⚙️ Precision Gearing. Hardened Steel Strength. Built for Performance. Upgrade your drivetrain with the Hot Racing Mod 0.5 Hardened Steel Pinion Gear—designed for smooth power transfer, precise gear mesh, and long-lasting durability. Manufactured from hardened steel with a blackened finish, these pinion gears are built to handle high-RPM applications and demanding RC conditions with confidence. Available in multiple tooth count options from 16T to 29T, these gears allow racers and bashers to fine-tune acceleration, top speed, and overall drivetrain performance for their specific setup. ⚡ Features: ⚙️ Precision-machined Mod 0.5 pinion gear💪 Hardened steel construction for maximum durability🖤 Blackened finish for improved wear resistance and appearance🔧 Ideal for high-performance RC applications🏁 Available in multiple tooth count options for gearing adjustments🧭 Helps fine-tune acceleration and top speed🚀 Smooth and efficient drivetrain operation 📏 Specifications: Gear Pitch: Mod 0.5Bore Size: 2.3mm (0.090in)Available Tooth Counts: 16T–29TMaterial: Hardened Steel 📦 Includes: (1) Mod 0.5 Pinion Gear(1) 3mm Set Screw 🔧 Perfect For: 🏁 Racing applications💥 High-performance brushless setups⚡ Speed tuning and gearing changes🔧 RC vehicles using 2.3mm motor shafts and Mod 0.5 gearing 💡 Pro Tip: Smaller pinions increase acceleration and motor temps stay lower, while larger pinions increase top speed—always monitor motor and ESC temperatures after changing gearing.

Read more less

🏁⚙️ Fine-Tune Handling & Cornering Performance! The Hot Racing Anti-Roll Sway Bar Set is a performance tuning upgrade designed for the Losi NASCAR and Arrma Typhon Grom platforms. Featuring multiple sway bar stiffness options, this kit allows racers to precisely adjust chassis balance, reduce body roll, and improve cornering consistency for a more planted and predictable driving experience. Whether you're dialing in a race setup or looking for more stability through the turns, this sway bar kit delivers valuable tuning flexibility. 🏁 About the Sway Bar Set ⚙️ Adjustable Suspension Tuning This kit includes three different sway bar diameters, allowing you to adjust front and rear roll stiffness to suit: Track conditions Driving style Tire selection Chassis setup 🏎️ Improved Cornering Stability Proper sway bar tuning helps: Reduce body roll Increase cornering consistency Improve chassis balance Enhance steering response 🔧 Complete Installation Package Includes front and rear mounts, sway bars, sway bar balls, and set screws for a complete tuning solution. 🔧 Features ✔ Adjustable roll stiffness tuning✔ Fine-tunes front and rear suspension response✔ Improves cornering stability✔ Reduces chassis body roll✔ Helps balance steering and rear traction✔ Three sway bar stiffness options included✔ Durable performance upgrade components✔ Designed for competitive tuning applications 📦 Includes (2) 2.0mm Sway Bars (Black) (2) 1.8mm Sway Bars (Chrome) (2) 1.6mm Sway Bars (Gold) (1) Front Sway Bar Mount (1) Rear Sway Bar Mount (4) Sway Bar Balls with Set Screws 🚗 Compatibility Losi NASCAR Arrma Typhon Grom 💡 Perfect For ✔ Oval racing setups✔ NASCAR Grom tuning✔ Typhon Grom handling upgrades✔ Reducing body roll✔ Fine-tuning suspension performance ⚠️ Notes Designed for Losi NASCAR and Arrma Typhon Grom platforms Additional Hot Racing mounts may be required for some Arrma Grom applications Verify compatibility before installation      

Read more less

⚙️ Smoother Power. Stronger Drivetrain. Built for Abuse. Upgrade your Traxxas Mini Maxx drivetrain with the Hot Racing Steel Helical Front Differential Gear Set. Designed with precision-machined helical spiral-cut gears, this heavy-duty upgrade delivers smoother operation, increased durability, and improved torque handling compared to the stock bevel gears. Constructed from high-carbon steel, these gears are built to withstand aggressive bashing, high-power setups, and hard landings while providing quieter and more efficient drivetrain performance. ⚡ Features: ⚙️ Precision-machined helical spiral-cut gear design💪 High-carbon steel construction for maximum durability🔧 Stronger and smoother than stock bevel gears🧭 Improved load distribution for increased drivetrain efficiency🔇 Reduced gear noise compared to straight-cut designs🚀 Handles increased torque and high-power setups more effectively🏁 Perfect for aggressive bashing and upgraded Mini Maxx builds 📏 Specifications: Part Number: HRASMMX9390FRing Gear Tooth Count: 39TPinion Gear Tooth Count: 10TGear Style: Helical Spiral CutMaterial: High-Carbon Steel 📦 Includes: (1) 39T Steel Helical Front Ring Gear(1) 10T Steel Helical Front Pinion Gear 🔧 Compatibility: Traxxas Mini Maxx 💡 Pro Tip: Helical gears help reduce drivetrain noise and improve smoothness under load—making them an excellent upgrade for powerful brushless Mini Maxx setups running larger tires or high-grip surfaces.    

Read more less

Take your X-Maxx or XRT stability to the next level with the Hot Racing Steel HD CV Drive Axles. These heavy-duty axles are designed to increase track width and durability, making them a perfect upgrade for high-speed bashing and aggressive terrain. ⚙️ Wider Stance = More StabilityThese axles extend your vehicle’s width by: +15mm per side +30mm total track width increase This wider stance helps: Reduce rollovers Improve cornering stability Increase overall control at high speeds Perfect for large-scale trucks where stability is everything. 🔩 Heavy-Duty Steel ConstructionBuilt from CNC-machined hardened steel, these CV drive axles are designed to handle extreme power and punishment. The durable black corrosion-resistant finish ensures long-lasting performance even in harsh environments. 🏁 Built for Big PowerWhether you're running high-power setups, big tires, or hard bashing sessions, these upgraded axles provide the strength and reliability needed to keep your drivetrain together. ⚡ Features +15mm per side width increase (+30mm total) Improves stability and reduces rollovers CNC-machined hardened steel construction Durable black corrosion-resistant finish Heavy-duty design for high-power applications Direct upgrade for improved drivetrain strength   📦 Includes (2) Steel HD CV Drive Axles   🔧 Compatibility Traxxas X-Maxx Traxxas XRT   A must-have upgrade for drivers looking to increase stability, widen stance, and strengthen the drivetrain on their X-Maxx or XRT.  

Read more less

⚙️ Built stronger. Built to last. Upgrade your ride with the Hot Racing Front Steel CVD Axle Set, designed for the Losi NASCAR and the Arrma Grom series (Granite Grom, Mojave Grom, Typhon Grom) equipped with the Arrma Grom Suspension B Set. Featuring CNC-machined steel stub shafts and aluminum clamp-style hex hubs, these axles deliver superior strength, durability, and smooth performance over stock CVD dog bones and plastic shafts. ✅ Direct replacement for factory CVD dog bones✅ Heavy-duty CNC steel + aluminum construction✅ Pre-assembled for quick, hassle-free install✅ Compatible with ARA330839 front arms & ARA330841 knuckles✅ Vehicle Compatibility: • Arrma Granite Grom • Arrma Mojave Grom • Arrma Typhon Grom • Losi NASCAR 📦 Includes:• (1) Front Steel CVD Axle Set (pre-assembled)• Aluminum wheel hex hubs 💡 Pro Tip: Apply a light layer of grease to CV joints for maximum performance and longevity.  

Read more less

Upgrade your Arrma Mojave Grom with the Hot Racing Aluminum Front Lower Arm Set — a tough, precision-machined suspension upgrade built to handle the hardest hits and roughest terrain. Crafted from high-quality CNC aluminum, these arms offer a major durability boost over stock plastic components, improving rigidity, handling, and overall suspension accuracy. Whether you're bashing, jumping, or trail-running, these arms help keep your front end planted and predictable. Key Features: ✔️ CNC-Machined Aluminum Construction – Stronger and more rigid than stock composite arms✔️ Improved Handling & Stability – Enhanced suspension precision under load✔️ Anodized Black Finish – Clean, premium look with added corrosion resistance✔️ Direct Replacement Fit – Installs easily with no modifications✔️ Built for Grom Performance – Ideal upgrade for demanding off-road use Includes: (2) Aluminum Front Lower Arms Compatibility: Arrma Mojave Grom (1/18 4WD)    

Read more less

⚙️ Strength where it matters most. Upgrade your rear drivetrain with the Hot Racing Rear Steel CVD Axle Set, built for Losi NASCAR and Arrma Grom series vehicles (Granite Grom, Mojave Grom, Typhon Grom). Crafted from CNC-machined steel and paired with aluminum clamp-style hex hubs, these axles deliver superior strength, smooth operation, and better durability than factory dog bones and plastic shafts. ✅ Direct replacement for stock CVD dog bones✅ Heavy-duty CNC steel construction✅ Pre-assembled for quick installation✅ Aluminum wheel hex hubs for improved reliability✅ Compatible with ARA330840 rear arms & ARA330841 knuckles✅ Vehicle Compatibility: • Arrma Granite Grom • Arrma Mojave Grom • Arrma Typhon Grom • Losi NASCAR 📦 Includes:• (1) Rear Steel CVD Axle Set (pre-assembled)• Aluminum wheel hex hubs 💡 Pro Tip: Apply a light coat of grease to CV joints for smoother performance and extended life. 📦 Includes: • (1) Front Steel CVD Axle Set (pre-assembled)• Aluminum wheel hex hubs 💡 Pro Tip: Apply a light layer of grease to CV joints for maximum performance and longevity.  

Read more less

Dial in your suspension and steering geometry with the Hot Racing Aluminum Adjustable Camber & Steering Links Set, engineered specifically for the Losi NASCAR platform. Designed for precision, durability, and easy tuning, this upgrade gives you greater control over handling and steering response. Machined from durable aluminum, these adjustable links replace the stock components to provide increased strength and more accurate alignment control. Quick camber and toe-in adjustments allow you to fine-tune your setup for different track conditions, improving steering feel, stability, and overall performance. Built for OEM fitment, installation is straightforward and hassle-free. Features CNC-machined aluminum construction for increased strength Adjustable design for precise camber and toe-in tuning Improves steering response and handling consistency Durable upgrade over stock plastic links OEM fit for easy installation and proper geometry Includes (1) Aluminum Adjustable Camber & Steering Links Set A perfect upgrade for racers and drivers looking to improve durability, tuning flexibility, and on-track performance from their Losi® NASCAR.  

Read more less

Upgrade the durability and precision of your Arrma Mojave Grom with the Hot Racing Aluminum Rear Lower Arm Set. Machined from high-strength aluminum and anodized black, these arms offer increased rigidity and improved suspension performance over stock plastic components. Perfect for hard bashers and racers who want a tighter, more consistent feel under high loads. 🟢 Features CNC-machined aluminum construction Durable anodized black finish Increased strength and stiffness compared to stock arms Helps improve handling precision and durability Premium fit and finish 📦 Includes (2) Aluminum Rear Lower Suspension Arms 🔧 Compatibility Arrma Mojave Grom 🏁 Built for Bashers Take control of your suspension and eliminate weak links with this high-quality upgrade from Hot Racing.  

Read more less

Dial in your handling and cornering performance with the Hot Racing Anti-Roll Sway Bar Set for Arrma Grom platforms. This precision upgrade reduces chassis roll and improves stability, giving your rig more control and speed through corners on any surface. Designed for performance tuning, this set allows you to fine-tune front and rear roll stiffness, helping balance your setup for different track conditions. The color-coded sway bars make it easy to identify thickness options at a glance, while the durable, rust-resistant construction ensures long-lasting performance. 🔧 Features:• Designed specifically for Arrma Grom platforms• Improves cornering stability and overall handling• Allows tuning of front and rear suspension stiffness• Color-coded sway bars for quick identification• Durable, rust-resistant construction• Precision fit for consistent performance 📦 Includes:• (1) Front & Rear Anti-Roll Sway Bar Set ⚙️ Specifications:• Material: Aluminum components with steel sway bars ⚠️ Tech Note:• Requires Hot Racing suspension arms (GRM55N01 & GRM56N01)• Not compatible with stock suspension arms ✅ Compatibility:• Arrma Granite Grom• Arrma Mojave Grom Take control of your chassis and carry more speed through the corners with the Hot Racing sway bar set, built for racers who want sharper handling and better overall performance.      

Read more less

🔥 Upgrade Your Steering for Precision and Power Take control of your Losi Mini with the Hot Racing Aluminum Steering Bellcrank. Built from high-quality 6061-T6 aluminum, this upgrade replaces the stock plastic bellcrank to deliver smoother, more precise steering response and unbeatable durability. Whether you're bashing or racing, this is a must-have performance enhancement. ⚙️ Features: CNC-machined 6061-T6 aluminum for maximum strength and style Ball bearing-supported for ultra-smooth steering action Replaces weak factory plastic for improved precision Black anodized finish for a sleek, professional look 📦 Includes: (2) Aluminum Bellcranks (1) Bellcrank Tie Rod (4) Ball Bearings (2) Stainless Steel Bearing Posts Mounting Hardware 🔧 Compatibility: Losi Mini-B Losi Mini-T 2.0

Read more less

⚡ Hot Racing Arrma Granite Grom Aluminum Front Lower Arm Set (Black) ⚡💪 Unmatched Strength & Stability for Your Grom! 💪 Take your Arrma Granite Grom to the next level with the Hot Racing Aluminum Front Lower Arm Set! Built for hardcore bashers, these CNC-machined aluminum arms add serious strength, stability, and style to your 1/18 4WD Monster Truck. 🏆💥 Tackle rough terrain and massive jumps with confidence. The anodized black finish not only gives your rig a sleek, aggressive look but also offers corrosion resistance for all-weather durability. 🌧️☀️ ✅ Key Features: ✨ High-Quality Aluminum Construction – Stronger & tougher than stock🛠️ Enhanced Durability & Rigidity – For superior handling & control⚡ Anodized Finish – Corrosion-resistant with a sleek, pro look🔩 Precision-Engineered Fit – Easy installation & perfect alignment🔧 Pre-Installed Steel Pivot Balls & Mounting Screws – Ready to bash! 📦 Includes: ✔️ (1) Left Front Lower Arm✔️ (1) Right Front Lower Arm✔️ (2) Pre-Installed Steel Pivot Balls✔️ (2) Mounting Screws 🔗 Compatibility: 🔸 Arrma Granite Grom

Read more less

⚡ Hot Racing Arrma Granite Grom Aluminum Front Upper Arm Set (Black) ⚡💪 Stronger, Sleeker, and Built to Perform! 💪 Upgrade your Arrma Granite Grom with the Hot Racing Aluminum Front Upper Arm Set! Engineered for strength, precision, and style, these CNC-machined aluminum arms bring next-level durability and performance to your 1/18 4WD Monster Truck. 🏆💥 Designed to handle the roughest terrains and biggest jumps, the anodized black finish not only adds a sleek look but also protects against corrosion — so you can bash harder, longer, and in any weather. 🌧️☀️ ✅ Key Features: ✨ High-Quality Aluminum Construction – Stronger & tougher than stock🛠️ Enhanced Durability & Rigidity – For better handling & stability⚡ Anodized Finish – Sleek look + corrosion resistance🔩 Precision-Engineered Fit – Easy install & perfect alignment🔧 Pre-Installed Steel Pivot Balls – Ready to drop in 📦 Includes: ✔️ (1) Left Front Upper Arm✔️ (1) Right Front Upper Arm✔️ (2) Pre-Installed Steel Pivot Balls 🔗 Compatibility: 🔸 Arrma Granite Grom

Read more less

🔧 Stronger Steering. Sharper Response. Clean Upgrade. The Hot Racing Aluminum Servo Saver Set is a durable upgrade for Arrma Grom platforms, replacing the stock plastic saver with a more precise and reliable aluminum design. 🏁 About the Aluminum Servo Saver 🎯 Precision & Control CNC-machined for an accurate fit, this servo saver helps improve steering response and consistency—especially in demanding off-road conditions. 💪 Durable Upgrade Constructed from lightweight aluminum, it offers increased strength over stock plastic components while maintaining a clean, premium look. ⚠️ Servo Compatibility Note Designed specifically for 25T spline servos. This will NOT work with the stock Grom servo. 🔧 Key Features ✔ CNC-machined aluminum construction✔ Stronger than stock plastic parts✔ Lightweight design✔ Anodized finish for corrosion resistance✔ Improves steering response and durability✔ Designed for 25T spline servos 📦 Includes (1) Aluminum Servo Saver Set (25T) 🚗 Compatibility Arrma Granite Grom Arrma Mojave Grom Arrma Typhon Grom 🔧 Upgrade your steering. Tighten your control. Drive with confidence.    

Read more less

Eliminate slop and sharpen steering precision with the Hot Racing Aluminum Tight-Tolerance Steering Link Set for the Axial SCX30. Precision-engineered to significantly tighter tolerances than stock links, this upgrade delivers crisper response, better control, and consistent steering feel—especially noticeable in technical crawling. Machined from 6061-T6 aluminum and finished in silver anodizing, the links pair strength with corrosion resistance. Hardened steel pivot balls provide durable, low-friction articulation for smooth, reliable movement under load. Features & Benefits: Precision-engineered tight-tolerance linkage set Reduces steering slop and improves response CNC-machined 6061-T6 aluminum links Silver anodized finish for durability and corrosion resistance Hardened steel pivot balls for smooth, long-lasting articulation High strength-to-weight ratio for performance crawling Compatibility: Axial SCX30 (1/30 scale) Includes: Aluminum steering link set with hardened steel pivot balls A must-have steering upgrade for SCX30 drivers looking for accuracy, consistency, and confidence on the rocks.      

Read more less

Refresh your build with the Hot Racing Steel Hardware Set for the Axial SCX30. This complete replacement kit swaps the factory hardware for durable steel fasteners, improving strength, reliability, and long-term durability—especially important for hard crawling and frequent maintenance. Features & Benefits: Full steel hardware set for added strength Direct replacement for factory screws Improves durability and resistance to stripping Ideal for rebuilds, upgrades, or maintenance refreshes Compatibility: Axial SCX30 (1/30 scale) Includes: Complete steel hardware set for Axial SCX30 A simple, practical upgrade to keep your SCX30 tight, reliable, and trail-ready.  

Read more less

The Hot Racing HRASLF254T is a lightweight aluminum 32-pitch (0.8 module) spur gear designed for Traxxas 1/10 vehicles equipped with slipper clutch transmissions. CNC machined from durable 6061-T6 aluminum and hard anodized in a gunmetal finish, this spur gear provides smooth, consistent power delivery while reducing rotating mass compared to steel options. Ideal for racers and bashers looking to fine-tune drivetrain response without sacrificing fitment or reliability. 🔧 Features CNC-machined 6061-T6 aluminum construction Hard anodized gunmetal finish for durability Lightweight design reduces rotating mass Direct-fit replacement for slipper clutch transmissions 0.8 module pitch (compatible with 32-pitch gearing) 📐 Specifications Number of Teeth: 54 Gear Pitch: 0.8 module (32 pitch compatible) Material: 6061-T6 Aluminum 📦 Includes 54T Aluminum 0.8 Mod Spur Gear ⚠️ Requirements & Notes Designed for vehicles equipped with a slipper clutch transmission Not compatible with center gear differential ✅ Compatibility Traxxas Jato 3.3 Traxxas Rally VXL Traxxas Slash 4X4 Traxxas Stampede 4X4 Traxxas T-Maxx 3.3

Read more less

🌀 Stronger. Smoother. Smarter. Upgrade your Mini Maxx’s drivetrain with the Hot Racing Steel Helical Rear Ring & Pinion Gear Set. Precision-machined from high-carbon steel, this 39T/10T gear combo delivers smoother operation, quieter performance, and higher torque-handling than stock. The helical cut design distributes load more evenly—perfect for high-power setups and serious bashers. ✅ Helical spiral-cut = quieter + smoother power delivery✅ High-carbon steel for extreme durability✅ Handles more torque with fewer teeth✅ Drop-in upgrade for the Traxxas Mini Maxx (rear) 📦 Includes:• (1) 39T Steel Helical Rear Ring Gear• (1) 10T Steel Helical Rear Pinion Gear Tame the torque. Quiet the chaos. Dominate the trail.

Read more less

Take your Mini-T 2.0 to the next level with these Hot Racing Steel Universal Axle Drive Shafts! Designed as a direct replacement for the stock axles, these heavy-duty upgrades deliver increased strength, smoother operation, and long-lasting performance for bashing or racing. 🔧 Features:✅ CNC machined from S2 spring steel for superior durability✅ Replaces factory dogbone and wheel shafts (LOS212013 & LOS212012)✅ Works with stock wheel hex hubs✅ Dogbone pin diameter: 2mm✅ Use light grease to maximize longevity 📦 Includes:(2) Rear Assembled Steel Universal Axle Drive Shafts 🚗 Compatibility:• Losi Mini-T 2.0 2WD

Read more less

⚡ Hot Racing Arrma Granite Grom Aluminum Rear Lower Arm Set (Black) ⚡ 💪 Reinforced Strength & Performance for Your Grom! 💪 Upgrade your Arrma Granite Grom with the Hot Racing Aluminum Rear Lower Arm Set—built for ultimate durability, precision, and performance! These CNC-machined aluminum lower arms offer superior strength and rigidity, improving handling and stability when tackling extreme terrain and big jumps. 🏆💨 With a sleek black anodized finish, these arms provide corrosion resistance and a professional look, ensuring long-lasting performance in any bashing environment. 🌧️☀️ ✅ Key Features: ✨ CNC-Machined Aluminum Construction – Stronger & tougher than stock composite arms🛠️ Increased Rigidity & Durability – For enhanced handling & stability⚡ Anodized Black Finish – Sleek appearance + added corrosion resistance🔩 Precision-Engineered Fit – Direct replacement for factory components🔧 Includes Mounting Hardware – Easy installation for quick upgrades 📦 Includes: ✔️ (1) Left Rear Lower Arm✔️ (1) Right Rear Lower Arm✔️ (2) Mounting Screws 🔗 Compatibility: 🔸 Arrma Granite Grom

Read more less

The Hot Racing HRASJT254 is a hardened steel 32-pitch spur gear designed for demanding 1/10 Traxxas applications. CNC machined from hardened steel and lightened for reduced rotating mass, this 54-tooth spur gear offers exceptional durability and consistent performance under high-power setups. Ideal for drivers looking to replace worn plastic spur gears or upgrade for improved reliability, this spur gear is built to handle aggressive driving while maintaining precise gear mesh. 🔧 Features CNC-machined, lightened hardened steel construction Black oxide coating for corrosion resistance and long service life Includes silver-colored countersunk washers for secure mounting Designed for 32 pitch (0.8 module) gearing setups 📐 Specifications Number of Teeth: 54 Gear Pitch: 32 pitch (0.8 module) Mounting Holes: 3 Tooth Face Width: 6mm (0.24 in) Internal Diameter: ~11mm (~0.43 in) 📦 Includes 54T 32-Pitch Steel Spur Gear (3) Mounting Screws (3) Silver Countersunk Washers (3) Shims (use as needed to prevent screw protrusion through spur mounting plate) ⚠️ Requirements & Notes Requires hardened clutch bell or pinion gear Requires slipper transmission Will NOT work with vehicles equipped with a center gear differential For center-diff vehicles, use Hot Racing SSLF2-series spur gears instead ✅ Compatibility Traxxas E-Revo (1/10) Traxxas Jato 3.3 Traxxas T-Maxx 3.3 Traxxas T-Maxx 2.5R Traxxas Summit (1/10) Traxxas Rally VXL Traxxas Slash 4X4 Traxxas Stampede 4X4

Read more less

💥 Upgrade Your Suspension. Smoother, Stronger, More Adjustable. The Hot Racing 87mm Aluminum Threaded Shocks are a premium suspension upgrade for the Traxxas Mini Maxx. Built from CNC-machined aluminum and delivered pre-assembled, they offer improved durability, smoother performance, and easy adjustability right out of the package. 🏁 About the Aluminum Threaded Shocks ⚙️ Adjustable Performance Threaded bodies and collars allow for quick ride height and preload adjustments, helping you fine-tune suspension for different terrain and driving styles. 💪 Durable Construction Built with aluminum bodies, caps, and shock ends, along with hardened steel shafts, these shocks are designed to handle rough conditions while maintaining consistent performance. 🔧 Ready to Install Pre-assembled design reduces downtime—just fill with your preferred shock oil and get back to driving. 🔧 Key Features ✔ CNC-machined aluminum construction✔ Aluminum bodies, caps, collars, and ends✔ Hardened steel shock shafts✔ Threaded bodies for easy adjustment✔ Locking spring perch for consistency✔ Rebuildable design for long-term use✔ Pre-assembled for convenience 📦 Includes (2) Pre-Assembled Aluminum Threaded Shocks 📊 Specifications Extended Length: 3.43in (87mm) Compressed Length: 2.39in (60.8mm) Shaft Diameter: 0.14in (3.5mm) 🚗 Compatibility Traxxas Mini Maxx (Front or Rear) 💥 Dial in your suspension. Handle more. Drive harder.    

Read more less

Improve stability and cornering performance on your Traxxas Slash 2WD with the Hot Racing Front & Rear Wide Sway Bar Set (HRATE311SLC). Designed to reduce chassis roll and improve handling balance, this sway bar kit helps keep your Slash 2WD planted and predictable through corners. The wide sway bar design increases suspension stability during high-speed turns and aggressive driving, making it a great upgrade for racers and bashers looking to sharpen the handling of their Traxxas Slash. Features• Front and rear sway bar system for improved handling• Wide sway bar design helps reduce chassis roll• Improves cornering stability and control• Durable construction for long-lasting performance• Ideal upgrade for Traxxas Slash 2WD Compatibility• Traxxas Slash 2WD Includes• (1) Front Sway Bar Assembly• (1) Rear Sway Bar Assembly• Installation hardware and components  

Read more less

Add strength and low-mounted weight where it counts with the Hot Racing Brass Center Gearbox Mount for the Axial SCX30. This optional brass skid / gearbox mount increases chassis rigidity while lowering the vehicle’s center of gravity for improved crawling stability and control. Precision CNC-machined from billet brass, it places weight at the lowest point of the chassis to help keep your SCX30 planted on climbs, sidehills, and technical lines. Features & Benefits: CNC-machined from billet brass Adds low-mounted weight at the chassis center Lowers center of gravity (CG) Improves overall stability and handling Increases chassis rigidity Direct-fit upgrade for SCX30 Compatibility: Axial SCX30 (1/30 scale) Includes: (1) Brass center gearbox mount / skid A simple, effective upgrade for SCX30 crawlers looking for more stability, better balance, and a tougher center section.      

Read more less

Add low-mounted weight where it matters most with the Hot Racing Brass Rear Hubs for the Axial SCX30. CNC-machined from solid brass, these hubs increase rear axle weight to improve stability, traction, and overall crawling performance—without adding bulk up high. Each hub adds approximately 4.1g (0.144 oz) per side, helping lower the vehicle’s center of gravity for better control on technical terrain. Features & Benefits: CNC-machined from solid brass Adds 4.1g per side of low-mounted weight Lowers center of gravity (CG) Improves stability and rear traction Direct replacement for factory plastic rear hubs Clean, durable finish for long service life Compatibility: Axial SCX30 Includes: (1) Brass rear hub set A simple, effective upgrade to keep your SCX30 planted and confident on the rocks.

Read more less

Lock in serious traction with the Hot Racing Aluminum Differential Locker Spool for the Arrma Grom lineup. Designed to replace the front or rear diff, this CNC-machined aluminum spool forces both wheels on an axle to rotate together—perfect for crawling, bashing, or low-traction terrain where grip is everything. 🔧 Features: ✅ CNC-machined solid aluminum construction for strength and durability✅ Anodized red finish for corrosion resistance and a sleek look✅ Locks the differential for equal wheel speed and max traction✅ Ideal upgrade for low-traction, off-road environments 📦 Includes: • (1) Aluminum Differential Locker Spool Set 🚗 Compatibility: • Arrma Granite Grom• Arrma Mojave Grom• Arrma Typhon Grom 💡 Note: Recommended for use on loose surfaces. On high-traction terrain, driveline stress may increase.

Read more less

⚡ Hot Racing Arrma Granite Grom Aluminum Rear Upper Arm Set (Black) ⚡ 💪 Precision-Engineered Strength for Ultimate Performance! 💪 Upgrade your Arrma Granite Grom with the Hot Racing Aluminum Rear Upper Arm Set! These CNC-machined aluminum arms provide next-level durability and rigidity, improving handling, control, and stability for intense off-road action. Whether you're taking on rocky terrain, high-speed runs, or massive jumps, these arms are built to handle it all. 🏆💨 The sleek black anodized finish adds a professional, high-performance look while also providing corrosion resistance, ensuring long-lasting durability no matter where you bash! 🌧️☀️ ✅ Key Features: ✨ CNC-Machined Aluminum Construction – Stronger & more durable than stock plastic arms🛠️ Enhanced Rigidity & Stability – Improved control for high-speed and off-road performance⚡ Anodized Black Finish – Sleek & professional look with added corrosion resistance🔩 Precision-Engineered Fit – Direct replacement for stock components🔧 Includes Steel Pivot Balls & O-Rings – Ensures smooth articulation and easy installation 📦 Includes: ✔️ (1) Left Rear Upper Arm✔️ (1) Right Rear Upper Arm✔️ (2) Steel Pivot Balls✔️ (4) O-Rings 🔗 Compatibility: 🔸 Arrma Granite Grom

Read more less

Upgrade your drivetrain strength and durability with the Yeah Racing HD Rear Driveshafts for Traxxas Slash and Stampede 4x4 models. Built for high-performance driving, these shafts combine tool-grade steel components with a lightweight aluminum center section to deliver the perfect balance of strength and reduced rotating mass. Designed to handle demanding conditions, these heavy-duty driveshafts provide improved reliability under power while maintaining smooth drivetrain operation. Available in blue or red anodized finishes, they add both performance and style to your build. 🔧 Features:• Heavy-duty tool-grade steel construction for maximum strength• Lightweight aluminum center shaft reduces rotating weight• Improved durability for high-power and rough driving conditions• Precision fit for smooth and reliable drivetrain performance• Available in blue or red anodized finishes 📦 Includes:• (2) HD Rear Driveshafts ⚙️ Specifications:• Position: Rear• Material: Steel shafts with aluminum center section ✅ Compatibility:• Traxxas Slash 4x4• Traxxas Stampede 4x4 Built for strength and performance, the Yeah Racing HD Rear Driveshafts are a reliable upgrade to keep your drivetrain running strong under the toughest conditions.      

Read more less

Upgrade strength and protection where it matters most with the Hot Racing Aluminum Rear Differential Gear Cover. Designed for the Arrma Grom platform, this CNC-machined upgrade delivers increased durability, improved heat dissipation, and reduced flex for more consistent drivetrain performance. Constructed from high-strength 7075 aluminum, this cover helps protect the rear differential from impacts and wear while keeping temperatures under control during hard runs. The rigid design minimizes flex, improving gear alignment and overall drivetrain efficiency—especially in rough terrain and high-load conditions. 🔧 Features:• Precision CNC-machined 7075 aluminum construction• Provides maximum protection for rear differential components• Helps reduce flex for improved drivetrain performance• Enhances heat dissipation under heavy use• Durable, corrosion-resistant black finish• Easy installation for quick upgrades 📦 Includes:• (1) Aluminum Rear Differential Gear Cover ⚙️ Specifications:• Material: 7075 Aluminum• Color: Black ✅ Compatibility:• Arrma Mojave Grom Built for durability and performance, the Hot Racing rear diff cover is a must-have upgrade to protect your drivetrain and keep your Grom running strong.    

Read more less

Upgrade the strength and performance of your Traxxas Mini Maxx with the Hot Racing Aluminum Shock Tower & Chassis Brace Set. Designed for durability and improved handling, this precision-machined aluminum upgrade reduces chassis flex while reinforcing one of the most critical areas of the truck. Built for aggressive bashing and off-road driving, this upgrade adds rigidity and reliability while giving your Mini Maxx a clean, high-end look. ⚙️ Strength, Stability & Performance This one-piece aluminum assembly replaces the stock components with a stronger and more rigid structure. By reducing chassis flex, it improves suspension consistency and helps the vehicle track better through rough terrain, jumps, and high-speed runs. The rigid design also helps support improved shock performance by maintaining stable mounting points under load. 🔧 Functional Design The smart swing-up design makes battery access easy without sacrificing strength or durability. It also provides additional space for electronics, allowing for cleaner wiring and easier upgrades. Finished in anodized black with machined chamfered edges, the brace delivers both durability and aggressive styling. ⚡ Features Precision CNC-machined aluminum construction Strong one-piece design for maximum rigidity Reduces chassis flex for improved handling stability Enhances shock and suspension performance Adds extra space for electronics and wiring Swing-up design allows quick battery access Anodized black finish with machined chamfered edges 📦 Includes (1) Aluminum Shock Towers & Chassis Brace Set A great upgrade for Mini Maxx owners looking to increase durability, improve handling consistency, and add premium aluminum performance parts to their build.    

Read more less

Sharpen steering response and boost durability with the Hot Racing Aluminum 28T Servo Saver for the Axial SCX30. Precision-machined to tighten up the steering system, this upgrade replaces the stock components with a stronger, more consistent setup built for crawling abuse. Machined from 6061-T6 aluminum and finished in silver anodizing, it includes a silicone servo saver O-ring to maintain proper protection while delivering improved control and reliability. Features & Benefits: CNC-machined from 6061-T6 aluminum 28T spline steering horn / servo saver Includes silicone servo saver O-ring Improves steering response and precision Enhances durability of the servo saver assembly Silver anodized finish for protection and clean looks Compatibility: Axial SCX30 (1/30 scale) Includes: (1) Aluminum 28T servo saver (steering horn) Silicone servo saver O-ring A strong, precise steering upgrade for SCX30 crawlers that demand control without sacrificing servo protection.        

Read more less

Upgrade drivetrain strength where it matters most with the Hot Racing Steel Drive Stub Axles for the Axial SCX30. Engineered for high-stress crawling conditions, these hardened steel axles deliver increased durability, precision, and reliability compared to the stock components. CNC-machined from hardened spring steel, these stub axles are built to handle torque, binding, and repeated impacts—making them ideal for technical crawling and long-term use. Features & Benefits: CNC-machined from hardened spring steel Increased strength and durability over stock axles Precision fit for smooth drivetrain operation Ideal upgrade or replacement for worn or damaged shafts Designed for demanding crawling applications Compatibility: Axial SCX30 (1/30 scale) Fits front and rear axles Includes: Steel drive stub axle set A solid drivetrain upgrade for SCX30 crawlers looking to eliminate weak points and crawl with confidence.        

Read more less

Keep your motor running cooler on long crawls with the Hot Racing Aluminum 9-Fin Motor Heat Sink for the Axial SCX30. Designed as a tight slide-on fit for the stock brushed motor, this heat sink increases surface area to improve heat dissipation and maintain consistent performance. Machined from aluminum and finished in blue anodizing, it adds both function and a clean custom look to your SCX30 build. Features & Benefits: 9-fin aluminum design for improved heat dissipation Slide-on fit for easy installation Designed specifically for the stock brushed motor Blue anodized finish for durability and style Helps reduce motor heat during extended runs Compatibility: Axial SCX30 (stock brushed motor) Includes: (1) Aluminum 9-Fin Motor Heat Sink (Blue) A simple, effective upgrade to help your SCX30 motor stay cooler and perform consistently on the trail.  

Read more less

🔧 Precision. Strength. Style. Upgrade your steering setup with the Hot Racing Aluminum Servo Horn, designed for the Traxxas TRX-4 and TRX-6. CNC-machined from aluminum and finished in anodized blue, this single-arm servo horn provides greater strength and precision over the stock part, while adding a custom look to your rig. ✅ Fits 25T spline servos – Traxxas, ProTek, Futaba, Savox, and more✅ CNC-machined aluminum for durability✅ Anodized blue finish for style✅ M3 diameter linkage holes✅ Direct replacement for Traxxas part TRA8247✅ Vehicle Compatibility: • Traxxas TRX-4 • Traxxas TRX-6 📦 Includes:• (1) Aluminum Servo Horn – 25T (Blue)

Read more less