Keep your suspension tight and precise with the XRAY Suspension Pivot Pins. Manufactured from premium hardened steel, these pins are designed for maximum strength and long life while maintaining smooth suspension movement. Features: Precision-ground hardened steel construction Ensures smooth, slop-free suspension arm movement Designed to withstand the demands of racing Easy drop-in replacement part Includes: (2) Suspension Pivot Pins Compatibility: XRAY XB2 (2WD Buggy) XRAY XT2 (2WD Stadium Truck) XRAY XB4 (4WD Buggy) Other XRAY vehicles using this pivot pin size (check manual for exact fit)

Read more less

Dial in the perfect rear suspension setup with the XRAY 57.5mm Big Bore Rear Conical Spring Set. These precision-engineered springs are designed for XRAY big-bore rear shocks, giving you the flexibility to tune your buggy or stadium truck’s handling to match any track condition. Each spring is color-dot coded from soft (1-Dot) to stiff (5-Dot) for quick identification. Features: Set includes (2) precision-made conical rear springs 57.5mm length, built for XRAY big-bore rear shocks Dot-coded system for easy rate identification Softer springs provide more traction and bump absorption Stiffer springs increase stability and sharpen handling response Spring Rates (Softest → Hardest): 1-Dot – Part #368481 2-Dot – Part #368482 3-Dot – Part #368483 4-Dot – Part #368484 5-Dot – Part #368485 Effects of Shock Spring Changes: Softer: More chassis roll, more rear traction, better bump compliance, but more bottoming out. Stiffer: Less chassis roll, reduced rear traction, quicker response, more stability in high grip. Compatibility: XRAY XB2 – 1/10 2WD Buggy (Rear) XRAY XT2 – 1/10 Stadium Truck (Rear) Other XRAY 57.5mm big-bore rear shock applications (check manual for confirmation).

Read more less

Fine-tune your suspension with the XRAY 42.5mm Big Bore Front Conical Spring Set. Designed for big-bore shocks, these precision-engineered springs allow you to dial in your buggy or stadium truck’s handling for any track condition. Each spring is color-dot coded for quick identification, ranging from soft (1-Dot) to firm (5-Dot). Features: Set includes (2) precision-made conical front springs 42.5mm length, designed for XRAY big-bore shocks Dot-coded system for quick rate identification Softer springs increase traction and absorb bumps Stiffer springs increase responsiveness and reduce chassis roll Spring Rates (Softest → Hardest): 1-Dot – Part #368381 2-Dot – Part #368382 3-Dot – Part #368383 4-Dot – Part #368384 5-Dot – Part #368385 Effects of Shock Spring Changes: Softer: More chassis roll, more traction, smoother on bumps, but more prone to bottoming out. Stiffer: Less chassis roll, less traction, sharper response, improved handling in high grip. Compatibility: XRAY XB2 – 1/10 2WD Buggy (Front) XRAY XT2 – 1/10 Stadium Truck (Front) Other XRAY 42.5mm big-bore front shock applications (check manual for confirmation).

Read more less

Upgrade your XB2/XT2 with the XRAY Aluminum Steering Arm set, precision-machined from Swiss 7075 T6 aluminum for maximum strength and durability. Designed specifically for use with the 1-piece chassis, these arms deliver consistent, slop-free steering performance. Features: CNC-machined Swiss 7075 T6 aluminum Black anodized finish for style and protection Provides ultra-precise steering feel Direct fit for XRAY 1-piece chassis design Includes left and right aluminum arms (2) Compatibility: XRAY XB2 (’21 onwards with 1-piece chassis) XRAY XT2 (’21 onwards with 1-piece chassis) Includes: (2) Aluminum Steering Arms

Read more less

Enhance steering precision and durability with the Team Associated Factory Team Aluminum Clamping Servo Horn. Designed for 23-tooth servos, this 15.5mm horn offers a secure clamping design to prevent slipping and maintain consistent steering response. Features: CNC-machined aluminum for maximum strength and precision Clamping design for a secure, slip-free fit 15.5mm length for precise steering geometry Fits 23T spline servos Factory Team quality for competition-level performance Includes: (1) Aluminum Clamping Servo Horn – 23T, 15.5mm Perfect for racers who demand reliable, high-performance steering control.

Read more less

🛠️ Built to Handle the Power — Complete Drop-In DifferentialUpgrade or replace your worn-out diff with the TLR 22X AC Complete Gear Differential Set, precision-built for racers who demand maximum traction and bulletproof reliability. Pre-filled with 200,000cs diff fluid and ready to install, this complete assembly is the perfect performance refresh for your 22X platform. 🔧 What’s Inside: (1) Differential Case (2) Cross Pins (2) Outdrives (2) Sun Gears (4) Spider Gears (2) Pins (2) Gaskets (2) Washers (4) O-Rings (4) Button Head Screws (1) Bottle of 200,000cs Differential Fluid ✅ Compatibility:• Losi 22X• Losi 22X-T 🏁 Whether you’re prepping for race day or tuning for traction, this complete gear diff gets you dialed in fast!

Read more less

Keep your 22X buggy in race-ready condition with this Rear Wing Mount & Front Bumper Set. Designed for durability and fit, this OEM replacement set includes everything you need to restore or upgrade the rear wing assembly and front bumper of your TLR 22X platform. 🛠️ Features: OEM fit and finish for the TLR 22X series Includes full wing mounting hardware and front bumper Built for strength and stability under race conditions 📦 Includes: (1) Front Bumper (2) Rear Wing Mounts (2) Rear Wing Braces (2) Rear Wing Spacers ✅ Compatibility:• Losi 22X• Losi 22X-T

Read more less

Team Associated 13mm Front Shock Spring (Blue/4.80lbs) (54mm) [71162] 🚀 Soak up the bumps. Stick the landing. These 13mm Front Shock Springs are built for serious performance on your T6.2 or SC6.2 when upgraded to 13mm shocks. With a 4.80 lb/in rate and 54mm length, they strike the perfect balance—soft enough for buttery-smooth cornering, firm enough to eat up big landings. Upgrade your front-end feel and dial in that confidence. 🔥 Features:✅ Blue rate: 4.80 lbs/in✅ Length: 54mm✅ Perfect for 13mm shocks✅ Great low-speed feel + high-speed support✅ Includes 2 springs 📦 Part Number: 71162🏁 Brand: Team Associated

Read more less

Team Associated RC10T6.4 Carbon Front Shock Tower (Gullwing Arm) [71157] 💥 Precision. Strength. Performance. Upgrade your RC10T6.4 with the Carbon Front Shock Tower, specifically designed for use with gullwing arms (ASC71138). Made from high-quality carbon fiber, this shock tower delivers the perfect blend of lightweight performance and ultra-durable strength—keeping your rig responsive and track-ready. 🔥 Features:✅ Precision-cut carbon fiber for maximum durability✅ Lightweight design improves handling and suspension response✅ Compatible with gullwing arms (ASC71138)✅ Direct replacement for easy install 📦 Part Number: 71157🏁 Brand: Team Associated

Read more less

The Team Associated Factory Team B6 19mm Octalock LCF Slipper Pad is compatible with the Octalock spur gears. This design was debuted with the RC10B74.1 buggy, and are a great way to upgrade the transmission in your B4/B5/B6 series buggy or truck.  

Read more less

Pro-Motion 2.2" Rear Buggy Wheels (4)Available in White (3050-W) or Yellow (3060-Y) Engineered for Speed. Built to Dominate. Give your buggy the winning edge with Pro-Motion’s 2.2" Rear Wheels, designed for today's high-traction tracks. These wheels feature a reinforced inner rib structure for added durability without the weight penalty. The lightweight design and precision molding ensure a true, balanced rotation—exactly what you need for consistent traction and razor-sharp control. ✅ Fits most 1/10 scale buggies with 2.2" rear wheels✅ Lightweight inner rib design for enhanced strength✅ High-durability construction for racing abuse✅ Built-in vent holes reduce tire distortion✅ Available in sleek White or Fluorescent Yellow 📦 Includes:(4) 2.2" Rear Buggy Wheels 💡 Pro Tip: Match with Pro-Motion front wheels for a full performance setup that looks as good as it drives.

Read more less

Team Associated 12mm Blue Aluminum Shock Bushings (4) – Part 91816Precision Fit. Race-Proven Durability. The Team Associated 12mm Blue Aluminum Shock Bushings (91816) are high-quality replacements designed for enhanced suspension performance and long-lasting durability. Perfect for demanding race setups, these bushings are crafted from lightweight anodized aluminum to maintain alignment and reduce play in the shock mounting. ✅ Fits 12mm shock mount applications on select Team Associated vehicles✅ CNC-machined from high-grade aluminum for strength and precision✅ Anodized blue for a sleek, professional finish✅ Reduces slop and enhances suspension consistency✅ Upgraded alternative to plastic bushings 📦 Includes: (4) 12mm Blue Aluminum Shock Bushings Part #: 91816 💡 Pro Tip: Use with matching shock components for maximum suspension precision and race-level performance.

Read more less

Team Associated 10mm Blue Aluminum Shock Bushings (4) – Part 91815Lightweight. Durable. Precision-Tuned. The Team Associated 10mm Blue Aluminum Shock Bushings (91815) are precision-machined replacements designed to improve durability and reduce slop in your shock mounting setup. These aluminum bushings offer a secure, high-performance fit and are a direct upgrade over stock plastic bushings. ✅ Fits 10mm shock mounts on various Team Associated vehicles✅ Machined from lightweight, high-strength aluminum✅ Anodized blue for a clean factory look✅ Improves durability and shock alignment✅ Direct replacement for worn or damaged bushings 📦 Includes: (4) 10mm Blue Aluminum Shock Bushings Part #: 91815 💡 Pro Tip: Swap out plastic bushings with these for a tighter, more responsive suspension feel—especially under race conditions.  

Read more less

🔌⚡ Power Multiple Components with One Reliable Connection The Yeah Racing 60-Core Y-Harness High Current Servo Extension Lead is a durable, high-quality splitter cable designed to power or control two compatible components from a single receiver port. Featuring one male and two female JR/Futaba-style connectors, this 150mm Y-harness is ideal for servos, LEDs, gyros, and other RC electronics. Built with high-strand-count 60-core wire and an injection-molded Y-split protector, it delivers dependable performance while keeping your wiring neat and organized. 🔌 About the High Current Y-Harness ⚡ Built for High Current Applications Constructed with premium 60-core wire, this extension lead supports reliable power delivery and stable signal transmission for demanding RC electronics. 🔧 Split One Connection into Two The Y-harness allows two compatible devices to share a single receiver output, making it ideal for dual servos, lighting systems, gyros, and other accessories. 💪 Durable Molded Construction An injection-molded Y-split protector strengthens the cable at its most vulnerable point while providing a clean, professional appearance. 🧹 Clean & Organized Wiring The 150mm cable length offers flexibility while helping keep wiring tidy inside your RC vehicle, boat, or aircraft. 🔧 Features ✔ One male to two female JR/Futaba-style connectors✔ Premium 60-core wire for high current capability✔ Stable power and signal distribution✔ Injection-molded Y-split protector for added durability✔ Ideal for servos, LEDs, gyros, and other RC electronics✔ Helps maintain clean, organized wiring✔ 150mm cable length✔ Black finish 📦 Includes (1) Yeah Racing 60-Core Y-Harness High Current Servo Extension Lead (150mm) 📊 Specifications Specification Details Connector Type JR/Futaba Style Configuration 1 Male to 2 Female Cable Length 150mm Wire Type 60-Core High Current Wire Color Black 🚗 Compatibility Compatible with RC electronics using JR/Futaba-style servo connectors, including: Servos LED lighting systems Gyros Other compatible receiver-powered accessories Always verify connector type and current requirements before installation. ⚠️ Notes Designed for use with JR/Futaba-style connectors. Ideal for splitting a single receiver output between two compatible devices. Verify that your receiver and power system can safely support the combined current draw of connected accessories before use.

Read more less

  Tape Set Overview:This is a replacement hook & loop tape set designed for securing bodies on Team Losi Racing platforms. It provides a simple and reliable way to mount and hold your body in place. 🔧 Key Features ✔ Hook & loop mounting system✔ Helps secure body panels✔ Easy to apply and replace✔ Direct replacement set 📦 Includes (8) Hook Side Tabs (10x20mm) (8) Loop Side Tabs (10x20mm)

Read more less

Upgrade your TLR 22X with the Aluminum Narrow Steering Spindles (2°), engineered for racers seeking precise steering response, improved durability, and consistent performance across varying track conditions. The narrow configuration provides refined steering characteristics suited for specific setup needs and tuning preferences. Precision CNC machined from high-strength 7075 aluminum, these spindles deliver exceptional strength and impact resistance while maintaining lightweight performance. The black anodized finish with chamfered edges enhances durability and corrosion resistance while giving your build a clean, factory race appearance. Features 2° narrow steering spindle configuration CNC machined for precise fit and finish Constructed from high-strength 7075 aluminum Black anodized for added durability Chamfered edges for a premium look Improves steering precision and stability Lightweight yet highly durable design Direct upgrade for TLR 22X platforms Includes (2) Aluminum Narrow Steering Spindles (Black, 2°) A race-focused steering upgrade designed to sharpen handling and increase front-end durability on the TLR 22X platform. 🏁    

Read more less

Fine-tune your track width and lock in wheel reliability with the Team Losi Racing 22X Aluminum 12mm Wheel Hex set. Precision-machined from ultra-lightweight, rigid aluminum, these hexes deliver strength and durability without adding unnecessary rotating weight. The clamp-style design provides a secure, slip-resistant fit on the axle, helping eliminate wheel wobble and improving consistency under acceleration and heavy cornering loads. Finished with a durable anodized coating, these hexes resist corrosion while giving your 22X that clean, pro-level race look. Laser-etched size markings make quick setup changes easy at the track, and the included axle pins ensure straightforward installation. The 7mm thickness option allows precise tuning of track width and handling characteristics to match surface conditions and driving style. Features: Strong, lightweight aluminum construction Clamp-style design for secure axle fit Anodized finish for durability and corrosion resistance Laser-etched size markings for quick identification Includes axle pins for easy installation 7mm thickness for precise track width tuning Includes: (2) Aluminum 12mm Wheel Hex (7mm) Built for serious racers who demand precision, durability, and consistent performance from their TLR 22X platform.

Read more less

Add front-end stability and cooling performance to your race build with the Team Losi Racing 22X Front Low Wing & Fan Mount Set. Designed specifically for the 22X 2WD buggy platform, this set helps improve aerodynamic balance while providing a secure mounting solution for your motor cooling fan. The front low wing increases front downforce, helping improve steering feel and consistency on high-speed sections and high-grip surfaces. Paired with the included fan mount, this setup supports better motor cooling during long mains and hot race days, keeping performance consistent from start to finish. Whether you're refreshing worn components or dialing in your race setup, this is a must-have replacement for competitive 22X racers. Features: Genuine TLR replacement parts Improves front-end stability and steering feel Provides secure motor fan mounting Designed for competitive 22X setups Direct fit for 22X 2WD buggy platforms Includes: (1) Front Low Wing (1) Fan Mount Built for racers who want balanced aero performance and reliable cooling when it matters most.  

Read more less

Improve suspension consistency and eliminate unwanted bind with the Vision Racing (VR) Carbon Front Pivot Brace for the TLR 22X and 22X-T. This precision-cut 2mm carbon fiber brace replaces the stock aluminum unit, which can flex or bend under hard impacts and aggressive racing conditions. By maintaining proper hinge pin alignment, this brace helps keep the front suspension moving freely and consistently, resulting in better handling, improved durability, and more predictable performance on track. Features & Benefits: 2mm carbon fiber construction for strength and rigidity Helps eliminate suspension binding caused by bent stock aluminum braces Maintains proper front hinge pin alignment Lightweight, race-focused design Improves consistency and front-end feel under hard use Compatibility: TLR 22X TLR 22X-T Includes: (1) Vision Racing Carbon Front Pivot Brace A smart performance upgrade for racers looking to tighten up front suspension action and maintain precise geometry throughout a race.        

Read more less

Bellcrank Set Overview:The Team Losi Racing 22X Composite Steering Bellcrank Set is a direct replacement steering component designed to restore smooth, precise steering performance on your 22X buggy. Molded from durable composite material, this bellcrank set delivers reliable steering response while maintaining the lightweight characteristics racers expect from the 22X platform. 🔧 Key Features Direct replacement composite steering bellcrank set Durable composite construction for consistent performance Restores smooth and precise steering feel Designed specifically for the 22X platform 📦 Includes (1) Steering Bellcrank Set 🚗 Compatibility Team Losi Racing 22X platforms Perfect for routine maintenance or race-day repairs, this composite bellcrank set keeps your 22X steering system operating at peak performance.  

Read more less

A simple, essential pit tool for fast and precise adjustments. The Factory Team Aluminum Turnbuckle Wrench is lightweight, durable, and designed to fit 1/8" turnbuckles, making it perfect for quick setup changes at the track or on the bench. Features & Benefits: Precision aluminum construction Lightweight and durable Fits standard 1/8" turnbuckles Compact size—easy to keep in any pit box A must-have wrench for clean, accurate turnbuckle adjustments when it matters most.  

Read more less

Speed up turnbuckle assembly with the FT Ball Cup Wrench—a must-have tool for racers and builders running the 6-series platform. Designed to grip ball cups securely, this wrench makes assembly quick, easy, and consistent. Features & Benefits: Makes assembling turnbuckles fast and effortless Precision fit for 6-series platform ball cups Hard-anodized finish for durability Laser-etched identification Knurled outer diameter for a comfortable, secure grip Lightweight and compact—perfect for the pit box Compatibility: RC10B6 RC10B6D RC10B64 RC10B64D RC10B6 Club Racer RC10B64 Club Racer Pro Tip: Pair it with the #1114 FT Dual Turnbuckle Wrench for the fastest turnbuckle builds possible.  

Read more less

The JConcepts Metal Car Stand is a premium pit accessory designed for racers who demand stability, durability, and a professional workspace. Built from high-quality aluminum, this stand provides a solid platform for both 1/10 and 1/8 scale vehicles while keeping tires off the ground for maintenance, setup, and storage. Its distinctive JConcepts shape features integrated handle cut-outs for easy transport and laser-etched logos for a clean, race-ready look. Whether you’re wrenching at the track or setting up in the shop, this stand delivers the strength and stability serious racers expect. Features All-aluminum construction for strength and durability Suitable for 1/10 and 1/8 scale RC vehicles Elevated height keeps wheels off the ground Integrated handle cut-outs for easy carrying Laser-etched JConcepts logos Stable, wide-base design for pit or bench use Color Options Gray – Part #2903-8 Yellow – Part #2903-9 Includes (1) JConcepts Metal Car Stand Foam stickies for added grip and protection A must-have pit accessory for racers who want a clean, stable, and professional setup—on race day or in the workshop.    

Read more less

Fine-tune your chassis balance with the Team Associated RC10B6.4 Factory Team Steel ESC Weight. Designed as a factory tuning option, this 33-gram steel weight mounts at the ESC location to help lower the center of gravity and improve on-power stability and overall traction. Originally intended for the RC10B6.4 platform, this weight is also compatible with multiple Team Associated vehicles, making it a versatile tuning upgrade for racers looking to dial in handling on different track conditions. Features Genuine Factory Team tuning component 33g steel construction for precise weight placement Improves balance, stability, and traction Ideal for fine chassis tuning on carpet, dirt, or clay Simple bolt-on installation Compatibility Team Associated RC10 B7 (Original) Team Associated RC10 B7D Team Associated RC10 SC7 Team Associated RC10 T7 Team Associated RC10 B6.4 Team Associated RC10 B6.4D Includes (1) Factory Team Steel ESC Weight (33g)

Read more less

The Team Losi Racing TLR-1193 Front Sway Bars Set is an optional tuning upgrade for the 22X 2WD buggy platform. This Odds front sway bar set allows drivers to fine-tune front roll stiffness, improving steering feel, corner entry balance, and overall responsiveness based on track conditions. An effective tuning option for dialing in front-end behavior without altering springs or shock package. 🔧 Features Genuine Team Losi Racing tuning option Front sway bar set for 22X 2WD buggy platforms Odds sway bar configuration Allows precise adjustment of front chassis roll and steering response Ideal for adapting to changing grip levels and track layouts ⚙️ Tuning Effects Softer Sway Bar Increases chassis roll Increases cornering grip Decreases on-power steering Slower response in direction changes Stiffer Sway Bar Decreases chassis roll Decreases cornering grip Increases on-power steering Faster response in direction changes 📦 Includes (1) Front Sway Bars Set ✅ Compatibility Losi 22X Losi 22X-T

Read more less

The Team Losi Racing TLR-1211 Rear Sway Bars Set is an optional tuning upgrade for the 22X 2WD buggy platform. This set allows drivers to fine-tune rear roll stiffness, helping dial in cornering balance, steering response, and overall handling for varying track conditions. Ideal for racers looking to adjust chassis roll and responsiveness without changing springs or shock setup. 🔧 Features Genuine Team Losi Racing tuning option Rear sway bar set for 22X 2WD buggy platforms Allows precise tuning of chassis roll and cornering behavior Ideal for adapting to different grip levels and track layouts ⚙️ Tuning Effects Softer Sway Bar Increases chassis roll Increases cornering grip Decreases on-power steering Slower response in direction changes Stiffer Sway Bar Decreases chassis roll Decreases cornering grip Increases on-power steering Faster response in direction changes 📦 Includes (1) Rear Sway Bars Set ✅ Compatibility Losi 22X Losi 22X-T

Read more less

The Team Losi Racing TLR234132 V2 Adjustable Pivot Insert Set is a replacement and tuning solution for select 22-series and TEN platforms. This updated V2 insert set allows precise adjustment of suspension pivot geometry, giving racers greater control over handling characteristics across a wide range of track conditions. Ideal for maintenance, rebuilds, or expanding setup options on compatible Elite platforms. 🔧 Features Genuine Team Losi Racing replacement and tuning parts V2 adjustable pivot inserts for advanced suspension tuning Enables precise adjustment of pivot geometry Ideal for setup changes, rebuilds, or race-day tuning Direct fit for compatible Losi platforms 📦 Includes (28) Individual Pivot Inserts ✅ Compatibility Losi 22 5.0 Elite Losi 22X Losi 22X-4 Losi 22X-4 Elite Losi 22X-T Losi TEN-SCTE 3.0

Read more less

The Yeah Racing 60-Core High Current Servo Extension Wire is built for RC enthusiasts who demand reliable power delivery and signal integrity over longer distances. Perfect for rock crawlers, touring cars, or scale builds with extended chassis layouts, this heavy-duty extension lead ensures stable performance even under high-load conditions. ⚙️ Features: Designed for RC vehicles with remote servo placement 60-core wire construction supports high current servos Compatible with JR and Futaba-style connectors Provides a clean, secure wiring solution for custom builds Durable, flexible insulation resists wear and heat 📏 Specifications: Length: 150mm Connector Type: JR/Futaba Plug Wire Type: 60-core high-current cable 📦 Includes: (1) Yeah Racing 150mm 60-Core High Current Servo Extension Wire    

Read more less

Precision. Strength. Performance.Keep your Team Associated short course or stadium truck performing at its best with these Rear Suspension Arms (71105). Designed for precise geometry and rugged durability, they deliver consistent handling and reliability on the track or in the dirt. Factory Fit. Race Proven.These genuine Team Associated replacement arms fit both left and right sides and are molded from high-strength composite for balanced flex and long-lasting performance. Ideal for racers and bashers alike looking to restore factory handling and suspension response. 💪 Features: Genuine Team Associated replacement parts High-strength composite material for durability and consistent flex Factory geometry for precise suspension movement Direct fit for multiple RC10 platforms Includes left and right arms 📦 Includes: (1) Left Rear Suspension Arm (1) Right Rear Suspension Arm ✅ Compatibility: Team Associated RC10 SC6.1 Team Associated RC10 SC6.2 Team Associated RC10 T6.1  

Read more less

Take your steering precision to the next level with the XRAY Aluminum Steering Plate Set, designed specifically for the 1-piece chassis. Machined from premium Swiss 7075 T6 aluminum, this set ensures maximum strength, rigidity, and durability under the toughest racing conditions. Features: Swiss 7075 T6 aluminum construction for ultimate durability Black anodized finish with XRAY laser engraving Reinforces the steering system for consistent, precise handling Direct fit for XRAY’s 1-piece chassis design Perfect upgrade for racers demanding maximum performance Compatibility: XRAY XB2 (’21 onwards with 1-piece chassis) XRAY XT2 (’21 onwards with 1-piece chassis) Includes: (1) Aluminum Steering Plate Set

Read more less

Fine-tune your front-end geometry with this Spindle Trail Insert Set from Team Losi Racing. Designed for precision handling adjustments, this set includes four of each: 2mm, 3mm, and 4mm inserts—perfect for dialing in the feel you want on the track. ✅ Includes:• (4) 2mm Inserts• (4) 3mm Inserts• (4) 4mm Inserts Compatible with select TLR 22-series models. A must-have for racers chasing the perfect setup!

Read more less

This is a Reedy Flat Sensor Wire. The flat sensor wires that are included with the Reedy Sonic motor are now available separately in a variety of lengths to suit 1/10 and 1/8 applications! The flat design looks great and provides an extremely clean look. Choose from between 70mm and 270mm lengths.

Read more less

Team Associated 7.8x3.5x2.0mm Aluminum Hub Spacer Washers – Blue (10) – Part 31389Maximum Spacing. Race-Ready Adjustability. The Team Associated 7.8x3.5x2.0mm Blue Aluminum Hub Spacer Washers (31389) are ideal for making larger wheelbase and hub spacing adjustments on RC8B3 and RC8T3 series vehicles—or any platform that uses 3.5mm hinge pins. Durable and lightweight, these aluminum washers are a reliable tuning option for racers who want full control over rear-end geometry. ✅ Size: 7.8mm OD x 3.5mm ID x 2.0mm thick✅ Anodized blue 7075 aluminum – high strength, low weight✅ Designed for wheelbase and hub spacing adjustments✅ Compatible with 3.5mm hinge pin platforms✅ Pairs perfectly with 0.5mm and 1.0mm spacers (sold separately) 📦 Includes: (10) 7.8x3.5x2.0mm Blue Aluminum Hub Spacer Washers Part #: 31389 💡 Pro Tip: Use thicker spacers like this to extend wheelbase for more high-speed stability or track-specific tuning.

Read more less

Team Associated 7.8x3.5x1.0mm Aluminum Hub Spacer Washers – Blue (10) – Part 31388Dial In Wheelbase. Precision You Can Stack. The Team Associated 7.8x3.5x1.0mm Blue Aluminum Hub Spacer Washers (31388) are a smart tuning tool for adjusting wheelbase and hub spacing on RC8B3, RC8T3, and any 1/8 vehicle using 3.5mm hinge pins. These durable, lightweight aluminum spacers help you fine-tune geometry for track conditions or personal preference. ✅ Size: 7.8mm OD x 3.5mm ID x 1.0mm thick✅ CNC-machined blue anodized aluminum – race-grade durability✅ Used for hub spacing and wheelbase tuning✅ Fits RC8B3, RC8T3, and any vehicle with 3.5mm hinge pins✅ Perfect for stacking with .5mm or 2.0mm spacers (sold separately) 📦 Includes: (10) 7.8x3.5x1.0mm Blue Aluminum Hub Spacer Washers Part #: 31388 💡 Pro Tip: Fine-tuning wheelbase can impact rear grip, stability, and overall cornering behavior—stack accordingly for your surface.  

Read more less

Team Associated Rear Hubs Set – RC10B74.1 OEM Replacement for Precision Rear-End Handling The ASC92267 Rear Hubs are a direct replacement for the Team Associated RC10B74.1 and B74.1D 1/10 scale 4WD electric buggies. Built to factory specs, these hubs restore precise suspension geometry and consistent rear-end performance. ⚙️ Features: 🏁 Genuine Team Associated replacement part 🛠️ Maintains proper rear toe and camber link geometry 💪 Durable molded construction for reliable wear resistance 📦 Includes: (1) Left Rear Hub (1) Right Rear Hub ✅ Compatibility: Team Associated RC10B74.1 Team Associated RC10B74.1D Stay dialed and race-ready—replace worn or damaged hubs with confidence.  

Read more less

1up Racing UltraLite 3 Wire Organizer – Clean Wiring, Zero Compromise ⚡ Tidy up your electronics like a pro with the 1up Racing UltraLite 3 Wire Organizer — the perfect blend of style and performance for your wiring setup. Whether you're refreshing your race rig or building from scratch, this lightweight aluminum organizer delivers a clean look without the bulk. 💨 At just 0.59g, it’s engineered to keep things neat without adding drag or weight, making it ideal for serious racers who care about every gram. ✨ Key Features: 🎯 Fits 12–14 AWG Wires – Compatible with wire diameters up to 4.1mm OD🪶 Featherweight Design – Weighs only 0.59g to keep your ride light and fast💎 Anodized Aluminum Finish – Durable, sleek, and track-ready🔌 Organized & Secure – Prevents tangled wires and boosts air circulation📐 Ultra-Clean Aesthetic – Show-quality wiring made easy 📦 What’s in the Box? ✔️ (1) UltraLite 3 Wire Organizer (Anodized Aluminum)

Read more less