Team Associated FT 3x35mm V2 TiN Shock Shafts – ASC91623 High-Performance Titanium Nitride Shock Shafts for #91579 Upgrade your suspension system with the 3x35mm Factory Team V2 TiN Shock Shafts, designed for use with #91579 truck rear shock bodies. Featuring a durable Titanium Nitride (TiN) coating, these shafts reduce friction and wear, delivering smoother and more consistent shock performance. ⚙️ Features: ✅ TiN coating for enhanced durability and ultra-smooth operation ✅ Screw-mounted piston design for secure, reliable assembly ✅ V2 shock shaft spec for modern Team Associated platforms 📦 Includes: (2) 3x35mm V2 TiN Shock Shafts ✅ Compatibility: #91579 – Truck Rear Shock Bodies Not compatible with E-clip pistons 🏁 Trusted Factory Team engineering — made to withstand the rigors of high-performance RC racing.

Read more less

Team Associated RC10B7 Factory Team Vented Slipper Hubs – ASC92451 Consistent Performance. Cleaner Operation. Upgrade your RC10B7 with the Factory Team Vented Slipper Hubs. These precision-engineered hubs feature vented slots that help flush debris from the slipper pad assembly—ensuring smoother, more consistent slipper action during demanding runs. ⚙️ Features: ✅ Factory Team upgrade for the RC10B7 ✅ Vented design expels debris from slipper area ✅ Enhances consistency and durability of the slipper clutch ✅ Ideal for high-traction and dusty conditions 📦 Includes: (2) Vented Slipper Hubs ✅ Compatibility: • • RC10B7

Read more less

Team Associated RC10B7 Factory Team Aluminum Front Bulkhead (0°) Stronger. Straighter. Smarter. Upgrade your RC10B7’s durability and precision with the Factory Team Aluminum Front Bulkhead. Machined from high-quality aluminum with a zero-degree angle for optimal front-end geometry, this bulkhead is designed to withstand the rigors of competitive 1/10-scale racing. 🔧 Features: ✅ Factory Team Precision: CNC-machined aluminum for a tight, accurate fit ✅ Zero-Degree Angle: Delivers neutral front kick-up geometry ✅ Reinforced Design: Built to handle hard landings and aggressive racing ✅ Includes Set Screws: Complete package for quick installation 📦 Includes: (1) Aluminum Front Bulkhead (0°) (4) Set Screws 🔩 Compatibility: Team Associated RC10 B7 Team Associated RC10 B7D 💪 Built for racers who demand strength and precision at the front end.🛞 Factory Team quality — because your buggy deserves the best.

Read more less

Team Associated RC10B7 Top Shaft – Precision Replacement for Smooth Power Delivery! ⚙️ Keep your RC10B7 or RC10B7D drivetrain performing flawlessly with the Team Associated Top Shaft!This precision-machined replacement part is built to deliver smooth, reliable power transfer, helping maintain your buggy’s peak performance on race day. ✨ Key Features: ⚙️ Precision Machined Top Shaft – Ensures smooth and efficient drivetrain performance 🔧 Direct Replacement – Designed specifically for easy fitment in the RC10B7 and RC10B7D 🏁 Factory Team Reliability – Manufactured to meet Team Associated’s competition-grade standards 🛠️ Essential for Maintenance – Restore like-new drivetrain function after wear or damage 📦 Includes: ✔ (1) Top Shaft 📦 Compatibility: ✅ Team Associated RC10B7 ✅ Team Associated RC10B7D 📌 Note: 🔹 Use as a direct replacement for the stock top shaft.🔹 Recommended for racers looking to maintain drivetrain reliability and performance. 🏁 Maintain peak drivetrain efficiency with the Team Associated Top Shaft! 🔥 Smooth power, consistent performance — race ready with Factory Team precision!   

Read more less

Gens Ace Redline 2.0 2S Shorty LiHV Battery (7.6V/6000mAh) – 140C Burst Race-Ready Power. Expanded Runtime. Shorty Format. Push your limits with the Gens Ace Redline 2.0 6000mAh LiHV Shorty — a premium high-discharge racing battery built for domination. Engineered with Silicon Graphene technology, this pack delivers stable voltage, a flatter discharge curve, and long-term cycle performance — all in a low-profile shorty size perfect for 1/10 scale competitive setups. ⚙️ Features: ⚡ 140C Continuous Discharge – massive power delivery for serious racers 🔋 7.6V LiHV / 6000mAh Capacity – extended runtime and high-voltage performance 🔌 5mm Bullet Connectors – high-amp, secure connectivity 🪶 Shorty LCG Design – optimized for low center of gravity setups 🔬 Factory-matched cells for superior balance and reliability 📐 Specifications: Voltage: 7.6V (2S LiHV) Capacity: 6000mAh Continuous Discharge: 140C Configuration: 2S2P Watt Hours: 45.6Wh Connector: 5mm Bullet Balance Plug: 2mm Bullet Dimensions: 96 x 47 x 25mm Weight: 220g (7.76oz) 🏁 For racers needing a perfect blend of raw power, extended runtime, and reliable heat management, the Gens Ace Redline 2.0 6000mAh Shorty delivers. Built for the podium.

Read more less

1up Racing LowPro Bullet Plugs + Grips – The Perfect Pairing for Clean Power Delivery 🔥 Take your wiring to the next level with the 1up Racing LowPro Bullet Plugs and Grips — the ultimate combo for pro-level installs and unmatched reliability. Designed for all LiPo batteries with 5mm inputs, this duo ensures a secure connection, minimal resistance, and a factory-finished look. ⚡ The LowPro Plugs feature a deep solder recess for clean joints with 11–16 gauge wire, while the Grips slide snugly into place, providing clear terminal ID and a stylish silver outer ring for superior grip and aesthetics. ✨ Key Features: 🔩 LowPro 5mm Bullet Plugs – Oversized 6-point contact for secure, low-resistance connection🧲 Deep Solder Recess – Quick, easy soldering with any 11–16 AWG wire🎨 Grips with Color ID – Instantly identify positive/negative terminals💪 Textured Outer Ring – Superior grip and eye-catching finish⚙️ Universal Fit – Works with all LiPo batteries using 5mm bullet inputs 📦 What’s in the Box? ✔️ (2) 1up Racing LowPro 5mm Bullet Plugs✔️ (2) Color-Grip Caps (Red + Black) 📌 Tip: Use a couple drops of CA glue to secure the grips after install! 💡 Wired to Win – Upgrade to 1up LowPro Bullet Plugs + Grips Today!  

Read more less

JConcepts F2 Lightweight Body for XRAY XB2 2024 – Includes Two 6.5" Wings🏁 Lighten Up and Stay Fast – Proven Aero for High-Grip Racing The JConcepts F2 lightweight body for the XRAY XB2 2024 is built for serious racers looking to reduce weight and gain responsiveness on high-bite surfaces like turf, carpet, and polished clay. Based on the same winning layout as the standard F2, this lightweight version trims the fat while keeping all the performance you expect from a JConcepts shell. Featuring the signature forward cab bias, dual rear windows, and Finnisher "V" side-pod design, the F2 body offers maximum downforce, clean airflow, and high-speed stability. The slim profile hugs the XB2 2024 chassis perfectly, with built-in clearance for spur gear guards and space for electronics and wiring. ✨ Key Features: Direct fit for the XRAY XB2 2024 platform Clear lightweight polycarbonate for reduced weight and snappier handling Original JConcepts F2 profile with aggressive styling and aero balance Dual step side-pods and cab-forward layout for optimal steering response Includes (2) 6.5" Carpet | Turf | Dirt Wings Spur gear guard clearance molded into the body Comes with window masks and full decal sheet 📦 Includes: (1) F2 Clear Lightweight Body for XRAY XB2 2024 (2) 6.5" Wings (1) Window Mask Sheet (1) JConcepts Decal Sheet ⚠️ Note: Painted body shown for illustrative purposes only. Product ships clear and untrimmed. Compatibility: XRAY XB2 2024 Carpet XRAY XB2 2024 Dirt

Read more less

JConcepts F2 Body for XRAY XB2 2024 (Standard Weight) – Includes Two 6.5" Wings🏁 Championship-Winning Design for Carpet, Turf, and Dirt Racing The JConcepts F2 body has become a go-to choice for top-tier performance in 1/10 scale off-road buggy racing. Now available for the XRAY XB2 2024, this body delivers a tight-fitting, aggressive layout with forward cab bias and aerodynamic enhancements, ready to take on any high-grip surface. The F2 shell integrates key design elements from the IFMAR World Champion platform, including chamfered side-pods, a louvered roof, and the unmistakable Finnisher "V" profile. Built to hug the chassis for a perfect fit, the body clears the spur gear guard and leaves room for performance parts while looking sharp on the track. 🎯 Key Features: Designed specifically for the XRAY XB2 2024 platform Original JConcepts F2 styling for performance and aesthetics Clear polycarbonate – standard thickness for balanced durability and flex Tight chassis fit with clean front-end coverage Louvered roof and rear kick-up stabilizer for enhanced downforce Double-step side-pods and Finnisher-inspired cab shape Built-in clearance for the spur gear guard Includes (2) 6.5" Carpet | Turf | Dirt Wings Comes with window masks and JConcepts decal sheet 📦 Includes: (1) F2 Clear Body for XRAY XB2 2024 – Standard Weight (2) 6.5" Wings (1) Window Mask Sheet (1) JConcepts Decal Sheet ⚠️ Note: Painted body shown for display purposes only. Product ships clear and untrimmed. Compatibility: XRAY XB2 2024 Carpet XRAY XB2 2024 Dirt

Read more less

JConcepts XRAY XB2 2024 "S15" Clear Buggy Body w/Two Wings High-Performance Shell for Elite-Level Racing Give your XRAY XB2 2024 the competitive edge with the JConcepts "S15" Buggy Body. Designed with precision for both the Carpet and Dirt versions of the XB2 2024, the S15 body blends aggressive styling with aerodynamic refinement for maximum performance. Mid-body winglets, a rear stabilizer kick-up, and the iconic “shark fin” cockpit spine enhance stability, steering response, and on-track handling. Whether you're running a tall shorty or the recommended saddle pack layout, the revised side-pods ensure proper clearance and a clean fit. Molded from clear polycarbonate, the S15 is ready for your paint scheme and includes everything you need to finish it off with professional results. ✨ Features: 💨 S15 Styling – Based on the popular Silencer body, tuned for XB2 2024 layout 🧭 Forward Cab Bias – Improves steering and directional stability 🛡️ Mid-Body Winglets – Add downforce and side bite for increased grip 🦈 Cockpit Shark Fin – Enhances high-speed tracking and body rigidity 🔧 Raised Rear Side-Pods – Accommodates multiple battery layouts 🪶 Available in Regular & Lightweight Versions (this version is standard) ✂️ Includes Window Mask & Decal Sheet 📦 Includes: ✔ (1) Clear S15 Body for XRAY XB2 2024✔ (2) Rear Wings✔ (1) Window Mask Sheet✔ (1) JConcepts Decal Sheet ✅ Compatibility: XRAY XB2 2024 Carpet Edition XRAY XB2 2024 Dirt Edition 🖌️ Note: Body comes clear and unpainted. Painted body shown for illustration purposes only.

Read more less

Keep your pit and workbench organized with the JConcepts Parts Storage Box, purpose-built for RC racers and builders who demand efficiency and durability. With a smart multi-compartment layout and customizable dividers, this case provides a professional way to store screws, shims, bearings, hardware, and small components safely and accessibly. Crafted from injection-molded durable material, the JConcepts box features a black/smoke-grey finish for a sleek, race-ready look, while the secure snap-fit lid and lid stay wedges allow for convenient open-pit access. Designed with precision and practicality in mind, it’s the perfect companion for racers who need their parts ready to go at a moment’s notice. ⚙️ Features: Injection-molded durable construction ensures long-term strength and reliability Multi-compartment design keeps parts organized and easy to access Customizable dividers can be arranged to fit your exact setup Functional lid stay wedges hold the lid open for hands-free access Precision fit and finish with a clean, professional appearance Ideal for screws, shims, bearings, clips, gears, and small parts 📏 Specifications: Part Number: 5128-28 Color: Black / Smoke Grey Dimensions: 14.5 x 11 x 2.37 in (368 x 280 x 60 mm) Material: Injection-molded plastic Compartments: Adjustable via included dividers 📦 Includes: (1) JConcepts Parts Storage Box (1) Set of Adjustable Dividers 💡 Pro Tip:Pair this Parts Storage Box with the JConcepts Finish Line Pit Bag for the ultimate traveling pit setup — organized, protected, and race-ready wherever you go.    

Read more less

Precision Fit. Proven Strength. Upgrade your suspension geometry with the Team Associated Factory Team Aluminum 3-Gear Gearbox Arm Mount “C” Block. Designed for the RC10B7, B7D, T7, and SC7 platforms, this CNC-machined aluminum mount provides superior strength, precise alignment, and long-lasting durability under the toughest racing conditions. Factory-Grade Performance Engineered to maintain suspension integrity and reduce flex, this aluminum “C” block ensures consistent handling through high-speed corners and rough landings. Whether you’re chasing podiums or fine-tuning setup precision, this component delivers the reliability and performance serious racers expect from Team Associated. Features: CNC-machined aluminum construction for maximum rigidity and precision fit Designed for 3-gear gearbox setups Improves consistency and handling through rough terrain Factory Team engineering for professional-grade reliability Direct replacement for stock “C” block Includes: (1) Aluminum 3-Gear Gearbox Arm Mount “C” Block Compatibility: Team Associated RC10 B7 Team Associated RC10 B7D Team Associated RC10 T7 Team Associated RC10 SC7 Team Associated Factory Team — Engineered to Win.

Read more less

  Power your precision RC builds with the Futaba 4PM Plus, a 4-channel radio system offering industry-leading reliability and features. Paired with the R304SB‑E telemetry-enabled receiver, this combo delivers low-latency performance, fine control, and telemetry feedback—perfect for high-end cars, boats, and surface vehicles. 🎯 Key Features Futaba T‑FHSS 2.4 GHz Modulation: Ultimate signal stability and ultra-low latency 4PM Plus Transmitter: Sleek, ergonomic form factor with a full-color display and intuitive button layout Built-in Telemetry: Monitor battery voltage, temperature, signal quality, and more in real time Multi-Model Memory: Store up to 40 models with easy menu navigation Eight-Way End-Point Adjust, Adjustable LED Lighting, Dual Rates & Expo 📦 What’s Included (1) Futaba 4PM Plus Radio Transmitter (1) R304SB‑E Telemetry Receiver (1) Futaba Neo™‑T Stick (Right-hand) (2) Studio‑Style Recess Covers User Manual ⚙️ Specifications Feature Specification Range Full-range 2.4 GHz Channels 4 (expandable via mixing) Model Memory Up to 40 models User Interface High-contrast color screen Telemetry Compatible with S.Bus equipment Power 6x AA batteries or rechargeable Button Layout 6 customizable switches Elevate your control precision with Futaba’s trusted tech—perfect for the racer or enthusiast who demands tight response, full telemetry integration, and serious reliability. 🚀

Read more less

Unleash extreme power and efficiency with the Gens Ace Redline 2.0 2S LiHV 8500mAh 140C Battery. Engineered for competitive RC racing, this pack combines massive capacity, ultra-low internal resistance, and a high 140C discharge rate to deliver stable voltage, explosive acceleration, and unmatched endurance. Perfect for racers who demand consistent performance through the entire run. 🔥 Key Features: High Voltage (LiHV) 7.6V output for maximum speed and power 140C continuous discharge for exceptional punch and consistency 8500mAh capacity delivers long runtime and balanced weight Factory-matched cells for uniform voltage, capacity, and resistance Low IR design ensures stable voltage under heavy load 5mm bullet connectors provide secure, low-loss connections Built using stable automatic stacking technology for reliability Lightweight and low-profile design for chassis balance and fit 📐 Specifications: Nominal Voltage: 7.6V (2S LiHV) Capacity: 8500mAh Continuous Discharge: 140C Charge Rate: 1C (8.5A max recommended) Configuration: 2S1P Watt Hours: 64.4Wh Battery Connector: 5mm Bullet Balance Connector: 2mm Bullet Dimensions (L×W×H): 139 × 47 × 25mm Weight: 10.65oz (302g) ✅ Compatibility: Ideal for 1/10 & 1/8 scale surface applications Perfect for Team Associated, XRAY, TLR, Yokomo, and Schumacher racing platforms Works with Touring Car (TC6/TC7 series), 4WD Buggies, Truggies, and Short Course Trucks requiring 2S packs 📦 Includes: (1) Gens Ace Redline 2.0 2S LiHV 8500mAh 140C Battery (1) Set of 5mm Bullet Connectors ⚠️ Important Safety Information: Always balance charge using a LiPo-compatible charger and LiPo safe bag. Never leave charging batteries unattended. Do not overcharge or discharge below 3.2V per cell. Allow batteries to cool completely before recharging. Follow proper break-in procedure for new packs (first 5 cycles at 50% discharge). 🏎️ Recommended For: 1/10 & 1/8 scale Buggy, Truggy, Touring Car, and Short Course Truck racing Ideal for spec and modified classes needing high voltage and long runtime

Read more less

Experience uncompromising power and consistency with the Gens Ace Redline 2.0 2S Shorty LiHV Battery. Designed for high-performance racing, this pack delivers exceptional punch, low internal resistance, and stable voltage from start to finish. Perfect for 1/10 scale off-road, on-road, and touring applications where balance and efficiency are critical. 🔥 Key Features: High Voltage (LiHV) 7.6V design for increased power output 140C discharge rate for explosive acceleration and sustained punch 5300mAh capacity delivers both power and endurance Factory cell matching ensures maximum performance and consistency Low internal resistance (IR) for stable voltage under load Compact shorty pack size for ideal chassis weight distribution 5mm bullet connectors for secure, low-resistance connections Built with stable automatic stacking technology and strict cell matching Lightweight and low-profile design for racing efficiency 📐 Specifications: Nominal Voltage: 7.6V (2S LiHV) Capacity: 5300mAh Continuous Discharge: 140C Charge Rate: 1C (5.3A max recommended) Configuration: 2S2P Watt Hours: 40.28Wh Battery Connector: 5mm Bullet Balance Connector: 2mm Bullet Dimensions (L×W×H): 96 × 47 × 22.5mm Weight: 7.02oz (199g) ✅ Compatibility: Ideal for 1/10 scale off-road and on-road racing Perfect for Team Associated, XRAY, TLR, Yokomo, and Schumacher chassis setups Compatible with Touring Car (TC6/TC7) platforms and other vehicles using 2S shorty packs 📦 Includes: (1) Gens Ace Redline 2.0 2S Shorty LiHV 5300mAh 140C Battery (1) Set of 5mm Bullet Connectors ⚠️ Important Safety Information: Always use a LiPo-compatible charger — never charge unattended. Always balance charge and use a LiPo Safe charging bag. Do not overcharge, over-discharge, or store above 35°C. Allow battery to cool before recharging after use. For best cycle life: charge fully before first use and discharge only 50% for first 5 cycles. 🏎️ Recommended For: 1/10 Scale Buggy, Stadium Truck, Short Course Truck, and Touring Car racing Perfect balance of voltage, runtime, and punch for both spec and modified classes

Read more less

Optimize rear-end stability and durability with the RC10B6.2 Rear Hubs from Team Associated. Designed for high-performance racing, these molded composite hubs provide the perfect balance of strength, adjustability, and weight for 1/10 scale 2WD competition buggies. 🔥 Key Features: Molded composite construction for durability and weight savings Provides secure and precise fitment for rear axles and bearings Designed for high-performance rear suspension geometry Includes mounting locations for vertical ball stud height adjustments ✅ Compatibility: RC10B6.2 RC10B6.2D RC10B6.3 / B6.3D (backwards compatible) Also fits other B6-series vehicles with compatible rear hub geometry 📦 Includes: (1) Left Rear Hub (1) Right Rear Hub ⚠️ Note:Use with Team Associated’s tuning inserts and vertical ball stud hardware for full adjustability.

Read more less

Overview:Upgrade your suspension durability and precision with the Team Associated RC10B7 Aluminum Arm Mount "D Block". Machined from high-quality aluminum, this mount improves rigidity in the rear suspension assembly, keeping your hinge pins firmly aligned under heavy loads. It’s a race-proven upgrade that enhances consistency, handling, and longevity compared to the stock composite part. Features: CNC-machined aluminum construction for superior strength Maintains precise hinge pin alignment for consistent handling Blue anodized finish for durability and Factory Team looks Direct replacement upgrade for the stock “D Block” Genuine Team Associated Factory Team component Compatibility: Team Associated RC10B7 1/10 2WD Buggy May also fit other B7-based platforms (check manual for details) Includes: (1) Aluminum Arm Mount "D Block" Part Number: 92433 ⚡ Pro Tip: Combine the Aluminum Arm Mount "D Block" with the B7 Factory Team Arm Mount Inserts (92434) to unlock fine-tuned rear suspension geometry options.

Read more less

1up Racing Curved Glue Tips feature a steel tip which is easy to unclog for extended use. A single tip can last the life of a bottle of glue! Universal fit. For use with thin viscosity CA glue. Package includes ten tips.

Read more less

Keep your suspension tight and precise with the XRAY Suspension Pivot Pins. Manufactured from premium hardened steel, these pins are designed for maximum strength and long life while maintaining smooth suspension movement. Features: Precision-ground hardened steel construction Ensures smooth, slop-free suspension arm movement Designed to withstand the demands of racing Easy drop-in replacement part Includes: (2) Suspension Pivot Pins Compatibility: XRAY XB2 (2WD Buggy) XRAY XT2 (2WD Stadium Truck) XRAY XB4 (4WD Buggy) Other XRAY vehicles using this pivot pin size (check manual for exact fit)

Read more less

Boost your efficiency with the XRAY Slipper Eliminator Composite Spur Gear. Designed to work seamlessly with the XRAY Slipper Eliminator system, this 69T / 48 pitch spur gear offers reduced weight, smooth power transfer, and dependable durability. Made from XRAY’s premium composite material, it provides a perfect balance of strength and low rotational mass. Features: High-strength composite construction for maximum durability Lightweight design reduces drivetrain drag Precision molded for smooth and quiet operation Intended for use with the XRAY Slipper Eliminator Set Compatibility: XRAY XB2 – 1/10 2WD Buggy (all versions, check manual for gearing) XRAY XT2 – 1/10 2WD Stadium Truck (all versions, check manual for gearing) Part Number: 325869      

Read more less

Upgrade your drivetrain for maximum efficiency with the XRAY Slipper Eliminator LCG Ultra-Lightweight Set. Designed for serious racers, this setup completely eliminates the traditional slipper clutch, reducing rotating mass and delivering a more direct throttle response. Perfect for high-traction conditions where a slipper is not required. Features: Ultra-lightweight design reduces rotating mass for quicker acceleration LCG (Low Center of Gravity) construction enhances balance and stability Provides more consistent power transfer and improved efficiency Precision-machined for a perfect fit with XRAY driveline components Complete set includes everything needed for installation Compatibility: XRAY XB2 – 1/10 2WD Buggy (all versions, check manual for specifics) XRAY XT2 – 1/10 2WD Stadium Truck (all versions, check manual for specifics) Part Number: 324103  

Read more less

Fine-tune your XB2’s rear-end handling with the XRAY Short Rear Anti-Roll Bar series. Designed for precision adjustment, these sway bars control body roll and improve cornering stability, giving you the flexibility to adapt your buggy to any track condition. A softer bar provides more rear grip and smoother steering response, while a stiffer bar sharpens steering and reduces rear traction. Choose the perfect thickness to match your setup! Available Sizes: 1.0mm (323490) – Softest 1.1mm (323491) 1.2mm (323492) 1.3mm (323493) 1.4mm (323494) 1.6mm (323496) – Hardest Effects of Rear Roll Bar Changes: Softer Bar: Increases chassis roll Increases rear grip in corners Decreases on-power steering Car responds more slowly to direction changes Stiffer Bar: Decreases chassis roll Decreases rear grip in corners Increases on-power steering Car responds quicker to direction changes Features: High-quality spring steel construction Short design for precise handling response Essential tuning part for competitive setups Compatibility: XRAY XB2 (All Versions) Includes: (1) Short Rear Anti-Roll Bar (size selected)    

Read more less

The XRAY Composite Rear Upright (Lower Position – Graphite) is designed to provide precise handling and durability for your XB2/XB4. The lower roll center mounting gives improved cornering stability, making it an excellent choice for high-traction tracks where control and consistency are key. Features: Graphite composite material for maximum strength and rigidity Lower roll center mounting improves rear traction and stability Designed for high-traction surfaces and competitive setups Precision XRAY engineering ensures perfect fit and long life Compatibility: XRAY XB2 XRAY XB4 Includes: (1) Composite Rear Upright – Lower Position – Graphite

Read more less

Fine-tune your XB2 with this Graphite Composite Front Left Suspension Arm featuring Low Shock Mounting (LSM) geometry in the short configuration. The Graphite blend offers the perfect balance of rigidity and controlled flex, making it ideal for medium to high-traction tracks where precision and cornering speed are key. Features: Graphite composite material for optimized stiffness and responsiveness Low Shock Mounting (LSM) design improves suspension geometry and handling Short length design for sharper steering response Factory XRAY precision molding for perfect fit Compatibility: XRAY XB2 (All variants using LSM geometry) Includes: (1) Front Left Suspension Arm – Short – Graphite

Read more less

The XRAY XB2 Graphite Front Suspension Arm (Right, Short, Low Shock Mounting) is crafted from graphite composite material to deliver the perfect balance of strength, stiffness, and responsiveness. The short design improves steering response and corner speed, while the low shock mounting provides increased stability on high-traction tracks. Features: Graphite composite material for enhanced stiffness and precision Short design improves steering response and agility Low shock mounting (LSM) for greater stability and cornering performance Precision-molded factory replacement part Compatibility: XRAY XB2 (all versions, right side front lower short arm)

Read more less

The XRAY Composite 48P Slipper Eliminator Spur Gear is a precision-molded 72-tooth spur designed for racers who prefer maximum efficiency and direct power delivery. By eliminating the slipper assembly, this gear reduces rotating mass and ensures a more consistent throttle response, making it ideal for high-traction surfaces where a slipper is not required. Features: 48 pitch, 72-tooth composite spur gear Eliminates slipper clutch for direct drive efficiency Lightweight, precision-molded construction Delivers consistent throttle response Perfect for high-traction racing conditions Includes:(1) 72T Slipper Eliminator Spur Gear      

Read more less

The XRAY XB2 Composite Idler Gear is the direct replacement 25-tooth idler gear for the XB2 1/10 scale buggy. Precision molded for durability and smooth drivetrain operation, this gear keeps your XB2 running strong with consistent performance. Features: Genuine XRAY replacement part Composite construction for strength and low wear Smooth, efficient power transfer 25-tooth idler gear Compatibility: XRAY XB2 1/10 Buggy Includes: (1) 25T Composite Idler Gear  

Read more less

Maximize efficiency and longevity with the Team Associated RC10B7 Factory Team Bearing Set. Featuring high-quality sealed bearings, this upgrade reduces friction, improves drivetrain smoothness, and delivers long-lasting, trouble-free performance for competitive racing. Features: Premium sealed bearings for protection against dirt and debris Low-friction design for smoother, more efficient operation Factory Team quality for professional-level performance and durability Direct fit for the RC10B7 buggy Includes: (1) Complete Factory Team Bearing Set for RC10B7 A must-have upgrade for racers who want maximum drivetrain efficiency and reliability.

Read more less

Enhance steering precision and durability with the Team Associated Factory Team Aluminum Clamping Servo Horn. Designed for 23-tooth servos, this 15.5mm horn offers a secure clamping design to prevent slipping and maintain consistent steering response. Features: CNC-machined aluminum for maximum strength and precision Clamping design for a secure, slip-free fit 15.5mm length for precise steering geometry Fits 23T spline servos Factory Team quality for competition-level performance Includes: (1) Aluminum Clamping Servo Horn – 23T, 15.5mm Perfect for racers who demand reliable, high-performance steering control.

Read more less

🔥 Pure Performance in Every Joint.Step up your soldering game with PUREFUSION™—the elite, lead-free solder designed for high-performance RC, drone, and electronics work. This Sn99.3Cu0.7 alloy delivers ultra-low resistance, superior flow, and a clean, consistent melt for pro-level connections every time. 🧪 Specs: Alloy: Sn99.3Cu0.7 (Lead-Free) Diameter: 1.0mm Flux Core: Rosin, No-Clean Melting Point: ~227°C Conductivity: Optimized for high-current, low-loss joints Residue: Minimal & non-corrosive 🛠️ Includes: 15g compact travel tube – ideal for pit bags, toolboxes, and field kits 💡 Why PureFusion? Ultra-low oxidation Superior wetting & flow Designed for clean, professional results—no mess, no compromise 💥 Whether you're rewiring on the bench or fixing in the field, PUREFUSION keeps your connections solid and your builds clean.  

Read more less

💥 Domed for Performance. Bleeder for Precision.Upgrade your suspension with the TLR Aluminum G3 Domed Bleeder Shock Caps, engineered for racers who demand consistent damping, better landings, and refined tuning. These precision CNC-machined aluminum caps are lightweight, durable, and a direct fit for G3 shock bodies found in the 22 5.0 AC, DC, SR, Elite, and 22X-4 kits. 🔧 Features: Domed internal shape mimics Gen2 caps for better shock action Enhanced support and improved landing characteristics Integrated bleeder design allows precise, mess-free bleeding CNC-machined aluminum for strength without the weight Fits G3 shock bodies used in 22 5.0 & 22X-4 platforms 📦 Includes: (2) Domed Bleeder Shock Caps Bleeder screws and seals (pre-installed) 💪 Whether you’re dialing in for high traction or big jumps, these caps give your suspension the edge it needs to perform at its best.

Read more less

🛠️ Built to Handle the Power — Complete Drop-In DifferentialUpgrade or replace your worn-out diff with the TLR 22X AC Complete Gear Differential Set, precision-built for racers who demand maximum traction and bulletproof reliability. Pre-filled with 200,000cs diff fluid and ready to install, this complete assembly is the perfect performance refresh for your 22X platform. 🔧 What’s Inside: (1) Differential Case (2) Cross Pins (2) Outdrives (2) Sun Gears (4) Spider Gears (2) Pins (2) Gaskets (2) Washers (4) O-Rings (4) Button Head Screws (1) Bottle of 200,000cs Differential Fluid ✅ Compatibility:• Losi 22X• Losi 22X-T 🏁 Whether you’re prepping for race day or tuning for traction, this complete gear diff gets you dialed in fast!

Read more less

💥 Cut Weight. Gain Speed. Dominate the Track.The TLR 22X Titanium Slipper Top Shaft Screw is a small upgrade that delivers a big performance edge. Precision-machined from ultra-lightweight titanium, this screw weighs about 50% less than stock—reducing rotating mass and lowering the center of gravity for sharper handling, faster acceleration, and maximum on-track control. 🔧 Key Features: Ultra-lightweight titanium construction ~50% lighter than stock screw Reduces rotating mass for quicker response Lowers CG for improved stability and cornering Precision fit and finish Built for serious racing performance 📦 Includes: (1) Titanium Slipper Top Shaft Screw ✅ Compatibility:• Losi 22X• Losi 22X-T

Read more less

Upgrade your suspension with Team Losi Racing's 5.8mm Titanium Ball Studs. These precision-machined components are built from ultra-lightweight, high-strength titanium to deliver maximum performance with minimal weight—ideal for racers chasing every competitive edge. 🔧 Features: Machined from lightweight titanium for reduced weight Corrosion-resistant for long-lasting performance 5.8mm ball with 6mm thread length Hex-compatible head for easy installation and adjustment Perfect for fine-tuning suspension geometry under high loads 📦 Includes: (2) 5.8mm Titanium Ball Studs (6mm thread) ✅ Compatibility:• Losi 22X• Losi 22X-T

Read more less

Step up your racing game with these Stiffezel Front Suspension Arms for the TLR 22X! Engineered for high-performance racers, these arms provide increased stiffness and durability to enhance cornering, reduce flex, and maximize your control on high-bite tracks. 🔥 Features: Precision-engineered for the TLR 22X platform Stiffezel material delivers superior rigidity over stock arms Sharper steering response and enhanced high-speed handling Reduced flex = more precise suspension feel Perfect for traction-rich surfaces 📦 Includes:(2) Stiffezel Front Suspension Arms ✅ Compatibility:• TLR 22X• TLR 22X-4• TLR 22X-4 Elite• Losi 22S Sprint  

Read more less

Team Associated RC10T6.2 Carbon Fiber +1mm Steering Arm (2) – 71144Upgrade your steering precision with these lightweight +1mm carbon fiber arms from Team Associated. Originally made for the RC10T6.2, but may also fit newer models (check compatibility). ✅ Carbon Fiber Construction – Lightweight and durable✅ +1mm Offset – Provides fine-tuned steering response✅ Direct Replacement – Easy bolt-on upgrade 📦 Includes:(2) +1mm Carbon Fiber Steering Arms Perfect for racers looking to sharpen handling and dial in front-end feel.

Read more less

Reedy 95mm Y-Connector (Black) – ASC27170Need to split a signal or power connection without cluttering your build? The Reedy 95mm Y-Connector offers a clean and efficient solution for a wide range of RC applications. Whether you're programming your ESC, running dual servos, or powering fans, this cable gets the job done. 🧩 Applications: 🔧 ESC Programming – Connect both fan and programmer when only one port is available 🛞 Dual Servo Setups – Run two servos from a single receiver channel ✈️ Aircraft Control Surfaces – Great for setups using dual servos for torque or redundancy 📏 Length: 95mm🎨 Color: Black🔌 Compatible with most standard RC connectors OEM Part #: ASC27170 Let me know if you want a version with variant colors, upsells, or if you're batching all Reedy wires and connectors into a collection!    

Read more less