🧵🔧 Clean Mounting. Strong Hold. Easy Access. The ProTek RC Body Mounting Hook & Loop Tape provides a simple, reliable solution for securing RC bodies and accessories. With a full 1-meter length, you can cut exactly what you need for a clean, custom setup. 🏁 About This Tape ✂️ Fully Customizable Supplied in a 1-meter length, this tape can be cut to fit any application—from body mounting to accessory placement. 🔒 Secure & Reliable Hold The hook and loop design keeps bodies and components firmly in place, even under demanding conditions. 🔄 Quick Removal Easily remove your body for maintenance or battery changes without dealing with clips or hardware. 🔧 Key Features ✔ 1-meter length for custom applications✔ Strong hook & loop fastening system✔ Secure hold for RC bodies and accessories✔ Allows quick and easy removal✔ Ideal for clean, clipless setups✔ Versatile for multiple RC uses 📦 Includes (1) Hook & Loop Tape (1 Meter Length) 🧰 Recommended Use Body mounting (clipless setups) Securing electronics or accessories Custom RC builds and modifications    

Read more less

Keep your drivetrain running smooth and protected with R1WURKS Black WS2 Grease. Specially formulated for high-performance RC applications, this grease is ideal for universal joints, dogbones, drive cups, and other high-load drivetrain components where reduced friction and long-lasting lubrication are critical. Infused with WS2 (Tungsten Disulfide) particles, this grease provides exceptional lubrication under extreme pressure while maintaining smooth performance even at elevated temperatures. ⚙️ High-Performance Drivetrain Lubrication The WS2 formula offers an extremely low coefficient of friction, helping drivetrain components operate more efficiently while reducing wear. With an impressive 300,000 PSI load-bearing capacity, it is designed to handle the heavy loads and impacts commonly experienced in RC racing and bashing. 🔧 Built for Extreme Conditions R1WURKS Black WS2 Grease is engineered to remain stable even in harsh environments. Its high dropping point allows it to stay fluid at high temperatures, preventing the grease from breaking down or solidifying during demanding runs. It also provides strong resistance against water, rust, and humidity, helping protect components from corrosion and long-term wear. ⚡ Features Designed for RC drivetrain components Ideal for dogbones, drive cups, and universal joints WS2 (Tungsten Disulfide) lubrication technology Extremely low coefficient of friction 300,000 PSI load-bearing capacity Excellent resistance to water, rust, and humidity High-temperature stability Resists abrasion and extreme pressure 📦 Includes (1) 3g Tube of R1WURKS Black WS2 Grease A must-have maintenance product for racers and builders looking to reduce drivetrain friction, protect components, and maintain peak performance.  

Read more less

The Team Associated 2.2" Front Buggy Wheels (White) are optional replacement wheels designed for 1/10 scale buggies using a 12mm hex setup. Built from durable nylon material, these wheels provide a strong yet lightweight solution for competitive racing. Designed for use with the Associated B4 and B4.1 when equipped with a 12mm hex conversion, these wheels offer reliable fitment and consistent performance on a variety of track surfaces. Features Genuine Team Associated optional wheels 2.2" front buggy wheel design 12mm hex fitment Durable white nylon construction Lightweight and race-ready Includes (2) 2.2" Front Buggy Wheels (White) Compatibility Team Associated B4 (with 12mm hex conversion) Team Associated B4.1 (with 12mm hex conversion) A dependable front wheel option built for strength, consistency, and competitive performance. 🏁  

Read more less

Protect your chassis and keep it looking factory fresh with the Team Losi Racing 22X Pre-Cut Chassis Protective Sheet. Designed specifically for the 22X platform, this peel-and-stick protector helps guard against scratches, scuffs, and wear from racing and practice—especially on abrasive track surfaces. Features & Benefits: Precision cut for a perfect fit on the TLR 22X chassis Durable surface protection against scrapes and wear Helps preserve chassis appearance and long-term performance Clean, professional look with official TLR branding Easy application that stays securely in place Includes: (1) 22X Pre-Cut Chassis Protective Sheet (Black) A simple upgrade that keeps your 22X protected and looking sharp race after race.  

Read more less

The Team Associated 92417 Rear Wing & Body Mounts Set is a direct replacement designed for the RC10B7 1/10-scale buggy platform. This set restores proper rear wing positioning and body mounting alignment, making it ideal for repairs, rebuilds, or keeping race-day spares on hand. Manufactured to factory specifications for precise fit and durability. 🔧 Features Genuine Team Associated replacement parts Direct-fit rear wing and body mounts Maintains proper wing height and body positioning Ideal for maintenance, rebuilds, or race prep 📦 Includes (1) Rear Wing Mount (2) Rear Body Mounts ✅ Compatibility Team Associated RC10 B7 (Original) Team Associated RC10 B7D

Read more less

  The Team Losi Racing TLR-1086 AC Narrow Steering Spindle Knuckles are direct replacement components for the 22X 2WD buggy platform. Designed to factory specifications, these knuckles restore proper steering geometry and front-end durability for race or maintenance applications. Ideal for repairs, rebuilds, or keeping spares on hand for race day. 🔧 Features Genuine Team Losi Racing replacement parts AC narrow steering spindle design Precision-molded for accurate fit and alignment Direct replacement for stock components 📦 Includes (2) Narrow Steering Spindle Knuckles ✅ Compatibility Losi 22X Losi 22X-T

Read more less

  Restore smooth drivetrain performance with the CVA Rebuild Kit from Team Associated. Designed to refresh your constant velocity driveshafts, this kit includes all the necessary components to bring worn CVAs back to peak condition—ensuring efficient power transfer and extended part life. 🔥 Key Features: Complete rebuild set for CVA driveshaft assemblies Helps restore smooth, efficient drivetrain operation Includes cross pins, barrels, and set screws Precision components built to factory specifications Ideal for regular maintenance or post-race refresh ✅ Compatibility: Compatible with a variety of Team Associated CVA-style driveshafts Commonly used in RC10B6, B6.1, B6.2, B6.3, and other AE 1/10 vehicles Check your vehicle’s manual for exact fitment 📦 Includes: (2) Cross Pins (2) Barrels (2) Set Screws ⚠️ Tip:Use thread lock on set screws and inspect parts regularly for wear to prevent drivetrain failure.

Read more less

Keep your suspension dialed in with these M3x48mm steel turnbuckles from Team Associated. Designed for strength and precision, they’re a direct replacement for worn or bent camber or steering links on a variety of Team Associated vehicles. 🔥 Key Features: High-strength steel construction for durability M3 thread with a 48mm (1.89") length Ideal for use in suspension and steering linkages Precision-machined threads for secure fit and adjustability Standard AE turnbuckle design for easy setup ✅ Compatibility: RC10B6 / B6.1 / B6.2 / B6.3 series (various locations) SC6.1 / T6.1 / T6.2 May also fit other models requiring M3x48mm turnbuckles — check your manual for fitment 📦 Includes: (2) M3 x 48mm Turnbuckles (1.89") ⚠️ Note:For proper installation, use a 3mm turnbuckle wrench and thread into ballcups evenly to maintain symmetry and alignment.

Read more less

Upgrade your RC10B6.3 front-end handling with these Factory Team Steering BlockArms. Featuring a +1mm height and made from lightweight carbon fiber, these HT (High Traction) arms are designed to optimize steering feel and response in high-grip conditions. A must-have for racers looking to fine-tune their setup for maximum performance. 🔥 Key Features: Genuine Team Associated Factory Team upgrade +1mm height for increased front roll center High traction (HT) geometry improves cornering in grippy conditions Constructed from precision-cut carbon fiber Lightweight and durable for competition use ✅ Compatibility: RC10B6.3 RC10B6.3D May fit other RC10B6-series vehicles with similar front-end geometry 📦 Includes: (1) Left Steering Block Arm (1) Right Steering Block Arm ⚠️ Note:Factory Team parts are intended for experienced builders and racers. Always check fitment before installation.

Read more less

Dial in your suspension for ultimate precision with the Factory Team 13mm Shock Pistons. The #91931 pistons feature two 1.5mm holes, offering maximum damping for high-traction surfaces and rough tracks where control is key. 📦 Includes: (2) FT 13mm Shock Pistons – 2x1.5mm hole configuration 2.5mm thickness ⚙️ Key Features: Compatible with 13mm Team Associated shock bodies CNC-precision molding ensures consistency Smaller hole size for slower rebound and increased pack Ideal for high-bite or rough surface tracks Tuning option for front or rear shocks on RC10B6.4, RC10B74.  

Read more less

Dial in your gearing with the XRAY Composite 3-Pad Slipper Clutch Spur Gears. Precision-molded from a special composite material, these spur gears deliver durability, smooth operation, and consistent performance. Available Tooth Counts (48 Pitch): 72T – Part #365872 75T – Part #365875 78T – Part #365878 81T – Part #365881 84T – Part #365884 Features: Lightweight yet durable composite construction Designed specifically for the XRAY 3-Pad Slipper Clutch System Provides smooth power transfer and quiet operation Wide range of sizes lets you fine-tune gearing for track conditions and motor setup Compatibility: XRAY XB2 (2WD Buggy) XRAY XT2 (2WD Stadium Truck) Other XRAY models using the 3-Pad Slipper Clutch System (check your manual)      

Read more less

💥 Smart, Simple, Powerful. Level up your charging game with the Gens Ace iMars S100 – a compact beast that delivers up to 10 amps of charging power with 100 watts of output, all packed into a sleek and portable design. Whether you're juicing up FPV drone packs, 1/10 & 1/8 scale race packs, or heli batteries, this charger does it all with ease. ✅ G-Tech Smart Compatible (and works with non-smart packs too)✅ Physical button interface – no more accidental swipes✅ AC 100–240V input – travel-friendly worldwide✅ Color display + clean UI – see everything at a glance✅ XT60 output + multiple adapter cables included✅ Super lightweight – only 260g! 🔧 Specs at a Glance:• Input Voltage: AC 100-240V• Output Voltage: 27V max• Charge Power: 100W / 10A max• Discharge Power: 5W• Cell Types: 2S–6S LiPo, LiFe, Li-ion, LiHV | 4S–18S NiMH• Output Connector: XT60• Size: 139.8 x 83 x 40mm• Weight: 260g 📦 In the Box:• iMars S100 Charger (Black or White)• AC Power Cable• XT60 to EC3 / EC5 / T-Plug Adapters• USB Cable 👉 Lightweight. Versatile. Ready to travel or race. The iMars S100 is the perfect smart upgrade for your pit bag.

Read more less

Boost your buggy’s performance with this high-quality Factory Team Carbon Composite Laydown Gearbox and Chassis Braces set! Designed for racers looking to increase chassis rigidity and reduce unwanted flex, this upgrade delivers improved consistency, sharper handling, and enhanced tuning potential on high-grip surfaces. ✅ Key Features: Factory Team carbon composite construction for added durability and reduced flex Improves overall chassis response and driving precision Ideal for high-grip tracks where consistency is key Direct fit for RC10B6 platform—easy bolt-on performance upgrade 📦 Includes: (1) Laydown Gearbox (Carbon Composite) (2) Chassis Braces (Carbon Composite) 🔧 Compatibility: Team Associated RC10B6 Also compatible with RC10B6.1, B6.2, B6.3, and similar laydown setups Take your tuning to the next level with Factory Team precision—perfect for racers chasing every tenth!

Read more less

Upgrade your drivetrain with this optional set of TLR 22X-4 68mm CVA Driveshaft Bones. Precision-engineered for the front/center position, these driveshafts deliver smoother power transfer, improved durability, and consistent performance lap after lap—perfect for serious racers looking for reliability and precision. 🔧 Features:✅ 68mm CVA driveshaft bones for front/center position✅ Designed for optimized durability and power delivery✅ Precision machined for smooth, consistent operation✅ Ideal for high-performance race setups 📦 Includes:• (2) 68mm CVA Driveshaft Bones 🚗 Compatibility:• Losi 22S Sprint• Losi 22X• Losi 22X-4• Losi 22X-4 Elite Dominate the track with smoother handling and added strength—this is a must-have upgrade for your Losi race platform!

Read more less

Overview:The JConcepts XRAY XB2 2025 “S2” 1/10 Buggy Body delivers pro-level performance and aerodynamic precision for the latest XB2 platform. Originally designed for world-champion competition, the S2 design has become a staple for racers running low-profile setups on dirt, carpet, or turf. Precision-molded from high-quality clear polycarbonate, the S2 body features an aggressive low-drag profile with refined airflow management and enhanced downforce for stable, responsive handling.Available in both Standard (0685) and Lightweight (0685L) versions to match your preferred balance of strength and agility. About the S2 Buggy Body Streamlined Style & PerformanceThe S2 body uses computer-aided design to achieve symmetry, precision, and consistent airflow. Its low-profile cab, recessed hood, and dual window design enhance cooling and responsiveness, while the integrated center fin improves high-speed stability. Sidepod scoops can be trimmed to tune downforce or airflow, and the body wraps snugly around the XRAY spur-gear guard for a perfect fit. Each kit includes two 6.5" wings, making it a versatile choice across all surface types. Features Aerodynamic low-profile shape reduces drag and boosts corner speed Dual-window cab and recessed hood for improved airflow and cooling Rear sidepod scoops for customizable downforce or airflow tuning Stabilizing center fin and reinforced side rails for durability Perfect fit around XRAY spur-gear guard Includes two 6.5” wings for multi-surface versatility Available in Standard and Lightweight options Includes (1) XRAY XB2 2025 “S2” 1/10 Buggy Body (choose Standard or Lightweight) (2) Wings (1) Decal Sheet (1) Window Masking Sheet Compatibility XRAY XB2 2025 Tech Note: Painted body shown in photos is for illustrative purposes only. The product you will receive is clear and unpainted.

Read more less

Team Losi Racing Upper Shock Bushing Set (4) – TLR5092 This is a genuine Team Losi Racing Upper Shock Bushing Set, designed for the TLR 22 1/10 buggy. These bushings provide a secure, smooth mounting point for your shock assembly and help reduce unwanted flex or wear during aggressive driving. ✅ Includes: 4 upper shock bushings✅ Fits: TLR 22 series✅ Genuine TLR performance parts Keep your suspension smooth and race-ready with factory-spec replacement bushings.

Read more less

Team Associated RC10B6.4 / B7 Steering Hat Bushing Set – ASC91974Upgrade or replace worn bushings with this genuine Team Associated Steering Hat Bushing Set. Originally designed for the RC10B6.4 and B6.4D, this set is also compatible with the RC10B7 series. Perfect for keeping your steering smooth and precise, this pack includes four bushings – just what you need to tighten up your front end feel. ✅ Fits: RC10B6.4 RC10B6.4D RC10B7 RC10B7D 📦 Includes: (4) Steering Hat Bushings OEM Part #: ASC91974

Read more less

Team Associated 13mm Front Shock Spring. These optional springs are intended for the Team Associated B6.4D and the B6.4. Package includes two springs. Effects of Shock Spring Changes  Shock Spring  Characteristic  Softer Increased Chassis Roll Increased Traction Better in Bumpy Conditions More Likely to Bottom Out  Stiffer Decreased Chassis Roll Decreased Traction Increased Responsiveness COMPATIBILITY: Team Associated RC10 B74.2Team Associated RC10 B74.2DTeam Associated RC10B6.4Team Associated RC10B6.4D

Read more less

Team Associated Rear Suspension Arms: RC10B74   ASC92130

Read more less

Team Associated RC10B7 Factory Team Carbon Side Rails. Constructed from AE legendary carbon composite material, these optional side rails are intended for the Team Associated RC10B7 1/10 buggy to stiffen the chassis and eliminate flex as a tuning option for high bite surfaces. Package includes two side rails. COMPATIBILITY: Team Associated RC10 B7 OriginalTeam Associated RC10 B7D

Read more less

Pro-Motion Viper 2.2" Slim 2WD Front LP Carpet Buggy Tires (2) — C4 Red (Soft Compound)Part #: 3070-C4 Precision Steering. Peak Grip. Podium Ready. The Pro-Motion Viper Slim 2WD Front Tire is engineered for high-bite indoor tracks, delivering precise steering response with its low-profile carcass and directional tread. The soft C4 Red compound gives you the edge in low-grip or cooler track conditions, while the tapered mini pin layout and dual outer wedges help maintain control in high-speed corners and through bumps. ✅ Slim profile designed for 2WD front buggies✅ Low-profile sidewall for reduced flex and sharper feel✅ C4 Red soft compound for aggressive front-end grip✅ Directional tread for tunable steering response✅ Optimized for carpet and turf tracks 📦 Includes:(2) Viper 2.2" Slim 2WD Front LP Carpet Tires 💡 Pro Tip: Match with C4 Viper rears for balanced handling and maximum traction.

Read more less

1up Racing LowPro 5mm Bullet Plugs – Ultra-Low Resistance, Pro-Level Finish ⚡ Dial in your wiring setup with 1up Racing LowPro 5mm Bullet Plugs — engineered for elite-level performance and clean installs. These compact, low-profile plugs feature an oversized 6-point contact for rock-solid connections and ultra-low resistance, maximizing efficiency and power delivery. 💡 Designed with a deep solder recess and only 15mm total length, these plugs are ideal for tight spaces and lightweight builds. Perfect for all LiPo batteries with 5mm inputs. ✨ Key Features: 🔩 LowPro Design – Just 15mm long for reduced weight and a cleaner install⚡ Oversized 6-Point Contact – Ensures secure fit and minimal resistance🔥 Easy-Solder Recess – Create strong, clean solder joints with 11–16 gauge wire📦 Universal Fit – Compatible with all LiPo packs using 5mm bullet connectors🛠️ Lightweight & Efficient – Built for performance and durability 📦 What’s in the Box? ✔️ (2) 1up Racing LowPro 5mm Bullet Plugs 💡 Upgrade Your Wiring Game – Get 1up Racing LowPro Bullet Plugs Today!

Read more less

The Team Losi Racing 22X AC Sway Bar Link Set (TLR-1112) is a replacement sway bar linkage set designed for the TLR 22X 2WD buggy platform. These links connect the sway bar system to the suspension, helping maintain consistent chassis balance and improved cornering stability. Built to OEM specifications, this set is perfect for replacing worn components or refreshing your suspension setup to keep your buggy performing at its best on the track. Features• Genuine Team Losi Racing replacement part• Designed for the TLR 22X 2WD buggy platform• Maintains proper sway bar operation and suspension balance• Ideal for maintenance, repairs, or race-day spares Includes• (1) AC Sway Bar Link Set  

Read more less

Maintain proper rear suspension geometry and durability with the Team Losi Racing Rear Suspension Arm Set V2. These updated replacement arms are designed for the 22X platform and offer the strength and precision needed for competitive racing and hard track use. Manufactured to Team Losi Racing’s exact specifications, the V2 rear arms provide consistent flex characteristics and reliable performance, making them ideal for replacing worn or damaged components or keeping spares ready in your pit box. Features: V2 rear suspension arm design Precision molded for strength and consistency Maintains proper rear suspension geometry Durable construction for race conditions Genuine Team Losi Racing replacement part Includes: (2) Rear Suspension Arms Compatibility: Team Losi Racing 22X Team Losi Racing 22X-4

Read more less

Restore strength and precision to your 22X with the Team Losi Racing Top Bridge Plate & Bulkhead Set. This genuine replacement set is designed specifically for the 22X 2WD buggy platform and is ideal for repairs, rebuilds, or keeping spares on hand. Features & Benefits: Genuine Team Losi Racing replacement components Maintains proper front-end alignment and chassis rigidity Precision-molded for correct fit and reliable performance Includes: (1) Top bridge plate (1) Bulkhead (1) Bulkhead brace Perfect for keeping your 22X dialed in and race-ready after hard racing or trackside impacts. ✅ Compatibility Losi 22X Losi 22X-T

Read more less

The F2 body from JConcepts brings IFMAR World Championship–winning design to the Losi 22X platform. Precision-engineered for a tight, clean fit, the F2 slides perfectly over the top deck and under the front shock tower, delivering race-proven aerodynamics and durability across dirt, carpet, and turf. About the F2 Buggy Body Proven Design & Advanced FeaturesThe aggressive, forward-biased cab improves steering response and adaptability on changing surfaces. A louvered roof with the Finnisher “V” profile enhances airflow and stability, while chamfered side-pods blend seamlessly into the cab for reduced drag. Extra rear windows add style, and reinforced spur-gear guard coverage with added clearance helps absorb impacts. Choose Standard or Lightweight thickness to match track conditions and durability needs. Features Proven F2 design from IFMAR World Championship lineage Forward-positioned cab with steep windshield for multi-surface control Tight chassis-outline fit for secure, clean mounting Louvered roof & Finnisher “V” for improved airflow and stability Double-step side-pods and roof for standout styling Reinforced spur-gear guard coverage with added clearance Includes (1) TLR 22X “F2” 1/10 Buggy Body (Clear) — Standard (0707) or Lightweight (0707L) (2) 6.5" Wings (carpet/turf/dirt) (1) Decal Sheet (1) Window Masking Sheet Compatibility: Losi 22XTech Note: Painted body shown for illustration only. Product is clear and unpainted.  

Read more less

The Team Losi Racing TLR-1075 Bulkhead and Kick Shims Set is a direct replacement designed for the 22X 2WD buggy platform. This set restores proper front-end geometry and durability, making it ideal for maintenance, rebuilds, or race prep. Manufactured to exact factory specifications, this bulkhead and shim set ensures correct kick-up angle and consistent suspension alignment. 🔧 Features Genuine Team Losi Racing replacement parts Direct-fit bulkhead for 22X platforms Includes kick-up shims for proper front suspension geometry Ideal for repairs, rebuilds, or race-day spares 📦 Includes (1) Bulkhead (2) Kick-Up Shims ✅ Compatibility Losi 22X Losi 22X-T

Read more less

Dial in your front-end feel with precision balance and smoother steering control. The R1WURKS B7 Series 10g Front Ball Stud Mount Weight is a simple drop-in upgrade that adds stability, traction, and predictability to the nose of your buggy—especially in conditions where the front end needs extra bite. Why Add Front-End Weight? Adding a small amount of mass to the front of your buggy can: Increase front-end traction Improve initial steering response Enhance mid-corner stability Reduce front-end bounce for smoother handling Help balance overall weight distribution when paired with battery placement adjustments Features High-quality brass construction Precision CNC machining Engraved for quick identification True drop-in fitment for the R1WURKS B7 ball stud mount Included (1) 10g Brass Weight (1) M2.5x8 Button Head Screw  

Read more less

Overview:Boost suspension precision and durability with the Team Associated RC10B7 Aluminum Arm Mount "C Block". CNC-machined from high-quality aluminum, this upgrade improves rigidity in the rear suspension, keeping hinge pins aligned under extreme racing loads. With its blue anodized finish and Factory Team quality, it’s a reliable upgrade over the stock composite mount for racers who demand consistency and strength. Features: Precision CNC-machined aluminum construction Stronger and more rigid than stock composite mounts Maintains accurate hinge pin alignment for consistent suspension geometry Blue anodized finish with Factory Team looks Genuine Team Associated Factory Team upgrade Compatibility: Team Associated RC10B7 1/10 2WD Buggy May also fit other B7-based platforms (verify with manual) Includes: (1) Aluminum Arm Mount "C Block" Part Number: 92432 ⚡ Pro Tip: Pair the Aluminum "C Block" with the Aluminum "D Block" (92433) for a fully reinforced rear suspension setup that maintains geometry through the toughest conditions.

Read more less

Fine-tune your XB2 with this Graphite Composite Front Left Suspension Arm featuring Low Shock Mounting (LSM) geometry in the short configuration. The Graphite blend offers the perfect balance of rigidity and controlled flex, making it ideal for medium to high-traction tracks where precision and cornering speed are key. Features: Graphite composite material for optimized stiffness and responsiveness Low Shock Mounting (LSM) design improves suspension geometry and handling Short length design for sharper steering response Factory XRAY precision molding for perfect fit Compatibility: XRAY XB2 (All variants using LSM geometry) Includes: (1) Front Left Suspension Arm – Short – Graphite

Read more less

1up Racing Pro Duty Equipment Case – Built for the Track, Ready for Anything 🔧 Protect your gear like a pro with the 1up Racing Pro Duty Equipment Case – the ultimate storage solution for racers who value durability, organization, and style. Whether you're hauling tools, electronics, or spare parts, this case is engineered to keep your essentials safe and scratch-free. 💼 Featuring a rigid outer shell, dense internal padding, and six customizable dividers, this case adapts to your setup with ease. Impact-absorbing foam on the top and bottom adds next-level protection, while the internal compartments and zippered pouch keep everything neat and accessible. ✨ Key Features: 🛡️ Heavy-Duty Shell with Dense Padding – Keeps your tools, chargers, and electronics safe📦 Adjustable Dividers – 6 foam inserts for a fully customizable interior layout🧵 Durable Black Fabric Interior – Clean, professional finish inside and out🧰 4 Tool Pouches + Zippered Pocket – Store scissors, pliers, leads, setup sheets, and more🧩 Impact-Absorbing Foam (Top & Bottom) – Superior protection during transport 📏 Dimensions: Interior Space: 23 x 20 x 7.5cm\ Dividers Included:✔️ (1) 23cm Divider✔️ (2) 12.5cm Dividers✔️ (3) 6.5cm Dividers 🎯 Built to Travel. Designed to Organize. Whether you're trackside or organizing your pit area at home, the 1up Racing Pro Duty Equipment Case keeps your essentials secure, accessible, and race-ready. 💡 Organize Like a Pro – Grab Your 1up Equipment Case Today!

Read more less

Team Associated RC10B7 FT Ballstud Mount, Black Aluminum – ASC92478 Factory-Precision Suspension Mount for the RC10B7 The Factory Team Standard Height Ballstud Mount is a durable, performance-focused upgrade for your RC10B7 platform. Crafted from CNC-machined aluminum and finished in stealth black, it delivers consistent rear camber link geometry with improved strength and tuning potential. ⚙️ Features: ✅ Standard Height – Maintains factory camber link geometry ✅ CNC-Machined Aluminum – Lightweight and built to last ✅ Black Anodized Finish – Sleek and stealthy Factory Team look ✅ Reliable Upgrade – Improves rear-end durability and tuning flexibility 📦 Includes: (1) Black Aluminum Ballstud Mount (Standard Height) Mounting hardware ✅ Compatibility: Team Associated RC10B7 Team Associated RC10B7 🏁 A must-have for racers seeking durable, factory-style performance with a sleek, blacked-out look.

Read more less

Team Associated RC10B7 FT Ballstud Mount +2mm, Blue Aluminum – ASC92477 Precision Suspension Tuning for the RC10B7 The Factory Team +2mm Ballstud Mount is a premium upgrade for serious racers. Machined from lightweight aluminum and anodized in signature blue, this mount allows for fine-tuning of rear camber link geometry, improving handling and cornering stability on the track. ⚙️ Features: ✅ +2mm Height – Raises rear camber link mount for improved roll center adjustment ✅ CNC-Machined Aluminum – Durable and lightweight ✅ Blue Anodized Finish – Factory Team look and corrosion resistance ✅ Increased Setup Options – Perfect for dialing in rear-end grip and handling on high-traction surfaces 📦 Includes: (1) +2mm Blue Aluminum Ballstud Mount Mounting hardware ✅ Compatibility: Team Associated RC10B7 Team Associated RC10B7D 🏁 Ideal for racers looking to fine-tune rear suspension geometry for high-performance setups.

Read more less

Team Associated RC10B7 FT Rear Hub Set, HRC, Blue or Black – 92473 / 92474Upgrade your RC10B7 with Factory Team aluminum HRC rear hubs – engineered for strength, precision, and tunability on high-grip tracks. These anodized blue or black hubs feature a high roll center (HRC) design to enhance handling, increased axle height adjustability, and a secondary bearing bore for use with FT universals. Built tough for serious racers who want consistency lap after lap. ✔️ CNC Aluminum for max durability✔️ HRC Design boosts handling on high-traction surfaces✔️ Supports higher axle heights and lower ride heights✔️ Compatible with Factory Team Universals✔️ Anodized in Blue (92473) or Black (92474)✔️ Includes left & right hubs plus mounting hardware✔️ Fits: RC10B7 & RC10B7D Race harder. Corner faster. Stay planted. 🏁  

Read more less

Team Associated FT 3x27.5mm V2 Chrome Shock Shafts – ASC91620 Smooth, Durable, Factory-Grade Suspension Parts Upgrade or replace your V2 shocks with the Factory Team 3x27.5mm Chrome Shock Shafts, engineered for exceptional performance and longevity. Designed specifically for #91577 buggy rear and #91578 truck front shock bodies, these shafts provide a precise fit with a low-friction chrome finish. ⚙️ Features: ✅ Chrome-coated for reduced stiction and increased durability ✅ Designed for secure screw-mounted piston setup ✅ Factory Team precision for consistent shock action ✅ Ideal for competitive racing environments 📦 Includes: (2) 3x27.5mm V2 Chrome Shock Shafts ✅ Compatibility: #91577 – Buggy Rear Shock Bodies #91578 – Truck Front Shock Bodies Not compatible with E-clip piston systems 🏁 Factory Team quality that keeps your ride smooth and race-ready!

Read more less

Team Associated RC10B7 Factory Team Aluminum Front Bulkhead (0°) Stronger. Straighter. Smarter. Upgrade your RC10B7’s durability and precision with the Factory Team Aluminum Front Bulkhead. Machined from high-quality aluminum with a zero-degree angle for optimal front-end geometry, this bulkhead is designed to withstand the rigors of competitive 1/10-scale racing. 🔧 Features: ✅ Factory Team Precision: CNC-machined aluminum for a tight, accurate fit ✅ Zero-Degree Angle: Delivers neutral front kick-up geometry ✅ Reinforced Design: Built to handle hard landings and aggressive racing ✅ Includes Set Screws: Complete package for quick installation 📦 Includes: (1) Aluminum Front Bulkhead (0°) (4) Set Screws 🔩 Compatibility: Team Associated RC10 B7 Team Associated RC10 B7D 💪 Built for racers who demand strength and precision at the front end.🛞 Factory Team quality — because your buggy deserves the best.

Read more less