Team Associated RC10B7 Factory Team Aluminum Front Bulkhead (0°) Stronger. Straighter. Smarter. Upgrade your RC10B7’s durability and precision with the Factory Team Aluminum Front Bulkhead. Machined from high-quality aluminum with a zero-degree angle for optimal front-end geometry, this bulkhead is designed to withstand the rigors of competitive 1/10-scale racing. 🔧 Features: ✅ Factory Team Precision: CNC-machined aluminum for a tight, accurate fit ✅ Zero-Degree Angle: Delivers neutral front kick-up geometry ✅ Reinforced Design: Built to handle hard landings and aggressive racing ✅ Includes Set Screws: Complete package for quick installation 📦 Includes: (1) Aluminum Front Bulkhead (0°) (4) Set Screws 🔩 Compatibility: Team Associated RC10 B7 Team Associated RC10 B7D 💪 Built for racers who demand strength and precision at the front end.🛞 Factory Team quality — because your buggy deserves the best.

Read more less

Team Associated RC10B7 Top Shaft – Precision Replacement for Smooth Power Delivery! ⚙️ Keep your RC10B7 or RC10B7D drivetrain performing flawlessly with the Team Associated Top Shaft!This precision-machined replacement part is built to deliver smooth, reliable power transfer, helping maintain your buggy’s peak performance on race day. ✨ Key Features: ⚙️ Precision Machined Top Shaft – Ensures smooth and efficient drivetrain performance 🔧 Direct Replacement – Designed specifically for easy fitment in the RC10B7 and RC10B7D 🏁 Factory Team Reliability – Manufactured to meet Team Associated’s competition-grade standards 🛠️ Essential for Maintenance – Restore like-new drivetrain function after wear or damage 📦 Includes: ✔ (1) Top Shaft 📦 Compatibility: ✅ Team Associated RC10B7 ✅ Team Associated RC10B7D 📌 Note: 🔹 Use as a direct replacement for the stock top shaft.🔹 Recommended for racers looking to maintain drivetrain reliability and performance. 🏁 Maintain peak drivetrain efficiency with the Team Associated Top Shaft! 🔥 Smooth power, consistent performance — race ready with Factory Team precision!   

Read more less

Team Associated Differential Outdrive Shims (14pc) – RC10 B74 Precise Tuning for Your 4WD Drivetrain Optimize the fit and function of your RC10 B74 drivetrain with this Team Associated Differential Outdrive Shim Set. Designed as direct replacements for the kit-supplied parts, these precision shims allow you to fine-tune outdrive spacing and reduce slop for smoother, more efficient drivetrain performance. 🔧 Features: 🔩 Precision Tuning Parts – Designed to eliminate excess play in differential outdrives ⚙️ Direct Replacement – Ideal for use with the RC10 B74 1/10 4WD Buggy 🧷 Multiple Thicknesses – Mix and match to achieve perfect spacing 📦 Includes: (10) 0.1mm Outdrive Shims(4) 0.25mm Outdrive Shims COMPATIBILITY: Team Associated RC10 B74 OriginalTeam Associated RC10 B74.1Team Associated RC10 B74.1DTeam Associated RC10 B74.2Team Associated RC10 B74.2D

Read more less

1up Racing UltraLite 3 Wire Organizer – Clean Wiring, Zero Compromise ⚡ Tidy up your electronics like a pro with the 1up Racing UltraLite 3 Wire Organizer — the perfect blend of style and performance for your wiring setup. Whether you're refreshing your race rig or building from scratch, this lightweight aluminum organizer delivers a clean look without the bulk. 💨 At just 0.59g, it’s engineered to keep things neat without adding drag or weight, making it ideal for serious racers who care about every gram. ✨ Key Features: 🎯 Fits 12–14 AWG Wires – Compatible with wire diameters up to 4.1mm OD🪶 Featherweight Design – Weighs only 0.59g to keep your ride light and fast💎 Anodized Aluminum Finish – Durable, sleek, and track-ready🔌 Organized & Secure – Prevents tangled wires and boosts air circulation📐 Ultra-Clean Aesthetic – Show-quality wiring made easy 📦 What’s in the Box? ✔️ (1) UltraLite 3 Wire Organizer (Anodized Aluminum)

Read more less

JConcepts F2 Body for XRAY XB2 2024 (Standard Weight) – Includes Two 6.5" Wings🏁 Championship-Winning Design for Carpet, Turf, and Dirt Racing The JConcepts F2 body has become a go-to choice for top-tier performance in 1/10 scale off-road buggy racing. Now available for the XRAY XB2 2024, this body delivers a tight-fitting, aggressive layout with forward cab bias and aerodynamic enhancements, ready to take on any high-grip surface. The F2 shell integrates key design elements from the IFMAR World Champion platform, including chamfered side-pods, a louvered roof, and the unmistakable Finnisher "V" profile. Built to hug the chassis for a perfect fit, the body clears the spur gear guard and leaves room for performance parts while looking sharp on the track. 🎯 Key Features: Designed specifically for the XRAY XB2 2024 platform Original JConcepts F2 styling for performance and aesthetics Clear polycarbonate – standard thickness for balanced durability and flex Tight chassis fit with clean front-end coverage Louvered roof and rear kick-up stabilizer for enhanced downforce Double-step side-pods and Finnisher-inspired cab shape Built-in clearance for the spur gear guard Includes (2) 6.5" Carpet | Turf | Dirt Wings Comes with window masks and JConcepts decal sheet 📦 Includes: (1) F2 Clear Body for XRAY XB2 2024 – Standard Weight (2) 6.5" Wings (1) Window Mask Sheet (1) JConcepts Decal Sheet ⚠️ Note: Painted body shown for display purposes only. Product ships clear and untrimmed. Compatibility: XRAY XB2 2024 Carpet XRAY XB2 2024 Dirt

Read more less

NOVEMBER ’25 UPDATE: Now includes the 2-125726 High Torque Rotor.Note: The rotor installed in the motor will not have the red dot. Only the replacement 2-125726 rotor is marked. The R1WURKS V21-HD 17.5 was engineered through collaboration with top team drivers to deliver a stronger, more durable, race-focused powerplant. Built off the championship-proven V21-S platform, the HD version features a reinforced can and improved stator structure, offering increased durability without sacrificing speed or efficiency. A thicker 2-piece can design and a solid, one-piece front section with removable endbell make this motor ideal for racers who want smooth power, reliability, and consistent performance run after run. And yes — it’s ROAR Approved and ready for sanctioned racing. Key Features Updated heavy-duty design for improved durability Stronger can and stator construction vs. V21-S 2-piece motor design with thick front housing Removable endbell for easy service Includes 2-125726 High Torque Rotor (marked only on the spare rotor) Designed through collaboration with R1WURKS team drivers ROAR approved Why Racers Choose the V21-HD If you love the speed and smoothness of the V21-S but want a motor built to handle tougher conditions, higher temps, or longer race days, the V21-HD is the upgrade. It delivers reliable, repeatable power with the stronger construction serious racers appreciate.  

Read more less

Dial in your setup with absolute confidence! The 1UP Racing Pro Pit Scale delivers ultra-fine accuracy, making it the perfect tool for weighing parts, tires, diffs, hardware, and more. Whether you're chasing consistency, balancing components, or fine-tuning for race day, this compact powerhouse gives you the precision trusted by top-level racers. Engineered with a 0.01g resolution, 500g capacity, and a crisp blue backlit LCD, the Pro Pit Scale is built for serious tuning in any pit environment. A stainless steel weighing platform, laser-etched branding, and a protective cover complete the professional-grade feel. Key Features: ✔️ 0.01g Precision – High-resolution measurement for pro-level tuning✔️ 500g Capacity – Perfect for tires, diffs, hardware, and small components✔️ Stainless Steel Platform – Durable, stable, and easy to clean✔️ Blue Backlit LCD – Clear visibility in any lighting✔️ Laser-Etched 1UP Logos – Clean, premium aesthetic✔️ 9 Weighing Modes – Versatile for all hobby and workshop uses✔️ Full-Capacity Tare Range – Zero out trays or containers instantly✔️ Protective Cover & Parts Tray Included – Ready for pit bench or travel Includes: (1) 1UP Racing Pro Pit Scale (2) AA Batteries (1) Protective Cover / Parts Tray Specifications: Capacity: 500g (17.637oz) Resolution: 0.01g (0.00035oz) Overall Size: 5 × 4.17 × 0.74 in (127 × 106 × 19mm) Platform Size: 3.93 × 3.93 in (100 × 100mm)

Read more less

Upgrade your suspension precision with the AVID 13mm Ringer Shock Collar Kit, engineered to let you run 13mm springs on multiple shock platforms including Team Associated 13mm, TLR G3/3.5, and Schumacher LD3/L1R. Crafted for racers who demand accuracy and consistency, these collars feature offset laser-etched AVID logos that allow you to match spring tension left-to-right in clean ¼-turn increments. Machined with AVID’s signature silver ringer highlight, these collars not only perform—they look pro doing it. Features Compatible with 13mm springs across popular racing platforms Fits: AE 13mm, TLR G3/3.5, Schumacher LD3/L1R shock bodies Offset laser-etched AVID logos for easy visual alignment Allows perfect ¼-turn spring tension adjustments Internal o-ring design keeps collars firmly in place Signature silver ringer machining for premium finish Works great with AE V3, XRAY, and 1UP 13mm springs Tips Spring cups are not included.Recommended options:• AE 13mm Spring Cups – ASC91966• AE 12mm Spring Cups – ASC91814 (compatible with some setups) Includes (4) AVID 13mm Shock Collars (4) Internal O-Rings (pre-installed)  

Read more less

The Yeah Racing 60-Core High Current Servo Extension Wire is built for RC enthusiasts who demand reliable power delivery and signal integrity over longer distances. Perfect for rock crawlers, touring cars, or scale builds with extended chassis layouts, this heavy-duty extension lead ensures stable performance even under high-load conditions. ⚙️ Features: Designed for RC vehicles with remote servo placement 60-core wire construction supports high current servos Compatible with JR and Futaba-style connectors Provides a clean, secure wiring solution for custom builds Durable, flexible insulation resists wear and heat 📏 Specifications: Length: 150mm Connector Type: JR/Futaba Plug Wire Type: 60-core high-current cable 📦 Includes: (1) Yeah Racing 150mm 60-Core High Current Servo Extension Wire    

Read more less

The Reedy Pro Silicone Wire delivers the perfect balance of maximum power transfer, lightweight flexibility, and professional-grade durability. Constructed from ultra-fine, high-grade copper strands, this premium wire ensures efficient current flow for ESCs, motors, batteries, and charge leads alike. Its ultra-flexible silicone insulation allows clean routing through tight chassis layouts without sacrificing conductivity or protection. Whether you’re rewiring your race buggy, upgrading a basher, or building a clean custom setup, Reedy Pro wire is a must-have for serious RC builders. ⚙️ Features: 100% pure, ultra-fine copper strands for superior conductivity High-temp silicone insulation for maximum flexibility and heat resistance Lightweight and durable for racing or high-current applications Available in multiple gauges to suit various RC setups Ideal for motor, ESC, and battery wiring 📏 Specifications: Part Number: 694 Color: Black Gauge: 12 AWG Length: 1 Meter (3.28 ft) Material: Ultra-fine Copper with Silicone Insulation 📦 Includes: (1) 1 Meter Length of Reedy Pro Silicone Wire – 12 AWG (Black) 💡 Pro Tip:For a clean, professional finish, pair Reedy Pro Wire with Reedy Low-Resistance Bullet Connectors and heat-shrink tubing to minimize resistance and improve durability under race conditions.    

Read more less

⚙️ Quiet Strength. Precision-Engineered in the USA. The Avid RC Triad 72-Tooth Spur Gear delivers smooth, whisper-quiet performance and unbeatable strength — designed exclusively for the Avid Triad Slipper Clutch System. Each gear is made from Avid’s custom-blend, glass-free high-strength material, offering three times the impact resistance of Delrin while running noticeably quieter than traditional fiberglass-reinforced spurs. Perfectly balanced, true-spinning, and built to last — this is the gear serious racers trust. ⚡ Features: 🇺🇸 Made in the USA from Avid’s premium low-noise, high-strength composite (zero glass fibers) 🔇 Ultra-quiet operation with 3× the impact strength of Delrin 🌀 Precision 48-pitch tooth form ensures smooth, drag-free rolling 🎯 Center-point injection molded for perfect balance and true rotation — no wobble 🧩 Molded tooth count and setup indicators for easy identification and assembly 🔢 Marked with “1” and “2” for single- or dual-plate Triad clutch configuration 🧠 Designed exclusively for the Avid Triad Slipper Clutch System (Stock or Mod kits) 📏 Specifications: Pitch: 48P Tooth Count: 72T Compatibility: Avid Triad Slipper Clutch System Part Number: AV1020-72 Made in: USA 💡 Pro Tip:Use 72T for mid-range gearing — perfect balance between acceleration and top-end speed on most 1/10 2WD buggy and stadium-truck setups running a Triad slipper.  

Read more less

🏁 Built to Win – Engineered for Precision The Avid Truss 2.2 Rear Buggy Wheels bring next-level design and performance to your 1/10 scale race setup. Every detail is optimized for durability, torque strength, and visual appeal — featuring Avid’s unique concave face and reinforced truss hex structure for maximum power transfer and style. Whether you’re running high-grip carpet or smooth clay, these lightweight wheels deliver consistent performance lap after lap. ⚡ Features: 💪 Truss reinforcement at the hex ensures maximum torque strength and stability through hard corners 🧱 Concave vertical face protects wheel nuts and axles while adding sleek visual depth 🌀 Six internal ribs minimize rotating mass and resist fatigue under heavy load 🧩 Low-profile inner bead ribs allow tire foams to flex naturally for better landings ✨ Textured glue bead and tapered outer face ensure clean, secure tire mounting 🔩 Reinforced wheel-nut area withstands aggressive serrated nuts 🌬️ Oversized 4mm vent holes provide smooth airflow—no drilling needed ⚙️ Standard 2.2" fitment for universal buggy tires 💡 Lightweight at just 17.5g per wheel to reduce rotating mass and improve acceleration 📦 Includes: (4) Avid Truss 2.2 Rear Wheels – White 📏 Specifications: Outer Diameter: 2.2” Hex Depth: 3.5mm (Standard Offset) Weight: 17.5g each Fitment: 1/10 2WD & 4WD Buggy Rear Part Number: AV1110 💡 Pro Tip:Pair these with Avid Truss 2.2 Front Slim Wheels (AV1112) for a complete, balanced wheel setup that looks as sharp as it performs.  

Read more less

🏁 Precision. Strength. Style. The Avid Truss 2.2 Buggy Front Slim Wheels set a new standard for performance and durability in 1/10 buggy racing. Designed for racers who demand precision and style, these wheels feature Avid’s signature concave truss face, optimized rib structure, and lightweight build for superior handling and torque strength. ⚡ Features: 🧱 Truss reinforcement at the hex delivers maximum torque strength and prevents flex under load 💥 Concave vertical face protects axles and wheel nuts from track impacts while giving a premium polished look 🌀 Six internal ribs reduce rotating mass and increase structural rigidity 🧩 Low-profile inner bead ribs let the foam absorb impact for smoother landings 🔩 Reinforced wheel-nut area withstands aggressive serrated nuts ✨ Textured glue bead for stronger tire bonds and cleaner mounting 🌬️ 2.5mm vent holes allow perfect airflow – no drilling needed ⚙️ Standard 2.2” fit for all 1/10 scale buggies 🎨 Available in White or Yellow 📦 Includes: (4) Avid Truss 2.2 Front Slim Wheels 📏 Specifications: Outer Diameter: 2.2” Hex Depth: 2.0mm (Standard Offset) Fitment: 1/10 2WD Buggy Front (Slim Tires) Part Number: AV1112 💡 Pro Tip:Pair these with Avid 2.2 Rear Buggy Wheels and your favorite clay or carpet tires for a perfectly balanced setup that shines on-track and in the pits.    

Read more less

Clean Power. Pro-Level Charging. Simplify your pit setup and maximize efficiency with the Team Exalt 2S Specialized Bullet ProCharge Cable. Built for serious racers and hobbyists alike, this precision-crafted cable delivers a neat, reliable, and safe connection for 2S LiPo battery charging — combining high-quality materials with professional-grade durability. Pro-Grade Construction Each ProCharge cable is hand-assembled with 12AWG main charge leads and 18AWG balance leads, paired with 4mm bullet charger connectors and 5mm battery bullet plugs for low-resistance, high-efficiency power delivery. The braided PET sleeve and self-sealing shrink tubing keep your setup organized and protected, ensuring performance that looks as good as it runs. Features: Custom 2S ProCharge cable designed for 4mm charger to 5mm battery bullets 12AWG charge leads and 18AWG balance leads for consistent current flow 2mm balance plug to 3-pin XH connector for standard 2S LiPo compatibility Braided PET sleeve for a clean, organized look Self-sealing shrink tube for a secure, durable finish Reduces pit clutter while maintaining professional-grade reliability Safe, efficient, and visually clean charging solution Specifications: Spec Detail Charger Connector 4mm Bullet Battery Connector 5mm Bullet Balance Connector 2mm to 3-pin XH Main Leads 12AWG Balance Leads 18AWG Includes: (1) Team Exalt 2S Specialized Bullet ProCharge Cable Team Exalt — Sleek Design. Solid Power. Perfect Connection.

Read more less

Precision Fit. Proven Strength. Upgrade your suspension geometry with the Team Associated Factory Team Aluminum 3-Gear Gearbox Arm Mount “C” Block. Designed for the RC10B7, B7D, T7, and SC7 platforms, this CNC-machined aluminum mount provides superior strength, precise alignment, and long-lasting durability under the toughest racing conditions. Factory-Grade Performance Engineered to maintain suspension integrity and reduce flex, this aluminum “C” block ensures consistent handling through high-speed corners and rough landings. Whether you’re chasing podiums or fine-tuning setup precision, this component delivers the reliability and performance serious racers expect from Team Associated. Features: CNC-machined aluminum construction for maximum rigidity and precision fit Designed for 3-gear gearbox setups Improves consistency and handling through rough terrain Factory Team engineering for professional-grade reliability Direct replacement for stock “C” block Includes: (1) Aluminum 3-Gear Gearbox Arm Mount “C” Block Compatibility: Team Associated RC10 B7 Team Associated RC10 B7D Team Associated RC10 T7 Team Associated RC10 SC7 Team Associated Factory Team — Engineered to Win.

Read more less

Unleash extreme power and efficiency with the Gens Ace Redline 2.0 2S LiHV 8500mAh 140C Battery. Engineered for competitive RC racing, this pack combines massive capacity, ultra-low internal resistance, and a high 140C discharge rate to deliver stable voltage, explosive acceleration, and unmatched endurance. Perfect for racers who demand consistent performance through the entire run. 🔥 Key Features: High Voltage (LiHV) 7.6V output for maximum speed and power 140C continuous discharge for exceptional punch and consistency 8500mAh capacity delivers long runtime and balanced weight Factory-matched cells for uniform voltage, capacity, and resistance Low IR design ensures stable voltage under heavy load 5mm bullet connectors provide secure, low-loss connections Built using stable automatic stacking technology for reliability Lightweight and low-profile design for chassis balance and fit 📐 Specifications: Nominal Voltage: 7.6V (2S LiHV) Capacity: 8500mAh Continuous Discharge: 140C Charge Rate: 1C (8.5A max recommended) Configuration: 2S1P Watt Hours: 64.4Wh Battery Connector: 5mm Bullet Balance Connector: 2mm Bullet Dimensions (L×W×H): 139 × 47 × 25mm Weight: 10.65oz (302g) ✅ Compatibility: Ideal for 1/10 & 1/8 scale surface applications Perfect for Team Associated, XRAY, TLR, Yokomo, and Schumacher racing platforms Works with Touring Car (TC6/TC7 series), 4WD Buggies, Truggies, and Short Course Trucks requiring 2S packs 📦 Includes: (1) Gens Ace Redline 2.0 2S LiHV 8500mAh 140C Battery (1) Set of 5mm Bullet Connectors ⚠️ Important Safety Information: Always balance charge using a LiPo-compatible charger and LiPo safe bag. Never leave charging batteries unattended. Do not overcharge or discharge below 3.2V per cell. Allow batteries to cool completely before recharging. Follow proper break-in procedure for new packs (first 5 cycles at 50% discharge). 🏎️ Recommended For: 1/10 & 1/8 scale Buggy, Truggy, Touring Car, and Short Course Truck racing Ideal for spec and modified classes needing high voltage and long runtime

Read more less

Optimize rear-end stability and durability with the RC10B6.2 Rear Hubs from Team Associated. Designed for high-performance racing, these molded composite hubs provide the perfect balance of strength, adjustability, and weight for 1/10 scale 2WD competition buggies. 🔥 Key Features: Molded composite construction for durability and weight savings Provides secure and precise fitment for rear axles and bearings Designed for high-performance rear suspension geometry Includes mounting locations for vertical ball stud height adjustments ✅ Compatibility: RC10B6.2 RC10B6.2D RC10B6.3 / B6.3D (backwards compatible) Also fits other B6-series vehicles with compatible rear hub geometry 📦 Includes: (1) Left Rear Hub (1) Right Rear Hub ⚠️ Note:Use with Team Associated’s tuning inserts and vertical ball stud hardware for full adjustability.

Read more less

Fine-tune your XB2’s rear-end handling with the XRAY Short Rear Anti-Roll Bar series. Designed for precision adjustment, these sway bars control body roll and improve cornering stability, giving you the flexibility to adapt your buggy to any track condition. A softer bar provides more rear grip and smoother steering response, while a stiffer bar sharpens steering and reduces rear traction. Choose the perfect thickness to match your setup! Available Sizes: 1.0mm (323490) – Softest 1.1mm (323491) 1.2mm (323492) 1.3mm (323493) 1.4mm (323494) 1.6mm (323496) – Hardest Effects of Rear Roll Bar Changes: Softer Bar: Increases chassis roll Increases rear grip in corners Decreases on-power steering Car responds more slowly to direction changes Stiffer Bar: Decreases chassis roll Decreases rear grip in corners Increases on-power steering Car responds quicker to direction changes Features: High-quality spring steel construction Short design for precise handling response Essential tuning part for competitive setups Compatibility: XRAY XB2 (All Versions) Includes: (1) Short Rear Anti-Roll Bar (size selected)    

Read more less

The XRAY Composite Rear Upright (Lower Position – Graphite) is designed to provide precise handling and durability for your XB2/XB4. The lower roll center mounting gives improved cornering stability, making it an excellent choice for high-traction tracks where control and consistency are key. Features: Graphite composite material for maximum strength and rigidity Lower roll center mounting improves rear traction and stability Designed for high-traction surfaces and competitive setups Precision XRAY engineering ensures perfect fit and long life Compatibility: XRAY XB2 XRAY XB4 Includes: (1) Composite Rear Upright – Lower Position – Graphite

Read more less

Fine-tune your XB2 with this Graphite Composite Front Left Suspension Arm featuring Low Shock Mounting (LSM) geometry in the short configuration. The Graphite blend offers the perfect balance of rigidity and controlled flex, making it ideal for medium to high-traction tracks where precision and cornering speed are key. Features: Graphite composite material for optimized stiffness and responsiveness Low Shock Mounting (LSM) design improves suspension geometry and handling Short length design for sharper steering response Factory XRAY precision molding for perfect fit Compatibility: XRAY XB2 (All variants using LSM geometry) Includes: (1) Front Left Suspension Arm – Short – Graphite

Read more less

The XRAY XB2 Graphite Front Suspension Arm (Right, Short, Low Shock Mounting) is crafted from graphite composite material to deliver the perfect balance of strength, stiffness, and responsiveness. The short design improves steering response and corner speed, while the low shock mounting provides increased stability on high-traction tracks. Features: Graphite composite material for enhanced stiffness and precision Short design improves steering response and agility Low shock mounting (LSM) for greater stability and cornering performance Precision-molded factory replacement part Compatibility: XRAY XB2 (all versions, right side front lower short arm)

Read more less

Upgrade your XB2/XT2 with the XRAY Aluminum Front Roll-Center Holder. Machined from premium Swiss 7075 T6 aluminum, this precision part provides increased strength and reliability over stock composite. Designed to work with the bridge upper deck, it allows for fine roll-center tuning while improving overall front-end stability. Features: CNC-machined Swiss 7075 T6 aluminum construction Black anodized finish for durability and factory look Designed for use with the bridge upper deck system Allows precise roll-center adjustment Improves steering response and consistency Compatibility: XRAY XB2 (all versions) XRAY XT2 (all versions)

Read more less

The XRAY XB2 Front Inner Suspension Pivot Pins are precision-machined replacements built to handle the demands of competitive racing. Designed for strength and accuracy, these pins maintain exact suspension geometry for consistent handling and durability. Features: High-strength steel construction Precision fit for smooth suspension operation Maintains accurate geometry under load Direct replacement for the XB2 buggy Includes:(2) Front Inner Suspension Pivot Pins      

Read more less

The XRAY XB2 Composite Idler Gear is the direct replacement 25-tooth idler gear for the XB2 1/10 scale buggy. Precision molded for durability and smooth drivetrain operation, this gear keeps your XB2 running strong with consistent performance. Features: Genuine XRAY replacement part Composite construction for strength and low wear Smooth, efficient power transfer 25-tooth idler gear Compatibility: XRAY XB2 1/10 Buggy Includes: (1) 25T Composite Idler Gear  

Read more less

Enhance steering precision and durability with the Team Associated Factory Team Aluminum Clamping Servo Horn. Designed for 23-tooth servos, this 15.5mm horn offers a secure clamping design to prevent slipping and maintain consistent steering response. Features: CNC-machined aluminum for maximum strength and precision Clamping design for a secure, slip-free fit 15.5mm length for precise steering geometry Fits 23T spline servos Factory Team quality for competition-level performance Includes: (1) Aluminum Clamping Servo Horn – 23T, 15.5mm Perfect for racers who demand reliable, high-performance steering control.

Read more less

🛠️ Built to Handle the Power — Complete Drop-In DifferentialUpgrade or replace your worn-out diff with the TLR 22X AC Complete Gear Differential Set, precision-built for racers who demand maximum traction and bulletproof reliability. Pre-filled with 200,000cs diff fluid and ready to install, this complete assembly is the perfect performance refresh for your 22X platform. 🔧 What’s Inside: (1) Differential Case (2) Cross Pins (2) Outdrives (2) Sun Gears (4) Spider Gears (2) Pins (2) Gaskets (2) Washers (4) O-Rings (4) Button Head Screws (1) Bottle of 200,000cs Differential Fluid ✅ Compatibility:• Losi 22X• Losi 22X-T 🏁 Whether you’re prepping for race day or tuning for traction, this complete gear diff gets you dialed in fast!

Read more less

Upgrade your suspension with Team Losi Racing's 5.8mm Titanium Ball Studs. These precision-machined components are built from ultra-lightweight, high-strength titanium to deliver maximum performance with minimal weight—ideal for racers chasing every competitive edge. 🔧 Features: Machined from lightweight titanium for reduced weight Corrosion-resistant for long-lasting performance 5.8mm ball with 6mm thread length Hex-compatible head for easy installation and adjustment Perfect for fine-tuning suspension geometry under high loads 📦 Includes: (2) 5.8mm Titanium Ball Studs (6mm thread) ✅ Compatibility:• Losi 22X• Losi 22X-T

Read more less

Keep your 22X buggy in race-ready condition with this Rear Wing Mount & Front Bumper Set. Designed for durability and fit, this OEM replacement set includes everything you need to restore or upgrade the rear wing assembly and front bumper of your TLR 22X platform. 🛠️ Features: OEM fit and finish for the TLR 22X series Includes full wing mounting hardware and front bumper Built for strength and stability under race conditions 📦 Includes: (1) Front Bumper (2) Rear Wing Mounts (2) Rear Wing Braces (2) Rear Wing Spacers ✅ Compatibility:• Losi 22X• Losi 22X-T

Read more less

Keep your TLR rig dialed in with this genuine 5.8mm Rod Ends Set for the 22X series. Whether you’re replacing worn parts or stocking your pit box, these rod ends are built to deliver precise fit and reliable durability on the track. 🔧 Features: Direct replacement for TLR 22X series vehicles High-strength material for long-lasting performance Perfect fit for your steering and suspension linkage needs 📦 Includes:(1) Complete 5.8mm Rod Ends Set ✅ Compatibility:• Losi 22X• Losi 22X-T  

Read more less

Step up your racing game with these Stiffezel Front Suspension Arms for the TLR 22X! Engineered for high-performance racers, these arms provide increased stiffness and durability to enhance cornering, reduce flex, and maximize your control on high-bite tracks. 🔥 Features: Precision-engineered for the TLR 22X platform Stiffezel material delivers superior rigidity over stock arms Sharper steering response and enhanced high-speed handling Reduced flex = more precise suspension feel Perfect for traction-rich surfaces 📦 Includes:(2) Stiffezel Front Suspension Arms ✅ Compatibility:• TLR 22X• TLR 22X-4• TLR 22X-4 Elite• Losi 22S Sprint  

Read more less

Team Associated RC10T6.2 Carbon Fiber +1mm Steering Arm (2) – 71144Upgrade your steering precision with these lightweight +1mm carbon fiber arms from Team Associated. Originally made for the RC10T6.2, but may also fit newer models (check compatibility). ✅ Carbon Fiber Construction – Lightweight and durable✅ +1mm Offset – Provides fine-tuned steering response✅ Direct Replacement – Easy bolt-on upgrade 📦 Includes:(2) +1mm Carbon Fiber Steering Arms Perfect for racers looking to sharpen handling and dial in front-end feel.

Read more less

Team Associated 4mm Factory Team Heavy Duty Titanium Ball Stud Set (2) (91750)Upgrade your RC ride with strength and precision! The Team Associated Factory Team 4mm Heavy Duty Titanium Ball Stud Set offers superior durability with lightweight performance. Perfect for high-stress suspension points where reliability matters most. Includes: (2) 4mm Heavy Duty Titanium Ball Studs Factory Team Quality — Trusted by Pros!

Read more less

Team Associated 13mm Front Shock Spring. These optional springs are intended for the Team Associated B6.4D and the B6.4. Package includes two springs. Effects of Shock Spring Changes  Shock Spring  Characteristic  Softer Increased Chassis Roll Increased Traction Better in Bumpy Conditions More Likely to Bottom Out  Stiffer Decreased Chassis Roll Decreased Traction Increased Responsiveness COMPATIBILITY: Team Associated RC10 B74.2Team Associated RC10 B74.2DTeam Associated RC10B6.4Team Associated RC10B6.4D

Read more less

Stronger. Stiffer. Race-Ready. Upgrade your steering and camber links with the Team Associated 3.5x48 mm Steel Turnbuckles — a precision-built Factory Team option for racers who demand maximum strength and reliability. Perfect for high-stress race conditions, these heavy-duty steel links add confidence to every corner and landing. Performance Upgrade Designed to replace standard turnbuckles on the RC10B6, RC10T6, and RC10SC6 platforms, this 3.5 mm version provides added stiffness and durability when used with 3.5 mm ballcups (92308). The result is tighter handling, smoother steering response, and reduced flex over time — a must-have for competitive racers and bashers alike. Features: Heavy-duty 3.5 mm steel construction for extreme strength Increased stiffness for consistent steering geometry Works with 3.5 mm ballcups (#92308) Ideal upgrade for high-traction and high-impact racing Factory Team precision fit and finish Includes: (2) 3.5 × 48 mm Steel Turnbuckles Compatibility: Team Associated RC10 B6 series Team Associated RC10 T6 series Team Associated RC10 SC6 series Team Associated Factory Team — Engineered to Win.

Read more less

Team Associated RC10B7 HD CVA Bone (2) (69mm) [92454] 💥 Heavy Duty for Heavy HitsBuilt to handle the heat of hardcore racing, these 69mm HD CVA Bones are the perfect upgrade or replacement for your RC10B7 or B7D. Designed for durability and smooth power transfer, they’ll keep your buggy ripping lap after lap. 🔧 Upgrade Highlights:✅ Heavy-duty design for increased strength and longevity⚙️ 69mm length—direct fit for RC10B7/B7D🛠️ Precision-machined for consistent performance 📦 Includes:(2) 69mm HD CVA Bones 🔩 Part Number: 92454🚗 Compatible With: Team Associated RC10B7 Team Associated RC10B7D

Read more less

Pro-Motion Viper 2.2" Rear LP Carpet Pre-Mount Buggy Tires (2) — Yellow (C3 Green/Medium)Part #: 3090-C3-Y Low-Profile Speed. Carpet-Tuned Control. Engineered for precision, the Pro-Motion Viper 2.2" LP Rear Buggy Tire is built to dominate on high-traction carpet and turf tracks. With a low-profile carcass for reduced sidewall flex and quicker response, the Viper delivers unmatched stability and cornering grip. Its tapered pin tread and directional radius pattern provide predictable traction, while mini wedges and a radial rib add versatility across various conditions. ✅ Pre-mounted on yellow wheels—ready to race✅ Low-profile carcass enhances response and stability✅ Tapered mini pin design for maximum grip✅ Directional tread for fine-tuned traction control✅ Designed for 1/10 scale carpet and turf racing✅ C3 compound for medium traction balance 📦 Includes:(2) Viper LP Rear Pre-Mounted Tires(2) Foam Inserts 💡 Pro Tip: Combine with Pro-Motion Slim Front LPs for a fully dialed-in carpet setup.

Read more less