The Team Associated 3-Gear Gearbox Set is a genuine replacement assembly designed for the RC10B7, RC10T7, and RC10SC7 platforms. Built to factory specifications, this gearbox set ensures proper drivetrain alignment, durability, and smooth power delivery. Whether you're rebuilding after heavy track use or replacing damaged components, this 3-gear configuration maintains the performance and reliability expected from Team Associated race platforms. Features Genuine Team Associated replacement part 3-gear gearbox configuration Factory-fit for proper alignment and durability Maintains smooth and efficient power transfer Includes (1) 3-Gear Gearbox Set Compatibility Team Associated RC10B7 Team Associated RC10T7 Team Associated RC10SC7 A reliable drivetrain replacement to keep your buggy or truck performing at its best. 🏁    

Read more less

Step up your pit setup with the Sticky Kicks RC Works Team Bottle. Built with a clean brushed aluminum finish and a true factory look, this bottle is perfect for oils, cleaners, or detail fluids at the track or in the shop. The included atomizer spray cap delivers smooth, controlled application while keeping your pit area looking professional and organized. Works Team Bottle Benefits Brushed aluminum construction Clean, factory-style appearance Atomizer spray cap for even, controlled spray Ideal for pit or workshop use A simple, dialed pit accessory that adds function and style to any race setup. 🏁  

Read more less

The Avid Triad Direct Drive for the Team Associated B7 is designed for stock racers looking to eliminate the slipper clutch and reduce rotating mass for maximum drivetrain efficiency. By removing the entire clutch assembly, you get direct power transfer with zero slip (other than the differential), resulting in sharper throttle response and a more connected feel on high-grip tracks. Weighing just 6.45g with a 72T spur installed (2.62g without spur), this is one of the lightest direct drive systems available. 🔥 Why Run Direct Drive? Some stock racers prefer direct drive for: Reduced rotating mass Immediate throttle response Consistent power delivery Simplified drivetrain setup It’s not for every track or driver, but in the right conditions it can offer a competitive edge. ⚙️ Features Eliminates full slipper clutch assembly Ultra-lightweight design (6.45g w/ 72T spur) All-aluminum construction Custom M3x48 aluminum topshaft screw Clean, secure install Easy conversion back to slipper setup No loose slipper screws to maintain Works with Avid Triad spur gears 📦 Includes (1) Direct Drive Aluminum Plate (1) 69T Triad Spur (1) 72T Triad Spur (1) M3x48 Aluminum Screw (1) Aluminum Hat Bushing (1) Aluminum Cone Washer (1) M3 Ringer Aluminum Nut Note: Works with Avid Triad spur gears (spur not included unless specified in package). 🛠 Installation Use B6.1 Triad Direct Drive assembly instructions (installation is the same for the B7). ✅ Compatibility Team Associated B7 For racers chasing maximum efficiency and minimal rotating mass, the Triad Direct Drive keeps things light, simple, and race-focused. 🏁  

Read more less

Restore smooth, consistent shock performance with the Team Losi Racing G3 TiNi Shock Shaft, designed for precision damping and long-lasting durability. Featuring a 3mm diameter and 48.7mm length, this shaft uses a TiNi coating to reduce friction and wear for smoother shock action and extended service life. Ideal for rebuilds or routine maintenance, this shock shaft helps maintain consistent suspension performance under demanding race conditions. Features: G3 TiNi-coated shock shaft 3mm diameter x 48.7mm length Reduced friction for smoother shock operation Increased wear resistance and durability Precision-machined for consistent performance Includes: (1) Shock Shaft Part Number: TLR-1129

Read more less

Ensure proper spring alignment and smooth shock operation with the Team Losi Racing 13mm Shock Spring Cups. Designed specifically for the TLR 22X platform, these spring cups fit at the shock ends to securely locate the spring and maintain consistent suspension performance. Ideal for replacement during shock rebuilds or routine maintenance, these parts help keep your suspension working smoothly and reliably on race day. Features: Designed for 13mm shock springs Helps keep springs properly seated Maintains smooth and consistent suspension action Precision-fit replacement components Compatibility: Team Losi Racing 22X Includes: Shock Spring Cups Part Number: TLR-1119    

Read more less

Keep your drivetrain running smoothly with the Team Losi Racing Idler Gear Set, designed specifically for the TLR 22X platform. These gears provide reliable power transfer and are ideal for routine maintenance or replacing worn drivetrain components. Manufactured to Team Losi Racing standards, this idler gear set ensures consistent performance and durability under race conditions. Features: Precision-molded idler gears Maintains smooth and efficient drivetrain operation Durable construction for race use Direct replacement parts Compatibility: Team Losi Racing 22X Includes: (2) Idler Gears Part Number: TLR-1120  

Read more less

Strengthen your chassis and reduce front-end tweak with the Vision Racing (VR) Carbon Chassis Standoff Brace Set. Designed for carbon fiber chassis platforms, this upgrade adds rigidity where it matters most while keeping weight low and looks clean. Featuring dual-mounting aluminum standoffs, this brace helps stabilize the front section of the chassis under load, improving consistency and feel—especially on high-grip tracks and during hard landings. Features & Benefits: Reduces front-end chassis tweak Adds rigidity to carbon fiber chassis Dual-mount aluminum standoffs for strength and stability Lightweight, race-focused design Clean, stylish finish that complements carbon chassis builds Compatibility: Team Associated B7 Team Associated B7D Team Associated T7 Team Associated SC7 Includes: Carbon chassis standoff brace set with aluminum standoffs A solid first impression from Vision Racing—functional, clean, and built for racers looking to tighten up their chassis performance.  

Read more less

Upgrade or replace your steering hardware with the XRAY Composite Extended Steering Servo Arm Set. Designed for precision and durability, these servo arms provide a secure fit and consistent steering response for XRAY competition platforms. Manufactured from high-quality composite material, each arm is precision machined for accurate spline engagement and easy installation right out of the package. Features & Benefits: High-quality composite construction for strength and durability Extended design for precise steering geometry Precision machined for accurate spline fit Easy installation with consistent steering performance Compatibility: XRAY XB4 XRAY XT2 1/10 Dirt & Carpet Competition Buggy and Stadium Truck platforms Includes: (1) 23T servo arm (1) 25T servo arm A clean, reliable replacement set to keep your XRAY steering system tight and responsive on any surface.    

Read more less

Pivot Weight Overview:Dial in precise front-end balance with the Team Losi Racing 22X Brass Pivot Weight. This 5-gram tuning weight adds mass exactly where it matters most, helping improve stability, cornering consistency, and overall handling performance on the track. 🏁 About the Brass Pivot Weight Designed for racers who demand fine-tuned control, this brass pivot weight installs directly into any front pivot location. The added low-mounted mass lowers the center of gravity and enhances front-end weight distribution, resulting in improved steering response and chassis stability. It’s a simple, effective upgrade for dialing in your setup for changing track conditions. 🔧 Key Features Heavy brass construction Adds 5 grams of precisely placed weight Fits any front pivot location Lowers center of gravity Improves front-end balance and stability Enhances cornering consistency Quick and easy installation Ideal for fine-tuning race setups 📦 Includes (1) Brass Pivot Weight (5g) A must-have tuning option for competitive 22X racers looking to extract maximum performance through precise weight balance adjustments.  

Read more less

Restore strength and precision to the rear suspension of your 22X with the Team Losi Racing Carbon Fiber Rear Shock Tower. This standard replacement shock tower is designed specifically for the 22X 2WD buggy platform, delivering lightweight rigidity and consistent suspension performance. Features & Benefits: Carbon fiber construction for lightweight strength and durability Standard height replacement for factory rear suspension geometry Precision cut for accurate fit and reliable performance Compatibility: Team Losi Racing 22X 2WD Buggy Includes: (1) Carbon Fiber Rear Shock Tower Perfect for replacing worn or damaged parts while keeping your 22X race-ready  

Read more less

Upgrade your rear suspension with the Factory Team Aluminum Rear Hubs from Team Associated, designed for racers who demand precision, durability, and consistent handling. These CNC-machined aluminum hubs replace the standard plastic parts to deliver improved strength, better bearing support, and a true Factory Team look. About the Aluminum Rear Hubs Race-Focused Performance & GeometryThe -4mm offset fine-tunes rear track width to optimize suspension geometry, improving stability and cornering response—especially on high-grip or technical tracks. Precision machining ensures a direct, stress-free fit, while the anodized finish provides long-lasting wear resistance and a professional race aesthetic. Features CNC-machined aluminum construction Factory Team anodized finish -4mm offset for optimized rear geometry Improved bearing support and consistency Increased durability for competitive racing Includes (1) Left Rear Hub (1) Right Rear Hub (4) Set Screws Compatibility Team Associated RC10 B7 / B7D Team Associated RC10 B84 / B84D Team Associated RC10 SC7 Team Associated RC10 T7 Perfect for racers looking to sharpen rear-end feel, increase reliability, and add Factory Team style to their setup.  

Read more less

Standard or Lightweight The S2 buggy body from JConcepts is a race-proven shell engineered specifically for the Losi 22X (2025) platform. Born from elite competition and refined over years of development, the S2 delivers a low-profile, high-efficiency aerodynamic package for dirt, carpet, or turf. Precision-molded in clear polycarbonate, the S2 features a sleek, symmetrical design with purposeful airflow management to reduce drag and sharpen corner speed. Available in standard or lightweight thickness, it lets racers fine-tune durability versus weight to match track conditions. About the S2 Buggy Body Streamlined Style, Race-Ready PerformanceCAD-designed lines, a dual-window cab, recessed hood cooling area, and trimmable rear scoops work together to enhance airflow and downforce. A stabilizing center fin and rear side rails improve high-speed tracking and durability, while the body wraps cleanly around the spur gear guard for a perfect fit. Features Low-profile shape minimizes drag and boosts corner speed Trimmable rear sidepod scoops for airflow or added downforce Stabilizing center fin & rear side rails for durability and tracking Recessed hood area for cooling and airflow options Precision fit around the TLR spur gear guard Available in Standard or Lightweight materials Includes (1) TLR 22X “S2” 1/10 Buggy Body (Clear) (2) 6.5" Wings (Aero) (1) Decal Sheet (1) Window Masking Sheet Compatibility: Losi 22XTech Note: Painted body shown for illustration only. Product is clear and unpainted.  

Read more less

The Team Losi Racing TLR334076 VHA Hinge Pin Insert Set is an optional tuning pack designed for the 22 5.0 and select 22-series platforms. These inserts allow racers to fine-tune rear suspension geometry by adjusting hinge pin and axle height positions within the VHA system. Ideal for dialing in handling characteristics across different track conditions, this set is a must-have for racers running Variable Height Axle configurations. 🔧 Features Genuine Team Losi Racing option parts Designed for VHA (Variable Height Axle) tuning Allows precise rear suspension geometry adjustments Ideal for setup changes on varying track conditions Direct fit for compatible 22-series platforms 📦 Includes (6) VHA Hinge Pin Inserts ✅ Compatibility Losi 22 5.0 AC Losi 22 5.0 DC Losi 22 5.0 Elite Losi 22 5.0 SR Losi 22X Losi 22X-4 Losi 22X-4 Elite Losi 22X-T Losi TEN-SCTE 3.0

Read more less

Get fast, accurate temperature readings anywhere in your RC setup with the EcoPower Digital Infrared Temp Gauge — a lightweight, compact, non-contact tool designed specifically for RC motors, ESCs, nitro engines, batteries, chargers, and even track surfaces. Just aim, press, and read. Simple, precise, essential. Why Every RC Driver Needs This Gauge Monitoring temps is one of the easiest ways to protect your investment and improve performance. Electric Motors: Prevent demagnetization, wiring damage, and sensor failure — keep temps under ~170°F. ESCs: Avoid capacitor failure or internal board damage. Nitro Engines: Tune with confidence. Most engines like 230–270°F — anything over 290°F risks serious damage. Track Surface: Choose the right tire compound for the conditions. A temp gauge is one of the most important tools any RC racer, crawler, nitro driver, or basher can own. Features: Fast, accurate non-contact temperature readings Measures in °F or °C ±2°C precision for reliable tuning Built-in LED flashlight Data hold function Battery level indicator Ultra-compact & lightweight Includes: (1) EcoPower Digital Infrared Temp Gauge (2) AAA Batteries Specifications: Display: 1.0 × 0.74 in (26.8 × 18.8mm) Temperature Range: –58° to 500°F (–50° to 260°C) Working Temp: –0° to 50°C (–32° to 122°F) Response Time: 0.5 sec Weight: 2.29 oz (65g) Dimensions: 3.64 × 1.77 × 1.16 in (92.5 × 45 × 29.5mm)

Read more less

Unleash extreme power and efficiency with the Gens Ace Redline 2.0 2S LiHV 8500mAh 140C Battery. Engineered for competitive RC racing, this pack combines massive capacity, ultra-low internal resistance, and a high 140C discharge rate to deliver stable voltage, explosive acceleration, and unmatched endurance. Perfect for racers who demand consistent performance through the entire run. 🔥 Key Features: High Voltage (LiHV) 7.6V output for maximum speed and power 140C continuous discharge for exceptional punch and consistency 8500mAh capacity delivers long runtime and balanced weight Factory-matched cells for uniform voltage, capacity, and resistance Low IR design ensures stable voltage under heavy load 5mm bullet connectors provide secure, low-loss connections Built using stable automatic stacking technology for reliability Lightweight and low-profile design for chassis balance and fit 📐 Specifications: Nominal Voltage: 7.6V (2S LiHV) Capacity: 8500mAh Continuous Discharge: 140C Charge Rate: 1C (8.5A max recommended) Configuration: 2S1P Watt Hours: 64.4Wh Battery Connector: 5mm Bullet Balance Connector: 2mm Bullet Dimensions (L×W×H): 139 × 47 × 25mm Weight: 10.65oz (302g) ✅ Compatibility: Ideal for 1/10 & 1/8 scale surface applications Perfect for Team Associated, XRAY, TLR, Yokomo, and Schumacher racing platforms Works with Touring Car (TC6/TC7 series), 4WD Buggies, Truggies, and Short Course Trucks requiring 2S packs 📦 Includes: (1) Gens Ace Redline 2.0 2S LiHV 8500mAh 140C Battery (1) Set of 5mm Bullet Connectors ⚠️ Important Safety Information: Always balance charge using a LiPo-compatible charger and LiPo safe bag. Never leave charging batteries unattended. Do not overcharge or discharge below 3.2V per cell. Allow batteries to cool completely before recharging. Follow proper break-in procedure for new packs (first 5 cycles at 50% discharge). 🏎️ Recommended For: 1/10 & 1/8 scale Buggy, Truggy, Touring Car, and Short Course Truck racing Ideal for spec and modified classes needing high voltage and long runtime

Read more less

Power your race machine with the Reedy Zappers HV SG6 Ultra Low Profile 2S LiPo Battery. Built for the demands of competitive RC, this pack delivers lightning-fast discharge, superior voltage retention, and rock-solid durability to keep you at peak performance lap after lap. ✅ Ultra Low Profile Design – Lowers center of gravity for sharper handling✅ 135C High Discharge Rating – Delivers extreme power output for racing applications✅ Flat Discharge Curve – Maintains consistent voltage through the entire run✅ State-of-the-Art Chemistry – Reduced internal resistance and improved cycle life✅ Meets Racing Standards – Built to ROAR, EFRA, BRCA, and IFMAR specifications Includes: (1) Zappers HV SG6 2S Ultra Low Profile 135C LiPo Battery (7.6V/6000mAh) 5mm Bullet Connectors Specifications: Nominal Voltage: 7.6V (2S HV LiPo) Capacity: 6000mAh Maximum Charge Rate: 2C (12A) Discharge Rate: 135C Peak Cell Configuration: 2S2P Watt Hours: 45.6Wh Connector: 5mm Bullet (battery), 2mm Bullet (balance) Dimensions (LxWxH): 139 x 47 x 19.5mm (5.47 x 1.85 x 0.77in) Weight: 247g (8.71oz) ROAR Approved: Yes ⚡ Take your racing to the next level with reliable power, ultra-low profile design, and championship-ready performance.

Read more less

Fine-tune your XB2’s rear-end handling with the XRAY Short Rear Anti-Roll Bar series. Designed for precision adjustment, these sway bars control body roll and improve cornering stability, giving you the flexibility to adapt your buggy to any track condition. A softer bar provides more rear grip and smoother steering response, while a stiffer bar sharpens steering and reduces rear traction. Choose the perfect thickness to match your setup! Available Sizes: 1.0mm (323490) – Softest 1.1mm (323491) 1.2mm (323492) 1.3mm (323493) 1.4mm (323494) 1.6mm (323496) – Hardest Effects of Rear Roll Bar Changes: Softer Bar: Increases chassis roll Increases rear grip in corners Decreases on-power steering Car responds more slowly to direction changes Stiffer Bar: Decreases chassis roll Decreases rear grip in corners Increases on-power steering Car responds quicker to direction changes Features: High-quality spring steel construction Short design for precise handling response Essential tuning part for competitive setups Compatibility: XRAY XB2 (All Versions) Includes: (1) Short Rear Anti-Roll Bar (size selected)    

Read more less

The XRAY Composite Rear Upright (Lower Position – Graphite) is designed to provide precise handling and durability for your XB2/XB4. The lower roll center mounting gives improved cornering stability, making it an excellent choice for high-traction tracks where control and consistency are key. Features: Graphite composite material for maximum strength and rigidity Lower roll center mounting improves rear traction and stability Designed for high-traction surfaces and competitive setups Precision XRAY engineering ensures perfect fit and long life Compatibility: XRAY XB2 XRAY XB4 Includes: (1) Composite Rear Upright – Lower Position – Graphite

Read more less

The XRAY Composite Front Bridge Upper Deck provides extra rigidity and stability to your chassis setup. Precision-molded from high-quality composite material, this part is designed for strength without unnecessary weight, giving your buggy the perfect balance of performance and durability. Features: Molded composite construction for strength and consistency Helps increase front-end stability Lightweight design maintains optimal chassis flex Direct replacement part for quick installation Compatibility: XRAY XB2 (various years) XRAY XT2 (various years)

Read more less

The XRAY Differential Gasket Set is a must-have replacement pack for maintaining smooth, leak-free differential performance. Made from precision-cut, high-quality material, these gaskets create a perfect seal to keep diff oil where it belongs and extend the life of your drivetrain. Features: Precision fit to ensure consistent diff sealing High-quality material resists wear and compression Maintains smooth, reliable differential action Essential for regular maintenance and rebuilds Includes:(4) Differential Gaskets Compatibility: Fits XRAY differentials across multiple platforms (commonly used in XB2, XB4, XT4, and related models)

Read more less

The XRAY XB2 Front Inner Suspension Pivot Pins are precision-machined replacements built to handle the demands of competitive racing. Designed for strength and accuracy, these pins maintain exact suspension geometry for consistent handling and durability. Features: High-strength steel construction Precision fit for smooth suspension operation Maintains accurate geometry under load Direct replacement for the XB2 buggy Includes:(2) Front Inner Suspension Pivot Pins      

Read more less

The XRAY Composite 48P Slipper Eliminator Spur Gear is a precision-molded 72-tooth spur designed for racers who prefer maximum efficiency and direct power delivery. By eliminating the slipper assembly, this gear reduces rotating mass and ensures a more consistent throttle response, making it ideal for high-traction surfaces where a slipper is not required. Features: 48 pitch, 72-tooth composite spur gear Eliminates slipper clutch for direct drive efficiency Lightweight, precision-molded construction Delivers consistent throttle response Perfect for high-traction racing conditions Includes:(1) 72T Slipper Eliminator Spur Gear      

Read more less

Boost your steering accuracy and reliability with the Team Associated Factory Team Aluminum Clamping Servo Horn. Built for 23-tooth servos, this 20mm horn features a clamping design that locks securely in place, preventing slippage under high loads. Features: CNC-machined aluminum for superior strength and precision Clamping design ensures a secure, slip-free connection 20mm length for tuned steering leverage and response Fits 23T spline servos Factory Team quality for pro-level durability and performance Includes: (1) Aluminum Clamping Servo Horn – 23T, 20mm Ideal for racers who want maximum steering control and long-lasting reliability.

Read more less

Team Associated 4mm Factory Team Heavy Duty Titanium Ball Stud Set (2) (91750)Upgrade your RC ride with strength and precision! The Team Associated Factory Team 4mm Heavy Duty Titanium Ball Stud Set offers superior durability with lightweight performance. Perfect for high-stress suspension points where reliability matters most. Includes: (2) 4mm Heavy Duty Titanium Ball Studs Factory Team Quality — Trusted by Pros!

Read more less

Team Associated RC10 B6.2 CVA Axle (2) [91858] 🔧 Keep your ride tight and true! These Team Associated RC10 B6.2 CVA Axles are direct replacement parts designed to restore the performance and precision of your buggy's driveline. Whether you're rebuilding or just stocking up, these 2 high-quality axles are built to take the abuse of competitive 1/10 off-road racing. ✅ Compatible with B6.2 & B6.2D✅ Precision-machined for smooth drivetrain action✅ Sold in pairs Includes:(2) CVA Axles 📦 Part Number: 91858🏁 Brand: Team Associated

Read more less

  Upgrade your slipper clutch with the Team Associated 19mm Octalock Slipper Pad. Featuring the Octalock design, this pad offers improved consistency, smoother power delivery, and longer-lasting performance compared to standard slipper pads. ✅ Octalock Design – Delivers smoother engagement and improved slipper consistency✅ Durable Material – Built to handle high power and repeated use✅ Direct OEM Replacement – Genuine Team Associated part for perfect fitment Includes: (1) 19mm Octalock Slipper Pad Compatibility: Team Associated vehicles equipped with 19mm Octalock spur gears and slipper assemblies (B6.2, B6.3, B6.4, T6.2, T6.4, SC6.2, SC6.4, and B74 series) Check your manual for exact fitment Part #: 92288

Read more less

Team Associated RC10B7/RC10B7D Laydown Gearbox – Precision Replacement for 2WD Performance! 🔧 Keep your buggy in top form with this genuine replacement Laydown Gearbox Housing for the Team Associated RC10B7 and RC10B7D. Designed specifically for the 2WD platform, this gearbox delivers the durability, fit, and reliability you expect from Team Associated — straight from the Factory Team lineup. ⚙️ Key Features: ✅ Official Team Associated replacement part✅ Designed for laydown transmission configuration✅ Ensures proper gear mesh and alignment✅ Molded for durability and exact fitment✅ Ideal for maintenance, rebuilds, or spares 📦 Includes: (1) Laydown Gearbox Housing ✅ Compatibility: Team Associated RC10B7 Team Associated RC10B7D 💡 Maintain top-tier performance with factory-spec reliability.Team Associated—trusted by champions. 🏁🔩

Read more less

Team Associated RC10B7 Chassis [92400] 🛠️ Built to Battle, Ready to RaceRefresh your ride with the Team Associated RC10B7 Chassis — the factory replacement designed to get your buggy back in action and keep it dominating the track. Crafted for strength and performance, this is the exact chassis used on the legendary RC10B7 platform. ✅ Precision fit✅ Factory quality✅ Made to handle serious abuse Includes:(1) RC10B7 Chassis Part Number: 92400Compatibility: RC10B7 1/10 Buggy

Read more less

Pro-Motion Viper 2.2" Rear LP Carpet Buggy Tires (2) — C4 Red (Soft Compound)Part #: 3090-C4 Dialed for Grip. Designed to Win. The Pro-Motion Viper 2.2" Low-Profile (LP) Rear Buggy Tire is built for next-level performance on high-traction carpet and turf tracks. The LP carcass reduces sidewall flex for improved stability, while the directional tread with tapered mini pins delivers smooth, predictable traction. C4 Red compound brings the extra softness needed for maximum bite in low-grip or cooler conditions. ✅ Low-profile design for reduced flex and razor-sharp response✅ C4 Red soft compound optimized for maximum traction✅ Dual mini wedge edges + radial rib for stable, consistent grip✅ Directional tread for tunable performance✅ Ideal for modern carpet and turf racing 📦 Includes:(2) Viper 2.2" Rear LP Tires(2) Black Closed Cell Inserts 💡 Pro Tip: Run C4 in colder conditions or low-grip indoor tracks to bring your setup to life.

Read more less

Pro-Motion Viper 2.2" Rear LP Carpet Pre-Mount Buggy Tires (2) — Yellow (C3 Green/Medium)Part #: 3090-C3-Y Low-Profile Speed. Carpet-Tuned Control. Engineered for precision, the Pro-Motion Viper 2.2" LP Rear Buggy Tire is built to dominate on high-traction carpet and turf tracks. With a low-profile carcass for reduced sidewall flex and quicker response, the Viper delivers unmatched stability and cornering grip. Its tapered pin tread and directional radius pattern provide predictable traction, while mini wedges and a radial rib add versatility across various conditions. ✅ Pre-mounted on yellow wheels—ready to race✅ Low-profile carcass enhances response and stability✅ Tapered mini pin design for maximum grip✅ Directional tread for fine-tuned traction control✅ Designed for 1/10 scale carpet and turf racing✅ C3 compound for medium traction balance 📦 Includes:(2) Viper LP Rear Pre-Mounted Tires(2) Foam Inserts 💡 Pro Tip: Combine with Pro-Motion Slim Front LPs for a fully dialed-in carpet setup.

Read more less

Team Associated RC10 Factory Team 1.02 Gold Shock Shafts (2)PART: 6417 These Factory Team 1.02 Gold Shock Shafts are precision replacements for the original Team Associated RC10. Engineered for smooth shock action and durability, these shafts are a direct fit and deliver race-ready performance with signature gold coating. Includes: (2) 1.02 Gold Shock Shafts Compatibility: Team Associated RC10 (Original)  

Read more less

Team Associated 7.8x3.5x0.5mm Aluminum Hub Spacer Washers – Blue (10) – Part 31387Fine-Tune Wheelbase. Maximize Setup Precision. The Team Associated 7.8x3.5x0.5mm Blue Aluminum Hub Spacer Washers (31387) are perfect for adjusting wheelbase and tuning suspension geometry on vehicles with 3.5mm hinge pins. Commonly used on the RC8B3 and RC8T3 series, these lightweight spacers are also compatible with other platforms that accept 3.5mm hinge pins. ✅ Pack of 10 high-precision spacers✅ Size: 7.8mm OD x 3.5mm ID x 0.5mm thick✅ Blue anodized aluminum – lightweight and corrosion-resistant✅ Used for fine-tuning wheelbase and hub spacing✅ Compatible with RC8B3, RC8T3, and any vehicle using 3.5mm hinge pins✅ Also available in 1.0mm and 2.0mm thicknesses (sold separately) 📦 Includes: (10) 7.8x3.5x0.5mm Blue Aluminum Hub Spacer Washers Part #: 31387 💡 Pro Tip: Stack different thicknesses to get the exact rear end length or toe-in setup you're after.

Read more less