B7.1 Caster & Steering Blocks Set (92576) is a replacement set designed to restore precise steering performance and front suspension geometry on the RC10B7.1 platform. Perfect for maintenance, rebuilds, or race prep, this set ensures your buggy maintains accurate handling and consistent performance on the track. With multiple steering block options included, racers can fine-tune kingpin inclination (KPI) and steering characteristics to match track conditions and driving preferences. Features• Genuine Team Associated replacement parts• Restores precise steering and suspension performance• Multiple KPI steering block options for tuning• Helps maintain consistent handling and control• Designed specifically for the B7.1 platform Includes• (2) Caster Blocks• (2) 4L/R Steering Blocks (KPI0)• (2) 4L/R Steering Blocks (KPI2)• (2) 3L/R Steering Blocks (KPI0)• (2) 3L/R Steering Blocks (KPI2)    

Read more less

⚠️ Notice: Expected in stock May 14th. Use the “Notify Me” option to be alerted when available. The Avid 22X Ringer Titanium Turnbuckle Set marks Avid’s first entry into the turnbuckle market — and they didn’t hold back. Featuring a deep shiny black finish with bright silver Ringer grooves and directional A-Arrows, these turnbuckles are built to stand out while delivering serious race performance. The trademark round Ringer design reflects more light than traditional flat-cut turnbuckles, giving your build a unique look that literally outshines the rest. 🔧 Built for Performance Machined from billet 6Al-4V titanium with cold-rolled threads, these 3.5mm turnbuckles are engineered for strength, precision, and long-term durability. Avid also machined their logo and directional arrows directly into the body — no laser etching to wear off over time. The bold 4mm adjustment center provides easy wrench access for fast, precise tuning at the track. 🛡 Replacement Guarantee These carry Avid’s well-known replacement guarantee if they bend or break. After over a year of testing, no failures have been reported on these 3.5mm versions. ✨ Features Machined from billet 6Al-4V titanium Cold-rolled threads for strength Shiny black finish (4) Bright silver Ringer grooves (4) Machined silver A-Arrows (directional tightening indicator) Machined logo on all four sides 4mm adjustment center for easy tuning ✅ Fits TLR 22X AC TLR 22X DC Precision. Strength. Style.Turnbuckles that perform as good as they look. 🏁

Read more less

The Team Associated 3-Gear Gearbox Set is a genuine replacement assembly designed for the RC10B7, RC10T7, and RC10SC7 platforms. Built to factory specifications, this gearbox set ensures proper drivetrain alignment, durability, and smooth power delivery. Whether you're rebuilding after heavy track use or replacing damaged components, this 3-gear configuration maintains the performance and reliability expected from Team Associated race platforms. Features Genuine Team Associated replacement part 3-gear gearbox configuration Factory-fit for proper alignment and durability Maintains smooth and efficient power transfer Includes (1) 3-Gear Gearbox Set Compatibility Team Associated RC10B7 Team Associated RC10T7 Team Associated RC10SC7 A reliable drivetrain replacement to keep your buggy or truck performing at its best. 🏁    

Read more less

Step up your pit setup with the Sticky Kicks RC Works Team Bottle. Built with a clean brushed aluminum finish and a true factory look, this bottle is perfect for oils, cleaners, or detail fluids at the track or in the shop. The included atomizer spray cap delivers smooth, controlled application while keeping your pit area looking professional and organized. Works Team Bottle Benefits Brushed aluminum construction Clean, factory-style appearance Atomizer spray cap for even, controlled spray Ideal for pit or workshop use A simple, dialed pit accessory that adds function and style to any race setup. 🏁  

Read more less

The Avid Triad Direct Drive for the Team Associated B7 is designed for stock racers looking to eliminate the slipper clutch and reduce rotating mass for maximum drivetrain efficiency. By removing the entire clutch assembly, you get direct power transfer with zero slip (other than the differential), resulting in sharper throttle response and a more connected feel on high-grip tracks. Weighing just 6.45g with a 72T spur installed (2.62g without spur), this is one of the lightest direct drive systems available. 🔥 Why Run Direct Drive? Some stock racers prefer direct drive for: Reduced rotating mass Immediate throttle response Consistent power delivery Simplified drivetrain setup It’s not for every track or driver, but in the right conditions it can offer a competitive edge. ⚙️ Features Eliminates full slipper clutch assembly Ultra-lightweight design (6.45g w/ 72T spur) All-aluminum construction Custom M3x48 aluminum topshaft screw Clean, secure install Easy conversion back to slipper setup No loose slipper screws to maintain Works with Avid Triad spur gears 📦 Includes (1) Direct Drive Aluminum Plate (1) 69T Triad Spur (1) 72T Triad Spur (1) M3x48 Aluminum Screw (1) Aluminum Hat Bushing (1) Aluminum Cone Washer (1) M3 Ringer Aluminum Nut Note: Works with Avid Triad spur gears (spur not included unless specified in package). 🛠 Installation Use B6.1 Triad Direct Drive assembly instructions (installation is the same for the B7). ✅ Compatibility Team Associated B7 For racers chasing maximum efficiency and minimal rotating mass, the Triad Direct Drive keeps things light, simple, and race-focused. 🏁  

Read more less

Restore smooth, consistent shock performance with the Team Losi Racing G3 TiNi Shock Shaft, designed for precision damping and long-lasting durability. Featuring a 3mm diameter and 48.7mm length, this shaft uses a TiNi coating to reduce friction and wear for smoother shock action and extended service life. Ideal for rebuilds or routine maintenance, this shock shaft helps maintain consistent suspension performance under demanding race conditions. Features: G3 TiNi-coated shock shaft 3mm diameter x 48.7mm length Reduced friction for smoother shock operation Increased wear resistance and durability Precision-machined for consistent performance Includes: (1) Shock Shaft Part Number: TLR-1129

Read more less

Maintain proper shock mounting geometry and smooth suspension movement with the Team Losi Racing Shock Standoff Arm Set. Designed specifically for the TLR 22X platform, these standoffs mount at the suspension arms and provide a precise, secure attachment point for the shocks. Ideal for replacement during maintenance or rebuilds, these components help ensure consistent suspension performance and reliable fit on race day. Features: Precision-fit shock standoffs for suspension arms Maintains correct shock mounting geometry Durable construction for racing use Direct replacement components Compatibility: Team Losi Racing 22X Includes: (2) Shock Standoffs (Arm) Part Number: TLR-1179  

Read more less

Refine front-end suspension performance with the Vision Racing (VR) -2mm Carbon Front Shock Tower V2 for the TLR 22X. Precision-cut from 4mm carbon fiber, this tower lowers the front shock mounting position by 2mm to help fine-tune handling, steering response, and overall consistency on high-grip or technical tracks. Designed to accept the stock front tower guard, the V2 version adds micro-tune shock positioning for precise setup adjustments. Additional webbing increases rigidity and strength, while the chamfered edges provide durability and a clean, professional finish. Features & Benefits: -2mm front shock height for optimized suspension geometry 4mm carbon fiber construction for strength and stiffness Accepts stock front tower guard Micro-tune shock positioning for precise setup changes Added webbing for extra strength Chamfered edges for durability and a premium look Compatibility: TLR 22X Includes: (1) Vision Racing TLR 22X -2mm Carbon Front Shock Tower V2 (4mm) A precision performance upgrade for racers looking to sharpen front-end feel and dialing capability on the TLR 22X platform.    

Read more less

Pivot Weight Overview:Dial in precise front-end balance with the Team Losi Racing 22X Brass Pivot Weight. This 5-gram tuning weight adds mass exactly where it matters most, helping improve stability, cornering consistency, and overall handling performance on the track. 🏁 About the Brass Pivot Weight Designed for racers who demand fine-tuned control, this brass pivot weight installs directly into any front pivot location. The added low-mounted mass lowers the center of gravity and enhances front-end weight distribution, resulting in improved steering response and chassis stability. It’s a simple, effective upgrade for dialing in your setup for changing track conditions. 🔧 Key Features Heavy brass construction Adds 5 grams of precisely placed weight Fits any front pivot location Lowers center of gravity Improves front-end balance and stability Enhances cornering consistency Quick and easy installation Ideal for fine-tuning race setups 📦 Includes (1) Brass Pivot Weight (5g) A must-have tuning option for competitive 22X racers looking to extract maximum performance through precise weight balance adjustments.  

Read more less

Upgrade your rear suspension with the Factory Team Aluminum Rear Hubs from Team Associated, designed for racers who demand precision, durability, and consistent handling. These CNC-machined aluminum hubs replace the standard plastic parts to deliver improved strength, better bearing support, and a true Factory Team look. About the Aluminum Rear Hubs Race-Focused Performance & GeometryThe -4mm offset fine-tunes rear track width to optimize suspension geometry, improving stability and cornering response—especially on high-grip or technical tracks. Precision machining ensures a direct, stress-free fit, while the anodized finish provides long-lasting wear resistance and a professional race aesthetic. Features CNC-machined aluminum construction Factory Team anodized finish -4mm offset for optimized rear geometry Improved bearing support and consistency Increased durability for competitive racing Includes (1) Left Rear Hub (1) Right Rear Hub (4) Set Screws Compatibility Team Associated RC10 B7 / B7D Team Associated RC10 B84 / B84D Team Associated RC10 SC7 Team Associated RC10 T7 Perfect for racers looking to sharpen rear-end feel, increase reliability, and add Factory Team style to their setup.  

Read more less

The Team Losi Racing TLR234132 V2 Adjustable Pivot Insert Set is a replacement and tuning solution for select 22-series and TEN platforms. This updated V2 insert set allows precise adjustment of suspension pivot geometry, giving racers greater control over handling characteristics across a wide range of track conditions. Ideal for maintenance, rebuilds, or expanding setup options on compatible Elite platforms. 🔧 Features Genuine Team Losi Racing replacement and tuning parts V2 adjustable pivot inserts for advanced suspension tuning Enables precise adjustment of pivot geometry Ideal for setup changes, rebuilds, or race-day tuning Direct fit for compatible Losi platforms 📦 Includes (28) Individual Pivot Inserts ✅ Compatibility Losi 22 5.0 Elite Losi 22X Losi 22X-4 Losi 22X-4 Elite Losi 22X-T Losi TEN-SCTE 3.0

Read more less

The Team Losi Racing TLR334076 VHA Hinge Pin Insert Set is an optional tuning pack designed for the 22 5.0 and select 22-series platforms. These inserts allow racers to fine-tune rear suspension geometry by adjusting hinge pin and axle height positions within the VHA system. Ideal for dialing in handling characteristics across different track conditions, this set is a must-have for racers running Variable Height Axle configurations. 🔧 Features Genuine Team Losi Racing option parts Designed for VHA (Variable Height Axle) tuning Allows precise rear suspension geometry adjustments Ideal for setup changes on varying track conditions Direct fit for compatible 22-series platforms 📦 Includes (6) VHA Hinge Pin Inserts ✅ Compatibility Losi 22 5.0 AC Losi 22 5.0 DC Losi 22 5.0 Elite Losi 22 5.0 SR Losi 22X Losi 22X-4 Losi 22X-4 Elite Losi 22X-T Losi TEN-SCTE 3.0

Read more less

Get fast, accurate temperature readings anywhere in your RC setup with the EcoPower Digital Infrared Temp Gauge — a lightweight, compact, non-contact tool designed specifically for RC motors, ESCs, nitro engines, batteries, chargers, and even track surfaces. Just aim, press, and read. Simple, precise, essential. Why Every RC Driver Needs This Gauge Monitoring temps is one of the easiest ways to protect your investment and improve performance. Electric Motors: Prevent demagnetization, wiring damage, and sensor failure — keep temps under ~170°F. ESCs: Avoid capacitor failure or internal board damage. Nitro Engines: Tune with confidence. Most engines like 230–270°F — anything over 290°F risks serious damage. Track Surface: Choose the right tire compound for the conditions. A temp gauge is one of the most important tools any RC racer, crawler, nitro driver, or basher can own. Features: Fast, accurate non-contact temperature readings Measures in °F or °C ±2°C precision for reliable tuning Built-in LED flashlight Data hold function Battery level indicator Ultra-compact & lightweight Includes: (1) EcoPower Digital Infrared Temp Gauge (2) AAA Batteries Specifications: Display: 1.0 × 0.74 in (26.8 × 18.8mm) Temperature Range: –58° to 500°F (–50° to 260°C) Working Temp: –0° to 50°C (–32° to 122°F) Response Time: 0.5 sec Weight: 2.29 oz (65g) Dimensions: 3.64 × 1.77 × 1.16 in (92.5 × 45 × 29.5mm)

Read more less

Unleash extreme power and efficiency with the Gens Ace Redline 2.0 2S LiHV 8500mAh 140C Battery. Engineered for competitive RC racing, this pack combines massive capacity, ultra-low internal resistance, and a high 140C discharge rate to deliver stable voltage, explosive acceleration, and unmatched endurance. Perfect for racers who demand consistent performance through the entire run. 🔥 Key Features: High Voltage (LiHV) 7.6V output for maximum speed and power 140C continuous discharge for exceptional punch and consistency 8500mAh capacity delivers long runtime and balanced weight Factory-matched cells for uniform voltage, capacity, and resistance Low IR design ensures stable voltage under heavy load 5mm bullet connectors provide secure, low-loss connections Built using stable automatic stacking technology for reliability Lightweight and low-profile design for chassis balance and fit 📐 Specifications: Nominal Voltage: 7.6V (2S LiHV) Capacity: 8500mAh Continuous Discharge: 140C Charge Rate: 1C (8.5A max recommended) Configuration: 2S1P Watt Hours: 64.4Wh Battery Connector: 5mm Bullet Balance Connector: 2mm Bullet Dimensions (L×W×H): 139 × 47 × 25mm Weight: 10.65oz (302g) ✅ Compatibility: Ideal for 1/10 & 1/8 scale surface applications Perfect for Team Associated, XRAY, TLR, Yokomo, and Schumacher racing platforms Works with Touring Car (TC6/TC7 series), 4WD Buggies, Truggies, and Short Course Trucks requiring 2S packs 📦 Includes: (1) Gens Ace Redline 2.0 2S LiHV 8500mAh 140C Battery (1) Set of 5mm Bullet Connectors ⚠️ Important Safety Information: Always balance charge using a LiPo-compatible charger and LiPo safe bag. Never leave charging batteries unattended. Do not overcharge or discharge below 3.2V per cell. Allow batteries to cool completely before recharging. Follow proper break-in procedure for new packs (first 5 cycles at 50% discharge). 🏎️ Recommended For: 1/10 & 1/8 scale Buggy, Truggy, Touring Car, and Short Course Truck racing Ideal for spec and modified classes needing high voltage and long runtime

Read more less

Power your race machine with the Reedy Zappers HV SG6 Ultra Low Profile 2S LiPo Battery. Built for the demands of competitive RC, this pack delivers lightning-fast discharge, superior voltage retention, and rock-solid durability to keep you at peak performance lap after lap. ✅ Ultra Low Profile Design – Lowers center of gravity for sharper handling✅ 135C High Discharge Rating – Delivers extreme power output for racing applications✅ Flat Discharge Curve – Maintains consistent voltage through the entire run✅ State-of-the-Art Chemistry – Reduced internal resistance and improved cycle life✅ Meets Racing Standards – Built to ROAR, EFRA, BRCA, and IFMAR specifications Includes: (1) Zappers HV SG6 2S Ultra Low Profile 135C LiPo Battery (7.6V/6000mAh) 5mm Bullet Connectors Specifications: Nominal Voltage: 7.6V (2S HV LiPo) Capacity: 6000mAh Maximum Charge Rate: 2C (12A) Discharge Rate: 135C Peak Cell Configuration: 2S2P Watt Hours: 45.6Wh Connector: 5mm Bullet (battery), 2mm Bullet (balance) Dimensions (LxWxH): 139 x 47 x 19.5mm (5.47 x 1.85 x 0.77in) Weight: 247g (8.71oz) ROAR Approved: Yes ⚡ Take your racing to the next level with reliable power, ultra-low profile design, and championship-ready performance.

Read more less