Team Exalt X-Rated 2S LiPo Battery (4400mAh/150C)📦 Part #: EXA3201 Dominate the track with the Team Exalt X-Rated 4400mAh 2S LiPo – engineered with next-gen chemistry for racers who demand maximum voltage, minimum resistance, and race-winning consistency. Whether you're running stock or mod, this pack delivers explosive acceleration and sustained punch all the way to the finish. ⚡ X-Rated Series Performance Highlights: 150C Continuous / 300C Burst Discharge Rate Silicon Graphene Technology for increased efficiency and lifespan Flat Discharge Curve means less sag, more power throughout your run Low Internal Resistance and cooler operating temps 5mm High-Amp Bullet Connectors for maximum current delivery ROAR Approval Pending 📊 Battery Specifications: Capacity: 4400mAh Voltage: 7.4V (2S) Discharge Rate: 150C Burst Rate: 300C Weight: 220g ± Dimensions: 96 x 47 x 25.1mm (LxWxH) Connector Type: 5mm Bullets Whether you're chasing podiums or pushing for personal bests, the EXA3201 X-Rated LiPo gives you the edge in acceleration, efficiency, and endurance.

Read more less

Team Associated RC10B7 Hinge Pin Set Part Number: ASC92496 Keep your suspension smooth and secure with the Team Associated RC10B7 Hinge Pin Set. This replacement set includes all necessary hinge pins for the RC10B7 platform, ensuring your vehicle maintains proper alignment and performance during high-stress racing conditions. ✅ Features: Direct replacement for the Team Associated RC10B7 Precision machined for smooth suspension operation Includes full set of hinge pins for the front and rear Durable construction for long-lasting performance 📦 Includes: (1) Complete hinge pin set for RC10B7 🚗 Compatibility: Team Associated RC10 B7 Team Associated RC10 B7D

Read more less

Gens Ace Redline 2.0 2S Shorty LiHV Battery (7.6V/4400mAh) – 140C Burst Ultra-Lightweight. High Voltage. Race-Ready. The Gens Ace Redline 2.0 4400mAh Shorty LiHV delivers elite-level performance in a compact, lightweight design. Perfect for modified and stock class racing, this pack uses Silicon Graphene technology for ultra-efficient discharge, reduced heat, and excellent cycle life — all in a low-profile shorty layout for ideal chassis balance. ⚙️ Features: ⚡ 140C Continuous Discharge – smooth, consistent power when it matters most 🔋 7.6V LiHV / 4400mAh Capacity – lightweight performance for serious racers 🔌 5mm Bullet Connectors – high-amp, secure, and reliable power transfer 🪶 Ultra Low-Profile Shorty Pack – minimal weight, maximum agility 🧪 Matched cells and advanced stacking for stable output and long life 📐 Specifications: Voltage: 7.6V (2S LiHV) Capacity: 4400mAh Continuous Discharge: 140C Configuration: 2S1P Watt Hours: 33.44Wh Connector: 5mm Bullet Balance Plug: 2mm Bullet Dimensions: 96 x 47 x 18mm Weight: 163.1g (5.75oz) 🏁 For racers demanding every ounce of power in a nimble format, the Redline 2.0 4400mAh Shorty delivers blazing-fast response and unbeatable efficiency on the track.

Read more less

Gens Ace Redline 2.0 2S Shorty LiHV Battery (7.6V/5000mAh) – 140C Burst Unleash the Voltage – Dominate the Track The Gens Ace Redline 2.0 LiHV Shorty Battery is built for serious RC racers looking for explosive acceleration, sustained voltage, and consistent performance. Featuring ultra-low internal resistance and a massive 140C discharge rating, this lightweight pack delivers big power in a compact footprint — perfect for 1/10 scale racing applications. ⚙️ Features: ⚡ 140C Continuous Discharge – massive power for competitive racing 🔋 7.6V 2S LiHV / 5000mAh Capacity – extended runtime with high-voltage punch 🔌 5mm Bullet Connectors – secure, high-amp power delivery 📏 Shorty LCG design – low-profile for improved chassis balance and handling ✅ Factory-matched cells for consistency and efficiency 📐 Specifications: Voltage: 7.6V (2S LiHV) Capacity: 5000mAh Continuous Discharge: 140C Max Charge Rate: 1C (5.3A) Configuration: 2S1P Watt Hours: 38Wh Connector Type: 5mm Bullet Balance Plug: 2mm Bullet Dimensions: 96 x 46 x 19mm Weight: 177g (6.24oz) 🏁 Whether you're battling it out on high-traction carpet or slick dirt tracks, the Gens Ace Redline 2.0 Shorty brings unmatched burst and endurance to your race day setup.

Read more less

  The ProTek RC 2S 130C Si-Graphene + HV Shorty LiPo Battery is built for racers who demand maximum voltage stability, punch, and consistency from start to finish. Using advanced Silicon Graphene High-Voltage (LiHV) cell technology, this pack delivers higher efficiency, lower internal resistance, and longer cycle life compared to conventional LiPo and LiHV batteries. At just 219 grams, this shorty pack is lighter than many standard shorty batteries while offering a massive 6400mAh capacity and 7.6V nominal voltage. The result is stronger acceleration, improved runtime, and a flatter discharge curve that maintains voltage deeper into the run—exactly what competitive racers need. This battery is an excellent choice for 2WD and 4WD Modified, Stock Class racers looking to shave grams, and even 1/8 e-buggies running lightweight 2×2S saddle configurations. With improved thermal efficiency and durability, the ProTek Si-Graphene line is designed to perform under the most demanding race conditions. Features Silicon Graphene + High-Voltage (LiHV) cell technology Lighter than standard shorty packs with higher capacity Flatter discharge curve for consistent voltage output Lower internal resistance and reduced operating temperatures Increased cycle life compared to conventional LiPo batteries Ideal for Modified, Stock, and lightweight 1/8 applications ROAR Approved Includes (1) ProTek RC 2S 130C Si-Graphene + HV Shorty LiPo Battery (2) 5mm to 4mm Bullet Reducers (2) 5mm Bullet Connectors (1) 2mm Balance Bullet Connector Specifications Nominal Voltage: 7.6V (2S LiHV) Capacity: 6400mAh Discharge Rating: 130C (Peak) Maximum Charge Rate: 10C (1C recommended for longest life) Cell Configuration: 2S2P Watt Hours: 48.64Wh Weight: 7.72oz (219g) Battery Connector: 5mm Bullets Balance Connector: 2mm Bullet Dimensions (L×W×H): 3.78 × 1.85 × 0.98 in (96 × 47 × 25mm) ROAR Approved: Yes Battery Safety Notice Always balance charge LiPo batteries, never leave charging unattended, and use a LiPo-specific charger and safety bag. Proper charging and storage practices are required for safe operation and maximum battery life.  

Read more less

Protect your chassis and keep your B84 looking race-ready. This pre-cut chassis protective sheet is precision designed, offering durable protection against scrapes, wear, and track abuse. Manufactured by Legue Graphics, these chassis protectors deliver a clean, professional look while helping preserve long-term chassis condition. Available in multiple fun color options to match your build or team style. Features Precision cut specifically for each  Durable surface protection against scrapes and wear Includes extra removable tailpiece Clean, professional appearance Easy application after cleaning chassis with alcohol-based cleaner Manufactured by Legue Graphics Helps preserve chassis resale value Designed for competitive RC use  

Read more less

  Achieve pro-level setup accuracy with the JConcepts Aluminum Ride Height Gauge. Machined from billet aluminum, this high-spec tool provides precise measurements from 10–40mm, making it a must-have for competitive off-road racers. With laser-etched markings, smooth pivoting action, and a secure thumbscrew lock, this gauge ensures your ride height adjustments are consistent and repeatable. 🔥 Key Features: Precision-machined from billet aluminum Available in Blue (JCO2282-1) or Black (JCO2282-2) anodizing Laser-etched graduated scale from 10mm–40mm Rounded boss touch point for accurate chassis contact Chamfered silver edging highlights the design Pre-assembled with 4mm pivot hardware & 3mm thumbscrew Includes a latched storage box with foam insert for protection ✅ Compatibility: Works with a wide variety of 1/10 and 1/8 scale on-road and off-road vehicles Ideal for buggies, trucks, and touring cars (TC6/TC7 series) Suitable for any chassis requiring precise ride height adjustments within 10–40mm 📦 Includes: (1) JConcepts Ride Height Gauge (choose Blue or Black) (1) Latched Storage Box with Foam Cushion ⚠️ Tip:Most racers prefer to set ride height with a slight gap (~0.5mm) between the chassis and gauge for best performance.

Read more less

Upgrade or replace with precision using the Team Associated RC10B6.4 Front Bulkhead Set, featuring both 0° and 2.5° kick-up options. This set is a direct replacement for the B6.4 front bulkhead and offers adjustability to fine-tune your front-end geometry depending on track conditions and driving style. 📦 Includes: (1) 0° Front Bulkhead (1) 2.5° Front Bulkhead 📌 Compatibility: Team Associated RC10B6.4 RC10B6.4D May also be compatible with other B6 series models with slight adjustments 🔧 Key Benefits: Multiple kick-up angles for tuning front-end response High-quality composite material for durability Factory Team precision fitment and finish Ideal for racers looking to customize handling feel on entry and through corners. Keep both angles on hand and swap as needed to match the track!

Read more less

Fine-tune your chassis stiffness with the Team Associated RC10B6.4/B6.4D Factory Team Carbon Top Plate & Ball Stud Mount. This precision-crafted upgrade offers enhanced rigidity while allowing adjustable flex, giving racers more control over handling characteristics. Features: Carbon fiber construction for lightweight strength Adjustable top plate stiffness for fine-tuning handling Includes ball stud mount for secure, precise linkage connection Factory Team quality for professional-grade performance Compatibility: Team Associated RC10B6.4 Team Associated RC10B6.4D Includes: (1) Carbon Top Plate (1) Ball Stud Mount Perfect for competitive racers looking to dial in their chassis response and steering feel.

Read more less

  Keep your transmission running smooth with this genuine TLR 22 4.0 laydown idler gear and shaft set. Designed specifically for the laydown transmission setup, this replacement set includes everything needed to restore drivetrain performance. ✅ Includes:• (2) Idler Gears• (1) Idler Shaft ✅ Compatible with: TLR 22 4.0 Laydown Transmission✅ OEM replacement for precise fit and function✅ Built tough for high-performance racing Essential for keeping your TLR 22 4.0 dialed in and track-ready.

Read more less

Team Associated CVA/Wheel Hex Pin (4) [91436]🔩 Lock It Down with Precision!The Team Associated CVA/Wheel Hex Pin Set is your go-to solution for keeping your drivetrain tight and reliable. These precision steel pins are perfect replacements for connecting rear CVA axles and bones, or securing wheel hexes to both front and rear axles. 🛠 Features:✅ Durable steel construction✅ Perfect fit for CVA assemblies and wheel hexes✅ Essential for smooth, consistent performance 📦 Includes:(4) CVA/Wheel Hex Pins 🔥 Part Number: 91436🏁 Compatible with multiple Team Associated platforms

Read more less

Upgrade your drivetrain with the Team Associated Factory Team 11mm Octalock LCF Slipper Pad. Originally launched with the RC10B74.1 buggy, this pad is designed to work with Octalock spur gears and offers smoother, more consistent slipper performance. It also serves as an optional upgrade for the original RC10 B74 series. ✅ Factory Team Performance – Designed for competitive precision and durability✅ Octalock Compatible – Works with Team Associated Octalock spur gears✅ Optional Upgrade – Updates older B74 models to the latest slipper assembly✅ Race Proven – Trusted by Team Associated drivers worldwide Compatibility: Team Associated RC10 B74 (original) Team Associated RC10 B74.1 Team Associated RC10 B74.1D A must-have for serious racers, the 11mm Octalock LCF Slipper Pad keeps your buggy smooth, efficient, and race-ready.

Read more less

Team Associated RC10B7/B7D Factory Team Aluminum One-Piece Servo Mount (Blue) [92456] 💙 Lock It Down. Steer with Precision.Take your B7 or B7D to the next level with the Factory Team One-Piece Servo Mount! Crafted from ultra-light, tough-as-nails aluminum and finished in anodized blue with crisp chamfers and a laser-etched FT logo, this upgrade is all about flex-free performance and next-level style. Say goodbye to servo slop and hello to razor-sharp steering! 🔧 Upgrade Highlights:✅ One-piece flex-free design = increased steering precision🎯 Factory Team anodized finish with machined highlights💪 CNC aluminum construction—lightweight + durable✨ Laser-etched FT logo for pro-level bling 📦 Includes:(1) Blue Factory Team One-Piece Servo Mount 🔩 Part Number: 92456🚗 Compatible With: Team Associated RC10B7 Team Associated RC10B7D

Read more less

Team Associated 20mm Aluminum Clamping Servo Horn – 25T (Futaba/Savox/ProTek) – Part 1368Smooth Response. Secure Fit. Built to Perform. The Team Associated 20mm Aluminum Clamping Servo Horn (1368) is crafted from 7075 T6 aluminum for strength and precision. Designed for 25T spline servos (Futaba, Savox, ProTek, and others), this horn features a secure clamping design and a 20mm length that delivers smoother, more controlled steering input—ideal for 1/10 scale touring cars and competition setups. ✅ 7075 T6 aluminum construction – lightweight and incredibly strong✅ 20mm length – delivers smoother, more progressive steering feel✅ Clamping design – prevents spline slop and servo damage✅ Laser-etched spline size – easy, accurate identification✅ Compatible with Futaba, Savox, ProTek (25T spline)✅ Includes large M2.5 screw for secure clamp fit 📦 Includes: (1) 20mm Aluminum Clamping Servo Horn (25T) (1) M2.5 Clamp Screw Part #: 1368 💡 Pro Tip: Always torque the clamp screw securely to lock in performance and reduce servo spline wear.

Read more less

When performance matters, the Team Exalt X-Rated 5700mAh 2S LiPo is your ultimate power source. Designed with cutting-edge Silicon Graphene technology, this pack delivers exceptional efficiency, low resistance, and long-lasting power — giving you the edge you need lap after lap. ⚡ X-Rated Series Performance Highlights: 135C Continuous / 270C Burst Discharge Rate Silicon Graphene Cell Technology for improved efficiency and cycle life Flat Discharge Curve maintains consistent voltage under load Low Internal Resistance for cooler operation and more punch 5mm High-Amp Bullet Connectors ensure high current throughput ROAR Approval Pending 📊 Battery Specifications: Capacity: 5700mAh Voltage: 7.4V (2S) Discharge Rate: 135C Burst Rate: 270C Weight: 227g ± Dimensions: 96 x 47 x 25.1mm (LxWxH) Connector Type: 5mm Bullets Whether you're pushing your electronics to the limit or chasing consistency in long mains, the EXA3202 X-Rated LiPo gives you the confidence to run harder and longer.

Read more less

Team Exalt X-Rated 2S 135C HVX LiHV LCG Shorty Battery (7.6V/5100mAh) High Voltage. Race Ready. ROAR Approved. Give your setup the edge it deserves with the Team Exalt X-Rated HVX LiHV Battery. Built for competition, this 7.6V 2S LCG pack combines advanced chemistry, low resistance, and Silicone Graphene tech for powerful, consistent output and longer cycle life. The hardcase shorty design makes it perfect for tight 1/10 chassis builds where balance and performance are critical. ⚙️ Features: ✅ 135C Continuous Discharge Rate for maximum punch ⚡ LiHV (7.6V) design for high-voltage performance 🧠 Silicone Graphene Technology for lower IR and longer life 🔌 5mm High-Amp Bullet Connectors included 🏁 ROAR Approved since Dec. 2024 – race legal and track ready 🧊 LCG Hardcase to fit snug in shorty-compatible chassis 📐 Specifications: Voltage: 7.6V (LiHV 2S2P) Capacity: 5100mAh Continuous Discharge: 135C Dimensions: 96 x 46 x 22.5mm (LxWxH) Weight: 210g (7.40oz) Connector Type: 5mm bullets Balance Plug: 2mm bullets Watt Hours: 38.8Wh Charge Rate: 1C Max Configuration: LCG Hardcase Shorty ROAR Approved ✅ 💥 Optimized for elite 1/10 scale racing in both off-road and on-road platforms.Stay cool, stay powerful — Exalt X-Rated gets you to the finish line faster.  

Read more less

Dial in your aero and add a clean, pro finish to your 1/10 RC build with BOOF RC Wing Washers.These lightweight aluminum washers reinforce your wing mounting points, preventing cracks, pull-through, and premature wear — especially on high-downforce setups. Designed for racers who want performance, durability, and style without paying premium brand prices. Features: ✔️ Lightweight Aluminum Construction – Strong and low-mass for optimal wing support ✔️ Reduces Wing Damage – Prevents cracking and screw pull-through ✔️ CNC Machined Finish – Clean fitment with a premium look ✔️ Multiple Color Options – Customize your style ✔️ Easy Bolt-On Upgrade – Works with standard 1/10 wing hardware Specs: Fitment: 1/10 RC (buggy, touring, drift, basher) Material: Aluminum Hardware: M3 mounting compatible Pack: 2pcs (one pair) Available Colors: 🟥 Red⬛ Black🩶 Titanium🟦 Royal Blue🩵 Light Blue 🟩 Green🟪 Purple⭐ Gold🤍 Silver (Availability may vary) In the Pack: (2) BOOF RC Aluminum Wing Washers Perfect For: 1/10 Buggies 1/10 Touring & Drift High-downforce setups Bashers that break wings often Why BOOF RC? Affordable, clean, functional upgrades — without the silly markup.  

Read more less

Upgrade your brushless setup with the ProTek RC Braided Sensor Cable — built for durability, flexibility, and ultra-reliable data transfer between your ESC and motor. Whether you're racing or bashing, this premium sensor cable ensures clean communication and long-lasting performance. Overview The ProTek RC braided sensor cable uses flexible silicone-shielded internal wires wrapped in a tough nylon braided outer sheath for maximum protection. Heat-shrink ends secure the braid and reinforce the connection points, preventing damage or fraying. This creates a smooth-bending, shock-absorbing cable that maintains consistent sensor accuracy under extreme chassis movement. Perfect for any sensor-based brushless system that uses standard replaceable sensor harnesses. Features Durable black braided nylon outer sheath Silicone-shielded internal sensor wires Heat-shrink reinforced ends for long life Flexible, shock-absorbing design Ensures clean and consistent ESC–motor data transfer Compatible with all standard brushless systems using 6-wire sensor leads Great upgrade for racing applications Includes (1) ProTek RC Braided Brushless Motor Sensor Cable — 150mm

Read more less

The Team Associated Reedy Power Servo Wire Extension Leads are the perfect solution for clean and reliable wiring in your RC build. Whether you’re routing around a large chassis or need extra length to reach your ESC or receiver, these premium extensions ensure a secure and low-resistance connection every time. Available in three convenient lengths (100mm, 150mm, and 200mm), they make it easy to achieve a tidy, professional-grade layout while maintaining top-level electrical performance. ⚙️ Features: Ideal for extending servo or ESC leads in any RC application High-quality, flexible wire for smooth routing and durability Cleanly connects servo to speed controller with minimal resistance Available in multiple lengths for the perfect fit in any setup Factory-terminated with precision connectors for plug-and-play use 📏 Specifications: Part Numbers: 100mm (3.93") — 27143 150mm (5.90") — 27144 200mm (7.87") — 27145 Connector Type: Standard Servo Plug (JR-Style) Lengths Available: 100mm / 150mm / 200mm Wire Gauge: 26 AWG (Flexible silicone wire) Brand: Reedy Power (by Team Associated) 📦 Includes: (1) Servo Wire Extension Lead (Choose Length) 💡 Pro Tip:Use the shortest extension that fits your layout — shorter wires reduce electrical resistance and keep your build looking clean and efficient.  

Read more less

Compatible with iCharger, iSDT, and SkyRC Chargers Overview:The TQ Wire XT60 2S Charge Cable delivers the perfect balance of premium materials, versatile connectivity, and durability. Designed for serious RC racers and hobbyists, this lead makes charging your 2S LiPo batteries easier, cleaner, and more reliable—whether you’re in the pit or at the track. About the XT60 2S Charge Cable Built for Performance and DurabilityFeaturing dual-size stepped bullets (4mm & 5mm), this cable ensures compatibility with a wide range of LiPo batteries. The 2-foot cable uses 12-gauge high-strand silicone wire wrapped in protective black nylon mesh, giving you maximum current flow and long-lasting flexibility. The XT60 connector provides a secure, low-resistance connection to your charger, compatible with popular models such as the Junsi X6 iCharger, iSDT, and SkyRC B6, as well as other chargers that use an XT60 output. Premium Design FeaturesTQ Wire went the extra mile with a molded strain relief housing around the bullet connectors and balance port, ensuring a stronger connection and minimizing wire fatigue. Integrated “grippers” make it easy to remove the bullets from your battery safely and efficiently—no more struggling with tight fits or risking wire damage. Features: XT60 connector for charger connection (iCharger/iSDT compatible) 4mm & 5mm stepped bullets fit most 2S LiPo packs Durable molded strain relief for long life and safety Integrated “grippers” for easy battery removal Heavy-duty 12-gauge silicone wire for efficient power transfer Wrapped in black nylon mesh for protection and clean looks 2-foot length provides ample reach without clutter Specifications: Specification Details Length 2 feet (610mm) Wire Gauge 12 AWG Charger Connector XT60 Battery Connectors 4mm & 5mm Stepped Bullets Balance Port XH Compatibility Junsi X6 iCharger, SkyRC B6, iSDT, and any XT60-output charger Includes: (1) TQ Wire 2S XT60 Charge Cable with 4mm/5mm Bullets Note:TQ Wire also offers a version with low-profile 90° tubes instead of the XT60 connector for alternative setups.

Read more less

Overview:The XRAY XB2 2026 represents the next evolution in XRAY’s championship-winning 1/10 2WD buggy platform. Built with precision, innovation, and attention to detail, the 2026 edition continues XRAY’s tradition of delivering pro-level performance straight out of the box. About the XB2 2026 Refined Engineering. Race-Proven DNA.While official specifications are forthcoming, the XB2 2026 is expected to feature numerous updates to geometry, handling balance, and drivetrain efficiency — maintaining XRAY’s reputation as one of the most tunable and durable platforms in competitive off-road racing. Designed and manufactured in Europe with the highest quality materials and engineering precision, the XB2 2026 is built for serious racers looking to gain an edge on any surface. Anticipated Highlights: Refined chassis balance for improved stability and corner speed Updated suspension geometry for enhanced traction and control Lightweight, high-strength composite and aluminum components Precision ball differential or gear diff options (based on version) Factory-finished shock package for smooth, consistent damping Multiple setup options for dirt, carpet, and astro tracks XRAY’s renowned fit, finish, and build quality throughout Includes: (1) XRAY XB2 2026 1/10 2WD Electric Buggy Kit (unassembled) Part Number: 320020

Read more less

Upgrade or refresh your RC10B7’s steering and suspension with this genuine Team Associated rod end set. Designed specifically for the Team Associated RC10B7 1/10 buggy, these rod ends deliver the precision fit, smooth articulation, and durability you need to keep your buggy performing at its best. 📦 Includes: (16) Rod Ends 🔧 Compatibility: Team Associated RC10B7 1/10 Buggy 💡 Perfect for replacing worn or damaged rod ends to restore crisp steering response and suspension performance.

Read more less

JConcepts 12mm Hex Mono 2.2" Front Wheels (4) – Yellow or WhitePart Numbers: JCO3347Y (Yellow), JCO3347W (White) Upgrade your 1/10 buggy with these JConcepts Mono 2.2" Front Wheels, designed for performance, durability, and style. Available in bright white or fluorescent yellow, these wheels feature popular dish-style detailing and are molded using an advanced manufacturing process for maximum precision and strength. Perfect for racers running Team Associated B5, B5M, B4.1, or Kyosho RB5 platforms with 12mm hex conversions, these wheels offer great fitment, longevity, and modern styling. 🔧 Key Features: Fits: Team Associated B4.1/B5/B5M/B4.2 (w/ adaptors), Kyosho RB5 (direct fit) Quantity: 4 wheels per pack Color Options: White (JCO3347W), Yellow (JCO3347Y) ROAR-legal sizing with a dish-style concave design 12mm hex mount Vented design improves glue adherence Made from durable, race-proven material 🛠️ Compatibility Notes: For B4.1: Requires JConcepts clamping hexes (front/rear) and Team Associated hex conversion For Kyosho RB5: Use locking-style rear wheel nuts (JC #2089 Blue or #2090 Black) Designed for standard (wide) front-end configuration Will not work properly with narrow setups or without locking nuts on RB5 Specs: Feature Detail Position Front Diameter 2.2" Hex Size 12mm Quantity 4 Wheels Scale 1/10 Buggy Color Options White / Yellow Vehicle Type 2WD Buggy Bring style and performance to your front end with the JConcepts Mono wheels—perfect for racers who demand precision and durability on the track.

Read more less

Boost your buggy’s performance with this high-quality Factory Team Carbon Composite Laydown Gearbox and Chassis Braces set! Designed for racers looking to increase chassis rigidity and reduce unwanted flex, this upgrade delivers improved consistency, sharper handling, and enhanced tuning potential on high-grip surfaces. ✅ Key Features: Factory Team carbon composite construction for added durability and reduced flex Improves overall chassis response and driving precision Ideal for high-grip tracks where consistency is key Direct fit for RC10B6 platform—easy bolt-on performance upgrade 📦 Includes: (1) Laydown Gearbox (Carbon Composite) (2) Chassis Braces (Carbon Composite) 🔧 Compatibility: Team Associated RC10B6 Also compatible with RC10B6.1, B6.2, B6.3, and similar laydown setups Take your tuning to the next level with Factory Team precision—perfect for racers chasing every tenth!

Read more less

Team Losi Racing Upper Shock Bushing Set (4) – TLR5092 This is a genuine Team Losi Racing Upper Shock Bushing Set, designed for the TLR 22 1/10 buggy. These bushings provide a secure, smooth mounting point for your shock assembly and help reduce unwanted flex or wear during aggressive driving. ✅ Includes: 4 upper shock bushings✅ Fits: TLR 22 series✅ Genuine TLR performance parts Keep your suspension smooth and race-ready with factory-spec replacement bushings.

Read more less

Team Associated Rear Suspension Arms: RC10B74   ASC92130

Read more less

This Buggy Body is a clear body option intended for the Team Associated RC10B7 buggy. Using the same body style included in the RC10B7 kit, this clear body gives you the option to add a spare body to your stable or add your own custom paint and flair! NOTE: Painted body shown in the photos is for illustrative purposes only. The product you will receive is clear and unpainted. Includes: (1) RC10B7 Buggy Body (Clear) (1) Window mask sheet Stickers COMPATIBILITY: Team Associated RC10 B7 OriginalTeam Associated RC10 B7D

Read more less

Team Associated RC10B7 Shock Tower Covers & Upper Wing Mount [92487] 💥 Upgrade your B7 with Precision Fit & Factory Style!Keep your buggy looking factory fresh and race-ready with the Team Associated RC10B7 Shock Tower Covers & Upper Wing Mount. Designed specifically for the RC10B7 platform, this set adds clean protection for your shock towers while locking down your rear wing with a durable, lightweight upper mount setup. 🏁 Why You’ll Love It:✅ Direct fit for the B7 platform—no mods needed🛡️ Protects your shock towers from dirt, debris, and damage🚀 Lightweight upper wing mount keeps your wing locked and stable🔩 Includes all the hardware you need—bolt it on and go! 📦 Includes:(2) Front Shock Tower Covers(1) Rear Shock Tower Cover(1) Upper Wing Mount SetMounting Hardware 🛠️ Part Number: 92487🏎️ Vehicle Compatibility: Team Associated RC10B7  

Read more less

Keep your suspension dialed in with these M3x48mm steel turnbuckles from Team Associated. Designed for strength and precision, they’re a direct replacement for worn or bent camber or steering links on a variety of Team Associated vehicles. 🔥 Key Features: High-strength steel construction for durability M3 thread with a 48mm (1.89") length Ideal for use in suspension and steering linkages Precision-machined threads for secure fit and adjustability Standard AE turnbuckle design for easy setup ✅ Compatibility: RC10B6 / B6.1 / B6.2 / B6.3 series (various locations) SC6.1 / T6.1 / T6.2 May also fit other models requiring M3x48mm turnbuckles — check your manual for fitment 📦 Includes: (2) M3 x 48mm Turnbuckles (1.89") ⚠️ Note:For proper installation, use a 3mm turnbuckle wrench and thread into ballcups evenly to maintain symmetry and alignment.

Read more less

Upgrade your RC10B6.3 front-end handling with these Factory Team Steering BlockArms. Featuring a +1mm height and made from lightweight carbon fiber, these HT (High Traction) arms are designed to optimize steering feel and response in high-grip conditions. A must-have for racers looking to fine-tune their setup for maximum performance. 🔥 Key Features: Genuine Team Associated Factory Team upgrade +1mm height for increased front roll center High traction (HT) geometry improves cornering in grippy conditions Constructed from precision-cut carbon fiber Lightweight and durable for competition use ✅ Compatibility: RC10B6.3 RC10B6.3D May fit other RC10B6-series vehicles with similar front-end geometry 📦 Includes: (1) Left Steering Block Arm (1) Right Steering Block Arm ⚠️ Note:Factory Team parts are intended for experienced builders and racers. Always check fitment before installation.

Read more less

Upgrade your suspension precision with the Factory Team 13mm Shock Pistons from Team Associated. The #91932 piston set features two 1.6mm holes with a 2.5mm thickness, providing a stiffer pack than larger hole configurations—ideal for high-speed, high-traction conditions. 📦 Includes: (2) FT 13mm Shock Pistons – 2x1.6mm holes 2.5mm thick profile ⚙️ Key Features: Designed for 13mm shock bodies Precision-molded for consistency and smooth operation Offers increased damping over 2x1.7 and 2x1.8 setups Used by top racers for fine-tuning on rough or fast tracks Fits platforms like RC10B6.4, RC10B74.2, and more 📌 Tuning Note: Smaller holes = more pack. Great for front shocks when you want the car to stay flatter in transitions or landings.

Read more less

Fine-tune your rear suspension geometry with the RC10B74 Rear Hub Insert Set from Team Associated. These precision-molded inserts allow you to customize hub adjustments for optimized handling on a variety of track surfaces. 🔧 Key Features: Factory Team precision for pro-level tuning Multiple offset options for customized camber and toe settings High-quality molded composite for durability Direct fit for RC10B74 rear hubs Ideal for racers seeking performance edge 📦 Includes: (1) Set of Rear Hub Inserts (multiple offsets) ✅ Compatibility: Team Associated RC10B74 May fit other models in the B74 lineup (check manual for fitment) Whether you're tuning for more cornering grip or better straight-line stability, this insert set gives you the flexibility you need to dial in your setup.

Read more less

Overview:Boost suspension precision and durability with the Team Associated RC10B7 Aluminum Arm Mount "C Block". CNC-machined from high-quality aluminum, this upgrade improves rigidity in the rear suspension, keeping hinge pins aligned under extreme racing loads. With its blue anodized finish and Factory Team quality, it’s a reliable upgrade over the stock composite mount for racers who demand consistency and strength. Features: Precision CNC-machined aluminum construction Stronger and more rigid than stock composite mounts Maintains accurate hinge pin alignment for consistent suspension geometry Blue anodized finish with Factory Team looks Genuine Team Associated Factory Team upgrade Compatibility: Team Associated RC10B7 1/10 2WD Buggy May also fit other B7-based platforms (verify with manual) Includes: (1) Aluminum Arm Mount "C Block" Part Number: 92432 ⚡ Pro Tip: Pair the Aluminum "C Block" with the Aluminum "D Block" (92433) for a fully reinforced rear suspension setup that maintains geometry through the toughest conditions.

Read more less

Overview:Upgrade your motor mounting hardware with the JConcepts 3x6mm Finnisher Titanium Motor Screws. Precision-machined from lightweight titanium, these screws are both strong and stylish—giving you reduced weight without sacrificing durability. Available in Blue (2549-1) or Black (2549-2) anodized finishes, they’re the perfect blend of function and looks for your high-end RC build. Features: Machined from premium titanium for maximum strength and reduced weight Available in anodized Blue or Black finishes Low-profile Finnisher head design for a sleek look M3 x 6mm size – ideal for motor mounting applications Includes 2 screws per package Compatibility: Fits most 1/10 scale motors and motor plates that require 3x6mm screws Commonly used across popular RC racing platforms (check your motor and chassis manual for exact fitment) Part Numbers: Blue – 2549-1 Black – 2549-2  

Read more less

Upgrade your rear-end setup with precision and strength! This wide gull-wing carbon fiber rear shock tower is designed to optimize shock positioning for increased stability and rear traction, especially in high-bite track conditions. A direct replacement part for B6.3 and B6.3D platforms, it’s lightweight, ultra-durable, and race-proven. ✅ Key Features: High-quality carbon fiber construction for superior strength and reduced flex Wide gull-wing geometry enhances suspension performance and tuning range Lightweight upgrade with professional-level reliability Direct replacement with factory fit and finish 📦 Includes: (1) Carbon Fiber Wide Gull-Wing Rear Shock Tower 🔧 Compatibility: Team Associated RC10B6.3 Team Associated RC10B6.3D Pair it with the front gull-wing tower (#91880) for maximum performance and chassis balance.

Read more less

Upgrade your drivetrain with this optional set of TLR 22X-4 68mm CVA Driveshaft Bones. Precision-engineered for the front/center position, these driveshafts deliver smoother power transfer, improved durability, and consistent performance lap after lap—perfect for serious racers looking for reliability and precision. 🔧 Features:✅ 68mm CVA driveshaft bones for front/center position✅ Designed for optimized durability and power delivery✅ Precision machined for smooth, consistent operation✅ Ideal for high-performance race setups 📦 Includes:• (2) 68mm CVA Driveshaft Bones 🚗 Compatibility:• Losi 22S Sprint• Losi 22X• Losi 22X-4• Losi 22X-4 Elite Dominate the track with smoother handling and added strength—this is a must-have upgrade for your Losi race platform!

Read more less